Product Information Crawler Excavator

R 930

Generation
8
Engine
180 kW / 245 HP
Non-regulated only for select markets
Operating Weight
30,400 – 31,450 kg
Bucket Capacity
1.00 – 2.15 m³
Experience the Progress
R 930

Safety
• Panoramic visibility with no obstruc-
tions and camera on the rear
and the right side for enhanced
safety
• Tiltable console for easy and
safe access to cab
• Emergency exit via the rear cab
window
• Right window and windshield in
laminated and tinted glass

Equipment
• Large choice of sticks
• Longer lifespan of components
thanks to a grouping of the
lubrication points
• Safety check valves for hoist and
stick cylinders (option)

Maintenance
• Innovative servicing concept,
with service points accessible
from ground level
• Engine oil, hydraulic oil, fuel and
urea (diesel exhaust fluid) levels
visible on the display

2 R 930 Litronic
Comfort
• Spacious, air-conditioned work
space
• Mechanical seat with vertical
suspension as standard
• Easy-to-use high resolution
7" colour touchscreen
• Completely retractable front cab
window
• New LED lighting as standard

Engine
• New Liebherr engine without EGR
valve, diesel oxidation catalyst and
diesel particulate filter
• Automatic engine idling / speed
increase, controlled via joystick
sensors

Undercarriage
• Robust, reliable X-frame undercar-
riage, easy to secure thanks to its
integrated eyelets
• Easy maintenance
• Maintenance-free track chains and
track rollers with lifetime lubrication

R 930 Litronic 3
Technical Data
Engine Hydraulic System
Rating per ISO 9249 180 kW (245 HP) at 1,800 RPM Hydraulic system Positive Control hydraulic system. Demand-
Torque 1,255 Nm at 1,350 RPM based, double independent pump flows
Model Liebherr D934 A7-20 Features high system dynamics and sensitivity
Type 4 cylinder in-line provided by integrated system controlling
Bore 122 mm Independent circuit for rotation
Stroke 150 mm Hydraulic pumps
Displacement 7.0 l For equipment Liebherr, variable displacement, swashplate
Engine operation 4-stroke diesel and travel drive double pump
Common-Rail Max. flow 2 x 265 l/min.
Turbo-charged and after-cooler Max. pressure 380 bar
Exhaust gas treatment Engine non-regulated: without EGR For swing drive Swashplate pump, closed-loop circuit
Cooling system Water-cooled and oil cooler, after-cooled and Max. flow 200 l/min.
fuel cooled Max. pressure 400 bar
Air cleaner Dry-type air cleaner with pre-cleaner Pump management Electronic management synchronous to the
Fuel tank 620 l control block
Electrical system Hydraulic tank 239 l
Voltage 24 V Hydraulic system max. 475 l
Batteries 2 x 135 Ah / 12 V Hydraulic oil filter 1 main return filter with integrated partial micro
Alternator Three-phase current 24 V / 140 A filtration (10 µm)
Engine idling Sensor controlled Cooling system Compact cooler, consisting of a water cooler,
with hydraulic oil cooler, gearbox oil cooler, fuel
cooler and after-cooler cores and hydrostatically
driven fan
MODE selection Adjustment of engine and hydraulic performance
via a mode pre-selector to match application,
Hydraulic Controls e.g. for especially economical and environmen-
Power distribution Via control valves, simultaneous and inde­ tally friendly operation or for maximum digging
pendent actuation of undercarriage, swing drive performance and heavy-duty jobs
and equipment Engine speed and Stepless adjustment of engine output and
Electric servo circuit Electro-hydraulic control performance setting hydraulic power via engine speed
Equipment and swing Proportional via joystick levers
Travel – Proportional control via foot pedals or
­removable levers
– Automatic or manual speed adjustment
Additional functions Proportional regulation via foot pedals or mini-­
joystick Swing Drive
Drive Liebherr swashplate motor with integrated
brake valve and torque control
Transmission Liebherr compact planetary reduction gears
Swing ring Liebherr, sealed race ball bearing swing ring,
internal teeth
Swing speed 0 – 10.1 RPM stepless
Swing torque 99 kNm
Holding brake Wet multi-disc (spring applied, pressure
released)

