0 ratings0% found this document useful (0 votes)
28 views567 pagesBeam and Col Design Results
Uploaded by
Sayan DasCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
28 views567 pagesBeam and Col Design Results
Uploaded by
Sayan DasCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 567
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 380
============================================================================
B E A M N O. 1 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 14.01 -0.20 2 | 37.47 -0.11 12
| 0.00 -36.36 -0.11 12 |
291.7 | 0.00 2.19 -0.02 8 | 36.25 -0.11 12
| 0.00 -25.62 -0.11 12 |
583.3 | 0.00 12.27 -0.45 21 | 33.03 -0.11 12
| 0.00 -6.14 -0.32 16 |
875.0 | 0.00 11.81 -0.45 21 | 28.95 -0.11 12
| 0.00 -7.24 0.20 1 |
1166.7 | 0.00 13.39 -0.58 13 | 23.43 -0.11 12
| 0.00 -4.99 0.20 1 |
1458.3 | 0.00 14.01 -0.58 13 | 16.87 -0.11 12
| 0.00 -2.73 0.20 1 |
1750.0 | 0.00 15.06 -0.43 11 | -11.20 -0.45 21
| 0.00 -0.48 0.20 1 |
2041.7 | 0.00 11.33 -0.50 15 | -15.27 -0.58 13
| 0.00 -1.78 -0.20 2 |
2333.3 | 0.00 13.18 -0.11 12 | -21.83 -0.58 13
| 0.00 -4.03 -0.20 2 |
2625.0 | 0.00 11.24 -0.11 12 | -27.35 -0.58 13
| 0.00 -7.78 -0.45 21 |
2916.7 | 0.00 11.78 0.14 20 | -31.43 -0.58 13
| 0.00 -13.86 -0.45 21 |
3208.3 | 0.00 11.99 0.14 20 | -34.27 -0.58 13
| 0.00 -22.14 -0.58 13 |
3500.0 | 0.00 13.06 0.20 1 | -35.87 -0.58 13
| 0.00 -32.43 -0.58 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 207.49 178.08 178.08 178.08 188.95
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 380 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 381
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 32.93 MX = -0.11 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -30.63 MX = -0.58 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 2 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.37 -0.26 3 | 120.63 5.65 11
| 0.00 -100.49 5.65 11 |
116.7 | 0.00 0.55 -0.85 1 | 118.67 5.65 11
| 0.00 -86.53 5.65 11 |
233.3 | 0.00 0.45 -0.85 1 | 116.32 5.65 11
| 0.00 -72.83 5.65 11 |
350.0 | 0.00 0.35 -0.85 1 | 113.73 5.65 11
| 0.00 -59.41 5.65 11 |
466.7 | 0.00 11.03 -0.26 3 | 110.79 5.65 11
| 0.00 -50.27 4.83 15 |
583.3 | 0.00 10.45 -0.26 3 | 108.03 5.65 11
| 0.00 -39.36 4.83 15 |
700.0 | 0.00 4.97 2.29 22 | 104.62 5.65 11
| 0.00 -28.75 4.83 15 |
816.7 | 0.00 3.85 4.21 14 | 100.92 5.65 11
| 0.00 -18.43 4.83 15 |
933.3 | 0.00 12.43 4.21 14 | 98.16 5.65 11
| 0.00 -8.44 4.83 15 |
1050.0 | 0.00 20.69 4.21 14 | 94.40 5.65 11
| 0.00 -5.54 3.07 23 |
1166.7 | 0.00 28.66 4.21 14 | 90.43 5.65 11
| 0.00 -7.53 0.26 4 |
1283.3 | 0.00 34.94 5.65 11 | 88.22 5.65 11
| 0.00 -6.95 0.26 4 |
1400.0 | 0.00 44.94 5.65 11 | 84.19 5.65 11
| 0.00 -6.36 0.26 4 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 691.17 402.07 207.87 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 313.48
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 381 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 382
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 9-10í 6-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 661.7 mm AWAY FROM START SUPPORT
VY = 105.72 MX = 5.65 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 3 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 125.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 194.31 20.02 14 |-1761.68 6.12 12
| 0.00 -56.12 9.20 2 |
10.4 | 0.00 179.91 20.02 14 |-1761.71 6.12 12
| 0.00 -11.99 24.79 21 |
20.8 | 0.00 165.52 20.02 14 |-1761.74 6.12 12
| 0.00 -63.27 -2.38 4 |
31.3 | 0.00 151.12 20.02 14 |-1761.78 6.12 12
| 0.00 -41.41 9.20 2 |
41.7 | 0.00 80.83 21.45 11 |-1761.82 6.12 12
| 0.00 -48.63 7.41 23 |
52.1 | 0.00 90.11 6.12 12 |-1761.85 6.12 12
| 0.00 -54.01 7.41 23 |
62.5 | 0.00 107.93 20.02 14 |-1761.89 6.12 12
| 0.00 -59.39 7.41 23 |
72.9 | 0.00 93.53 20.02 14 |-1761.93 6.12 12
| 0.00 -21.78 9.20 2 |
83.3 | 0.00 53.61 2.38 3 |-1761.96 6.12 12
| 0.00 -49.54 14.30 15 |
93.8 | 0.00 80.46 14.56 22 |-1762.01 6.12 12
| 0.00 -75.54 7.41 23 |
104.2 | 0.00 70.25 14.56 22 |-1762.05 6.12 12
| 0.00 -70.61 14.30 15 |
114.6 | 0.00 60.03 14.56 22 |-1762.08 6.12 12
| 0.00 -81.14 14.30 15 |
125.0 | 0.00 49.82 14.56 22 |-1762.13 6.12 12
| 0.00 -91.68 14.30 15 |
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 382 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 383
============================================================================
B E A M N O. 4 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.37 0.29 1 | 40.17 1.54 11
| 0.00 -8.10 1.54 11 |
262.5 | 0.00 2.93 1.58 12 | 35.30 1.54 11
| 0.00 -1.23 -0.29 2 |
525.0 | 0.00 9.53 1.58 12 | 28.52 1.54 11
| 0.00 -1.09 -0.29 2 |
787.5 | 0.00 14.68 1.58 12 | 21.54 1.54 11
| 0.00 -0.46 0.42 3 |
1050.0 | 0.00 21.53 1.54 11 | 13.88 1.54 11
| 0.00 -0.80 -0.29 2 |
1312.5 | 0.00 23.87 1.54 11 | 3.20 1.73 14
| 0.00 -0.66 -0.29 2 |
1575.0 | 0.00 23.76 1.54 11 | -5.12 1.54 11
| 0.00 0.00 0.00 1 |
1837.5 | 0.00 21.19 1.54 11 | -13.83 1.54 11
| 0.00 -0.18 0.42 3 |
2100.0 | 0.00 16.16 1.54 11 | -24.11 1.54 11
| 0.00 -0.24 -0.29 2 |
2362.5 | 0.00 8.87 1.54 11 | -31.78 1.54 11
| 0.00 -0.03 0.42 3 |
2625.0 | 0.00 0.18 0.40 6 | -38.76 1.54 11
| 0.00 -0.32 1.73 14 |
2887.5 | 0.00 0.11 0.42 3 | -45.54 1.54 11
| 0.00 -11.61 1.54 11 |
3150.0 | 0.00 0.18 0.42 3 | -50.41 1.54 11
| 0.00 -24.22 1.54 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 0.00 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 2-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 383 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 384
============================================================================
B E A M N O. 5 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.64 -0.07 1 | 48.46 -0.11 11
| 0.00 -25.38 -0.11 11 |
258.3 | 0.00 0.27 -0.32 4 | 43.66 -0.11 11
| 0.00 -13.46 -0.11 11 |
516.7 | 0.00 0.17 -0.32 4 | 36.99 -0.11 11
| 0.00 -3.69 0.00 13 |
775.0 | 0.00 5.80 -0.11 11 | 30.21 -0.11 11
| 0.00 -0.84 0.07 2 |
1033.3 | 0.00 12.59 -0.11 11 | 22.69 -0.11 11
| 0.00 -0.57 0.07 2 |
1291.7 | 0.00 17.20 -0.11 11 | 12.63 -0.11 11
| 0.00 -0.10 -0.32 4 |
1550.0 | 0.00 15.79 0.29 14 | 2.85 -0.47 15
| 0.00 -0.03 0.07 2 |
1808.3 | 0.00 19.32 -0.11 11 | -3.98 -0.47 15
| 0.00 -0.06 -0.01 7 |
2066.7 | 0.00 16.83 -0.11 11 | -14.49 -0.11 11
| 0.00 -0.38 -0.32 4 |
2325.0 | 0.00 12.16 -0.11 11 | -22.01 -0.11 11
| 0.00 -0.47 -0.32 4 |
2583.3 | 0.00 5.52 -0.11 11 | -28.79 -0.11 11
| 0.00 -1.04 -0.07 1 |
2841.7 | 0.00 1.31 0.07 2 | -35.46 -0.11 11
| 0.00 -3.86 -0.18 12 |
3100.0 | 0.00 1.58 0.07 2 | -40.26 -0.11 11
| 0.00 -12.66 -0.11 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 384 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 385
============================================================================
B E A M N O. 6 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.37 -0.04 1 | 43.80 -4.38 11
| 0.00 -20.56 -3.45 13 |
262.5 | 0.00 3.05 0.69 4 | 37.51 -4.38 11
| 0.00 -11.39 -1.96 21 |
525.0 | 0.00 9.48 -2.09 20 | 30.00 -4.38 11
| 0.00 -4.70 -1.96 21 |
787.5 | 0.00 13.60 -3.56 12 | 22.66 -4.38 11
| 0.00 -3.41 0.04 2 |
1050.0 | 0.00 15.93 -3.56 12 | 14.97 -4.38 11
| 0.00 -1.99 -0.69 3 |
1312.5 | 0.00 19.40 -4.38 11 | 5.36 -4.33 14
| 0.00 -1.63 -0.69 3 |
1575.0 | 0.00 19.57 -4.38 11 | -4.07 -4.38 11
| 0.00 -1.28 -0.69 3 |
1837.5 | 0.00 17.27 -4.38 11 | -12.80 -4.38 11
| 0.00 -0.93 -0.69 3 |
2100.0 | 0.00 12.51 -4.38 11 | -23.10 -4.38 11
| 0.00 -3.19 -0.04 1 |
2362.5 | 0.00 9.80 -3.45 13 | -30.79 -4.38 11
| 0.00 -3.79 -2.09 20 |
2625.0 | 0.00 7.09 -1.96 21 | -38.13 -4.38 11
| 0.00 -9.89 -3.56 12 |
2887.5 | 0.00 7.16 0.04 2 | -45.64 -4.38 11
| 0.00 -20.31 -3.56 12 |
3150.0 | 0.00 8.48 0.04 2 | -51.94 -4.38 11
| 0.00 -32.14 -3.56 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 216.06
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 385 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 386
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 26.25 MX = -4.38 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 7 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 21.67 -0.10 1 | 52.11 2.00 13
| 0.00 -48.74 2.00 13 |
258.3 | 0.00 18.64 -0.10 1 | 47.16 2.00 13
| 0.00 -35.92 2.00 13 |
516.7 | 0.00 19.81 0.91 20 | 41.27 2.00 13
| 0.00 -27.03 1.21 21 |
775.0 | 0.00 19.33 0.91 20 | 35.50 2.00 13
| 0.00 -18.42 1.21 21 |
1033.3 | 0.00 16.79 1.76 12 | 29.47 2.00 13
| 0.00 -10.89 1.21 21 |
1291.7 | 0.00 16.12 1.76 12 | 21.41 2.00 13
| 0.00 -4.49 1.21 21 |
1550.0 | 0.00 9.87 1.87 16 | 14.57 2.00 13
| 0.00 -3.50 0.10 2 |
1808.3 | 0.00 10.68 2.35 11 | -20.41 1.76 12
| 0.00 -0.38 0.58 4 |
2066.7 | 0.00 8.90 2.00 13 | -28.47 1.76 12
| 0.00 -2.56 -0.10 1 |
2325.0 | 0.00 8.07 2.00 13 | -34.50 1.76 12
| 0.00 -7.54 0.91 20 |
2583.3 | 0.00 9.82 1.21 21 | -40.27 1.76 12
| 0.00 -15.03 1.76 12 |
2841.7 | 0.00 11.64 0.10 2 | -46.16 1.76 12
| 0.00 -26.23 1.76 12 |
3100.0 | 0.00 14.67 0.10 2 | -51.12 1.76 12
| 0.00 -38.79 1.76 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 299.28 178.50 178.50 178.50 237.27
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 386 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 387
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 38.07 MX = 2.00 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -39.73 MX = 1.76 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 8 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.63 -0.34 3 | 107.11 -6.80 11
| 0.00 -83.89 -6.80 11 |
116.7 | 0.00 7.32 -0.34 3 | 104.35 -6.80 11
| 0.00 -71.56 -6.80 11 |
233.3 | 0.00 7.01 -0.34 3 | 101.36 -6.80 11
| 0.00 -59.55 -6.80 11 |
350.0 | 0.00 1.30 1.77 2 | 98.40 -6.80 11
| 0.00 -46.36 -5.04 15 |
466.7 | 0.00 6.39 -0.34 3 | 95.37 -6.80 11
| 0.00 -36.60 -6.80 11 |
583.3 | 0.00 6.08 -0.34 3 | 91.82 -6.80 11
| 0.00 -25.67 -6.80 11 |
700.0 | 0.00 1.09 -3.34 22 | 88.59 -6.80 11
| 0.00 -19.04 -5.04 15 |
816.7 | 0.00 5.83 -3.34 22 | 85.35 -6.80 11
| 0.00 -10.56 -5.04 15 |
933.3 | 0.00 9.98 -5.85 14 | 81.81 -6.80 11
| 0.00 -2.39 -5.04 15 |
1050.0 | 0.00 17.11 -5.85 14 | 78.78 -6.80 11
| 0.00 -4.84 0.34 4 |
1166.7 | 0.00 23.13 -6.80 11 | 75.82 -6.80 11
| 0.00 -4.53 0.34 4 |
1283.3 | 0.00 31.80 -6.80 11 | 72.82 -6.80 11
| 0.00 -4.22 0.34 4 |
1400.0 | 0.00 40.13 -6.80 11 | 70.07 -6.80 11
| 0.00 -3.91 0.34 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 387 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 388
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 578.27 317.70 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 295.03
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 667.0 mm AWAY FROM START SUPPORT
VY = 89.56 MX = -6.80 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 9 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 388 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 389
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.24 0.34 2 | 51.92 -0.62 11
| 0.00 -28.64 -0.90 12 |
285.4 | 0.00 0.30 -0.71 3 | 45.08 -0.62 11
| 0.00 -16.71 -0.90 12 |
570.8 | 0.00 3.82 0.34 2 | 36.97 -0.62 11
| 0.00 -6.83 -0.83 20 |
856.3 | 0.00 9.36 -0.10 13 | 29.04 -0.62 11
| 0.00 -3.11 -0.34 1 |
1141.7 | 0.00 13.94 -0.62 11 | 17.97 -0.90 12
| 0.00 -2.40 -0.34 1 |
1427.1 | 0.00 18.06 -0.62 11 | 10.75 -0.90 12
| 0.00 -1.69 -0.34 1 |
1712.5 | 0.00 15.44 -0.58 18 | -0.96 -1.36 14
| 0.00 -0.98 -0.34 1 |
1997.9 | 0.00 17.41 -0.62 11 | -9.63 -1.36 14
| 0.00 -0.24 0.71 4 |
2283.3 | 0.00 12.63 -0.62 11 | -16.85 -1.36 14
| 0.00 -0.23 0.71 4 |
2568.8 | 0.00 5.45 -0.90 12 | -31.33 -0.62 11
| 0.00 -1.16 0.34 2 |
2854.2 | 0.00 1.87 -0.34 1 | -39.26 -0.62 11
| 0.00 -6.23 -0.10 13 |
3139.6 | 0.00 2.58 -0.34 1 | -47.37 -0.62 11
| 0.00 -17.36 -0.62 11 |
3425.0 | 0.00 3.29 -0.34 1 | -54.21 -0.62 11
| 0.00 -31.86 -0.62 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 186.06
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 37.82 MX = -0.62 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 389 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 390
============================================================================
B E A M N O. 10 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3750.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 17.64 -0.78 2 | 55.38 -2.15 11
| 0.00 -43.57 -0.78 12 |
312.5 | 0.00 14.41 -0.78 2 | 47.88 -2.15 11
| 0.00 -26.80 -0.78 12 |
625.0 | 0.00 17.69 -2.27 21 | 38.93 -2.15 11
| 0.00 -15.87 0.06 20 |
937.5 | 0.00 19.51 -2.65 13 | 30.18 -2.15 11
| 0.00 -2.52 0.38 4 |
1250.0 | 0.00 21.74 -2.65 13 | 18.71 -2.15 11
| 0.00 -1.54 0.38 4 |
1562.5 | 0.00 21.29 -2.65 13 | -11.35 -2.27 21
| 0.00 -1.50 0.78 1 |
1875.0 | 0.00 24.97 -2.15 11 | -15.62 -2.65 13
| 0.00 -0.40 -0.38 3 |
2187.5 | 0.00 21.84 -2.15 11 | -25.82 -2.65 13
| 0.00 -4.95 -0.78 2 |
2500.0 | 0.00 19.99 0.06 20 | -33.83 -2.65 13
| 0.00 -8.18 -0.78 2 |
2812.5 | 0.00 19.77 0.06 20 | -43.00 -2.65 13
| 0.00 -14.44 -2.27 21 |
3125.0 | 0.00 17.91 0.06 20 | -50.00 -2.65 13
| 0.00 -25.98 -2.27 21 |
3437.5 | 0.00 17.86 0.78 1 | -57.16 -2.65 13
| 0.00 -41.04 -2.65 13 |
3750.0 | 0.00 21.09 0.78 1 | -63.16 -2.65 13
| 0.00 -59.83 -2.65 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 256.17 178.50 178.50 178.50 373.84
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 390 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 391
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 41.31 MX = -2.15 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -49.08 MX = -2.65 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 11 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 15.62 0.10 4 | 51.90 0.47 11
| 0.00 -39.08 0.25 14 |
287.5 | 0.00 14.29 0.39 23 | 44.99 0.47 11
| 0.00 -19.67 -0.44 13 |
575.0 | 0.00 16.93 0.39 23 | 38.08 -0.44 13
| 0.00 -16.18 0.10 22 |
862.5 | 0.00 18.25 0.49 15 | 31.55 -0.44 13
| 0.00 -2.73 0.25 14 |
1150.0 | 0.00 21.01 0.49 15 | 24.68 -0.44 13
| 0.00 -6.46 -0.10 3 |
1437.5 | 0.00 20.67 0.47 11 | 15.02 -0.78 21
| 0.00 -4.17 -0.10 3 |
1725.0 | 0.00 21.72 0.47 11 | -11.97 1.27 20
| 0.00 -1.80 0.68 1 |
2012.5 | 0.00 19.70 0.47 11 | -18.01 1.19 12
| 0.00 -3.91 0.68 1 |
2300.0 | 0.00 16.45 -0.78 21 | -27.39 1.19 12
| 0.00 -1.59 1.27 20 |
2587.5 | 0.00 15.62 -0.78 21 | -34.26 1.19 12
| 0.00 -8.74 1.27 20 |
2875.0 | 0.00 13.44 -0.78 21 | -40.79 1.19 12
| 0.00 -17.24 1.27 20 |
3162.5 | 0.00 12.33 -0.68 2 | -47.49 1.19 12
| 0.00 -27.90 1.19 12 |
3450.0 | 0.00 14.44 -0.68 2 | -53.02 1.19 12
| 0.00 -42.34 1.19 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 224.35 178.50 178.50 178.50 252.83
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 391 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 392
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 38.87 MX = -0.44 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 12 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.43 0.47 4 | 96.87 1.65 11
| 0.00 -86.40 1.65 11 |
208.3 | 0.00 7.75 0.47 4 | 91.91 1.65 11
| 0.00 -66.74 1.65 11 |
416.7 | 0.00 0.03 -2.58 2 | 86.18 1.65 11
| 0.00 -48.16 1.65 11 |
625.0 | 0.00 6.38 0.47 4 | 63.61 4.42 12
| 0.00 -32.28 0.75 14 |
833.3 | 0.00 5.70 0.47 4 | 58.94 4.42 12
| 0.00 -18.54 0.75 14 |
1041.7 | 0.00 5.02 0.47 4 | 52.94 4.42 12
| 0.00 -0.63 4.99 20 |
1250.0 | 0.00 16.04 1.89 15 | 47.74 4.42 12
| 0.00 -4.33 -0.47 3 |
1458.3 | 0.00 24.76 1.89 15 | 42.54 4.42 12
| 0.00 -0.75 2.58 1 |
1666.7 | 0.00 27.70 4.42 12 | 36.55 4.42 12
| 0.00 -0.89 2.58 1 |
1875.0 | 0.00 45.12 1.65 11 | 31.87 4.42 12
| 0.00 -1.04 2.58 1 |
2083.3 | 0.00 53.02 1.65 11 | 27.37 4.42 12
| 0.00 -1.18 2.58 1 |
2291.7 | 0.00 59.75 1.65 11 | 22.78 4.42 12
| 0.00 -1.32 2.58 1 |
2500.0 | 0.00 65.38 1.65 11 | 18.81 4.42 12
| 0.00 -1.47 2.58 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 392 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 393
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 539.01 189.27 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 274.66 399.32
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 7-10í 3-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 541.4 mm AWAY FROM START SUPPORT
VY = 65.52 MX = 4.42 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 13 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 393 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 394
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.83 -3.84 14 | -106.12 -4.33 11
| 0.00 -3.70 -2.13 23 |
91.7 | 0.00 8.52 -3.05 22 | -108.27 -4.33 11
| 0.00 -7.86 -3.10 15 |
183.3 | 0.00 3.86 -3.05 22 | -110.58 -4.33 11
| 0.00 -16.31 -3.10 15 |
275.0 | 0.00 -20.89 -2.13 23 | -112.86 -4.33 11
| 0.00 -24.94 -3.10 15 |
366.7 | 0.00 7.02 -0.31 3 | -115.19 -4.33 11
| 0.00 -31.63 -4.33 11 |
458.3 | 0.00 1.38 -1.03 1 | -117.84 -4.33 11
| 0.00 -42.70 -3.10 15 |
550.0 | 0.00 7.74 -0.31 3 | -120.29 -4.33 11
| 0.00 -53.22 -4.33 11 |
641.7 | 0.00 1.80 -1.03 1 | -122.75 -4.33 11
| 0.00 -61.21 -3.10 15 |
733.3 | 0.00 2.01 -1.03 1 | -125.40 -4.33 11
| 0.00 -75.74 -4.33 11 |
825.0 | 0.00 8.81 -0.31 3 | -127.72 -4.33 11
| 0.00 -87.34 -4.33 11 |
916.7 | 0.00 9.17 -0.31 3 | -130.01 -4.33 11
| 0.00 -99.16 -4.33 11 |
1008.3 | 0.00 9.53 -0.31 3 | -132.32 -4.33 11
| 0.00 -111.18 -4.33 11 |
1100.0 | 0.00 9.89 -0.31 3 | -134.47 -4.33 11
| 0.00 -123.41 -4.33 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 350.12 579.64 854.57
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 5-10í 8-10í 11-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 658.6 mm AWAY FROM END SUPPORT
VY = -117.21 MX = -4.33 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 394 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 395
============================================================================
B E A M N O. 14 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 22.64 0.02 20 | 52.02 0.37 13
| 0.00 -40.40 0.30 21 |
264.6 | 0.00 23.41 0.02 20 | 46.95 0.37 13
| 0.00 -24.75 0.37 13 |
529.2 | 0.00 20.61 0.14 12 | 40.88 0.37 13
| 0.00 -18.97 0.30 21 |
793.8 | 0.00 22.32 0.14 12 | 34.96 0.37 13
| 0.00 -10.56 0.09 2 |
1058.3 | 0.00 22.34 0.14 12 | 28.75 0.37 13
| 0.00 -7.07 0.09 2 |
1322.9 | 0.00 20.27 0.32 11 | 23.03 0.30 21
| 0.00 -3.58 0.09 2 |
1587.5 | 0.00 20.72 0.32 11 | -21.04 0.02 20
| 0.00 -0.45 0.56 4 |
1852.1 | 0.00 18.98 0.37 13 | -25.32 0.14 12
| 0.00 -3.39 -0.09 1 |
2116.7 | 0.00 19.50 0.37 13 | -33.66 0.14 12
| 0.00 -6.87 -0.09 1 |
2381.2 | 0.00 19.47 0.30 21 | -39.87 0.14 12
| 0.00 -11.60 0.02 20 |
2645.8 | 0.00 20.14 0.30 21 | -45.79 0.14 12
| 0.00 -21.38 0.02 20 |
2910.4 | 0.00 19.73 0.30 21 | -51.86 0.14 12
| 0.00 -32.25 0.02 20 |
3175.0 | 0.00 20.81 0.09 2 | -56.93 0.14 12
| 0.00 -45.40 0.14 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 232.60 178.50 178.50 178.50 260.72
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 395 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 396
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -45.54 MX = 0.14 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 15 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.94 -0.08 1 | 52.55 1.17 11
| 0.00 -14.09 1.17 11 |
291.7 | 0.00 1.17 0.84 12 | 47.20 1.17 11
| 0.00 -0.42 1.04 13 |
583.3 | 0.00 13.16 1.17 11 | 39.39 1.17 11
| 0.00 -0.38 0.08 2 |
875.0 | 0.00 19.25 0.94 14 | 31.53 1.17 11
| 0.00 -0.34 -0.00 4 |
1166.7 | 0.00 31.38 1.17 11 | 20.85 1.17 11
| 0.00 -0.19 -0.08 1 |
1458.3 | 0.00 29.58 1.04 13 | 11.57 1.17 11
| 0.00 -0.47 -0.08 1 |
1750.0 | 0.00 38.14 1.17 11 | 1.92 1.04 13
| 0.00 -0.76 -0.08 1 |
2041.7 | 0.00 30.70 1.04 13 | -9.68 1.17 11
| 0.00 -1.04 -0.08 1 |
2333.3 | 0.00 27.57 1.04 13 | -18.96 1.17 11
| 0.00 -0.04 0.00 3 |
2625.0 | 0.00 25.20 1.17 11 | -29.64 1.17 11
| 0.00 -1.61 -0.08 1 |
2916.7 | 0.00 15.36 1.17 11 | -37.50 1.17 11
| 0.00 -1.89 -0.08 1 |
3208.3 | 0.00 5.18 1.04 13 | -45.32 1.17 11
| 0.00 -2.17 -0.08 1 |
3500.0 | 0.00 2.46 0.08 2 | -50.66 1.17 11
| 0.00 -11.58 0.84 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 227.74 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 396 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 397
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 16 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.73 -1.36 12 | 24.77 -2.45 14
| 0.00 -2.34 0.27 2 |
289.6 | 0.00 11.85 -1.30 11 | 20.37 -2.45 14
| 0.00 -0.34 -1.18 3 |
579.2 | 0.00 18.21 -1.30 11 | 14.41 -2.45 14
| 0.00 -0.13 0.02 8 |
868.7 | 0.00 22.33 -1.30 11 | 7.59 -2.45 14
| 0.00 -0.33 -1.18 3 |
1158.3 | 0.00 23.73 -1.30 11 | -0.82 -2.48 22
| 0.00 -0.33 -1.18 3 |
1447.9 | 0.00 22.15 -1.30 11 | -8.51 -2.45 14
| 0.00 -0.32 -1.18 3 |
1737.5 | 0.00 17.54 -1.30 11 | -16.93 -2.45 14
| 0.00 -0.32 -1.18 3 |
2027.1 | 0.00 9.87 -1.30 11 | -25.36 -2.45 14
| 0.00 -1.70 -0.27 1 |
2316.7 | 0.00 2.08 -0.72 13 | -42.88 -1.30 11
| 0.00 -4.97 -1.11 20 |
2606.2 | 0.00 2.86 0.27 2 | -51.85 -1.30 11
| 0.00 -15.03 -1.36 12 |
2895.8 | 0.00 3.44 0.27 2 | -60.37 -1.30 11
| 0.00 -30.89 -1.30 11 |
3185.4 | 0.00 4.01 0.27 2 | -67.82 -1.30 11
| 0.00 -49.53 -1.30 11 |
3475.0 | 0.00 4.59 0.27 2 | -73.32 -1.30 11
| 0.00 -69.99 -1.30 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 424.82
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 397 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 398
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -63.07 MX = -1.30 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 17 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.13 4.79 4 | -43.11 -7.48 14
| 0.00 -1.28 -8.32 22 |
27.1 | 0.00 0.04 4.79 4 | -43.20 -7.48 14
| 0.00 -2.00 -8.32 22 |
54.2 | 0.00 0.31 -0.75 1 | -43.29 -7.48 14
| 0.00 -2.73 -8.32 22 |
81.2 | 0.00 0.14 -4.79 3 | -43.40 -7.48 14
| 0.00 -5.27 -7.48 14 |
108.3 | 0.00 0.03 -0.45 9 | -43.51 -7.48 14
| 0.00 -6.45 -7.48 14 |
135.4 | 0.00 0.31 -4.79 3 | -43.60 -7.48 14
| 0.00 -7.63 -7.48 14 |
162.5 | 0.00 0.40 -4.79 3 | -43.73 -7.48 14
| 0.00 -8.81 -7.48 14 |
189.6 | 0.00 0.49 -4.79 3 | -43.87 -7.48 14
| 0.00 -9.99 -7.48 14 |
216.7 | 0.00 0.58 -4.79 3 | -43.95 -7.48 14
| 0.00 -11.18 -7.48 14 |
243.8 | 0.00 0.67 -4.79 3 | -44.10 -7.48 14
| 0.00 -12.38 -7.48 14 |
270.8 | 0.00 0.76 -4.79 3 | -44.27 -7.48 14
| 0.00 -13.57 -7.48 14 |
297.9 | 0.00 0.84 -4.79 3 | -44.35 -7.48 14
| 0.00 -14.77 -7.48 14 |
325.0 | 0.00 0.93 -4.79 3 | -44.53 -7.48 14
| 0.00 -15.98 -7.48 14 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 398 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 399
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 18 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 11.92 0.07 1 | 48.86 0.05 11
| 0.00 -33.31 -0.05 13 |
285.4 | 0.00 9.73 0.07 1 | 44.22 -0.05 13
| 0.00 -20.12 -0.05 13 |
570.8 | 0.00 1.52 0.92 23 | 38.28 -0.05 13
| 0.00 -8.36 -0.05 13 |
856.3 | 0.00 14.54 0.13 12 | 31.52 -0.05 13
| 0.00 -2.99 -0.07 21 |
1141.7 | 0.00 16.77 0.05 11 | 23.46 -0.05 13
| 0.00 -3.17 -0.07 2 |
1427.1 | 0.00 20.37 0.05 11 | 14.34 -0.05 13
| 0.00 -0.99 -0.07 2 |
1712.5 | 0.00 20.54 0.05 11 | -14.48 0.15 20
| 0.00 -1.20 0.07 1 |
1997.9 | 0.00 17.15 0.05 11 | -23.37 0.13 12
| 0.00 -3.38 0.07 1 |
2283.3 | 0.00 14.95 -0.05 13 | -32.48 0.13 12
| 0.00 -5.57 0.07 1 |
2568.8 | 0.00 11.56 -0.07 21 | -40.54 0.13 12
| 0.00 -11.70 0.15 20 |
2854.2 | 0.00 9.94 -0.07 2 | -47.31 0.13 12
| 0.00 -21.54 0.13 12 |
3139.6 | 0.00 12.13 -0.07 2 | -55.07 0.05 11
| 0.00 -35.87 0.13 12 |
3425.0 | 0.00 14.31 -0.07 2 | -60.14 0.05 11
| 0.00 -51.64 0.13 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 399 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 400
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 188.53 178.50 178.50 178.50 298.11
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -45.35 MX = 0.13 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 19 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 200.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 400 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 401
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.04 -8.48 2 | -47.59 32.14 12
| 0.00 -3.56 32.14 12 |
16.7 | 0.00 0.13 -8.48 2 | -47.64 32.14 12
| 0.00 -4.35 32.14 12 |
33.3 | 0.00 0.21 -8.48 2 | -47.69 32.14 12
| 0.00 -5.15 32.14 12 |
50.0 | 0.00 0.30 -8.48 2 | -47.75 32.14 12
| 0.00 -5.94 32.14 12 |
66.7 | 0.00 0.38 -8.48 2 | -47.82 32.14 12
| 0.00 -6.74 32.14 12 |
83.3 | 0.00 0.46 -8.48 2 | -47.87 32.14 12
| 0.00 -7.53 32.14 12 |
100.0 | 0.00 0.55 -8.48 2 | -47.94 32.14 12
| 0.00 -8.33 32.14 12 |
116.7 | 0.00 0.63 -8.48 2 | -48.01 32.14 12
| 0.00 -9.13 32.14 12 |
133.3 | 0.00 0.72 -8.48 2 | -48.07 32.14 12
| 0.00 -9.17 23.23 16 |
150.0 | 0.00 0.80 -8.48 2 | -48.15 32.14 12
| 0.00 -10.74 32.14 12 |
166.7 | 0.00 0.88 -8.48 2 | -48.23 32.14 12
| 0.00 -11.54 32.14 12 |
183.3 | 0.00 0.97 -8.48 2 | -48.28 32.14 12
| 0.00 -12.34 32.14 12 |
200.0 | 0.00 1.05 -8.48 2 | -48.37 32.14 12
| 0.00 -13.15 32.14 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 326.38 340.99 355.73 370.61 385.64
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 368.56 353.81 339.08 324.37 309.67
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 5-10í 5-10í 5-10í 5-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 5-10í 5-10í 5-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 135 mm c/c @ 135 mm c/c @ 135 mm c/c @ 135 mm c/c @ 135 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -66.62 MX = 32.14 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 401 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 402
============================================================================
B E A M N O. 22 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.06 -0.12 1 | 36.70 1.97 11
| 0.00 -19.36 1.71 13 |
262.5 | 0.00 8.82 0.80 20 | 31.67 1.97 11
| 0.00 -3.86 1.59 17 |
525.0 | 0.00 10.38 1.43 12 | 25.26 1.97 11
| 0.00 -3.27 1.71 13 |
787.5 | 0.00 13.57 1.43 12 | 20.09 1.71 13
| 0.00 -4.50 0.12 2 |
1050.0 | 0.00 15.22 1.43 12 | 14.17 1.71 13
| 0.00 -3.31 0.12 2 |
1312.5 | 0.00 15.95 1.97 11 | 8.25 1.71 13
| 0.00 -2.13 0.12 2 |
1575.0 | 0.00 15.91 1.97 11 | -8.51 1.43 12
| 0.00 -0.94 0.12 2 |
1837.5 | 0.00 11.43 1.71 13 | -11.25 1.97 11
| 0.00 -0.01 -0.39 4 |
2100.0 | 0.00 10.00 1.97 11 | -18.65 1.97 11
| 0.00 -1.43 -0.12 1 |
2362.5 | 0.00 6.45 1.71 13 | -26.05 1.97 11
| 0.00 -1.98 0.80 20 |
2625.0 | 0.00 3.87 1.15 21 | -32.98 1.97 11
| 0.00 -7.49 1.43 12 |
2887.5 | 0.00 4.99 0.12 2 | -39.38 1.97 11
| 0.00 -16.57 1.43 12 |
3150.0 | 0.00 6.18 0.12 2 | -44.42 1.97 11
| 0.00 -26.83 1.43 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 402 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 403
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 25.30 MX = 1.97 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -32.61 MX = 1.97 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 24 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.60 -2.39 21 | 48.23 -4.30 11
| 0.00 -35.83 -3.32 12 |
289.6 | 0.00 13.96 -2.39 21 | 42.77 -4.30 11
| 0.00 -21.53 -3.32 12 |
579.2 | 0.00 14.34 -2.39 21 | 34.98 -4.30 11
| 0.00 -8.70 -3.32 12 |
868.7 | 0.00 15.83 -3.56 13 | 34.10 -3.32 12
| 0.00 -5.63 0.10 1 |
1158.3 | 0.00 17.78 -4.30 11 | 27.61 -3.32 12
| 0.00 -2.52 0.10 1 |
1447.9 | 0.00 21.02 -4.30 11 | 16.65 -3.32 12
| 0.00 -0.64 -0.35 3 |
1737.5 | 0.00 20.85 -4.30 11 | -18.24 -3.56 13
| 0.00 -3.70 -0.10 2 |
2027.1 | 0.00 21.85 -3.32 12 | -28.26 -3.56 13
| 0.00 -6.81 -0.10 2 |
2316.7 | 0.00 19.74 -3.32 12 | -39.23 -3.56 13
| 0.00 -10.96 -2.39 21 |
2606.2 | 0.00 18.72 -2.09 20 | -41.23 -4.30 11
| 0.00 -20.37 -2.39 21 |
2895.8 | 0.00 17.32 -2.09 20 | -51.50 -4.30 11
| 0.00 -31.00 -3.56 13 |
3185.4 | 0.00 19.25 0.10 1 | -58.81 -4.30 11
| 0.00 -47.58 -3.56 13 |
3475.0 | 0.00 22.36 0.10 1 | -65.54 -4.30 11
| 0.00 -65.81 -3.56 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 235.51 178.08 178.08 178.08 421.91
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 403 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 404
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 36.12 MX = -4.30 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -49.33 MX = -4.30 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 26 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 63.92 -1.08 11 | -110.74 -1.08 11
| 0.00 -4.06 -0.52 3 |
122.9 | 0.00 45.65 -0.24 15 | -112.85 -1.08 11
| 0.00 -4.59 -0.52 3 |
245.8 | 0.00 35.06 -0.24 15 | -115.50 -1.08 11
| 0.00 -5.11 -0.52 3 |
368.8 | 0.00 24.22 -0.24 15 | -118.08 -1.08 11
| 0.00 -5.64 -0.52 3 |
491.7 | 0.00 13.13 0.32 23 | -120.81 -1.08 11
| 0.00 -1.71 -1.49 14 |
614.6 | 0.00 6.65 0.32 23 | -124.68 -1.08 11
| 0.00 -14.41 -1.49 14 |
737.5 | 0.00 0.69 0.05 10 | -127.87 -1.08 11
| 0.00 -27.45 -1.49 14 |
860.4 | 0.00 0.25 0.53 1 | -131.05 -1.08 11
| 0.00 -32.40 -0.92 18 |
983.3 | 0.00 8.29 0.52 4 | -134.93 -1.08 11
| 0.00 -55.75 -1.08 11 |
1106.3 | 0.00 8.82 0.52 4 | -137.65 -1.08 11
| 0.00 -72.49 -1.08 11 |
1229.2 | 0.00 9.35 0.52 4 | -140.23 -1.08 11
| 0.00 -89.58 -1.08 11 |
1352.1 | 0.00 9.88 0.52 4 | -142.88 -1.08 11
| 0.00 -106.99 -1.08 11 |
1475.0 | 0.00 10.41 0.52 4 | -144.99 -1.08 11
| 0.00 -124.68 -1.08 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 404 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 405
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 437.25 822.84
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 383.25 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 6-10í 11-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 658.6 mm AWAY FROM END SUPPORT
VY = -129.46 MX = -1.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 28 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 405 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 406
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.68 0.27 2 | 45.91 0.97 11
| 0.00 -35.82 0.45 12 |
258.3 | 0.00 9.15 0.27 2 | 41.12 0.97 11
| 0.00 -24.99 0.45 12 |
516.7 | 0.00 7.63 0.27 2 | 34.54 0.97 11
| 0.00 -15.29 0.45 12 |
775.0 | 0.00 9.52 0.88 21 | 27.83 0.97 11
| 0.00 -6.98 0.45 12 |
1033.3 | 0.00 10.78 1.10 13 | 20.41 0.97 11
| 0.00 -0.33 -0.59 4 |
1291.7 | 0.00 10.49 0.97 11 | 15.56 0.45 12
| 0.00 -3.07 -0.27 1 |
1550.0 | 0.00 12.11 0.97 11 | -8.27 0.88 21
| 0.00 -0.09 -0.59 4 |
1808.3 | 0.00 11.30 0.97 11 | -13.06 1.10 13
| 0.00 -0.04 0.59 3 |
2066.7 | 0.00 8.21 0.97 11 | -20.89 1.10 13
| 0.00 -0.16 0.59 3 |
2325.0 | 0.00 5.92 0.45 12 | -26.83 1.10 13
| 0.00 -3.30 0.88 21 |
2583.3 | 0.00 4.54 -0.27 1 | -32.20 1.10 13
| 0.00 -9.00 1.10 13 |
2841.7 | 0.00 6.07 -0.27 1 | -37.47 1.10 13
| 0.00 -18.05 1.10 13 |
3100.0 | 0.00 7.59 -0.27 1 | -42.78 0.97 11
| 0.00 -28.24 1.10 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 207.57 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 30.99 MX = 0.97 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 406 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 407
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -31.73 MX = 1.10 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 29 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.21 -0.36 3 | 52.62 3.46 12
| 0.00 -57.79 1.90 15 |
250.0 | 0.00 4.55 -1.66 2 | 49.05 3.46 12
| 0.00 -32.05 1.60 16 |
500.0 | 0.00 7.83 -0.36 3 | 43.71 3.46 12
| 0.00 -24.29 1.52 23 |
750.0 | 0.00 5.64 -0.36 3 | 38.62 3.46 12
| 0.00 -18.58 1.90 15 |
1000.0 | 0.00 1.72 -1.66 2 | 33.03 3.46 12
| 0.00 -8.19 1.90 15 |
1250.0 | 0.00 1.03 3.46 12 | 23.64 3.46 12
| 0.00 -0.49 3.47 20 |
1500.0 | 0.00 6.18 3.46 12 | 16.52 3.46 12
| 0.00 -0.17 -1.66 2 |
1750.0 | 0.00 11.70 1.90 15 | 9.41 3.46 12
| 0.00 -1.11 -1.66 2 |
2000.0 | 0.00 10.41 3.46 12 | 3.99 3.47 20
| 0.00 -5.30 -0.36 3 |
2250.0 | 0.00 15.17 1.90 15 | -5.58 3.46 12
| 0.00 -7.59 0.43 22 |
2500.0 | 0.00 16.49 1.52 23 | -10.67 3.46 12
| 0.00 -12.57 0.43 22 |
2750.0 | 0.00 17.27 1.52 23 | -16.01 3.46 12
| 0.00 -18.36 0.43 22 |
3000.0 | 0.00 17.34 1.52 23 | -30.14 1.83 11
| 0.00 -24.03 1.03 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 353.56 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 407 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 408
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 43.32 MX = 3.46 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -9.81 MX = 3.46 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 32 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 17.53 -0.59 3 | 68.84 -9.32 11
| 0.00 -59.77 -6.74 15 |
91.7 | 0.00 4.48 -5.48 22 | 67.30 -9.32 11
| 0.00 -53.50 -6.74 15 |
183.3 | 0.00 15.41 -0.59 3 | 65.52 -9.32 11
| 0.00 -47.36 -6.74 15 |
275.0 | 0.00 14.34 -0.59 3 | 63.60 -9.32 11
| 0.00 -41.35 -6.74 15 |
366.7 | 0.00 8.30 -5.48 22 | 61.46 -9.32 11
| 0.00 -35.49 -6.74 15 |
458.3 | 0.00 9.38 -5.48 22 | 59.43 -9.32 11
| 0.00 -29.78 -6.74 15 |
550.0 | 0.00 10.34 -5.48 22 | 56.99 -9.32 11
| 0.00 -13.57 -9.32 11 |
641.7 | 0.00 11.21 -5.48 22 | 54.39 -9.32 11
| 0.00 -19.08 -3.71 23 |
733.3 | 0.00 11.96 -5.48 22 | 52.36 -9.32 11
| 0.00 -3.40 -7.78 12 |
825.0 | 0.00 10.45 -8.16 14 | 49.71 -9.32 11
| 0.00 -8.68 -6.74 15 |
916.7 | 0.00 12.74 -8.16 14 | 46.93 -9.32 11
| 0.00 -3.84 -6.74 15 |
1008.3 | 0.00 14.85 -8.16 14 | 45.24 -9.32 11
| 0.00 -4.00 -3.71 23 |
1100.0 | 0.00 16.77 -8.16 14 | 42.43 -9.32 11
| 0.00 -0.51 -3.71 23 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 408 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 409
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 416.87 302.64 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 54.33 MX = -9.32 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 34 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 409 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 410
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 14.41 -0.21 1 | 55.33 0.21 13
| 0.00 -52.06 0.21 13 |
258.3 | 0.00 11.24 -0.21 1 | 51.66 0.21 13
| 0.00 -38.24 0.21 13 |
516.7 | 0.00 2.44 -0.37 20 | 46.24 0.21 13
| 0.00 -25.57 0.21 13 |
775.0 | 0.00 4.91 -0.21 1 | 41.07 0.21 13
| 0.00 -14.27 0.21 13 |
1033.3 | 0.00 1.74 -0.21 1 | 34.05 0.21 13
| 0.00 -2.80 -0.02 17 |
1291.7 | 0.00 2.16 0.25 21 | 26.00 0.21 13
| 0.00 -2.11 -0.37 20 |
1550.0 | 0.00 8.83 0.21 13 | 20.07 0.25 21
| 0.00 -5.81 -0.37 20 |
1808.3 | 0.00 12.53 0.25 21 | -21.34 -0.37 20
| 0.00 -10.74 -0.37 20 |
2066.7 | 0.00 15.92 0.25 21 | -29.95 -0.29 12
| 0.00 -16.85 -0.37 20 |
2325.0 | 0.00 18.16 0.25 21 | -36.97 -0.29 12
| 0.00 -24.10 -0.37 20 |
2583.3 | 0.00 19.39 0.25 21 | -42.29 -0.29 12
| 0.00 -32.37 -0.37 20 |
2841.7 | 0.00 20.42 0.21 2 | -48.30 -0.29 12
| 0.00 -43.36 -0.29 12 |
3100.0 | 0.00 23.59 0.21 2 | -52.82 -0.29 12
| 0.00 -56.45 -0.29 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 302.27 178.08 178.08 178.08 329.91
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 47.45 MX = 0.21 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 410 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 411
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -38.84 MX = -0.29 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 36 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 26.38 0.57 22 | 39.00 0.98 15
| 0.00 -33.82 0.75 23 |
208.3 | 0.00 23.23 0.57 22 | 36.02 0.98 15
| 0.00 -26.45 0.75 23 |
416.7 | 0.00 19.59 0.57 22 | 32.19 0.98 15
| 0.00 -15.74 0.98 15 |
625.0 | 0.00 15.42 0.57 22 | 28.20 0.98 15
| 0.00 -13.20 0.75 23 |
833.3 | 0.00 10.34 0.84 14 | 26.51 0.75 23
| 0.00 -6.03 0.06 4 |
1041.7 | 0.00 6.12 0.84 14 | -27.91 0.57 22
| 0.00 -2.31 0.75 23 |
1250.0 | 0.00 2.89 1.23 12 | -29.64 0.84 14
| 0.00 -0.84 0.57 22 |
1458.3 | 0.00 5.81 0.75 23 | -35.55 0.84 14
| 0.00 -7.67 0.57 22 |
1666.7 | 0.00 8.78 0.75 23 | -42.91 0.84 14
| 0.00 -6.65 0.59 13 |
1875.0 | 0.00 11.03 0.75 23 | -47.53 0.84 14
| 0.00 -23.59 0.84 14 |
2083.3 | 0.00 15.02 0.06 4 | -52.69 0.84 14
| 0.00 -34.04 0.84 14 |
2291.7 | 0.00 18.53 0.06 4 | -56.87 0.84 14
| 0.00 -45.48 0.84 14 |
2500.0 | 0.00 22.04 0.06 4 | -60.78 0.84 14
| 0.00 -57.77 0.84 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 198.25 178.50 178.50 178.50 342.68
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 411 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 412
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 29.70 MX = 0.98 LD= 15
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -46.54 MX = 0.84 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 37 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 11.92 -0.48 2 | 55.98 -0.55 11
| 0.00 -47.52 0.13 12 |
245.8 | 0.00 9.89 -0.48 2 | 51.60 -0.55 11
| 0.00 -30.12 -0.46 14 |
491.7 | 0.00 7.86 -0.48 2 | 45.07 -0.55 11
| 0.00 -22.51 0.13 12 |
737.5 | 0.00 5.69 -0.98 21 | 38.86 -0.55 11
| 0.00 -10.20 -0.46 14 |
983.3 | 0.00 6.67 -0.98 21 | 35.51 0.13 12
| 0.00 -4.76 0.45 20 |
1229.2 | 0.00 10.79 -0.43 15 | 26.38 0.13 12
| 0.00 -2.84 -0.01 3 |
1475.0 | 0.00 13.38 -0.55 11 | 18.44 0.45 20
| 0.00 -1.99 -0.01 3 |
1720.8 | 0.00 14.81 0.13 12 | 14.53 0.45 20
| 0.00 -2.27 -0.48 2 |
1966.7 | 0.00 14.43 -0.55 11 | -16.41 -1.02 13
| 0.00 -4.30 -0.48 2 |
2212.5 | 0.00 16.92 0.13 12 | -21.88 -1.02 13
| 0.00 -6.33 -0.48 2 |
2458.3 | 0.00 16.55 0.45 20 | -26.85 -1.02 13
| 0.00 -8.52 -0.98 21 |
2704.2 | 0.00 16.93 0.45 20 | -32.07 -1.02 13
| 0.00 -14.21 -0.98 21 |
2950.0 | 0.00 16.63 0.45 20 | -35.58 -1.02 13
| 0.00 -20.60 -0.98 21 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 412 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 413
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 273.31 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 44.34 MX = -0.55 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 38 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 413 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 414
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 21.82 -0.23 1 | 58.97 -0.00 13
| 0.00 -53.38 -0.00 13 |
264.6 | 0.00 18.09 -0.23 1 | 55.20 -0.00 13
| 0.00 -38.28 -0.00 13 |
529.2 | 0.00 17.31 -0.53 20 | 49.57 -0.00 13
| 0.00 -24.38 -0.00 13 |
793.8 | 0.00 13.61 -0.56 12 | 44.22 -0.00 13
| 0.00 -11.94 -0.00 13 |
1058.3 | 0.00 15.40 -0.56 12 | 36.98 -0.00 13
| 0.00 -6.93 0.23 2 |
1322.9 | 0.00 14.17 -0.35 11 | 27.74 0.16 21
| 0.00 -3.20 0.23 2 |
1587.5 | 0.00 16.62 -0.35 11 | 23.04 0.16 21
| 0.00 -0.01 0.59 3 |
1852.1 | 0.00 17.98 -0.00 13 | -23.86 -0.53 20
| 0.00 -4.24 -0.23 1 |
2116.7 | 0.00 19.75 -0.00 13 | -31.13 -0.56 12
| 0.00 -6.09 -0.53 20 |
2381.2 | 0.00 20.89 0.16 21 | -38.36 -0.56 12
| 0.00 -14.17 -0.53 20 |
2645.8 | 0.00 22.97 0.16 21 | -43.72 -0.56 12
| 0.00 -23.25 -0.53 20 |
2910.4 | 0.00 24.15 0.16 21 | -49.34 -0.56 12
| 0.00 -33.25 -0.53 20 |
3175.0 | 0.00 24.51 0.16 21 | -53.12 -0.56 12
| 0.00 -45.34 -0.56 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 307.44 178.50 178.50 178.50 264.43
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 47.74 MX = -0.00 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 414 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 415
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -40.83 MX = -0.56 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 59 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 17.37 -0.37 2 | 31.39 1.04 12
| 0.00 -38.34 1.04 12 |
291.7 | 0.00 5.69 0.15 13 | 30.30 1.04 12
| 0.00 -29.35 1.04 12 |
583.3 | 0.00 14.35 -0.02 21 | 28.09 1.04 12
| 0.00 -21.12 1.09 20 |
875.0 | 0.00 12.47 -0.02 21 | 26.04 1.04 12
| 0.00 -9.05 0.37 1 |
1166.7 | 0.00 10.18 -0.02 21 | 21.91 1.04 12
| 0.00 -8.67 1.09 20 |
1458.3 | 0.00 8.75 0.15 13 | 18.90 1.04 12
| 0.00 -3.16 1.09 20 |
1750.0 | 0.00 7.71 0.75 11 | 15.98 1.09 20
| 0.00 -0.74 0.37 1 |
2041.7 | 0.00 8.97 1.04 12 | 14.01 1.09 20
| 0.00 -0.24 -0.74 3 |
2333.3 | 0.00 11.52 1.04 12 | 12.48 1.09 20
| 0.00 -4.46 -0.02 21 |
2625.0 | 0.00 13.26 1.09 20 | -19.25 0.15 13
| 0.00 -9.48 -0.02 21 |
2916.7 | 0.00 16.15 1.09 20 | -21.30 0.15 13
| 0.00 -14.91 -0.02 21 |
