0% found this document useful (0 votes)
52 views1 page

美规 孟三桥 Pile Length

Uploaded by

汤耀
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
52 views1 page

美规 孟三桥 Pile Length

Uploaded by

汤耀
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Strength Limit State Pile Foundation Parameters Estimate (As per AASHTO 2012)

34.455 ZK1
Computation Parameters Bored Cast-in-Place Pile

Unit End
Stratum δ'v δ'v Su Su Unit Skin Unit End RR (kN)
Stratum Name Thickness of Thickness in Thickness of γ' Pile Diameter Unit Skin Friction Bearing
No. Su/Pa α NC N60 N160 φ′f σ′p β Friction, qs Bearing, qp
Stratum (m) calculation (m) Stratum (ft) kN/m3
(m) (kN) (kN)
kPa ksf kPa ksf
(kPa) (kPa)

1-1 Fill 0.00 0.00 0.00 8.23 0.00 0.00 1.40 5.33 8.35 35.98 5.44 0.53 0.00 0.00

2-1 Low Liquid Limit Clay 6.40 4.88 21.00 7.94 25.40 0.53 29.40 0.61 0.29 0.55 1.40 9.00 16.17 155.94

2-2 Silty Sand 0.00 0.00 0.00 7.55 50.80 1.06 1.40 0.00 0.00 0.00 0.00 0.00
2-3 Silty Sand 20.00 20.00 65.62 9.00 140.80 2.94 1.40 24.67 22.49 39.94 12.02 0.51 71.77 3470.67
2-4 Silty Sand 11.20 6.66 36.75 9.41 283.49 5.92 1.40 44.00 28.32 40.86 14.46 0.25 70.87 2528.08 1140.36 1555.88

3-1 Low Liquid Limit Clay 12.80 0.00 41.99 9.21 395.13 8.26 35.10 0.73 0.35 0.55 1.40 9.00 19.31 0.00

3-2 Silty Sand 4.50 0.00 14.76 8.82 473.93 9.90 1.40 9.00 96.67 46.28 42.82 21.42 0.25 118.48 0.00 293.42
High Liquid Limit
3-3 6.50 0.00 21.33 8.92 522.76 10.92 88.30 1.85 0.87 0.55 1.40 9.00
Clay
3-4 Silt 0.00 0.00 0.00 8.43 551.74 11.53 1.40 0.00 5058.28

3-5 Low Liquid Limit Clay 30.00 0.00 98.43 9.11 688.45 14.39 67.33 1.41 0.66 0.55 1.40 9.00

3-51 Silty Sand 0.00 0.00 0.00 9.00 551.74 11.53 0.00

Extreme Event Limit State Pile Foundation Parameters Estimate (As per AASHTO 2012)
30.000 ZK1
Computation Parameters Bored Cast-in-Place Pile
Unit End
Stratum δ'v δ'v Su Su Unit Skin Unit End RR (kN)
Stratum Name Thickness of Thickness in Thickness of γ' Pile Diameter Unit Skin Friction Bearing
No. Su/Pa α NC N60 N160 φ′f σ′p β Friction, qs Bearing, qp
Stratum (m) calculation (m) Stratum (ft) kN/m3
(m) (kN) (kN)
kPa ksf kPa ksf
(kPa) (kPa)

1-1 Fill 0.00 0.00 0.00 8.23 0.00 0.00 1.60 5.33 8.35 35.98 5.44 0.53 0.00 0.00

2-1 Low Liquid Limit Clay 1.95 0.00 6.38 7.94 7.72 0.16 29.40 0.61 0.29 0.55 1.60 9.00 16.17 0.00

2-2 Silty Sand 0.00 0.00 0.00 7.55 15.44 0.32 1.60 0.00 0.00 0.00 0.00 0.00
2-3 Silty Sand 20.00 20.00 65.62 9.00 105.44 2.20 1.60 24.67 22.49 39.94 12.02 0.65 69.05 6938.14
2-4 Silty Sand 11.20 6.66 36.75 9.41 248.12 5.19 1.60 44.00 28.32 40.86 14.46 0.25 62.03 2073.99

3-1 Low Liquid Limit Clay 12.80 0.00 41.99 9.21 359.77 7.52 35.10 0.73 0.35 0.55 1.60 9.00 19.31 315.90 0.00 634.83

3-2 Silty Sand 4.50 0.00 14.76 8.82 438.57 9.17 1.60 9.00 96.67 46.28 42.82 21.42 0.25 109.64 0.00
High Liquid Limit
3-3 6.50 0.00 21.33 8.92 487.40 10.19 88.30 1.85 0.87 0.55 1.60 9.00 48.57 794.70 0.00
Clay
3-4 Silt 0.00 0.00 0.00 8.43 516.38 10.79 1.60 0.00 0.00 0.00 0.00 7717.57

3-5 Low Liquid Limit Clay 30.00 0.00 98.43 9.11 653.09 13.65 67.33 1.41 0.66 0.55 1.60 9.00

3-51 Silty Sand 0.00 0.00 0.00 9.00 516.38 10.79 0.00

You might also like