4 R 930 Litronic
 Operator’s Cab Undercarriage
Cab ROPS safety cab structure optional (roll-over pro- LC Gauge 2,590 mm
tection system according to ISO 12117-2:2008) Drive Liebherr swashplate motor with brake valves on
with windscreen, totally or partially retractable both sides
(only upper part), under cab roof, LED work Transmission Liebherr planetary reduction gear
headlights integrated in the ceiling, a door with Maximum travel speed Low range 3.5 km/h
a sliding window (can be opened on both sides), High range 5.8 km/h
large storing box and several stowing possibili- Drawbar pull on crawler 261 kN
ties, shock-absorbing suspension, laminated Track components D7, D7G, maintenance-free
right hand side and roof windows, all windows Track rollers /  9 / 2
tinted, separate extensible window shades for Carrier rollers
the sunroof window and windscreen, cigarette Tracks Sealed and greased
lighter and 24 V plug, cup holder, mobile phone Track pads Triple grouser
storage net Holding brake Wet multi-disc (spring applied, pressure
Operator’s seat Liebherr-Comfort seat, airsprung with automatic released)
weight adjustment, vertical and longitudinal seat Brake valves Integrated into travel motor
damping including consoles and joysticks. Seat Lashing eyes Integrated
and armrests adjustable separately and in com-
bination (adjustable in width, height and inclina-
tion), seat heating as standard
Arm consoles Oscillating consoles with seat, tiltable console
left
Operation and displays Large high-resolution operating unit, intuitive, Equipment
colour display with touchscreen, video-com­ Type Combination of resistant steel plates and cast
patible, numerous setting, control and monitor- steel components
ing options, e.g. air conditioning control, fuel Hydraulic cylinders Liebherr cylinders with seal and guidance
consumption, machine and attachment para­ ­systems
meters Bearings Sealed, low maintenance
Air-conditioning Automatic air-conditioning, recirculated air func- Lubrication Liebherr central lubrication system
tion, fast de-icing and demisting at the press of Hydraulic connections Pipes and hoses equipped with SAE split-flange
a button, air vents can be operated via a menu. connections
Recirculated air and fresh air filters can be easily Buckets Standard equipped with Liebherr tooth system
replaced and are accessible from the outside.
Heating-cooling unit, designed for extreme out-
side temperatures, sensors for solar radiation,
inside and outside temperatures
Noise emission
ISO 6396 L pA (inside cab) =  80 dB(A)
2000/14/EC LWA (surround noise) = 106 dB(A)

R 930 Litronic5
Dimensions
E A

T B
B1 C

D J
I
R0561
G L
H K
U M
V N

R F

R0560

6 R 930 Litronic
 LCmm
A Uppercarriage width 2,990**
B Uppercarriage height 2,910
B1 Uppercarriage height (handrails folded) 3,130
C Cab height 3,150
D Counterweight ground clearance 1,175
E Rear-end length 3,075
F Tail swing radius 3,200
G Wheelbase 3,990
H Undercarriage length 4,840
I Undercarriage ground clearance 505
J Track height 1,055
K Track gauge 2,590
L Track pad width 600   700   800   900
M Width over tracks 3,190 3,290 3,390 3,490
N Width over steps 3,190 3,190 3,390* 3,390*
* width with removable steps
** without door stop device and spacer

Stick Mono boom 6.20 m

length direct mounting
m mm
R Front swing radius 2.50  3,700
2.80  3,700
3.20  3,700
3.70  3,700
S Height with boom up  8,700
T Boom height 2.50  3,250
2.80  3,550
3.20  3,400
3.70  3,200*
U Length on ground 2.50  6,400
2.80  6,250
3.20  5,600
3.70  4,850*
V Overall length 2.50 10,400
2.80 10,400
3.20 10,400
3.70 10,400*
Bucket 1.75 m3
* without bucket

