Scribd
Upload
234 views

Limcon

The document lists 60 references related to structural steel design and connections, including specifications, codes of practice, design guides, and textbooks. Many of the references are published by organizations like the American Institute of Steel Construction, Canadian Institute of Steel Construction, and Steel Construction Institute and focus on topics like bolted and welded connections, moment connections, hollow structural sections, seismic design, and Eurocode standards.

Uploaded by

harishram123456
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
234 views

Limcon

The document lists 60 references related to structural steel design and connections, including specifications, codes of practice, design guides, and textbooks. Many of the references are published by organizations like the American Institute of Steel Construction, Canadian Institute of Steel Construction, and Steel Construction Institute and focus on topics like bolted and welded connections, moment connections, hollow structural sections, seismic design, and Eurocode standards.

Uploaded by

harishram123456
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 12

1.

ANSI/AISC 360-10 – Specification for Structural Steel Buildings


– American Institute of Steel Construction – 2010.

2. CAN/CSA-S16-09 – 2009 – Limit States Design of Steel Structures.

3. BS 5950-1:2000 – Structural Use of Steelwork in Building – Part 1: Code of Practice for Design of Rolled and Welded Sections

4. AS 4100 – 1998 – Steel Structures.

5. NZS 3404:Part 1:1997 – Steel Structures Standard.

6. Steel Construction Manual – 13th Edition


– American Institute of Steel Construction – 2005.

7. Hollow Structural Sections Connections Manual - DETAILS FROM THIS BOOK COVERED IN AISC DG 24
– American Institute of Steel Construction – 1997.

8. Handbook of Steel Construction – 8th Edition


– Canadian Institute of Steel Construction – 2004.

9. Joints in Steel Construction – Moment Connections


– Publication P207 – SSCI & BCSA – 1995.

10. Joints in Steel Construction – Simple Connections


– Publication P212 – SSCI & BCSA – 2002.

11. Design of Structural Connections – 4th Edition


– T.J. Hogan & I.R. Thomas – Australian Steel Institute – 1994.
12. Design of Structural Steel Hollow Section Connections – Volume 1: Design Models – 1st Edition
– A.A. Syam & B.G. Chapman – Australian Steel Institute – 1996.

13. Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings – FEMA-350 – Chapter 3: Connection Qualific
– Federal Emergency Management Agency – 2000.

14. Commentary and Recommendations on FEMA-350


– SEAOC – January 2002.

15. ANSI/AISC 358-05 – Seismic Provisions for Structural Steel Buildings – American Institute of Steel Construction – 2005.

16. ANSI/AISC 341-05 – Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications
– American Institute of Steel Construction – 2005.

17. Seismic Design Manual


– American Institute of Steel Construction – 2006.

18. Flush and Extended Multiple Row Moment End Plate Connections
– T.M. Murray & W.L. Shoemaker – Steel Design Guide 16
– American Institute of Steel Construction – 2002.

19. Extended End Plate Moment Connections – Seismic and Wind Applications – 2nd Edition – T.M. Murray & E.A. Sumner
– Steel Design Guide 4
– American Institute of Steel Construction – 2004.

20. Stiffening of Wide Flange Columns at Moment Connections: Wind and Seismic Applications – C.J. Carter – Steel Design Guide
– American Institute of Steel Construction – 1999.

21. High Strength Bolts – A Primer for Structural Engineers – G.L Kulak
– Steel Design Guide 17
– American Institute of Steel Construction – 2002.

22. Base Plate and Anchor Rod Design – 2nd Edition


– J.M. Fisher & L.A. Kloiber – Steel Design Guide 1
– American Institute of Steel Construction – 2006.

23. Handbook of Structural Steel Connection Design and Details


– A.R. Tamboli – McGraw-Hill – 1999.

24. Limit States Design in Structural Steel – 7th Edition


– G.L. Kulak & G.Y. Grondin
– Canadian Institute of Steel Construction – 2002.

25. Hollow Structural Section Connections and Trusses – A Design Guide – J.A. Packer & J.E. Henderson
– Canadian Institute of Steel Construction – 1997.

26. Steel Designers’ Manual – 6th Edition


– The Steel Construction Institute – 2003.

27. Design Model for Bolted Moment End Plate Connections Using Rectangular Hollow Sections
– A.T. Wheeler, M.J. Clarke, G.J. Hancock, T.M. Murray
– University of Sydney Centre for Advanced Structural Engineering Research Report No. R745 – 1997.

28. Design Model for Bolted Moment End Plate Connections Joining Rectangular Hollow Sections Using Eight Bolts – A.T. Wheele

29. Seismic Behavior and Design of Gusset Plates


– Abolhassan Astaneh-Asl
– Structural Steel Educational Council – 1998.
30. Design of Pinned Column Base Plates – G. Ranzi & P. Kneen
– Australian Steel Institute
– Steel Construction Vol. 36 No. 2 – Sep. 2002.

31. Gusset Plate Connection to Round HSS Tension Members


– J.J. Roger Cheng & G.L. Kulak
– AISC Engineering Journal 4th Quarter – 2000.

32. The Design of Pins – R.Q. Bridge


– Proceedings of the 16th Australasian Conference on the Mechanics of Structures and Materials – 1999.