3208.3 | 0.00 18.70 1.09 20 | -23.51 0.15 13
| 0.00 -20.68 -0.02 21 |
3500.0 | 0.00 20.96 1.09 20 | -24.60 0.15 13
| 0.00 -26.74 -0.02 21 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 227.67 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 415 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 416
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 29.02 MX = 1.04 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -20.68 MX = 0.15 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 60 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.92 -0.15 3 | 122.43 5.10 11
| 0.00 -104.24 5.10 11 |
116.7 | 0.00 1.85 -0.15 3 | 120.46 5.10 11
| 0.00 -90.07 5.10 11 |
233.3 | 0.00 0.84 0.05 2 | 118.11 5.10 11
| 0.00 -76.16 5.10 11 |
350.0 | 0.00 1.71 -0.15 3 | 115.52 5.10 11
| 0.00 -62.54 5.10 11 |
466.7 | 0.00 0.09 0.01 8 | 112.59 5.10 11
| 0.00 -49.21 5.10 11 |
583.3 | 0.00 0.92 0.05 2 | 109.82 5.10 11
| 0.00 -36.23 5.10 11 |
700.0 | 0.00 1.51 -0.15 3 | 106.41 5.10 11
| 0.00 -23.63 5.10 11 |
816.7 | 0.00 1.44 -0.15 3 | 102.72 5.10 11
| 0.00 -11.40 5.10 11 |
933.3 | 0.00 0.46 4.08 18 | 99.95 5.10 11
| 0.00 -1.31 4.26 15 |
1050.0 | 0.00 11.82 5.10 11 | 96.19 5.10 11
| 0.00 -1.30 0.15 4 |
1166.7 | 0.00 22.86 5.10 11 | 92.23 5.10 11
| 0.00 -1.24 0.15 4 |
1283.3 | 0.00 33.49 5.10 11 | 90.01 5.10 11
| 0.00 -1.17 0.15 4 |
1400.0 | 0.00 43.70 5.10 11 | 85.98 5.10 11
| 0.00 -1.10 0.15 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 416 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 417
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 711.80 416.07 180.62 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 299.62
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 10-10í 6-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 660.0 mm AWAY FROM START SUPPORT
VY = 107.52 MX = 5.10 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 61 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 125.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 417 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 418
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.39 9.56 20 | -112.28 14.03 12
| 0.00 -27.09 12.43 13 |
10.4 | 0.00 9.28 0.66 1 | -112.31 14.03 12
| 0.00 -17.51 13.12 14 |
20.8 | 0.00 4.06 9.56 20 | -112.35 14.03 12
| 0.00 -20.22 16.54 11 |
31.3 | 0.00 2.90 9.56 20 | -112.38 14.03 12
| 0.00 -20.80 16.54 11 |
41.7 | 0.00 1.73 9.56 20 | -112.42 14.03 12
| 0.00 -21.38 16.54 11 |
52.1 | 0.00 0.56 9.56 20 | -112.45 14.03 12
| 0.00 -20.58 13.12 14 |
62.5 | 0.00 6.34 0.66 1 | -112.49 14.03 12
| 0.00 -21.35 13.12 14 |
72.9 | 0.00 3.02 0.09 4 | -112.54 14.03 12
| 0.00 -23.12 16.54 11 |
83.3 | 0.00 3.27 0.09 4 | -112.57 14.03 12
| 0.00 -25.16 12.43 13 |
93.8 | 0.00 4.58 0.66 1 | -112.61 14.03 12
| 0.00 -24.29 16.54 11 |
104.2 | 0.00 3.99 0.66 1 | -112.66 14.03 12
| 0.00 -24.87 16.54 11 |
114.6 | 0.00 3.40 0.66 1 | -112.69 14.03 12
| 0.00 -25.46 16.54 11 |
125.0 | 0.00 4.29 0.09 4 | -112.74 14.03 12
| 0.00 -26.04 16.54 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 272.36 275.12 244.85 296.17 306.79
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 4-10í 4-10í 4-10í 4-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 110 mm c/c @ 110 mm c/c @ 110 mm c/c @ 110 mm c/c @ 110 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -206.59 MX = 14.03 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 418 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 419
============================================================================
B E A M N O. 62 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.31 0.30 1 | 37.48 -0.66 11
| 0.00 -5.87 -0.89 13 |
262.5 | 0.00 3.85 -0.66 11 | 32.61 -0.66 11
| 0.00 -1.25 -0.30 2 |
525.0 | 0.00 11.60 -0.66 11 | 25.83 -0.66 11
| 0.00 -1.18 -0.30 2 |
787.5 | 0.00 17.54 -0.66 11 | 18.85 -0.66 11
| 0.00 -1.12 -0.30 2 |
1050.0 | 0.00 21.44 -0.66 11 | 11.18 -0.66 11
| 0.00 -1.05 -0.30 2 |
1312.5 | 0.00 18.79 -0.54 15 | 1.01 -0.89 13
| 0.00 -0.99 -0.30 2 |
1575.0 | 0.00 22.25 -0.66 11 | -7.81 -0.66 11
| 0.00 -0.93 -0.30 2 |
1837.5 | 0.00 18.97 -0.66 11 | -16.52 -0.66 11
| 0.00 -0.86 -0.30 2 |
2100.0 | 0.00 13.23 -0.66 11 | -26.81 -0.66 11
| 0.00 -0.80 -0.30 2 |
2362.5 | 0.00 5.24 -0.66 11 | -34.47 -0.66 11
| 0.00 -0.73 -0.30 2 |
2625.0 | 0.00 0.67 0.30 1 | -41.45 -0.66 11
| 0.00 -4.65 -0.89 13 |
2887.5 | 0.00 0.61 0.30 1 | -48.23 -0.66 11
| 0.00 -16.66 -0.66 11 |
3150.0 | 0.00 0.54 0.30 1 | -53.10 -0.66 11
| 0.00 -29.97 -0.66 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 419 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 420
============================================================================
B E A M N O. 63 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.78 -0.24 1 | 50.60 1.73 11
| 0.00 -30.18 1.73 11 |
258.3 | 0.00 1.47 -0.24 1 | 45.80 1.73 11
| 0.00 -17.71 1.73 11 |
516.7 | 0.00 1.17 -0.24 1 | 39.13 1.73 11
| 0.00 -6.72 1.68 13 |
775.0 | 0.00 2.66 1.73 11 | 32.35 1.73 11
| 0.00 -0.86 0.24 2 |
1033.3 | 0.00 10.00 1.73 11 | 24.83 1.73 11
| 0.00 -0.04 0.02 8 |
1291.7 | 0.00 15.16 1.73 11 | 14.78 1.73 11
| 0.00 -0.27 0.24 3 |
1550.0 | 0.00 17.96 1.73 11 | 6.24 1.73 11
| 0.00 -0.06 -0.24 1 |
1808.3 | 0.00 18.39 1.73 11 | -2.29 1.73 11
| 0.00 -0.37 -0.24 1 |
2066.7 | 0.00 16.45 1.73 11 | -12.34 1.73 11
| 0.00 -0.00 -0.24 4 |
2325.0 | 0.00 12.34 1.73 11 | -19.86 1.73 11
| 0.00 -0.99 -0.24 1 |
2583.3 | 0.00 6.56 1.68 13 | -26.65 1.73 11
| 0.00 -1.30 -0.24 1 |
2841.7 | 0.00 1.59 1.26 21 | -33.32 1.73 11
| 0.00 -3.19 1.10 12 |
3100.0 | 0.00 1.91 0.24 2 | -38.12 1.73 11
| 0.00 -10.83 1.73 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 186.92 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 420 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 421
============================================================================
B E A M N O. 64 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.02 0.20 1 | 35.72 4.69 11
| 0.00 -6.63 4.69 11 |
262.5 | 0.00 1.92 4.69 11 | 29.43 4.69 11
| 0.00 -0.02 0.43 6 |
525.0 | 0.00 8.71 4.69 11 | 21.92 4.69 11
| 0.00 -0.00 -0.20 2 |
787.5 | 0.00 13.54 4.69 11 | 14.58 4.69 11
| 0.00 -0.00 -0.02 8 |
1050.0 | 0.00 13.04 4.00 12 | 6.89 4.69 11
| 0.00 -0.01 0.20 1 |
1312.5 | 0.00 16.82 4.69 11 | -3.41 4.69 11
| 0.00 -0.02 0.20 1 |
1575.0 | 0.00 11.90 3.82 14 | -12.14 4.69 11
| 0.00 -0.03 0.20 1 |
1837.5 | 0.00 8.31 4.00 12 | -20.88 4.69 11
| 0.00 -0.03 0.20 1 |
2100.0 | 0.00 3.56 4.69 11 | -31.18 4.69 11
| 0.00 -0.04 0.20 1 |
2362.5 | 0.00 0.05 -0.20 2 | -38.87 4.69 11
| 0.00 -5.58 4.69 11 |
2625.0 | 0.00 0.06 -0.20 2 | -46.21 4.69 11
| 0.00 -16.80 4.69 11 |
2887.5 | 0.00 0.06 -0.20 2 | -53.72 4.69 11
| 0.00 -29.96 4.69 11 |
3150.0 | 0.00 0.07 -0.20 2 | -60.01 4.69 11
| 0.00 -44.89 4.69 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 302.76
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 421 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 422
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 18.17 MX = 4.69 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 65 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.51 -0.28 1 | 50.74 -1.04 11
| 0.00 -41.78 -0.49 13 |
258.3 | 0.00 11.58 -0.28 1 | 44.55 -1.04 11
| 0.00 -23.06 -0.49 14 |
516.7 | 0.00 9.81 -0.94 20 | 37.18 -1.04 11
| 0.00 -18.80 -0.49 13 |
775.0 | 0.00 11.39 -0.94 20 | 29.98 -1.04 11
| 0.00 -9.51 -0.49 13 |
1033.3 | 0.00 11.90 -0.94 20 | 26.94 -0.49 13
| 0.00 -5.77 0.28 2 |
1291.7 | 0.00 11.07 -1.17 15 | 18.88 -0.49 13
| 0.00 -3.83 0.28 2 |
1550.0 | 0.00 12.76 -1.17 12 | -9.36 -0.94 20
| 0.00 -1.89 0.28 2 |
1808.3 | 0.00 12.90 -1.04 11 | -12.80 -1.17 12
| 0.00 -0.17 -0.28 4 |
2066.7 | 0.00 10.33 -1.04 11 | -20.86 -1.17 12
| 0.00 -1.98 -0.28 1 |
2325.0 | 0.00 9.16 -0.49 13 | -26.89 -1.17 12
| 0.00 -3.11 -0.94 20 |
2583.3 | 0.00 8.03 -0.08 21 | -32.65 -1.17 12
| 0.00 -9.53 -0.94 20 |
2841.7 | 0.00 7.79 0.28 2 | -38.55 -1.17 12
| 0.00 -17.20 -1.17 12 |
3100.0 | 0.00 9.73 0.28 2 | -43.50 -1.17 12
| 0.00 -27.80 -1.17 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 242.62 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 422 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 423
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 33.19 MX = -1.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -32.12 MX = -1.17 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 66 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.81 0.32 3 | 111.90 -6.44 11
| 0.00 -89.78 -6.44 11 |
116.7 | 0.00 2.77 0.62 2 | 109.15 -6.44 11
| 0.00 -64.83 -5.89 12 |
233.3 | 0.00 9.75 0.32 3 | 106.15 -6.44 11
| 0.00 -63.17 -5.54 15 |
350.0 | 0.00 2.42 0.62 2 | 103.19 -6.44 11
| 0.00 -52.11 -6.44 11 |
466.7 | 0.00 8.70 0.32 3 | 100.16 -6.44 11
| 0.00 -42.64 -5.54 15 |
583.3 | 0.00 2.07 0.62 2 | 96.62 -6.44 11
| 0.00 -32.82 -5.54 15 |
700.0 | 0.00 7.64 0.32 3 | 93.38 -6.44 11
| 0.00 -23.31 -5.54 15 |
816.7 | 0.00 2.95 -4.76 14 | 90.15 -6.44 11
| 0.00 -14.03 -3.09 23 |
933.3 | 0.00 11.79 -2.12 22 | 86.60 -6.44 11
| 0.00 -6.58 -0.32 4 |
1050.0 | 0.00 17.87 -4.76 14 | 83.57 -6.44 11
| 0.00 -2.11 -3.09 23 |
1166.7 | 0.00 22.83 -6.44 11 | 80.61 -6.44 11
| 0.00 -5.53 -0.32 4 |
1283.3 | 0.00 32.06 -6.44 11 | 77.62 -6.44 11
| 0.00 -5.00 -0.32 4 |
1400.0 | 0.00 40.95 -6.44 11 | 74.86 -6.44 11
| 0.00 -4.47 -0.32 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 423 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 424
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 618.08 369.66 185.32 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 296.35
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 665.0 mm AWAY FROM START SUPPORT
VY = 94.35 MX = -6.44 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 67 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 424 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 425
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.08 -0.08 1 | 50.18 0.28 11
| 0.00 -25.48 0.28 11 |
285.4 | 0.00 0.01 -0.01 7 | 43.34 0.28 11
| 0.00 -12.13 0.28 11 |
570.8 | 0.00 0.08 -0.08 1 | 35.23 0.28 11
| 0.00 -0.91 0.28 11 |
856.3 | 0.00 8.01 0.28 11 | 27.30 0.28 11
| 0.00 -0.08 0.08 2 |
1141.7 | 0.00 11.44 0.32 13 | 16.99 0.28 11
| 0.00 -0.04 0.03 3 |
1427.1 | 0.00 18.04 0.28 11 | 7.96 0.28 11
| 0.00 -0.00 0.00 9 |
1712.5 | 0.00 18.74 0.28 11 | -2.89 0.28 11
| 0.00 -0.07 0.08 2 |
1997.9 | 0.00 16.39 0.28 11 | -13.73 0.28 11
| 0.00 -0.07 0.08 2 |
2283.3 | 0.00 8.92 0.27 14 | -22.76 0.28 11
| 0.00 -0.02 -0.03 4 |
2568.8 | 0.00 3.07 0.28 11 | -33.07 0.28 11
| 0.00 -0.06 0.08 2 |
2854.2 | 0.00 0.06 -0.08 1 | -41.00 0.28 11
| 0.00 -7.50 0.28 11 |
3139.6 | 0.00 0.06 -0.08 1 | -49.11 0.28 11
| 0.00 -20.37 0.28 11 |
3425.0 | 0.00 0.06 -0.08 1 | -55.95 0.28 11
| 0.00 -35.36 0.28 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 203.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 36.08 MX = 0.28 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 425 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 426
============================================================================
B E A M N O. 68 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3750.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.09 -0.63 2 | 59.19 -0.86 11
| 0.00 -38.24 0.06 12 |
312.5 | 0.00 2.60 -1.39 21 | 51.70 -0.86 11
| 0.00 -22.53 0.06 12 |
625.0 | 0.00 5.54 -1.44 13 | 42.74 -0.86 11
| 0.00 -8.88 0.06 12 |
937.5 | 0.00 13.26 -1.44 13 | 34.00 -0.86 11
| 0.00 -4.47 0.63 1 |
1250.0 | 0.00 15.28 -0.76 17 | 22.53 -0.86 11
| 0.00 -1.34 0.34 4 |
1562.5 | 0.00 24.17 -0.86 11 | 12.53 -0.86 11
| 0.00 -1.39 0.63 1 |
1875.0 | 0.00 20.59 -1.44 13 | -7.36 -1.39 21
| 0.00 -0.15 -0.63 2 |
2187.5 | 0.00 20.23 -0.28 15 | -16.29 -1.44 13
| 0.00 -1.69 -0.63 2 |
2500.0 | 0.00 18.42 -0.86 11 | -24.29 -1.44 13
| 0.00 -3.23 -0.63 2 |
2812.5 | 0.00 13.28 0.06 12 | -33.47 -1.44 13
| 0.00 -4.77 -0.63 2 |
3125.0 | 0.00 8.44 0.50 20 | -40.46 -1.44 13
| 0.00 -10.49 -1.39 21 |
3437.5 | 0.00 7.85 0.63 1 | -52.15 -0.86 11
| 0.00 -23.45 -1.44 13 |
3750.0 | 0.00 9.39 0.63 1 | -59.64 -0.86 11
| 0.00 -39.27 -1.44 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 217.54 178.50 178.50 178.50 237.06
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 426 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 427
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 45.12 MX = -0.86 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -39.55 MX = -1.44 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 69 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.15 -0.27 1 | 46.16 0.73 11
| 0.00 -24.18 0.90 13 |
287.5 | 0.00 7.31 -0.27 1 | 39.08 0.90 13
| 0.00 -12.15 0.90 13 |
575.0 | 0.00 11.30 0.26 12 | 32.38 0.90 13
| 0.00 -4.88 0.76 21 |
862.5 | 0.00 15.30 0.26 12 | 25.85 0.90 13
| 0.00 -3.63 0.27 2 |
1150.0 | 0.00 18.92 0.73 11 | 18.98 0.90 13
| 0.00 -0.36 0.11 3 |
1437.5 | 0.00 21.36 0.73 11 | 10.61 0.76 21
| 0.00 -0.01 -0.03 7 |
1725.0 | 0.00 18.87 0.90 13 | -13.63 0.26 12
| 0.00 -1.89 -0.27 1 |
2012.5 | 0.00 18.14 0.90 13 | -21.50 0.26 12
| 0.00 -3.73 -0.27 1 |
2300.0 | 0.00 14.98 0.90 13 | -28.99 0.73 11
| 0.00 -5.57 -0.27 1 |
2587.5 | 0.00 11.41 0.76 21 | -37.58 0.73 11
| 0.00 -10.82 -0.03 20 |
2875.0 | 0.00 9.25 0.27 2 | -45.74 0.73 11
| 0.00 -20.04 0.26 12 |
3162.5 | 0.00 11.09 0.27 2 | -54.12 0.73 11
| 0.00 -33.78 0.26 12 |
3450.0 | 0.00 12.93 0.27 2 | -61.03 0.73 11
| 0.00 -49.23 0.26 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 284.92
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 427 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 428
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 33.18 MX = 0.90 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 70 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.75 -0.55 2 | 99.44 2.84 11
| 0.00 -92.42 2.84 11 |
208.3 | 0.00 1.64 -0.55 2 | 94.48 2.84 11
| 0.00 -59.74 2.94 12 |
416.7 | 0.00 0.14 -0.05 8 | 88.74 2.84 11
| 0.00 -44.31 2.94 12 |
625.0 | 0.00 0.13 -0.05 8 | 83.12 2.84 11
| 0.00 -35.18 2.84 11 |
833.3 | 0.00 1.29 -0.55 2 | 77.28 2.84 11
| 0.00 -18.50 2.84 11 |
1041.7 | 0.00 1.17 -0.55 2 | 69.78 2.84 11
| 0.00 -3.93 2.94 12 |
1250.0 | 0.00 10.75 2.84 11 | 63.28 2.84 11
| 0.00 -1.06 0.55 1 |
1458.3 | 0.00 23.21 2.84 11 | 56.78 2.84 11
| 0.00 -0.94 0.55 1 |
1666.7 | 0.00 34.24 2.84 11 | 49.29 2.84 11
| 0.00 -0.82 0.55 1 |
1875.0 | 0.00 43.92 2.84 11 | 43.44 2.84 11
| 0.00 -0.71 0.55 1 |
2083.3 | 0.00 52.36 2.84 11 | 37.82 2.84 11
| 0.00 -0.59 0.55 1 |
2291.7 | 0.00 59.62 2.84 11 | 32.08 2.84 11
| 0.00 -0.48 0.55 1 |
2500.0 | 0.00 65.78 2.84 11 | 27.12 2.84 11
| 0.00 -0.36 0.55 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 428 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 429
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 591.85 228.24 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 279.23 414.24
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 542.0 mm AWAY FROM START SUPPORT
VY = 85.50 MX = 2.84 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 71 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 429 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 430
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.10 -4.21 11 | -104.08 -4.21 11
| 0.00 -0.80 1.19 2 |
91.7 | 0.00 3.14 -4.80 12 | -106.24 -4.21 11
| 0.00 -0.98 1.19 2 |
183.3 | 0.00 1.15 -1.19 1 | -108.54 -4.21 11
| 0.00 -7.38 -4.21 11 |
275.0 | 0.00 1.33 -1.19 1 | -110.83 -4.21 11
| 0.00 -17.43 -4.21 11 |
366.7 | 0.00 1.51 -1.19 1 | -113.15 -4.21 11
| 0.00 -27.70 -4.21 11 |
458.3 | 0.00 0.31 -0.10 4 | -115.80 -4.21 11
| 0.00 -38.19 -4.21 11 |
550.0 | 0.00 1.86 -1.19 1 | -118.26 -4.21 11
| 0.00 -48.92 -4.21 11 |
641.7 | 0.00 2.04 -1.19 1 | -120.71 -4.21 11
| 0.00 -59.87 -4.21 11 |
733.3 | 0.00 2.22 -1.19 1 | -123.36 -4.21 11
| 0.00 -71.06 -4.21 11 |
825.0 | 0.00 2.40 -1.19 1 | -125.69 -4.21 11
| 0.00 -82.47 -4.21 11 |
916.7 | 0.00 2.57 -1.19 1 | -127.97 -4.21 11
| 0.00 -94.10 -4.21 11 |
1008.3 | 0.00 2.75 -1.19 1 | -130.28 -4.21 11
| 0.00 -105.94 -4.21 11 |
1100.0 | 0.00 2.93 -1.19 1 | -132.44 -4.21 11
| 0.00 -117.98 -4.21 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 325.04 540.02 789.07
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 5-12í 7-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 665.1 mm AWAY FROM END SUPPORT
VY = -115.18 MX = -4.21 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 430 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 431
============================================================================
B E A M N O. 72 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 15.34 -0.01 1 | 50.74 0.59 11
| 0.00 -39.77 0.49 13 |
264.6 | 0.00 13.22 -0.01 1 | 45.12 0.49 13
| 0.00 -27.78 0.32 21 |
529.2 | 0.00 14.45 0.28 20 | 39.05 0.49 13
| 0.00 -18.86 0.32 21 |
793.8 | 0.00 15.93 0.28 20 | 33.13 0.49 13
| 0.00 -11.03 0.32 21 |
1058.3 | 0.00 16.28 0.28 20 | 26.92 0.49 13
| 0.00 -6.87 0.01 2 |
1322.9 | 0.00 18.96 0.46 12 | 18.58 0.49 13
| 0.00 -4.75 0.01 2 |
1587.5 | 0.00 17.94 0.46 12 | 13.67 0.32 21
| 0.00 -2.63 0.01 2 |
1852.1 | 0.00 14.90 0.46 12 | -14.74 0.46 12
| 0.00 -0.07 -0.78 3 |
2116.7 | 0.00 13.70 0.49 13 | -23.07 0.46 12
| 0.00 -0.13 0.00 7 |
2381.2 | 0.00 11.89 0.49 13 | -29.28 0.46 12
| 0.00 -3.72 -0.01 1 |
2645.8 | 0.00 10.07 0.32 21 | -35.20 0.46 12
| 0.00 -7.43 0.28 20 |
2910.4 | 0.00 8.38 0.32 21 | -41.27 0.46 12
| 0.00 -15.75 0.46 12 |
3175.0 | 0.00 10.07 0.01 2 | -45.93 0.59 11
| 0.00 -27.34 0.46 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 230.71 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 431 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 432
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -34.96 MX = 0.46 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 73 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.20 -0.15 1 | 52.30 0.93 11
| 0.00 -13.16 0.93 11 |
291.7 | 0.00 1.01 0.92 13 | 46.95 0.93 11
| 0.00 -0.10 -0.17 4 |
583.3 | 0.00 11.32 0.95 14 | 39.14 0.93 11
| 0.00 -0.14 -0.17 4 |
875.0 | 0.00 24.26 0.93 11 | 31.28 0.93 11
| 0.00 -0.26 -0.15 1 |
1166.7 | 0.00 32.02 0.93 11 | 20.60 0.93 11
| 0.00 -0.41 -0.15 1 |
1458.3 | 0.00 30.13 0.92 13 | 11.32 0.93 11
| 0.00 -0.56 -0.15 1 |
1750.0 | 0.00 38.63 0.93 11 | 1.18 0.92 13
| 0.00 -0.28 -0.17 4 |
2041.7 | 0.00 30.82 0.92 13 | -9.93 0.93 11
| 0.00 -0.86 -0.15 1 |
2333.3 | 0.00 32.83 0.93 11 | -19.21 0.93 11
| 0.00 -0.35 -0.17 4 |
2625.0 | 0.00 25.47 0.93 11 | -29.89 0.93 11
| 0.00 -1.16 -0.15 1 |
2916.7 | 0.00 15.56 0.93 11 | -37.75 0.93 11
| 0.00 -1.31 -0.15 1 |
3208.3 | 0.00 4.43 0.92 13 | -45.57 0.93 11
| 0.00 -1.46 -0.15 1 |
3500.0 | 0.00 1.61 0.15 2 | -50.92 0.93 11
| 0.00 -10.73 0.93 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 228.25 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 432 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 433
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 74 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 4.27 -2.09 11 | 31.66 -2.09 11
| 0.00 -0.33 0.39 2 |
289.6 | 0.00 10.37 -2.14 12 | 26.17 -2.09 11
| 0.00 -0.19 0.39 2 |
579.2 | 0.00 19.25 -2.09 11 | 18.71 -2.09 11
| 0.00 -0.05 0.39 2 |
868.7 | 0.00 23.58 -2.09 11 | 10.19 -2.09 11
| 0.00 -0.08 -0.39 1 |
1158.3 | 0.00 25.19 -2.09 11 | 1.22 -2.09 11
| 0.00 -0.02 -0.04 7 |
1447.9 | 0.00 23.82 -2.09 11 | -9.93 -2.09 11
| 0.00 -0.36 -0.39 1 |
1737.5 | 0.00 19.42 -2.09 11 | -20.47 -2.09 11
| 0.00 -0.50 -0.39 1 |
2027.1 | 0.00 9.68 -1.61 14 | -31.00 -2.09 11
| 0.00 -0.64 -0.39 1 |
2316.7 | 0.00 1.49 -2.09 11 | -42.16 -2.09 11
| 0.00 -1.69 -1.73 20 |
2606.2 | 0.00 0.92 0.39 2 | -51.12 -2.09 11
| 0.00 -11.98 -2.09 11 |
2895.8 | 0.00 1.05 0.39 2 | -59.64 -2.09 11
| 0.00 -28.16 -2.09 11 |
3185.4 | 0.00 1.19 0.39 2 | -67.10 -2.09 11
| 0.00 -46.59 -2.09 11 |
3475.0 | 0.00 1.33 0.39 2 | -72.59 -2.09 11
| 0.00 -66.85 -2.09 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 413.09
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 433 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 434
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -62.34 MX = -2.09 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 75 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.22 -1.22 1 | -56.95 -5.28 11
| 0.00 -0.88 -5.69 12 |
27.1 | 0.00 0.25 -1.22 1 | -57.05 -5.28 11
| 0.00 -2.97 -5.28 11 |
54.2 | 0.00 0.13 -0.32 4 | -57.17 -5.28 11
| 0.00 -3.28 -5.69 12 |
81.2 | 0.00 0.02 -0.12 7 | -57.30 -5.28 11
| 0.00 -6.07 -5.28 11 |
108.3 | 0.00 0.14 -0.32 4 | -57.44 -5.28 11
| 0.00 -7.63 -5.28 11 |
135.4 | 0.00 0.03 -0.12 7 | -57.55 -5.28 11
| 0.00 -9.18 -5.28 11 |
162.5 | 0.00 0.15 -0.32 4 | -57.71 -5.28 11
| 0.00 -10.74 -5.28 11 |
189.6 | 0.00 0.42 -1.22 1 | -57.89 -5.28 11
| 0.00 -12.31 -5.28 11 |
216.7 | 0.00 0.45 -1.22 1 | -57.99 -5.28 11
| 0.00 -13.88 -5.28 11 |
243.8 | 0.00 0.47 -1.22 1 | -58.18 -5.28 11
| 0.00 -15.45 -5.28 11 |
270.8 | 0.00 0.50 -1.22 1 | -58.39 -5.28 11
| 0.00 -17.03 -5.28 11 |
297.9 | 0.00 0.53 -1.22 1 | -58.50 -5.28 11
| 0.00 -18.61 -5.28 11 |
325.0 | 0.00 0.56 -1.22 1 | -58.72 -5.28 11
| 0.00 -20.20 -5.28 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 434 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 435
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 76 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.04 0.06 1 | 57.49 -0.23 11
| 0.00 -40.35 -0.26 13 |
285.4 | 0.00 0.54 0.01 7 | 52.42 -0.23 11
| 0.00 -26.56 -0.26 13 |
570.8 | 0.00 4.97 0.06 1 | 45.00 -0.23 11
| 0.00 -14.22 -0.26 13 |
856.3 | 0.00 6.72 -0.02 20 | 36.54 -0.23 11
| 0.00 -5.10 -0.19 21 |
1141.7 | 0.00 11.91 -0.12 12 | 26.47 -0.23 11
| 0.00 -2.91 -0.06 2 |
1427.1 | 0.00 16.58 -0.23 11 | 16.40 -0.26 13
| 0.00 -0.17 -0.01 8 |
1712.5 | 0.00 16.39 -0.12 12 | 6.74 -0.26 13
| 0.00 -0.12 0.02 3 |
1997.9 | 0.00 18.29 -0.23 11 | -11.61 -0.12 12
| 0.00 -0.10 0.02 3 |
2283.3 | 0.00 13.94 -0.23 11 | -20.48 -0.23 11
| 0.00 -1.22 0.06 1 |
2568.8 | 0.00 7.94 -0.26 13 | -30.55 -0.23 11
| 0.00 -2.25 0.06 1 |
2854.2 | 0.00 3.29 -0.19 21 | -39.01 -0.23 11
| 0.00 -6.72 -0.12 12 |
3139.6 | 0.00 4.32 -0.06 2 | -46.43 -0.23 11
| 0.00 -17.70 -0.12 12 |
3425.0 | 0.00 5.35 -0.06 2 | -51.50 -0.23 11
| 0.00 -30.11 -0.12 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 435 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 436
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 231.82 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -36.56 MX = -0.23 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 77 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 200.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 436 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 437
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 39.54 2.29 23 | -473.52 5.34 15
| 0.00 -53.85 11.20 13 |
16.7 | 0.00 32.40 2.29 23 | -473.58 5.34 15
| 0.00 -54.90 11.20 13 |
33.3 | 0.00 25.25 2.29 23 | -473.63 5.34 15
| 0.00 -51.13 9.61 21 |
50.0 | 0.00 22.32 -3.27 1 | -473.69 5.34 15
| 0.00 -57.01 11.20 13 |
66.7 | 0.00 19.47 -3.27 1 | -473.75 5.34 15
| 0.00 -58.06 11.20 13 |
83.3 | 0.00 17.19 -1.62 4 | -473.81 5.34 15
| 0.00 -59.12 11.20 13 |
100.0 | 0.00 14.33 -1.62 4 | -473.88 5.34 15
| 0.00 -60.17 11.20 13 |
116.7 | 0.00 11.47 -1.62 4 | -473.95 5.34 15
| 0.00 -61.85 9.22 14 |
133.3 | 0.00 8.11 -3.27 1 | -474.00 5.34 15
| 0.00 -62.29 11.20 13 |
150.0 | 0.00 5.26 -3.27 1 | -474.08 5.34 15
| 0.00 -71.29 9.10 11 |
166.7 | 0.00 2.42 -3.27 1 | -474.16 5.34 15
| 0.00 -76.88 9.10 11 |
183.3 | 0.00 0.42 3.27 2 | -474.22 5.34 15
| 0.00 -82.47 9.10 11 |
200.0 | 0.00 3.26 3.27 2 | -474.30 5.34 15
| 0.00 -88.06 9.10 11 |
============================================================================
============================================================================
B E A M N O. 80 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.49 0.81 20 | 37.21 1.77 11
| 0.00 -20.08 1.46 13 |
262.5 | 0.00 10.09 0.81 20 | 32.17 1.77 11
| 0.00 -11.26 1.46 13 |
525.0 | 0.00 11.32 1.37 12 | 25.76 1.77 11
| 0.00 -6.78 0.93 21 |
787.5 | 0.00 14.53 1.37 12 | 20.79 1.46 13
| 0.00 -4.97 0.04 2 |
1050.0 | 0.00 16.21 1.37 12 | 14.87 1.46 13
| 0.00 -3.72 0.04 2 |
1312.5 | 0.00 16.71 1.77 11 | 8.96 1.46 13
| 0.00 -2.47 0.04 2 |
1575.0 | 0.00 14.90 1.37 12 | -8.41 1.37 12
| 0.00 -0.15 0.00 8 |
1837.5 | 0.00 14.95 1.77 11 | -14.33 1.37 12
| 0.00 -0.04 -0.10 3 |
2100.0 | 0.00 10.48 1.46 13 | -18.15 1.77 11
| 0.00 -0.01 0.01 10 |
2362.5 | 0.00 7.39 1.46 13 | -25.54 1.77 11
| 0.00 -1.40 0.81 20 |
2625.0 | 0.00 4.33 0.93 21 | -32.48 1.77 11
| 0.00 -6.34 1.37 12 |
2887.5 | 0.00 5.05 0.04 2 | -38.88 1.77 11
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 437 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 438
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 25.80 MX = 1.77 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -32.11 MX = 1.77 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 82 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 438 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 439
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.65 0.04 2 | 52.43 -3.19 11
| 0.00 -25.60 -3.19 11 |
289.6 | 0.00 0.47 0.04 2 | 46.98 -3.19 11
| 0.00 -11.17 -3.19 11 |
579.2 | 0.00 1.43 -3.19 11 | 39.19 -3.19 11
| 0.00 -0.28 -0.04 1 |
868.7 | 0.00 11.75 -3.19 11 | 30.72 -3.19 11
| 0.00 -0.10 -0.04 1 |
1158.3 | 0.00 19.40 -3.19 11 | 22.61 -3.19 11
| 0.00 -0.08 0.04 2 |
1447.9 | 0.00 19.41 -2.60 12 | 8.91 -3.19 11
| 0.00 -0.26 0.04 2 |
1737.5 | 0.00 24.91 -3.19 11 | -2.48 -3.19 11
| 0.00 -0.44 0.04 2 |
2027.1 | 0.00 22.37 -3.19 11 | -15.01 -3.19 11
| 0.00 -0.63 0.04 2 |
2316.7 | 0.00 16.29 -3.19 11 | -28.72 -3.19 11
| 0.00 -0.81 0.04 2 |
2606.2 | 0.00 6.79 -3.19 11 | -37.03 -3.19 11
| 0.00 -0.99 0.04 2 |
2895.8 | 0.00 1.17 -0.04 1 | -47.29 -3.19 11
| 0.00 -5.60 -3.19 11 |
3185.4 | 0.00 1.35 -0.04 1 | -54.60 -3.19 11
| 0.00 -20.45 -3.19 11 |
3475.0 | 0.00 1.53 -0.04 1 | -61.33 -3.19 11
| 0.00 -37.36 -3.19 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 242.70
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 40.33 MX = -3.19 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 439 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 440
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -45.12 MX = -3.19 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 84 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 69.39 -1.08 11 | -100.84 -1.08 11
| 0.00 -0.78 0.67 1 |
122.9 | 0.00 56.86 -1.08 11 | -102.96 -1.08 11
| 0.00 -0.70 0.67 1 |
245.8 | 0.00 35.98 -1.67 13 | -105.61 -1.08 11
| 0.00 -0.61 0.67 1 |
368.8 | 0.00 30.92 -1.08 11 | -108.18 -1.08 11
| 0.00 -0.53 0.67 1 |
491.7 | 0.00 14.49 -1.67 13 | -110.91 -1.08 11
| 0.00 -0.44 0.67 1 |
614.6 | 0.00 3.30 -1.67 13 | -114.78 -1.08 11
| 0.00 -0.36 0.67 1 |
737.5 | 0.00 0.28 -0.67 2 | -117.97 -1.08 11
| 0.00 -8.23 -1.67 13 |
860.4 | 0.00 0.19 -0.67 2 | -121.15 -1.08 11
| 0.00 -25.41 -1.08 11 |
983.3 | 0.00 0.11 -0.67 2 | -125.03 -1.08 11
| 0.00 -40.55 -1.08 11 |
1106.3 | 0.00 0.02 -0.67 2 | -127.75 -1.08 11
| 0.00 -56.08 -1.08 11 |
1229.2 | 0.00 0.06 0.67 1 | -130.33 -1.08 11
| 0.00 -71.95 -1.08 11 |
1352.1 | 0.00 0.15 0.67 1 | -132.98 -1.08 11
| 0.00 -88.14 -1.08 11 |
1475.0 | 0.00 0.23 0.67 1 | -135.09 -1.08 11
| 0.00 -104.62 -1.08 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 335.56 651.98
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 418.64 184.94 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 440 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 441
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 6-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -119.56 MX = -1.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 86 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.31 0.41 2 | 48.12 2.00 11
| 0.00 -40.09 1.11 12 |
258.3 | 0.00 6.45 1.55 21 | 43.33 2.00 11
| 0.00 -28.56 1.11 12 |
516.7 | 0.00 8.87 0.41 2 | 36.75 2.00 11
| 0.00 -17.86 0.32 20 |
775.0 | 0.00 10.17 1.55 21 | 30.03 2.00 11
| 0.00 -11.27 0.32 20 |
1033.3 | 0.00 11.30 2.09 13 | 22.61 2.00 11
| 0.00 -5.61 0.32 20 |
1291.7 | 0.00 12.81 2.09 13 | 12.82 2.00 11
| 0.00 -3.70 -0.41 1 |
1550.0 | 0.00 12.65 2.00 11 | -4.98 2.09 13
| 0.00 -0.24 -0.17 4 |
1808.3 | 0.00 10.24 2.09 13 | -12.22 2.09 13
| 0.00 -0.26 -0.41 1 |
2066.7 | 0.00 9.66 1.11 12 | -20.05 2.09 13
| 0.00 -0.20 0.17 3 |
2325.0 | 0.00 7.91 1.11 12 | -25.99 2.09 13
| 0.00 -2.57 1.55 21 |
2583.3 | 0.00 6.46 0.32 20 | -31.36 2.09 13
| 0.00 -8.24 1.55 21 |
2841.7 | 0.00 6.62 -0.41 1 | -36.63 2.09 13
| 0.00 -16.01 2.09 13 |
3100.0 | 0.00 8.34 -0.41 1 | -40.46 2.09 13
| 0.00 -25.98 2.09 13 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 441 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 442
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 238.62 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 33.20 MX = 2.00 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -30.89 MX = 2.09 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 87 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 442 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 443
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.28 0.05 2 | 43.63 0.44 11
| 0.00 -42.08 0.29 12 |
250.0 | 0.00 0.64 0.04 8 | 39.33 0.44 11
| 0.00 -27.39 0.51 15 |
500.0 | 0.00 5.44 0.05 2 | 33.92 0.44 11
| 0.00 -23.01 0.29 12 |
750.0 | 0.00 4.02 0.05 2 | 29.75 0.29 12
| 0.00 -12.33 0.51 15 |
1000.0 | 0.00 2.59 0.05 2 | 25.30 0.29 12
| 0.00 -8.17 0.29 12 |
1250.0 | 0.00 1.29 0.31 21 | 18.94 0.29 12
| 0.00 -1.92 0.51 15 |
1500.0 | 0.00 1.23 0.51 15 | 13.73 0.29 12
| 0.00 -0.25 0.05 2 |
1750.0 | 0.00 2.82 0.44 11 | 9.48 0.15 20
| 0.00 -1.67 0.05 2 |
2000.0 | 0.00 6.03 0.15 20 | -11.49 0.42 13
| 0.00 -3.25 0.31 21 |
2250.0 | 0.00 7.12 0.15 20 | -15.94 0.42 13
| 0.00 -6.42 0.31 21 |
2500.0 | 0.00 7.46 0.15 20 | -20.15 0.42 13
| 0.00 -10.35 0.31 21 |
2750.0 | 0.00 7.36 -0.05 1 | -24.48 0.42 13
| 0.00 -15.41 0.42 13 |
3000.0 | 0.00 8.78 -0.05 1 | -27.92 0.42 13
| 0.00 -21.96 0.42 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 242.37 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 33.34 MX = 0.44 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 443 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 444
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -19.46 MX = 0.42 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 90 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.55 0.33 2 | 63.49 -9.04 11
| 0.00 -38.95 -9.04 11 |
91.7 | 0.00 2.67 -0.02 3 | 61.95 -9.04 11
| 0.00 -33.20 -9.04 11 |
183.3 | 0.00 2.14 0.33 2 | 60.18 -9.04 11
| 0.00 -27.60 -9.04 11 |
275.0 | 0.00 1.93 0.33 2 | 58.25 -9.04 11
| 0.00 -22.18 -9.04 11 |
366.7 | 0.00 0.16 0.06 8 | 56.11 -9.04 11
| 0.00 -16.93 -9.04 11 |
458.3 | 0.00 1.97 -0.02 3 | 54.08 -9.04 11
| 0.00 -11.87 -9.04 11 |
550.0 | 0.00 1.31 0.33 2 | 51.65 -9.04 11
| 0.00 -7.20 -7.62 12 |
641.7 | 0.00 0.01 -7.26 14 | 49.04 -9.04 11
| 0.00 -2.40 -9.04 11 |
733.3 | 0.00 3.32 -7.26 14 | 47.01 -9.04 11
| 0.00 -0.13 -7.20 15 |
825.0 | 0.00 6.17 -9.04 11 | 44.36 -9.04 11
| 0.00 -1.26 0.02 4 |
916.7 | 0.00 10.13 -9.04 11 | 41.59 -9.04 11
| 0.00 -1.09 0.02 4 |
1008.3 | 0.00 13.86 -9.04 11 | 39.90 -9.04 11
| 0.00 -0.91 0.02 4 |
1100.0 | 0.00 17.37 -9.04 11 | 37.08 -9.04 11
| 0.00 -0.73 0.02 4 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 310.96 210.52 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 182.34
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 444 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 445
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 48.99 MX = -9.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 92 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.00 0.34 2 | 50.21 -0.19 11
| 0.00 -38.10 -0.19 11 |
258.3 | 0.00 0.14 0.34 2 | 45.61 -0.19 11
| 0.00 -20.75 -0.55 12 |
516.7 | 0.00 0.28 0.34 2 | 38.84 -0.19 11
| 0.00 -14.78 -0.19 11 |
775.0 | 0.00 0.42 0.34 2 | 32.37 -0.19 11
| 0.00 -5.56 -0.19 11 |
1033.3 | 0.00 2.01 0.25 13 | 23.61 -0.19 11
| 0.00 -0.71 -0.59 20 |
1291.7 | 0.00 5.99 0.25 13 | 13.54 -0.19 11
| 0.00 -0.69 -0.34 1 |
1550.0 | 0.00 6.92 -0.14 18 | 1.69 -0.55 12
| 0.00 -0.83 -0.34 1 |
1808.3 | 0.00 7.95 -0.19 11 | -6.92 -0.55 12
| 0.00 -0.97 -0.34 1 |
2066.7 | 0.00 4.96 0.25 13 | -19.63 -0.19 11
| 0.00 -1.10 -0.34 1 |
2325.0 | 0.00 1.24 0.34 2 | -28.41 -0.19 11
| 0.00 -2.68 -0.59 20 |
2583.3 | 0.00 1.38 0.34 2 | -35.06 -0.19 11
| 0.00 -9.40 -0.55 12 |
2841.7 | 0.00 1.52 0.34 2 | -42.56 -0.19 11
| 0.00 -19.84 -0.19 11 |
3100.0 | 0.00 1.65 0.34 2 | -48.22 -0.19 11
| 0.00 -31.60 -0.19 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 445 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 446
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 218.48 178.08 178.08 178.08 180.37
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 40.35 MX = -0.19 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -30.75 MX = -0.19 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 94 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 446 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 447
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.21 0.59 21 | 22.91 1.29 11
| 0.00 -3.26 1.15 12 |
208.3 | 0.00 2.25 0.91 13 | 19.19 1.29 11
| 0.00 -0.38 0.02 4 |
416.7 | 0.00 5.23 1.29 11 | 14.40 1.29 11
| 0.00 -0.51 0.10 1 |
625.0 | 0.00 7.69 1.29 11 | 9.41 1.29 11
| 0.00 -0.30 0.10 1 |
833.3 | 0.00 8.97 1.29 11 | 3.89 1.29 11
| 0.00 -0.08 0.10 1 |
1041.7 | 0.00 8.84 1.29 11 | -5.26 1.29 11
| 0.00 -0.13 -0.10 2 |
1250.0 | 0.00 7.16 1.29 11 | -12.35 1.29 11
| 0.00 -0.18 -0.02 3 |
1458.3 | 0.00 3.84 1.29 11 | -19.75 1.29 11
| 0.00 -0.56 -0.10 2 |
1666.7 | 0.00 0.02 1.15 12 | -28.94 1.29 11
| 0.00 -1.39 1.01 14 |
1875.0 | 0.00 0.99 0.10 1 | -34.72 1.29 11
| 0.00 -7.71 1.29 11 |
2083.3 | 0.00 1.20 0.10 1 | -41.16 1.29 11
| 0.00 -15.64 1.29 11 |
2291.7 | 0.00 1.42 0.10 1 | -46.39 1.29 11
| 0.00 -24.79 1.29 11 |
2500.0 | 0.00 1.63 0.10 1 | -51.28 1.29 11
| 0.00 -35.01 1.29 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 210.90
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 11.29 MX = 1.29 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 447 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 448
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -33.48 MX = 1.29 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 95 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.70 0.34 2 | 41.74 -0.43 12
| 0.00 -29.27 -0.43 12 |
245.8 | 0.00 8.88 0.34 2 | 38.24 -0.43 12
| 0.00 -19.44 -0.43 12 |
491.7 | 0.00 9.33 0.51 21 | 33.02 -0.43 12
| 0.00 -11.87 -0.50 20 |
737.5 | 0.00 9.56 0.38 13 | 28.04 -0.43 12
| 0.00 -5.25 -0.34 1 |
983.3 | 0.00 11.36 0.38 13 | 22.58 -0.43 12
| 0.00 -1.11 -0.50 20 |
1229.2 | 0.00 11.49 0.38 13 | 13.81 -0.50 20
| 0.00 -1.62 -0.34 1 |
1475.0 | 0.00 9.71 0.38 13 | -12.25 0.51 21
| 0.00 -0.19 0.34 2 |
1720.8 | 0.00 10.80 -0.43 12 | -18.14 0.38 13
| 0.00 -2.00 0.34 2 |
1966.7 | 0.00 9.51 -0.43 12 | -27.28 0.38 13
| 0.00 -2.84 0.51 21 |
2212.5 | 0.00 8.53 -0.50 20 | -32.74 0.38 13
| 0.00 -8.37 0.51 21 |
2458.3 | 0.00 7.59 -0.50 20 | -37.72 0.38 13
| 0.00 -15.70 0.38 13 |
2704.2 | 0.00 9.26 -0.34 1 | -42.94 0.38 13
| 0.00 -25.67 0.38 13 |
2950.0 | 0.00 11.08 -0.34 1 | -46.44 0.38 13
| 0.00 -36.66 0.38 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 211.86
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 448 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 449
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 32.43 MX = -0.43 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 96 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.14 -0.21 1 | 49.08 0.16 11
| 0.00 -32.94 0.38 13 |
264.6 | 0.00 7.56 -0.21 1 | 44.36 0.16 11
| 0.00 -21.17 0.38 13 |
529.2 | 0.00 6.67 -0.23 20 | 37.01 0.38 13
| 0.00 -11.30 0.39 21 |
793.8 | 0.00 9.11 -0.12 12 | 31.65 0.38 13
| 0.00 -4.78 0.39 21 |
1058.3 | 0.00 11.65 0.16 11 | 24.41 0.38 13
| 0.00 -0.75 0.03 3 |
1322.9 | 0.00 16.03 0.16 11 | 15.91 0.38 13
| 0.00 -1.26 0.21 2 |
1587.5 | 0.00 17.54 0.16 11 | 9.45 0.39 21
| 0.00 -0.31 -0.21 1 |
1852.1 | 0.00 15.14 0.38 13 | -15.71 -0.12 12
| 0.00 -0.39 -0.03 4 |
2116.7 | 0.00 13.58 0.38 13 | -24.22 -0.12 12
| 0.00 -3.46 -0.21 1 |
2381.2 | 0.00 10.23 0.39 21 | -31.45 -0.12 12
| 0.00 -5.04 -0.21 1 |
2645.8 | 0.00 8.71 0.39 21 | -37.08 0.16 11
| 0.00 -11.12 -0.23 20 |
2910.4 | 0.00 8.19 0.21 2 | -44.11 0.16 11
| 0.00 -21.65 -0.12 12 |
3175.0 | 0.00 9.76 0.21 2 | -48.83 0.16 11
| 0.00 -33.38 -0.12 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 449 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 450
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 190.06 178.08 178.08 178.08 190.07
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 35.17 MX = 0.38 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -33.92 MX = -0.12 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 98 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 450 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 451
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 15.91 -0.38 2 | 31.81 0.68 12
| 0.00 -38.87 0.68 12 |
291.7 | 0.00 13.11 -0.26 21 | 30.72 0.68 12
| 0.00 -29.76 0.68 12 |
583.3 | 0.00 12.09 -0.26 21 | 28.50 0.68 12
| 0.00 -20.35 0.87 20 |
875.0 | 0.00 10.73 -0.26 21 | 26.45 0.68 12
| 0.00 -14.08 0.87 20 |
1166.7 | 0.00 8.96 -0.26 21 | 22.32 0.68 12
| 0.00 -0.06 0.04 10 |
1458.3 | 0.00 8.02 -0.23 13 | 19.31 0.68 12
| 0.00 -2.85 0.87 20 |
1750.0 | 0.00 7.79 0.28 11 | 15.45 0.87 20
| 0.00 -0.63 0.38 1 |
2041.7 | 0.00 9.28 0.68 12 | 13.49 0.87 20
| 0.00 -0.28 -0.67 3 |
2333.3 | 0.00 11.95 0.68 12 | 11.95 0.87 20
| 0.00 -4.46 -0.38 2 |
2625.0 | 0.00 13.56 0.68 12 | -16.97 -0.23 13
| 0.00 -8.07 -0.26 21 |
2916.7 | 0.00 15.69 0.87 20 | -19.02 -0.23 13
| 0.00 -12.97 -0.26 21 |
3208.3 | 0.00 18.08 0.87 20 | -21.24 -0.23 13
| 0.00 -18.22 -0.26 21 |
3500.0 | 0.00 20.19 0.87 20 | -22.33 -0.23 13
| 0.00 -23.75 -0.26 21 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 227.22 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 29.43 MX = 0.68 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 451 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 452
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -18.40 MX = -0.23 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 99 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.58 -0.12 3 | 123.21 3.68 11
| 0.00 -105.60 3.68 11 |
116.7 | 0.00 1.53 -0.12 3 | 121.24 3.68 11
| 0.00 -91.34 3.68 11 |
233.3 | 0.00 0.69 -0.02 2 | 118.89 3.68 11
| 0.00 -77.33 3.68 11 |
350.0 | 0.00 0.72 -0.02 2 | 116.30 3.68 11
| 0.00 -63.62 3.68 11 |
466.7 | 0.00 1.37 -0.12 3 | 113.37 3.68 11
| 0.00 -50.20 3.68 11 |
583.3 | 0.00 0.77 -0.02 2 | 110.61 3.68 11
| 0.00 -37.13 3.68 11 |
700.0 | 0.00 1.27 -0.12 3 | 107.19 3.68 11
| 0.00 -21.08 3.08 15 |
816.7 | 0.00 1.22 -0.12 3 | 103.50 3.68 11
| 0.00 -12.12 3.68 11 |
933.3 | 0.00 1.23 2.81 14 | 100.74 3.68 11
| 0.00 -1.57 3.08 15 |
1050.0 | 0.00 11.29 3.68 11 | 96.98 3.68 11
| 0.00 -1.11 0.12 4 |
1166.7 | 0.00 22.42 3.68 11 | 93.01 3.68 11
| 0.00 -1.06 0.12 4 |
1283.3 | 0.00 33.14 3.68 11 | 90.80 3.68 11
| 0.00 -1.01 0.12 4 |
1400.0 | 0.00 43.44 3.68 11 | 86.76 3.68 11
| 0.00 -0.95 0.12 4 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 704.70 408.17 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 283.96
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 452 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 453
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 9-10í 6-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 661.7 mm AWAY FROM START SUPPORT
