ECE234 QUIZ 1

1. A TV antenna receives a signal measured at 200mV and is immediately amplified by a pre-amplifier with a 15dB gain. This
amplified signal then passes through a coaxial cable with 3dB loss, what is the resulting input to the TV set, in dBmV?
2. The input is 1 W and the network loss is 27 dB, the output is ____.
3. A combiner has two inputs, +30 dBm and +30dBm, what is the resultant output?
4. A ten times power change in transmission system is equivalent to ___ dB.
5. What is the audio frequency range?
6. The wavelength of a sound of 20kHz frequency is _____.
7. A final amplifier of a radio transmitter draws input current 250 mA of plate current when the plate supply voltage is 1400
volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms,
what is the antenna current at the feed point or output side?
8. What is the electrical wavelength of a 500 MHz signal?
9. If you have available number of power amplifiers with a gain of 100 each, how many such amplifiers do you need to cascade
to give an overall gain of 60 dB?
10. The input is 0.1 W and the network gain is 13 dB, the output is ______.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
ECE234 QUIZ 1

1. A TV antenna receives a signal measured at 200mV and is immediately amplified by a pre-amplifier with a 15dB gain. This
amplified signal then passes through a coaxial cable with 3dB loss, what is the resulting input to the TV set, in dBmV?
2. The input is 1 W and the network loss is 27 dB, the output is ____.
3. A combiner has two inputs, +30 dBm and +30dBm, what is the resultant output?
4. A ten times power change in transmission system is equivalent to ___ dB.
5. What is the audio frequency range?
6. The wavelength of a sound of 20kHz frequency is _____.
7. A final amplifier of a radio transmitter draws input current 250 mA of plate current when the plate supply voltage is 1400
volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms,
what is the antenna current at the feed point or output side?
8. What is the electrical wavelength of a 500 MHz signal?
9. If you have available number of power amplifiers with a gain of 100 each, how many such amplifiers do you need to cascade
to give an overall gain of 60 dB?
10. The input is 0.1 W and the network gain is 13 dB, the output is ______.
--------------------------------------------------------------------------------------------------------------------------------------
ECE234 QUIZ 1

1. A TV antenna receives a signal measured at 200mV and is immediately amplified by a pre-amplifier with a 15dB gain. This
amplified signal then passes through a coaxial cable with 3dB loss, what is the resulting input to the TV set, in dBmV?
2. The input is 1 W and the network loss is 27 dB, the output is ____.
3. A combiner has two inputs, +30 dBm and +30dBm, what is the resultant output?
4. A ten times power change in transmission system is equivalent to ___ dB.
5. What is the audio frequency range?
6. The wavelength of a sound of 20kHz frequency is _____.
7. A final amplifier of a radio transmitter draws input current 250 mA of plate current when the plate supply voltage is 1400
volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms,
what is the antenna current at the feed point or output side?
8. What is the electrical wavelength of a 500 MHz signal?
9. If you have available number of power amplifiers with a gain of 100 each, how many such amplifiers do you need to cascade
to give an overall gain of 60 dB?
10. The input is 0.1 W and the network gain is 13 dB, the output is ______.
--------------------------------------------------------------------------------------------------------------------------------------
ECE234 QUIZ 1

1. A TV antenna receives a signal measured at 200mV and is immediately amplified by a pre-amplifier with a 15dB gain. This
amplified signal then passes through a coaxial cable with 3dB loss, what is the resulting input to the TV set, in dBmV?
2. The input is 1 W and the network loss is 27 dB, the output is ____.
3. A combiner has two inputs, +30 dBm and +30dBm, what is the resultant output?
4. A ten times power change in transmission system is equivalent to ___ dB.
5. What is the audio frequency range?
6. The wavelength of a sound of 20kHz frequency is _____.
7. A final amplifier of a radio transmitter draws input current 250 mA of plate current when the plate supply voltage is 1400
volts. If the plate circuit efficiency is 80% and the transmitter is connected to an antenna having a feed impedance of 70 ohms,
what is the antenna current at the feed point or output side?
8. What is the electrical wavelength of a 500 MHz signal?
9. If you have available number of power amplifiers with a gain of 100 each, how many such amplifiers do you need to cascade
to give an overall gain of 60 dB?
10. The input is 0.1 W and the network gain is 13 dB, the output is ______.
--------------------------------------------------------------------------------------------------------------------------------------