Classification of Missile
Classification of Missile
com
Navigation
Classification of Missile Missile History
Classification
Missiles are generally classified on the basis of their Type, Launch Mode, Range, Propulsion, Warhead
and Guidance Systems. IGMDP
Type:
BRAHMOS Missile
Cruise Missile
Ballistic Missile
Launch Mode:
Gallery
Surface-to-Surface Missile
Surface-to-Air Missile
Surface (Coast)-to-Sea Missile
Air-to-Air Missile
Air-to-Surface Missile
Sea-to-Sea Missile
Sea-to-Surface (Coast) Missile
AERO INDIA 2019
Anti-Tank Missile
Range:
www.brahmos.com/content.php?id=10&sid=9 1/4
11/28/2019 Classification of Missile - BrahMos.com
2) Supersonic cruise missile
Hypersonic cruise missile travels at a speed of more than 5 Mach. Many countries are working
to develop hypersonic cruise missiles. BrahMos Aerospace is also in the process of developing a
hypersonic cruise missile, BRAHMOS-II, which would fly at a speed greater than 5 Mach.
(ii) Ballistic Missile: A ballistic missile is a missile that has a ballistic trajectory over most of its
flight path, regardless of whether or not it is a weapon-delivery vehicle. Ballistic missiles are
categorised according to their range, maximum distance measured along the surface of earth's
ellipsoid from the point of launch to the point of impact of the last element of their payload. The
missile carry a huge payload. The carriage of a deadly warhead is justified by the distance the
missile travels. Ballistic missiles can be launched from ships and land based facilities. For
example, Prithvi I, Prithvi II, Agni I, Agni II and Dhanush ballistic missiles are currently
operational in the Indian defence forces.
(ii) Surface-to-Air Missile: A surface-to-air missile is designed for launch from the ground to
destroy aerial targets like aircrafts, helicopters and even ballistic missiles. These missiles are
generally called air defence systems as they defend any aerial attacks by the enemy.
(iv) Air-to-Air Missile: An air-to-air missile is launched from an aircraft to destroy the enemy
aircraft. The missile flies at a speed of 4 Mach.
(v) Air-to-Surface Missile: An air-to-surface missile is designed for launch from military aircraft
and strikes ground targets on land, at sea or both. The missiles are basically guided via laser
guidance, infrared guidance and optical guidance or via GPS signals. The type of guidance
depends on the type of target.
(vi) Sea-to-Sea Missile: A sea-to-sea missile is designed for launch from one ship to another
ship.
(vii) Sea-to-Surface (Coast) Missile: A sea-to-surface missile is designed for launch from ship
to land based targets.
(viii) Anti-Tank Missile: An anti-tank missile is a guided missile primarily designed to hit and
destroy heavily-armoured tanks and other armoured fighting vehicles. Anti-tank missiles could be
launched from aircraft, helicopters, tanks and also from shoulder mounted launcher.
This type of classification is based on maximum range achieved by the missiles. The basic
classification is as follows:
www.brahmos.com/content.php?id=10&sid=9 2/4
11/28/2019 Classification of Missile - BrahMos.com
(i) Short Range Missile
(ii) Medium Range Missile
(iii) Intermediate Range Ballistic Missile
(iv) Intercontinental Ballistic Missile
(i) Solid Propulsion: Solid fuel is used in solid propulsion. Generally, the fuel is aluminium
powder. Solid propulsion has the advantage of being easily stored and can be handled in fuelled
condition. It can reach very high speeds quickly. Its simplicity also makes it a good choice
whenever large amount of thrust is needed.
(ii) Liquid Propulsion: The liquid propulsion technology uses liquid as fuel. The fuels are
hydrocarbons. The storage of missile with liquid fuel is difficult and complex. In addition,
preparation of missile takes considerable time. In liquid propulsion, propulsion can be controlled
easily by restricting the fuel flow by using valves and it can also be controlled even under
emergency conditions. Basically, liquid fuel gives high specific impulse as compared to solid fuel.
(ii) Hybrid Propulsion: There are two stages in hybrid propulsion - solid propulsion and liquid
propulsion. This kind of propulsion compensates the disadvantages of both propulsion systems
and has the combined advantages of the two propulsion systems.