Transport Dimensions
removable elements disassembled

Stick Mono boom 6.20 m

m mm
Pad width   600   700   800   900
Transport width 3,190 3,290 3,390 3,490
Transport length 2.50 10,400
2.80 10,400
3.20 10,400
3.70 10,400*
Transport height 2.50  3,250
2.80   3,550
3.20  3,400
3.70  3,200*
Bucket 1.75 m3
* without bucket

R 930 Litronic7
Backhoe Bucket
with Mono Boom 6.20 m and Counterweight 5.1 t

ft m
35 R0559 Digging Envelope
10 without quick coupler 1 2 3 4
30 Stick length m 2.50 2.80 3.20 3.70
A Max. reach at ground level m 9.95 10.23 10.60 11.04
8 B Max. digging depth m 6.64 6.94 7.34 7.84
25
C Min. dumping height m 3.39 3.09 2.69 2.19
D Max. dumping height m 6.99 7.13 7.31 7.47
20 6 E Max. cutting height m 10.10 10.23 10.42 10.56
E
15
D 4
Forces
10
without quick coupler 1 2 3 4
2 Stick digging force (ISO 6015)kN 168 156 142 128
5
C Bucket digging force (ISO 6015)kN 204 204 204 204
Stick digging force (SAE J1179)kN 160 149 136 123
0 0 Bucket digging force (SAE J1179)kN 178 178 178 178

-5
-2
Operating Weight and Ground Pressure
-10
B -4 The operating weight includes the basic machine with counterweight 5.1 t, mono boom 6.20 m,
-15 stick 3.20 m and bucket 1.75 m3 (1,160 kg).
Undercarriage LC
-20 -6 Pad width mm 600 700 800 900
1
2 Weightkg 30,400 30,750 31,100 31,450
3 4 Ground pressure kg/cm2 0.59 0.51 0.45 0.41
-25
-8 Optional: counterweight 6.2 t
-30 (counterweight 6.2 t increases the operating weight by 1,100 kg and ground pressure by 0.02 kg/m2)
12 10 8 6 4 2 0m see load tables on page 11

40 35 30 25 20 15 10 5 0 ft
A

8 R 930 Litronic
 Buckets Machine stability per ISO 10567* (75 % of tipping capacity)
LC-Undercarriage
Cutting width

(with track pads 600 mm)

Capacity
ISO 7451

Weight 3)

Weight4)

Stick length (m)

without quick coupler with quick coupler
mm m3 kg kg 2.50 2.80 3.20 3.70 2.50 2.80 3.20 3.70
with counterweight 5.1 t
1,050 1.00   870   930 v v v v v v v v
1,250 1.25 1,000 1,050 v v v v v v v v
1,400 1.45 1,070 1,130 v v v v v v v y
1,550 1.60 1,110 1,170 v v v y v v y v
STD1)

1,650 1.75 1,160 1,220 v v y v v y v y

1,550 1.85 1,170 1,230 v y v y y y v V
1,650 2.00 1,210 1,270 y v y V y v y V
1,750 2.15 1,260 1,320 v y V V v y V V
1,050 1.00 1,000 1,050 v v v v v v v v
1,250 1.25 1,140 1,200 v v v v v v v v
1,400 1.45 1,230 1,290 v v v v v v v y
1,550 1.60 1,290 1,350 v v y v v v y y
HD2)

1,650 1.75 1,350 1,410 v y v y v y v V

1,550 1.85 1,340 1,400 v y v y y v y V
1,650 2.00 1,400 1,460 y v y V v y V V
1,750 2.15 1,450 1,510 v y V V y V V –
with counterweight 6.2 t
1,050 1.00   870   930 v v v v v v v v
1,250 1.25 1,000 1,050 v v v v v v v v
1,400 1.45 1,070 1,130 v v v v v v v v
1,550 1.60 1,110 1,170 v v v v v v v v
STD1)

1,650 1.75 1,160 1,220 v v v y v v v y

1,550 1.85 1,170 1,230 v v v y v v y v
1,650 2.00 1,210 1,270 v v y v v y v y
1,750 2.15 1,260 1,320 v y v y y v y V
1,050 1.00 1,000 1,050 v v v v v v v v
1,250 1.25 1,140 1,200 v v v v v v v v
1,400 1.45 1,230 1,290 v v v v v v v v
1,550 1.60 1,290 1,350 v v v v v v v y
HD2)