VY = 108.30 MX = 3.68 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 100 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 125.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.99 0.15 1 | 108.95 16.36 11
| 0.00 -40.65 16.36 11 |
10.4 | 0.00 5.88 0.15 1 | 108.91 16.36 11
| 0.00 -39.51 16.36 11 |
20.8 | 0.00 5.77 0.15 1 | 108.86 16.36 11
| 0.00 -38.38 16.36 11 |
31.3 | 0.00 5.66 0.15 1 | 108.82 16.36 11
| 0.00 -37.24 16.36 11 |
41.7 | 0.00 0.51 0.01 7 | 108.77 16.36 11
| 0.00 -36.11 16.36 11 |
52.1 | 0.00 5.44 0.15 1 | 108.73 16.36 11
| 0.00 -34.98 16.36 11 |
62.5 | 0.00 5.33 0.15 1 | 108.68 16.36 11
| 0.00 -33.84 16.36 11 |
72.9 | 0.00 0.48 0.01 7 | 108.63 16.36 11
| 0.00 -32.44 12.90 13 |
83.3 | 0.00 5.11 0.15 1 | 108.59 16.36 11
| 0.00 -31.58 16.36 11 |
93.8 | 0.00 5.00 0.15 1 | 108.53 16.36 11
| 0.00 -30.45 16.36 11 |
104.2 | 0.00 4.89 0.15 1 | 108.48 16.36 11
| 0.00 -29.32 16.36 11 |
114.6 | 0.00 4.78 0.15 1 | 108.44 16.36 11
| 0.00 -28.19 16.36 11 |
125.0 | 0.00 4.67 0.15 1 | 108.38 16.36 11
| 0.00 -27.06 16.36 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 453 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 454
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 398.26 376.82 355.58 334.52 313.66
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 110 mm c/c @ 115 mm c/c @ 115 mm c/c @ 115 mm c/c @ 115 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 667.0 mm AWAY FROM END SUPPORT
VY = 200.46 MX = 16.36 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 101 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 454 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 455
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.10 0.37 1 | 37.52 -0.77 11
| 0.00 -5.73 -1.05 13 |
262.5 | 0.00 3.72 -0.77 11 | 32.64 -0.77 11
| 0.00 -1.09 -0.37 2 |
525.0 | 0.00 11.48 -0.77 11 | 25.86 -0.77 11
| 0.00 -1.07 -0.37 2 |
787.5 | 0.00 17.43 -0.77 11 | 18.89 -0.77 11
| 0.00 -1.05 -0.37 2 |
1050.0 | 0.00 21.33 -0.77 11 | 11.22 -0.77 11
| 0.00 -0.31 -0.06 3 |
1312.5 | 0.00 22.97 -0.77 11 | 0.83 -1.05 13
| 0.00 -1.01 -0.37 2 |
1575.0 | 0.00 22.17 -0.77 11 | -6.14 -1.05 13
| 0.00 -1.00 -0.37 2 |
1837.5 | 0.00 18.89 -0.77 11 | -16.49 -0.77 11
| 0.00 -0.98 -0.37 2 |
2100.0 | 0.00 13.17 -0.77 11 | -26.77 -0.77 11
| 0.00 -0.43 -0.06 3 |
2362.5 | 0.00 5.18 -0.77 11 | -34.43 -0.77 11
| 0.00 -0.94 -0.37 2 |
2625.0 | 0.00 0.93 0.37 1 | -41.41 -0.77 11
| 0.00 -4.99 -1.05 13 |
2887.5 | 0.00 0.91 0.37 1 | -48.19 -0.77 11
| 0.00 -16.69 -0.77 11 |
3150.0 | 0.00 0.89 0.37 1 | -53.06 -0.77 11
| 0.00 -30.00 -0.77 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 102 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 455 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 456
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.06 -0.33 1 | 50.76 2.75 11
| 0.00 -30.37 2.75 11 |
258.3 | 0.00 1.73 -0.33 1 | 45.97 2.75 11
| 0.00 -16.36 2.59 13 |
516.7 | 0.00 1.41 -0.33 1 | 39.30 2.75 11
| 0.00 -7.09 2.59 13 |
775.0 | 0.00 2.60 2.75 11 | 32.51 2.75 11
| 0.00 -0.92 1.90 21 |
1033.3 | 0.00 8.90 1.81 12 | 24.99 2.75 11
| 0.00 -0.76 0.33 2 |
1291.7 | 0.00 11.78 2.59 14 | 14.94 2.75 11
| 0.00 -0.44 0.33 2 |
1550.0 | 0.00 14.41 2.22 18 | 6.40 2.75 11
| 0.00 -0.20 0.33 3 |
1808.3 | 0.00 18.49 2.75 11 | -2.13 2.75 11
| 0.00 -0.21 -0.33 1 |
2066.7 | 0.00 16.60 2.75 11 | -12.18 2.75 11
| 0.00 -0.54 -0.33 1 |
2325.0 | 0.00 12.52 2.75 11 | -19.70 2.75 11
| 0.00 -0.86 -0.33 1 |
2583.3 | 0.00 6.48 2.75 11 | -26.49 2.75 11
| 0.00 -1.18 -0.33 1 |
2841.7 | 0.00 0.76 2.59 13 | -33.16 2.75 11
| 0.00 -1.31 2.75 11 |
3100.0 | 0.00 1.83 0.33 2 | -37.95 2.75 11
| 0.00 -10.51 2.75 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 197.79 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 103 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 456 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 457
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.98 4.55 11 | 29.01 4.55 11
| 0.00 -0.14 -0.18 2 |
262.5 | 0.00 9.77 4.55 11 | 22.71 4.55 11
| 0.00 -0.12 -0.18 2 |
525.0 | 0.00 14.79 4.55 11 | 15.20 4.55 11
| 0.00 -0.09 -0.18 2 |
787.5 | 0.00 17.86 4.55 11 | 7.86 4.55 11
| 0.00 -0.06 -0.18 2 |
1050.0 | 0.00 15.10 3.66 16 | 0.18 4.55 11
| 0.00 -0.04 -0.18 2 |
1312.5 | 0.00 17.61 4.55 11 | -10.13 4.55 11
| 0.00 -0.01 -0.18 2 |
1575.0 | 0.00 13.90 4.55 11 | -18.86 4.55 11
| 0.00 -0.02 0.18 1 |
1837.5 | 0.00 7.71 4.55 11 | -27.60 4.55 11
| 0.00 -0.05 0.18 1 |
2100.0 | 0.00 0.10 0.42 6 | -37.90 4.55 11
| 0.00 -0.93 4.55 11 |
2362.5 | 0.00 0.10 -0.18 2 | -45.59 4.55 11
| 0.00 -11.85 4.55 11 |
2625.0 | 0.00 0.13 -0.18 2 | -52.93 4.55 11
| 0.00 -24.82 4.55 11 |
2887.5 | 0.00 0.15 -0.18 2 | -60.44 4.55 11
| 0.00 -39.75 4.55 11 |
3150.0 | 0.00 0.18 -0.18 2 | -66.73 4.55 11
| 0.00 -56.44 4.55 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 372.23
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 11.45 MX = 4.55 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 457 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 458
============================================================================
B E A M N O. 104 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.34 -0.09 1 | 60.44 -0.09 11
| 0.00 -54.46 0.04 13 |
258.3 | 0.00 11.46 -0.09 1 | 54.25 -0.09 11
| 0.00 -40.35 0.04 13 |
516.7 | 0.00 9.57 -0.09 1 | 46.88 -0.09 11
| 0.00 -27.60 0.04 13 |
775.0 | 0.00 6.95 -0.17 20 | 40.51 0.04 13
| 0.00 -16.10 0.11 21 |
1033.3 | 0.00 8.81 -0.17 20 | 34.48 0.04 13
| 0.00 -8.57 0.11 21 |
1291.7 | 0.00 10.58 -0.18 12 | 26.42 0.04 13
| 0.00 -2.19 0.11 21 |
1550.0 | 0.00 9.86 -0.08 16 | 19.57 0.04 13
| 0.00 -2.02 0.09 2 |
1808.3 | 0.00 14.34 -0.09 11 | 13.37 0.11 21
| 0.00 -0.29 -0.06 4 |
2066.7 | 0.00 14.27 -0.09 11 | -13.46 -0.17 20
| 0.00 -0.09 -0.01 10 |
2325.0 | 0.00 13.99 0.04 13 | -18.90 -0.18 12
| 0.00 -3.64 -0.09 1 |
2583.3 | 0.00 12.85 0.04 13 | -24.66 -0.18 12
| 0.00 -5.53 -0.09 1 |
2841.7 | 0.00 11.64 0.11 21 | -30.56 -0.18 12
| 0.00 -10.61 -0.17 20 |
3100.0 | 0.00 10.22 0.11 21 | -35.51 -0.18 12
| 0.00 -17.69 -0.17 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 315.18 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 458 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 459
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 42.89 MX = -0.09 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -24.13 MX = -0.18 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 105 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.07 0.32 3 | 112.04 -6.62 11
| 0.00 -89.83 -6.62 11 |
116.7 | 0.00 9.58 0.32 3 | 109.28 -6.62 11
| 0.00 -76.92 -6.62 11 |
233.3 | 0.00 9.09 0.32 3 | 106.29 -6.62 11
| 0.00 -62.38 -5.68 15 |
350.0 | 0.00 8.60 0.32 3 | 103.33 -6.62 11
| 0.00 -52.11 -6.62 11 |
466.7 | 0.00 0.47 0.02 9 | 100.30 -6.62 11
| 0.00 -40.23 -6.62 11 |
583.3 | 0.00 7.63 0.32 3 | 96.75 -6.62 11
| 0.00 -32.14 -5.68 15 |
700.0 | 0.00 1.93 -2.19 22 | 93.52 -6.62 11
| 0.00 -17.63 -6.62 11 |
816.7 | 0.00 2.45 -4.91 14 | 90.28 -6.62 11
| 0.00 -13.26 -3.15 23 |
933.3 | 0.00 11.22 -2.19 22 | 86.74 -6.62 11
| 0.00 -4.66 -5.68 15 |
1050.0 | 0.00 17.49 -4.91 14 | 83.71 -6.62 11
| 0.00 -1.45 -3.15 23 |
1166.7 | 0.00 22.94 -6.62 11 | 80.75 -6.62 11
| 0.00 -5.18 -0.32 4 |
1283.3 | 0.00 32.18 -6.62 11 | 77.75 -6.62 11
| 0.00 -4.69 -0.32 4 |
1400.0 | 0.00 41.10 -6.62 11 | 75.00 -6.62 11
| 0.00 -4.20 -0.32 4 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 620.39 371.46 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 298.98
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 459 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 460
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 665.0 mm AWAY FROM START SUPPORT
VY = 94.49 MX = -6.62 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 106 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.01 -0.07 1 | 49.90 0.43 11
| 0.00 -25.03 0.43 11 |
285.4 | 0.00 0.01 -0.07 1 | 43.07 0.43 11
| 0.00 -11.76 0.43 11 |
570.8 | 0.00 0.01 -0.00 4 | 34.95 0.43 11
| 0.00 -0.51 0.42 13 |
856.3 | 0.00 6.56 0.42 13 | 27.02 0.43 11
| 0.00 -0.01 0.07 2 |
1141.7 | 0.00 14.55 0.43 11 | 16.71 0.43 11
| 0.00 -0.00 0.01 8 |
1427.1 | 0.00 14.46 0.42 13 | 7.69 0.43 11
| 0.00 -0.01 0.07 2 |
1712.5 | 0.00 18.73 0.43 11 | -3.16 0.43 11
| 0.00 -0.00 0.00 3 |
1997.9 | 0.00 16.29 0.43 11 | -14.00 0.43 11
| 0.00 -0.02 0.07 2 |
2283.3 | 0.00 8.75 0.35 17 | -23.03 0.43 11
| 0.00 -0.00 0.01 8 |
2568.8 | 0.00 2.82 0.43 11 | -33.34 0.43 11
| 0.00 -0.02 0.07 2 |
2854.2 | 0.00 0.02 -0.07 1 | -41.27 0.43 11
| 0.00 -7.83 0.43 11 |
3139.6 | 0.00 0.02 -0.07 1 | -49.39 0.43 11
| 0.00 -20.78 0.43 11 |
3425.0 | 0.00 0.02 -0.07 1 | -56.22 0.43 11
| 0.00 -35.85 0.43 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 460 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 461
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 207.51
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 35.81 MX = 0.43 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 107 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3750.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 461 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 462
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.01 -0.56 2 | 61.93 -0.40 11
| 0.00 -42.22 0.35 12 |
312.5 | 0.00 0.19 -1.04 21 | 54.44 -0.40 11
| 0.00 -22.17 0.64 20 |
625.0 | 0.00 5.90 -0.56 2 | 45.49 -0.40 11
| 0.00 -11.75 0.64 20 |
937.5 | 0.00 10.15 -1.04 21 | 36.74 -0.40 11
| 0.00 -2.86 0.64 20 |
1250.0 | 0.00 16.96 -1.00 13 | 26.20 0.35 12
| 0.00 -2.78 0.56 1 |
1562.5 | 0.00 23.37 -0.40 11 | 18.20 0.35 12
| 0.00 -0.58 0.26 4 |
1875.0 | 0.00 26.02 -0.40 11 | 8.99 0.64 20
| 0.00 -0.34 -0.56 2 |
2187.5 | 0.00 21.00 -0.01 15 | -14.17 -1.00 13
| 0.00 -0.87 -0.26 3 |
2500.0 | 0.00 20.30 0.35 12 | -22.17 -1.00 13
| 0.00 -3.46 -0.56 2 |
2812.5 | 0.00 15.68 0.35 12 | -31.35 -1.00 13
| 0.00 -5.02 -0.56 2 |
3125.0 | 0.00 10.72 0.64 20 | -38.35 -1.00 13
| 0.00 -9.00 -1.04 21 |
3437.5 | 0.00 8.13 0.56 1 | -49.41 -0.40 11
| 0.00 -20.32 -1.00 13 |
3750.0 | 0.00 9.69 0.56 1 | -56.90 -0.40 11
| 0.00 -35.48 -1.00 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 243.86 178.50 178.50 178.50 210.34
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 47.87 MX = -0.40 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 462 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 463
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -37.43 MX = -1.00 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 108 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.60 -0.18 1 | 42.30 0.57 11
| 0.00 -19.13 0.67 13 |
287.5 | 0.00 5.46 0.16 23 | 35.52 0.67 13
| 0.00 -9.85 0.55 21 |
575.0 | 0.00 13.53 0.25 12 | 28.82 0.67 13
| 0.00 -2.66 0.55 21 |
862.5 | 0.00 16.78 0.25 12 | 22.28 0.67 13
| 0.00 -0.31 0.02 8 |
1150.0 | 0.00 19.97 0.57 11 | 15.42 0.67 13
| 0.00 -1.70 0.18 2 |
1437.5 | 0.00 21.29 0.57 11 | 7.95 0.55 21
| 0.00 -0.03 -0.18 1 |
1725.0 | 0.00 19.58 0.57 11 | -16.23 0.25 12
| 0.00 -0.80 -0.09 4 |
2012.5 | 0.00 16.02 0.67 13 | -24.11 0.25 12
| 0.00 -3.48 -0.18 1 |
2300.0 | 0.00 11.16 0.55 21 | -32.85 0.57 11
| 0.00 -5.20 -0.18 1 |
2587.5 | 0.00 8.29 0.55 21 | -41.43 0.57 11
| 0.00 -12.49 0.02 20 |
2875.0 | 0.00 8.65 0.18 2 | -49.60 0.57 11
| 0.00 -23.81 0.25 12 |
3162.5 | 0.00 10.38 0.18 2 | -57.97 0.57 11
| 0.00 -38.30 0.25 12 |
3450.0 | 0.00 12.10 0.18 2 | -64.88 0.57 11
| 0.00 -54.50 0.25 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 317.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 463 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 464
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 29.61 MX = 0.67 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 109 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.92 -0.43 2 | 103.50 2.53 11
| 0.00 -101.58 2.53 11 |
208.3 | 0.00 0.19 0.06 4 | 98.54 2.53 11
| 0.00 -64.63 2.07 16 |
416.7 | 0.00 0.16 -0.04 8 | 92.80 2.53 11
| 0.00 -60.58 2.53 11 |
625.0 | 0.00 0.16 0.06 4 | 87.18 2.53 11
| 0.00 -35.28 2.55 12 |
833.3 | 0.00 1.40 -0.43 2 | 81.34 2.53 11
| 0.00 -24.27 2.53 11 |
1041.7 | 0.00 0.12 0.06 4 | 73.84 2.53 11
| 0.00 -8.09 2.53 11 |
1250.0 | 0.00 6.67 2.53 11 | 67.34 2.53 11
| 0.00 -1.14 0.43 1 |
1458.3 | 0.00 19.97 2.53 11 | 60.84 2.53 11
| 0.00 -1.01 0.43 1 |
1666.7 | 0.00 31.84 2.53 11 | 53.35 2.53 11
| 0.00 -0.07 -0.06 3 |
1875.0 | 0.00 42.37 2.53 11 | 47.50 2.53 11
| 0.00 -0.75 0.43 1 |
2083.3 | 0.00 51.66 2.53 11 | 41.88 2.53 11
| 0.00 -0.62 0.43 1 |
2291.7 | 0.00 59.76 2.53 11 | 36.14 2.53 11
| 0.00 -0.49 0.43 1 |
2500.0 | 0.00 66.78 2.53 11 | 31.18 2.53 11
| 0.00 -0.36 0.43 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 464 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 465
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 647.52 224.73 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 266.85 417.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 6-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 89.56 MX = 2.53 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 110 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 465 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 466
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 16.60 -4.04 11 | -101.59 -4.04 11
| 0.00 -0.89 1.09 2 |
91.7 | 0.00 7.03 -4.54 12 | -103.75 -4.04 11
| 0.00 0.00 0.00 1 |
183.3 | 0.00 0.77 -4.12 20 | -106.05 -4.04 11
| 0.00 -2.43 -4.04 11 |
275.0 | 0.00 1.42 -1.09 1 | -108.34 -4.04 11
| 0.00 -10.17 -3.33 15 |
366.7 | 0.00 0.01 0.01 9 | -110.67 -4.04 11
| 0.00 -22.29 -4.04 11 |
458.3 | 0.00 0.30 0.08 3 | -113.31 -4.04 11
| 0.00 -32.55 -4.04 11 |
550.0 | 0.00 1.96 -1.09 1 | -115.77 -4.04 11
| 0.00 -43.05 -4.04 11 |
641.7 | 0.00 2.14 -1.09 1 | -118.22 -4.04 11
| 0.00 -53.78 -4.04 11 |
733.3 | 0.00 2.32 -1.09 1 | -120.87 -4.04 11
| 0.00 -54.57 -1.93 13 |
825.0 | 0.00 2.49 -1.09 1 | -123.20 -4.04 11
| 0.00 -75.92 -4.04 11 |
916.7 | 0.00 2.67 -1.09 1 | -125.48 -4.04 11
| 0.00 -87.32 -4.04 11 |
1008.3 | 0.00 2.85 -1.09 1 | -127.79 -4.04 11
| 0.00 -98.93 -4.04 11 |
1100.0 | 0.00 3.03 -1.09 1 | -129.95 -4.04 11
| 0.00 -110.75 -4.04 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 285.18 495.64 750.73
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 4-10í 7-10í 10-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 660.0 mm AWAY FROM END SUPPORT
VY = -112.69 MX = -4.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 466 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 467
============================================================================
B E A M N O. 111 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 15.10 0.01 1 | 55.86 0.77 11
| 0.00 -47.10 0.61 13 |
264.6 | 0.00 12.97 0.01 1 | 49.51 0.77 11
| 0.00 -22.29 0.77 11 |
529.2 | 0.00 10.44 0.40 20 | 43.21 0.61 13
| 0.00 -21.12 0.61 13 |
793.8 | 0.00 8.71 0.01 1 | 37.28 0.61 13
| 0.00 -13.51 0.38 21 |
1058.3 | 0.00 13.66 0.40 20 | 31.08 0.61 13
| 0.00 -6.58 -0.01 2 |
1322.9 | 0.00 16.40 0.62 12 | 22.74 0.61 13
| 0.00 -4.45 -0.01 2 |
1587.5 | 0.00 13.91 0.62 16 | 15.68 0.61 13
| 0.00 -0.10 -0.70 3 |
1852.1 | 0.00 17.81 0.77 11 | -12.25 0.40 20
| 0.00 -0.01 -0.70 3 |
2116.7 | 0.00 16.04 0.77 11 | -19.04 0.62 12
| 0.00 -0.08 0.70 4 |
2381.2 | 0.00 14.46 0.61 13 | -25.25 0.62 12
| 0.00 -4.08 0.01 1 |
2645.8 | 0.00 12.76 0.38 21 | -31.18 0.62 12
| 0.00 -5.87 0.40 20 |
2910.4 | 0.00 11.81 0.38 21 | -37.25 0.62 12
| 0.00 -13.21 0.40 20 |
3175.0 | 0.00 10.47 -0.01 2 | -42.32 0.62 12
| 0.00 -22.45 0.62 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 275.54 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 467 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 468
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -30.93 MX = 0.62 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 112 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.13 -0.16 1 | 51.80 1.22 11
| 0.00 -11.69 1.22 11 |
291.7 | 0.00 2.22 1.18 14 | 46.45 1.22 11
| 0.00 -0.08 -0.17 4 |
583.3 | 0.00 15.12 1.22 11 | 38.64 1.22 11
| 0.00 -0.14 -0.16 1 |
875.0 | 0.00 25.29 1.22 11 | 30.78 1.22 11
| 0.00 -0.27 -0.16 1 |
1166.7 | 0.00 32.90 1.22 11 | 20.10 1.22 11
| 0.00 -0.41 -0.16 1 |
1458.3 | 0.00 30.35 1.18 14 | 10.82 1.22 11
| 0.00 -0.05 -0.01 7 |
1750.0 | 0.00 39.23 1.22 11 | 0.71 1.17 13
| 0.00 -0.06 -0.01 7 |
2041.7 | 0.00 31.12 1.17 13 | -10.43 1.22 11
| 0.00 -0.33 -0.17 4 |
2333.3 | 0.00 33.13 1.22 11 | -19.71 1.22 11
| 0.00 -0.08 -0.01 7 |
2625.0 | 0.00 25.63 1.22 11 | -30.39 1.22 11
| 0.00 -1.08 -0.16 1 |
2916.7 | 0.00 15.58 1.22 11 | -38.25 1.22 11
| 0.00 -1.21 -0.16 1 |
3208.3 | 0.00 4.19 1.17 13 | -46.07 1.22 11
| 0.00 -1.35 -0.16 1 |
3500.0 | 0.00 1.48 0.16 2 | -51.41 1.22 11
| 0.00 -11.01 1.22 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 234.61 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 468 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 469
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 113 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 3.38 -2.99 11 | 33.48 -2.99 11
| 0.00 -0.22 0.40 2 |
289.6 | 0.00 12.31 -2.99 11 | 27.98 -2.99 11
| 0.00 -0.08 0.40 2 |
579.2 | 0.00 19.42 -2.99 11 | 20.53 -2.99 11
| 0.00 -0.05 -0.40 1 |
868.7 | 0.00 24.27 -2.99 11 | 12.01 -2.99 11
| 0.00 -0.06 -0.02 4 |
1158.3 | 0.00 26.41 -2.99 11 | 3.04 -2.99 11
| 0.00 -0.32 -0.40 1 |
1447.9 | 0.00 25.57 -2.99 11 | -8.11 -2.99 11
| 0.00 -0.45 -0.40 1 |
1737.5 | 0.00 21.69 -2.99 11 | -18.65 -2.99 11
| 0.00 -0.59 -0.40 1 |
2027.1 | 0.00 14.77 -2.99 11 | -29.18 -2.99 11
| 0.00 -0.07 -0.04 7 |
2316.7 | 0.00 4.81 -2.99 11 | -40.34 -2.99 11
| 0.00 -0.25 -2.23 20 |
2606.2 | 0.00 0.99 0.40 2 | -49.30 -2.99 11
| 0.00 -8.13 -2.99 11 |
2895.8 | 0.00 1.12 0.40 2 | -57.82 -2.99 11
| 0.00 -23.78 -2.99 11 |
3185.4 | 0.00 1.26 0.40 2 | -65.28 -2.99 11
| 0.00 -41.68 -2.99 11 |
3475.0 | 0.00 1.39 0.40 2 | -70.77 -2.99 11
| 0.00 -61.41 -2.99 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 387.21
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 469 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 470
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -60.52 MX = -2.99 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 114 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.22 -1.30 1 | -54.70 -9.63 11
| 0.00 -0.85 -9.63 11 |
27.1 | 0.00 0.01 0.00 10 | -54.81 -9.63 11
| 0.00 -2.34 -9.63 11 |
54.2 | 0.00 0.28 -1.30 1 | -54.93 -9.63 11
| 0.00 -3.82 -9.63 11 |
81.2 | 0.00 0.31 -1.30 1 | -55.06 -9.63 11
| 0.00 -5.31 -9.63 11 |
108.3 | 0.00 0.09 0.12 4 | -55.20 -9.63 11
| 0.00 -5.55 -7.84 14 |
135.4 | 0.00 0.37 -1.30 1 | -55.31 -9.63 11
| 0.00 -8.30 -9.63 11 |
162.5 | 0.00 0.40 -1.30 1 | -55.47 -9.63 11
| 0.00 -9.80 -9.63 11 |
189.6 | 0.00 0.42 -1.30 1 | -55.65 -9.63 11
| 0.00 -11.31 -9.63 11 |
216.7 | 0.00 0.45 -1.30 1 | -55.75 -9.63 11
| 0.00 -9.71 -9.27 12 |
243.8 | 0.00 0.48 -1.30 1 | -55.94 -9.63 11
| 0.00 -14.33 -9.63 11 |
270.8 | 0.00 0.51 -1.30 1 | -56.15 -9.63 11
| 0.00 -15.84 -9.63 11 |
297.9 | 0.00 0.54 -1.30 1 | -56.26 -9.63 11
| 0.00 -17.37 -9.63 11 |
325.0 | 0.00 0.57 -1.30 1 | -56.47 -9.63 11
| 0.00 -18.89 -9.63 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 470 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 471
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 196.98
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 115 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.33 0.05 1 | 64.78 -0.33 11
| 0.00 -52.88 -0.33 11 |
285.4 | 0.00 5.40 0.05 1 | 59.71 -0.33 11
| 0.00 -28.69 -0.27 17 |
570.8 | 0.00 4.48 0.05 1 | 52.29 -0.33 11
| 0.00 -20.70 -0.32 13 |
856.3 | 0.00 3.55 0.05 1 | 43.83 -0.33 11
| 0.00 -7.82 -0.22 21 |
1141.7 | 0.00 7.82 -0.21 12 | 33.76 -0.33 11
| 0.00 -1.50 -0.22 21 |
1427.1 | 0.00 13.97 -0.33 11 | 22.36 -0.33 11
| 0.00 -1.70 -0.05 2 |
1712.5 | 0.00 18.69 -0.33 11 | 12.12 -0.32 13
| 0.00 -0.01 -0.00 9 |
1997.9 | 0.00 19.84 -0.33 11 | -5.33 -0.21 12
| 0.00 0.00 0.00 1 |
2283.3 | 0.00 17.57 -0.33 11 | -14.45 -0.21 12
| 0.00 -1.08 0.05 1 |
2568.8 | 0.00 12.26 -0.33 11 | -23.26 -0.33 11
| 0.00 -2.00 0.05 1 |
2854.2 | 0.00 6.97 -0.32 13 | -31.72 -0.33 11
| 0.00 -2.93 0.05 1 |
3139.6 | 0.00 3.86 -0.05 2 | -39.15 -0.33 11
| 0.00 -9.25 -0.21 12 |
3425.0 | 0.00 4.78 -0.05 2 | -44.21 -0.33 11
| 0.00 -19.87 -0.21 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 471 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 472
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 307.69 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -29.28 MX = -0.33 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 116 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 200.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 472 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 473
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.34 -3.44 1 | 121.62 13.69 13
| 0.00 -110.55 11.94 11 |
16.7 | 0.00 6.75 -3.44 1 | 121.56 13.69 13
| 0.00 -108.92 11.94 11 |
33.3 | 0.00 6.15 -3.44 1 | 121.51 13.69 13
| 0.00 -107.28 11.94 11 |
50.0 | 0.00 0.50 -0.32 7 | 121.45 13.69 13
| 0.00 -105.65 11.94 11 |
66.7 | 0.00 4.95 -3.44 1 | 121.38 13.69 13
| 0.00 -104.02 11.94 11 |
83.3 | 0.00 4.35 -3.44 1 | 121.33 13.69 13
| 0.00 -102.39 11.94 11 |
100.0 | 0.00 3.75 -3.44 1 | 121.26 13.69 13
| 0.00 -100.77 11.94 11 |
116.7 | 0.00 2.68 -1.97 4 | 121.19 13.69 13
| 0.00 -82.53 11.92 14 |
133.3 | 0.00 2.55 -3.44 1 | 121.13 13.69 13
| 0.00 -97.52 11.94 11 |
150.0 | 0.00 1.95 -3.44 1 | 121.06 13.69 13
| 0.00 -95.89 11.94 11 |
166.7 | 0.00 1.35 -3.44 1 | 120.97 13.69 13
| 0.00 -94.27 11.94 11 |
183.3 | 0.00 0.75 -3.44 1 | 120.92 13.69 13
| 0.00 -92.65 11.94 11 |
200.0 | 0.00 0.15 -3.44 1 | 120.83 13.69 13
| 0.00 -91.03 11.94 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 851.98 814.05 773.39 737.08 697.76
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 11-10í 11-10í 10-10í 10-10í 9-10í
REINF. 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 115 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 536.7 mm AWAY FROM END SUPPORT
VY = 170.26 MX = 13.69 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 473 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 474
============================================================================
B E A M N O. 119 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.05 -0.02 1 | 37.88 1.89 11
| 0.00 -19.67 1.53 13 |
262.5 | 0.00 9.31 0.91 20 | 32.84 1.89 11
| 0.00 -11.38 0.96 21 |
525.0 | 0.00 10.62 1.49 12 | 26.44 1.89 11
| 0.00 -5.92 0.96 21 |
787.5 | 0.00 14.09 1.49 12 | 19.50 1.89 11
| 0.00 -1.36 0.96 21 |
1050.0 | 0.00 16.02 1.49 12 | 14.98 1.53 13
| 0.00 -3.43 0.02 2 |
1312.5 | 0.00 16.40 1.49 12 | 9.06 1.53 13
| 0.00 -2.27 0.02 2 |
1575.0 | 0.00 14.14 1.44 15 | -7.43 1.49 12
| 0.00 -1.11 0.02 2 |
1837.5 | 0.00 12.60 1.53 13 | -13.35 1.49 12
| 0.00 -0.04 0.06 3 |
2100.0 | 0.00 11.10 1.53 13 | -17.47 1.89 11
| 0.00 -0.12 -0.06 4 |
2362.5 | 0.00 8.04 1.53 13 | -24.87 1.89 11
| 0.00 -2.36 -0.02 1 |
2625.0 | 0.00 3.45 1.53 13 | -31.80 1.89 11
| 0.00 -6.26 0.91 20 |
2887.5 | 0.00 4.67 0.02 2 | -38.21 1.89 11
| 0.00 -13.79 1.49 12 |
3150.0 | 0.00 5.83 0.02 2 | -43.24 1.89 11
| 0.00 -23.76 1.49 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 474 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 475
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 26.48 MX = 1.89 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -31.43 MX = 1.89 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 121 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.22 0.07 2 | 52.29 -2.91 11
| 0.00 -24.93 -2.91 11 |
289.6 | 0.00 0.02 -0.02 3 | 46.84 -2.91 11
| 0.00 -8.63 -2.41 12 |
579.2 | 0.00 2.01 -2.91 11 | 39.04 -2.91 11
| 0.00 -0.10 -0.07 1 |
868.7 | 0.00 12.29 -2.91 11 | 30.58 -2.91 11
| 0.00 -0.04 -0.07 1 |
1158.3 | 0.00 19.90 -2.91 11 | 22.46 -2.91 11
| 0.00 -0.02 0.07 2 |
1447.9 | 0.00 19.47 -2.34 16 | 8.77 -2.91 11
| 0.00 -0.01 0.01 8 |
1737.5 | 0.00 25.33 -2.91 11 | -2.63 -2.91 11
| 0.00 -0.14 0.07 2 |
2027.1 | 0.00 22.75 -2.91 11 | -15.15 -2.91 11
| 0.00 -0.20 0.07 2 |
2316.7 | 0.00 16.62 -2.91 11 | -28.87 -2.91 11
| 0.00 -0.06 -0.02 3 |
2606.2 | 0.00 7.09 -2.91 11 | -37.17 -2.91 11
| 0.00 -0.31 0.07 2 |
2895.8 | 0.00 0.37 -0.07 1 | -47.43 -2.91 11
| 0.00 -5.35 -2.91 11 |
3185.4 | 0.00 0.43 -0.07 1 | -54.74 -2.91 11
| 0.00 -20.24 -2.91 11 |
3475.0 | 0.00 0.49 -0.07 1 | -61.47 -2.91 11
| 0.00 -37.19 -2.91 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 239.01
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 475 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 476
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 40.19 MX = -2.91 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -45.27 MX = -2.91 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 123 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 73.62 -1.45 11 | -97.64 -1.45 11
| 0.00 -0.95 0.65 1 |
122.9 | 0.00 49.29 -1.22 17 | -99.75 -1.45 11
| 0.00 -0.92 0.65 1 |
245.8 | 0.00 40.34 -1.94 13 | -102.40 -1.45 11
| 0.00 -0.90 0.65 1 |
368.8 | 0.00 36.34 -1.45 11 | -104.98 -1.45 11
| 0.00 -0.74 0.21 4 |
491.7 | 0.00 23.26 -1.45 11 | -107.71 -1.45 11
| 0.00 -0.85 0.65 1 |
614.6 | 0.00 9.79 -1.45 11 | -111.58 -1.45 11
| 0.00 -0.82 0.65 1 |
737.5 | 0.00 0.80 -0.65 2 | -114.77 -1.45 11
| 0.00 -4.10 -1.45 11 |
860.4 | 0.00 0.78 -0.65 2 | -117.95 -1.45 11
| 0.00 -18.42 -1.45 11 |
983.3 | 0.00 0.75 -0.65 2 | -121.83 -1.45 11
| 0.00 -33.17 -1.45 11 |
1106.3 | 0.00 0.73 -0.65 2 | -124.55 -1.45 11
| 0.00 -48.30 -1.45 11 |
1229.2 | 0.00 0.70 -0.65 2 | -127.13 -1.45 11
| 0.00 -63.78 -1.45 11 |
1352.1 | 0.00 0.68 -0.65 2 | -129.78 -1.45 11
| 0.00 -79.58 -1.45 11 |
1475.0 | 0.00 0.65 -0.65 2 | -131.89 -1.45 11
| 0.00 -95.66 -1.45 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 476 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 477
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 293.38 598.27
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 448.28 219.76 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 667.0 mm AWAY FROM END SUPPORT
VY = -116.36 MX = -1.45 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 125 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 477 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 478
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 11.33 0.42 2 | 50.61 2.58 11
| 0.00 -42.08 1.56 12 |
258.3 | 0.00 3.51 1.86 21 | 45.82 2.58 11
| 0.00 -19.47 2.02 16 |
516.7 | 0.00 8.14 0.42 2 | 39.24 2.58 11
| 0.00 -19.42 1.56 12 |
775.0 | 0.00 8.21 1.86 21 | 32.53 2.58 11
| 0.00 -11.40 0.59 20 |
1033.3 | 0.00 9.20 1.86 21 | 25.11 2.58 11
| 0.00 -5.62 0.59 20 |
1291.7 | 0.00 9.15 1.86 21 | 15.31 2.58 11
| 0.00 -3.34 -0.42 1 |
1550.0 | 0.00 12.56 2.58 11 | 6.26 2.58 11
| 0.00 -1.74 -0.42 1 |
1808.3 | 0.00 10.54 2.57 13 | -9.65 2.57 13
| 0.00 -0.00 0.18 3 |
2066.7 | 0.00 11.08 2.58 11 | -17.49 2.57 13
| 0.00 -1.46 0.42 2 |
2325.0 | 0.00 9.23 1.56 12 | -23.43 2.57 13
| 0.00 -1.56 1.86 21 |
2583.3 | 0.00 6.29 1.56 12 | -28.80 2.57 13
| 0.00 -6.74 1.86 21 |
2841.7 | 0.00 5.98 0.59 20 | -34.07 2.57 13
| 0.00 -13.06 2.57 13 |
3100.0 | 0.00 7.85 -0.42 1 | -38.08 2.58 11
| 0.00 -22.37 2.57 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 254.88 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 35.69 MX = 2.58 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 478 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 479
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -28.32 MX = 2.57 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 126 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.70 0.06 2 | 34.54 0.09 11
| 0.00 -31.50 -0.01 12 |
250.0 | 0.00 2.81 -0.07 3 | 31.32 -0.01 12
| 0.00 -23.24 -0.01 12 |
500.0 | 0.00 5.73 0.06 2 | 26.99 -0.01 12
| 0.00 -13.92 -0.04 20 |
750.0 | 0.00 4.24 0.06 2 | 22.78 -0.01 12
| 0.00 -6.52 0.15 15 |
1000.0 | 0.00 2.76 0.06 2 | 18.33 -0.01 12
| 0.00 -4.66 -0.04 20 |
1250.0 | 0.00 2.62 0.15 21 | 11.91 -0.04 20
| 0.00 -0.74 -0.01 12 |
1500.0 | 0.00 1.76 0.09 11 | -9.16 0.15 21
| 0.00 -0.16 -0.07 3 |
1750.0 | 0.00 3.12 -0.04 20 | -12.72 0.15 13
| 0.00 -1.96 0.15 21 |
2000.0 | 0.00 4.00 -0.04 20 | -19.07 0.15 13
| 0.00 -3.18 0.06 2 |
2250.0 | 0.00 4.67 -0.06 1 | -23.53 0.15 13
| 0.00 -10.73 0.15 13 |
2500.0 | 0.00 6.15 -0.06 1 | -27.73 0.15 13
| 0.00 -17.17 0.15 13 |
2750.0 | 0.00 7.64 -0.06 1 | -32.06 0.15 13
| 0.00 -24.67 0.15 13 |
3000.0 | 0.00 9.12 -0.06 1 | -35.50 0.15 13
| 0.00 -33.12 0.15 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 188.82
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 479 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 480
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 26.53 MX = -0.01 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -27.04 MX = 0.15 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 129 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.60 0.28 2 | 58.66 -9.05 11
| 0.00 -30.14 -9.05 11 |
91.7 | 0.00 2.40 0.28 2 | 57.12 -9.05 11
| 0.00 -22.74 -7.58 12 |
183.3 | 0.00 2.19 0.28 2 | 55.35 -9.05 11
| 0.00 -19.68 -9.05 11 |
275.0 | 0.00 1.98 0.28 2 | 53.42 -9.05 11
| 0.00 -14.69 -9.05 11 |
366.7 | 0.00 1.78 0.28 2 | 51.28 -9.05 11
| 0.00 -9.89 -9.05 11 |
458.3 | 0.00 0.20 -4.66 22 | 49.25 -9.05 11
| 0.00 -5.28 -9.05 11 |
550.0 | 0.00 0.99 -7.35 14 | 46.82 -9.05 11
| 0.00 -0.88 -9.05 11 |
641.7 | 0.00 3.31 -9.05 11 | 44.21 -9.05 11
| 0.00 -1.16 -0.28 1 |
733.3 | 0.00 7.27 -9.05 11 | 42.18 -9.05 11
| 0.00 -0.95 -0.28 1 |
825.0 | 0.00 10.99 -9.05 11 | 39.53 -9.05 11
| 0.00 -0.75 -0.28 1 |
916.7 | 0.00 14.52 -9.05 11 | 36.76 -9.05 11
| 0.00 -0.54 -0.28 1 |
1008.3 | 0.00 17.81 -9.05 11 | 35.07 -9.05 11
| 0.00 -0.68 0.09 4 |
1100.0 | 0.00 20.86 -9.05 11 | 32.25 -9.05 11
| 0.00 -0.53 0.09 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 480 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 481
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 257.21 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 202.93
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 44.16 MX = -9.05 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 131 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 481 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 482
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.71 0.35 2 | 43.23 -0.04 11
| 0.00 -27.07 -0.04 11 |
258.3 | 0.00 0.67 0.35 2 | 38.64 -0.04 11
| 0.00 -13.27 -0.07 16 |
516.7 | 0.00 0.63 0.35 2 | 31.86 -0.04 11
| 0.00 -7.35 -0.04 11 |
775.0 | 0.00 0.76 0.39 13 | 25.40 -0.04 11
| 0.00 -1.30 -0.55 20 |
1033.3 | 0.00 5.06 0.39 13 | 16.63 -0.04 11
| 0.00 -0.55 -0.35 1 |
1291.7 | 0.00 8.48 -0.04 11 | 5.44 -0.45 12
| 0.00 -0.05 -0.03 7 |
1550.0 | 0.00 7.63 0.39 13 | -3.06 -0.45 12
| 0.00 -0.46 -0.35 1 |
1808.3 | 0.00 6.37 -0.04 11 | -14.82 -0.04 11
| 0.00 -0.42 -0.35 1 |
2066.7 | 0.00 0.62 0.50 21 | -26.60 -0.04 11
| 0.00 -0.38 -0.35 1 |
2325.0 | 0.00 0.34 0.35 2 | -35.38 -0.04 11
| 0.00 -6.65 -0.04 11 |
2583.3 | 0.00 0.30 0.35 2 | -42.03 -0.04 11
| 0.00 -16.67 -0.04 11 |
2841.7 | 0.00 0.26 0.35 2 | -49.54 -0.04 11
| 0.00 -28.63 -0.04 11 |
3100.0 | 0.00 0.21 0.35 2 | -55.19 -0.04 11
| 0.00 -42.19 -0.04 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 240.66
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 33.37 MX = -0.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 482 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 483
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -37.72 MX = -0.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 133 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.55 1.86 11 | 11.28 1.86 11
| 0.00 -0.39 0.09 1 |
208.3 | 0.00 11.95 1.49 14 | 7.56 1.86 11
| 0.00 -0.29 0.09 1 |
416.7 | 0.00 15.60 1.86 11 | 2.77 1.86 11
| 0.00 -0.19 0.09 1 |
625.0 | 0.00 15.64 1.86 11 | -2.22 1.86 11
| 0.00 -0.08 0.09 1 |
833.3 | 0.00 14.50 1.86 11 | -7.74 1.86 11
| 0.00 -0.02 -0.09 2 |
1041.7 | 0.00 11.94 1.86 11 | -16.89 1.86 11
| 0.00 -0.12 -0.09 2 |
1250.0 | 0.00 7.84 1.86 11 | -23.98 1.86 11
| 0.00 -0.23 -0.09 2 |
1458.3 | 0.00 2.08 1.60 12 | -31.38 1.86 11
| 0.00 -0.37 0.00 3 |
1666.7 | 0.00 0.43 0.09 1 | -40.58 1.86 11
| 0.00 -5.31 1.86 11 |
1875.0 | 0.00 0.54 0.09 1 | -46.35 1.86 11
| 0.00 -14.31 1.86 11 |
2083.3 | 0.00 0.64 0.09 1 | -52.80 1.86 11
| 0.00 -24.65 1.86 11 |
2291.7 | 0.00 0.74 0.09 1 | -58.02 1.86 11
| 0.00 -36.23 1.86 11 |
2500.0 | 0.00 0.85 0.09 1 | -62.92 1.86 11
| 0.00 -48.87 1.86 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 298.65
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 483 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 484
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = -0.34 MX = 1.86 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -45.12 MX = 1.86 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 134 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.34 0.58 21 | 31.33 -0.22 12
| 0.00 -15.77 -0.35 20 |
245.8 | 0.00 13.99 0.58 21 | 27.82 -0.22 12
| 0.00 -8.06 -0.31 1 |
491.7 | 0.00 14.72 0.52 13 | 22.60 -0.22 12
| 0.00 -5.30 -0.35 20 |
737.5 | 0.00 15.78 0.52 13 | 17.63 -0.22 12
| 0.00 -4.77 -0.31 1 |
983.3 | 0.00 15.44 0.52 13 | 11.72 -0.35 20
| 0.00 -0.29 -0.03 7 |
1229.2 | 0.00 14.55 0.19 11 | -13.14 0.58 21
| 0.00 -1.48 -0.31 1 |
1475.0 | 0.00 9.87 -0.22 12 | -19.95 0.52 13
| 0.00 -0.02 0.05 3 |
1720.8 | 0.00 7.94 -0.22 12 | -26.89 0.52 13
| 0.00 -1.80 0.31 2 |
1966.7 | 0.00 5.03 -0.35 20 | -36.02 0.52 13
| 0.00 -5.31 0.58 21 |
2212.5 | 0.00 5.09 -0.31 1 | -41.49 0.52 13
| 0.00 -13.65 0.52 13 |
2458.3 | 0.00 6.74 -0.31 1 | -46.46 0.52 13
| 0.00 -24.52 0.52 13 |
2704.2 | 0.00 8.38 -0.31 1 | -54.57 0.19 11
| 0.00 -36.64 0.52 13 |
2950.0 | 0.00 10.02 -0.31 1 | -58.96 0.19 11
| 0.00 -49.78 0.52 13 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 484 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 485
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 290.79
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 22.02 MX = -0.22 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 135 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 485 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 486
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.41 -0.18 1 | 48.67 0.34 11
| 0.00 -32.31 0.49 13 |
264.6 | 0.00 7.82 -0.18 1 | 43.96 0.34 11
| 0.00 -20.59 0.49 13 |
529.2 | 0.00 6.22 -0.18 1 | 36.79 0.49 13
| 0.00 -11.42 0.44 21 |
793.8 | 0.00 10.07 0.06 12 | 31.43 0.49 13
| 0.00 -4.86 0.44 21 |
1058.3 | 0.00 12.43 0.34 11 | 24.20 0.49 13
| 0.00 -0.71 0.03 3 |
1322.9 | 0.00 15.07 0.06 12 | 15.69 0.49 13
| 0.00 -0.36 0.03 3 |
1587.5 | 0.00 14.70 0.49 13 | 9.64 0.44 21
| 0.00 -0.18 -0.18 1 |
1852.1 | 0.00 15.37 0.49 13 | -16.14 0.06 12
| 0.00 -0.34 -0.03 4 |
2116.7 | 0.00 13.76 0.49 13 | -24.64 0.06 12
| 0.00 -3.37 -0.18 1 |
2381.2 | 0.00 10.44 0.44 21 | -30.78 0.34 11
| 0.00 -4.97 -0.18 1 |
2645.8 | 0.00 8.98 0.44 21 | -37.48 0.34 11
| 0.00 -10.97 0.06 12 |
2910.4 | 0.00 8.17 0.18 2 | -44.51 0.34 11
| 0.00 -21.61 0.06 12 |
3175.0 | 0.00 9.77 0.18 2 | -49.23 0.34 11
| 0.00 -33.44 0.06 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 187.38 178.08 178.08 178.08 189.86
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 34.95 MX = 0.49 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 486 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 487
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -33.88 MX = 0.34 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 137 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 15.79 -0.37 2 | 32.82 0.37 12
| 0.00 -40.78 0.37 12 |
291.7 | 0.00 13.27 -0.37 2 | 31.73 0.37 12
| 0.00 -31.37 0.37 12 |
583.3 | 0.00 10.74 -0.37 2 | 29.52 0.37 12
| 0.00 -22.41 0.37 12 |
875.0 | 0.00 10.10 -0.43 21 | 27.46 0.37 12
| 0.00 -14.54 0.67 20 |
1166.7 | 0.00 8.52 -0.43 21 | 23.33 0.37 12
| 0.00 -8.54 0.67 20 |
1458.3 | 0.00 7.55 -0.51 13 | 20.32 0.37 12
| 0.00 -3.06 0.67 20 |
1750.0 | 0.00 6.86 -0.51 13 | 15.87 0.67 20
| 0.00 -0.09 0.62 4 |
2041.7 | 0.00 9.43 0.37 12 | 13.91 0.67 20
| 0.00 -0.27 -0.62 3 |
2333.3 | 0.00 12.40 0.37 12 | 12.38 0.67 20
| 0.00 -4.42 -0.37 2 |
2625.0 | 0.00 14.31 0.37 12 | -15.80 -0.51 13
| 0.00 -7.59 -0.43 21 |
2916.7 | 0.00 16.10 0.67 20 | -17.85 -0.51 13
| 0.00 -12.31 -0.43 21 |
3208.3 | 0.00 18.62 0.67 20 | -20.06 -0.51 13
| 0.00 -17.37 -0.43 21 |
3500.0 | 0.00 20.85 0.67 20 | -21.15 -0.51 13
| 0.00 -22.71 -0.43 21 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 235.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 487 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 488
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 30.44 MX = 0.37 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -17.23 MX = -0.51 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 138 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.66 -0.11 3 | 123.89 2.63 11
| 0.00 -106.96 2.63 11 |
116.7 | 0.00 1.61 -0.11 3 | 121.92 2.63 11
| 0.00 -76.02 2.24 15 |
233.3 | 0.00 1.55 -0.11 3 | 119.57 2.63 11
| 0.00 -78.54 2.63 11 |
350.0 | 0.00 1.50 -0.11 3 | 116.98 2.63 11
| 0.00 -64.74 2.63 11 |
466.7 | 0.00 0.07 -0.00 8 | 114.05 2.63 11
| 0.00 -51.24 2.63 11 |
583.3 | 0.00 1.38 -0.11 3 | 111.29 2.63 11
| 0.00 -38.10 2.63 11 |
700.0 | 0.00 0.07 -0.01 9 | 107.87 2.63 11
| 0.00 -25.33 2.63 11 |
816.7 | 0.00 1.27 -0.11 3 | 104.18 2.63 11
| 0.00 -12.93 2.63 11 |
933.3 | 0.00 0.71 1.97 14 | 101.42 2.63 11
| 0.00 -0.94 2.63 11 |
1050.0 | 0.00 10.64 2.63 11 | 97.66 2.63 11
| 0.00 -1.16 0.11 4 |
1166.7 | 0.00 21.85 2.63 11 | 93.69 2.63 11
| 0.00 -1.10 0.11 4 |
1283.3 | 0.00 32.65 2.63 11 | 91.48 2.63 11
| 0.00 -1.05 0.11 4 |
1400.0 | 0.00 43.03 2.63 11 | 87.44 2.63 11
| 0.00 -0.99 0.11 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 488 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 489
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 702.07 404.39 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 271.14
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 9-10í 6-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 661.7 mm AWAY FROM START SUPPORT
VY = 108.98 MX = 2.63 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 139 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 125.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 489 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 490
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.11 0.16 1 | 131.96 16.22 11
| 0.00 -49.26 16.22 11 |
10.4 | 0.00 5.05 0.16 1 | 131.91 16.22 11
| 0.00 -44.38 12.79 13 |
20.8 | 0.00 5.00 0.16 1 | 131.87 16.22 11
| 0.00 -37.76 12.96 17 |
31.3 | 0.00 0.34 0.02 4 | 131.83 16.22 11
| 0.00 -45.14 16.22 11 |
41.7 | 0.00 0.34 0.02 4 | 131.78 16.22 11
| 0.00 -43.77 16.22 11 |
52.1 | 0.00 0.02 0.00 10 | 131.74 16.22 11
| 0.00 -42.40 16.22 11 |
62.5 | 0.00 0.33 0.02 4 | 131.69 16.22 11
| 0.00 -41.03 16.22 11 |
72.9 | 0.00 4.71 0.16 1 | 131.64 16.22 11
| 0.00 -39.65 16.22 11 |
83.3 | 0.00 4.66 0.16 1 | 131.60 16.22 11
| 0.00 -38.28 16.22 11 |
93.8 | 0.00 4.60 0.16 1 | 131.54 16.22 11
| 0.00 -36.91 16.22 11 |
104.2 | 0.00 4.54 0.16 1 | 131.49 16.22 11
| 0.00 -35.54 16.22 11 |
114.6 | 0.00 4.48 0.16 1 | 131.45 16.22 11
| 0.00 -34.17 16.22 11 |
125.0 | 0.00 4.43 0.16 1 | 131.39 16.22 11
| 0.00 -32.80 16.22 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 448.17 421.96 396.03 370.37 344.97
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 4-12í 4-12í 4-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = 242.79 MX = 16.22 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 490 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 491
============================================================================
