The document outlines requirements for installing a CCTV system including ensuring no obstructions to cameras, proper cable containment and labeling, surge protection of the CCTV rack, and specialist installation of the system.
The document outlines requirements for installing a CCTV system including ensuring no obstructions to cameras, proper cable containment and labeling, surge protection of the CCTV rack, and specialist installation of the system.
1. CCTV system ITP and check list to be provided for review and approval DOCUMENT / DRAWINGS 2. Installation to be by specialist of CCTV system. REVIEW STAMP 3. The following points shall be considered during the Installation of CCTV system: · Ensure that there are no other service devices in front of the camera. A Accepted · Ensure that a cut out provided to fix the camera and no services obstruction above the cutting. · Ensure that the incoming CAT6A cable is available along with proper containment and cable tag. B Accepted as noted · Check the cable dressing done inside the rack properly. · Ensure the CCTV rack is surge protected and properly grounded. Not Approved - Revise/ C · Ensure the Identification Labels are provided as per approved submittal/samples. Resubmit CHECKED BY: Baihram Majeed DATE: 07-05-19 Documents receiving an A or B status are considered to conform with the design intent but does not mean acceptance of dimensions, sizes or weights, nor does it relieve the Subcontractor/Consultant from any responsibility for errors, ommisions and/or compliance with obligations an/or responsibility of the Contract and/or Consultancy agreement.