1,650 1.75 1,350 1,410 v v v y v v y v

1,550 1.85 1,340 1,400 v v y v v v y v
1,650 2.00 1,400 1,460 v y v y v y v y
1,750 2.15 1,450 1,510 y y v V y v y V
* Indicated loads are based on ISO 10567, at maximum reach, and may be swung 360° on firm and even ground
1) Standard bucket with teeth Z 50
2) HD bucket with teeth Z 50
3) Bucket for direct mounting
4) Bucket for mounting to quick coupler

Other buckets available upon request

Max. material weight v = ≤ 2.0 t/m3, y = ≤ 1.8 t/m3, v = ≤ 1.65 t/m3, y = ≤ 1.5 t/m3, V = ≤ 1.2 t/m3, – = not authorised

R 930 Litronic9
Lift Capacities
with Mono Boom 6.20 m, Counterweight 5.1 t and Track Pads 600 mm

Stick 2.50 m Stick 2.80 m

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m
carriage

carriage
Under-

Under-
m m m m
9.0 9.0
7.5 8.0 9.0* 7.1 8.3* 6.4 7.5 8.1 8.5* 6.6 7.3* 6.8
6.0 7.9 9.3* 5.6 8.1* 7.5 6.0 7.9 8.9* 5.5 8.2* 5.2 7.1* 7.8
4.5 11.6 12.8* 7.5 10.2* 5.4 8.1 4.8 7.2 8.1 4.5 18.5* 18.5* 11.7 12.2* 7.6 9.8* 5.4 8.1 4.5 6.8 8.4
3.0 10.7 15.3* 7.1 11.2 5.2 7.9 4.4 6.7 8.4 3.0 10.8 14.7* 7.2 11.0* 5.2 7.9 4.2 6.4 8.6
1.5 8.4 1.5 8.7
LC

LC
10.1 16.5* 6.8 10.8 5.0 7.7 4.3 6.6 10.1 16.2* 6.8 10.8 5.0 7.7 4.1 6.2
0 10.0 16.2* 6.6 10.6 4.9 7.6 4.4 6.8 8.2 0 9.9 16.3* 6.6 10.6 4.9 7.6 4.2 6.4 8.4
– 1.5 13.0* 13.0* 10.0 15.0* 6.6 10.6 4.9 7.6 4.9 7.5 7.6 – 1.5 12.5* 12.5* 9.9 15.3* 6.5 10.5 4.9 7.6 4.6 7.0 7.9
– 3.0 15.9* 15.9* 10.2 12.8* 6.7 9.9* 5.9 8.5* 6.7 – 3.0 17.1* 17.1* 10.0 13.4* 6.6 10.3* 5.4 8.3* 7.0
– 4.5 8.7* 8.7* 7.4* 7.4* 5.2 – 4.5 12.1* 12.1* 9.7* 9.7* 7.6* 7.6* 5.6
– 6.0 – 6.0

Stick 3.20 m Stick 3.70 m

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m
carriage

carriage
Under-

m m Under- m m
9.0 6.9* 6.9* 5.8 9.0 5.7* 5.7* 6.5
7.5 5.9 6.3* 7.2 7.5 5.7 6.0* 5.3* 5.3* 7.8
6.0 8.0 8.4* 5.6 7.8* 4.8 6.1* 8.2 6.0 5.6 7.3* 4.4 5.1* 8.6
4.5 11.4* 11.4* 7.6 9.3* 5.4 8.2 4.2 6.2* 8.7 4.5 7.7 8.7* 5.5 7.8* 4.0 5.9* 3.9 5.2* 9.2
3.0 11.0 14.0* 7.2 10.5* 5.2 7.9 3.9 6.0 3.9 6.0 9.0 3.0 11.4* 11.4* 11.2 13.1* 7.3 10.0* 5.2 8.0 3.9 6.0 3.6 5.4* 9.4
1.5 9.0 1.5 9.5
LC

