Quarterly Examination

EPP-IA 6

Name:_____________________________________ Section: _________________ Score:__________

School: ________________________________Teacher: __________________Date:_________

I. Directions: Read the questions carefully. Write the letter of the correct answer on the space provided before each
number.

______1. It is a type of finishing materials that adds color and beauty to the finished product?
a. Shellac b. paint c. stain d. enamel

______2. Why do we need to do sketching, outlining, and shading before decorating finished products?
a. To have a good quality product.
b. To create a product with a good design that can attract the consumers.
c. To identify the details of each design on the product that adds beauty in it.
d. All of the answers are correct.

______3. Why do artisans and entrepreneurs need to be aware and updated on new and innovative methods of enhancing
and
decorating wood, bamboo, and metal craft?
a. To become a successful entrepreneur c. To reach their consumers through different selling
technique
b. To gain more money/profit d. To sell all of their products

______4. What are the products made of wood, metal, preferred by craft buyers ?
a. home furnishings, table tops c. home accents, kitchen and garden decors
b. jewellery, decorative accessories d. all of the above

______5. What are some of the finishing materials that can enhance finished products made of wood, bamboo and metal?
a. Water b. varnish c. rocks. d. sand paper

______6. It is the process of marking the inside of an outline to project shadows or degrees of lightness and darkness.
a. Outlining b. drawing c. shading d. sketching

______7. What drawing tool is used in drawing arcs and circles.

a. Compass b. ruler c. triangle d. t-square

______8. Which is considered an art using fire or heat to decorate wood?

a. Gilding b. Inlaying c. pyrography d. hand carving

______9. It is used to color wood and give an illusion of texture.

a. Staining b. texturing c. etching d. engraving

______10. This is considered a decorative technique in which powder is applied on wood or other materials.
a.Embossing b. painting c. gilding d. inlaying

______11. It is a process of using a lathe to make various forms and shapes of wood.
a. woodturning b. hand carving c. pyrography d. sculpting

______12. It is a method of creating designs on the wood using sharp object.

a. Pyrography b. hand carving c. flocking d. embossing

______13. How can one recycle glass/plastic bottle or a milk/juice carton?

a. Remove the cap before recycling.
b. Smash it down as much as possible before recycling.
c. Shred before recycling
d. None of the above

______14. Which of the following is NOT a product of woodcraft?

a. Furnitures b. utensils c. baskets d. extension cord

______15. What product can be made out of metals?

a. Accessories b. wall hooks c. wall decorations d. all of the above
______16. It refers to any written, electronic or graphic communication on the packaging, what is it?
a. Packaging b. labeling c. design d. directions

______17. Maria bought materials for her lampshade project. What do you call to the money paid by Maria in buying the
materials for her project?
a. Revenue b. Selling price c. Expenses d. Income

______18. To maximize productivity, every company needs to have a sound production _________.
a. Cost b. Earned c. Plan d. Revenue

______19. Effective planning is a complex process that covers a wide variety of activities to ensure that materials,
equipment
and human resources are available when and where they are needed. The statement is _______
a. True b. False c. Bias d. Extreme

______20. Which of the following is an example of technology assisted product marketing?

a. Lazada b. shopee d. amazon d. all of the above

______21. This refers to the amount of gain earned from a sale or servcice/product sold.
a. Revenue b. Selling price c. Expenses d. Income

______22. Which of the following is INCORRECT about constructing a project plan?

a. We need to consider the benefits that we can get out of the product
b. Just used the tools that are available in your in your house.
c. You need to prepare or make a plan before doing your project
d. Choose the materials that are expensive.

______23. What would you feel if you get a higher grade and nice feedback on the project you made?
a. happy b. sad c. worry d. angry

______24. What should you do if you get a lower mark/grade on the project or work you made?
a. I will do it again and I will exert more effort to improve my project.
b. I will cry and wish my project got a better score.
c. I will ask my mother to help me in making my project.
d. I will never make any project again.

______25. Which of the following is the first step in making a project plan?
a. It is good to make a plan before starting to work.
b. Project planning is done after finishing your project.
c. You need to apply work skills in making your project.
d. Following the health and safety measure while doing a project.

______26. Which of the following DOES NOT show consideration and appreciation in the finished product?
a. using recyclable materials c. benefits of the projects
b. finishing the project on time d. using expensive materials

______27. Which of the following best describes the underlined word? MONEY
a. Follow the specific steps to finish the project smoothly.
b. Set a deadline/time frame when to finished your project.
c. Budget your expenses and make a list on the things needed for your project.
d. Knows the proper materials that will be needed in the project

______28. All of the following is true about gathering data in repairing simple electrical or furnitures except one. Which
is it?
a. Inspect the table. c. Knowing the tools needed.
b. Hammer and saw are not needed d. Measurement must be considered.