33. Design of Portal Frame Buildings – 3rd Edition


– S.T. Woolcock, S. Kitipornchai, M.A. Bradford
– Australian Steel Institute – 1999.

34. Handbook 1 – Design of Structural Steel Connections


– T.J. Hogan & S.A. Munter – Australian Steel Institute – 2007.

35. Design Guide 1 – Bolting in Structural Steel Connections


– T.J. Hogan & S.A. Munter – Australian Steel Institute – 2007.

36. Design Guide 2 – Welding in Structural Steel Connections


– T.J. Hogan & S.A. Munter – Australian Steel Institute – 2007.

37. Design Guide 3 – Web Side Plate Connections


– T.J. Hogan & S.A. Munter – Australian Steel Institute – 2007.

38. Design Guide 4 – Flexible End Plate Connections


– T.J. Hogan & S.A. Munter – Australian Steel Institute – 2007.

39. Design Guide 5 – Angle Cleat Connections


– T.J. Hogan & S.A. Munter – Australian Steel Institute – 2007.

40. Design Guide 6 – Seated Connections


– T.J. Hogan & S.A. Munter – Australian Steel Institute – 2007.

41. Design Guide 10 – Bolted Moment End Plate Beam Splice Connections – T.J. Hogan & N. van der Kreek – Australian Steel Inst

42. Design Guide 11 – Welded Beam to Column Moment Connections – T.J. Hogan & N. van der Kreek – Australian Steel Institute

43. Design Guide 12 – Bolted End Plate to Column Moment Connections – T.J. Hogan & N. van der Kreek – Australian Steel Institu

44. Design Guide 13 – Splice Connections


– T.J. Hogan & N. van der Kreek – Australian Steel Institute – 2009.

45. BS EN 1993-1-1:2005 – Eurocode 3: Design of Steel Structures


– Part 1-1: General Rules and Rules for Buildings.

46. BS EN 1993-1-5:2006 – Eurocode 3: Design of Steel Structures


– Part 1-5: Plated Structural Elements.

47. BS EN 1993-1-8:2005 – Eurocode 3: Design of Steel Structures


– Part 1-8: Design of Joints.

48. The Behaviour and Design of Steel Structures to EC3 – 4th Edition
– N.S. Trahair, M,A. Bradford, D.A. Nethercot, L. Gardner
– Taylor & Francis – 2008.
49. Structural Design of Steelwork to EN 1993 and EN 1994 – 4th Edition – Lawrence Martin & John Purkiss – Butterworth-Heinem

50. Designing Compact Gussets with the Uniform Force Method – L.S. Muir – AISC Engineering Journal 1st Quarter – 2008.

51. Effective Length Factors for Gusset Plate Buckling – Bo Dowswell – AISC Engineering Journal 2nd Quarter – 2006.

52. Hollow Structural Section Connections – J.A. Packer, D.R Sherman, M. Lecce – Steel Design Guide 24 – American Institute of

53. Design Guide (1) for Circular Hollow Section Joints Under Predominantly Static Loading – J. Wardenier, Y. Kurobane, J.A. Pac

54. Design Guide (3) for Rectangular Hollow Section Joints Under Predominantly Static Loading – J.A. Packer, J. Wardenier, X.L. Z

55. Steel Structures Design and Behavior – 5th Edition – C.G. Salmon, J.E. Johnson, F.A. Malhas – Pearson Prentice Hall – 2009.

56. Design Guide 7 – Pinned Base Plate Connections for Columns


– T.J. Hogan – Australian Steel Institute – 2011.

57. NCCI: Shear resistance of a fin plate connection


– SN017a-EN-EU – 2005.

58. NCCI: Shear resistance of a simple end plate connection


– SN014a-EN-EU – 2005.

59. CIDECT Report 8G-10/06 – Slotted Connections to Hollow Sections


– G. Martinez-Saucedo & J.A. Packer – 2006.

60. ECCS TC 10 – European Recommendations for the Design of Simple Joints in Steel Structures – 2009.
gn of Rolled and Welded Sections.

RED IN AISC DG 24
- DETAILS FROM THIS BOOK COVERED IN ref 11

– Chapter 3: Connection Qualification

f Steel Construction – 2005.

ames for Seismic Applications

.M. Murray & E.A. Sumner

– C.J. Carter – Steel Design Guide 13


s Using Eight Bolts – A.T. Wheeler, M.J. Clarke, G.J. Hancock – University of Sydney Centre for Advanced Structural Engineering Research Rep
n der Kreek – Australian Steel Institute – 2009.

Kreek – Australian Steel Institute – 2009.

der Kreek – Australian Steel Institute – 2009.


ohn Purkiss – Butterworth-Heinemann – 2008.

Journal 1st Quarter – 2008.

al 2nd Quarter – 2006.

Guide 24 – American Institute of Steel Construction – 2010.

Wardenier, Y. Kurobane, J.A. Packer, G.J. van der Vegte, X.L. Zhao – C I D E C T – 2008.

– J.A. Packer, J. Wardenier, X.L. Zhao, G.J. van der Vegte, Y. Kurobane – C I D E C T – 2009.

– Pearson Prentice Hall – 2009.


uctural Engineering Research Report No. R827 – 2003.

You might also like