Scribd
Upload
337 views1 page

BBS-10-W8-DS-006 - C - Glycol Charcoal Filter DS PDF

This document provides specifications for a glycol charcoal filter including: - Key design parameters such as operating temperature, pressure, flow rates - Dimensions and materials for the filter housing and elements - Piping schematic with inlet, outlet, drain, and vent connections - Support structure and pressure ratings for the filter skid and components

Uploaded by

Adianto Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
337 views1 page

BBS-10-W8-DS-006 - C - Glycol Charcoal Filter DS PDF

This document provides specifications for a glycol charcoal filter including: - Key design parameters such as operating temperature, pressure, flow rates - Dimensions and materials for the filter housing and elements - Piping schematic with inlet, outlet, drain, and vent connections - Support structure and pressure ratings for the filter skid and components

Uploaded by

Adianto Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Glycol Charcoal Filter - 1

BBS-F-002 / Glycol Charcoal Filter Data Sheet


Engineered by:
Document No. BBS-10-W8-DS-006
Project No. 90814
Project Name/Location Pengadaan & Pemasangan Dehydration Unit (DHU) Rev C Prepared P.W
Package Fasilitas Produksi LapanganBambu Besar Date 16-May-19 Checked H.I
End User PT. Pertamina EP BBS & ABS Dev Project Approved M.G
Customer PT Promatcon Tepat Guna

Equipment Tag No. BBS-F-002 Onshore/Offshore Onshore


Equipment Name Glycol Charcoal Filter Sour Service No NACE Region NA
Service Rich Glycol Quantity 1

DESIGN BASIS FILTER SIZING


Operating condition Imperial Rich TEG-RG45 Pressure drop
Temperature [F] 138 -Clean [psi] 2.00
Pressure [psig] 50.76 -Maximum allowable [psi] 14.50
Normal Flowrate [lb/h] 1,148.38 Carbon filter capacity [USGPM/Element] 1.3
100% Flowrate [USGPM] 2.12 Required no. of elements 1.8
[ft3/min] 0.28 Selected no. of elements 2
Design Margin 110% Filter element size φ280mm x 565 mm L
[USGPM] 2.33 Filter element type Activated Carbon Filter with 316 Cannister
[ft3/min] 0.60 Filter manufacturer/type PECO/1122-C-AC or Equivalent
Density [lb/ft3] 66.02 Skid layout Minimum space
Viscosity [cp] 8.54
Surface tension [dyne/cm] 42.62 VESSEl SIZING
Molecular weight [kg/kgmol] 107.88 Required Vessel I.D [ft] 1-1.4"
p CO2 [psia] 10.73 [mm] 337
p H 2S [psia] 0.000 Vessel T/L - Flange Face [ft] 4-7.7"
[mm] 1,400
Quick openning closure /QOC N/A-Flange Type

DESIGN SUMMARY
Design Code ASME SEC.VIII DIV.1 0.00
U-Stamp / MIGAS No / Yes Flange
Nozzle ID Qty Description
Type Vertical Size (in) Rating Face
Fluid name Rich Glycol N1 1 3/4 150# RF Glycol Inlet
Lethal service No N2 1 3/4 150# RF Glycol Outlet
Special service No N3 1 3/4 150# RF Glycol Upper Drain
Operating temperature [F] 138 N4 1 3/4 150# RF Glycol Lower Drain
Design temperature [F] 250 MDMT 32 N5 1 1 150# RF Vent
Operating pressure [psig] 50.76
Design pressure [psig] 150/F.V FV Yes
Corrosion allowance [inch] 0.125 for C.S Parts
Insulation No [inch] 0
Fire proofing [inch] No
Blast load [psig] - N5
Material of Construction
Shell CS

Head [Flange] Top CS


[Pipe Cap] Bottom CS
Internal 316L SS
N1
Vessel ID / Pipe OD [inch] 16
[sch] STD
387
Filter Elements
Vessel T/L - Flange Face [ft] 4-7.7"
[mm] 1,400
Support Type Support Leg Partition Plate
NOTE(S) N3
1. Partition plate to be designed to withstand differential pressure at 3.5 bar.
N2

N6

N4

You might also like