0% found this document useful (0 votes)
91 views2 pages

Ku Band Eng

This document provides information about a Ku-Band transmit/receive module. The module amplifies RF signals for transmission and provides small signal gain for received signals. It has WR62 connectors for the transmit output and receive inputs. Key features include operating in the Ku-Band frequency range, using +8.3V and +5.5V supply voltages, and providing switchable RF paths for calibration. The module is intended for use in electronic warfare, radar systems, and test equipment. Specifications include transmit power output, receive gain, noise figure, current draw, operating temperature range, and physical dimensions.

Uploaded by

Gajendra Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
91 views2 pages

Ku Band Eng

This document provides information about a Ku-Band transmit/receive module. The module amplifies RF signals for transmission and provides small signal gain for received signals. It has WR62 connectors for the transmit output and receive inputs. Key features include operating in the Ku-Band frequency range, using +8.3V and +5.5V supply voltages, and providing switchable RF paths for calibration. The module is intended for use in electronic warfare, radar systems, and test equipment. Specifications include transmit power output, receive gain, noise figure, current draw, operating temperature range, and physical dimensions.

Uploaded by

Gajendra Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

KU-BAND

TRANSMIT/RECEIVE
MODULE

www.aselsan.com
REHİS-KU-BAND TRANSMIT/RECEIVE MODULE/E001/ 03-2017
KU-BAND
TRANSMIT/RECEIVE

Specifications are subject to change without any notice. | All tolerances are within ±10%.
MODULE
Description Key Features

The transmit line in Ku-Band power amplifier and recei- • Ku-Band


ve module is responsible for amplifying the RF signal up • +8.3V and +5.5V supply voltages
to the desired level. The receive arms have small signal • SMA compatible thread-in connectors
gain which is typically 16dB. Receive arms also provide • WR62 Rx input and Tx output
protection against high power signals. The module has • PA base temperature monitoring via ADC output
WR62 compatible adapters at Tx output and Rx inputs. • Switchable RF path for calibration of antenna and Rx arms
The remaining connectors are compatible with SMA type. • High Reliability
25-pin female Micro-D connector is used for control/
supply voltages. Applications

• EW/SIGINT
• Radar Systems
• Instrumentation/Test Module

Parameter Min Typ Max Unit


Transmit Input Power (SAT) -1 0 1 dBm
Transmit Saturated Output Power 40 40.8 dBm
Receive Gain 15 16 17 dB
Receive Noise Figure 5.5 dB
Positive Supply Current (8.3V) (at %11 duty cycle) 1.5 1.6 A
Positive Supply Current (5.5V) 44 mA
Operating Temperature -40 75 °C
Physical Dimensions (L x W x H) 130 x 151.1 x 33.6 mm

P: +90 (312) 592 10 00 | F: +90 (312) 354 13 02 | [email protected] ASELSAN A.Ş. is a Turkish Armed Forces Foundation company.

You might also like