Scribd
Upload
4K views

Norton Theorem Question

This document contains instructions for solving various circuit analysis problems using different techniques like Norton's theorem, Thevenin's theorem, and superposition. The problems involve finding voltages or currents at specific points in circuits given in figures using these theorems. The document also asks to explain why a Norton equivalent circuit was derived by breaking the network at a specific resistor.

Uploaded by

Awais Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views

Norton Theorem Question

This document contains instructions for solving various circuit analysis problems using different techniques like Norton's theorem, Thevenin's theorem, and superposition. The problems involve finding voltages or currents at specific points in circuits given in figures using these theorems. The document also asks to explain why a Norton equivalent circuit was derived by breaking the network at a specific resistor.

Uploaded by

Awais Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

5.47 Find V0 in the network in Fig. P5.47 using Norton's theorem.

5.47 Find V0 in the network in Fig. P5.47 using Norton's theorem.


5.5 In the network in Fig. P5.5, find I0 using superposition.
5.5 In the network in Fig. P5.5, find I0 using superposition.
5.28 Use Thevenin's theorem to find V0 in the network in Fig. P5.28.
5.45 Given the linear circuit in Fig. P5.45,
it is known that when a 2-k! load is
connected to the terminals A - B , the
load current is 10 mA. If a 10-k! load
is connected to the terminals, the load
current is 6 mA. Find the current in a
20-k! load.
5.51 Use Norton's theorem to find V0 in the network in Fig. P5.51.
5.51 Use Norton's theorem to find V0 in the network in Fig. P5.51.
5.17 Use superposition to find I0 in the network in Fig. P5.17.
5.17 Use superposition to find I0 in the network in Fig. P5.17.
5.46 If an 8-k! load is connected to
the terminals of the network in
Fig. P5.46, VAB = 16 V. If a 2-k!
load is connected to the terminals,
VAB = 8 V. Find VAB if a 20-k!
load is connected to the terminals.
E5.4 Find V0 in the circuit in Fig. E5.2 using both Thévenin's and
Norton's theorems. When deriving the Norton equivalent circuit,
break the network to the left of the 2-k! resistor. Why?

3k"! 4k"!

12V! +
2k"!
2mA!
V0
-

You might also like