(iii) Ramjet: A ramjet engine does not have any turbines unlike turbojet engines. It achieves
compression of intake air just by the forward speed of the air vehicle. The fuel is injected and
ignited. The expansion of hot gases after fuel injection and combustion accelerates the exhaust
air to a velocity higher than that at the inlet and creates positive push. However, the air entering
the engine should be at supersonic speeds. So, the aerial vehicle must be moving in supersonic
speeds. Ramjet engines cannot propel an aerial vehicle from zero to supersonic speeds.
(iv) Scramjet: Scramjet is an acronym for Supersonic Combustion Ramjet. The difference
between scramjet and ramjet is that the combustion takes place at supersonic air velocities
through the engine. It is mechanically simple, but vastly more complex aerodynamically than a jet
engine. Hydrogen is normally the fuel used.
(v) Cryogenic: Cryogenic propellants are liquefied gases stored at very low temperatures, most
frequently liquid hydrogen as the fuel and liquid oxygen as the oxidizer. Cryogenic propellants
require special insulated containers and vents which allow gas to escape from the evaporating
liquids. The liquid fuel and oxidizer are pumped from the storage tanks to an expansion chamber
and injected into the combustion chamber where they are mixed and ignited by a flame or spark.
The fuel expands as it burns and the hot exhaust gases are directed out of the nozzle to provide
thrust.
(i) Conventional Warhead: A conventional warhead contains high energy explosives. It is filled
with a chemi al explosive and relies on the detonation of the explosive and the resulting metal
casing fragmentation as kill mechanisms.
(ii) Strategic Warhead: In a strategic warhead, radio active materials are present and when
triggered they exhibit huge radio activity that can wipe out even cities. They are generally
designed for mass annihilation.
(ii) Command Guidance: Command guidance involves tracking the projectile from the launch
site or platform and transmitting commands by radio, radar, or laser impulses or along thin wires
or optical fibres. Tracking might be accomplished by radar or optical instruments from the launch
site or by radar or television imagery relayed from the missile.
(iii) Terrain Comparison Guidance: Terrain Comparison (TERCOM) is used invariably by cruise
missiles. The system uses sensitive altimeters to measure the profile of the ground directly below
and checks the result against stored information.
www.brahmos.com/content.php?id=10&sid=9 3/4
11/28/2019 Classification of Missile - BrahMos.com
(iv) Terrestrial Guidance: This system constantly measures star angles and compares them
with the pre-programmed angles expected on the missile’s intended trajectory. The guidance
system directs the control system whenever an alteration to trajectory is required.
(v) Inertial Guidance: This system is totally contained within the missile and is programmed
prior to launch. Three accelerometers, mounted on a platform space-stabilised by gyros,
measure accelerations along three mutually perpendicular axes; these accelerations are then
integrated twice, the first integration giving velocity and the second giving position. The system
then directs the control system to preserve the pre-programmed trajectory. This systems are
used in the surface-to-surface missiles and in cruise missiles.
(vi) Beam Rider Guidance: The beam rider concept relies on an external ground or ship-based
radar station that transmits a beam of radar energy towards the target. The surface radar tracks
the target and also transmits a guidance beam that adjusts its angle as the target moves across
the sky.
(vii) Laser Guidance: In laser guidance, a laser beam is focused on the target and the laser
beam reflects off the target and gets scattered. The missile has a laser seeker that can detect
even miniscule amount of radiation. The seeker provides the direction of the laser scatters to the
guidance system. The missile is launched towards the target, the seeker looks out for the laser
reflections and the guidance system steers the missile towards the source of laser reflections
that is ultimately the target.
(viii) RF and GPS Reference: RF (Radio Frequency) and GPS (Global Positioning System) are
examples of technologies that are used in missile guidance systems. A missile uses GPS signal
to determine the location of the target. Over the course of its flight, the weapon uses this
information to send commands to control surfaces and adjusts its trajectory. In a RF reference,
the missile uses RF waves to locate the target.
"Make in India' should not be limited to production & manufacturing only, it should also involve generation of
engineering knowledge in the country." - Mr. Sudhir Kumar Mishra
BrahMos Aerospace Private Limited (CIN - U74899DL1995PTC074334) Terms of Use Site Map Contact Us
16, Cariappa Marg, Kirby Place, Cantt, New Delhi 110010
Tel: +91-11-33123000 , Fax: +91-11-25684827, Email - [email protected] Copyright 2016 by BrahMos Aerospace. All Rights Reserved
Contact Person: Mr Praveen Pathak, CGM (MP&E)
www.brahmos.com/content.php?id=10&sid=9 4/4