LC

10.2 15.8* 6.8 10.8 5.0 7.7 3.8 5.9 3.8 5.8 10.3 15.3* 6.8 10.9 5.0 7.7 3.8 5.8 3.5 5.4
0 6.5* 6.5* 9.8 16.3* 6.6 10.5 4.8 7.5 3.9 6.0 8.8 0 7.6* 7.6* 9.9 16.2* 6.5 10.5 4.8 7.5 3.7 5.8 3.6 5.5 9.2
– 1.5 12.0* 12.0* 9.8 15.7* 6.5 10.4 4.8 7.5 4.2 6.5 8.3 – 1.5 11.6* 11.6* 9.7 15.9* 6.4 10.3 4.7 7.4 3.8 5.9 8.8
– 3.0 18.6* 18.6* 9.9 14.0* 6.5 10.5 4.9 7.6 7.5 – 3.0 17.0* 17.0* 9.7 14.6* 6.4 10.3 4.7 7.4 4.4 6.8 8.0
– 4.5 14.0* 14.0* 10.2 10.9* 6.7 8.0* 6.5 7.6* 6.2 – 4.5 16.1* 16.1* 10.0 12.1* 6.5 9.1* 5.6 7.6* 6.8
– 6.0 – 6.0 7.1* 7.1* 6.5* 6.5* 4.9

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The load values are quoted in tons (t) at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position.
Capacities are valid for 600 mm wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket c­ ylinder,
link and lever the lift capacities will increase by 410 kg. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.
According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders
and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories.

10 R 930 Litronic
Lift Capacities
with Mono Boom 6.20 m, Counterweight 6.2 t and Track Pads 600 mm

Stick 2.50 m Stick 2.80 m

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m
carriage

carriage
Under-

Under-
m m m m
9.0 9.0
7.5 8.8 9.0* 7.8 8.3* 6.4 7.5 8.5* 8.5* 7.2 7.3* 6.8
6.0 8.6 9.3* 6.1 8.1* 7.5 6.0 8.7 8.9* 6.1 8.2* 5.8 7.1* 7.8
4.5 12.7 12.8* 8.3 10.2* 6.0 8.8* 5.3 7.9 8.1 4.5 18.5* 18.5* 12.2* 12.2* 8.3 9.8* 6.0 8.6* 5.0 7.2* 8.4
3.0 11.8 15.3* 7.9 11.2* 5.8 8.6 4.9 7.3 8.4 3.0 11.9 14.7* 7.9 11.0* 5.8 8.6 4.7 7.0 8.6
1.5 8.4 1.5 8.7
LC

LC
11.2 16.5* 7.6 11.8 5.6 8.5 4.8 7.2 11.3 16.2* 7.6 11.8 5.6 8.4 4.6 6.8
0 11.1 16.2* 7.4 11.6 5.5 8.3 4.9 7.4 8.2 0 11.0 16.3* 7.3 11.5 5.5 8.3 4.7 7.0 8.4
– 1.5 13.0* 13.0* 11.1 15.0* 7.4 11.5 5.5 8.3 5.4 8.2 7.6 – 1.5 12.5* 12.5* 11.0 15.3* 7.3 11.5 5.4 8.3 5.1 7.7 7.9
– 3.0 15.9* 15.9* 11.3 12.8* 7.5 9.9* 6.5 8.5* 6.7 – 3.0 17.1* 17.1* 11.1 13.4* 7.4 10.3* 6.0 8.3* 7.0
– 4.5 8.7* 8.7* 7.4* 7.4* 5.2 – 4.5 12.1* 12.1* 9.7* 9.7* 7.6* 7.6* 5.6
– 6.0 – 6.0

