A List of Programmable and Non Programmable KBC Microcontroller
A List of Programmable and Non Programmable KBC Microcontroller
Login
or
Join
Menu
HOME
PRICING
LAPTOP REPAIRING
MOBILE REPAIRING
FILE REQUEST
CONTACT US
FAQ
Comments
fauzanmint
it8502e ?
fauzanmint Replay
bioshunger
According to datasheet MEC1404 is not programmed. It runs through the program, which
loads from external memory chip.
It can be swapped without programming.
bioshunger
Replay
Dexas
if IO IC is not programmable, that means that i can just solder a new one in place and it will
work fine, or its a dead motherboard which i cant repair?
Dexas
Replay
Dexas
NPCE285PA0DX not programmable,that means its a dead motherboard, or i can solder a new
chip from ebay and it will work?
Dexas
Replay
Monireh Makhour
Dear Dexas, If you’re sure the problem is IO, it won’t damage the motherboard if you carefully
replace it and also pay attention to its code. There is usually an eeprom (other than Bios IC)
Monireh
near non-programmable I/Os. And the data is saved inside that eeprom.
Please tell us what
Makhour
the problem is, so we can help you more :)
Replay
Dexas
Well, so far couldnt locate the eeprom, but its might be there :) Problem is that IO makes dead
short for 3.3V line. Using PSU instead of battery, its a constant 150mA draw without doing
Dexas
anything, found out that TI smps controller is getting hot. After checking, found out that its LDO
3.3V line is shorted to ground. By voltage insertion method, found that IO is shorting that line to
ground - removed IO, short is gone.. Now waiting for "new" IO's to arrive from china. In the
meantime having 2nd laptop, whos problem im not sure yet about. Dell inspiron 3542 (cedar
13269-1 fx3mc) Not sure about power on (by battery indication led would say its alive), but still
- no beeps, no video. No beeps even when RAM is taken out, so considering that it might be
IO too..
Replay
Monireh Makhour
For the first device: Make sure to check ohm before doing anything. And find the shorted
direction using boardview or schematic. Because 3.3V direction goes to many parts and other
Monireh
blocks might have been damaged as well.
Makhour
Second device: First you need to check ohm & voltage. And if all voltages are present, test
CPU and RAM first, and then program Bios and after making sure of Bios, I should say that the
problem can be generated from chips (IO, PCH...) and signal direction. So they need to be
checked accurately :)
Replay
Dexas
first device: Short is on aux 3.3V line, which goes directly to IO. After taking off IO IC short is
gone. For the second device - it seems like All_Sys_pwr_good is missing, but still not sure
Dexas
about VCC_GFXCORE, because dont have a boardview for that model, and schematics
doesnt show neither its creation nor where it goes (cedar 13269-1 fx3mc) dell inspiron 3420
Replay
Submit
Headlines
Downloading Mode And Recovery Mode In Samsung Phones And Tablets 2 years ago
What Is Binary And What Is Its Importance? 1 day ago
Dr-Bios.Com Online Exam Results 12 days ago
How To Repair Monitor 11- Analysis Of Mainboard Signal Block 2 months ago
How To Troubleshoot OFF Laptop In Simple Terms 2 months ago
What Is Rooted Kernel File And Its Usages (Download Auto Kernel Files For Free) 2 months ago
© 2019 Dr-Bios.com
About
Contact
Terms & Conditions
Cancellation And Refund Policy
Privacy & Cookies