B E A M N O. 140 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.05 0.35 1 | 37.04 -1.16 11
| 0.00 -5.39 -1.36 13 |
262.5 | 0.00 3.95 -1.16 11 | 32.17 -1.16 11
| 0.00 -1.04 -0.35 2 |
525.0 | 0.00 11.59 -1.16 11 | 25.39 -1.16 11
| 0.00 -1.03 -0.35 2 |
787.5 | 0.00 17.41 -1.16 11 | 18.41 -1.16 11
| 0.00 -1.03 -0.35 2 |
1050.0 | 0.00 21.19 -1.16 11 | 10.75 -1.16 11
| 0.00 -1.02 -0.35 2 |
1312.5 | 0.00 22.71 -1.16 11 | 0.41 -1.36 13
| 0.00 -1.01 -0.35 2 |
1575.0 | 0.00 21.78 -1.16 11 | -8.25 -1.16 11
| 0.00 -1.00 -0.35 2 |
1837.5 | 0.00 18.38 -1.16 11 | -16.96 -1.16 11
| 0.00 -0.42 -0.08 3 |
2100.0 | 0.00 10.58 -0.84 15 | -27.24 -1.16 11
| 0.00 -0.98 -0.35 2 |
2362.5 | 0.00 4.42 -1.16 11 | -34.91 -1.16 11
| 0.00 -0.03 -1.25 21 |
2625.0 | 0.00 0.96 0.35 1 | -41.89 -1.16 11
| 0.00 -5.74 -1.36 13 |
2887.5 | 0.00 0.95 0.35 1 | -48.67 -1.16 11
| 0.00 -17.70 -1.16 11 |
3150.0 | 0.00 0.94 0.35 1 | -53.54 -1.16 11
| 0.00 -31.14 -1.16 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 187.04
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 491 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 492
============================================================================
B E A M N O. 141 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.07 -0.34 1 | 51.29 3.68 11
| 0.00 -31.47 3.68 11 |
258.3 | 0.00 0.05 -0.02 10 | 46.50 3.68 11
| 0.00 -18.82 3.68 11 |
516.7 | 0.00 0.68 -0.33 4 | 39.83 3.68 11
| 0.00 -7.58 3.68 11 |
775.0 | 0.00 1.90 3.68 11 | 33.04 3.68 11
| 0.00 -1.39 2.40 21 |
1033.3 | 0.00 9.42 3.68 11 | 25.52 3.68 11
| 0.00 -0.45 0.33 3 |
1291.7 | 0.00 14.76 3.68 11 | 15.47 3.68 11
| 0.00 -0.34 0.33 3 |
1550.0 | 0.00 13.93 3.34 14 | 6.94 3.68 11
| 0.00 -0.03 0.03 8 |
1808.3 | 0.00 18.35 3.68 11 | -1.60 3.68 11
| 0.00 -0.17 -0.34 1 |
2066.7 | 0.00 13.28 3.34 14 | -11.65 3.68 11
| 0.00 -0.02 -0.03 7 |
2325.0 | 0.00 12.65 3.68 11 | -19.17 3.68 11
| 0.00 -0.81 -0.34 1 |
2583.3 | 0.00 6.75 3.68 11 | -25.96 3.68 11
| 0.00 -1.13 -0.34 1 |
2841.7 | 0.00 1.02 3.35 13 | -32.63 3.68 11
| 0.00 -0.91 3.68 11 |
3100.0 | 0.00 1.78 0.34 2 | -37.42 3.68 11
| 0.00 -9.97 3.68 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 213.35 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 492 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 493
============================================================================
B E A M N O. 142 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 11.26 4.89 11 | 23.45 4.89 11
| 0.00 -0.21 -0.17 2 |
262.5 | 0.00 16.59 4.89 11 | 17.16 4.89 11
| 0.00 -0.17 -0.17 2 |
525.0 | 0.00 16.29 4.12 12 | 9.65 4.89 11
| 0.00 -0.01 -0.04 4 |
787.5 | 0.00 21.77 4.89 11 | 2.31 4.89 11
| 0.00 -0.01 -0.04 4 |
1050.0 | 0.00 21.32 4.89 11 | -5.38 4.89 11
| 0.00 -0.01 -0.04 4 |
1312.5 | 0.00 18.61 4.89 11 | -15.68 4.89 11
| 0.00 -0.00 -0.04 4 |
1575.0 | 0.00 13.44 4.89 11 | -24.41 4.89 11
| 0.00 -0.00 -0.04 4 |
1837.5 | 0.00 4.56 4.12 12 | -33.15 4.89 11
| 0.00 -0.06 0.17 1 |
2100.0 | 0.00 0.10 -0.17 2 | -43.45 4.89 11
| 0.00 -3.56 4.12 12 |
2362.5 | 0.00 0.14 -0.17 2 | -51.14 4.89 11
| 0.00 -16.68 4.89 11 |
2625.0 | 0.00 0.17 -0.17 2 | -58.48 4.89 11
| 0.00 -31.11 4.89 11 |
2887.5 | 0.00 0.21 -0.17 2 | -65.99 4.89 11
| 0.00 -47.49 4.89 11 |
3150.0 | 0.00 0.25 -0.17 2 | -72.28 4.89 11
| 0.00 -65.64 4.89 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 434.77
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 493 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 494
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 5.90 MX = 4.89 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 143 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.11 -0.06 1 | 68.23 0.16 11
| 0.00 -64.38 0.20 13 |
258.3 | 0.00 11.26 -0.06 1 | 62.04 0.16 11
| 0.00 -43.99 0.16 11 |
516.7 | 0.00 9.41 -0.06 1 | 54.67 0.16 11
| 0.00 -29.13 0.14 14 |
775.0 | 0.00 0.69 -0.01 7 | 47.47 0.16 11
| 0.00 -21.58 0.20 13 |
1033.3 | 0.00 6.27 0.01 20 | 40.53 0.20 13
| 0.00 -10.87 0.19 21 |
1291.7 | 0.00 8.37 0.06 12 | 32.47 0.20 13
| 0.00 -3.86 0.06 2 |
1550.0 | 0.00 11.36 0.16 11 | 25.63 0.20 13
| 0.00 -2.01 0.06 2 |
1808.3 | 0.00 15.67 0.16 11 | 18.78 0.20 13
| 0.00 -0.17 0.06 2 |
2066.7 | 0.00 17.62 0.16 11 | 12.20 0.19 21
| 0.00 -1.30 -0.01 4 |
2325.0 | 0.00 18.14 0.20 13 | -13.37 0.01 20
| 0.00 -3.53 -0.06 1 |
2583.3 | 0.00 18.58 0.20 13 | -18.25 0.06 12
| 0.00 -5.38 -0.06 1 |
2841.7 | 0.00 17.50 0.20 13 | -24.15 0.06 12
| 0.00 -7.23 -0.06 1 |
3100.0 | 0.00 15.66 0.19 21 | -29.10 0.06 12
| 0.00 -11.58 0.01 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 377.08 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 494 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 495
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 50.68 MX = 0.16 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -17.72 MX = 0.06 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 144 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.40 0.30 3 | 112.12 -6.71 11
| 0.00 -89.69 -6.71 11 |
116.7 | 0.00 8.94 0.30 3 | 109.37 -6.71 11
| 0.00 -72.14 -5.74 15 |
233.3 | 0.00 8.48 0.30 3 | 106.38 -6.71 11
| 0.00 -61.52 -5.74 15 |
350.0 | 0.00 2.95 0.55 2 | 103.42 -6.71 11
| 0.00 -51.94 -6.71 11 |
466.7 | 0.00 7.57 0.30 3 | 100.39 -6.71 11
| 0.00 -40.05 -6.71 11 |
583.3 | 0.00 7.11 0.30 3 | 96.84 -6.71 11
| 0.00 -31.37 -5.74 15 |
700.0 | 0.00 6.65 0.30 3 | 93.61 -6.71 11
| 0.00 -17.42 -6.71 11 |
816.7 | 0.00 2.08 -5.01 14 | 90.37 -6.71 11
| 0.00 -12.80 -5.74 15 |
933.3 | 0.00 3.06 -5.31 17 | 86.82 -6.71 11
| 0.00 -3.98 -5.74 15 |
1050.0 | 0.00 17.21 -5.01 14 | 83.80 -6.71 11
| 0.00 -0.73 -3.16 23 |
1166.7 | 0.00 23.19 -6.71 11 | 80.84 -6.71 11
| 0.00 -4.83 -0.30 4 |
1283.3 | 0.00 32.44 -6.71 11 | 77.84 -6.71 11
| 0.00 -4.37 -0.30 4 |
1400.0 | 0.00 41.36 -6.71 11 | 75.09 -6.71 11
| 0.00 -3.91 -0.30 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 495 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 496
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 620.53 371.39 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 301.57
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 665.0 mm AWAY FROM START SUPPORT
VY = 94.58 MX = -6.71 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 145 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 496 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 497
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.03 -0.06 1 | 49.87 0.52 11
| 0.00 -24.99 0.52 11 |
285.4 | 0.00 0.03 -0.06 1 | 43.04 0.52 11
| 0.00 -11.73 0.52 11 |
570.8 | 0.00 0.03 -0.06 1 | 34.92 0.52 11
| 0.00 -0.59 0.52 11 |
856.3 | 0.00 6.56 0.48 13 | 26.99 0.52 11
| 0.00 -0.02 0.06 2 |
1141.7 | 0.00 14.55 0.52 11 | 16.68 0.52 11
| 0.00 -0.02 0.06 2 |
1427.1 | 0.00 14.45 0.48 13 | 7.65 0.52 11
| 0.00 -0.02 0.06 2 |
1712.5 | 0.00 14.95 0.48 13 | -3.19 0.52 11
| 0.00 -0.02 0.06 2 |
1997.9 | 0.00 16.27 0.52 11 | -14.04 0.52 11
| 0.00 -0.01 0.06 2 |
2283.3 | 0.00 8.71 0.48 13 | -23.06 0.52 11
| 0.00 -0.00 0.00 9 |
2568.8 | 0.00 2.77 0.52 11 | -33.37 0.52 11
| 0.00 -0.01 0.06 2 |
2854.2 | 0.00 0.01 -0.06 1 | -41.30 0.52 11
| 0.00 -7.88 0.52 11 |
3139.6 | 0.00 0.01 -0.06 1 | -49.42 0.52 11
| 0.00 -20.84 0.52 11 |
3425.0 | 0.00 0.00 -0.06 1 | -56.25 0.52 11
| 0.00 -35.92 0.52 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 208.79
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 35.78 MX = 0.52 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 497 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 498
============================================================================
B E A M N O. 146 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3750.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.53 -0.53 2 | 64.31 -0.11 11
| 0.00 -45.07 0.54 12 |
312.5 | 0.00 7.06 -0.53 2 | 56.82 -0.11 11
| 0.00 -28.17 0.54 12 |
625.0 | 0.00 5.59 -0.53 2 | 47.86 -0.11 11
| 0.00 -12.78 0.74 20 |
937.5 | 0.00 9.17 -0.72 13 | 36.95 0.54 12
| 0.00 -1.93 0.25 4 |
1250.0 | 0.00 15.72 -0.11 11 | 27.77 0.54 12
| 0.00 -2.64 0.53 1 |
1562.5 | 0.00 19.64 -0.72 13 | 19.77 0.54 12
| 0.00 -1.17 0.53 1 |
1875.0 | 0.00 26.19 -0.11 11 | 9.84 0.74 20
| 0.00 -0.30 -0.53 2 |
2187.5 | 0.00 25.85 -0.11 11 | -11.94 -0.72 13
| 0.00 -0.06 -0.02 9 |
2500.0 | 0.00 21.37 0.54 12 | -19.94 -0.72 13
| 0.00 -1.51 -0.25 3 |
2812.5 | 0.00 17.25 0.54 12 | -29.11 -0.72 13
| 0.00 -4.72 -0.53 2 |
3125.0 | 0.00 11.82 0.74 20 | -36.11 -0.72 13
| 0.00 -6.76 -0.84 21 |
3437.5 | 0.00 7.67 0.53 1 | -43.28 -0.72 13
| 0.00 -16.65 -0.72 13 |
3750.0 | 0.00 9.14 0.53 1 | -54.52 -0.11 11
| 0.00 -31.11 -0.72 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 262.72 178.50 178.50 178.50 182.19
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 498 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 499
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 50.24 MX = -0.11 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -35.19 MX = -0.72 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 147 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.06 -0.02 20 | 39.36 0.49 11
| 0.00 -15.18 0.60 13 |
287.5 | 0.00 10.62 0.18 12 | 32.77 0.60 13
| 0.00 -7.49 0.50 21 |
575.0 | 0.00 13.71 -0.02 20 | 26.07 0.60 13
| 0.00 -4.86 0.17 2 |
862.5 | 0.00 15.86 0.29 15 | 19.54 0.60 13
| 0.00 -0.30 0.02 8 |
1150.0 | 0.00 20.81 0.49 11 | 12.67 0.60 13
| 0.00 -0.76 0.08 3 |
1437.5 | 0.00 17.07 0.60 13 | -10.32 0.18 12
| 0.00 -0.01 -0.08 4 |
1725.0 | 0.00 18.74 0.49 11 | -18.19 0.18 12
| 0.00 -1.66 -0.17 1 |
2012.5 | 0.00 10.85 0.41 17 | -26.06 0.18 12
| 0.00 -1.54 -0.08 4 |
2300.0 | 0.00 6.33 0.49 14 | -35.79 0.49 11
| 0.00 -5.37 -0.02 20 |
2587.5 | 0.00 6.55 0.17 2 | -44.37 0.49 11
| 0.00 -13.47 0.18 12 |
2875.0 | 0.00 8.18 0.17 2 | -52.54 0.49 11
| 0.00 -26.62 0.18 12 |
3162.5 | 0.00 9.81 0.17 2 | -60.91 0.49 11
| 0.00 -41.67 0.18 12 |
3450.0 | 0.00 11.44 0.17 2 | -67.82 0.49 11
| 0.00 -58.43 0.18 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 340.10
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 499 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 500
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 26.86 MX = 0.60 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 148 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.84 -0.37 2 | 106.60 2.17 11
| 0.00 -108.56 2.17 11 |
208.3 | 0.00 0.20 0.04 4 | 101.63 2.17 11
| 0.00 -86.87 2.17 11 |
416.7 | 0.00 1.59 -0.37 2 | 95.90 2.17 11
| 0.00 -66.27 2.17 11 |
625.0 | 0.00 1.47 -0.37 2 | 90.27 2.17 11
| 0.00 -46.86 2.17 11 |
833.3 | 0.00 0.14 0.04 4 | 84.43 2.17 11
| 0.00 -28.68 2.17 11 |
1041.7 | 0.00 1.22 -0.37 2 | 76.94 2.17 11
| 0.00 -11.85 2.17 11 |
1250.0 | 0.00 4.15 1.29 13 | 70.43 2.17 11
| 0.00 -1.09 0.37 1 |
1458.3 | 0.00 17.49 2.17 11 | 63.93 2.17 11
| 0.00 -0.08 -0.04 3 |
1666.7 | 0.00 30.01 2.17 11 | 56.44 2.17 11
| 0.00 -0.85 0.37 1 |
1875.0 | 0.00 41.18 2.17 11 | 50.59 2.17 11
| 0.00 -0.72 0.37 1 |
2083.3 | 0.00 51.11 2.17 11 | 44.97 2.17 11
| 0.00 -0.60 0.37 1 |
2291.7 | 0.00 59.86 2.17 11 | 39.24 2.17 11
| 0.00 -0.47 0.37 1 |
2500.0 | 0.00 67.52 2.17 11 | 34.27 2.17 11
| 0.00 -0.35 0.37 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 500 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 501
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 708.23 289.61 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 256.23 418.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 10-10í 4-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 535.0 mm AWAY FROM START SUPPORT
VY = 92.66 MX = 2.17 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 149 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 501 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 502
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 19.70 -3.82 11 | -99.92 -3.82 11
| 0.00 -0.84 1.05 2 |
91.7 | 0.00 10.44 -3.82 11 | -102.07 -3.82 11
| 0.00 -0.33 -0.07 4 |
183.3 | 0.00 2.46 -3.98 20 | -104.38 -3.82 11
| 0.00 -0.63 -1.79 13 |
275.0 | 0.00 1.35 -1.05 1 | -106.67 -3.82 11
| 0.00 -8.69 -3.82 11 |
366.7 | 0.00 1.52 -1.05 1 | -108.99 -3.82 11
| 0.00 -18.57 -3.82 11 |
458.3 | 0.00 1.70 -1.05 1 | -111.64 -3.82 11
| 0.00 -28.68 -3.82 11 |
550.0 | 0.00 1.87 -1.05 1 | -114.10 -3.82 11
| 0.00 -39.03 -3.82 11 |
641.7 | 0.00 2.04 -1.05 1 | -116.55 -3.82 11
| 0.00 -49.60 -3.82 11 |
733.3 | 0.00 0.32 0.07 3 | -119.20 -3.82 11
| 0.00 -60.41 -3.82 11 |
825.0 | 0.00 2.38 -1.05 1 | -121.53 -3.82 11
| 0.00 -71.44 -3.82 11 |
916.7 | 0.00 2.55 -1.05 1 | -123.81 -3.82 11
| 0.00 -82.69 -3.82 11 |
1008.3 | 0.00 2.72 -1.05 1 | -126.12 -3.82 11
| 0.00 -94.14 -3.82 11 |
1100.0 | 0.00 2.90 -1.05 1 | -128.27 -3.82 11
| 0.00 -105.80 -3.82 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 258.85 459.33 707.84
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 4-10í 6-10í 10-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 660.0 mm AWAY FROM END SUPPORT
VY = -111.02 MX = -3.82 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 502 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 503
============================================================================
B E A M N O. 150 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 14.57 0.00 1 | 59.69 0.83 11
| 0.00 -52.21 0.66 13 |
264.6 | 0.00 12.51 0.00 1 | 53.34 0.83 11
| 0.00 -37.78 0.66 13 |
529.2 | 0.00 10.46 0.00 1 | 45.76 0.83 11
| 0.00 -24.25 0.42 21 |
793.8 | 0.00 9.96 0.42 20 | 39.99 0.66 13
| 0.00 -8.41 -0.00 2 |
1058.3 | 0.00 11.67 0.42 20 | 33.78 0.66 13
| 0.00 -3.67 0.66 13 |
1322.9 | 0.00 14.53 0.66 12 | 25.45 0.66 13
| 0.00 -0.39 0.00 8 |
1587.5 | 0.00 15.97 0.83 11 | 18.39 0.66 13
| 0.00 -2.25 -0.00 2 |
1852.1 | 0.00 17.72 0.83 11 | 13.50 0.42 21
| 0.00 -0.01 -0.64 3 |
2116.7 | 0.00 16.96 0.83 11 | -15.62 0.66 12
| 0.00 -1.85 0.00 1 |
2381.2 | 0.00 15.80 0.66 13 | -21.83 0.66 12
| 0.00 -3.90 0.00 1 |
2645.8 | 0.00 14.12 0.66 13 | -27.76 0.66 12
| 0.00 -5.96 0.00 1 |
2910.4 | 0.00 13.42 0.42 21 | -33.82 0.66 12
| 0.00 -10.61 0.42 20 |
3175.0 | 0.00 11.85 0.42 21 | -38.90 0.66 12
| 0.00 -17.97 0.66 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 306.89 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 503 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 504
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -27.51 MX = 0.66 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 151 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.18 -0.18 1 | 51.41 1.44 11
| 0.00 -10.53 1.44 11 |
291.7 | 0.00 3.69 1.44 11 | 46.07 1.44 11
| 0.00 -0.09 -0.17 4 |
583.3 | 0.00 16.05 1.44 11 | 38.25 1.44 11
| 0.00 -0.10 -0.18 1 |
875.0 | 0.00 21.17 1.37 13 | 30.39 1.44 11
| 0.00 -0.24 -0.18 1 |
1166.7 | 0.00 33.61 1.44 11 | 19.71 1.44 11
| 0.00 -0.38 -0.18 1 |
1458.3 | 0.00 30.82 1.36 14 | 10.43 1.44 11
| 0.00 -0.52 -0.18 1 |
1750.0 | 0.00 39.71 1.44 11 | -0.19 1.44 11
| 0.00 -0.66 -0.18 1 |
2041.7 | 0.00 30.82 1.36 14 | -10.82 1.44 11
| 0.00 -0.80 -0.18 1 |
2333.3 | 0.00 33.38 1.44 11 | -20.10 1.44 11
| 0.00 -0.94 -0.18 1 |
2625.0 | 0.00 25.77 1.44 11 | -30.78 1.44 11
| 0.00 -1.08 -0.18 1 |
2916.7 | 0.00 15.60 1.44 11 | -38.64 1.44 11
| 0.00 -1.22 -0.18 1 |
3208.3 | 0.00 4.14 1.37 13 | -46.45 1.44 11
| 0.00 -1.36 -0.18 1 |
3500.0 | 0.00 1.50 0.18 2 | -51.80 1.44 11
| 0.00 -11.21 1.44 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 239.59 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 504 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 505
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 152 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.57 -3.67 11 | 35.01 -3.67 11
| 0.00 -0.17 0.39 2 |
289.6 | 0.00 11.95 -3.67 11 | 29.52 -3.67 11
| 0.00 -0.00 -0.00 10 |
579.2 | 0.00 19.49 -3.67 11 | 22.06 -3.67 11
| 0.00 -0.09 -0.39 1 |
868.7 | 0.00 24.79 -3.67 11 | 13.54 -3.67 11
| 0.00 -0.22 -0.39 1 |
1158.3 | 0.00 27.38 -3.67 11 | 4.58 -3.67 11
| 0.00 -0.34 -0.39 1 |
1447.9 | 0.00 26.97 -3.67 11 | -6.58 -3.67 11
| 0.00 -0.47 -0.39 1 |
1737.5 | 0.00 23.54 -3.67 11 | -17.11 -3.67 11
| 0.00 -0.06 -0.04 7 |
2027.1 | 0.00 17.06 -3.67 11 | -27.65 -3.67 11
| 0.00 -0.73 -0.39 1 |
2316.7 | 0.00 7.55 -3.67 11 | -38.80 -3.67 11
| 0.00 -0.08 -0.04 7 |
2606.2 | 0.00 0.99 0.39 2 | -47.77 -3.67 11
| 0.00 -4.94 -3.67 11 |
2895.8 | 0.00 1.12 0.39 2 | -56.29 -3.67 11
| 0.00 -20.15 -3.67 11 |
3185.4 | 0.00 1.25 0.39 2 | -63.74 -3.67 11
| 0.00 -37.61 -3.67 11 |
3475.0 | 0.00 1.38 0.39 2 | -69.24 -3.67 11
| 0.00 -56.90 -3.67 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 366.03
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 505 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 506
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -58.99 MX = -3.67 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 153 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.05 -8.54 20 | -53.14 -12.66 11
| 0.00 -0.40 -12.66 11 |
27.1 | 0.00 0.23 -1.24 1 | -53.25 -12.66 11
| 0.00 -1.20 -11.62 12 |
54.2 | 0.00 0.26 -1.24 1 | -53.37 -12.66 11
| 0.00 -3.28 -12.66 11 |
81.2 | 0.00 0.28 -1.24 1 | -53.50 -12.66 11
| 0.00 -4.73 -12.66 11 |
108.3 | 0.00 0.08 0.14 4 | -53.64 -12.66 11
| 0.00 -6.18 -12.66 11 |
135.4 | 0.00 0.34 -1.24 1 | -53.75 -12.66 11
| 0.00 -6.20 -10.30 14 |
162.5 | 0.00 0.37 -1.24 1 | -53.91 -12.66 11
| 0.00 -9.09 -12.66 11 |
189.6 | 0.00 0.01 0.00 10 | -54.09 -12.66 11
| 0.00 -10.56 -12.66 11 |
216.7 | 0.00 0.43 -1.24 1 | -54.19 -12.66 11
| 0.00 -12.02 -12.66 11 |
243.8 | 0.00 0.45 -1.24 1 | -54.38 -12.66 11
| 0.00 -13.49 -12.66 11 |
270.8 | 0.00 0.48 -1.24 1 | -54.59 -12.66 11
| 0.00 -14.97 -12.66 11 |
297.9 | 0.00 0.51 -1.24 1 | -54.70 -12.66 11
| 0.00 -16.45 -12.66 11 |
325.0 | 0.00 0.54 -1.24 1 | -54.91 -12.66 11
| 0.00 -17.93 -12.66 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 506 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 507
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 194.60 220.70
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 195.60 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 154 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.76 0.04 1 | 69.92 -0.40 11
| 0.00 -62.13 -0.40 11 |
285.4 | 0.00 4.92 0.04 1 | 64.85 -0.40 11
| 0.00 -40.23 -0.37 13 |
570.8 | 0.00 4.09 0.04 1 | 57.43 -0.40 11
| 0.00 -25.47 -0.40 11 |
856.3 | 0.00 3.25 0.04 1 | 48.97 -0.40 11
| 0.00 -12.06 -0.37 13 |
1141.7 | 0.00 4.86 -0.27 12 | 38.90 -0.40 11
| 0.00 -2.84 -0.24 21 |
1427.1 | 0.00 12.06 -0.40 11 | 27.51 -0.40 11
| 0.00 -1.58 -0.04 2 |
1712.5 | 0.00 18.25 -0.40 11 | 15.86 -0.37 13
| 0.00 -0.74 -0.04 2 |
1997.9 | 0.00 16.81 -0.37 13 | 6.19 -0.37 13
| 0.00 -0.09 0.04 1 |
2283.3 | 0.00 20.07 -0.40 11 | -9.95 -0.27 12
| 0.00 -0.08 0.00 7 |
2568.8 | 0.00 16.22 -0.40 11 | -18.12 -0.40 11
| 0.00 -1.76 0.04 1 |
2854.2 | 0.00 10.92 -0.37 13 | -26.58 -0.40 11
| 0.00 -2.60 0.04 1 |
3139.6 | 0.00 6.07 -0.24 21 | -34.00 -0.40 11
| 0.00 -4.24 -0.11 20 |
3425.0 | 0.00 4.27 -0.04 2 | -39.07 -0.40 11
| 0.00 -12.56 -0.27 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 507 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 508
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 365.10 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -24.13 MX = -0.40 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 155 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 200.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 508 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 509
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 3.68 -3.33 1 | 182.51 15.31 11
| 0.00 -131.70 15.31 11 |
16.7 | 0.00 3.47 -3.33 1 | 182.44 15.31 11
| 0.00 -106.11 14.47 14 |
33.3 | 0.00 3.25 -3.33 1 | 182.37 15.31 11
| 0.00 -125.62 15.31 11 |
50.0 | 0.00 3.04 -3.33 1 | 182.30 15.31 11
| 0.00 -101.72 16.25 13 |
66.7 | 0.00 2.83 -3.33 1 | 182.22 15.31 11
| 0.00 -119.54 15.31 11 |
83.3 | 0.00 2.61 -3.33 1 | 182.15 15.31 11
| 0.00 -116.51 15.31 11 |
100.0 | 0.00 1.85 -1.85 4 | 182.06 15.31 11
| 0.00 -113.47 15.31 11 |
116.7 | 0.00 2.19 -3.33 1 | 181.97 15.31 11
| 0.00 -110.44 15.31 11 |
133.3 | 0.00 1.97 -3.33 1 | 181.91 15.31 11
| 0.00 -88.29 16.25 13 |
150.0 | 0.00 1.76 -3.33 1 | 181.81 15.31 11
| 0.00 -104.38 15.31 11 |
166.7 | 0.00 1.55 -3.33 1 | 181.71 15.31 11
| 0.00 -101.35 15.31 11 |
183.3 | 0.00 1.33 -3.33 1 | 181.64 15.31 11
| 0.00 -98.32 15.31 11 |
200.0 | 0.00 1.12 -3.33 1 | 181.53 15.31 11
| 0.00 -95.29 15.31 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 1073.30 828.36 907.73 836.88 761.20
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 10-12í 8-12í 9-12í 8-12í 7-12í
REINF. 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 130 mm c/c @ 130 mm c/c @ 130 mm c/c @ 130 mm c/c @ 80 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 540.1 mm AWAY FROM END SUPPORT
VY = 255.51 MX = 15.31 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 509 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 510
============================================================================
B E A M N O. 158 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.77 -0.02 1 | 38.39 1.83 11
| 0.00 -19.67 1.49 13 |
262.5 | 0.00 8.99 0.87 20 | 33.35 1.83 11
| 0.00 -10.78 1.49 13 |
525.0 | 0.00 10.25 1.44 12 | 26.94 1.83 11
| 0.00 -5.57 0.94 21 |
787.5 | 0.00 13.88 1.44 12 | 20.01 1.83 11
| 0.00 -4.44 0.02 2 |
1050.0 | 0.00 15.98 1.44 12 | 15.17 1.49 13
| 0.00 -0.03 0.00 9 |
1312.5 | 0.00 16.52 1.44 12 | 9.25 1.49 13
| 0.00 -2.21 0.02 2 |
1575.0 | 0.00 17.72 1.83 11 | -6.82 1.44 12
| 0.00 -0.20 0.06 3 |
1837.5 | 0.00 16.18 1.83 11 | -12.73 1.44 12
| 0.00 -0.05 0.06 3 |
2100.0 | 0.00 12.70 1.83 11 | -16.97 1.83 11
| 0.00 -1.12 -0.02 1 |
2362.5 | 0.00 8.49 1.49 13 | -24.36 1.83 11
| 0.00 -2.23 -0.02 1 |
2625.0 | 0.00 3.94 1.49 13 | -31.30 1.83 11
| 0.00 -5.72 0.87 20 |
2887.5 | 0.00 4.45 0.02 2 | -37.70 1.83 11
| 0.00 -12.70 1.44 12 |
3150.0 | 0.00 5.56 0.02 2 | -42.74 1.83 11
| 0.00 -22.51 1.44 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 510 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 511
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 26.98 MX = 1.83 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -30.93 MX = 1.83 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 160 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.02 0.07 2 | 52.05 -2.83 11
| 0.00 -24.36 -2.83 11 |
289.6 | 0.00 0.01 0.07 2 | 46.60 -2.83 11
| 0.00 -10.05 -2.83 11 |
579.2 | 0.00 2.44 -2.83 11 | 38.80 -2.83 11
| 0.00 -0.00 -0.07 1 |
868.7 | 0.00 10.12 -2.27 16 | 30.34 -2.83 11
| 0.00 -0.00 0.01 8 |
1158.3 | 0.00 20.20 -2.83 11 | 22.23 -2.83 11
| 0.00 -0.01 0.07 2 |
1447.9 | 0.00 24.55 -2.83 11 | 8.53 -2.83 11
| 0.00 -0.01 0.07 2 |
1737.5 | 0.00 25.48 -2.83 11 | -2.87 -2.83 11
| 0.00 -0.02 0.07 2 |
2027.1 | 0.00 22.83 -2.83 11 | -15.39 -2.83 11
| 0.00 -0.03 0.07 2 |
2316.7 | 0.00 16.64 -2.83 11 | -29.10 -2.83 11
| 0.00 -0.00 0.01 8 |
2606.2 | 0.00 7.04 -2.83 11 | -37.41 -2.83 11
| 0.00 -0.04 0.07 2 |
2895.8 | 0.00 0.05 -0.07 1 | -47.67 -2.83 11
| 0.00 -5.47 -2.83 11 |
3185.4 | 0.00 0.05 -0.07 1 | -54.98 -2.83 11
| 0.00 -20.43 -2.83 11 |
3475.0 | 0.00 0.06 -0.07 1 | -61.71 -2.83 11
| 0.00 -37.44 -2.83 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 239.73
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 511 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 512
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 39.95 MX = -2.83 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -45.51 MX = -2.83 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 162 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 77.33 -1.67 11 | -94.37 -1.67 11
| 0.00 -0.97 0.63 1 |
122.9 | 0.00 53.62 -2.09 13 | -96.48 -1.67 11
| 0.00 -0.95 0.63 1 |
245.8 | 0.00 43.99 -2.09 13 | -99.13 -1.67 11
| 0.00 -0.93 0.63 1 |
368.8 | 0.00 33.86 -1.57 14 | -101.71 -1.67 11
| 0.00 -0.92 0.63 1 |
491.7 | 0.00 28.57 -1.67 11 | -104.44 -1.67 11
| 0.00 -0.90 0.63 1 |
614.6 | 0.00 15.51 -1.67 11 | -108.31 -1.67 11
| 0.00 -0.88 0.63 1 |
737.5 | 0.00 2.66 -2.09 13 | -111.50 -1.67 11
| 0.00 -0.87 0.63 1 |
860.4 | 0.00 0.80 -0.20 3 | -114.68 -1.67 11
| 0.00 -10.48 -1.09 15 |
983.3 | 0.00 0.83 -0.63 2 | -118.56 -1.67 11
| 0.00 -21.98 -1.09 15 |
1106.3 | 0.00 0.82 -0.63 2 | -121.28 -1.67 11
| 0.00 -40.97 -1.67 11 |
1229.2 | 0.00 0.80 -0.63 2 | -123.86 -1.67 11
| 0.00 -56.05 -1.67 11 |
1352.1 | 0.00 0.78 -0.63 2 | -126.51 -1.67 11
| 0.00 -71.45 -1.67 11 |
1475.0 | 0.00 0.76 -0.63 2 | -128.62 -1.67 11
| 0.00 -87.13 -1.67 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 512 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 513
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 249.35 544.01
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 479.24 206.45 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 4-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 7-10í 3-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 666.4 mm AWAY FROM END SUPPORT
VY = -113.09 MX = -1.67 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 164 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 513 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 514
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 11.02 0.42 2 | 52.30 3.09 11
| 0.00 -43.79 1.97 12 |
258.3 | 0.00 9.46 0.42 2 | 47.51 3.09 11
| 0.00 -25.29 3.09 11 |
516.7 | 0.00 7.91 0.42 2 | 40.93 3.09 11
| 0.00 -20.53 1.97 12 |
775.0 | 0.00 7.22 2.11 21 | 34.21 3.09 11
| 0.00 -10.86 1.97 12 |
1033.3 | 0.00 8.76 2.98 13 | 26.79 3.09 11
| 0.00 -5.90 0.85 20 |
1291.7 | 0.00 9.30 3.09 11 | 17.00 3.09 11
| 0.00 -3.24 -0.42 1 |
1550.0 | 0.00 12.56 3.09 11 | 7.95 3.09 11
| 0.00 -1.69 -0.42 1 |
1808.3 | 0.00 13.41 3.09 11 | -8.11 2.98 13
| 0.00 -0.01 0.18 3 |
2066.7 | 0.00 11.28 1.97 12 | -15.94 2.98 13
| 0.00 -1.42 0.42 2 |
2325.0 | 0.00 10.19 1.97 12 | -21.88 2.98 13
| 0.00 -0.86 2.11 21 |
2583.3 | 0.00 7.54 1.97 12 | -27.25 2.98 13
| 0.00 -5.76 2.11 21 |
2841.7 | 0.00 6.76 0.85 20 | -32.52 2.98 13
| 0.00 -11.12 2.98 13 |
3100.0 | 0.00 7.65 -0.42 1 | -36.40 3.09 11
| 0.00 -20.03 2.98 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 269.13 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 37.38 MX = 3.09 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 514 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 515
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -26.77 MX = 2.98 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 165 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.55 0.10 2 | 28.65 -0.14 12
| 0.00 -22.27 -0.14 12 |
250.0 | 0.00 7.09 0.10 2 | 25.20 -0.14 12
| 0.00 -15.54 -0.14 12 |
500.0 | 0.00 6.82 0.16 21 | 20.87 -0.14 12
| 0.00 -10.07 -0.16 20 |
750.0 | 0.00 6.49 0.16 21 | 16.67 -0.14 12
| 0.00 -4.17 -0.10 1 |
1000.0 | 0.00 5.06 0.11 13 | 12.22 -0.14 12
| 0.00 -2.72 -0.16 20 |
1250.0 | 0.00 3.52 0.16 21 | -9.45 0.16 21
| 0.00 -0.46 0.06 4 |
1500.0 | 0.00 1.73 -0.14 12 | -13.38 0.11 13
| 0.00 -0.22 0.10 2 |
1750.0 | 0.00 2.20 -0.16 20 | -18.60 0.11 13
| 0.00 -2.83 0.16 21 |
2000.0 | 0.00 2.12 -0.16 20 | -24.95 0.11 13
| 0.00 -8.33 0.11 13 |
2250.0 | 0.00 4.60 -0.10 1 | -29.41 0.11 13
| 0.00 -15.09 0.11 13 |
2500.0 | 0.00 6.06 -0.10 1 | -33.61 0.11 13
| 0.00 -23.00 0.11 13 |
2750.0 | 0.00 7.52 -0.10 1 | -38.66 -0.02 11
| 0.00 -31.98 0.11 13 |
3000.0 | 0.00 8.98 -0.10 1 | -42.96 -0.02 11
| 0.00 -41.89 0.11 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 239.60
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 515 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 516
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 20.41 MX = -0.14 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -32.92 MX = 0.11 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 168 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.53 0.25 2 | 54.74 -9.02 11
| 0.00 -22.92 -9.02 11 |
91.7 | 0.00 2.12 -0.09 3 | 53.20 -9.02 11
| 0.00 -17.98 -9.02 11 |
183.3 | 0.00 -8.76 -4.40 23 | 51.42 -9.02 11
| 0.00 -13.18 -9.02 11 |
275.0 | 0.00 1.93 0.25 2 | 49.50 -9.02 11
| 0.00 -9.16 -7.52 12 |
366.7 | 0.00 1.10 -4.68 22 | 47.36 -9.02 11
| 0.00 -5.36 -7.52 12 |
458.3 | 0.00 0.14 -9.02 11 | 45.33 -9.02 11
| 0.00 -1.70 -4.92 20 |
550.0 | 0.00 3.45 -7.22 18 | 42.90 -9.02 11
| 0.00 -0.00 -0.97 6 |
641.7 | 0.00 7.92 -7.33 14 | 40.29 -9.02 11
| 0.00 -1.26 0.09 4 |
733.3 | 0.00 11.60 -9.02 11 | 38.26 -9.02 11
| 0.00 -0.93 -0.25 1 |
825.0 | 0.00 14.97 -9.02 11 | 35.61 -9.02 11
| 0.00 -0.73 -0.25 1 |
916.7 | 0.00 18.14 -9.02 11 | 32.84 -9.02 11
| 0.00 -0.83 0.09 4 |
1008.3 | 0.00 21.07 -9.02 11 | 31.15 -9.02 11
| 0.00 -0.69 0.09 4 |
1100.0 | 0.00 23.77 -9.02 11 | 28.33 -9.02 11
| 0.00 -0.54 0.09 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 516 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 517
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 214.77 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 219.74
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 40.24 MX = -9.02 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 170 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 517 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 518
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.97 0.35 2 | 36.84 0.06 11
| 0.00 -17.45 0.06 11 |
258.3 | 0.00 0.85 0.35 2 | 32.24 0.06 11
| 0.00 -7.85 -0.37 12 |
516.7 | 0.00 0.44 0.54 21 | 25.47 0.06 11
| 0.00 -1.78 -0.50 20 |
775.0 | 0.00 4.53 0.46 13 | 19.00 0.06 11
| 0.00 -0.21 -0.11 4 |
1033.3 | 0.00 8.51 0.06 11 | 8.72 -0.37 12
| 0.00 -0.51 -0.35 1 |
1291.7 | 0.00 9.83 0.06 11 | -1.00 0.54 21
| 0.00 -0.40 -0.35 1 |
1550.0 | 0.00 8.55 0.06 11 | -8.89 0.46 13
| 0.00 -0.02 -0.11 4 |
1808.3 | 0.00 3.74 0.46 13 | -21.22 0.06 11
| 0.00 0.00 0.00 1 |
2066.7 | 0.00 0.06 0.35 2 | -33.00 0.06 11
| 0.00 -1.88 0.46 13 |
2325.0 | 0.00 0.05 -0.35 1 | -41.78 0.06 11
| 0.00 -11.91 0.06 11 |
2583.3 | 0.00 0.17 -0.35 1 | -48.43 0.06 11
| 0.00 -23.58 0.06 11 |
2841.7 | 0.00 0.28 -0.35 1 | -55.93 0.06 11
| 0.00 -37.19 0.06 11 |
3100.0 | 0.00 0.40 -0.35 1 | -61.59 0.06 11
| 0.00 -52.40 0.06 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 302.01
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 26.98 MX = 0.06 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 518 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 519
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -44.12 MX = 0.06 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 172 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 25.96 2.32 11 | 0.50 2.32 11
| 0.00 -0.27 0.07 1 |
208.3 | 0.00 20.83 1.87 14 | -3.22 2.32 11
| 0.00 -0.19 0.07 1 |
416.7 | 0.00 24.52 2.32 11 | -8.01 2.32 11
| 0.00 -0.12 0.07 1 |
625.0 | 0.00 22.32 2.32 11 | -13.00 2.32 11
| 0.00 -0.05 0.07 1 |
833.3 | 0.00 18.92 2.32 11 | -18.51 2.32 11
| 0.00 -0.03 -0.07 2 |
1041.7 | 0.00 14.13 2.32 11 | -27.67 2.32 11
| 0.00 -0.10 -0.07 2 |
1250.0 | 0.00 6.44 1.94 12 | -34.76 2.32 11
| 0.00 -0.18 -0.07 2 |
1458.3 | 0.00 0.40 0.14 6 | -42.16 2.32 11
| 0.00 -0.21 2.32 11 |
1666.7 | 0.00 0.32 0.07 1 | -51.35 2.32 11
| 0.00 -9.86 2.32 11 |
1875.0 | 0.00 0.40 0.07 1 | -57.13 2.32 11
| 0.00 -21.10 2.32 11 |
2083.3 | 0.00 0.47 0.07 1 | -63.57 2.32 11
| 0.00 -33.69 2.32 11 |
2291.7 | 0.00 0.55 0.07 1 | -68.80 2.32 11
| 0.00 -47.51 2.32 11 |
2500.0 | 0.00 0.62 0.07 1 | -73.69 2.32 11
| 0.00 -62.40 2.32 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 386.48
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 519 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 520
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = -11.12 MX = 2.32 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -55.89 MX = 2.32 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 173 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 18.31 0.65 21 | 23.78 -0.07 12
| 0.00 -8.93 -0.30 1 |
245.8 | 0.00 19.95 0.65 13 | 20.27 -0.07 12
| 0.00 -7.41 -0.30 1 |
491.7 | 0.00 20.72 0.65 13 | 15.05 -0.07 12
| 0.00 -0.03 -0.00 10 |
737.5 | 0.00 20.24 0.65 13 | -8.44 0.65 21
| 0.00 -4.39 -0.30 1 |
983.3 | 0.00 18.36 0.65 13 | -11.77 0.65 21
| 0.00 -2.88 -0.30 1 |
1229.2 | 0.00 13.31 0.32 17 | -19.28 0.65 13
| 0.00 -0.12 -0.03 7 |
1475.0 | 0.00 9.33 0.65 13 | -26.22 0.65 13
| 0.00 -0.15 0.30 2 |
1720.8 | 0.00 4.88 0.36 11 | -33.15 0.65 13
| 0.00 -1.66 0.30 2 |
1966.7 | 0.00 3.17 -0.30 1 | -42.29 0.65 13
| 0.00 -7.42 0.65 13 |
2212.5 | 0.00 4.68 -0.30 1 | -50.46 0.36 11
| 0.00 -18.43 0.65 13 |
2458.3 | 0.00 6.19 -0.30 1 | -56.68 0.36 11
| 0.00 -30.84 0.65 13 |
2704.2 | 0.00 7.71 -0.30 1 | -63.20 0.36 11
| 0.00 -44.50 0.65 13 |
2950.0 | 0.00 9.22 -0.30 1 | -67.59 0.36 11
| 0.00 -60.14 0.36 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 520 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 521
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 352.45
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 14.47 MX = -0.07 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 174 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 521 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 522
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.63 -0.17 1 | 48.62 0.44 11
| 0.00 -32.17 0.55 13 |
264.6 | 0.00 7.99 -0.17 1 | 43.90 0.44 11
| 0.00 -19.17 0.47 21 |
529.2 | 0.00 7.48 -0.03 20 | 36.91 0.55 13
| 0.00 -11.60 0.47 21 |
793.8 | 0.00 10.56 0.15 12 | 31.55 0.55 13
| 0.00 -4.94 0.47 21 |
1058.3 | 0.00 10.36 0.35 19 | 24.32 0.55 13
| 0.00 -3.09 0.17 2 |
1322.9 | 0.00 15.45 0.15 12 | 15.82 0.55 13
| 0.00 -1.46 0.17 2 |
1587.5 | 0.00 18.52 0.44 11 | 10.00 0.47 21
| 0.00 -0.18 -0.17 1 |
1852.1 | 0.00 15.74 0.55 13 | -16.35 0.15 12
| 0.00 -1.81 -0.17 1 |
2116.7 | 0.00 14.16 0.55 13 | -24.85 0.15 12
| 0.00 -0.68 -0.04 4 |
2381.2 | 0.00 10.93 0.47 21 | -30.84 0.44 11
| 0.00 -5.08 -0.17 1 |
2645.8 | 0.00 9.56 0.47 21 | -37.54 0.44 11
| 0.00 -10.86 0.15 12 |
2910.4 | 0.00 8.35 0.17 2 | -44.57 0.44 11
| 0.00 -21.55 0.15 12 |
3175.0 | 0.00 9.99 0.17 2 | -49.28 0.44 11
| 0.00 -33.44 0.15 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 187.21 178.08 178.08 178.08 190.76
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 35.07 MX = 0.55 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 522 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 523
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -33.93 MX = 0.44 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 176 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 14.12 -0.33 2 | 32.25 0.13 12
| 0.00 -39.72 0.13 12 |
291.7 | 0.00 11.87 -0.33 2 | 31.16 0.13 12
| 0.00 -30.48 0.13 12 |
583.3 | 0.00 9.61 -0.33 2 | 28.94 0.13 12
| 0.00 -11.77 0.31 15 |
875.0 | 0.00 8.60 -0.49 21 | 26.89 0.13 12
| 0.00 -7.36 0.33 1 |
1166.7 | 0.00 7.50 -0.49 21 | 22.76 0.13 12
| 0.00 -6.13 0.13 12 |
1458.3 | 0.00 5.87 -0.49 21 | 19.75 0.13 12
| 0.00 -2.84 0.33 1 |
1750.0 | 0.00 7.63 -0.34 11 | 14.73 0.49 20
| 0.00 -0.59 0.33 1 |
2041.7 | 0.00 9.15 -0.34 11 | 12.77 0.49 20
| 0.00 -1.67 -0.33 2 |
2333.3 | 0.00 12.13 0.13 12 | -11.97 -0.49 21
| 0.00 -3.93 -0.33 2 |
2625.0 | 0.00 13.87 0.13 12 | -14.15 -0.66 13
| 0.00 -6.23 -0.49 21 |
2916.7 | 0.00 14.84 0.49 20 | -16.20 -0.66 13
| 0.00 -10.48 -0.49 21 |
3208.3 | 0.00 17.02 0.49 20 | -18.41 -0.66 13
| 0.00 -15.06 -0.49 21 |
3500.0 | 0.00 18.92 0.49 20 | -19.50 -0.66 13
| 0.00 -19.93 -0.49 21 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 226.87 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 523 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 524
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 29.87 MX = 0.13 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -15.58 MX = -0.66 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 177 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.67 -0.14 3 | 124.46 1.96 11
| 0.00 -108.12 1.96 11 |
116.7 | 0.00 0.66 0.01 2 | 122.49 1.96 11
| 0.00 -93.71 1.96 11 |
233.3 | 0.00 1.55 -0.14 3 | 120.14 1.96 11
| 0.00 -79.56 1.96 11 |
350.0 | 0.00 0.07 -0.00 8 | 117.56 1.96 11
| 0.00 -65.70 1.96 11 |
466.7 | 0.00 1.43 -0.14 3 | 114.62 1.96 11
| 0.00 -52.14 1.96 11 |
583.3 | 0.00 0.76 0.01 2 | 111.86 1.96 11
| 0.00 -38.92 1.96 11 |
700.0 | 0.00 0.79 0.01 2 | 108.44 1.96 11
| 0.00 -26.09 1.96 11 |
816.7 | 0.00 1.26 -0.14 3 | 104.75 1.96 11
| 0.00 -13.62 1.96 11 |
933.3 | 0.00 0.97 0.90 21 | 101.99 1.96 11
| 0.00 -2.69 1.73 15 |
1050.0 | 0.00 10.08 1.96 11 | 98.23 1.96 11
| 0.00 -1.14 0.14 4 |
1166.7 | 0.00 21.36 1.96 11 | 94.26 1.96 11
| 0.00 -1.09 0.14 4 |
1283.3 | 0.00 32.22 1.96 11 | 92.05 1.96 11
| 0.00 -1.03 0.14 4 |
1400.0 | 0.00 42.67 1.96 11 | 88.01 1.96 11
| 0.00 -0.97 0.14 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 524 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 525
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 702.44 403.45 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 262.34
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 9-10í 6-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 661.7 mm AWAY FROM START SUPPORT
VY = 109.55 MX = 1.96 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 178 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 125.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 525 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 526
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 4.75 0.15 1 | 137.62 16.12 11
| 0.00 -54.03 16.12 11 |
10.4 | 0.00 4.70 0.15 1 | 137.58 16.12 11
| 0.00 -47.72 12.72 13 |
20.8 | 0.00 4.66 0.15 1 | 137.54 16.12 11
| 0.00 -46.52 12.72 13 |
31.3 | 0.00 4.61 0.15 1 | 137.49 16.12 11
| 0.00 -49.73 16.12 11 |
41.7 | 0.00 4.56 0.15 1 | 137.44 16.12 11
| 0.00 -48.30 16.12 11 |
52.1 | 0.00 4.51 0.15 1 | 137.40 16.12 11
| 0.00 -46.87 16.12 11 |
62.5 | 0.00 4.46 0.15 1 | 137.35 16.12 11
| 0.00 -45.44 16.12 11 |
72.9 | 0.00 4.41 0.15 1 | 137.30 16.12 11
| 0.00 -44.01 16.12 11 |
83.3 | 0.00 0.40 0.01 7 | 137.26 16.12 11
| 0.00 -39.30 12.72 13 |
93.8 | 0.00 4.32 0.15 1 | 137.21 16.12 11
| 0.00 -41.15 16.12 11 |
104.2 | 0.00 4.27 0.15 1 | 137.15 16.12 11
| 0.00 -39.72 16.12 11 |
114.6 | 0.00 4.22 0.15 1 | 137.11 16.12 11
| 0.00 -38.29 16.12 11 |
125.0 | 0.00 4.17 0.15 1 | 137.05 16.12 11
| 0.00 -36.86 16.12 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 482.58 450.10 422.77 395.75 369.02
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 7-10í 6-10í 6-10í 6-10í 5-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 145 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = 253.21 MX = 16.12 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 526 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 527
============================================================================
B E A M N O. 179 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.92 0.34 1 | 36.71 -1.44 11
| 0.00 -5.08 -1.56 13 |
262.5 | 0.00 4.05 -1.44 11 | 31.84 -1.44 11
| 0.00 -0.01 -0.00 9 |
525.0 | 0.00 11.61 -1.44 11 | 25.06 -1.44 11
| 0.00 -0.93 -0.34 2 |
787.5 | 0.00 15.00 -0.74 12 | 18.08 -1.44 11
| 0.00 -0.25 -0.08 3 |
1050.0 | 0.00 17.18 -1.06 15 | 10.42 -1.44 11
| 0.00 -0.94 -0.34 2 |
1312.5 | 0.00 22.47 -1.44 11 | 0.09 -1.56 13
| 0.00 -0.94 -0.34 2 |
1575.0 | 0.00 17.61 -1.06 15 | -8.58 -1.44 11
| 0.00 -0.95 -0.34 2 |
1837.5 | 0.00 17.97 -1.44 11 | -17.29 -1.44 11
| 0.00 -0.95 -0.34 2 |
2100.0 | 0.00 10.78 -0.74 12 | -27.57 -1.44 11
| 0.00 -0.96 -0.34 2 |
2362.5 | 0.00 3.83 -1.44 11 | -35.24 -1.44 11
| 0.00 -0.36 -1.36 21 |
2625.0 | 0.00 0.97 0.34 1 | -42.21 -1.44 11
| 0.00 -6.28 -1.56 13 |
2887.5 | 0.00 0.97 0.34 1 | -49.00 -1.44 11
| 0.00 -18.46 -1.44 11 |
3150.0 | 0.00 0.97 0.34 1 | -53.87 -1.44 11
| 0.00 -31.98 -1.44 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 194.59
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 527 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 528