Stick 3.20 m Stick 3.70 m

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m
carriage

carriage
Under-

m m Under- m m
9.0 6.9* 6.9* 5.8 9.0 5.7* 5.7* 6.5
7.5 6.3* 6.3* 7.2 7.5 6.0* 6.0* 5.3* 5.3* 7.8
6.0 8.4* 8.4* 6.1 7.8* 5.3 6.1* 8.2 6.0 6.2 7.3* 4.9 5.1* 8.6
4.5 11.4* 11.4* 8.4 9.3* 6.0 8.2* 4.7 6.2* 8.7 4.5 8.5 8.7* 6.0 7.8* 4.5 5.9* 4.3 5.2* 9.2
3.0 12.1 14.0* 7.9 10.5* 5.8 8.6 4.4 6.5* 4.4 6.4* 9.0 3.0 11.4* 11.4* 12.3 13.1* 8.0 10.0* 5.8 8.4* 4.4 6.5 4.1 5.4* 9.4
1.5 9.0 1.5 9.5
LC

LC

11.3 15.8* 7.6 11.6* 5.6 8.4 4.3 6.4 4.3 6.4 11.4 15.3* 7.6 11.2* 5.5 8.4 4.3 6.4 4.0 5.8*
0 6.5* 6.5* 11.0 16.3* 7.3 11.5 5.4 8.2 4.4 6.6 8.8 0 7.6* 7.6* 11.0 16.2* 7.3 11.5 5.4 8.2 4.2 6.3 4.0 6.1 9.2
– 1.5 12.0* 12.0* 10.9 15.7* 7.2 11.4 5.3 8.2 4.7 7.1 8.3 – 1.5 11.6* 11.6* 10.8 15.9* 7.1 11.3 5.3 8.1 4.3 6.5 8.8
– 3.0 18.6* 18.6* 11.0 14.0* 7.3 10.7* 5.5 8.0* 7.5 – 3.0 17.0* 17.0* 10.8 14.6* 7.1 11.1* 5.3 8.1 4.9 7.5 8.0
– 4.5 14.0* 14.0* 10.9* 10.9* 7.5 8.0* 7.2 7.6* 6.2 – 4.5 16.1* 16.1* 11.1 12.1* 7.3 9.1* 6.2 7.6* 6.8
– 6.0 – 6.0 7.1* 7.1* 6.5* 6.5* 4.9

Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The load values are quoted in tons (t) at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position.
Capacities are valid for 600 mm wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket c­ ylinder,
link and lever the lift capacities will increase by 410 kg. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.
According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders
and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories.

R 930 Litronic11
Available Attachments

Rigid Ditch Cleaning Bucket

GRL 100, for mounting to quick coupler SWA 66
Cutting width mm 2,000 2,400 2,400
Capacitym3 0.70 0.85 1.25
R0338
Weightkg 546 635 685

Tiltable Ditch Cleaning Bucket

GRL 100, 2 x 50° tiltable, for direct mounting
Cutting width mm 2,000 2,000 2,200 2,400 2,400
Capacitym3 1.20 1.45 1.65 0.85 1.45
R0337 Weightkg 1,520 1,600 1,680 1,475 1,620
GRL 100, 2 x 50° tiltable, for mounting to quick coupler SWA 66
Cutting width mm 2,000 2,000 2,200 2,400 2,400
Capacitym3 1.20 1.45 1.65 0.85 1.45
Weightkg 1,520 1,600 1,680 1,475 1,620

Tilt Bucket
SL 100, 2 x 50° tiltable, for mounting to quick coupler SWA 66
Cutting width mm 1,600 1,600 1,700 1,800
Capacitym3 1.45 1.75 1.85 1.60
R0339
Weightkg 1,520 1,635 1,695 1,620
HD-version X

H1308

Clamshells
GM 20C, earthmoving shell, for mounting to quick coupler SWA 48
Cutting width mm 600 800 1,000 1,200
Capacitym3 0.45 0.60 0.75 0.90
Weightkg 1,080 1,130 1,205 1,270
GMZ 80, earthmoving shell, for mounting to quick coupler SWA 66
Cutting width mm 1,200 1,400
Capacitym3 1.40 1.60
Weightkg 2,376 2,486

