100% found this document useful (3 votes)
265 views2 pages

Topography Survey

This Job Safety Analysis identifies the tasks, hazards, and controls for a topography survey job. The tasks include work preparation, the topographic survey, hammering pickets into the ground, and potential adverse weather conditions like extreme heat. Hazards include manual handling, trips and falls, uneven ground, back pain, insects and snakes, heat stress, and fatigue. Controls include following procedures, using proper lifting techniques, planning breaks, having first aid available, wearing protective equipment, and good communication. Upon completion, all areas must be cleaned and hazards removed.

Uploaded by

AMIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
100% found this document useful (3 votes)
265 views2 pages

Topography Survey

This Job Safety Analysis identifies the tasks, hazards, and controls for a topography survey job. The tasks include work preparation, the topographic survey, hammering pickets into the ground, and potential adverse weather conditions like extreme heat. Hazards include manual handling, trips and falls, uneven ground, back pain, insects and snakes, heat stress, and fatigue. Controls include following procedures, using proper lifting techniques, planning breaks, having first aid available, wearing protective equipment, and good communication. Upon completion, all areas must be cleaned and hazards removed.

Uploaded by

AMIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

JOB SAFETY ANALYSIS

Facility / Site: TATAOUINE Location within Site: TATAOUINE Permit No:PTF-19- Permit Type: FROID Date:22/11/19

Task Description: TOPOGRAPHY


REQUIRED REFERENCES JSA REVIEW
Have the relevant Procedures, Standards, Guidelines, or Safe
Yes N/A
Work Practices been reviewed? Pending confirmation by the Task Leader of site conditions, I agree that the attached JSA identifies the
significant Task Steps, Hazards, and Controls.

JSA REVIEWER (Supervisor or Designate):


RISK ASSESSMENT
Must existing Procedures or Work Practices be modified to
Yes No Name / Signature : Company:
perform this work?
After mitigation, are there any hazards that continue to present WORK SITE VERIFICATION
a potentially significant risk? (Scenario-Based Risk Assessment Yes No
required)
The Work Team has assessed the worksite conditions and confirms:
 The JSA addresses the applicable hazards and necessary controls.
PPE REQUIRED DURING THIS TASK
 The Team has the appropriate resources (people and equipment) to do the job safely.
HARD HAT SAFETY GLASSES
 Others that could be affected by the work have been informed.
FACE SHIELD TASK LEADER:
SAFETY SHOES / BOOTS
GOGGLES

Name / Signature: Company:


FALL PROTECTION
FALL RESTRAINT
COMPLETE THE SECTION BELOW IF THIS JSA IS NOT PART OF A PERMIT PACK
GLOVES:
COTTON Work Team Declaration:
LEATHER I acknowledge that I have reviewed the attached JSA, I understand my roles
IMPACT PROTECTION and responsibilities, and I will comply with the instructions for this task.
Name (print): Name (print):
Dust mask OTHER (specify):
Work clothes

OTHER PPE (specify): High-Vis Jacket


TASK STEPS POTENTIAL HAZARDS HAZARDS CONTROLS HAZARD PORT
(Number) (What could go wrong?) (How can harm be prevented?) MITIGATION STATES
Manual handling PTW /JSA/TBT
Heavy load Manual handling techniques Eni ERP
Work preparation
Trips and falls Good communication
poor knowledge about the site
Heat stress PTW /JSA/TBT Eni ERP
Topographic survey Planned break
Poor communication First aider in the site
Trips and falls Ensure good communication First aid kit available
Uneven ground Be aware of piles holes
PTW /JSA/TBT Eni ERP
Back pain
Hammering the pickets and the nail Pre use check First aider in the site
Trips on the hammered pickets Identify the pickets using barricade tape
on the ground First aid kit available
Engines may hit the pickets
• Bites Job rotation to be applied and share outdoors
• Poisonous insects activities between all workers
• Slip, trips and fall Big and fresh quantity of water to be displayed
• Dehydration Manual technique Eni ERP
Adverse weather condition: • Heat struck Awareness session to workers to aware them First aider in the site
Scorpions and snakes • Dizziness about hazards associated with poisonous insects First aid kit available
• MSD First aid kit and first aider should be available
• Fatigue Frequent breaks to be taken for recovery
• Working in extreme temperature
Workers should wear adequate coverall
Time management culture among work force

Eni ERP
Slips, Trips Good Housekeeping and keep all area free from First aider in the site
1. End Job and Housekeeping
Back injury hazard First aid kit available

Position Date Signed


Prepared By
Checked By AMINE RAOUANE Area HSSE Supervisor 22/11/19
Approved By

You might also like