============================================================================
B E A M N O. 180 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.00 -0.34 1 | 51.71 4.34 11
| 0.00 -32.34 4.34 11 |
258.3 | 0.00 1.71 -0.34 1 | 46.91 4.34 11
| 0.00 -17.71 3.88 13 |
516.7 | 0.00 1.41 -0.34 1 | 40.24 4.34 11
| 0.00 -8.24 4.34 11 |
775.0 | 0.00 1.36 4.34 11 | 33.46 4.34 11
| 0.00 -0.90 2.71 22 |
1033.3 | 0.00 8.98 4.34 11 | 25.94 4.34 11
| 0.00 -0.46 0.32 3 |
1291.7 | 0.00 14.43 4.34 11 | 15.88 4.34 11
| 0.00 -0.51 0.34 2 |
1550.0 | 0.00 17.52 4.34 11 | 7.35 4.34 11
| 0.00 -0.21 0.34 2 |
1808.3 | 0.00 18.23 4.34 11 | -1.18 4.34 11
| 0.00 -0.12 0.32 3 |
2066.7 | 0.00 16.58 4.34 11 | -11.24 4.34 11
| 0.00 -0.38 -0.34 1 |
2325.0 | 0.00 12.75 4.34 11 | -18.76 4.34 11
| 0.00 -0.68 -0.34 1 |
2583.3 | 0.00 6.95 4.34 11 | -25.54 4.34 11
| 0.00 -0.98 -0.34 1 |
2841.7 | 0.00 1.06 3.88 13 | -32.21 4.34 11
| 0.00 -0.60 4.34 11 |
3100.0 | 0.00 1.58 0.34 2 | -37.01 4.34 11
| 0.00 -9.56 4.34 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 224.30 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 528 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 529
============================================================================
B E A M N O. 181 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 16.47 5.06 11 | 19.87 5.06 11
| 0.00 -0.28 -0.16 2 |
262.5 | 0.00 16.96 4.24 12 | 13.58 5.06 11
| 0.00 -0.23 -0.16 2 |
525.0 | 0.00 23.48 5.06 11 | 6.07 5.06 11
| 0.00 -0.01 -0.04 4 |
787.5 | 0.00 24.16 5.06 11 | -1.27 5.06 11
| 0.00 -0.13 -0.16 2 |
1050.0 | 0.00 22.77 5.06 11 | -8.96 5.06 11
| 0.00 -0.08 -0.16 2 |
1312.5 | 0.00 19.11 5.06 11 | -19.26 5.06 11
| 0.00 -0.03 -0.16 2 |
1575.0 | 0.00 13.00 5.06 11 | -28.00 5.06 11
| 0.00 -0.00 -0.04 4 |
1837.5 | 0.00 4.41 5.06 11 | -36.73 5.06 11
| 0.00 -0.00 -0.04 4 |
2100.0 | 0.00 0.12 -0.16 2 | -47.03 5.06 11
| 0.00 -6.63 5.06 11 |
2362.5 | 0.00 0.17 -0.16 2 | -54.72 5.06 11
| 0.00 -19.93 5.06 11 |
2625.0 | 0.00 0.22 -0.16 2 | -62.06 5.06 11
| 0.00 -35.31 5.06 11 |
2887.5 | 0.00 0.26 -0.16 2 | -69.57 5.06 11
| 0.00 -52.63 5.06 11 |
3150.0 | 0.00 0.31 -0.16 2 | -75.86 5.06 11
| 0.00 -71.72 5.06 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 479.13
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 183.80 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 529 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 530
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 2.32 MX = 5.06 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 182 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.84 -0.06 1 | 73.69 0.29 11
| 0.00 -71.23 0.31 13 |
258.3 | 0.00 5.89 0.01 4 | 67.50 0.29 11
| 0.00 -51.54 0.29 11 |
516.7 | 0.00 9.23 -0.06 1 | 60.13 0.29 11
| 0.00 -35.01 0.29 11 |
775.0 | 0.00 7.42 -0.06 1 | 52.93 0.29 11
| 0.00 -25.20 0.31 13 |
1033.3 | 0.00 5.62 -0.06 1 | 45.38 0.29 11
| 0.00 -12.91 0.31 13 |
1291.7 | 0.00 7.01 0.08 20 | 36.64 0.31 13
| 0.00 -4.42 0.26 21 |
1550.0 | 0.00 11.10 0.17 12 | 29.79 0.31 13
| 0.00 -0.80 -0.01 3 |
1808.3 | 0.00 16.58 0.29 11 | 22.95 0.31 13
| 0.00 -0.20 0.06 2 |
2066.7 | 0.00 17.88 0.31 13 | 14.89 0.31 13
| 0.00 -1.61 -0.06 1 |
2325.0 | 0.00 21.11 0.29 11 | 10.63 0.26 21
| 0.00 -3.41 -0.06 1 |
2583.3 | 0.00 22.49 0.31 13 | -14.33 0.08 20
| 0.00 -5.22 -0.06 1 |
2841.7 | 0.00 22.49 0.31 13 | -19.58 0.17 12
| 0.00 -7.02 -0.06 1 |
3100.0 | 0.00 21.12 0.31 13 | -24.53 0.17 12
| 0.00 -8.83 -0.06 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 422.29 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 530 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 531
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 56.14 MX = 0.29 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -13.97 MX = 0.08 LD= 20
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 183 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.40 0.27 3 | 111.91 -6.76 11
| 0.00 -88.78 -6.76 11 |
116.7 | 0.00 7.04 0.27 3 | 109.15 -6.76 11
| 0.00 -75.88 -6.76 11 |
233.3 | 0.00 6.68 0.27 3 | 106.16 -6.76 11
| 0.00 -63.32 -6.76 11 |
350.0 | 0.00 6.32 0.27 3 | 103.20 -6.76 11
| 0.00 -44.01 -6.09 12 |
466.7 | 0.00 2.43 0.57 2 | 100.17 -6.76 11
| 0.00 -39.24 -6.76 11 |
583.3 | 0.00 2.25 0.57 2 | 96.62 -6.76 11
| 0.00 -28.92 -5.73 15 |
700.0 | 0.00 5.24 0.27 3 | 93.39 -6.76 11
| 0.00 -19.62 -5.73 15 |
816.7 | 0.00 1.07 -5.09 14 | 90.15 -6.76 11
| 0.00 -10.63 -5.73 15 |
933.3 | 0.00 8.89 -5.09 14 | 86.61 -6.76 11
| 0.00 -4.23 -3.12 23 |
1050.0 | 0.00 14.27 -6.76 11 | 83.58 -6.76 11
| 0.00 -4.15 -0.27 4 |
1166.7 | 0.00 23.84 -6.76 11 | 80.62 -6.76 11
| 0.00 -3.79 -0.27 4 |
1283.3 | 0.00 33.07 -6.76 11 | 77.62 -6.76 11
| 0.00 -3.43 -0.27 4 |
1400.0 | 0.00 41.96 -6.76 11 | 74.87 -6.76 11
| 0.00 -3.07 -0.27 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 531 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 532
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 614.74 315.57 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 305.66
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 665.0 mm AWAY FROM START SUPPORT
VY = 94.36 MX = -6.76 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 184 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 532 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 533
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.03 -0.06 1 | 49.87 0.57 11
| 0.00 -25.00 0.57 11 |
285.4 | 0.00 0.03 -0.06 1 | 43.04 0.57 11
| 0.00 -11.74 0.57 11 |
570.8 | 0.00 0.01 -0.00 4 | 34.92 0.57 11
| 0.00 -0.60 0.57 11 |
856.3 | 0.00 8.23 0.57 11 | 26.99 0.57 11
| 0.00 -0.00 0.01 8 |
1141.7 | 0.00 14.54 0.57 11 | 16.68 0.57 11
| 0.00 -0.00 0.01 8 |
1427.1 | 0.00 18.08 0.57 11 | 7.65 0.57 11
| 0.00 -0.02 0.06 2 |
1712.5 | 0.00 18.70 0.57 11 | -3.19 0.57 11
| 0.00 -0.02 0.06 2 |
1997.9 | 0.00 16.26 0.57 11 | -14.04 0.57 11
| 0.00 -0.01 0.06 2 |
2283.3 | 0.00 8.71 0.52 13 | -23.07 0.57 11
| 0.00 -0.00 0.01 8 |
2568.8 | 0.00 2.76 0.57 11 | -33.37 0.57 11
| 0.00 -0.01 0.06 2 |
2854.2 | 0.00 0.01 -0.06 1 | -41.31 0.57 11
| 0.00 -7.89 0.57 11 |
3139.6 | 0.00 0.00 -0.06 1 | -49.42 0.57 11
| 0.00 -20.85 0.57 11 |
3425.0 | 0.00 0.00 -0.06 1 | -56.25 0.57 11
| 0.00 -35.93 0.57 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 209.41
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 35.78 MX = 0.57 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 533 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 534
============================================================================
B E A M N O. 185 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3750.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.19 -0.50 2 | 65.89 0.08 11
| 0.00 -47.01 0.67 12 |
312.5 | 0.00 6.77 -0.50 2 | 58.40 0.08 11
| 0.00 -27.07 0.08 11 |
625.0 | 0.00 2.60 -0.70 21 | 49.45 0.08 11
| 0.00 -14.61 0.67 12 |
937.5 | 0.00 7.69 -0.70 21 | 37.99 0.67 12
| 0.00 -4.15 0.81 20 |
1250.0 | 0.00 14.84 -0.54 13 | 28.81 0.67 12
| 0.00 -0.23 0.05 7 |
1562.5 | 0.00 19.20 -0.54 13 | 20.81 0.67 12
| 0.00 -1.12 0.50 1 |
1875.0 | 0.00 26.22 0.08 11 | 10.40 0.81 20
| 0.00 -0.29 -0.50 2 |
2187.5 | 0.00 23.15 0.67 12 | -10.44 -0.54 13
| 0.00 -1.71 -0.50 2 |
2500.0 | 0.00 22.03 0.67 12 | -18.45 -0.54 13
| 0.00 -3.12 -0.50 2 |
2812.5 | 0.00 18.23 0.67 12 | -27.62 -0.54 13
| 0.00 -4.54 -0.50 2 |
3125.0 | 0.00 12.51 0.81 20 | -34.62 -0.54 13
| 0.00 -5.95 -0.50 2 |
3437.5 | 0.00 8.15 0.81 20 | -45.45 0.08 11
| 0.00 -14.29 -0.54 13 |
3750.0 | 0.00 8.78 0.50 1 | -52.94 0.08 11
| 0.00 -28.29 -0.54 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 275.65 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 534 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 535
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 51.83 MX = 0.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -33.70 MX = -0.54 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 186 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.94 -0.05 20 | 37.44 0.40 11
| 0.00 -13.34 0.44 21 |
287.5 | 0.00 11.98 0.13 12 | 30.93 0.52 13
| 0.00 -5.91 0.44 21 |
575.0 | 0.00 16.22 0.13 12 | 24.23 0.52 13
| 0.00 -4.64 0.16 2 |
862.5 | 0.00 18.55 0.13 12 | 17.70 0.52 13
| 0.00 -1.47 0.08 3 |
1150.0 | 0.00 21.30 0.40 11 | 10.83 0.52 13
| 0.00 -1.52 0.16 2 |
1437.5 | 0.00 21.23 0.40 11 | -11.56 0.13 12
| 0.00 -0.00 -0.08 4 |
1725.0 | 0.00 18.12 0.40 11 | -19.43 0.13 12
| 0.00 -1.59 -0.16 1 |
2012.5 | 0.00 13.33 0.52 13 | -25.99 0.40 11
| 0.00 -3.15 -0.16 1 |
2300.0 | 0.00 7.83 0.52 13 | -37.71 0.40 11
| 0.00 -5.98 -0.05 20 |
2587.5 | 0.00 6.27 0.16 2 | -46.30 0.40 11
| 0.00 -14.96 0.13 12 |
2875.0 | 0.00 7.83 0.16 2 | -54.46 0.40 11
| 0.00 -28.46 0.13 12 |
3162.5 | 0.00 9.39 0.16 2 | -62.83 0.40 11
| 0.00 -43.87 0.13 12 |
3450.0 | 0.00 10.94 0.16 2 | -69.74 0.40 11
| 0.00 -60.99 0.13 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 355.29
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 535 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 536
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 25.03 MX = 0.52 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 187 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.77 -0.35 2 | 108.83 1.91 11
| 0.00 -113.64 1.91 11 |
208.3 | 0.00 1.65 -0.35 2 | 103.86 1.91 11
| 0.00 -75.17 1.96 12 |
416.7 | 0.00 0.15 -0.03 8 | 98.13 1.91 11
| 0.00 -70.42 1.91 11 |
625.0 | 0.00 0.14 -0.03 8 | 92.50 1.91 11
| 0.00 -40.60 1.57 16 |
833.3 | 0.00 0.13 -0.03 8 | 86.66 1.91 11
| 0.00 -31.91 1.91 11 |
1041.7 | 0.00 1.17 -0.35 2 | 79.17 1.91 11
| 0.00 -14.61 1.91 11 |
1250.0 | 0.00 1.25 1.91 11 | 72.66 1.91 11
| 0.00 -0.26 1.96 12 |
1458.3 | 0.00 15.67 1.91 11 | 66.16 1.91 11
| 0.00 -0.94 0.35 1 |
1666.7 | 0.00 28.65 1.91 11 | 58.67 1.91 11
| 0.00 -0.08 0.03 7 |
1875.0 | 0.00 40.28 1.91 11 | 52.82 1.91 11
| 0.00 -0.70 0.35 1 |
2083.3 | 0.00 50.68 1.91 11 | 47.20 1.91 11
| 0.00 -0.58 0.35 1 |
2291.7 | 0.00 59.89 1.91 11 | 41.47 1.91 11
| 0.00 -0.46 0.35 1 |
2500.0 | 0.00 68.01 1.91 11 | 36.50 1.91 11
| 0.00 -0.34 0.35 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 536 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 537
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 746.23 246.20 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 248.30 418.70
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 10-10í 4-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 535.0 mm AWAY FROM START SUPPORT
VY = 94.89 MX = 1.91 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 188 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 537 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 538
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 22.05 -3.63 11 | -98.66 -3.63 11
| 0.00 -0.79 0.88 2 |
91.7 | 0.00 12.91 -3.63 11 | -100.81 -3.63 11
| 0.00 -0.94 0.88 2 |
183.3 | 0.00 4.17 -3.96 12 | -103.12 -3.63 11
| 0.00 -1.10 0.88 2 |
275.0 | 0.00 1.26 -0.88 1 | -105.41 -3.63 11
| 0.00 -5.99 -3.63 11 |
366.7 | 0.00 0.12 -0.02 7 | -107.73 -3.63 11
| 0.00 -15.77 -3.63 11 |
458.3 | 0.00 0.40 0.04 3 | -110.38 -3.63 11
| 0.00 -25.76 -3.63 11 |
550.0 | 0.00 1.74 -0.88 1 | -112.84 -3.63 11
| 0.00 -35.99 -3.63 11 |
641.7 | 0.00 1.90 -0.88 1 | -115.29 -3.63 11
| 0.00 -46.45 -3.63 11 |
733.3 | 0.00 2.05 -0.88 1 | -117.94 -3.63 11
| 0.00 -57.14 -3.63 11 |
825.0 | 0.00 2.21 -0.88 1 | -120.27 -3.63 11
| 0.00 -68.05 -3.63 11 |
916.7 | 0.00 2.37 -0.88 1 | -122.55 -3.63 11
| 0.00 -79.18 -3.63 11 |
1008.3 | 0.00 2.53 -0.88 1 | -124.86 -3.63 11
| 0.00 -90.53 -3.63 11 |
1100.0 | 0.00 2.69 -0.88 1 | -127.01 -3.63 11
| 0.00 -102.07 -3.63 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 239.52 436.90 663.51
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 4-12í 6-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -109.76 MX = -3.63 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 538 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 539
============================================================================
B E A M N O. 189 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 14.19 -0.04 1 | 62.29 0.96 11
| 0.00 -55.70 0.81 13 |
264.6 | 0.00 12.19 -0.04 1 | 55.95 0.96 11
| 0.00 -40.79 0.81 13 |
529.2 | 0.00 10.19 -0.04 1 | 48.37 0.96 11
| 0.00 -27.31 0.81 13 |
793.8 | 0.00 8.12 0.43 20 | 40.96 0.96 11
| 0.00 -16.45 0.55 21 |
1058.3 | 0.00 6.19 -0.04 1 | 35.62 0.81 13
| 0.00 -8.31 0.55 21 |
1322.9 | 0.00 11.22 0.43 20 | 27.29 0.81 13
| 0.00 -4.20 0.04 2 |
1587.5 | 0.00 15.18 0.96 11 | 20.23 0.81 13
| 0.00 -0.13 -0.46 3 |
1852.1 | 0.00 17.61 0.96 11 | 13.17 0.81 13
| 0.00 -0.02 -0.46 3 |
2116.7 | 0.00 16.19 0.81 13 | -13.29 0.72 12
| 0.00 -1.80 -0.04 1 |
2381.2 | 0.00 16.68 0.81 13 | -19.50 0.72 12
| 0.00 -3.80 -0.04 1 |
2645.8 | 0.00 15.50 0.81 13 | -25.43 0.72 12
| 0.00 -5.79 -0.04 1 |
2910.4 | 0.00 14.49 0.55 21 | -31.49 0.72 12
| 0.00 -8.89 0.43 20 |
3175.0 | 0.00 13.21 0.55 21 | -36.57 0.72 12
| 0.00 -16.16 0.43 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 330.59 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 539 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 540
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -25.18 MX = 0.72 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 190 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.18 -0.18 1 | 51.20 1.60 11
| 0.00 -9.80 1.60 11 |
291.7 | 0.00 3.63 1.46 14 | 45.85 1.60 11
| 0.00 -0.05 0.18 2 |
583.3 | 0.00 16.65 1.60 11 | 38.03 1.60 11
| 0.00 -0.15 -0.15 4 |
875.0 | 0.00 26.65 1.60 11 | 30.17 1.60 11
| 0.00 -0.22 -0.18 1 |
1166.7 | 0.00 34.08 1.60 11 | 19.49 1.60 11
| 0.00 -0.35 -0.18 1 |
1458.3 | 0.00 38.57 1.60 11 | 10.22 1.60 11
| 0.00 0.00 0.00 1 |
1750.0 | 0.00 32.78 1.49 13 | -0.41 1.60 11
| 0.00 -0.62 -0.18 1 |
2041.7 | 0.00 38.33 1.60 11 | -11.04 1.60 11
| 0.00 -0.75 -0.18 1 |
2333.3 | 0.00 27.94 1.49 13 | -20.32 1.60 11
| 0.00 -0.89 -0.18 1 |
2625.0 | 0.00 25.93 1.60 11 | -31.00 1.60 11
| 0.00 -1.02 -0.18 1 |
2916.7 | 0.00 15.69 1.60 11 | -38.85 1.60 11
| 0.00 -1.15 -0.18 1 |
3208.3 | 0.00 4.07 1.49 13 | -46.67 1.60 11
| 0.00 -1.29 -0.18 1 |
3500.0 | 0.00 1.42 0.18 2 | -52.02 1.60 11
| 0.00 -11.24 1.60 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 199.34 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 540 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 541
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 191 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.01 -4.13 11 | 36.06 -4.13 11
| 0.00 -0.15 0.37 2 |
289.6 | 0.00 11.69 -4.13 11 | 30.56 -4.13 11
| 0.00 -0.02 0.37 2 |
579.2 | 0.00 19.53 -4.13 11 | 23.11 -4.13 11
| 0.00 -0.10 -0.37 1 |
868.7 | 0.00 25.13 -4.13 11 | 14.59 -4.13 11
| 0.00 -0.22 -0.37 1 |
1158.3 | 0.00 28.02 -4.13 11 | 5.62 -4.13 11
| 0.00 -0.35 -0.37 1 |
1447.9 | 0.00 27.92 -4.13 11 | -5.53 -4.13 11
| 0.00 -0.47 -0.37 1 |
1737.5 | 0.00 24.80 -4.13 11 | -16.07 -4.13 11
| 0.00 -0.60 -0.37 1 |
2027.1 | 0.00 18.62 -4.13 11 | -26.60 -4.13 11
| 0.00 -0.72 -0.37 1 |
2316.7 | 0.00 9.41 -4.13 11 | -37.76 -4.13 11
| 0.00 -0.84 -0.37 1 |
2606.2 | 0.00 0.97 0.37 2 | -46.72 -4.13 11
| 0.00 -2.78 -4.13 11 |
2895.8 | 0.00 1.09 0.37 2 | -55.24 -4.13 11
| 0.00 -17.69 -4.13 11 |
3185.4 | 0.00 1.21 0.37 2 | -62.70 -4.13 11
| 0.00 -34.84 -4.13 11 |
3475.0 | 0.00 1.34 0.37 2 | -68.19 -4.13 11
| 0.00 -53.83 -4.13 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 351.77
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 180.53 178.56 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 541 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 542
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -57.95 MX = -4.13 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 192 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.17 -13.37 12 | -51.96 -14.94 11
| 0.00 -0.09 -14.94 11 |
27.1 | 0.00 0.23 -1.18 1 | -52.07 -14.94 11
| 0.00 -1.50 -14.94 11 |
54.2 | 0.00 0.26 -1.18 1 | -52.18 -14.94 11
| 0.00 -2.43 -12.18 14 |
81.2 | 0.00 0.08 0.19 4 | -52.31 -14.94 11
| 0.00 -4.33 -14.94 11 |
108.3 | 0.00 0.31 -1.18 1 | -52.46 -14.94 11
| 0.00 -5.75 -14.94 11 |
135.4 | 0.00 0.07 0.19 4 | -52.57 -14.94 11
| 0.00 -7.17 -14.94 11 |
162.5 | 0.00 0.37 -1.18 1 | -52.73 -14.94 11
| 0.00 -8.60 -14.94 11 |
189.6 | 0.00 0.39 -1.18 1 | -52.90 -14.94 11
| 0.00 -10.03 -14.94 11 |
216.7 | 0.00 0.42 -1.18 1 | -53.01 -14.94 11
| 0.00 -11.46 -14.94 11 |
243.8 | 0.00 0.45 -1.18 1 | -53.20 -14.94 11
| 0.00 -12.90 -14.94 11 |
270.8 | 0.00 0.48 -1.18 1 | -53.40 -14.94 11
| 0.00 -14.34 -14.94 11 |
297.9 | 0.00 0.50 -1.18 1 | -53.51 -14.94 11
| 0.00 -15.79 -14.94 11 |
325.0 | 0.00 0.53 -1.18 1 | -53.73 -14.94 11
| 0.00 -17.24 -14.94 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 542 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 543
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 187.43 212.60 238.23
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 266.12 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 193 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.36 0.04 1 | 73.25 -0.44 11
| 0.00 -68.15 -0.44 11 |
285.4 | 0.00 4.58 0.04 1 | 68.18 -0.44 11
| 0.00 -47.97 -0.44 11 |
570.8 | 0.00 3.81 0.04 1 | 60.76 -0.44 11
| 0.00 -29.59 -0.44 11 |
856.3 | 0.00 0.28 0.00 7 | 52.30 -0.44 11
| 0.00 -14.34 -0.40 13 |
1141.7 | 0.00 2.91 -0.30 12 | 42.23 -0.44 11
| 0.00 -3.70 -0.26 21 |
1427.1 | 0.00 10.43 -0.30 12 | 30.83 -0.44 11
| 0.00 -0.15 -0.00 3 |
1712.5 | 0.00 17.93 -0.44 11 | 18.75 -0.44 11
| 0.00 -0.72 -0.04 2 |
1997.9 | 0.00 17.30 -0.35 15 | 8.59 -0.40 13
| 0.00 -0.06 0.04 1 |
2283.3 | 0.00 21.65 -0.44 11 | -7.03 -0.30 12
| 0.00 -0.83 0.04 1 |
2568.8 | 0.00 18.75 -0.44 11 | -14.79 -0.44 11
| 0.00 -1.60 0.04 1 |
2854.2 | 0.00 13.44 -0.40 13 | -23.25 -0.44 11
| 0.00 -2.38 0.04 1 |
3139.6 | 0.00 8.22 -0.40 13 | -30.67 -0.44 11
| 0.00 -3.15 0.04 1 |
3425.0 | 0.00 4.65 -0.26 21 | -35.74 -0.44 11
| 0.00 -7.84 -0.30 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 543 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 544
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 404.18 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -20.81 MX = -0.44 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 194 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 200.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 544 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 545
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 3.00 -3.27 1 | 200.68 17.59 11
| 0.00 -140.04 17.59 11 |
16.7 | 0.00 2.85 -3.27 1 | 200.61 17.59 11
| 0.00 -112.78 18.00 13 |
33.3 | 0.00 2.70 -3.27 1 | 200.54 17.59 11
| 0.00 -133.35 17.59 11 |
50.0 | 0.00 1.84 -1.81 4 | 200.47 17.59 11
| 0.00 -130.01 17.59 11 |
66.7 | 0.00 1.75 -1.81 4 | 200.39 17.59 11
| 0.00 -126.67 17.59 11 |
83.3 | 0.00 2.26 -3.27 1 | 200.32 17.59 11
| 0.00 -123.33 17.59 11 |
100.0 | 0.00 2.12 -3.27 1 | 200.23 17.59 11
| 0.00 -119.99 17.59 11 |
116.7 | 0.00 1.97 -3.27 1 | 200.14 17.59 11
| 0.00 -116.66 17.59 11 |
133.3 | 0.00 1.83 -3.27 1 | 200.08 17.59 11
| 0.00 -92.85 18.00 13 |
150.0 | 0.00 1.68 -3.27 1 | 199.98 17.59 11
| 0.00 -109.99 17.59 11 |
166.7 | 0.00 1.53 -3.27 1 | 199.88 17.59 11
| 0.00 -106.66 17.59 11 |
183.3 | 0.00 1.39 -3.27 1 | 199.81 17.59 11
| 0.00 -103.33 17.59 11 |
200.0 | 0.00 1.24 -3.27 1 | 199.70 17.59 11
| 0.00 -100.00 17.59 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 1165.45 1077.20 974.21 895.32 819.25
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 6-16í 6-16í 5-16í 5-16í 5-16í
REINF. 2 layer(s) 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 115 mm c/c @ 115 mm c/c @ 115 mm c/c @ 115 mm c/c @ 115 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 542.0 mm AWAY FROM END SUPPORT
VY = 280.95 MX = 17.59 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 545 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 546
============================================================================
B E A M N O. 197 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.68 -0.03 1 | 38.87 1.81 11
| 0.00 -18.81 1.48 13 |
262.5 | 0.00 3.74 1.41 12 | 33.83 1.81 11
| 0.00 -10.01 1.48 13 |
525.0 | 0.00 9.09 1.41 12 | 27.43 1.81 11
| 0.00 -4.78 0.03 2 |
787.5 | 0.00 10.53 1.81 11 | 20.49 1.81 11
| 0.00 -0.17 0.94 21 |
1050.0 | 0.00 14.93 1.81 11 | 13.10 1.81 11
| 0.00 -0.42 0.07 3 |
1312.5 | 0.00 16.25 1.41 12 | 8.89 1.48 13
| 0.00 -1.94 0.03 2 |
1575.0 | 0.00 15.54 1.41 12 | -5.68 1.41 12
| 0.00 -0.18 0.07 3 |
1837.5 | 0.00 16.51 1.81 11 | -9.09 1.81 11
| 0.00 -0.06 0.07 3 |
2100.0 | 0.00 11.60 1.48 13 | -16.48 1.81 11
| 0.00 -0.90 -0.03 1 |
2362.5 | 0.00 8.50 1.48 13 | -23.88 1.81 11
| 0.00 -1.84 -0.03 1 |
2625.0 | 0.00 3.86 1.48 13 | -30.81 1.81 11
| 0.00 -4.65 0.85 20 |
2887.5 | 0.00 3.74 0.03 2 | -37.22 1.81 11
| 0.00 -11.17 1.41 12 |
3150.0 | 0.00 4.68 0.03 2 | -42.26 1.81 11
| 0.00 -20.68 1.41 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 546 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 547
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 27.47 MX = 1.81 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -30.44 MX = 1.81 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 199 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.01 -0.07 1 | 51.87 -2.81 11
| 0.00 -24.02 -2.81 11 |
289.6 | 0.00 0.01 -0.07 1 | 46.42 -2.81 11
| 0.00 -7.81 -2.25 16 |
579.2 | 0.00 2.67 -2.81 11 | 38.63 -2.81 11
| 0.00 -0.01 0.07 2 |
868.7 | 0.00 10.27 -2.33 12 | 30.16 -2.81 11
| 0.00 -0.00 0.07 2 |
1158.3 | 0.00 20.33 -2.81 11 | 22.05 -2.81 11
| 0.00 -0.00 0.07 2 |
1447.9 | 0.00 19.71 -2.25 14 | 8.35 -2.81 11
| 0.00 -0.00 0.01 8 |
1737.5 | 0.00 25.51 -2.81 11 | -3.04 -2.81 11
| 0.00 -0.00 0.01 8 |
2027.1 | 0.00 22.81 -2.81 11 | -15.57 -2.81 11
| 0.00 -0.00 0.01 8 |
2316.7 | 0.00 16.56 -2.81 11 | -29.28 -2.81 11
| 0.00 -0.00 -0.07 1 |
2606.2 | 0.00 6.91 -2.81 11 | -37.59 -2.81 11
| 0.00 -0.00 -0.07 1 |
2895.8 | 0.00 0.00 0.07 2 | -47.85 -2.81 11
| 0.00 -5.65 -2.81 11 |
3185.4 | 0.00 0.00 0.07 2 | -55.16 -2.81 11
| 0.00 -20.66 -2.81 11 |
3475.0 | 0.00 0.00 0.07 2 | -61.89 -2.81 11
| 0.00 -37.73 -2.81 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 241.22
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 547 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 548
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 39.77 MX = -2.81 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -45.68 MX = -2.81 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 201 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 79.88 -1.86 11 | -92.02 -1.86 11
| 0.00 -0.94 0.55 1 |
122.9 | 0.00 68.44 -1.86 11 | -94.13 -1.86 11
| 0.00 -0.93 0.55 1 |
245.8 | 0.00 46.47 -2.15 13 | -96.78 -1.86 11
| 0.00 -0.07 0.03 7 |
368.8 | 0.00 44.67 -1.86 11 | -99.36 -1.86 11
| 0.00 -0.68 0.19 4 |
491.7 | 0.00 26.89 -2.15 13 | -102.08 -1.86 11
| 0.00 -0.70 0.19 4 |
614.6 | 0.00 19.51 -1.86 11 | -105.96 -1.86 11
| 0.00 -0.05 0.01 10 |
737.5 | 0.00 6.07 -2.15 13 | -109.14 -1.86 11
| 0.00 -0.86 0.55 1 |
860.4 | 0.00 0.84 -0.55 2 | -112.33 -1.86 11
| 0.00 -7.33 -1.86 11 |
983.3 | 0.00 0.83 -0.55 2 | -116.20 -1.86 11
| 0.00 -18.03 -1.26 15 |
1106.3 | 0.00 0.81 -0.55 2 | -118.93 -1.86 11
| 0.00 -35.82 -1.86 11 |
1229.2 | 0.00 0.80 -0.55 2 | -121.50 -1.86 11
| 0.00 -50.61 -1.86 11 |
1352.1 | 0.00 0.79 -0.55 2 | -124.16 -1.86 11
| 0.00 -65.72 -1.86 11 |
1475.0 | 0.00 0.77 -0.55 2 | -126.27 -1.86 11
| 0.00 -81.11 -1.86 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 548 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 549
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 220.71 506.10
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 498.03 273.32 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 7-10í 4-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 666.4 mm AWAY FROM END SUPPORT
VY = -110.74 MX = -1.86 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 203 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 549 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 550
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.51 0.42 2 | 53.23 3.46 11
| 0.00 -43.12 2.27 12 |
258.3 | 0.00 8.17 0.42 2 | 48.44 3.46 11
| 0.00 -30.99 2.27 12 |
516.7 | 0.00 2.88 2.29 21 | 41.86 3.46 11
| 0.00 -19.99 2.27 12 |
775.0 | 0.00 5.52 2.29 21 | 35.14 3.46 11
| 0.00 -10.38 2.27 12 |
1033.3 | 0.00 7.59 3.27 13 | 27.72 3.46 11
| 0.00 -5.19 1.04 20 |
1291.7 | 0.00 9.07 3.46 11 | 17.93 3.46 11
| 0.00 -2.80 -0.42 1 |
1550.0 | 0.00 10.29 2.99 14 | 8.88 3.46 11
| 0.00 -1.45 -0.42 1 |
1808.3 | 0.00 11.06 3.27 13 | -6.37 3.27 13
| 0.00 -0.11 -0.42 1 |
2066.7 | 0.00 12.45 3.46 11 | -14.21 3.27 13
| 0.00 -1.23 0.42 2 |
2325.0 | 0.00 9.00 3.46 11 | -20.15 3.27 13
| 0.00 -2.58 0.42 2 |
2583.3 | 0.00 7.58 2.27 12 | -25.52 3.27 13
| 0.00 -4.39 2.29 21 |
2841.7 | 0.00 6.07 1.04 20 | -30.68 3.46 11
| 0.00 -9.15 3.27 13 |
3100.0 | 0.00 6.60 -0.42 1 | -35.47 3.46 11
| 0.00 -17.61 3.27 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 268.08 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 38.31 MX = 3.46 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 550 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 551
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -25.04 MX = 3.27 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 204 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.13 0.00 21 | 24.09 -0.05 12
| 0.00 -15.83 -0.03 20 |
250.0 | 0.00 9.56 0.00 21 | 20.65 -0.05 12
| 0.00 -11.12 -0.03 20 |
500.0 | 0.00 9.33 0.00 21 | 16.32 -0.05 12
| 0.00 -5.06 -0.05 12 |
750.0 | 0.00 8.23 -0.02 13 | 12.11 -0.05 12
| 0.00 -4.05 -0.01 1 |
1000.0 | 0.00 7.26 -0.02 13 | 8.87 -0.03 20
| 0.00 -2.62 -0.01 1 |
1250.0 | 0.00 4.99 -0.02 13 | -12.37 -0.02 13
| 0.00 -1.20 -0.01 1 |
1500.0 | 0.00 1.75 0.07 15 | -17.58 -0.02 13
| 0.00 -0.14 -0.08 3 |
1750.0 | 0.00 1.65 -0.01 1 | -22.80 -0.02 13
| 0.00 -3.80 -0.02 13 |
2000.0 | 0.00 3.07 -0.01 1 | -29.15 -0.02 13
| 0.00 -10.32 -0.02 13 |
2250.0 | 0.00 4.50 -0.01 1 | -33.47 -0.04 11
| 0.00 -18.14 -0.02 13 |
2500.0 | 0.00 5.92 -0.01 1 | -38.72 -0.04 11
| 0.00 -27.10 -0.02 13 |
2750.0 | 0.00 7.34 -0.01 1 | -44.13 -0.04 11
| 0.00 -37.12 -0.02 13 |
3000.0 | 0.00 8.77 -0.01 1 | -48.44 -0.04 11
| 0.00 -48.09 -0.02 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 275.61
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 551 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 552
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 15.86 MX = -0.05 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -37.85 MX = -0.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 207 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.44 0.15 2 | 51.86 -9.00 11
| 0.00 -17.52 -9.00 11 |
91.7 | 0.00 0.19 -0.01 8 | 50.32 -9.00 11
| 0.00 -12.84 -9.00 11 |
183.3 | 0.00 0.18 -0.01 8 | 48.54 -9.00 11
| 0.00 -8.95 -7.06 15 |
275.0 | 0.00 1.41 -4.72 22 | 46.62 -9.00 11
| 0.00 -3.95 -9.00 11 |
366.7 | 0.00 0.23 -9.00 11 | 44.48 -9.00 11
| 0.00 -1.83 -7.38 12 |
458.3 | 0.00 5.18 -7.34 14 | 42.45 -9.00 11
| 0.00 -1.49 -0.15 1 |
550.0 | 0.00 7.95 -7.02 13 | 40.02 -9.00 11
| 0.00 -1.30 -0.15 1 |
641.7 | 0.00 11.56 -9.00 11 | 37.41 -9.00 11
| 0.00 -1.23 0.12 4 |
733.3 | 0.00 14.89 -9.00 11 | 35.38 -9.00 11
| 0.00 -1.09 0.12 4 |
825.0 | 0.00 17.99 -9.00 11 | 32.73 -9.00 11
| 0.00 -0.95 0.12 4 |
916.7 | 0.00 20.89 -9.00 11 | 29.96 -9.00 11
| 0.00 -0.81 0.12 4 |
1008.3 | 0.00 23.56 -9.00 11 | 28.27 -9.00 11
| 0.00 -0.68 0.12 4 |
1100.0 | 0.00 25.99 -9.00 11 | 25.45 -9.00 11
| 0.00 -0.54 0.12 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 552 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 553
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 182.93 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 185.21 232.14
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 37.35 MX = -9.00 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 209 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 553 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 554
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.02 0.34 2 | 32.23 0.11 11
| 0.00 -10.64 0.11 11 |
258.3 | 0.00 0.89 0.34 2 | 27.63 0.11 11
| 0.00 -3.39 -0.32 12 |
516.7 | 0.00 3.40 0.11 11 | 20.86 0.11 11
| 0.00 -0.76 -0.34 1 |
775.0 | 0.00 7.97 0.11 11 | 14.40 0.11 11
| 0.00 -0.63 -0.34 1 |
1033.3 | 0.00 10.57 0.11 11 | 5.10 -0.32 12
| 0.00 -0.50 -0.34 1 |
1291.7 | 0.00 9.00 0.50 13 | -4.15 0.50 13
| 0.00 -0.37 -0.34 1 |
1550.0 | 0.00 8.23 0.11 11 | -12.65 0.50 13
| 0.00 -0.24 -0.34 1 |
1808.3 | 0.00 2.46 0.50 13 | -25.83 0.11 11
| 0.00 -0.11 -0.34 1 |
2066.7 | 0.00 0.02 -0.34 1 | -37.60 0.11 11
| 0.00 -4.28 0.22 14 |
2325.0 | 0.00 0.15 -0.34 1 | -46.38 0.11 11
| 0.00 -15.80 0.11 11 |
2583.3 | 0.00 0.28 -0.34 1 | -53.03 0.11 11
| 0.00 -28.66 0.11 11 |
2841.7 | 0.00 0.41 -0.34 1 | -60.54 0.11 11
| 0.00 -43.46 0.11 11 |
3100.0 | 0.00 0.54 -0.34 1 | -66.20 0.11 11
| 0.00 -59.87 0.11 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 348.21
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 22.37 MX = 0.11 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 554 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 555
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -48.72 MX = 0.11 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 211 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 35.40 2.65 11 | -7.32 2.65 11
| 0.00 -0.36 -0.01 4 |
208.3 | 0.00 33.49 2.65 11 | -11.04 2.65 11
| 0.00 -0.17 0.07 1 |
416.7 | 0.00 30.70 2.65 11 | -15.83 2.65 11
| 0.00 -0.19 -0.01 4 |
625.0 | 0.00 26.87 2.65 11 | -20.82 2.65 11
| 0.00 -0.11 -0.01 4 |
833.3 | 0.00 21.84 2.65 11 | -26.34 2.65 11
| 0.00 -0.03 -0.07 2 |
1041.7 | 0.00 12.45 2.20 12 | -35.49 2.65 11
| 0.00 -0.09 -0.07 2 |
1250.0 | 0.00 7.44 2.65 11 | -42.58 2.65 11
| 0.00 -0.16 -0.07 2 |
1458.3 | 0.00 0.17 0.17 6 | -49.98 2.65 11
| 0.00 -1.47 2.20 12 |
1666.7 | 0.00 0.29 0.07 1 | -59.18 2.65 11
| 0.00 -11.12 2.13 14 |
1875.0 | 0.00 0.36 0.07 1 | -64.95 2.65 11
| 0.00 -26.33 2.65 11 |
2083.3 | 0.00 0.42 0.07 1 | -71.40 2.65 11
| 0.00 -40.55 2.65 11 |
2291.7 | 0.00 0.49 0.07 1 | -76.62 2.65 11
| 0.00 -56.00 2.65 11 |
2500.0 | 0.00 0.56 0.07 1 | -81.52 2.65 11
| 0.00 -72.52 2.65 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 453.88
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 225.88 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 555 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 556
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 6-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = -18.94 MX = 2.65 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -63.71 MX = 2.65 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 212 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 24.08 0.74 13 | 18.77 0.05 12
| 0.00 -8.36 -0.29 1 |
245.8 | 0.00 24.86 0.74 13 | 15.26 0.05 12
| 0.00 -6.95 -0.29 1 |
491.7 | 0.00 24.63 0.74 13 | -7.52 0.70 21
| 0.00 -5.53 -0.29 1 |
737.5 | 0.00 22.77 0.49 11 | -10.65 0.70 21
| 0.00 -4.11 -0.29 1 |
983.3 | 0.00 21.29 0.49 11 | -14.23 0.74 13
| 0.00 -0.25 -0.03 7 |
1229.2 | 0.00 15.70 0.74 13 | -23.36 0.74 13
| 0.00 -0.10 -0.05 4 |
1475.0 | 0.00 9.23 0.74 13 | -30.29 0.74 13
| 0.00 -0.14 0.29 2 |
1720.8 | 0.00 4.54 0.05 12 | -37.23 0.74 13
| 0.00 -1.55 0.29 2 |
1966.7 | 0.00 0.68 -0.16 20 | -49.31 0.49 11
| 0.00 -9.53 0.74 13 |
2212.5 | 0.00 4.39 -0.29 1 | -56.14 0.49 11
| 0.00 -21.53 0.74 13 |
2458.3 | 0.00 5.80 -0.29 1 | -62.36 0.49 11
| 0.00 -34.95 0.74 13 |
2704.2 | 0.00 7.22 -0.29 1 | -68.89 0.49 11
| 0.00 -51.19 0.49 11 |
2950.0 | 0.00 8.63 -0.29 1 | -73.27 0.49 11
| 0.00 -68.66 0.49 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 556 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 557
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 407.94
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = -7.98 MX = 0.70 LD= 21
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 213 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 557 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 558
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.77 -0.16 1 | 48.80 0.54 11
| 0.00 -32.33 0.63 13 |
264.6 | 0.00 4.87 0.03 20 | 44.08 0.54 11
| 0.00 -20.51 0.63 13 |
529.2 | 0.00 7.56 0.03 20 | 37.15 0.63 13
| 0.00 -11.81 0.51 21 |
793.8 | 0.00 10.77 0.24 12 | 31.79 0.63 13
| 0.00 -5.07 0.51 21 |
1058.3 | 0.00 13.07 0.54 11 | 24.55 0.63 13
| 0.00 -3.15 0.16 2 |
1322.9 | 0.00 14.30 0.35 15 | 16.05 0.63 13
| 0.00 -1.49 0.16 2 |
1587.5 | 0.00 15.24 0.63 13 | 10.31 0.51 21
| 0.00 -0.16 -0.16 1 |
1852.1 | 0.00 17.29 0.54 11 | -16.30 0.24 12
| 0.00 -1.82 -0.16 1 |
2116.7 | 0.00 14.50 0.63 13 | -24.80 0.24 12
| 0.00 -3.47 -0.16 1 |
2381.2 | 0.00 11.29 0.51 21 | -30.66 0.54 11
| 0.00 -5.13 -0.16 1 |
2645.8 | 0.00 10.01 0.51 21 | -37.36 0.54 11
| 0.00 -10.56 0.24 12 |
2910.4 | 0.00 8.44 0.16 2 | -44.39 0.54 11
| 0.00 -21.24 0.24 12 |
3175.0 | 0.00 10.10 0.16 2 | -49.11 0.54 11
| 0.00 -33.12 0.24 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 188.81 178.08 178.08 178.08 189.71
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 35.31 MX = 0.63 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 558 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 559
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -33.75 MX = 0.54 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 215 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.61 -0.29 2 | 28.09 -0.58 11
| 0.00 -30.09 -0.11 12 |
291.7 | 0.00 5.54 -0.29 2 | 26.73 -0.58 11
| 0.00 -19.70 -0.58 11 |
583.3 | 0.00 4.47 -0.29 2 | 23.97 -0.58 11
| 0.00 -15.18 -0.11 12 |
875.0 | 0.00 0.71 -0.13 3 | 21.40 -0.58 11
| 0.00 -8.59 -0.11 12 |
1166.7 | 0.00 2.32 -0.29 2 | 16.24 -0.58 11
| 0.00 -3.60 0.32 20 |
1458.3 | 0.00 5.01 -0.81 13 | 12.47 -0.58 11
| 0.00 -1.25 0.29 1 |
1750.0 | 0.00 7.33 -0.58 11 | 7.35 -0.58 11
| 0.00 -0.18 0.29 1 |
2041.7 | 0.00 8.68 -0.58 11 | 6.34 0.32 20
| 0.00 -0.89 -0.29 2 |
2333.3 | 0.00 9.25 -0.11 12 | -5.63 -0.81 13
| 0.00 -1.96 -0.29 2 |
2625.0 | 0.00 9.43 -0.11 12 | -9.76 -0.81 13
| 0.00 -3.04 -0.29 2 |
2916.7 | 0.00 8.84 -0.11 12 | -11.82 -0.81 13
| 0.00 -4.52 -0.55 21 |
3208.3 | 0.00 8.11 0.32 20 | -14.03 -0.81 13
| 0.00 -7.43 -0.55 21 |
3500.0 | 0.00 8.13 0.32 20 | -15.12 -0.81 13
| 0.00 -10.62 -0.55 21 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 559 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 560
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 25.12 MX = -0.58 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -11.20 MX = -0.81 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 216 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.08 -0.20 3 | 124.75 1.51 11
| 0.00 -108.11 1.51 11 |
116.7 | 0.00 1.04 -0.20 3 | 122.78 1.51 11
| 0.00 -76.18 1.45 15 |
233.3 | 0.00 1.00 -0.20 3 | 120.43 1.51 11
| 0.00 -79.49 1.51 11 |
350.0 | 0.00 0.96 -0.20 3 | 117.84 1.51 11
| 0.00 -65.60 1.51 11 |
466.7 | 0.00 0.70 -0.04 2 | 114.91 1.51 11
| 0.00 -52.00 1.51 11 |
583.3 | 0.00 0.88 -0.20 3 | 112.15 1.51 11
| 0.00 -38.75 1.51 11 |
700.0 | 0.00 0.84 -0.20 3 | 108.73 1.51 11
| 0.00 -25.88 1.51 11 |
816.7 | 0.00 0.02 -0.02 9 | 105.04 1.51 11
| 0.00 -13.38 1.51 11 |
933.3 | 0.00 0.98 0.37 22 | 102.28 1.51 11
| 0.00 -1.94 1.45 15 |
1050.0 | 0.00 10.39 1.51 11 | 98.52 1.51 11
| 0.00 -0.72 0.20 4 |
1166.7 | 0.00 21.70 1.51 11 | 94.55 1.51 11
| 0.00 -0.68 0.20 4 |
1283.3 | 0.00 32.60 1.51 11 | 92.34 1.51 11
| 0.00 -0.64 0.20 4 |
1400.0 | 0.00 43.08 1.51 11 | 88.30 1.51 11
| 0.00 -0.59 0.20 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 560 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 561
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 697.04 398.13 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 260.35
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 9-10í 6-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 661.7 mm AWAY FROM START SUPPORT
VY = 109.84 MX = 1.51 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 217 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 125.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 561 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 562
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 4.48 0.15 1 | 134.22 16.64 11
| 0.00 -56.09 16.64 11 |
10.4 | 0.00 4.43 0.15 1 | 134.18 16.64 11
| 0.00 -54.69 16.64 11 |
20.8 | 0.00 0.35 0.02 4 | 134.14 16.64 11
| 0.00 -53.30 16.64 11 |
31.3 | 0.00 4.34 0.15 1 | 134.09 16.64 11
| 0.00 -46.73 13.14 13 |
41.7 | 0.00 4.29 0.15 1 | 134.05 16.64 11
| 0.00 -45.55 13.14 13 |
52.1 | 0.00 4.24 0.15 1 | 134.00 16.64 11
| 0.00 -49.11 16.64 11 |
62.5 | 0.00 4.20 0.15 1 | 133.96 16.64 11
| 0.00 -38.63 13.30 17 |
72.9 | 0.00 4.15 0.15 1 | 133.90 16.64 11
| 0.00 -46.32 16.64 11 |
83.3 | 0.00 4.10 0.15 1 | 133.86 16.64 11
| 0.00 -40.86 13.14 13 |
93.8 | 0.00 4.06 0.15 1 | 133.81 16.64 11
| 0.00 -43.53 16.64 11 |
104.2 | 0.00 4.01 0.15 1 | 133.75 16.64 11
| 0.00 -42.13 16.64 11 |
114.6 | 0.00 3.96 0.15 1 | 133.71 16.64 11
| 0.00 -40.74 16.64 11 |
125.0 | 0.00 3.91 0.15 1 | 133.65 16.64 11
| 0.00 -39.35 16.64 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 501.72 399.91 351.17 416.11 389.85
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 7-10í 6-10í 5-10í 6-10í 5-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 150 mm c/c @ 150 mm c/c @ 145 mm c/c @ 150 mm c/c @ 145 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = 246.96 MX = 16.64 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 562 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 563
============================================================================
B E A M N O. 218 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.46 0.34 1 | 36.56 -1.65 11
| 0.00 -4.88 -1.65 11 |
262.5 | 0.00 2.67 -1.72 13 | 31.69 -1.65 11
| 0.00 -0.51 -0.34 2 |
525.0 | 0.00 11.61 -1.65 11 | 24.91 -1.65 11
| 0.00 -0.56 -0.34 2 |
787.5 | 0.00 14.10 -1.24 15 | 17.93 -1.65 11
| 0.00 -0.61 -0.34 2 |
1050.0 | 0.00 20.96 -1.65 11 | 10.26 -1.65 11
| 0.00 -0.66 -0.34 2 |
1312.5 | 0.00 18.73 -0.92 12 | -0.24 -1.72 13
| 0.00 -0.71 -0.34 2 |
1575.0 | 0.00 21.29 -1.65 11 | -8.73 -1.65 11
| 0.00 -0.76 -0.34 2 |
1837.5 | 0.00 17.77 -1.65 11 | -17.44 -1.65 11
| 0.00 -0.81 -0.34 2 |
2100.0 | 0.00 11.79 -1.65 11 | -27.72 -1.65 11
| 0.00 -0.86 -0.34 2 |
2362.5 | 0.00 3.56 -1.65 11 | -35.39 -1.65 11
| 0.00 -0.45 -1.46 21 |
2625.0 | 0.00 0.96 0.34 1 | -42.37 -1.65 11
| 0.00 -6.72 -1.65 11 |
2887.5 | 0.00 1.01 0.34 1 | -49.15 -1.65 11
| 0.00 -18.82 -1.65 11 |
3150.0 | 0.00 1.06 0.34 1 | -54.02 -1.65 11
| 0.00 -32.38 -1.65 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 198.97
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 563 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 564
============================================================================
B E A M N O. 219 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.82 -0.34 1 | 52.08 4.74 11
| 0.00 -32.92 4.74 11 |
258.3 | 0.00 1.59 -0.34 1 | 47.28 4.74 11
| 0.00 -17.96 4.20 13 |
516.7 | 0.00 1.36 -0.34 1 | 40.62 4.74 11
| 0.00 -8.53 4.20 13 |
775.0 | 0.00 1.07 4.74 11 | 33.83 4.74 11
| 0.00 -0.50 4.20 13 |
1033.3 | 0.00 8.11 3.38 12 | 26.31 4.74 11
| 0.00 -0.90 0.34 2 |
1291.7 | 0.00 14.33 4.74 11 | 16.26 4.74 11
| 0.00 -0.67 0.34 2 |
1550.0 | 0.00 17.52 4.74 11 | 7.72 4.74 11
| 0.00 -0.24 0.30 3 |
1808.3 | 0.00 18.32 4.74 11 | -0.81 4.74 11
| 0.00 -0.20 0.34 2 |
2066.7 | 0.00 16.77 4.74 11 | -10.86 4.74 11
| 0.00 -0.03 -0.34 1 |
2325.0 | 0.00 13.04 4.74 11 | -18.38 4.74 11
| 0.00 -0.26 -0.34 1 |
2583.3 | 0.00 7.34 4.74 11 | -25.17 4.74 11
| 0.00 -0.49 -0.34 1 |
2841.7 | 0.00 0.77 4.20 13 | -31.84 4.74 11
| 0.00 -0.12 4.74 11 |
3100.0 | 0.00 0.95 0.34 2 | -36.64 4.74 11