H1138

Sorting Grab perforated ribbed closed stone tong

SG 30, for direct mounting
Cutting width mm 1,000 1,200 1,400 1,000 1,200 1,400 1,000 1,200 1,400 1,020
Capacitym3 0.85 1.00 1.15 0.75 0.90 1.05 0.85 1.00 1.15 0.85
Weightkg 1,700 1,570 1,850 1,775 1,885 1,990 1,730 1,810 1,890 1,765
SG 30, for mounting to quick coupler SWA 48
Cutting width mm 1,000 1,200 1,400 1,000 1,200 1,400 1,000 1,200 1,400 1,020
Capacitym3 0.85 1.00 1.15 0.75 0.90 1.05 0.85 1.00 1.15 0.85
Weightkg 1,700 1,570 1,850 1,775 1,885 1,990 1,730 1,810 1,890 1,765
SG 40, for mounting to quick coupler SWA 48 and SWA 66
Cutting width mm 1,100 1,300 1,100 1,300
Capacitym3 1.30 1.60 1.10 1.40
Weightkg 2,230 2,800 2,320 2,900

12 R 930 Litronic
Serial Equipment

Undercarriage Operator’s Cab

Lashing eyes 2" seat belt with retractor
Sprocket with dirt ejector 7" multifunction colour touchscreen
Track and carrier rollers, sealed and lifetime-lubricated Air conditioning, automatic, tri-zone, controlled via display
Tracks, sealed and greased Armrests adjustable in width, height and inclination
Bottle holder
Cab air filters housing, accessible from ground level
Cab door sliding windows
Cigarette lighter
Coat hook
Uppercarriage Electric socket in cabin (24 V)
Access platforms without protruding parts Emergency hammer
Anti-skid surfaces Engine oil level on touchscreen
Automatic swing brake lock Footrest
Engine coolant level, visible from the cab Fuel consumption on touchscreen
Engine hood with gas spring opening Fuel level on touchscreen
Filters accessible from ground level Hydraulic oil level on touchscreen
Handrails Interior lighting
Hydraulic oil level, visible from ground level Laminated right hand side window
Lockable service doors Laminated roof window
Lockable storage and accessories compartment LiDAT Plus (Liebherr data transfer system) *
Main switch, electric, with timer Mechanical hour meters, visible from ground level
Main switch, manual, lockable Mobile phone storage net
Protection grid on radiator fan Movement priority between swing and boom, adjustable via touchscreen
Sound insulation Movement priority for stick-in, adjustable via touchscreen
Swing drive gearbox oil level, visible from the cab Rain hood over front window opening
Swing-out radiators Rearview mirror
Tool set including storage case Rear window emergency exit
Windshield washer fluid tank, accessible from ground level Retractable laminated two-piece windscreen
Roll-down sun blinds for windscreen and roof window
Rubber floor mat, fixed on floor and removable
Shortkey button on joystick configurable
Storage nets
Storage spaces
Hydraulic System Swing braking torque adjustable via touchscreen
Dedicated swing circuit Tiltable console left
Filter with integrated fine filters Tinted windows
Hydraulic pressure measuring ports Visco-elastic damping
Liebherr Positive Control system with 2 independent circuits Windscreen wiper and washer
Magnetic rod Work mode selector
Pressure accumulator for controlled lowering of equipment with engine turned off

Equipment
Engine Anti-drift system boom cylinders
Air filter with automatic dust ejector Anti-drift system stick cylinder
Automatic engine idling / speed increase, controlled via joystick sensors Boom cylinders regeneration
Common-Rail injection system Pivot points made of cast steel
Fixed geometry turbocharger SAE split flanges on high pressure lines
Fuel fine filter Stick cylinder regeneration
Fuel pre-filter and water separator
Fuel priming pump
Intercooler
Power Pack non-regulated countries (for select markets)
Stepless adjustable engine speed

