Scribd
Upload
89 views14 pages

Power Electronics Lab2013

The document outlines 19 experiments to be conducted on various electrical and electronic devices and circuits. Each experiment involves drawing the circuit diagram, outlining the connections and procedures, obtaining and graphing the results, recording observations, and being questioned about the experiment in a viva. The experiments cover topics like steady state and turn-on characteristics of uni-directional and bi-directional current and voltage controlled devices, advantages of BJT and MOSFET devices, DC-DC converters, PWM inverters, thyristor converters, and static characteristics of semiconductor devices.

Uploaded by

rangarajan691174
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
89 views14 pages

Power Electronics Lab2013

The document outlines 19 experiments to be conducted on various electrical and electronic devices and circuits. Each experiment involves drawing the circuit diagram, outlining the connections and procedures, obtaining and graphing the results, recording observations, and being questioned about the experiment in a viva. The experiments cover topics like steady state and turn-on characteristics of uni-directional and bi-directional current and voltage controlled devices, advantages of BJT and MOSFET devices, DC-DC converters, PWM inverters, thyristor converters, and static characteristics of semiconductor devices.

Uploaded by

rangarajan691174
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 14

1. Conduct a suitable experiment for a uni-directional current controlled device and draw the steady state characteristics.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

2. Conduct a suitable experiment for a bi-directional current controlled device and draw the steady state characteristics.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

3. Conduct a suitable experiment for turn-on characteristics of a uni-directional current controlled device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER


4. Conduct a suitable experiment for a uni-directional voltage controlled device and draw the steady state characteristics.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

5. Conduct a suitable experiment for turn-on characteristics of a uni-directional voltage controlled device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

6. Conduct a suitable experiment to show the advantages of both BJT and MOSFET of a device and draw the steady state
characteristics

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER


7. Conduct a suitable experiment to prove that the o/p DC voltage is greater than i/p DC voltage of a device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

8. Conduct a suitable experiment to prove that the o/p DC voltage is lesser than i/p DC voltage of a device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

9. Conduct a suitable experiment using series resonant DC-DC converter of a device

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER


10. Conduct a suitable experiment using parallel resonant DC-DC converter of a device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

11. Conduct a suitable experiment for a single phase PWM inverter. (both Multiple and Sine PWM method)

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

12. Conduct a suitable experiment for three phase PWM inverter.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER


13. Conduct a suitable experiment for a two pulse converter using 2 SCR’S and 2 Diodes.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

14. Conduct a suitable experiment for a two pulse converter using 4 SCR’S.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

0
15. Obtain the output voltage waveform of a single phase converter which has four controllable devices. Take α =30 for
0
R load, α = 60 for RL Load.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION
(5) (30) (30) (15) (10) (10) (100)
INTERNAL EXAMINER EXTERNAL EXAMINER

16. Obtain the output voltage waveform of a single phase converter which has two controllable devices.
0 0
Take α = 65 for R Load, α =90 for RL load.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

17. Obtain the V-I static characteristics of a three junction, four layer and unidirectional current controlled device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER


18. Obtain the V-I static characteristics of a three terminal bidirectional current controlled device

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

19. Obtain the transfer and output characteristics of an unipolar voltage controlled device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

20. Obtain the transfer and output characteristics of an unipolar voltage controlled device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)


INTERNAL EXAMINER EXTERNAL EXAMINER

21. Draw the output waveforms of a buck- boost converter by conducting suitable experiment.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

22. Control the output voltage of a three phase Inverter using PWM technique and draw the waveforms.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

23. Control the output voltage of a single phase Inverter using PWM technique and draw the waveforms.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION
(5) (30) (30) (15) (10) (10) (100)
INTERNAL EXAMINER EXTERNAL EXAMINER

24. Obtain the output voltage of resonant converter and draw the waveforms.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

25. Conduct a suitable experiment for a single phase PWM inverter. (both Multiple and Sine PWM method)

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

26. Conduct a suitable experiment for three phase PWM inverter.


CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

27. Conduct a suitable experiment for a two pulse converter using 2 SCR’S and 2 Diodes.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

28. Conduct a suitable experiment for a uni-directional current controlled device and draw the steady state characteristics.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER


29. Conduct a suitable experiment for a bi-directional current controlled device and draw the steady state characteristics.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

30. Conduct a suitable experiment for turn-on characteristics of a uni-directional current controlled device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

31. Conduct a suitable experiment to show the advantages of both BJT and MOSFET of a device and draw the
steady state characteristics

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)


INTERNAL EXAMINER EXTERNAL EXAMINER

32. .Draw the output waveforms of a buck- boost converter by conducting suitable experiment.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

33. Conduct a suitable experiment for a uni-directional current controlled device and draw the steady state characteristics.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

34. Conduct a suitable experiment for a bi-directional current controlled device and draw the steady state characteristics.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)


INTERNAL EXAMINER EXTERNAL EXAMINER

35. Conduct a suitable experiment for turn-on characteristics of a uni-directional current controlled device.

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION

(5) (30) (30) (15) (10) (10) (100)

INTERNAL EXAMINER EXTERNAL EXAMINER

36. Conduct a suitable experiment using series resonant DC-DC converter of a device

CIRCUIT PROCEDURE, GRAPH &

AIM DIAGRAM CONNECTIONS RESULT RECORD VIVA TOTAL

&CALCULATION
(5) (30) (30) (15) (10) (10) (100)
INTERNAL EXAMINER EXTERNAL EXAMINER

You might also like