| 0.00 -8.98 4.74 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 231.58 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 564 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 565
============================================================================
B E A M N O. 220 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 21.78 5.42 11 | 16.76 5.42 11
| 0.00 -0.24 -0.13 2 |
262.5 | 0.00 20.51 4.49 12 | 10.46 5.42 11
| 0.00 -0.19 -0.13 2 |
525.0 | 0.00 27.16 5.42 11 | 2.95 5.42 11
| 0.00 -0.14 -0.13 2 |
787.5 | 0.00 27.02 5.42 11 | -4.39 5.42 11
| 0.00 -0.10 -0.13 2 |
1050.0 | 0.00 24.81 5.42 11 | -12.08 5.42 11
| 0.00 -0.00 -0.00 10 |
1312.5 | 0.00 20.33 5.42 11 | -22.38 5.42 11
| 0.00 -0.00 0.01 7 |
1575.0 | 0.00 13.41 5.42 11 | -31.11 5.42 11
| 0.00 -0.04 0.13 1 |
1837.5 | 0.00 4.00 5.42 11 | -39.85 5.42 11
| 0.00 -0.01 0.01 7 |
2100.0 | 0.00 0.13 -0.13 2 | -50.15 5.42 11
| 0.00 -7.86 5.42 11 |
2362.5 | 0.00 0.18 -0.13 2 | -57.84 5.42 11
| 0.00 -21.99 5.42 11 |
2625.0 | 0.00 0.22 -0.13 2 | -65.18 5.42 11
| 0.00 -38.18 5.42 11 |
2887.5 | 0.00 0.27 -0.13 2 | -72.69 5.42 11
| 0.00 -56.32 5.42 11 |
3150.0 | 0.00 0.31 -0.13 2 | -78.98 5.42 11
| 0.00 -76.22 5.42 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 512.62
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 203.99 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 565 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 566
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = -0.80 MX = 5.42 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 221 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.66 -0.07 1 | 76.86 0.20 11
| 0.00 -75.31 0.24 13 |
258.3 | 0.00 10.89 -0.07 1 | 70.67 0.20 11
| 0.00 -56.09 0.20 11 |
516.7 | 0.00 4.83 -0.06 4 | 63.30 0.20 11
| 0.00 -38.74 0.20 11 |
775.0 | 0.00 3.82 -0.06 4 | 56.10 0.20 11
| 0.00 -27.42 0.24 13 |
1033.3 | 0.00 5.56 -0.07 1 | 48.56 0.20 11
| 0.00 -14.51 0.24 13 |
1291.7 | 0.00 6.33 0.03 20 | 39.03 0.24 13
| 0.00 -5.04 0.23 21 |
1550.0 | 0.00 10.41 0.20 11 | 32.18 0.24 13
| 0.00 -2.01 0.07 2 |
1808.3 | 0.00 16.95 0.20 11 | 25.34 0.24 13
| 0.00 -0.24 0.07 2 |
2066.7 | 0.00 21.13 0.20 11 | 17.28 0.24 13
| 0.00 -1.53 -0.07 1 |
2325.0 | 0.00 23.12 0.20 11 | 12.04 0.23 21
| 0.00 -3.31 -0.07 1 |
2583.3 | 0.00 24.59 0.24 13 | -12.55 0.03 20
| 0.00 -5.08 -0.07 1 |
2841.7 | 0.00 25.21 0.24 13 | -16.89 0.08 12
| 0.00 -6.86 -0.07 1 |
3100.0 | 0.00 24.46 0.24 13 | -21.85 0.08 12
| 0.00 -8.63 -0.07 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 446.36 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 566 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 567
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 59.31 MX = 0.20 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -12.19 MX = 0.03 LD= 20
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 222 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.72 0.58 2 | 111.68 -6.72 11
| 0.00 -87.96 -6.72 11 |
116.7 | 0.00 1.61 0.58 2 | 108.93 -6.72 11
| 0.00 -75.09 -6.72 11 |
233.3 | 0.00 1.50 0.58 2 | 105.93 -6.72 11
| 0.00 -52.49 -5.61 15 |
350.0 | 0.00 1.39 0.58 2 | 102.97 -6.72 11
| 0.00 -50.36 -6.72 11 |
466.7 | 0.00 1.28 0.58 2 | 99.94 -6.72 11
| 0.00 -33.01 -5.61 15 |
583.3 | 0.00 1.17 0.58 2 | 96.40 -6.72 11
| 0.00 -23.06 -6.07 12 |
700.0 | 0.00 1.06 0.58 2 | 93.16 -6.72 11
| 0.00 -14.73 -5.61 15 |
816.7 | 0.00 0.95 0.58 2 | 89.93 -6.72 11
| 0.00 -4.33 -5.45 16 |
933.3 | 0.00 4.94 -6.72 11 | 86.38 -6.72 11
| 0.00 -1.38 -0.20 4 |
1050.0 | 0.00 14.85 -6.72 11 | 83.35 -6.72 11
| 0.00 -0.73 -0.58 1 |
1166.7 | 0.00 24.40 -6.72 11 | 80.39 -6.72 11
| 0.00 -0.62 -0.58 1 |
1283.3 | 0.00 33.60 -6.72 11 | 77.40 -6.72 11
| 0.00 -0.51 -0.58 1 |
1400.0 | 0.00 42.47 -6.72 11 | 74.64 -6.72 11
| 0.00 -0.40 -0.58 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 567 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 568
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 608.68 361.60 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 308.36
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 665.0 mm AWAY FROM START SUPPORT
VY = 94.13 MX = -6.72 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 223 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 568 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 569
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.03 -0.05 1 | 49.78 0.60 11
| 0.00 -24.78 0.60 11 |
285.4 | 0.00 0.03 -0.05 1 | 42.94 0.60 11
| 0.00 -11.55 0.60 11 |
570.8 | 0.00 0.03 -0.05 1 | 34.83 0.60 11
| 0.00 -0.44 0.60 11 |
856.3 | 0.00 6.66 0.54 13 | 26.90 0.60 11
| 0.00 -0.00 0.00 8 |
1141.7 | 0.00 14.65 0.60 11 | 16.59 0.60 11
| 0.00 -0.00 0.00 3 |
1427.1 | 0.00 18.16 0.60 11 | 7.56 0.60 11
| 0.00 -0.02 0.05 2 |
1712.5 | 0.00 18.76 0.60 11 | -3.28 0.60 11
| 0.00 -0.02 0.05 2 |
1997.9 | 0.00 16.29 0.60 11 | -14.13 0.60 11
| 0.00 -0.01 0.05 2 |
2283.3 | 0.00 8.72 0.48 18 | -23.16 0.60 11
| 0.00 -0.01 0.05 2 |
2568.8 | 0.00 2.74 0.60 11 | -33.47 0.60 11
| 0.00 -0.01 0.05 2 |
2854.2 | 0.00 0.01 -0.05 1 | -41.40 0.60 11
| 0.00 -7.94 0.60 11 |
3139.6 | 0.00 0.00 -0.05 1 | -49.51 0.60 11
| 0.00 -20.93 0.60 11 |
3425.0 | 0.00 0.00 -0.05 1 | -56.35 0.60 11
| 0.00 -36.03 0.60 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 210.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 35.69 MX = 0.60 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 569 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 570
============================================================================
B E A M N O. 224 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3750.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.00 -0.47 2 | 67.20 0.05 11
| 0.00 -48.23 0.61 12 |
312.5 | 0.00 3.12 -0.22 3 | 59.71 0.05 11
| 0.00 -28.46 0.05 11 |
625.0 | 0.00 5.22 -0.47 2 | 50.75 0.05 11
| 0.00 -15.23 0.61 12 |
937.5 | 0.00 7.22 -0.67 21 | 38.94 0.61 12
| 0.00 -4.29 0.74 20 |
1250.0 | 0.00 14.61 -0.52 13 | 29.76 0.61 12
| 0.00 -2.45 0.47 1 |
1562.5 | 0.00 22.57 0.05 11 | 21.76 0.61 12
| 0.00 -1.06 0.47 1 |
1875.0 | 0.00 26.87 0.05 11 | 10.97 0.74 20
| 0.00 -0.33 -0.47 2 |
2187.5 | 0.00 27.43 0.05 11 | -8.48 -0.67 21
| 0.00 -1.72 -0.47 2 |
2500.0 | 0.00 24.32 0.05 11 | -17.31 -0.52 13
| 0.00 -1.47 -0.22 3 |
2812.5 | 0.00 19.68 0.61 12 | -26.48 -0.52 13
| 0.00 -4.50 -0.47 2 |
3125.0 | 0.00 13.64 0.74 20 | -33.48 -0.52 13
| 0.00 -5.88 -0.47 2 |
3437.5 | 0.00 9.46 0.74 20 | -44.14 0.05 11
| 0.00 -12.36 -0.67 21 |
3750.0 | 0.00 8.66 0.47 1 | -51.63 0.05 11
| 0.00 -25.66 -0.52 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 282.32 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 570 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 571
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 53.13 MX = 0.05 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -32.56 MX = -0.52 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 225 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 11.70 0.05 20 | 35.65 0.53 11
| 0.00 -11.70 0.48 21 |
287.5 | 0.00 14.19 0.05 20 | 29.45 0.60 13
| 0.00 -0.57 0.01 8 |
575.0 | 0.00 15.02 0.34 15 | 22.75 0.60 13
| 0.00 -4.70 0.14 2 |
862.5 | 0.00 19.96 0.25 12 | 16.22 0.60 13
| 0.00 -3.16 0.14 2 |
1150.0 | 0.00 22.43 0.53 11 | 9.35 0.60 13
| 0.00 -0.75 0.07 3 |
1437.5 | 0.00 21.84 0.53 11 | -12.93 0.25 12
| 0.00 -0.01 0.01 8 |
1725.0 | 0.00 18.22 0.53 11 | -20.81 0.25 12
| 0.00 -1.48 -0.14 1 |
2012.5 | 0.00 10.94 0.50 14 | -27.78 0.53 11
| 0.00 -3.03 -0.14 1 |
2300.0 | 0.00 7.47 0.48 21 | -39.50 0.53 11
| 0.00 -6.26 0.05 20 |
2587.5 | 0.00 6.12 0.14 2 | -48.08 0.53 11
| 0.00 -15.93 0.25 12 |
2875.0 | 0.00 7.67 0.14 2 | -56.25 0.53 11
| 0.00 -29.83 0.25 12 |
3162.5 | 0.00 9.22 0.14 2 | -64.62 0.53 11
| 0.00 -45.64 0.25 12 |
3450.0 | 0.00 10.76 0.14 2 | -71.53 0.53 11
| 0.00 -62.79 0.53 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 370.56
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 571 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 572
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 23.55 MX = 0.60 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 226 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.78 -0.35 2 | 110.01 1.80 11
| 0.00 -115.85 1.80 11 |
208.3 | 0.00 0.01 0.00 10 | 105.04 1.80 11
| 0.00 -76.75 1.86 12 |
416.7 | 0.00 1.54 -0.35 2 | 99.31 1.80 11
| 0.00 -72.14 1.80 11 |
625.0 | 0.00 1.42 -0.35 2 | 93.68 1.80 11
| 0.00 -52.01 1.80 11 |
833.3 | 0.00 1.29 -0.35 2 | 87.84 1.80 11
| 0.00 -33.13 1.80 11 |
1041.7 | 0.00 0.05 0.05 4 | 80.35 1.80 11
| 0.00 -15.58 1.80 11 |
1250.0 | 0.00 0.52 1.80 11 | 73.84 1.80 11
| 0.00 -1.38 1.88 20 |
1458.3 | 0.00 15.18 1.80 11 | 67.34 1.80 11
| 0.00 -0.93 0.35 1 |
1666.7 | 0.00 28.41 1.80 11 | 59.85 1.80 11
| 0.00 -0.81 0.35 1 |
1875.0 | 0.00 40.29 1.80 11 | 54.00 1.80 11
| 0.00 -0.68 0.35 1 |
2083.3 | 0.00 50.93 1.80 11 | 48.38 1.80 11
| 0.00 -0.56 0.35 1 |
2291.7 | 0.00 60.39 1.80 11 | 42.65 1.80 11
| 0.00 -0.44 0.35 1 |
2500.0 | 0.00 68.76 1.80 11 | 37.68 1.80 11
| 0.00 -0.32 0.35 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 572 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 573
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 761.29 317.15 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 247.26 422.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 10-10í 5-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 535.0 mm AWAY FROM START SUPPORT
VY = 96.07 MX = 1.80 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 227 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 573 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 574
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 23.54 -3.52 11 | -98.09 -3.52 11
| 0.00 -0.76 0.21 2 |
91.7 | 0.00 14.45 -3.52 11 | -100.24 -3.52 11
| 0.00 -0.89 0.21 2 |
183.3 | 0.00 5.15 -3.52 11 | -102.55 -3.52 11
| 0.00 -0.11 -0.01 4 |
275.0 | 0.00 1.14 -0.21 1 | -104.84 -3.52 11
| 0.00 -4.35 -3.52 11 |
366.7 | 0.00 1.27 -0.21 1 | -107.16 -3.52 11
| 0.00 -14.07 -3.52 11 |
458.3 | 0.00 0.08 0.01 3 | -109.81 -3.52 11
| 0.00 -24.01 -3.52 11 |
550.0 | 0.00 0.14 0.02 7 | -112.27 -3.52 11
| 0.00 -34.19 -3.52 11 |
641.7 | 0.00 1.66 -0.21 1 | -114.72 -3.52 11
| 0.00 -44.59 -3.52 11 |
733.3 | 0.00 1.79 -0.21 1 | -117.37 -3.52 11
| 0.00 -55.23 -3.52 11 |
825.0 | 0.00 1.91 -0.21 1 | -119.70 -3.52 11
| 0.00 -66.10 -3.52 11 |
916.7 | 0.00 2.04 -0.21 1 | -121.98 -3.52 11
| 0.00 -77.18 -3.52 11 |
1008.3 | 0.00 2.17 -0.21 1 | -124.29 -3.52 11
| 0.00 -88.47 -3.52 11 |
1100.0 | 0.00 2.30 -0.21 1 | -126.45 -3.52 11
| 0.00 -99.96 -3.52 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 227.78 423.31 647.60
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 4-12í 6-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -109.19 MX = -3.52 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 574 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 575
============================================================================
B E A M N O. 228 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 14.09 -0.09 1 | 64.42 1.01 11
| 0.00 -58.36 0.91 13 |
264.6 | 0.00 12.09 -0.09 1 | 58.08 1.01 11
| 0.00 -37.48 0.65 21 |
529.2 | 0.00 10.09 -0.09 1 | 50.50 1.01 11
| 0.00 -29.07 0.91 13 |
793.8 | 0.00 8.09 -0.09 1 | 43.09 1.01 11
| 0.00 -17.24 0.65 21 |
1058.3 | 0.00 9.47 0.38 20 | 37.34 0.91 13
| 0.00 -8.79 0.65 21 |
1322.9 | 0.00 12.56 0.70 12 | 29.00 0.91 13
| 0.00 -4.08 0.09 2 |
1587.5 | 0.00 15.09 1.01 11 | 21.94 0.91 13
| 0.00 -2.08 0.09 2 |
1852.1 | 0.00 18.08 1.01 11 | 14.88 0.91 13
| 0.00 -0.08 0.09 2 |
2116.7 | 0.00 18.58 1.01 11 | -11.60 0.70 12
| 0.00 -1.92 -0.09 1 |
2381.2 | 0.00 18.11 0.91 13 | -17.81 0.70 12
| 0.00 -3.92 -0.09 1 |
2645.8 | 0.00 17.38 0.91 13 | -23.73 0.70 12
| 0.00 -5.92 -0.09 1 |
2910.4 | 0.00 16.14 0.65 21 | -29.80 0.70 12
| 0.00 -7.61 0.38 20 |
3175.0 | 0.00 15.17 0.65 21 | -34.88 0.70 12
| 0.00 -14.59 0.38 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 347.03 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 575 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 576
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -23.49 MX = 0.70 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 229 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.20 0.09 3 | 51.08 1.74 11
| 0.00 -9.34 1.74 11 |
291.7 | 0.00 4.79 1.74 11 | 45.74 1.74 11
| 0.00 -0.07 -0.18 1 |
583.3 | 0.00 13.82 1.61 13 | 37.92 1.74 11
| 0.00 -0.15 -0.18 1 |
875.0 | 0.00 27.01 1.74 11 | 30.06 1.74 11
| 0.00 -0.23 -0.18 1 |
1166.7 | 0.00 34.41 1.74 11 | 19.38 1.74 11
| 0.00 -0.31 -0.18 1 |
1458.3 | 0.00 38.87 1.74 11 | 10.10 1.74 11
| 0.00 -0.24 -0.09 4 |
1750.0 | 0.00 40.32 1.74 11 | -0.52 1.74 11
| 0.00 -0.47 -0.18 1 |
2041.7 | 0.00 38.57 1.74 11 | -11.15 1.74 11
| 0.00 -0.26 -0.09 4 |
2333.3 | 0.00 33.80 1.74 11 | -20.43 1.74 11
| 0.00 -0.63 -0.18 1 |
2625.0 | 0.00 26.09 1.74 11 | -31.11 1.74 11
| 0.00 -0.71 -0.18 1 |
2916.7 | 0.00 15.83 1.74 11 | -38.97 1.74 11
| 0.00 -0.79 -0.18 1 |
3208.3 | 0.00 3.65 1.61 13 | -46.78 1.74 11
| 0.00 -0.87 -0.18 1 |
3500.0 | 0.00 0.95 0.18 2 | -52.13 1.74 11
| 0.00 -11.18 1.74 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 246.16 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 576 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 577
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 230 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.69 -4.52 11 | 36.72 -4.52 11
| 0.00 -0.36 -0.31 6 |
289.6 | 0.00 9.21 -4.05 12 | 31.22 -4.52 11
| 0.00 -0.03 -0.37 1 |
579.2 | 0.00 19.59 -4.52 11 | 23.77 -4.52 11
| 0.00 -0.06 -0.03 4 |
868.7 | 0.00 20.01 -4.05 12 | 15.25 -4.52 11
| 0.00 -0.08 -0.03 4 |
1158.3 | 0.00 28.46 -4.52 11 | 6.28 -4.52 11
| 0.00 -0.36 -0.37 1 |
1447.9 | 0.00 28.56 -4.52 11 | -4.87 -4.52 11
| 0.00 -0.47 -0.37 1 |
1737.5 | 0.00 20.66 -3.58 14 | -15.41 -4.52 11
| 0.00 -0.58 -0.37 1 |
2027.1 | 0.00 19.63 -4.52 11 | -25.94 -4.52 11
| 0.00 -0.01 -0.00 10 |
2316.7 | 0.00 9.45 -3.18 13 | -37.10 -4.52 11
| 0.00 -0.80 -0.37 1 |
2606.2 | 0.00 1.12 -0.31 6 | -46.06 -4.52 11
| 0.00 -2.19 -4.05 12 |
2895.8 | 0.00 1.01 0.37 2 | -54.58 -4.52 11
| 0.00 -16.10 -4.52 11 |
3185.4 | 0.00 1.12 0.37 2 | -62.04 -4.52 11
| 0.00 -33.06 -4.52 11 |
3475.0 | 0.00 1.23 0.37 2 | -67.53 -4.52 11
| 0.00 -51.85 -4.52 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 343.55
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 577 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 578
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -57.28 MX = -4.52 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 231 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.12 -16.29 11 | -51.44 -16.29 11
| 0.00 -0.00 -12.99 14 |
27.1 | 0.00 0.30 -1.15 1 | -51.55 -16.29 11
| 0.00 -0.66 -14.41 12 |
54.2 | 0.00 0.03 -0.11 7 | -51.66 -16.29 11
| 0.00 -2.67 -16.29 11 |
81.2 | 0.00 0.35 -1.15 1 | -51.79 -16.29 11
| 0.00 -2.84 -14.41 12 |
108.3 | 0.00 0.38 -1.15 1 | -51.94 -16.29 11
| 0.00 -5.48 -16.29 11 |
135.4 | 0.00 0.40 -1.15 1 | -52.05 -16.29 11
| 0.00 -5.03 -14.41 12 |
162.5 | 0.00 0.43 -1.15 1 | -52.21 -16.29 11
| 0.00 -8.30 -16.29 11 |
189.6 | 0.00 0.45 -1.15 1 | -52.38 -16.29 11
| 0.00 -9.72 -16.29 11 |
216.7 | 0.00 0.48 -1.15 1 | -52.49 -16.29 11
| 0.00 -11.14 -16.29 11 |
243.8 | 0.00 0.51 -1.15 1 | -52.68 -16.29 11
| 0.00 -12.56 -16.29 11 |
270.8 | 0.00 0.53 -1.15 1 | -52.88 -16.29 11
| 0.00 -13.99 -16.29 11 |
297.9 | 0.00 0.56 -1.15 1 | -52.99 -16.29 11
| 0.00 -15.42 -16.29 11 |
325.0 | 0.00 0.59 -1.15 1 | -53.21 -16.29 11
| 0.00 -16.86 -16.29 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 578 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 579
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 275.55 178.50 198.63 223.65 249.13
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 232 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.06 0.04 1 | 75.23 -0.46 11
| 0.00 -71.55 -0.46 11 |
285.4 | 0.00 4.34 0.04 1 | 70.16 -0.46 11
| 0.00 -50.81 -0.46 11 |
570.8 | 0.00 0.33 0.00 7 | 62.74 -0.46 11
| 0.00 -31.87 -0.46 11 |
856.3 | 0.00 2.89 0.04 1 | 54.28 -0.46 11
| 0.00 -15.08 -0.46 11 |
1141.7 | 0.00 2.37 -0.15 20 | 44.20 -0.46 11
| 0.00 -4.12 -0.27 21 |
1427.1 | 0.00 8.32 -0.36 16 | 32.81 -0.46 11
| 0.00 -1.44 -0.04 2 |
1712.5 | 0.00 17.91 -0.46 11 | 20.73 -0.46 11
| 0.00 -0.71 -0.04 2 |
1997.9 | 0.00 17.64 -0.37 19 | 9.97 -0.41 13
| 0.00 -0.08 -0.00 3 |
2283.3 | 0.00 19.09 -0.41 13 | -5.24 -0.32 12
| 0.00 -0.07 0.00 7 |
2568.8 | 0.00 20.42 -0.46 11 | -12.82 -0.46 11
| 0.00 -1.46 0.04 1 |
2854.2 | 0.00 15.46 -0.46 11 | -21.28 -0.46 11
| 0.00 -2.19 0.04 1 |
3139.6 | 0.00 10.17 -0.41 13 | -28.70 -0.46 11
| 0.00 -2.91 0.04 1 |
3425.0 | 0.00 5.87 -0.27 21 | -33.77 -0.46 11
| 0.00 -4.81 -0.32 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 579 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 580
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 425.97 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -18.83 MX = -0.46 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 233 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 200.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 580 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 581
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.78 -3.20 1 | 189.90 18.33 11
| 0.00 -142.98 18.33 11 |
16.7 | 0.00 2.65 -3.20 1 | 189.84 18.33 11
| 0.00 -139.81 18.33 11 |
33.3 | 0.00 2.52 -3.20 1 | 189.77 18.33 11
| 0.00 -136.65 18.33 11 |
50.0 | 0.00 2.38 -3.20 1 | 189.69 18.33 11
| 0.00 -108.83 16.67 14 |
66.7 | 0.00 2.25 -3.20 1 | 189.61 18.33 11
| 0.00 -130.33 18.33 11 |
83.3 | 0.00 2.12 -3.20 1 | 189.55 18.33 11
| 0.00 -104.28 18.50 13 |
100.0 | 0.00 1.99 -3.20 1 | 189.46 18.33 11
| 0.00 -101.59 18.50 13 |
116.7 | 0.00 1.86 -3.20 1 | 189.37 18.33 11
| 0.00 -120.85 18.33 11 |
133.3 | 0.00 0.15 -0.29 7 | 189.30 18.33 11
| 0.00 -96.23 18.50 13 |
150.0 | 0.00 1.59 -3.20 1 | 189.21 18.33 11
| 0.00 -114.54 18.33 11 |
166.7 | 0.00 1.46 -3.20 1 | 189.10 18.33 11
| 0.00 -111.39 18.33 11 |
183.3 | 0.00 1.33 -3.20 1 | 189.04 18.33 11
| 0.00 -108.24 18.33 11 |
200.0 | 0.00 1.20 -3.20 1 | 188.93 18.33 11
| 0.00 -105.09 18.33 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 1189.91 874.66 842.46 940.41 866.93
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 6-16í 5-16í 5-16í 5-16í 5-16í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 75 mm c/c @ 75 mm c/c @ 75 mm c/c @ 75 mm c/c @ 75 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 542.0 mm AWAY FROM END SUPPORT
VY = 265.87 MX = 18.33 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 581 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 582
============================================================================
B E A M N O. 236 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.89 -0.05 1 | 39.63 2.03 11
| 0.00 -14.67 2.03 11 |
262.5 | 0.00 2.49 -0.05 1 | 34.59 2.03 11
| 0.00 -4.50 1.64 14 |
525.0 | 0.00 5.24 1.57 12 | 28.19 2.03 11
| 0.00 -0.76 1.07 21 |
787.5 | 0.00 9.95 2.03 11 | 21.26 2.03 11
| 0.00 -0.05 0.01 8 |
1050.0 | 0.00 14.56 2.03 11 | 13.86 2.03 11
| 0.00 -1.28 0.05 2 |
1312.5 | 0.00 17.23 2.03 11 | 6.46 2.03 11
| 0.00 -0.87 0.05 2 |
1575.0 | 0.00 14.53 1.61 15 | -0.93 2.03 11
| 0.00 -0.47 0.05 2 |
1837.5 | 0.00 16.74 2.03 11 | -8.33 2.03 11
| 0.00 -0.06 0.05 2 |
2100.0 | 0.00 11.27 1.68 13 | -15.72 2.03 11
| 0.00 -0.34 -0.05 1 |
2362.5 | 0.00 8.48 2.03 11 | -23.12 2.03 11
| 0.00 -0.75 -0.05 1 |
2625.0 | 0.00 2.55 1.68 13 | -30.05 2.03 11
| 0.00 -1.84 0.94 20 |
2887.5 | 0.00 1.55 0.05 2 | -36.46 2.03 11
| 0.00 -7.34 2.03 11 |
3150.0 | 0.00 1.96 0.05 2 | -41.49 2.03 11
| 0.00 -17.60 2.03 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 582 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 583
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 28.23 MX = 2.03 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -29.68 MX = 2.03 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 238 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.03 -0.07 1 | 51.55 -2.96 11
| 0.00 -23.34 -2.96 11 |
289.6 | 0.00 0.02 -0.07 1 | 46.10 -2.96 11
| 0.00 -9.17 -2.96 11 |
579.2 | 0.00 2.56 -2.46 12 | 38.30 -2.96 11
| 0.00 -0.02 0.07 2 |
868.7 | 0.00 10.61 -2.46 12 | 29.84 -2.96 11
| 0.00 -0.00 0.01 8 |
1158.3 | 0.00 16.51 -2.38 16 | 21.72 -2.96 11
| 0.00 -0.01 0.07 2 |
1447.9 | 0.00 24.84 -2.96 11 | 8.02 -2.96 11
| 0.00 -0.00 0.01 8 |
1737.5 | 0.00 20.50 -2.46 12 | -3.37 -2.96 11
| 0.00 -0.00 -0.07 1 |
2027.1 | 0.00 22.83 -2.96 11 | -15.89 -2.96 11
| 0.00 -0.00 -0.07 1 |
2316.7 | 0.00 13.19 -2.46 12 | -29.61 -2.96 11
| 0.00 -0.01 -0.07 1 |
2606.2 | 0.00 6.74 -2.96 11 | -37.91 -2.96 11
| 0.00 -0.01 -0.07 1 |
2895.8 | 0.00 0.02 0.07 2 | -48.18 -2.96 11
| 0.00 -5.91 -2.96 11 |
3185.4 | 0.00 0.02 0.07 2 | -55.48 -2.96 11
| 0.00 -21.01 -2.96 11 |
3475.0 | 0.00 0.03 0.07 2 | -62.22 -2.96 11
| 0.00 -38.17 -2.96 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 245.40
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 583 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 584
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 39.45 MX = -2.96 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -46.01 MX = -2.96 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 240 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 82.08 -2.08 11 | -90.31 -2.08 11
| 0.00 -0.86 0.30 1 |
122.9 | 0.00 57.70 -2.02 13 | -92.43 -2.08 11
| 0.00 -0.71 0.15 4 |
245.8 | 0.00 59.34 -2.08 11 | -95.08 -2.08 11
| 0.00 -0.84 0.30 1 |
368.8 | 0.00 47.50 -2.08 11 | -97.65 -2.08 11
| 0.00 -0.75 0.15 4 |
491.7 | 0.00 35.32 -2.08 11 | -100.38 -2.08 11
| 0.00 -0.77 0.15 4 |
614.6 | 0.00 22.75 -2.08 11 | -104.25 -2.08 11
| 0.00 -0.82 0.30 1 |
737.5 | 0.00 9.76 -2.08 11 | -107.44 -2.08 11
| 0.00 -0.81 0.15 4 |
860.4 | 0.00 0.11 -1.40 21 | -110.62 -2.08 11
| 0.00 -3.66 -2.08 11 |
983.3 | 0.00 0.79 -0.30 2 | -114.50 -2.08 11
| 0.00 -17.50 -2.08 11 |
1106.3 | 0.00 0.78 -0.30 2 | -117.23 -2.08 11
| 0.00 -31.73 -2.08 11 |
1229.2 | 0.00 0.77 -0.30 2 | -119.80 -2.08 11
| 0.00 -46.31 -2.08 11 |
1352.1 | 0.00 0.76 -0.30 2 | -122.45 -2.08 11
| 0.00 -61.21 -2.08 11 |
1475.0 | 0.00 0.75 -0.30 2 | -124.57 -2.08 11
| 0.00 -76.39 -2.08 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 584 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 585
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 198.84 477.52
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 514.94 292.53 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 7-10í 4-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 666.4 mm AWAY FROM END SUPPORT
VY = -109.04 MX = -2.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 242 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 585 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 586
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 4.25 0.42 2 | 52.40 3.62 11
| 0.00 -37.88 3.62 11 |
258.3 | 0.00 0.86 0.18 3 | 47.61 3.62 11
| 0.00 -24.95 3.62 11 |
516.7 | 0.00 0.06 0.04 8 | 41.03 3.62 11
| 0.00 -13.43 3.62 11 |
775.0 | 0.00 1.42 2.37 21 | 34.32 3.62 11
| 0.00 -3.59 2.68 15 |
1033.3 | 0.00 5.48 3.40 13 | 26.89 3.62 11
| 0.00 -1.23 1.11 20 |
1291.7 | 0.00 9.76 3.62 11 | 17.10 3.62 11
| 0.00 -1.16 -0.42 1 |
1550.0 | 0.00 13.05 3.62 11 | 8.05 3.62 11
| 0.00 -0.55 -0.42 1 |
1808.3 | 0.00 13.92 3.62 11 | -3.66 3.40 13
| 0.00 -0.04 0.18 3 |
2066.7 | 0.00 9.96 2.94 17 | -10.79 3.62 11
| 0.00 -0.69 0.42 2 |
2325.0 | 0.00 8.83 3.62 11 | -18.22 3.62 11
| 0.00 -1.30 0.42 2 |
2583.3 | 0.00 3.21 3.62 11 | -24.93 3.62 11
| 0.00 -1.58 2.37 21 |
2841.7 | 0.00 1.69 1.11 20 | -31.51 3.62 11
| 0.00 -6.36 3.40 13 |
3100.0 | 0.00 3.15 -0.42 1 | -36.30 3.62 11
| 0.00 -14.12 3.40 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 250.08 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 37.48 MX = 3.62 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 586 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 587
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -24.33 MX = 3.62 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 243 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 11.00 -0.51 21 | 21.53 0.62 12
| 0.00 -13.54 0.69 20 |
250.0 | 0.00 11.08 -0.51 21 | 18.08 0.62 12
| 0.00 -9.25 0.69 20 |
500.0 | 0.00 10.50 -0.51 21 | 13.75 0.62 12
| 0.00 -2.88 0.62 12 |
750.0 | 0.00 9.61 -0.34 13 | 10.15 0.69 20
| 0.00 -3.98 0.40 1 |
1000.0 | 0.00 8.05 -0.34 13 | -9.60 -0.51 21
| 0.00 -2.57 0.40 1 |
1250.0 | 0.00 4.31 -0.51 21 | -14.71 -0.34 13
| 0.00 -1.17 0.40 1 |
1500.0 | 0.00 1.47 0.62 12 | -19.92 -0.34 13
| 0.00 -0.23 -0.40 2 |
1750.0 | 0.00 0.92 0.69 20 | -25.14 -0.34 13
| 0.00 -4.77 -0.34 13 |
2000.0 | 0.00 1.24 0.12 4 | -31.49 -0.34 13
| 0.00 -11.88 -0.34 13 |
2250.0 | 0.00 4.43 0.40 1 | -35.95 -0.34 13
| 0.00 -20.28 -0.34 13 |
2500.0 | 0.00 5.83 0.40 1 | -41.78 0.18 11
| 0.00 -29.82 -0.34 13 |
2750.0 | 0.00 7.23 0.40 1 | -47.20 0.18 11
| 0.00 -40.43 -0.34 13 |
3000.0 | 0.00 8.63 0.40 1 | -51.50 0.18 11
| 0.00 -51.98 -0.34 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 302.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 587 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 588
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 13.29 MX = 0.62 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -40.92 MX = 0.18 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 246 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.36 -0.14 2 | 50.22 -9.06 11
| 0.00 -15.48 -9.06 11 |
91.7 | 0.00 2.19 -0.14 2 | 48.68 -9.06 11
| 0.00 -11.38 -7.08 12 |
183.3 | 0.00 0.58 -4.81 21 | 46.91 -9.06 11
| 0.00 -6.57 -9.06 11 |
275.0 | 0.00 2.33 -4.81 21 | 44.98 -9.06 11
| 0.00 -2.36 -9.06 11 |
366.7 | 0.00 3.34 -7.42 13 | 42.85 -9.06 11
| 0.00 -0.39 -7.12 15 |
458.3 | 0.00 5.51 -9.06 11 | 40.82 -9.06 11
| 0.00 -1.32 0.11 4 |
550.0 | 0.00 9.13 -9.06 11 | 38.38 -9.06 11
| 0.00 -1.32 0.14 1 |
641.7 | 0.00 11.41 -7.42 13 | 35.78 -9.06 11
| 0.00 -1.08 0.11 4 |
733.3 | 0.00 13.75 -7.42 13 | 33.74 -9.06 11
| 0.00 -0.09 0.03 7 |
825.0 | 0.00 18.68 -9.06 11 | 31.10 -9.06 11
| 0.00 -0.80 0.14 1 |
916.7 | 0.00 21.43 -9.06 11 | 28.32 -9.06 11
| 0.00 -0.71 0.11 4 |
1008.3 | 0.00 23.95 -9.06 11 | 26.63 -9.06 11
| 0.00 -0.59 0.11 4 |
1100.0 | 0.00 26.23 -9.06 11 | 23.81 -9.06 11
| 0.00 -0.46 0.11 4 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 588 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 589
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 189.81 234.16
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 35.72 MX = -9.06 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 248 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 589 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 590
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.17 0.33 2 | 29.89 0.23 11
| 0.00 -7.54 0.23 11 |
258.3 | 0.00 1.02 0.33 2 | 25.30 0.23 11
| 0.00 -1.60 -0.39 20 |
516.7 | 0.00 5.26 0.59 13 | 18.52 0.23 11
| 0.00 -0.86 -0.33 1 |
775.0 | 0.00 8.25 0.59 13 | 12.06 0.23 11
| 0.00 -0.70 -0.33 1 |
1033.3 | 0.00 11.25 0.23 11 | 1.91 0.59 13
| 0.00 -0.55 -0.33 1 |
1291.7 | 0.00 10.77 0.23 11 | -6.15 0.59 13
| 0.00 -0.10 -0.10 4 |
1550.0 | 0.00 7.70 0.23 11 | -17.40 0.23 11
| 0.00 -0.23 -0.33 1 |
1808.3 | 0.00 1.78 0.23 11 | -28.16 0.23 11
| 0.00 -0.08 -0.33 1 |
2066.7 | 0.00 0.08 -0.33 1 | -39.94 0.23 11
| 0.00 -6.88 0.23 11 |
2325.0 | 0.00 0.24 -0.33 1 | -48.72 0.23 11
| 0.00 -18.14 0.23 11 |
2583.3 | 0.00 0.39 -0.33 1 | -55.37 0.23 11
| 0.00 -31.60 0.23 11 |
2841.7 | 0.00 0.55 -0.33 1 | -62.88 0.23 11
| 0.00 -47.00 0.23 11 |
3100.0 | 0.00 0.71 -0.33 1 | -68.53 0.23 11
| 0.00 -64.01 0.23 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 375.07
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 20.04 MX = 0.23 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 590 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 591
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -51.06 MX = 0.23 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 250 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 42.93 2.87 11 | -13.18 2.87 11
| 0.00 -0.27 0.07 1 |
208.3 | 0.00 39.80 2.87 11 | -16.90 2.87 11
| 0.00 -0.20 0.07 1 |
416.7 | 0.00 35.79 2.87 11 | -21.70 2.87 11
| 0.00 -0.13 0.07 1 |
625.0 | 0.00 24.59 2.30 18 | -26.68 2.87 11
| 0.00 -0.06 0.07 1 |
833.3 | 0.00 19.60 2.39 12 | -32.20 2.87 11
| 0.00 -0.00 -0.07 2 |
1041.7 | 0.00 13.56 2.39 12 | -41.35 2.87 11
| 0.00 -0.07 -0.07 2 |
1250.0 | 0.00 7.64 2.87 11 | -48.44 2.87 11
| 0.00 -0.13 0.01 3 |
1458.3 | 0.00 0.05 0.19 6 | -55.84 2.87 11
| 0.00 -3.20 2.87 11 |
1666.7 | 0.00 0.28 0.07 1 | -65.04 2.87 11
| 0.00 -15.70 2.87 11 |
1875.0 | 0.00 0.35 0.07 1 | -70.81 2.87 11
| 0.00 -29.79 2.87 11 |
2083.3 | 0.00 0.42 0.07 1 | -77.26 2.87 11
| 0.00 -45.23 2.87 11 |
2291.7 | 0.00 0.49 0.07 1 | -82.48 2.87 11
| 0.00 -61.91 2.87 11 |
2500.0 | 0.00 0.55 0.07 1 | -87.38 2.87 11
| 0.00 -79.64 2.87 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 195.15 507.48
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 272.90 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 591 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 592
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = -24.81 MX = 2.87 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 666.4 mm AWAY FROM END SUPPORT
VY = -69.58 MX = 2.87 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 251 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 27.07 0.74 13 | 16.11 0.06 12
| 0.00 -8.00 -0.29 1 |
245.8 | 0.00 22.10 0.70 21 | 12.60 0.06 12
| 0.00 -6.65 -0.29 1 |
491.7 | 0.00 26.61 0.74 13 | -8.61 0.70 21
| 0.00 -0.46 -0.04 4 |
737.5 | 0.00 24.87 0.50 11 | -11.75 0.70 21
| 0.00 -0.34 -0.04 4 |
983.3 | 0.00 22.66 0.50 11 | -16.29 0.74 13
| 0.00 -2.58 -0.29 1 |
1229.2 | 0.00 16.16 0.74 13 | -25.42 0.74 13
| 0.00 -1.23 -0.29 1 |
1475.0 | 0.00 11.66 0.50 11 | -32.36 0.74 13
| 0.00 -0.01 0.03 8 |
1720.8 | 0.00 3.81 0.06 12 | -40.85 0.50 11
| 0.00 -1.36 0.70 21 |
1966.7 | 0.00 2.84 -0.29 1 | -52.27 0.50 11
| 0.00 -8.98 0.50 11 |
2212.5 | 0.00 4.19 -0.29 1 | -59.10 0.50 11
| 0.00 -23.11 0.74 13 |
2458.3 | 0.00 5.55 -0.29 1 | -65.31 0.50 11
| 0.00 -37.96 0.50 11 |
2704.2 | 0.00 6.90 -0.29 1 | -71.84 0.50 11
| 0.00 -54.90 0.50 11 |
2950.0 | 0.00 8.26 -0.29 1 | -76.22 0.50 11
| 0.00 -73.10 0.50 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 592 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 593
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 436.19
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = -9.07 MX = 0.70 LD= 21
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 252 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 593 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 594
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.78 -0.16 1 | 49.39 0.53 11
| 0.00 -33.10 0.61 13 |
264.6 | 0.00 8.13 -0.16 1 | 44.68 0.53 11
| 0.00 -21.15 0.61 13 |
529.2 | 0.00 6.47 -0.16 1 | 37.63 0.61 13
| 0.00 -6.47 0.16 2 |
793.8 | 0.00 9.09 0.02 20 | 32.27 0.61 13
| 0.00 -5.35 0.50 21 |
1058.3 | 0.00 14.00 0.23 12 | 25.04 0.61 13
| 0.00 -3.16 0.16 2 |
1322.9 | 0.00 17.22 0.53 11 | 16.53 0.61 13
| 0.00 -0.14 0.02 8 |
1587.5 | 0.00 18.82 0.53 11 | 10.67 0.50 21
| 0.00 -0.16 -0.16 1 |
1852.1 | 0.00 13.99 0.43 18 | -15.83 0.23 12
| 0.00 -0.34 -0.10 4 |
2116.7 | 0.00 13.23 0.53 11 | -24.33 0.23 12
| 0.00 -3.47 -0.16 1 |
2381.2 | 0.00 11.58 0.50 21 | -30.06 0.53 11
| 0.00 -5.13 -0.16 1 |
2645.8 | 0.00 10.39 0.50 21 | -36.76 0.53 11
| 0.00 -10.04 0.23 12 |
2910.4 | 0.00 8.28 0.50 21 | -43.79 0.53 11
| 0.00 -20.60 0.23 12 |
3175.0 | 0.00 10.10 0.16 2 | -48.51 0.53 11
| 0.00 -32.35 0.23 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 193.20 178.08 178.08 178.08 185.17
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 35.79 MX = 0.61 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 594 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 595
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -33.16 MX = 0.53 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 254 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.97 -0.20 2 | 30.74 -1.99 11
| 0.00 -23.38 -1.99 11 |
291.7 | 0.00 -7.14 -0.96 23 | 29.32 -1.99 11
| 0.00 -14.62 -1.99 11 |
583.3 | 0.00 0.63 -0.20 2 | 26.05 -1.99 11
| 0.00 -6.56 -1.99 11 |
875.0 | 0.00 0.99 -1.83 13 | 22.01 -1.99 11
| 0.00 -0.13 -1.35 12 |
1166.7 | 0.00 6.33 -1.99 11 | 16.63 -1.99 11
| 0.00 -0.30 0.20 1 |
1458.3 | 0.00 10.40 -1.99 11 | 10.31 -1.99 11
| 0.00 -0.13 0.20 1 |
1750.0 | 0.00 12.54 -1.99 11 | 3.78 -1.99 11
| 0.00 -0.03 -0.20 2 |
2041.7 | 0.00 12.60 -1.99 11 | -2.76 -1.99 11
| 0.00 -0.20 -0.20 2 |
2333.3 | 0.00 10.73 -1.99 11 | -9.08 -1.99 11
| 0.00 -0.37 -0.20 2 |
2625.0 | 0.00 7.14 -1.99 11 | -14.46 -1.99 11
| 0.00 -0.53 -0.20 2 |
2916.7 | 0.00 2.25 -1.99 11 | -18.50 -1.99 11
| 0.00 -0.72 -1.29 21 |
3208.3 | 0.00 0.87 0.20 1 | -21.42 -1.99 11
| 0.00 -3.93 -1.83 13 |
3500.0 | 0.00 1.03 0.20 1 | -23.19 -1.99 11
| 0.00 -10.17 -1.99 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 595 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 596
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 25.88 MX = -1.99 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -17.69 MX = -1.99 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 255 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.30 -0.39 3 | 57.46 -3.23 11
| 0.00 -49.52 -3.23 11 |
116.7 | 0.00 0.29 -0.39 3 | 56.97 -3.23 11
| 0.00 -42.85 -3.23 11 |
233.3 | 0.00 0.34 -0.37 2 | 56.20 -3.23 11
| 0.00 -36.25 -3.23 11 |
350.0 | 0.00 0.37 -0.37 2 | 55.26 -3.23 11
| 0.00 -23.35 -3.03 13 |
466.7 | 0.00 -11.17 -1.07 23 | 54.06 -3.23 11
| 0.00 -23.36 -3.23 11 |
583.3 | 0.00 0.43 -0.37 2 | 52.99 -3.23 11
| 0.00 -17.11 -3.23 11 |
700.0 | 0.00 0.45 -0.37 2 | 51.43 -3.23 11
| 0.00 -8.28 -3.03 13 |
816.7 | 0.00 0.48 -0.37 2 | 49.68 -3.23 11
| 0.00 -5.11 -3.23 11 |
933.3 | 0.00 1.11 -3.03 13 | 48.61 -3.23 11
| 0.00 -0.12 -2.14 12 |
1050.0 | 0.00 6.16 -3.23 11 | 46.81 -3.23 11
| 0.00 -0.54 0.37 1 |
1166.7 | 0.00 11.55 -3.23 11 | 44.85 -3.23 11
| 0.00 -0.57 0.37 1 |
1283.3 | 0.00 16.74 -3.23 11 | 44.18 -3.23 11
| 0.00 -0.59 0.37 1 |
1400.0 | 0.00 21.73 -3.23 11 | 42.18 -3.23 11
| 0.00 -0.62 0.37 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 596 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 597
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 317.17 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 51.96 MX = -3.23 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 256 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 125.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 597 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 598
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.40 0.28 1 | 81.13 5.06 11
| 0.00 -50.28 5.06 11 |
10.4 | 0.00 5.36 0.28 1 | 81.09 5.06 11
| 0.00 -45.98 3.72 13 |
20.8 | 0.00 5.31 0.28 1 | 81.04 5.06 11
| 0.00 -48.59 5.06 11 |
31.3 | 0.00 5.27 0.28 1 | 81.00 5.06 11
| 0.00 -47.75 5.06 11 |
41.7 | 0.00 5.23 0.28 1 | 80.95 5.06 11
| 0.00 -46.91 5.06 11 |
52.1 | 0.00 5.18 0.28 1 | 80.91 5.06 11
| 0.00 -43.07 3.72 13 |
62.5 | 0.00 5.14 0.28 1 | 80.86 5.06 11
| 0.00 -36.15 4.05 19 |
72.9 | 0.00 5.10 0.28 1 | 80.82 5.06 11
| 0.00 -44.38 5.06 11 |
83.3 | 0.00 0.46 0.02 7 | 80.77 5.06 11
| 0.00 -43.54 5.06 11 |
93.8 | 0.00 5.01 0.28 1 | 80.72 5.06 11
| 0.00 -42.70 5.06 11 |
104.2 | 0.00 4.97 0.28 1 | 80.67 5.06 11
| 0.00 -41.85 5.06 11 |
114.6 | 0.00 4.92 0.28 1 | 80.63 5.06 11
| 0.00 -41.01 5.06 11 |
125.0 | 0.00 4.88 0.28 1 | 80.58 5.06 11
| 0.00 -40.17 5.06 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 339.41 323.90 244.01 293.20 278.01
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 31.3 mm 62.5 mm 93.8 mm 125.0 mm
----------------------------------------------------------------------------
TOP 5-10í 5-10í 4-10í 4-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = 149.27 MX = 5.06 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 598 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 599
============================================================================
B E A M N O. 257 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.15 0.30 1 | 15.55 -1.51 11
| 0.00 -2.21 -1.51 11 |
262.5 | 0.00 1.70 -1.51 11 | 14.12 -1.51 11
| 0.00 -0.23 -0.30 2 |
525.0 | 0.00 3.70 -1.58 13 | 11.29 -1.51 11
| 0.00 -0.32 -0.30 2 |
787.5 | 0.00 7.72 -1.51 11 | 8.32 -1.51 11
| 0.00 -0.40 -0.30 2 |
1050.0 | 0.00 7.82 -1.13 15 | 4.85 -1.51 11
| 0.00 -0.48 -0.30 2 |
1312.5 | 0.00 8.36 -1.13 15 | -0.81 -1.58 13
| 0.00 -0.56 -0.30 2 |
1575.0 | 0.00 9.38 -1.51 11 | -4.79 -1.51 11
| 0.00 -0.64 -0.30 2 |
1837.5 | 0.00 7.50 -1.51 11 | -9.03 -1.51 11
| 0.00 -0.02 -0.00 9 |
2100.0 | 0.00 4.39 -1.51 11 | -14.42 -1.51 11
| 0.00 -0.81 -0.30 2 |
2362.5 | 0.00 0.18 -1.51 11 | -17.90 -1.51 11
| 0.00 -1.81 -1.17 21 |
2625.0 | 0.00 0.97 0.30 1 | -20.87 -1.51 11
| 0.00 -5.14 -1.58 13 |
2887.5 | 0.00 1.05 0.30 1 | -23.70 -1.51 11
| 0.00 -10.87 -1.51 11 |
3150.0 | 0.00 1.14 0.30 1 | -25.12 -1.51 11
| 0.00 -17.29 -1.51 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 599 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 600
============================================================================
B E A M N O. 258 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.65 -0.34 1 | 24.84 4.95 11
| 0.00 -17.79 4.95 11 |
258.3 | 0.00 1.48 -0.34 1 | 23.43 4.95 11
| 0.00 -11.54 4.95 11 |
516.7 | 0.00 1.30 -0.34 1 | 20.65 4.95 11
| 0.00 -6.19 4.37 13 |
775.0 | 0.00 0.74 3.55 12 | 17.79 4.95 11
| 0.00 -1.96 4.37 13 |
1033.3 | 0.00 3.83 3.55 12 | 14.39 4.95 11
| 0.00 -0.95 0.34 2 |
1291.7 | 0.00 6.43 4.95 11 | 9.13 4.95 11
| 0.00 -0.35 0.27 3 |
1550.0 | 0.00 8.32 4.95 11 | 4.98 4.95 11
| 0.00 -0.60 0.34 2 |
1808.3 | 0.00 9.01 4.95 11 | 0.84 4.95 11
| 0.00 -0.42 0.34 2 |
2066.7 | 0.00 8.51 4.95 11 | -4.42 4.95 11
| 0.00 -0.24 0.34 2 |
2325.0 | 0.00 6.96 4.95 11 | -7.83 4.95 11
| 0.00 -0.07 0.34 2 |
2583.3 | 0.00 4.51 4.95 11 | -10.69 4.95 11
| 0.00 -0.11 -0.34 1 |
2841.7 | 0.00 1.33 4.95 11 | -13.47 4.95 11
| 0.00 -0.28 -0.34 1 |
3100.0 | 0.00 0.46 0.34 2 | -14.87 4.95 11
| 0.00 -2.35 4.95 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 600 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 601
============================================================================
B E A M N O. 259 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 25.99 3.73 11 | -10.33 3.73 11
| 0.00 -0.00 -0.21 2 |
262.5 | 0.00 23.13 3.73 11 | -11.50 3.73 11
| 0.00 -0.02 0.21 1 |
525.0 | 0.00 19.87 3.73 11 | -13.57 3.73 11
| 0.00 -0.03 0.21 1 |
787.5 | 0.00 16.09 3.73 11 | -15.51 3.73 11
| 0.00 -0.01 0.02 7 |
1050.0 | 0.00 11.69 3.73 11 | -17.71 3.73 11
| 0.00 -0.07 0.21 1 |
1312.5 | 0.00 6.54 3.73 11 | -21.83 3.73 11
| 0.00 -0.01 0.02 4 |
1575.0 | 0.00 0.49 3.73 11 | -24.79 3.73 11
| 0.00 -0.15 2.19 20 |
1837.5 | 0.00 0.12 -0.21 2 | -27.76 3.73 11
| 0.00 -6.48 3.73 11 |
2100.0 | 0.00 0.01 -0.02 8 | -31.87 3.73 11
| 0.00 -11.64 3.23 12 |
2362.5 | 0.00 0.16 -0.21 2 | -34.07 3.73 11
| 0.00 -22.96 3.73 11 |
2625.0 | 0.00 0.18 -0.21 2 | -36.01 3.73 11
| 0.00 -32.19 3.73 11 |
2887.5 | 0.00 0.19 -0.21 2 | -38.08 3.73 11
| 0.00 -41.95 3.73 11 |
3150.0 | 0.00 0.21 -0.21 2 | -39.25 3.73 11
| 0.00 -52.10 3.73 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 337.02
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 181.65 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 601 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 602
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = -14.49 MX = 3.73 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 260 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.42 -0.08 1 | 43.28 -0.06 11