* optionally extendable after one year

R 930 Litronic13
Equipment Standard / Option

Undercarriage Operator’s Cab

Chain guide 1 piece • Acoustic travel alarm deactivatable +
Chain guide 2 pieces + Auxilary heater programmable +
Chain guide 3 pieces + Dark tinted windows +
Cover and base plate for undercarriage centre section • Electric socket in cabin (12 V) +
Reinforced cover and base plate for undercarriage centre section + Emergency stop in cab +
Steps • FGPS front guard +
Steps wide + FGPS front guard tiltable +
Track pads triple grouser 600 mm • Filter for hydraulic hammer return flow +
Track pads triple grouser 700 / 800 / 900 mm + FOPS top guard +
Undercarriage LC • Handrests elevated for joysticks +
Headlights on cab, front, LED, 2 pieces •1)
Headlights on cab, front, LED+, 2 pieces +1)
High pressure circuit with Tool Control (20 attachment adjustments on display) +
Luminosity control (LED+ headlights) +1)
Medium pressure circuit +
Uppercarriage Mini-joysticks proportional +
Air pre-filter with cyclonical dust trap + Operator seat Comfort +
Air pre-filter with oil bath dust trap + Operator seat Standard •
Centralised lubrication system (automatic) + Overload warning system +
Centralised lubrication system (manual) • Radio Comfort +
Counterweight heavy 6,2 t + Radio pre-installation •
Counterweight standard 5.1 t • Rear view monitoring camera •
Front right rearview mirrors + Right hand side view monitoring camera •
Fuel anti-theft protection + Roof window protection grid +
Headlight on uppercarriage, front right, LED, 1 piece, protection included +1) ROPS safety cab structure (ISO 12117-2) +
Headlight on uppercarriage, front right, LED+, 1 piece, protection included +1) Rotating beacon on cabin, LED, 1 piece +
Headlight on uppercarriage, lateral left, LED+, 1 piece +1) Sun visor +
Headlight on uppercarriage, lateral right, LED+, 1 piece +1) Windscreen bottom protection grid +
Headlights on uppercarriage, rear, LED+, 2 pieces +1)
Lockable fuel tank cap •
Lockable fuel tank cap with padlock +
Lockable storage box +
Pre-heating system for fuel +
Rearview mirror on counterweight + Equipment
Safe uppercarriage side access platform + Floating boom +
Tank refilling pump fuel + Headlight on boom, right, LED, 1 piece •1)
Headlight on boom, right, LED+, 1 piece +1)
Mono boom 6.20 m •
Pipe fracture safety valve for stick cylinder +
Pipe fracture safety valves for boom cylinders +
Quick coupler SWA 66 hydraulic +
Hydraulic System Quick coupler SWA 66 mechanical +
Liebherr hydraulic oil • Stick 2.50 m +
Liebherr hydraulic oil, adapted for extreme climate conditions + Stick 2.80 m +
Liebherr hydraulic oil, biodegradable + Stick 3.20 m +
Stick 3.70 m +
Stick bottom protection +

•  = Standard, + = Option
1) Equipment not individually available, but only as predefined lighting packages

Non-exhaustive list, please contact us for further information.

Options and / or special equipments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty.

14 R 930 Litronic
Notes

R 930 Litronic15
The Liebherr Group of Companies

All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.
Wide Product Range State-of-the-art Technology
The Liebherr Group is one of the largest construction To provide consistent, top quality products, Liebherr attaches
equipment manufacturers in the world. Liebherr’s high- great importance to each product area, its components and
value products and services enjoy a high reputation in many core technologies. Important modules and components are
other fields. The wide range includes domestic appliances, developed and manufactured in-house, for instance the entire
aerospace and transportation systems, machine tools and drive and control technology for construction equipment.
maritime cranes.
Worldwide and Independent
Exceptional Customer Benefit Hans Liebherr founded the Liebherr family company in 1949.
Every product line provides a complete range of models in Since then, the family business has steadily grown to a group of
many different versions. With both their technical excellence more than 130 companies with more than 46,000 employees
and acknowledged quality, Liebherr products offer a maxi- located on all continents.  The corporate headquarters of
mum of customer benefits in practical applications. the Group is Liebherr-International AG in Bulle, Switzerland.
The Liebherr family is the sole owner of the company.

www.liebherr.com

RG-BK LFR/SP-12247297-web-10.19_enGB

Liebherr-France SAS
2 avenue Joseph Rey, B.P. 90287, FR-68005 Colmar Cedex
S +33 389 21 30 30, Fax +33 389 21 37 93
www.liebherr.com, E-Mail: [email protected]
www.facebook.com/LiebherrConstruction