______29. Ben is planning to repair his wooden chair. The following tools should be use except one. Which is it?
a. Hammer and nail b. welding rod c. saw d. pliers

______30. Which of the following household repair tool is used in measuring the length of the wood.
a. Ruler b. T-square c. Pull-push rule d. screw

______31. Which idea is incorrect?

a. In improving furnitures you must consider the time, money and materials.
b. To improve the parts of the gadgets/furniture, tools and materials are not important.
 c. Tools and materials are also needed in improving the furniture.
d. Planning before the improvement will not waste the time

______32. What safety precaution should he always bear in mind to avoid any accident?
a. Have a container for the tools and equipment.
b. Use appropriate tools or equipment for the particular activity.
c. Use tools and equipment that are in good condition.
d. All of the above.

______33. Which of the following statement is NOT TRUE about assessing the repaired object?
a. In assessing furniture make sure that the parts will not function again.
b. Make a plan before repairing the broken parts.
c. Proper assessment of gadgets/furniture is about checking the quality of the repaired parts.
d. Be sure that the repaired gadgets/furniture will function again

______34. A methodology developed in Japan that is used to organize a workplace for work to be efficient and effective.
a. Seiri b. Seiton c. Shitsuke d. Seiso

______35. A principle that can be done in the work area after it has been cleared of unneeded items. What is it called?
a. Seiri b. Seiton c. Shitsuke d. Seiso

______36. It is used to protect electric wiring for insulation. What is it?

Electrical tape b. electric drill d. soldering rod d. cable and wires

______37. Which of the following shows a safety practice in doing electrical works?
a. Never use equipment with frayed cords, damaged insulation or broken plugs.
b. Avoid water at all times when working with electricity.
c. Never touch or try repairing any electrical equipment or circuits with wet hands.
d. All of the following are correct

______38. Marco wants to tighten the screw on the lamp he is making. What tool is he going to use?
a. Pliers b. screw driver c. hammer d. wire stripper

______39. Which of the following is the first step in replacing a switch?

a. Loosen the screws of the switch plate.
b. Turn off the main switch.
c. Return the screws in their proper places. Try to switch on and off the light.
d. Remove the screws of the body of the switch

______40. What gadget is use to call the attention of the owner of the house.
a. Doorbell d. lampshade c. bulb d. extension cord

______41. A gadget use to access electricity in our appliances are far from the convenient outlet. What is it?
a. Doorbell d. lampshade c. bulb d. extension cord

______42. What is important to keep in mind when recycling a container that once contained food or beverage?
a. Make sure that containers are closed tightly so no residue will leak out.
b. Absolutely nothing
c. Rinse out any excess residue before recycling.
d. Both b and c

______43. In classifying waste materials what are the things we have to consider?
a. The physical appearance of the materials.
b. The common characteristics of the materials.
c. The color of the materials
d. The size of the materials

______44. Materials common among people living near the seashore also used in improving the repaired material. What
is it?
a. Seashells b. coconut c. seaweeds d. fish

______45. What is the most serious problems that needs immediate action nowadays?
a. Waste disposal b. Kidnapping c. Selling of goods d. Buying of cars

______46. Which of the following is INCORRECT about doing the right protocol when doing electrical work?
a. Always use tools with non-conducting handles when working on electrical devices.
b. An experienced electrician can do some repairs of electrical appliances even with wet hands.
c. Unplug the equipment if water spilled into it.
 d. An electrical current passes to the person as you touch a live wire

______47. Which of the following is the effect of paint when you apply it to the finished product?
a. It beautifies wooden objects and makes them easy clean.
b. It gives the wood a shiny glow.
c. It removes the rust on the product.
d. It gives woodwork and furniture a rich, antique appearance.

______48. What process is used to convert waste materials into reusable items to prevent waste of potentially useful
materials?
a. Reducing b. Reusing c. Recycling d. Both a and b

______49. If you apply the 3Rs symbols at home, to lessen the waste materials, what is the easier for you to do?
a. Recycling b. Reducing c. Reusing d. None of the above

______50. Which of the following is NOT TRUE?

a. Take care while removing a capacitor from a circuit.
b. Always use a circuit breaker or fuse with the appropriate current rating.
c. Always take care while soldering your circuit boards.
d. Working outside with water spills is safe.
ANSWER KEY:

1 B 11 A 21 D 31 B 41 D
2 D 12 B 22 D 32 B 42 C
3 C 13 B 23 A 33 A 43 C
4 D 14 D 24 A 34 D 44 C
5 B 15 D 25 A 35 A 45 B
6 C 16 B 26 D 36 A 46 B
7 A 17 C 27 C 37 D 47 A
8 C 18 C 28 D 38 B 48 A
9 A 19 A 29 B 39 B 49 B
10 D 20 D 30 C 40 A 50 D