| 0.00 -57.34 0.05 13 |
258.3 | 0.00 4.92 -0.15 4 | 42.12 -0.06 11
| 0.00 -41.91 0.13 14 |
516.7 | 0.00 7.68 -0.08 1 | 40.10 -0.06 11
| 0.00 -32.42 0.13 14 |
775.0 | 0.00 3.29 -0.15 4 | 38.21 -0.06 11
| 0.00 -26.93 0.05 13 |
1033.3 | 0.00 4.93 -0.08 1 | 36.06 -0.06 11
| 0.00 -17.63 0.05 13 |
1291.7 | 0.00 2.11 -0.11 20 | 32.06 -0.06 11
| 0.00 -8.92 0.05 13 |
1550.0 | 0.00 2.12 -0.21 23 | 29.72 0.05 13
| 0.00 -2.43 0.13 21 |
1808.3 | 0.00 7.45 -0.22 15 | 27.41 0.05 13
| 0.00 -0.81 0.08 2 |
2066.7 | 0.00 15.49 -0.06 11 | 24.21 0.05 13
| 0.00 -0.05 -0.01 7 |
2325.0 | 0.00 21.00 -0.06 11 | 22.49 0.05 13
| 0.00 -1.94 -0.08 1 |
2583.3 | 0.00 25.93 -0.06 11 | 20.98 0.05 13
| 0.00 -3.32 -0.08 1 |
2841.7 | 0.00 30.35 -0.06 11 | 19.36 0.05 13
| 0.00 -4.69 -0.08 1 |
3100.0 | 0.00 34.79 0.05 13 | 18.44 0.05 13
| 0.00 -6.07 -0.08 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 332.93 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 197.66
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 602 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 603
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 39.12 MX = -0.06 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = 21.12 MX = 0.05 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 261 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1400.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.73 -0.10 4 | 38.37 -4.10 11
| 0.00 -30.87 -4.10 11 |
116.7 | 0.00 0.70 -0.10 4 | 37.88 -4.10 11
| 0.00 -26.42 -4.10 11 |
233.3 | 0.00 0.12 0.35 2 | 37.21 -4.10 11
| 0.00 -22.04 -4.10 11 |
350.0 | 0.00 0.64 -0.10 4 | 36.57 -4.10 11
| 0.00 -17.73 -4.10 11 |
466.7 | 0.00 0.62 -0.10 4 | 35.88 -4.10 11
| 0.00 -13.51 -4.10 11 |
583.3 | 0.00 0.59 -0.10 4 | 34.80 -4.10 11
| 0.00 -7.63 -3.70 12 |
700.0 | 0.00 0.56 -0.10 4 | 33.96 -4.10 11
| 0.00 -5.36 -4.10 11 |
816.7 | 0.00 0.17 -2.02 23 | 33.12 -4.10 11
| 0.00 -1.27 -3.70 12 |
933.3 | 0.00 2.34 -4.10 11 | 32.05 -4.10 11
| 0.00 -0.50 0.10 3 |
1050.0 | 0.00 6.04 -4.10 11 | 31.35 -4.10 11
| 0.00 -0.08 -0.35 1 |
1166.7 | 0.00 9.66 -4.10 11 | 30.71 -4.10 11
| 0.00 -0.08 -0.35 1 |
1283.3 | 0.00 13.20 -4.10 11 | 30.04 -4.10 11
| 0.00 -0.07 -0.35 1 |
1400.0 | 0.00 16.68 -4.10 11 | 29.55 -4.10 11
| 0.00 -0.07 -0.35 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 603 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 604
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 213.83 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 350.0 mm 700.0 mm 1050.0 mm 1400.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 34.21 MX = -4.10 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 262 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 604 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 605
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.08 -0.06 1 | 15.33 0.57 11
| 0.00 -8.30 0.57 11 |
285.4 | 0.00 0.07 -0.06 1 | 14.06 0.57 11
| 0.00 -3.37 0.53 13 |
570.8 | 0.00 -0.17 0.27 23 | 11.85 0.57 11
| 0.00 -0.40 0.57 11 |
856.3 | 0.00 2.68 0.57 11 | 9.78 0.57 11
| 0.00 -0.06 0.06 2 |
1141.7 | 0.00 4.99 0.57 11 | 5.96 0.57 11
| 0.00 -0.01 0.01 3 |
1427.1 | 0.00 6.33 0.57 11 | 3.08 0.57 11
| 0.00 -0.04 0.06 2 |
1712.5 | 0.00 6.59 0.57 11 | -1.14 0.57 11
| 0.00 -0.03 0.06 2 |
1997.9 | 0.00 5.68 0.57 11 | -5.35 0.57 11
| 0.00 -0.00 0.01 8 |
2283.3 | 0.00 3.69 0.57 11 | -8.23 0.57 11
| 0.00 -0.01 0.06 2 |
2568.8 | 0.00 0.74 0.57 11 | -12.05 0.57 11
| 0.00 -0.00 0.06 2 |
2854.2 | 0.00 0.01 0.06 2 | -14.12 0.57 11
| 0.00 -2.99 0.57 11 |
3139.6 | 0.00 0.01 0.06 2 | -16.33 0.57 11
| 0.00 -7.35 0.57 11 |
3425.0 | 0.00 0.02 0.06 2 | -17.61 0.57 11
| 0.00 -12.19 0.57 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 12.08 MX = 0.57 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 605 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 606
============================================================================
B E A M N O. 263 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3750.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.66 -0.68 2 | 25.16 1.79 12
| 0.00 -28.27 1.79 12 |
312.5 | 0.00 0.51 -0.06 8 | 24.04 1.79 12
| 0.00 -20.58 1.79 12 |
625.0 | 0.00 4.47 -0.68 2 | 22.06 1.79 12
| 0.00 -13.38 1.79 12 |
937.5 | 0.00 3.38 -0.68 2 | 20.21 1.79 12
| 0.00 -7.14 1.70 20 |
1250.0 | 0.00 4.20 -0.33 21 | 16.75 1.79 12
| 0.00 -2.66 1.70 20 |
1562.5 | 0.00 5.91 0.59 14 | 14.16 1.79 12
| 0.00 -1.20 0.68 1 |
1875.0 | 0.00 9.54 1.23 11 | 9.96 1.79 12
| 0.00 -0.10 0.68 1 |
2187.5 | 0.00 9.43 1.37 15 | 6.68 1.70 20
| 0.00 -0.99 -0.68 2 |
2500.0 | 0.00 11.43 1.79 12 | 5.07 1.70 20
| 0.00 -1.01 -0.32 3 |
2812.5 | 0.00 11.88 1.79 12 | 2.98 1.70 20
| 0.00 -3.17 -0.68 2 |
3125.0 | 0.00 11.52 1.79 12 | -7.92 1.23 11
| 0.00 -4.27 -0.68 2 |
3437.5 | 0.00 11.18 1.70 20 | -10.39 1.23 11
| 0.00 -5.36 -0.68 2 |
3750.0 | 0.00 11.20 1.70 20 | -11.79 1.23 11
| 0.00 -8.15 -0.33 21 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 937.5 mm 1875.0 mm 2812.5 mm 3750.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 606 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 607
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 22.57 MX = 1.79 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -7.61 MX = 1.23 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 264 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.75 -0.71 20 | 8.60 0.28 21
| 0.00 -5.05 0.33 2 |
287.5 | 0.00 10.02 -0.68 12 | 7.84 0.28 21
| 0.00 -3.85 0.33 2 |
575.0 | 0.00 9.26 -0.68 12 | -5.90 -0.71 20
| 0.00 -2.65 0.33 2 |
862.5 | 0.00 7.98 -0.68 12 | -7.05 -0.71 20
| 0.00 -0.66 0.15 3 |
1150.0 | 0.00 7.22 -0.35 11 | -8.34 -0.71 20
| 0.00 -0.25 0.33 2 |
1437.5 | 0.00 5.67 -0.35 11 | -11.36 -0.68 12
| 0.00 -0.95 -0.33 1 |
1725.0 | 0.00 4.41 0.28 21 | -14.12 -0.68 12
| 0.00 -2.04 -0.71 20 |
2012.5 | 0.00 4.19 0.28 21 | -16.88 -0.68 12
| 0.00 -5.86 -0.71 20 |
2300.0 | 0.00 4.55 0.33 2 | -20.74 -0.68 12
| 0.00 -10.24 -0.71 20 |
2587.5 | 0.00 5.75 0.33 2 | -22.76 -0.68 12
| 0.00 -16.38 -0.68 12 |
2875.0 | 0.00 6.95 0.33 2 | -24.54 -0.68 12
| 0.00 -23.22 -0.68 12 |
3162.5 | 0.00 8.15 0.33 2 | -26.44 -0.68 12
| 0.00 -30.58 -0.68 12 |
3450.0 | 0.00 9.35 0.33 2 | -27.48 -0.68 12
| 0.00 -38.33 -0.68 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 224.03
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 607 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 608
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 862.5 mm 1725.0 mm 2587.5 mm 3450.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = -5.76 MX = -0.71 LD= 20
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 265 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.67 -0.35 2 | 45.01 -0.58 11
| 0.00 -60.07 -0.58 11 |
208.3 | 0.00 0.15 -0.03 8 | 44.10 -0.58 11
| 0.00 -40.64 -0.47 18 |
416.7 | 0.00 1.43 -0.35 2 | 42.63 -0.58 11
| 0.00 -41.74 -0.58 11 |
625.0 | 0.00 0.13 -0.03 8 | 41.23 -0.58 11
| 0.00 -32.99 -0.58 11 |
833.3 | 0.00 1.19 -0.35 2 | 39.68 -0.58 11
| 0.00 -19.80 -0.42 16 |
1041.7 | 0.00 0.10 -0.03 8 | 36.91 -0.58 11
| 0.00 -16.58 -0.58 11 |
1250.0 | 0.00 0.09 -0.03 8 | 34.88 -0.58 11
| 0.00 -9.07 -0.58 11 |
1458.3 | 0.00 0.20 -0.30 6 | 32.84 -0.58 11
| 0.00 -2.65 0.45 20 |
1666.7 | 0.00 4.44 -0.88 13 | 30.07 -0.58 11
| 0.00 -0.71 0.35 1 |
1875.0 | 0.00 10.61 -0.58 11 | 28.52 -0.58 11
| 0.00 -0.59 0.35 1 |
2083.3 | 0.00 16.39 -0.58 11 | 27.12 -0.58 11
| 0.00 -0.47 0.35 1 |
2291.7 | 0.00 21.87 -0.58 11 | 25.65 -0.58 11
| 0.00 -0.35 0.35 1 |
2500.0 | 0.00 27.12 -0.58 11 | 24.74 -0.58 11
| 0.00 -0.23 0.35 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 608 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 609
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 354.18 191.70 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 41.87 MX = -0.58 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 266 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 609 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 610
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 19.43 -0.27 11 | -31.69 -0.27 11
| 0.00 -0.72 -0.26 2 |
91.7 | 0.00 16.50 -0.27 11 | -32.07 -0.27 11
| 0.00 -0.82 -0.26 2 |
183.3 | 0.00 13.54 -0.27 11 | -32.56 -0.27 11
| 0.00 -0.93 -0.26 2 |
275.0 | 0.00 10.54 -0.27 11 | -33.03 -0.27 11
| 0.00 -0.01 0.00 10 |
366.7 | 0.00 7.49 -0.27 11 | -33.54 -0.27 11
| 0.00 -0.11 -0.03 8 |
458.3 | 0.00 4.62 0.15 20 | -34.28 -0.27 11
| 0.00 -0.12 -0.03 8 |
550.0 | 0.00 2.57 0.10 12 | -34.88 -0.27 11
| 0.00 -0.78 -0.64 21 |
641.7 | 0.00 1.79 0.15 20 | -35.48 -0.27 11
| 0.00 -3.33 -0.53 13 |
733.3 | 0.00 1.54 0.26 1 | -36.22 -0.27 11
| 0.00 -6.08 -0.53 13 |
825.0 | 0.00 1.64 0.26 1 | -36.72 -0.27 11
| 0.00 -8.88 -0.53 13 |
916.7 | 0.00 1.74 0.26 1 | -37.20 -0.27 11
| 0.00 -11.71 -0.53 13 |
1008.3 | 0.00 1.84 0.26 1 | -37.69 -0.27 11
| 0.00 -15.47 -0.27 11 |
1100.0 | 0.00 1.94 0.26 1 | -38.07 -0.27 11
| 0.00 -18.94 -0.27 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -34.12 MX = -0.27 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 610 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 611
============================================================================
B E A M N O. 267 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.22 -0.15 1 | 26.86 0.92 13
| 0.00 -36.98 0.92 13 |
264.6 | 0.00 10.68 -0.15 1 | 25.91 0.92 13
| 0.00 -27.77 0.66 21 |
529.2 | 0.00 5.14 0.22 20 | 24.23 0.92 13
| 0.00 -22.32 0.66 21 |
793.8 | 0.00 7.62 -0.15 1 | 22.66 0.92 13
| 0.00 -17.10 0.92 13 |
1058.3 | 0.00 5.97 0.22 20 | 20.88 0.92 13
| 0.00 -12.30 0.66 21 |
1322.9 | 0.00 5.85 0.22 20 | 17.54 0.92 13
| 0.00 -7.83 0.66 21 |
1587.5 | 0.00 5.39 0.57 12 | 15.14 0.92 13
| 0.00 -3.81 0.66 21 |
1852.1 | 0.00 4.44 0.93 11 | 12.74 0.92 13
| 0.00 -1.50 0.15 2 |
2116.7 | 0.00 5.77 0.93 11 | 9.40 0.92 13
| 0.00 -0.02 0.21 3 |
2381.2 | 0.00 6.93 0.92 13 | 9.73 0.66 21
| 0.00 -1.57 -0.15 1 |
2645.8 | 0.00 8.71 0.92 13 | 8.70 0.66 21
| 0.00 -3.10 -0.15 1 |
2910.4 | 0.00 10.07 0.92 13 | -9.51 0.57 12
| 0.00 -4.63 -0.15 1 |
3175.0 | 0.00 12.12 0.66 21 | -10.46 0.57 12
| 0.00 -6.36 0.22 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 218.98 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 611 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 612
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = 8.74 MX = 0.66 LD= 21
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 268 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.64 1.88 13 | 21.74 2.11 11
| 0.00 -0.31 1.60 15 |
291.7 | 0.00 6.34 2.11 11 | 20.21 2.11 11
| 0.00 -0.39 -0.16 1 |
583.3 | 0.00 9.90 1.88 13 | 16.86 2.11 11
| 0.00 -0.39 -0.16 1 |
875.0 | 0.00 13.04 1.70 17 | 13.48 2.11 11
| 0.00 -0.34 -0.08 4 |
1166.7 | 0.00 16.09 1.88 13 | 8.04 2.11 11
| 0.00 -0.39 -0.16 1 |
1458.3 | 0.00 21.35 2.11 11 | 3.62 2.11 11
| 0.00 -0.38 -0.16 1 |
1750.0 | 0.00 17.78 1.88 13 | -1.79 2.11 11
| 0.00 -0.38 -0.16 1 |
2041.7 | 0.00 20.30 2.11 11 | -7.20 2.11 11
| 0.00 -0.38 -0.16 1 |
2333.3 | 0.00 17.44 2.11 11 | -11.62 2.11 11
| 0.00 -0.24 -0.08 4 |
2625.0 | 0.00 13.12 2.11 11 | -17.06 2.11 11
| 0.00 -0.38 -0.16 1 |
2916.7 | 0.00 7.61 2.11 11 | -20.44 2.11 11
| 0.00 -0.38 -0.16 1 |
3208.3 | 0.00 1.12 2.11 11 | -23.79 2.11 11
| 0.00 -0.38 -0.16 1 |
3500.0 | 0.00 0.38 0.16 2 | -25.33 2.11 11
| 0.00 -6.05 2.11 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 612 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 613
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 269 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.03 -0.39 1 | 22.07 -2.76 11
| 0.00 -1.91 -2.76 11 |
289.6 | 0.00 3.36 -2.29 15 | 20.41 -2.76 11
| 0.00 -0.06 -0.39 1 |
579.2 | 0.00 9.78 -2.76 11 | 17.31 -2.76 11
| 0.00 -0.16 -0.39 1 |
868.7 | 0.00 14.33 -2.76 11 | 13.43 -2.76 11
| 0.00 -0.25 -0.39 1 |
1158.3 | 0.00 17.59 -2.76 11 | 9.23 -2.76 11
| 0.00 -0.03 -0.04 7 |
1447.9 | 0.00 19.34 -2.76 11 | 3.41 -2.76 11
| 0.00 -0.43 -0.39 1 |
1737.5 | 0.00 15.65 -2.21 18 | -1.94 -2.76 11
| 0.00 -0.53 -0.39 1 |
2027.1 | 0.00 18.21 -2.76 11 | -7.30 -2.76 11
| 0.00 -0.62 -0.39 1 |
2316.7 | 0.00 13.12 -1.75 13 | -13.11 -2.76 11
| 0.00 -0.71 -0.39 1 |
2606.2 | 0.00 10.96 -2.76 11 | -17.32 -2.76 11
| 0.00 -0.80 -0.39 1 |
2895.8 | 0.00 5.28 -2.76 11 | -21.20 -2.76 11
| 0.00 -0.90 -0.39 1 |
3185.4 | 0.00 0.09 -1.75 13 | -24.30 -2.76 11
| 0.00 -2.28 -2.67 12 |
3475.0 | 0.00 1.08 0.39 2 | -25.96 -2.76 11
| 0.00 -8.67 -2.76 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 613 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 614
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -22.86 MX = -2.76 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 270 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.34 -16.56 11 | -10.86 -16.56 11
| 0.00 -0.32 1.09 2 |
27.1 | 0.00 1.04 -16.56 11 | -10.97 -16.56 11
| 0.00 -0.35 1.09 2 |
54.2 | 0.00 1.04 -14.56 12 | -11.09 -16.56 11
| 0.00 -0.12 -7.10 21 |
81.2 | 0.00 0.40 -13.38 16 | -11.21 -16.56 11
| 0.00 -0.12 -11.94 13 |
108.3 | 0.00 0.14 -16.56 11 | -11.35 -16.56 11
| 0.00 -0.00 -13.04 14 |
135.4 | 0.00 0.39 -14.56 12 | -11.45 -16.56 11
| 0.00 -0.17 -16.56 11 |
162.5 | 0.00 0.17 -14.56 12 | -11.60 -16.56 11
| 0.00 -0.49 -16.56 11 |
189.6 | 0.00 0.42 -10.38 20 | -11.76 -16.56 11
| 0.00 -0.80 -16.56 11 |
216.7 | 0.00 0.30 -10.38 20 | -11.86 -16.56 11
| 0.00 -1.12 -16.56 11 |
243.8 | 0.00 0.18 -10.38 20 | -12.03 -16.56 11
| 0.00 -1.45 -16.56 11 |
270.8 | 0.00 0.06 -10.38 20 | -12.21 -16.56 11
| 0.00 -1.77 -16.56 11 |
297.9 | 0.00 0.59 -1.09 1 | -12.32 -16.56 11
| 0.00 -2.10 -16.56 11 |
325.0 | 0.00 0.61 -1.09 1 | -12.51 -16.56 11
| 0.00 -2.44 -16.56 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 614 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 615
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 178.50 234.96 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 291.66 244.62 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.2 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 4-10í 4-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 271 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3425.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 4.10 0.05 1 | 44.90 -0.46 11
| 0.00 -52.44 -0.46 11 |
285.4 | 0.00 3.61 0.05 1 | 43.52 -0.46 11
| 0.00 -39.82 -0.46 11 |
570.8 | 0.00 3.12 0.05 1 | 40.41 -0.46 11
| 0.00 -26.03 -0.43 13 |
856.3 | 0.00 2.62 0.05 1 | 36.54 -0.46 11
| 0.00 -13.68 -0.37 14 |
1141.7 | 0.00 2.13 0.05 1 | 31.49 -0.46 11
| 0.00 -8.18 -0.43 13 |
1427.1 | 0.00 2.92 -0.31 12 | 25.46 -0.46 11
| 0.00 -2.06 -0.29 21 |
1712.5 | 0.00 7.58 -0.46 11 | 18.94 -0.46 11
| 0.00 -1.14 -0.05 2 |
1997.9 | 0.00 12.01 -0.46 11 | 12.41 -0.46 11
| 0.00 -0.65 -0.05 2 |
2283.3 | 0.00 14.60 -0.46 11 | 7.19 -0.43 13
| 0.00 -0.16 -0.05 2 |
2568.8 | 0.00 15.62 -0.46 11 | 3.14 -0.43 13
| 0.00 -0.34 0.05 1 |
2854.2 | 0.00 15.38 -0.46 11 | -4.10 -0.31 12
| 0.00 -0.83 0.05 1 |
3139.6 | 0.00 14.23 -0.46 11 | -5.64 -0.46 11
| 0.00 -1.32 0.05 1 |
3425.0 | 0.00 12.43 -0.46 11 | -7.02 -0.46 11
| 0.00 -1.81 0.05 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 615 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 616
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 306.28 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 856.3 mm 1712.5 mm 2568.8 mm 3425.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -3.28 MX = -0.31 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 272 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 200.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 616 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 617
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.78 -4.91 1 | 144.49 23.04 11
| 0.00 -105.31 23.04 11 |
16.7 | 0.00 2.67 -4.91 1 | 144.42 23.04 11
| 0.00 -102.90 23.04 11 |
33.3 | 0.00 2.56 -4.91 1 | 144.36 23.04 11
| 0.00 -100.49 23.04 11 |
50.0 | 0.00 2.45 -4.91 1 | 144.28 23.04 11
| 0.00 -98.09 23.04 11 |
66.7 | 0.00 2.34 -4.91 1 | 144.21 23.04 11
| 0.00 -79.35 24.32 13 |
83.3 | 0.00 2.23 -4.91 1 | 144.14 23.04 11
| 0.00 -77.30 24.32 13 |
100.0 | 0.00 1.55 -2.54 4 | 144.06 23.04 11
| 0.00 -90.88 23.04 11 |
116.7 | 0.00 1.48 -2.54 4 | 143.97 23.04 11
| 0.00 -88.48 23.04 11 |
133.3 | 0.00 1.42 -2.54 4 | 143.91 23.04 11
| 0.00 -86.08 23.04 11 |
150.0 | 0.00 1.79 -4.91 1 | 143.82 23.04 11
| 0.00 -83.68 23.04 11 |
166.7 | 0.00 1.68 -4.91 1 | 143.72 23.04 11
| 0.00 -81.28 23.04 11 |
183.3 | 0.00 1.57 -4.91 1 | 143.66 23.04 11
| 0.00 -78.89 23.04 11 |
200.0 | 0.00 1.46 -4.91 1 | 143.56 23.04 11
| 0.00 -76.50 23.04 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 935.17 878.58 823.48 769.78 717.37
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 50.0 mm 100.0 mm 150.0 mm 200.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 80 mm c/c @ 80 mm c/c @ 80 mm c/c @ 80 mm c/c @ 80 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 540.0 mm AWAY FROM END SUPPORT
VY = 202.29 MX = 23.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 617 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 618
============================================================================
B E A M N O. 275 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.21 -0.09 1 | 18.07 0.93 11
| 0.00 -6.59 0.93 11 |
262.5 | 0.00 0.19 -0.09 1 | 16.52 0.93 11
| 0.00 -1.85 0.85 13 |
525.0 | 0.00 2.04 0.93 11 | 13.97 0.93 11
| 0.00 -0.32 0.11 6 |
787.5 | 0.00 5.35 0.93 11 | 11.03 0.93 11
| 0.00 -0.16 0.09 2 |
1050.0 | 0.00 7.82 0.93 11 | 7.76 0.93 11
| 0.00 -0.16 -0.00 3 |
1312.5 | 0.00 9.42 0.93 11 | 4.48 0.93 11
| 0.00 -0.13 -0.00 3 |
1575.0 | 0.00 10.17 0.93 11 | 1.20 0.93 11
| 0.00 -0.11 0.09 2 |
1837.5 | 0.00 7.93 0.85 13 | -2.07 0.93 11
| 0.00 -0.09 -0.00 3 |
2100.0 | 0.00 9.08 0.93 11 | -5.35 0.93 11
| 0.00 -0.08 0.09 2 |
2362.5 | 0.00 7.25 0.93 11 | -8.63 0.93 11
| 0.00 -0.06 0.09 2 |
2625.0 | 0.00 4.57 0.93 11 | -11.56 0.93 11
| 0.00 -0.05 0.09 2 |
2887.5 | 0.00 1.14 0.93 11 | -14.11 0.93 11
| 0.00 -0.38 0.60 21 |
3150.0 | 0.00 0.85 0.11 6 | -15.66 0.93 11
| 0.00 -2.79 0.93 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 618 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 619
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 14.12 MX = 0.93 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -11.42 MX = 0.93 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 277 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.06 -0.09 1 | 24.00 -1.05 11
| 0.00 -9.94 -1.05 11 |
289.6 | 0.00 0.05 -0.09 1 | 22.37 -1.05 11
| 0.00 -3.20 -1.05 11 |
579.2 | 0.00 2.88 -1.05 11 | 19.02 -1.05 11
| 0.00 -0.04 0.09 2 |
868.7 | 0.00 7.98 -1.05 11 | 15.18 -1.05 11
| 0.00 -0.03 0.09 2 |
1158.3 | 0.00 11.81 -1.05 11 | 11.60 -1.05 11
| 0.00 -0.02 0.09 2 |
1447.9 | 0.00 13.98 -1.05 11 | 3.92 -1.05 11
| 0.00 -0.00 -0.00 4 |
1737.5 | 0.00 11.47 -0.95 12 | -2.07 -1.05 11
| 0.00 -0.00 0.09 2 |
2027.1 | 0.00 10.19 -0.95 12 | -8.88 -1.05 11
| 0.00 -0.01 -0.09 1 |
2316.7 | 0.00 7.39 -0.84 15 | -16.57 -1.05 11
| 0.00 -0.02 -0.09 1 |
2606.2 | 0.00 3.92 -1.05 11 | -20.30 -1.05 11
| 0.00 -0.03 -0.09 1 |
2895.8 | 0.00 0.04 0.09 2 | -25.45 -1.05 11
| 0.00 -2.84 -1.05 11 |
3185.4 | 0.00 0.04 0.09 2 | -28.44 -1.05 11
| 0.00 -10.72 -1.05 11 |
3475.0 | 0.00 0.05 0.09 2 | -31.01 -1.05 11
| 0.00 -19.41 -1.05 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 619 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 620
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 868.7 mm 1737.5 mm 2606.2 mm 3475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 19.54 MX = -1.05 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -24.57 MX = -1.05 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 279 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 47.03 -2.22 11 | -31.42 -2.22 11
| 0.00 -0.92 0.15 1 |
122.9 | 0.00 43.14 -2.22 11 | -31.97 -2.22 11
| 0.00 -0.93 0.15 1 |
245.8 | 0.00 39.16 -2.22 11 | -32.91 -2.22 11
| 0.00 -0.85 0.12 4 |
368.8 | 0.00 35.06 -2.22 11 | -33.79 -2.22 11
| 0.00 -0.93 0.15 1 |
491.7 | 0.00 24.77 -1.79 17 | -34.78 -2.22 11
| 0.00 -0.94 0.15 1 |
614.6 | 0.00 22.30 -1.96 13 | -36.62 -2.22 11
| 0.00 -0.94 0.15 1 |
737.5 | 0.00 18.66 -1.92 14 | -37.95 -2.22 11
| 0.00 -0.06 0.01 10 |
860.4 | 0.00 14.85 -1.96 13 | -39.28 -2.22 11
| 0.00 -0.95 0.15 1 |
983.3 | 0.00 12.18 -2.22 11 | -41.12 -2.22 11
| 0.00 -1.01 0.12 4 |
1106.3 | 0.00 7.08 -2.22 11 | -42.11 -2.22 11
| 0.00 -1.04 0.12 4 |
1229.2 | 0.00 2.74 -1.92 14 | -43.00 -2.22 11
| 0.00 -0.40 -0.96 23 |
1352.1 | 0.00 0.19 -1.30 22 | -43.93 -2.22 11
| 0.00 -3.51 -2.22 11 |
1475.0 | 0.00 1.12 -0.12 3 | -44.48 -2.22 11
| 0.00 -8.95 -2.22 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 620 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 621
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 291.14 219.78 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -38.53 MX = -2.22 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 281 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 621 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 622
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.06 0.50 2 | 28.14 3.35 11
| 0.00 -25.05 3.35 11 |
258.3 | 0.00 0.31 0.21 3 | 26.74 3.35 11
| 0.00 -17.95 3.35 11 |
516.7 | 0.00 0.03 -0.50 1 | 24.02 3.35 11
| 0.00 -11.35 3.35 11 |
775.0 | 0.00 0.07 -0.50 1 | 21.21 3.35 11
| 0.00 -5.47 3.35 11 |
1033.3 | 0.00 0.55 0.40 6 | 17.88 3.35 11
| 0.00 -0.48 3.35 11 |
1291.7 | 0.00 3.41 3.35 11 | 12.81 3.35 11
| 0.00 -0.15 0.50 2 |
1550.0 | 0.00 4.93 2.93 14 | 8.29 3.35 11
| 0.00 -0.19 0.50 2 |
1808.3 | 0.00 7.69 3.35 11 | 3.77 3.35 11
| 0.00 -0.23 0.50 2 |
2066.7 | 0.00 8.09 3.35 11 | -1.30 3.35 11
| 0.00 -0.12 0.21 3 |
2325.0 | 0.00 7.38 3.35 11 | -4.64 3.35 11
| 0.00 -0.32 0.50 2 |
2583.3 | 0.00 5.78 3.35 11 | -7.45 3.35 11
| 0.00 -0.36 0.50 2 |
2841.7 | 0.00 3.46 3.35 11 | -10.16 3.35 11
| 0.00 -0.40 0.50 2 |
3100.0 | 0.00 0.64 3.35 11 | -11.56 3.35 11
| 0.00 -0.02 3.29 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 22.63 MX = 3.35 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 622 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 623
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -7.20 MX = 3.35 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 282 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 20.10 -0.98 13 | -6.65 -1.20 21
| 0.00 -6.42 0.74 1 |
250.0 | 0.00 18.68 -0.98 13 | -7.35 -1.20 21
| 0.00 -5.29 0.74 1 |
500.0 | 0.00 16.90 -0.98 13 | -8.76 -1.20 21
| 0.00 -4.16 0.74 1 |
750.0 | 0.00 14.56 -0.98 13 | -10.07 -1.20 21
| 0.00 -3.03 0.74 1 |
1000.0 | 0.00 11.57 -0.98 13 | -13.03 -0.98 13
| 0.00 -1.90 0.74 1 |
1250.0 | 0.00 7.70 -0.98 13 | -18.28 -0.98 13
| 0.00 -0.17 0.17 4 |
1500.0 | 0.00 2.78 -0.98 13 | -21.86 -0.98 13
| 0.00 -0.36 -0.74 2 |
1750.0 | 0.00 1.13 1.03 20 | -25.44 -0.98 13
| 0.00 -3.33 -1.20 21 |
2000.0 | 0.00 0.24 0.08 7 | -30.70 -0.98 13
| 0.00 -10.29 -0.98 13 |
2250.0 | 0.00 3.75 0.74 1 | -33.16 -0.98 13
| 0.00 -18.23 -0.98 13 |
2500.0 | 0.00 4.88 0.74 1 | -35.26 -0.98 13
| 0.00 -26.83 -0.98 13 |
2750.0 | 0.00 6.00 0.74 1 | -37.54 -0.98 13
| 0.00 -35.98 -0.98 13 |
3000.0 | 0.00 7.13 0.74 1 | -38.52 -0.98 13
| 0.00 -45.48 -0.98 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 269.53
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 623 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 624
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = -8.80 MX = -1.20 LD= 21
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -34.90 MX = -0.98 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 285 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.21 -3.48 11 | 14.91 -3.48 11
| 0.00 -1.79 0.36 1 |
91.7 | 0.00 10.84 -2.92 14 | 14.53 -3.48 11
| 0.00 -1.66 0.36 1 |
183.3 | 0.00 12.87 -3.48 11 | 13.98 -3.48 11
| 0.00 -1.24 0.12 4 |
275.0 | 0.00 14.12 -3.48 11 | 13.31 -3.48 11
| 0.00 -1.40 0.36 1 |
366.7 | 0.00 15.31 -3.48 11 | 12.50 -3.48 11
| 0.00 -1.27 0.36 1 |
458.3 | 0.00 14.51 -3.22 13 | 11.76 -3.48 11
| 0.00 -1.14 0.36 1 |
550.0 | 0.00 15.02 -2.92 14 | 10.72 -3.48 11
| 0.00 -1.01 0.36 1 |
641.7 | 0.00 18.39 -3.48 11 | 9.56 -3.48 11
| 0.00 -0.80 0.12 4 |
733.3 | 0.00 16.29 -3.22 13 | 8.82 -3.48 11
| 0.00 -0.76 0.36 1 |
825.0 | 0.00 19.97 -3.48 11 | 7.63 -3.48 11
| 0.00 -0.63 0.36 1 |
916.7 | 0.00 20.63 -3.48 11 | 6.34 -3.48 11
| 0.00 -0.50 0.36 1 |
1008.3 | 0.00 21.18 -3.48 11 | 5.85 -3.48 11
| 0.00 -0.37 0.36 1 |
1100.0 | 0.00 21.64 -3.48 11 | 4.54 -3.48 11
| 0.00 -0.24 0.36 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 624 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 625
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 275.0 mm 550.0 mm 825.0 mm 1100.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 9.71 MX = -3.48 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 287 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3100.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 625 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 626
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 14.23 -0.28 11 | 1.65 -0.73 20
| 0.00 -1.42 -0.37 1 |
258.3 | 0.00 12.98 0.22 13 | 0.94 -0.73 20
| 0.00 -0.03 -0.01 10 |
516.7 | 0.00 11.64 -0.10 14 | -1.49 -0.67 12
| 0.00 -1.05 -0.37 1 |
775.0 | 0.00 12.92 -0.28 11 | -3.59 -0.67 12
| 0.00 -0.86 -0.37 1 |
1033.3 | 0.00 10.93 -0.28 11 | -9.89 -0.28 11
| 0.00 -0.67 -0.37 1 |
1291.7 | 0.00 6.72 0.22 13 | -15.17 -0.28 11
| 0.00 -0.48 -0.37 1 |
1550.0 | 0.00 3.06 -0.28 11 | -20.84 -0.28 11
| 0.00 -0.03 -0.10 4 |
1808.3 | 0.00 0.11 0.37 2 | -26.62 -0.28 11
| 0.00 -2.62 -0.67 12 |
2066.7 | 0.00 0.08 -0.37 1 | -33.15 -0.28 11
| 0.00 -8.48 -0.67 12 |
2325.0 | 0.00 0.26 -0.37 1 | -37.48 -0.28 11
| 0.00 -19.70 -0.28 11 |
2583.3 | 0.00 0.45 -0.37 1 | -40.24 -0.28 11
| 0.00 -29.75 -0.28 11 |
2841.7 | 0.00 0.64 -0.37 1 | -43.63 -0.28 11
| 0.00 -40.68 -0.28 11 |
3100.0 | 0.00 0.83 -0.37 1 | -45.67 -0.28 11
| 0.00 -52.24 -0.28 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 303.29
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 775.0 mm 1550.0 mm 2325.0 mm 3100.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 0.07 MX = -0.73 LD= 20
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 626 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 627
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -38.29 MX = -0.28 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 289 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 35.21 2.71 11 | -22.43 2.71 11
| 0.00 -0.13 -0.10 2 |
208.3 | 0.00 30.43 2.71 11 | -23.46 2.71 11
| 0.00 -0.15 -0.10 2 |
416.7 | 0.00 25.36 2.71 11 | -25.27 2.71 11
| 0.00 -0.17 -0.10 2 |
625.0 | 0.00 19.88 2.71 11 | -27.22 2.71 11
| 0.00 -0.19 -0.10 2 |
833.3 | 0.00 11.36 2.29 12 | -29.56 2.71 11
| 0.00 -0.21 -0.10 2 |
1041.7 | 0.00 7.22 2.71 11 | -34.57 2.71 11
| 0.00 -0.23 -0.10 2 |
1250.0 | 0.00 0.11 2.16 15 | -38.07 2.71 11
| 0.00 -0.24 2.71 11 |
1458.3 | 0.00 0.27 -0.01 4 | -41.79 2.71 11
| 0.00 -8.54 2.71 11 |
1666.7 | 0.00 0.29 0.10 1 | -46.83 2.71 11
| 0.00 -17.70 2.71 11 |
1875.0 | 0.00 0.31 0.10 1 | -49.36 2.71 11
| 0.00 -27.68 2.71 11 |
2083.3 | 0.00 0.33 0.10 1 | -52.38 2.71 11
| 0.00 -38.29 2.71 11 |
2291.7 | 0.00 0.35 0.10 1 | -54.51 2.71 11
| 0.00 -49.45 2.71 11 |
2500.0 | 0.00 0.37 0.10 1 | -56.40 2.71 11
| 0.00 -61.04 2.71 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 181.26 381.96
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 225.34 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 627 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 628
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 625.0 mm 1250.0 mm 1875.0 mm 2500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = -25.52 MX = 2.71 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -48.78 MX = 2.71 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 290 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 37.00 1.34 13 | -16.23 1.34 13
| 0.00 -7.65 -0.46 1 |
245.8 | 0.00 32.89 1.34 13 | -17.19 1.34 13
| 0.00 -6.34 -0.46 1 |
491.7 | 0.00 28.44 1.34 13 | -19.41 1.34 13
| 0.00 -5.04 -0.46 1 |
737.5 | 0.00 23.46 1.34 13 | -21.45 1.34 13
| 0.00 -3.74 -0.46 1 |
983.3 | 0.00 17.84 1.34 13 | -23.85 1.34 13
| 0.00 -2.44 -0.46 1 |
1229.2 | 0.00 12.54 0.99 11 | -28.94 1.34 13
| 0.00 -0.10 -0.04 7 |
1475.0 | 0.00 5.18 0.99 11 | -32.42 1.34 13
| 0.00 -0.16 0.46 2 |
1720.8 | 0.00 1.47 -0.46 1 | -35.90 1.34 13
| 0.00 -3.48 0.99 11 |
1966.7 | 0.00 2.77 -0.46 1 | -43.29 0.99 11
| 0.00 -10.99 0.87 14 |
2212.5 | 0.00 4.07 -0.46 1 | -46.29 0.99 11
| 0.00 -24.36 1.34 13 |
2458.3 | 0.00 5.37 -0.46 1 | -48.84 0.99 11
| 0.00 -36.10 0.99 11 |
2704.2 | 0.00 6.67 -0.46 1 | -51.62 0.99 11
| 0.00 -48.50 0.99 11 |
2950.0 | 0.00 7.97 -0.46 1 | -52.82 0.99 11
| 0.00 -61.34 0.99 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 628 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 629
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 366.21
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 223.17 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = -19.53 MX = 1.34 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 291 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 629 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 630
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.68 -0.14 1 | 21.71 0.51 13
| 0.00 -14.82 0.43 21 |
264.6 | 0.00 6.37 0.02 20 | 20.67 0.51 13
| 0.00 -10.38 0.43 21 |
529.2 | 0.00 7.79 0.18 12 | 18.28 0.51 13
| 0.00 -0.98 0.41 22 |
793.8 | 0.00 9.72 0.18 12 | 16.08 0.51 13
| 0.00 -3.40 0.14 2 |
1058.3 | 0.00 10.87 0.18 12 | 12.50 0.51 13
| 0.00 -0.53 0.12 3 |
1322.9 | 0.00 11.93 0.43 11 | 8.79 0.43 21
| 0.00 -0.29 0.12 3 |
1587.5 | 0.00 12.20 0.43 11 | 6.09 0.43 21
| 0.00 -0.11 0.14 2 |
1852.1 | 0.00 10.88 0.43 11 | -11.18 0.18 12
| 0.00 -0.17 -0.12 4 |
2116.7 | 0.00 8.91 0.51 13 | -15.68 0.18 12
| 0.00 -2.08 -0.14 1 |
2381.2 | 0.00 7.22 0.43 21 | -17.87 0.43 11
| 0.00 -3.17 -0.14 1 |
2645.8 | 0.00 6.67 0.43 21 | -20.62 0.43 11
| 0.00 -6.09 0.18 12 |
2910.4 | 0.00 5.74 0.43 21 | -23.61 0.43 11
| 0.00 -12.11 0.18 12 |
3175.0 | 0.00 6.45 0.14 2 | -24.91 0.43 11
| 0.00 -18.56 0.18 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 17.82 MX = 0.51 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 630 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 631
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -19.08 MX = 0.43 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 407 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3300.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.78 0.02 3 | 94.38 0.07 11
| 0.00 -71.45 0.07 11 |
275.0 | 0.00 8.62 0.02 3 | 88.50 0.07 11
| 0.00 -46.23 0.07 11 |
550.0 | 0.00 7.46 0.02 3 | 81.61 0.07 11
| 0.00 -27.20 0.03 15 |
825.0 | 0.00 8.22 0.01 22 | 73.12 0.07 11
| 0.00 -10.66 -0.06 23 |
1100.0 | 0.00 17.30 0.07 11 | 63.41 0.07 11
| 0.00 -5.13 -0.02 4 |
1375.0 | 0.00 33.15 0.07 11 | 41.99 1.77 13
| 0.00 -3.97 -0.02 4 |
1650.0 | 0.00 40.02 0.08 14 | 32.08 1.77 13
| 0.00 -2.81 -0.02 4 |
1925.0 | 0.00 55.12 0.07 11 | 22.34 1.77 13
| 0.00 -0.29 -1.43 1 |
2200.0 | 0.00 61.36 0.07 11 | 15.12 1.77 13
| 0.00 -0.49 -0.02 4 |
2475.0 | 0.00 64.75 0.07 11 | 5.18 2.12 21
| 0.00 -0.36 -1.43 1 |
2750.0 | 0.00 65.80 0.07 11 | 1.68 2.12 21
| 0.00 -0.39 -1.43 1 |
3025.0 | 0.00 64.86 0.07 11 | -5.44 1.77 13
| 0.00 -3.00 0.02 3 |
3300.0 | 0.00 62.28 0.07 11 | -9.36 1.77 13
| 0.00 -4.16 0.02 3 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 421.22 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 228.23 378.06 362.67
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 631 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 632
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 5-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 81.92 MX = 0.07 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 408 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.03 0.05 1 | 52.48 0.35 11
| 0.00 -33.83 0.23 13 |
291.7 | 0.00 2.90 0.18 20 | 45.38 0.35 11
| 0.00 -18.75 0.04 21 |
583.3 | 0.00 6.73 0.18 20 | 37.20 0.35 11
| 0.00 -8.40 0.23 13 |
875.0 | 0.00 10.12 0.34 12 | 30.47 0.23 13
| 0.00 -3.60 -0.05 2 |
1166.7 | 0.00 13.66 0.34 12 | 23.56 0.23 13
| 0.00 -1.79 -0.05 2 |
1458.3 | 0.00 19.01 0.35 11 | 16.65 0.23 13
| 0.00 -0.17 -0.57 4 |
1750.0 | 0.00 21.11 0.35 11 | 9.75 0.23 13
| 0.00 -1.83 0.05 1 |
2041.7 | 0.00 16.40 0.97 14 | -12.05 0.34 12
| 0.00 -3.64 0.05 1 |
2333.3 | 0.00 17.68 0.04 21 | -18.96 0.34 12
| 0.00 -0.27 0.57 3 |
2625.0 | 0.00 18.54 0.23 13 | -25.86 0.34 12
| 0.00 -7.26 0.05 1 |
2916.7 | 0.00 15.85 0.04 21 | -32.60 0.34 12
| 0.00 -11.34 0.18 20 |
3208.3 | 0.00 12.93 0.04 21 | -39.62 0.35 11
| 0.00 -19.70 0.18 20 |
3500.0 | 0.00 12.68 -0.05 2 | -46.73 0.35 11
| 0.00 -30.16 0.34 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 632 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 633
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 193.77 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 38.45 MX = 0.35 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -34.30 MX = 0.34 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 409 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 633 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 634
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 43.77 -8.44 11 | 31.63 -8.44 11
| 0.00 -6.36 -0.31 4 |
158.3 | 0.00 45.45 -6.37 14 | 26.70 -8.44 11
| 0.00 -5.61 -0.31 4 |
316.7 | 0.00 52.25 -8.44 11 | 21.87 -8.44 11
| 0.00 -4.86 -0.31 4 |
475.0 | 0.00 55.27 -8.44 11 | 15.64 -8.44 11
| 0.00 -4.11 -0.31 4 |
633.3 | 0.00 49.98 -6.37 14 | 12.01 -8.44 11
| 0.00 -3.36 -0.31 4 |
791.7 | 0.00 58.73 -8.44 11 | 5.79 -8.44 11
| 0.00 -2.61 -0.31 4 |
950.0 | 0.00 49.61 -6.37 14 | 1.31 -8.44 11
| 0.00 -0.36 0.09 1 |
1108.3 | 0.00 47.46 -6.86 13 | -4.64 -8.44 11
| 0.00 -1.11 -0.31 4 |
1266.7 | 0.00 46.46 -6.86 13 | -10.65 -8.44 11
| 0.00 -0.36 -0.31 4 |
1425.0 | 0.00 55.54 -8.44 11 | -16.73 -8.44 11
| 0.00 -0.39 0.31 3 |
1583.3 | 0.00 52.68 -8.44 11 | -19.35 -8.44 11
| 0.00 -1.14 0.31 3 |
1741.7 | 0.00 48.85 -8.44 11 | -26.28 -8.44 11
| 0.00 -1.89 0.31 3 |
1900.0 | 0.00 44.27 -8.44 11 | -31.31 -8.44 11
| 0.00 -2.64 0.31 3 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 334.46 406.08 349.47 407.78 337.55
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 4-12í 4-12í 4-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 410 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3375.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 634 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 635
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 41.31 3.98 11 | 19.41 3.98 11
| 0.00 -3.92 -0.01 4 |
281.3 | 0.00 36.54 4.00 12 | 12.65 3.98 11
| 0.00 -3.10 -0.01 4 |
562.5 | 0.00 48.28 3.98 11 | 4.49 3.98 11
| 0.00 -0.03 0.68 1 |
843.8 | 0.00 48.48 3.98 11 | -3.46 3.98 11
| 0.00 -1.45 -0.01 4 |
1125.0 | 0.00 46.28 3.98 11 | -11.82 3.98 11
| 0.00 -0.01 -0.14 8 |
1406.3 | 0.00 33.15 3.34 16 | -23.18 3.98 11
| 0.00 -0.14 -0.68 2 |
1687.5 | 0.00 33.66 3.98 11 | -32.74 3.98 11
| 0.00 -0.20 -0.68 2 |
1968.8 | 0.00 23.00 3.98 11 | -42.29 3.98 11
| 0.00 -1.83 0.01 3 |
2250.0 | 0.00 9.45 3.98 11 | -53.65 3.98 11
| 0.00 -2.65 0.01 3 |
2531.3 | 0.00 1.79 1.83 23 | -62.01 3.98 11
| 0.00 -9.58 3.20 14 |
2812.5 | 0.00 4.29 -0.01 4 | -69.97 3.98 11
| 0.00 -25.38 3.98 11 |
3093.8 | 0.00 5.12 -0.01 4 | -78.12 3.98 11
| 0.00 -46.26 3.98 11 |
3375.0 | 0.00 5.94 -0.01 4 | -84.88 3.98 11
| 0.00 -69.18 3.98 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 446.57
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 274.82 318.34 229.18 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -71.91 MX = 3.98 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 635 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 636
============================================================================
B E A M N O. 411 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 29.84 2.97 11 | 24.02 2.97 11
| 0.00 -4.58 0.29 3 |
291.7 | 0.00 27.39 3.01 13 | 17.05 2.97 11
| 0.00 -3.86 0.29 3 |
583.3 | 0.00 39.59 2.97 11 | 8.91 3.01 13
| 0.00 -3.15 0.29 3 |
875.0 | 0.00 40.96 2.97 11 | 2.49 3.01 13
| 0.00 -2.43 0.29 3 |
1166.7 | 0.00 39.62 2.97 11 | -9.45 2.97 11
| 0.00 -1.72 0.29 3 |
1458.3 | 0.00 35.47 2.97 11 | -18.51 2.97 11
| 0.00 -1.00 0.29 3 |
1750.0 | 0.00 23.91 3.01 13 | -30.41 2.97 11
| 0.00 -0.29 0.29 3 |
2041.7 | 0.00 17.74 2.97 11 | -42.30 2.97 11
| 0.00 -1.60 -0.53 1 |
2333.3 | 0.00 5.11 2.10 21 | -51.37 2.97 11
| 0.00 -1.01 0.51 20 |
2625.0 | 0.00 2.48 0.53 2 | -61.65 2.97 11
| 0.00 -12.26 2.97 11 |
2916.7 | 0.00 2.93 0.53 2 | -69.67 2.97 11
| 0.00 -31.37 2.97 11 |
3208.3 | 0.00 3.37 0.53 2 | -77.86 2.97 11
| 0.00 -52.87 2.97 11 |
3500.0 | 0.00 3.81 0.53 2 | -84.84 2.97 11
| 0.00 -76.59 2.97 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 488.42
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 196.33 262.02 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-10í 4-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 636 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 637
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 541.4 mm AWAY FROM END SUPPORT
VY = -71.93 MX = 2.97 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 412 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 44.16 4.22 11 | -71.57 4.22 11
| 0.00 -0.33 1.67 1 |
122.9 | 0.00 31.57 3.91 15 | -75.94 4.22 11
| 0.00 -2.86 -0.44 3 |
245.8 | 0.00 25.69 4.22 11 | -78.28 4.22 11
| 0.00 -3.40 -0.44 3 |
368.8 | 0.00 15.74 4.22 11 | -82.58 4.22 11
| 0.00 -3.94 -0.44 3 |
491.7 | 0.00 9.68 3.91 15 | -86.64 4.22 11
| 0.00 -4.12 1.25 22 |
614.6 | 0.00 5.00 2.56 23 | -89.60 4.22 11
| 0.00 -10.38 2.85 14 |
737.5 | 0.00 5.56 0.44 4 | -93.59 4.22 11
| 0.00 -16.74 4.22 11 |
860.4 | 0.00 6.09 0.44 4 | -97.27 4.22 11
| 0.00 -28.45 4.22 11 |
983.3 | 0.00 6.63 0.44 4 | -100.23 4.22 11
| 0.00 -40.43 2.85 14 |
1106.3 | 0.00 7.17 0.44 4 | -103.38 4.22 11
| 0.00 -53.13 4.22 11 |
1229.2 | 0.00 7.71 0.44 4 | -106.14 4.22 11
| 0.00 -66.00 4.22 11 |
1352.1 | 0.00 8.25 0.44 4 | -108.49 4.22 11
| 0.00 -79.20 4.22 11 |
1475.0 | 0.00 8.79 0.44 4 | -110.72 4.22 11
| 0.00 -92.68 4.22 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 353.15 612.85
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 293.72 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 637 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 638
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 540.0 mm AWAY FROM END SUPPORT
VY = -98.99 MX = 4.22 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 413 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.02 0.39 4 | 103.46 -5.13 11
| 0.00 -95.34 -5.13 11 |
122.9 | 0.00 3.99 0.84 1 | 100.56 -5.13 11
| 0.00 -82.80 -5.13 11 |
245.8 | 0.00 3.74 0.84 1 | 97.39 -5.13 11
| 0.00 -70.63 -5.13 11 |
368.8 | 0.00 8.02 0.39 4 | 94.26 -5.13 11
| 0.00 -58.85 -5.13 11 |
491.7 | 0.00 0.31 0.18 7 | 91.05 -5.13 11
| 0.00 -47.47 -5.13 11 |
614.6 | 0.00 7.35 0.39 4 | 87.26 -5.13 11
| 0.00 -30.04 -4.15 18 |
737.5 | 0.00 7.01 0.39 4 | 83.83 -5.13 11
| 0.00 -29.20 -4.57 14 |
860.4 | 0.00 6.68 0.39 4 | 80.39 -5.13 11
| 0.00 -15.90 -5.13 11 |
983.3 | 0.00 6.51 -1.67 23 | 76.61 -5.13 11
| 0.00 -12.61 -4.57 14 |
1106.3 | 0.00 9.59 -3.64 15 | 73.40 -5.13 11
| 0.00 -4.83 -4.57 14 |
1229.2 | 0.00 16.24 -3.64 15 | 70.26 -5.13 11
| 0.00 -2.23 -2.83 22 |
1352.1 | 0.00 20.23 -5.13 11 | 67.09 -5.13 11
| 0.00 -5.34 -0.39 3 |
1475.0 | 0.00 28.30 -5.13 11 | 64.19 -5.13 11
| 0.00 -5.00 -0.39 3 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 638 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 639
