Scribd
Upload
267 views2 pages

989 TDS

HB BODY (r) TITLE TECHNICAL DATA SHEET QAFR02A DATE OF ISSUE DOCUMENTCODE PRODUCT PRODUCT DESCRIPTION 2K epoxy primer. Yellow. Anticorrosive epoxy primer for metal surfaces.

Uploaded by

Achilles Nizamopoulos
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
267 views2 pages

989 TDS

HB BODY (r) TITLE TECHNICAL DATA SHEET QAFR02A DATE OF ISSUE DOCUMENTCODE PRODUCT PRODUCT DESCRIPTION 2K epoxy primer. Yellow. Anticorrosive epoxy primer for metal surfaces.

Uploaded by

Achilles Nizamopoulos
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HB BODY S.A.

HB BODY ® QUALITY ASSURANCE DEPARTMENT

TITLE TECHNICAL DATA SHEET

DOCUMENTCODE QAFR02A DATE OF ISSUE 23.10.01 CLASSIFICATION CODE FR

PRODUCT : BODY 989 YELLOW

PRODUCT CODE: 989.03.0000.1 SPECIFICATION CODE: QASP001A DATE: 30.10.2006

GENΕRAL PRODUCT DESCRIPTION


System Description 2K epoxy primer.
Shade Yellow.
Application Field(s) Anticorrosive epoxy primer for metal surfaces.

CHARACTERISTIC TECHNICAL DATA


PROPERTY UNIT DRY FILM MEASURE- VALUE STANDARD
THICKNESS MENT
[μm] AFTER
Specific gravity g/cm3 - 1.65±0.10 DIN 53 217
Maximum particle size μm - < 10 DIN EN 21 524
Total solids (w/w) % - 69±5 DIN EN ISO 3251
ο
Flash Point C - 23 DIN EN 456
ο
STORMER Viscosity (20 C±0.5) KU - 85-120 DIN 53 211
Dry-to-the-touch (23ο C±0.5) min 90 240
Full hardness (23ο C±0.5) hrs 90 20-24
ο
Full hardness ( 60 C±2 ) hrs 90 1
Full hardness according to KOENIG sec 90 48 h 26±2 DIN 53 157
2
Theoretical Spreading Rate m /l 90 6.7
Total content of C: kg/kg 0.283 DIN EN ISO 3251

MECHANICAL PROPERTIES
PROPERTY UNIT DRY FILM MEASUREMENT VALUE STANDARD
THICKNESS [μm] AFTER
Εlasticity acc. to ERICHSEN mm 90 24 h >8 DIN EN ISO 1520
o
Bending test acc. to MANDREL 90 24 h 0 passes DIN EN ISO 1519
Impact Test cm 90 24 h 25
Cross cut GT 90 24 h 0 DIN EN ISO 2409
HB BODY S.A.
HB BODY ® QUALITY ASSURANCE DEPARTMENT

TITLE TECHNICAL DATA SHEET

DOCUMENTCODE QAFR02A DATE OF ISSUE 23.10.01 CLASSIFICATION CODE FR

CHEMICAL RESISTANCE
PROPERTY UNIT MEASUREMENT EXPOSURE TIME RESULT
AFTER [hours]
Salt spray test ASTM B-117-90 hours 48 h 500 Good
Q-UV hours
Water hours 48 h 500 no change
Motor Oil hours 48 h 24 no change
Diesel Oil hours 48h 20 min no change
Unleaded Gasoline (Super) minutes 48 h 20 min no change
ΝαΟΗ 0.5% minutes
Η2SO4 10% minutes

PRETREATMENT AND APPLICATION OF THE MATERIAL


Hardener addition Paint : Hardener = 4:1 v/v
Τype of hardener BODY 989 EPOXY HARDENER Product Code 732.03.0000.0
Thinner Addition [%] 20-30
Τype of thinner EPOXY THINNER Product Code 755.00.0000.1
BODY ACRYL THINNER NORMAL 740.00.0000.1
Application Viscosity DIN 53 211 Cup4 [sec] 29 sec Temperature (23ο C±0.5)
Pot life [hrs] 24
Repaintable after [hrs] 2
Mode of Application Spray gun
Spray Gun Nozzle diameter [mm] 1.5 - 1.8 (3-5 bar)
Suggested dry film thickness [μm] 60-90

STORAGE
Maximum Storage Time (months) 24
ο
Recommended Storage Temperature [ C] +5 to +25

DIRECTIONS FOR USE


Remove all oils, fats and dirt from surfaces to be painted. Mix the can content with BODY 989 EP HARDENER at a ratio of 4:1 v/v using
the special mixing ruler adding 20% of BODY EPOXY THINNER. Mix well and filter through paper. Apply with a spray gun of a nozzle
diameter 1.5-1.8 mm. We recommend the film thickness not to exceed 60-90 μm.
Flammable. Use only in well ventilated areas. Do not drink/eat, avoid any inhalation of vapour and skin contact.
Keep out of reach of children.

You might also like