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 634.01 394.26 208.52 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 208.68
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 6-12í 4-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 85.85 MX = -5.13 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 414 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 639 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 640
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.89 0.02 3 | 51.55 -0.50 11
| 0.00 -40.49 -0.50 11 |
250.0 | 0.00 0.57 0.00 9 | 45.56 -0.50 11
| 0.00 -28.57 -0.43 15 |
500.0 | 0.00 3.92 0.02 3 | 38.47 -0.50 11
| 0.00 -17.81 -0.50 11 |
750.0 | 0.00 2.94 0.02 3 | 31.54 -0.50 11
| 0.00 -10.74 -0.43 15 |
1000.0 | 0.00 1.89 -0.25 22 | 24.29 -0.50 11
| 0.00 -3.99 -0.32 23 |
1250.0 | 0.00 2.43 -1.05 13 | 16.45 -0.43 15
| 0.00 -0.14 0.54 1 |
1500.0 | 0.00 4.37 -1.05 13 | 9.89 -0.43 15
| 0.00 -0.06 -0.54 2 |
1750.0 | 0.00 6.06 -0.50 11 | -2.10 -1.09 21
| 0.00 -0.26 -0.54 2 |
2000.0 | 0.00 5.87 -0.43 15 | -10.05 -1.05 13
| 0.00 -0.64 -0.25 22 |
2250.0 | 0.00 4.87 -0.32 23 | -15.85 -1.05 13
| 0.00 -3.99 -0.25 22 |
2500.0 | 0.00 3.46 -0.32 23 | -25.54 -0.50 11
| 0.00 -8.62 -0.37 14 |
2750.0 | 0.00 4.92 -0.02 4 | -32.63 -0.50 11
| 0.00 -15.65 -0.37 14 |
3000.0 | 0.00 5.90 -0.02 4 | -38.62 -0.50 11
| 0.00 -23.96 -0.37 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 235.10 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 37.63 MX = -0.50 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 640 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 641
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -24.41 MX = -0.50 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 415 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.24 0.80 3 | 45.56 6.75 11
| 0.00 -17.03 6.75 11 |
262.5 | 0.00 1.07 0.80 3 | 39.93 6.75 11
| 0.00 -4.90 5.45 17 |
525.0 | 0.00 4.43 4.92 12 | 32.54 6.75 11
| 0.00 -0.13 2.34 23 |
787.5 | 0.00 11.36 6.75 11 | 24.99 6.75 11
| 0.00 -0.73 -0.80 4 |
1050.0 | 0.00 16.88 6.75 11 | 17.09 6.75 11
| 0.00 -0.56 -0.80 4 |
1312.5 | 0.00 20.33 6.75 11 | 9.19 6.75 11
| 0.00 -0.39 -0.80 4 |
1575.0 | 0.00 21.70 6.75 11 | 1.29 6.75 11
| 0.00 -0.22 -0.80 4 |
1837.5 | 0.00 21.01 6.75 11 | -6.60 6.75 11
| 0.00 -0.04 -0.80 4 |
2100.0 | 0.00 14.44 6.36 14 | -14.50 6.75 11
| 0.00 -0.13 0.80 3 |
2362.5 | 0.00 13.41 6.75 11 | -21.96 6.75 11
| 0.00 -0.30 0.80 3 |
2625.0 | 0.00 6.60 6.75 11 | -29.58 6.75 11
| 0.00 -0.47 0.80 3 |
2887.5 | 0.00 0.57 4.14 21 | -35.72 6.75 11
| 0.00 -1.99 6.75 11 |
3150.0 | 0.00 0.81 -0.80 4 | -40.67 6.75 11
| 0.00 -12.04 6.75 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 185.65 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 641 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 642
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 417 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 23.12 2.44 14 | -13.27 2.44 14
| 0.00 -5.59 -0.22 4 |
158.3 | 0.00 20.46 2.72 11 | -16.69 2.44 14
| 0.00 -3.65 -0.22 4 |
316.7 | 0.00 17.78 2.44 14 | -20.63 2.44 14
| 0.00 -1.71 -0.22 4 |
475.0 | 0.00 14.55 3.46 12 | -24.13 2.44 14
| 0.00 -0.23 0.22 3 |
633.3 | 0.00 15.62 2.72 11 | -28.59 2.44 14
| 0.00 -0.20 0.02 9 |
791.7 | 0.00 14.77 1.92 15 | -33.55 2.44 14
| 0.00 -4.10 0.22 3 |
950.0 | 0.00 13.78 1.92 15 | -37.81 2.44 14
| 0.00 -0.71 2.44 14 |
1108.3 | 0.00 12.13 1.92 15 | -41.81 2.44 14
| 0.00 -10.49 1.67 22 |
1266.7 | 0.00 13.58 1.01 23 | -46.01 2.44 14
| 0.00 -13.92 2.44 14 |
1425.0 | 0.00 13.38 1.01 23 | -48.57 2.44 14
| 0.00 -21.40 2.44 14 |
1583.3 | 0.00 12.87 1.01 23 | -51.66 2.44 14
| 0.00 -29.39 2.44 14 |
1741.7 | 0.00 15.72 -0.22 4 | -54.55 2.44 14
| 0.00 -37.83 2.44 14 |
1900.0 | 0.00 17.66 -0.22 4 | -56.83 2.44 14
| 0.00 -46.65 2.44 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 290.96
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 642 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 643
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -45.50 MX = 2.44 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 418 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 64.08 -2.00 11 | -6.38 -2.00 11
| 0.00 -1.73 0.24 1 |
158.3 | 0.00 52.05 -1.89 13 | -10.14 -2.00 11
| 0.00 -1.53 0.24 1 |
316.7 | 0.00 60.84 -2.00 11 | -14.34 -2.00 11
| 0.00 -1.32 0.24 1 |
475.0 | 0.00 47.94 -1.89 13 | -18.47 -2.00 11
| 0.00 -0.14 0.13 4 |
633.3 | 0.00 45.07 -1.89 13 | -22.73 -2.00 11
| 0.00 -0.91 0.24 1 |
791.7 | 0.00 40.92 -1.61 18 | -27.94 -2.00 11
| 0.00 -1.17 0.13 4 |
950.0 | 0.00 37.05 -1.61 17 | -32.59 -2.00 11
| 0.00 -0.49 0.24 1 |
1108.3 | 0.00 32.87 -1.89 13 | -37.23 -2.00 11
| 0.00 -0.21 0.01 10 |
1266.7 | 0.00 34.35 -2.00 11 | -42.44 -2.00 11
| 0.00 -0.08 0.24 1 |
1425.0 | 0.00 27.30 -2.00 11 | -46.70 -2.00 11
| 0.00 -3.24 0.13 4 |
1583.3 | 0.00 20.16 -1.75 14 | -50.84 -2.00 11
| 0.00 -3.75 0.13 4 |
1741.7 | 0.00 14.07 -1.75 14 | -55.03 -2.00 11
| 0.00 -4.27 0.13 4 |
1900.0 | 0.00 8.32 -1.28 22 | -58.79 -2.00 11
| 0.00 -6.04 -0.90 23 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 643 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 644
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.07 178.07 178.07 178.07 178.07
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 396.93 295.59 227.28 177.23 177.23
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 419 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 644 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 645
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 26.47 -3.23 2 | 1309.51 2.27 12
| 0.00 -123.57 2.27 12 |
27.1 | 0.00 0.73 0.56 9 | 1309.34 2.27 12
| 0.00 -83.78 -8.31 15 |
54.2 | 0.00 2.76 -3.23 2 | 1309.24 2.27 12
| 0.00 -61.67 -2.00 11 |
81.3 | 0.00 9.10 3.23 1 | 1309.06 2.27 12
| 0.00 -39.03 -5.47 13 |
108.3 | 0.00 27.72 4.15 20 | 1308.88 2.27 12
| 0.00 -35.16 -5.52 21 |
135.4 | 0.00 58.86 4.15 20 | 1308.79 2.27 12
| 0.00 -39.58 -5.52 21 |
162.5 | 0.00 90.00 4.15 20 | 1308.61 2.27 12
| 0.00 -44.67 -3.23 2 |
189.6 | 0.00 67.77 -8.31 15 | 1308.43 2.27 12
| 0.00 -56.53 -3.23 2 |
216.7 | 0.00 160.03 2.27 12 | 1308.34 2.27 12
| 0.00 -68.39 -3.23 2 |
243.8 | 0.00 195.46 2.27 12 | 1308.16 2.27 12
| 0.00 -80.24 -3.23 2 |
270.8 | 0.00 230.89 2.27 12 | 1307.98 2.27 12
| 0.00 -92.10 -3.23 2 |
297.9 | 0.00 266.31 2.27 12 | 1307.90 2.27 12
| 0.00 -103.96 -3.23 2 |
325.0 | 0.00 301.73 2.27 12 | 1307.71 2.27 12
| 0.00 -115.81 -3.23 2 |
============================================================================
============================================================================
B E A M N O. 421 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 41.50 -0.48 20 | 59.92 -0.21 13
| 0.00 -51.97 -0.03 21 |
264.6 | 0.00 28.82 -0.57 12 | 55.29 -0.21 13
| 0.00 -38.84 -0.03 21 |
529.2 | 0.00 29.46 -0.57 12 | 49.18 -0.21 13
| 0.00 -20.10 0.15 2 |
793.8 | 0.00 14.92 -0.23 15 | 43.77 -0.21 13
| 0.00 -15.29 -0.03 21 |
1058.3 | 0.00 25.59 -0.57 12 | 35.26 -0.21 13
| 0.00 -2.32 -0.13 3 |
1322.9 | 0.00 20.55 -0.57 12 | -30.84 -0.48 20
| 0.00 -1.37 -0.13 3 |
1587.5 | 0.00 19.46 -0.49 11 | -35.83 -0.48 20
| 0.00 -2.01 -0.15 1 |
1852.1 | 0.00 21.45 -0.21 13 | -41.87 -0.57 12
| 0.00 -7.54 -0.15 1 |
2116.7 | 0.00 22.68 -0.21 13 | -48.62 -0.57 12
| 0.00 -15.83 -0.48 20 |
2381.2 | 0.00 27.47 -0.03 21 | -57.11 -0.57 12
| 0.00 -28.31 -0.48 20 |
2645.8 | 0.00 30.55 -0.03 21 | -62.36 -0.57 12
| 0.00 -41.81 -0.48 20 |
2910.4 | 0.00 32.74 -0.03 21 | -67.86 -0.57 12
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 645 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 646
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 300.00 178.50 178.50 178.50 444.10
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 240.82 178.50 178.50 178.50 200.37
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -59.54 MX = -0.57 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 423 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 646 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 647
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.64 -0.16 3 | 41.43 0.37 11
| 0.00 -21.40 0.49 15 |
245.8 | 0.00 4.74 -0.16 3 | 35.55 0.37 11
| 0.00 -12.76 0.49 15 |
491.7 | 0.00 5.49 -0.07 22 | 28.60 0.37 11
| 0.00 -6.05 0.42 23 |
737.5 | 0.00 7.36 -0.07 22 | 21.81 0.49 15
| 0.00 -2.95 0.16 4 |
983.3 | 0.00 10.28 0.10 14 | 16.12 0.49 15
| 0.00 -2.05 0.16 4 |
1229.2 | 0.00 12.26 0.37 11 | 8.60 0.49 15
| 0.00 -1.16 0.16 4 |
1475.0 | 0.00 12.65 0.37 11 | -7.00 -0.07 22
| 0.00 -0.26 0.16 4 |
1720.8 | 0.00 10.91 0.37 11 | -12.98 0.10 14
| 0.00 -0.63 -0.16 3 |
1966.7 | 0.00 7.07 0.37 11 | -20.16 0.37 11
| 0.00 -1.53 -0.16 3 |
2212.5 | 0.00 4.31 0.42 23 | -27.27 0.37 11
| 0.00 -2.96 -0.07 22 |
2458.3 | 0.00 3.32 0.16 4 | -34.07 0.37 11
| 0.00 -9.02 0.10 14 |
2704.2 | 0.00 4.21 0.16 4 | -41.02 0.37 11
| 0.00 -17.51 0.10 14 |
2950.0 | 0.00 5.11 0.16 4 | -46.90 0.37 11
| 0.00 -27.23 0.10 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 27.50 MX = 0.37 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 647 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 648
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -32.70 MX = 0.37 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 424 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 275.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.21 18.88 20 | 1337.40 28.75 13
| 0.00 -93.36 28.75 13 |
22.9 | 0.00 0.05 18.88 20 | 1337.27 28.75 13
| 0.00 -62.71 28.75 13 |
45.8 | 0.00 0.52 0.74 10 | 1337.19 28.75 13
| 0.00 -35.83 35.92 11 |
68.8 | 0.00 8.53 18.91 21 | 1337.06 28.75 13
| 0.00 -19.18 35.92 11 |
91.7 | 0.00 29.22 28.75 13 | 1336.94 28.75 13
| 0.00 -33.26 28.73 12 |
114.6 | 0.00 59.86 28.75 13 | 1336.87 28.75 13
| 0.00 -52.60 18.88 20 |
137.5 | 0.00 90.49 28.75 13 | 1336.76 28.75 13
| 0.00 -41.25 28.73 12 |
160.4 | 0.00 129.03 18.91 21 | 1336.66 28.75 13
| 0.00 -78.94 18.88 20 |
183.3 | 0.00 151.75 28.75 13 | 1336.58 28.75 13
| 0.00 -83.76 -0.01 1 |
206.2 | 0.00 182.38 28.75 13 | 1336.49 28.75 13
| 0.00 -105.28 18.88 20 |
229.2 | 0.00 213.01 28.75 13 | 1336.40 28.75 13
| 0.00 -118.46 18.88 20 |
252.1 | 0.00 243.64 28.75 13 | 1336.33 28.75 13
| 0.00 -131.63 18.88 20 |
275.0 | 0.00 274.26 28.75 13 | 1336.25 28.75 13
| 0.00 -144.81 18.88 20 |
============================================================================
============================================================================
B E A M N O. 425 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 648 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 649
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 16.22 -0.32 3 | 600.94 9.15 11
| 0.00 -102.36 9.15 11 |
37.5 | 0.00 17.03 -0.32 3 | 600.57 9.15 11
| 0.00 -84.30 7.70 15 |
75.0 | 0.00 17.84 -0.32 3 | 600.41 9.15 11
| 0.00 -67.26 7.70 15 |
112.5 | 0.00 18.65 -0.32 3 | 600.03 9.15 11
| 0.00 -50.22 7.70 15 |
150.0 | 0.00 13.50 6.94 14 | 599.65 9.15 11
| 0.00 -35.21 4.61 23 |
187.5 | 0.00 32.45 6.94 14 | 599.50 9.15 11
| 0.00 -16.17 7.70 15 |
225.0 | 0.00 48.38 3.66 22 | 599.13 9.15 11
| 0.00 -14.83 4.61 23 |
262.5 | 0.00 70.34 6.94 14 | 598.75 9.15 11
| 0.00 -21.88 0.32 4 |
300.0 | 0.00 89.27 6.94 14 | 598.60 9.15 11
| 0.00 -22.68 0.32 4 |
337.5 | 0.00 108.19 6.94 14 | 598.22 9.15 11
| 0.00 -23.49 0.32 4 |
375.0 | 0.00 127.10 6.94 14 | 597.85 9.15 11
| 0.00 -24.30 0.32 4 |
412.5 | 0.00 144.84 9.15 11 | 597.70 9.15 11
| 0.00 -25.11 0.32 4 |
450.0 | 0.00 167.25 9.15 11 | 597.32 9.15 11
| 0.00 -25.92 0.32 4 |
============================================================================
============================================================================
B E A M N O. 426 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.01 0.06 3 | 42.10 -1.02 15
| 0.00 -22.64 -1.02 15 |
250.0 | 0.00 6.92 0.06 3 | 37.24 -1.02 15
| 0.00 -12.65 -1.02 15 |
500.0 | 0.00 7.65 -0.88 14 | 32.51 -1.02 15
| 0.00 -4.82 -0.06 4 |
750.0 | 0.00 9.86 -0.88 14 | 24.94 -1.02 15
| 0.00 -2.73 -0.06 4 |
1000.0 | 0.00 11.98 -1.19 11 | 18.79 -1.02 15
| 0.00 -0.64 -0.06 4 |
1250.0 | 0.00 12.42 -1.02 15 | 10.27 -1.02 15
| 0.00 -1.46 0.06 3 |
1500.0 | 0.00 10.54 -0.90 12 | -17.57 -0.88 14
| 0.00 -0.07 -0.02 8 |
1750.0 | 0.00 11.59 -0.70 23 | -27.16 -0.88 14
| 0.00 -5.65 0.06 3 |
2000.0 | 0.00 11.70 -0.70 23 | -34.01 -0.88 14
| 0.00 -11.52 -0.52 22 |
2250.0 | 0.00 10.79 -0.70 23 | -40.85 -1.19 11
| 0.00 -18.72 -0.52 22 |
2500.0 | 0.00 11.93 -0.06 4 | -47.34 -1.19 11
| 0.00 -29.01 -0.88 14 |
2750.0 | 0.00 14.02 -0.06 4 | -53.90 -1.19 11
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 649 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 650
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 329.26
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -43.01 MX = -1.19 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 427 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3350.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 650 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 651
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.52 -0.14 3 | 50.27 -1.38 11
| 0.00 -29.13 -0.94 15 |
279.2 | 0.00 0.70 -0.93 22 | 43.59 -1.38 11
| 0.00 -17.06 -0.94 15 |
558.3 | 0.00 4.50 -0.93 22 | 35.67 -1.38 11
| 0.00 -6.61 -0.94 15 |
837.5 | 0.00 8.20 -1.27 14 | 27.92 -1.38 11
| 0.00 -2.55 0.14 4 |
1116.7 | 0.00 12.91 -1.38 11 | 15.19 -1.85 12
| 0.00 -1.23 0.14 4 |
1395.8 | 0.00 16.76 -1.38 11 | 8.14 -1.85 12
| 0.00 -0.05 -0.62 1 |
1675.0 | 0.00 17.83 -1.38 11 | -6.77 -1.27 14
| 0.00 -0.17 -0.01 9 |
1954.2 | 0.00 16.00 -1.38 11 | -15.10 -1.27 14
| 0.00 -2.74 -0.14 3 |
2233.3 | 0.00 13.99 -0.94 15 | -22.14 -1.27 14
| 0.00 -0.57 0.62 2 |
2512.5 | 0.00 9.78 -0.94 15 | -30.63 -1.38 11
| 0.00 -5.81 -0.93 22 |
2791.7 | 0.00 7.41 -0.52 23 | -38.37 -1.38 11
| 0.00 -12.43 -1.27 14 |
3070.8 | 0.00 8.03 0.14 4 | -46.30 -1.38 11
| 0.00 -23.48 -1.27 14 |
3350.0 | 0.00 9.35 0.14 4 | -52.98 -1.38 11
| 0.00 -36.15 -1.27 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 217.51
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 36.18 MX = -1.38 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 651 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 652
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -35.35 MX = -1.38 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 428 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 19.91 -0.56 1 | 1116.13 13.33 13
| 0.00 -84.61 13.33 13 |
18.8 | 0.00 7.90 6.93 22 | 1116.03 13.33 13
| 0.00 -74.65 13.62 15 |
37.5 | 0.00 24.30 6.93 22 | 1115.97 13.33 13
| 0.00 -61.93 9.32 23 |
56.3 | 0.00 40.71 6.93 22 | 1115.87 13.33 13
| 0.00 -59.49 9.32 23 |
75.0 | 0.00 57.11 6.93 22 | 1115.78 13.33 13
| 0.00 -38.06 0.80 4 |
93.8 | 0.00 42.71 -0.80 3 | 1115.72 13.33 13
| 0.00 -54.63 9.32 23 |
112.5 | 0.00 89.91 6.93 22 | 1115.63 13.33 13
| 0.00 -52.19 9.32 23 |
131.3 | 0.00 61.85 13.33 13 | 1115.55 13.33 13
| 0.00 -49.76 9.32 23 |
150.0 | 0.00 122.70 6.93 22 | 1115.50 13.33 13
| 0.00 -47.33 9.32 23 |
168.8 | 0.00 147.54 11.71 14 | 1115.42 13.33 13
| 0.00 -61.33 0.80 4 |
187.5 | 0.00 168.08 11.71 14 | 1115.35 13.33 13
| 0.00 -65.99 0.80 4 |
206.3 | 0.00 188.62 11.71 14 | 1115.29 13.33 13
| 0.00 -70.65 0.80 4 |
225.0 | 0.00 209.16 11.71 14 | 1115.23 13.33 13
| 0.00 -75.30 0.80 4 |
============================================================================
============================================================================
B E A M N O. 429 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 652 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 653
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 13.02 0.08 4 | 48.38 -0.32 11
| 0.00 -37.77 -0.36 14 |
268.8 | 0.00 10.91 0.08 4 | 44.11 -0.36 14
| 0.00 -25.39 -0.36 14 |
537.5 | 0.00 8.81 0.08 4 | 38.08 -0.36 14
| 0.00 -14.32 -0.36 14 |
806.2 | 0.00 11.96 -0.06 23 | 32.48 -0.36 14
| 0.00 -6.70 -0.08 3 |
1075.0 | 0.00 13.82 -0.16 15 | 24.87 -0.36 14
| 0.00 -2.30 -0.30 22 |
1343.8 | 0.00 14.11 -0.32 11 | 16.06 -0.36 14
| 0.00 -2.49 -0.08 3 |
1612.5 | 0.00 11.64 -0.29 16 | -13.59 -0.06 23
| 0.00 -1.26 -0.08 1 |
1881.3 | 0.00 12.68 -0.16 13 | -20.36 -0.16 15
| 0.00 -2.41 -0.08 1 |
2150.0 | 0.00 10.02 -0.36 14 | -30.84 -0.16 15
| 0.00 -3.83 0.08 4 |
2418.8 | 0.00 7.94 -0.30 22 | -36.99 -0.16 15
| 0.00 -9.86 -0.06 23 |
2687.5 | 0.00 8.04 -0.08 3 | -42.58 -0.16 15
| 0.00 -18.94 -0.16 15 |
2956.2 | 0.00 10.14 -0.08 3 | -48.80 -0.32 11
| 0.00 -31.24 -0.16 15 |
3225.0 | 0.00 12.25 -0.08 3 | -53.62 -0.32 11
| 0.00 -44.78 -0.16 15 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 217.62 178.50 178.50 178.50 257.26
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 36.49 MX = -0.36 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 653 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 654
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -42.52 MX = -0.16 LD= 15
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 430 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3300.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.46 0.57 2 | 109.11 -0.87 11
| 0.00 -110.56 -0.87 11 |
275.0 | 0.00 0.54 0.57 2 | 103.23 -0.87 11
| 0.00 -81.29 -0.87 11 |
550.0 | 0.00 0.61 0.57 2 | 96.35 -0.87 11
| 0.00 -53.82 -0.87 11 |
825.0 | 0.00 1.00 0.11 3 | 87.86 -0.87 11
| 0.00 -23.59 -1.38 12 |
1100.0 | 0.00 0.75 0.57 2 | 78.15 -0.87 11
| 0.00 -5.60 -0.87 11 |
1375.0 | 0.00 14.30 -0.87 11 | 67.05 -0.87 11
| 0.00 -0.82 -0.57 1 |
1650.0 | 0.00 31.01 -0.87 11 | 54.66 -0.87 11
| 0.00 -0.89 -0.11 4 |
1925.0 | 0.00 36.52 -0.56 14 | 42.49 -0.87 11
| 0.00 -0.97 -0.57 1 |
2200.0 | 0.00 54.66 -0.87 11 | 33.47 -0.87 11
| 0.00 -0.06 -0.01 10 |
2475.0 | 0.00 62.11 -0.87 11 | 22.04 -0.87 11
| 0.00 -1.11 -0.57 1 |
2750.0 | 0.00 67.21 -0.87 11 | 15.07 -0.87 11
| 0.00 -1.18 -0.57 1 |
3025.0 | 0.00 70.32 -0.87 11 | 5.90 -1.38 12
| 0.00 -1.26 -0.57 1 |
3300.0 | 0.00 71.78 -0.87 11 | 1.98 -1.38 12
| 0.00 -1.33 -0.57 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 707.13 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 183.49 370.80 431.74
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 654 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 655
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 10-10í 3-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 535.0 mm AWAY FROM START SUPPORT
VY = 96.66 MX = -0.87 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 431 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.54 -0.02 1 | 50.72 0.11 11
| 0.00 -24.10 0.11 11 |
291.7 | 0.00 1.09 -0.67 3 | 43.61 0.11 11
| 0.00 -9.58 0.90 15 |
583.3 | 0.00 2.23 -0.71 14 | 35.43 0.11 11
| 0.00 -1.04 0.67 4 |
875.0 | 0.00 9.47 -0.71 14 | 27.02 0.11 11
| 0.00 -0.99 0.67 4 |
1166.7 | 0.00 16.98 0.11 11 | 14.92 0.90 15
| 0.00 -0.94 0.67 4 |
1458.3 | 0.00 21.08 0.11 11 | 8.01 0.90 15
| 0.00 -0.88 0.67 4 |
1750.0 | 0.00 22.66 0.11 11 | 1.02 0.98 23
| 0.00 -0.83 0.67 4 |
2041.7 | 0.00 21.73 0.11 11 | -5.80 0.90 15
| 0.00 -2.03 -0.02 1 |
2333.3 | 0.00 18.27 0.11 11 | -12.71 0.90 15
| 0.00 -2.68 -0.02 1 |
2625.0 | 0.00 13.84 0.11 13 | -24.79 0.11 11
| 0.00 -3.33 -0.02 1 |
2916.7 | 0.00 8.08 0.00 21 | -33.21 0.11 11
| 0.00 -3.98 -0.02 1 |
3208.3 | 0.00 4.63 0.02 2 | -41.39 0.11 11
| 0.00 -11.24 0.07 12 |
3500.0 | 0.00 5.29 0.02 2 | -48.49 0.11 11
| 0.00 -22.51 0.07 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 655 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 656
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 36.68 MX = 0.11 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -35.33 MX = 0.11 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 432 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 656 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 657
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 42.77 -8.06 11 | 33.68 -8.06 11
| 0.00 -0.95 0.15 1 |
158.3 | 0.00 39.26 -6.63 13 | 28.74 -8.06 11
| 0.00 -0.81 0.09 4 |
316.7 | 0.00 51.90 -8.06 11 | 23.91 -8.06 11
| 0.00 -0.85 0.15 1 |
475.0 | 0.00 55.24 -8.06 11 | 17.68 -8.06 11
| 0.00 -0.81 0.15 1 |
633.3 | 0.00 57.74 -8.06 11 | 14.06 -8.06 11
| 0.00 -0.48 0.09 4 |
791.7 | 0.00 59.35 -8.06 11 | 7.83 -8.06 11
| 0.00 -0.71 0.15 1 |
950.0 | 0.00 60.16 -8.06 11 | 3.35 -8.06 11
| 0.00 -0.67 0.15 1 |
1108.3 | 0.00 48.23 -6.55 14 | -2.60 -8.06 11
| 0.00 -0.62 0.15 1 |
1266.7 | 0.00 59.17 -8.06 11 | -8.61 -8.06 11
| 0.00 -0.57 0.15 1 |
1425.0 | 0.00 57.45 -8.06 11 | -14.68 -8.06 11
| 0.00 -0.52 0.15 1 |
1583.3 | 0.00 54.92 -8.06 11 | -17.31 -8.06 11
| 0.00 -0.48 0.15 1 |
1741.7 | 0.00 51.41 -8.06 11 | -24.24 -8.06 11
| 0.00 -0.43 0.15 1 |
1900.0 | 0.00 47.16 -8.06 11 | -29.27 -8.06 11
| 0.00 -0.38 0.15 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 324.48 401.94 433.10 415.90 351.46
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 4-12í 4-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 433 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3375.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 657 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 658
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 41.88 4.29 11 | 23.95 4.29 11
| 0.00 -4.64 0.17 4 |
281.3 | 0.00 47.66 4.29 11 | 17.19 4.29 11
| 0.00 -3.41 0.17 4 |
562.5 | 0.00 51.41 4.29 11 | 8.40 4.63 12
| 0.00 -2.17 0.17 4 |
843.8 | 0.00 42.09 4.63 12 | 2.03 4.63 12
| 0.00 -0.19 1.00 1 |
1125.0 | 0.00 51.96 4.29 11 | -7.28 4.29 11
| 0.00 -0.09 -1.00 2 |
1406.3 | 0.00 48.37 4.29 11 | -18.64 4.29 11
| 0.00 -0.36 -1.00 2 |
1687.5 | 0.00 41.90 4.29 11 | -28.19 4.29 11
| 0.00 -2.79 -0.17 3 |
1968.8 | 0.00 32.51 4.29 11 | -37.75 4.29 11
| 0.00 -4.03 -0.17 3 |
2250.0 | 0.00 20.24 4.29 11 | -49.11 4.29 11
| 0.00 -5.27 -0.17 3 |
2531.3 | 0.00 12.05 3.64 15 | -57.47 4.29 11
| 0.00 -6.85 1.68 22 |
2812.5 | 0.00 5.67 2.20 23 | -65.42 4.29 11
| 0.00 -18.91 3.22 14 |
3093.8 | 0.00 8.98 0.17 4 | -73.58 4.29 11
| 0.00 -36.08 3.22 14 |
3375.0 | 0.00 10.22 0.17 4 | -80.34 4.29 11
| 0.00 -53.28 4.29 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 350.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 280.61 285.21 280.74 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 4-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -67.37 MX = 4.29 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 658 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 659
============================================================================
B E A M N O. 434 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 30.99 2.02 11 | 30.75 2.02 11
| 0.00 -1.29 0.42 2 |
291.7 | 0.00 38.94 2.02 11 | 23.78 2.02 11
| 0.00 -1.03 0.42 2 |
583.3 | 0.00 44.66 2.02 11 | 15.58 2.02 11
| 0.00 -0.76 0.42 2 |
875.0 | 0.00 48.00 2.02 11 | 7.15 2.12 13
| 0.00 -0.30 -0.10 4 |
1166.7 | 0.00 48.62 2.02 11 | -2.72 2.02 11
| 0.00 -0.25 -0.10 4 |
1458.3 | 0.00 46.44 2.02 11 | -11.79 2.02 11
| 0.00 -0.19 -0.10 4 |
1750.0 | 0.00 41.08 2.02 11 | -23.68 2.02 11
| 0.00 -0.31 -0.42 1 |
2041.7 | 0.00 32.62 2.02 11 | -35.57 2.02 11
| 0.00 -0.58 -0.42 1 |
2333.3 | 0.00 20.99 2.02 11 | -44.64 2.02 11
| 0.00 -0.85 -0.42 1 |
2625.0 | 0.00 6.59 2.12 13 | -54.92 2.02 11
| 0.00 -1.12 -0.42 1 |
2916.7 | 0.00 1.38 0.42 2 | -62.94 2.02 11
| 0.00 -10.59 2.02 11 |
3208.3 | 0.00 1.65 0.42 2 | -71.14 2.02 11
| 0.00 -30.13 2.02 11 |
3500.0 | 0.00 1.92 0.42 2 | -78.11 2.02 11
| 0.00 -51.89 2.02 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 319.40
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 193.92 294.92 253.43 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 4-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 659 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 660
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -65.20 MX = 2.02 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 435 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 48.89 2.77 11 | -67.38 2.77 11
| 0.00 -0.63 2.06 1 |
122.9 | 0.00 31.44 4.69 12 | -71.75 2.77 11
| 0.00 -0.02 -0.04 9 |
245.8 | 0.00 31.45 2.77 11 | -74.10 2.77 11
| 0.00 -0.26 -0.45 3 |
368.8 | 0.00 22.01 2.77 11 | -78.39 2.77 11
| 0.00 -0.30 -0.45 3 |
491.7 | 0.00 12.17 2.77 11 | -82.46 2.77 11
| 0.00 -1.07 2.06 1 |
614.6 | 0.00 0.08 4.69 12 | -85.41 2.77 11
| 0.00 -1.08 4.37 20 |
737.5 | 0.00 1.29 -2.06 2 | -89.40 2.77 11
| 0.00 -8.68 4.69 12 |
860.4 | 0.00 1.40 -2.06 2 | -93.09 2.77 11
| 0.00 -20.12 2.77 11 |
983.3 | 0.00 1.51 -2.06 2 | -96.04 2.77 11
| 0.00 -31.75 2.77 11 |
1106.3 | 0.00 1.62 -2.06 2 | -99.19 2.77 11
| 0.00 -43.77 2.77 11 |
1229.2 | 0.00 1.73 -2.06 2 | -101.96 2.77 11
| 0.00 -56.13 2.77 11 |
1352.1 | 0.00 1.84 -2.06 2 | -104.30 2.77 11
| 0.00 -68.81 2.77 11 |
1475.0 | 0.00 1.95 -2.06 2 | -106.53 2.77 11
| 0.00 -81.78 2.77 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 276.91 520.44
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 307.84 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 660 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 661
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 4-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 541.4 mm AWAY FROM END SUPPORT
VY = -94.81 MX = 2.77 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 436 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.71 0.89 1 | 107.50 -3.35 11
| 0.00 -97.94 -3.35 11 |
122.9 | 0.00 2.56 0.89 1 | 104.59 -3.35 11
| 0.00 -84.91 -3.35 11 |
245.8 | 0.00 2.42 0.89 1 | 101.42 -3.35 11
| 0.00 -60.70 -3.74 13 |
368.8 | 0.00 0.18 0.13 7 | 98.29 -3.35 11
| 0.00 -59.96 -3.35 11 |
491.7 | 0.00 0.17 0.13 7 | 95.08 -3.35 11
| 0.00 -39.36 -2.62 15 |
614.6 | 0.00 1.99 0.89 1 | 91.30 -3.35 11
| 0.00 -36.63 -3.35 11 |
737.5 | 0.00 1.85 0.89 1 | 87.86 -3.35 11
| 0.00 -22.70 -3.74 13 |
860.4 | 0.00 0.64 -0.05 3 | 84.42 -3.35 11
| 0.00 -12.79 -2.62 15 |
983.3 | 0.00 1.56 0.89 1 | 80.64 -3.35 11
| 0.00 -4.89 -3.35 11 |
1106.3 | 0.00 4.83 -3.35 11 | 77.43 -3.35 11
| 0.00 -1.42 -0.89 2 |
1229.2 | 0.00 14.15 -3.35 11 | 74.30 -3.35 11
| 0.00 -1.28 -0.89 2 |
1352.1 | 0.00 23.09 -3.35 11 | 71.13 -3.35 11
| 0.00 -1.13 -0.89 2 |
1475.0 | 0.00 31.65 -3.35 11 | 68.23 -3.35 11
| 0.00 -0.99 -0.89 2 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 661 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 662
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 631.76 382.89 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 211.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 6-12í 4-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 89.89 MX = -3.35 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 438 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 662 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 663
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.75 -0.42 1 | 45.36 6.82 11
| 0.00 -15.99 6.82 11 |
262.5 | 0.00 0.24 -0.16 4 | 39.74 6.82 11
| 0.00 -4.80 6.82 11 |
525.0 | 0.00 5.30 4.95 12 | 32.35 6.82 11
| 0.00 -0.19 4.18 21 |
787.5 | 0.00 12.25 6.82 11 | 24.79 6.82 11
| 0.00 -1.04 0.42 2 |
1050.0 | 0.00 17.72 6.82 11 | 16.89 6.82 11
| 0.00 -0.12 0.16 3 |
1312.5 | 0.00 21.11 6.82 11 | 8.99 6.82 11
| 0.00 -0.57 0.42 2 |
1575.0 | 0.00 22.44 6.82 11 | 1.10 6.82 11
| 0.00 -0.05 0.16 3 |
1837.5 | 0.00 17.23 5.96 13 | -6.80 6.82 11
| 0.00 -0.10 0.42 2 |
2100.0 | 0.00 18.87 6.82 11 | -14.70 6.82 11
| 0.00 -0.14 -0.42 1 |
2362.5 | 0.00 13.99 6.82 11 | -22.16 6.82 11
| 0.00 -0.37 -0.42 1 |
2625.0 | 0.00 7.13 6.82 11 | -29.78 6.82 11
| 0.00 -0.61 -0.42 1 |
2887.5 | 0.00 0.36 4.18 21 | -35.92 6.82 11
| 0.00 -1.51 6.82 11 |
3150.0 | 0.00 1.08 0.42 2 | -40.86 6.82 11
| 0.00 -11.61 6.82 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 190.62 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 440 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 663 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 664
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 24.18 2.58 11 | -1.39 2.96 12
| 0.00 -0.49 0.75 1 |
158.3 | 0.00 23.24 2.58 11 | -8.06 2.58 11
| 0.00 -0.61 0.21 4 |
316.7 | 0.00 17.18 2.96 12 | -12.98 2.58 11
| 0.00 -0.06 0.75 1 |
475.0 | 0.00 19.12 2.58 11 | -17.36 2.58 11
| 0.00 -0.02 -0.07 8 |
633.3 | 0.00 15.77 2.58 11 | -22.93 2.58 11
| 0.00 -0.23 -0.21 3 |
791.7 | 0.00 11.59 2.58 11 | -29.13 2.58 11
| 0.00 -0.06 -0.07 8 |
950.0 | 0.00 6.22 2.96 12 | -34.45 2.58 11
| 0.00 -0.80 -0.75 2 |
1108.3 | 0.00 1.81 2.96 12 | -39.45 2.58 11
| 0.00 -0.71 1.81 14 |
1266.7 | 0.00 1.24 0.75 1 | -44.71 2.58 11
| 0.00 -5.89 2.58 11 |
1425.0 | 0.00 1.45 0.75 1 | -47.91 2.58 11
| 0.00 -13.21 2.58 11 |
1583.3 | 0.00 1.67 0.75 1 | -51.77 2.58 11
| 0.00 -21.17 2.58 11 |
1741.7 | 0.00 1.88 0.75 1 | -55.37 2.58 11
| 0.00 -29.69 2.58 11 |
1900.0 | 0.00 2.10 0.75 1 | -58.22 2.58 11
| 0.00 -38.69 2.58 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 244.67
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -44.07 MX = 2.58 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 664 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 665
============================================================================
B E A M N O. 441 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 63.70 -1.43 11 | -4.88 -1.41 13
| 0.00 -0.75 0.22 1 |
158.3 | 0.00 62.68 -1.43 11 | -8.30 -1.43 11
| 0.00 -0.58 0.22 1 |
316.7 | 0.00 49.34 -1.41 13 | -12.49 -1.43 11
| 0.00 -0.42 0.22 1 |
475.0 | 0.00 58.75 -1.43 11 | -16.63 -1.43 11
| 0.00 -0.26 0.22 1 |
633.3 | 0.00 44.73 -1.41 13 | -20.89 -1.43 11
| 0.00 -0.09 0.22 1 |
791.7 | 0.00 41.56 -1.41 13 | -26.10 -1.43 11
| 0.00 -0.07 -0.22 2 |
950.0 | 0.00 47.58 -1.43 11 | -30.74 -1.43 11
| 0.00 -0.24 -0.22 2 |
1108.3 | 0.00 42.32 -1.43 11 | -35.39 -1.43 11
| 0.00 -0.40 -0.22 2 |
1266.7 | 0.00 36.30 -1.43 11 | -40.60 -1.43 11
| 0.00 -0.56 -0.22 2 |
1425.0 | 0.00 29.54 -1.43 11 | -44.86 -1.43 11
| 0.00 -0.73 -0.22 2 |
1583.3 | 0.00 22.10 -1.43 11 | -48.99 -1.43 11
| 0.00 -0.89 -0.22 2 |
1741.7 | 0.00 14.00 -1.43 11 | -53.19 -1.43 11
| 0.00 -1.06 -0.22 2 |
1900.0 | 0.00 5.28 -1.43 11 | -56.95 -1.43 11
| 0.00 -1.22 -0.22 2 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 385.44 354.71 286.57 179.86 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 5-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 665 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 666
============================================================================
B E A M N O. 442 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.00 -8.77 21 | 300.60 -0.46 12
| 0.00 -47.92 -0.46 12 |
27.1 | 0.00 7.11 -8.77 21 | 300.43 -0.46 12
| 0.00 -39.78 -0.46 12 |
54.2 | 0.00 10.41 -3.76 2 | 300.34 -0.46 12
| 0.00 -23.94 -6.21 11 |
81.3 | 0.00 6.85 -3.76 2 | 300.18 -0.46 12
| 0.00 -19.12 -6.21 11 |
108.3 | 0.00 0.32 -1.77 3 | 287.01 2.50 20
| 0.00 -7.48 -9.48 13 |
135.4 | 0.00 0.03 -0.34 8 | 286.95 2.50 20
| 0.00 -8.26 -7.09 14 |
162.5 | 0.00 1.46 1.77 4 | 286.86 2.50 20
| 0.00 -8.31 -9.48 13 |
189.6 | 0.00 11.84 2.50 20 | 286.78 2.50 20
| 0.00 -10.30 -8.77 21 |
216.7 | 0.00 19.61 2.50 20 | 286.71 2.50 20
| 0.00 -13.21 -8.77 21 |
243.8 | 0.00 27.37 2.50 20 | 286.64 2.50 20
| 0.00 -16.12 -8.77 21 |
270.8 | 0.00 35.13 2.50 20 | 286.57 2.50 20
| 0.00 -19.03 -8.77 21 |
297.9 | 0.00 42.90 2.50 20 | 286.50 2.50 20
| 0.00 -21.94 -8.77 21 |
325.0 | 0.00 50.65 2.50 20 | 286.43 2.50 20
| 0.00 -24.86 -8.77 21 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 279.01 178.50 178.50 178.50 223.21
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 316.66
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 12í 2 legged 12í 2 legged 12í 2 legged 12í 2 legged 12í
REINF. @ 70 mm c/c @ 155 mm c/c @ 110 mm c/c @ 110 mm c/c @ 110 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 666 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 667
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = -127.80 MX = 2.50 LD= 20
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 444 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 24.10 -0.71 20 | 44.97 -1.16 13
| 0.00 -44.21 -0.76 21 |
264.6 | 0.00 23.57 -0.71 20 | 41.34 -1.16 13
| 0.00 -34.17 -0.76 21 |
529.2 | 0.00 17.73 -1.11 12 | 36.85 -1.16 13
| 0.00 -24.88 -0.76 21 |
793.8 | 0.00 18.44 -1.11 12 | 32.48 -1.16 13
| 0.00 -16.40 -0.76 21 |
1058.3 | 0.00 17.27 -0.71 20 | 26.52 -1.16 13
| 0.00 -8.68 -0.02 2 |
1322.9 | 0.00 15.72 -1.11 12 | 21.42 -1.16 13
| 0.00 -1.26 -0.62 3 |
1587.5 | 0.00 12.58 -1.42 11 | 19.88 -0.76 21
| 0.00 -0.30 -0.62 3 |
1852.1 | 0.00 11.19 -1.42 11 | -23.61 -1.11 12
| 0.00 -1.89 0.02 1 |
2116.7 | 0.00 12.27 -0.76 21 | -28.71 -1.11 12
| 0.00 -5.41 0.02 1 |
2381.2 | 0.00 15.16 -0.76 21 | -34.67 -1.11 12
| 0.00 -11.64 -0.71 20 |
2645.8 | 0.00 17.19 -0.76 21 | -39.04 -1.11 12
| 0.00 -20.17 -0.71 20 |
2910.4 | 0.00 18.42 -0.76 21 | -43.53 -1.11 12
| 0.00 -29.32 -1.11 12 |
3175.0 | 0.00 18.90 -0.76 21 | -47.16 -1.11 12
| 0.00 -41.32 -1.11 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 259.76 178.50 178.50 178.50 245.96
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 667 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 668
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -36.73 MX = -1.11 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 446 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 10.61 -0.07 3 | 40.13 -0.20 11
| 0.00 -22.99 -0.08 15 |
245.8 | 0.00 12.31 -0.17 22 | 34.24 -0.20 11
| 0.00 -15.28 0.03 23 |
491.7 | 0.00 14.12 -0.17 22 | 28.74 -0.08 15
| 0.00 -6.20 -0.08 15 |
737.5 | 0.00 15.51 -0.24 14 | 23.30 -0.08 15
| 0.00 -6.37 0.07 4 |
983.3 | 0.00 17.12 -0.24 14 | 17.61 -0.08 15
| 0.00 -4.95 0.07 4 |
1229.2 | 0.00 16.14 -0.20 11 | 10.09 -0.08 15
| 0.00 -3.54 0.07 4 |
1475.0 | 0.00 15.51 -0.24 14 | -11.04 -0.17 22
| 0.00 -2.12 0.07 4 |
1720.8 | 0.00 11.68 -0.62 13 | -16.56 -0.24 14
| 0.00 -0.30 0.38 1 |
1966.7 | 0.00 9.99 -0.20 11 | -24.08 -0.24 14
| 0.00 -0.71 -0.07 3 |
2212.5 | 0.00 5.65 -0.08 15 | -29.76 -0.24 14
| 0.00 -2.12 -0.07 3 |
2458.3 | 0.00 3.53 0.07 4 | -35.20 -0.24 14
| 0.00 -7.60 -0.17 22 |
2704.2 | 0.00 4.95 0.07 4 | -42.32 -0.20 11
| 0.00 -16.83 -0.24 14 |
2950.0 | 0.00 6.36 0.07 4 | -48.21 -0.20 11
| 0.00 -27.42 -0.24 14 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 668 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 669
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 27.87 MX = -0.08 LD= 15
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -34.11 MX = -0.24 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 447 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 275.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 669 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 670
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 4.55 36.05 12 | 204.58 33.74 13
| 0.00 -37.39 33.74 13 |
22.9 | 0.00 12.03 24.34 20 | 204.44 33.74 13
| 0.00 -19.90 43.61 11 |
45.8 | 0.00 7.11 24.34 20 | 204.37 33.74 13
| 0.00 -28.02 33.74 13 |
68.8 | 0.00 2.20 24.34 20 | 204.24 33.74 13
| 0.00 -18.64 43.61 11 |
91.7 | 0.00 3.54 0.96 1 | 204.12 33.74 13
| 0.00 -18.02 43.61 11 |
114.6 | 0.00 0.59 0.41 3 | 204.05 33.74 13
| 0.00 -17.40 43.61 11 |
137.5 | 0.00 1.78 0.41 3 | 203.94 33.74 13
| 0.00 -13.72 35.00 16 |
160.4 | 0.00 3.28 21.45 21 | 203.83 33.74 13
| 0.00 -16.17 43.61 11 |
183.3 | 0.00 0.04 33.74 13 | 203.76 33.74 13
| 0.00 -17.46 34.40 15 |
206.2 | 0.00 4.70 33.74 13 | 203.67 33.74 13
| 0.00 -28.62 36.05 12 |
229.2 | 0.00 9.37 33.74 13 | 203.58 33.74 13
| 0.00 -32.32 36.05 12 |
252.1 | 0.00 14.04 33.74 13 | 203.51 33.74 13
| 0.00 -36.01 36.05 12 |
275.0 | 0.00 18.70 33.74 13 | 203.43 33.74 13
| 0.00 -39.71 36.05 12 |
============================================================================
============================================================================
B E A M N O. 448 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.82 0.05 4 | 124.20 9.94 11
| 0.00 -33.63 9.94 11 |
37.5 | 0.00 5.72 0.05 4 | 123.84 9.94 11
| 0.00 -28.98 9.94 11 |
75.0 | 0.00 4.62 0.05 4 | 123.67 9.94 11
| 0.00 -24.34 9.94 11 |
112.5 | 0.00 3.52 0.05 4 | 123.29 9.94 11
| 0.00 -19.71 9.94 11 |
150.0 | 0.00 2.42 0.05 4 | 122.92 9.94 11
| 0.00 -12.32 7.95 18 |
187.5 | 0.00 1.32 0.05 4 | 122.77 9.94 11
| 0.00 -10.49 9.94 11 |
225.0 | 0.00 0.22 0.05 4 | 122.39 9.94 11
| 0.00 -5.89 9.94 11 |
262.5 | 0.00 0.01 7.90 14 | 122.01 9.94 11
| 0.00 -1.31 9.94 11 |
300.0 | 0.00 3.27 9.94 11 | 121.86 9.94 11
| 0.00 -1.11 5.22 20 |
337.5 | 0.00 7.83 9.94 11 | 121.49 9.94 11
| 0.00 -3.00 0.46 1 |
375.0 | 0.00 12.38 9.94 11 | 121.11 9.94 11
| 0.00 -3.74 0.46 1 |
412.5 | 0.00 16.92 9.94 11 | 120.96 9.94 11
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 670 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 671
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 287.00 204.28 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 214.99
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 125 mm c/c @ 120 mm c/c @ 120 mm c/c @ 125 mm c/c @ 125 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = -32.15 MX = 9.94 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 449 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 671 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 672
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.59 0.37 2 | 51.58 -1.32 11
| 0.00 -28.52 -1.32 11 |
250.0 | 0.00 0.04 0.03 8 | 45.51 -1.32 11
| 0.00 -12.99 -1.01 17 |
500.0 | 0.00 0.03 0.03 8 | 39.60 -1.32 11
| 0.00 -4.95 -1.50 12 |
750.0 | 0.00 2.21 -1.50 12 | 30.14 -1.32 11
| 0.00 -0.24 -0.37 1 |
1000.0 | 0.00 7.66 -1.50 12 | 22.44 -1.32 11
| 0.00 -0.12 -0.37 1 |
1250.0 | 0.00 13.99 -1.32 11 | 11.79 -1.32 11
| 0.00 -0.01 -0.37 1 |
1500.0 | 0.00 15.60 -1.32 11 | 2.26 -1.50 12
| 0.00 -0.11 0.37 2 |
1750.0 | 0.00 14.43 -1.32 11 | -9.86 -1.32 11
| 0.00 -0.22 0.37 2 |
2000.0 | 0.00 10.74 -1.32 11 | -18.42 -1.32 11
| 0.00 -0.34 0.37 2 |
2250.0 | 0.00 4.75 -1.32 11 | -29.32 -1.32 11
| 0.00 -0.45 0.37 2 |
2500.0 | 0.00 0.57 -0.37 1 | -35.81 -1.32 11
| 0.00 -3.29 -1.32 11 |
2750.0 | 0.00 0.68 -0.37 1 | -42.37 -1.32 11
| 0.00 -13.02 -1.32 11 |
3000.0 | 0.00 0.80 -0.37 1 | -47.21 -1.32 11
| 0.00 -24.21 -1.32 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -31.48 MX = -1.32 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 672 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 673
============================================================================
B E A M N O. 450 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3350.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.04 -0.00 3 | 49.16 -0.81 11
| 0.00 -26.91 -0.65 15 |
279.2 | 0.00 1.21 0.66 2 | 42.48 -0.81 11
| 0.00 -10.89 -1.45 12 |
558.3 | 0.00 4.17 -0.44 22 | 34.55 -0.81 11
| 0.00 -5.61 -0.43 23 |
837.5 | 0.00 5.34 -1.45 12 | 22.81 -1.45 12
| 0.00 -1.86 0.00 4 |
1116.7 | 0.00 13.73 -0.81 11 | 14.77 -1.45 12
| 0.00 -0.26 -0.66 1 |
1395.8 | 0.00 17.26 -0.81 11 | 7.72 -1.45 12
| 0.00 -0.92 -0.00 3 |
1675.0 | 0.00 17.20 -0.65 15 | -7.96 -0.66 14
| 0.00 -2.31 -0.00 3 |
1954.2 | 0.00 17.15 -0.65 15 | -16.29 -0.66 14
| 0.00 -3.71 -0.00 3 |
2233.3 | 0.00 14.90 -0.65 15 | -23.34 -0.66 14
| 0.00 -5.10 -0.00 3 |
2512.5 | 0.00 11.68 -0.43 23 | -31.74 -0.81 11
| 0.00 -7.79 -0.44 22 |
2791.7 | 0.00 8.74 -0.43 23 | -39.49 -0.81 11
| 0.00 -14.69 -0.66 14 |
3070.8 | 0.00 9.28 0.00 4 | -47.41 -0.81 11
| 0.00 -26.08 -0.66 14 |
3350.0 | 0.00 10.67 0.00 4 | -54.10 -0.81 11
| 0.00 -39.08 -0.66 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 228.26
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 673 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 674
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 35.06 MX = -0.81 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -36.46 MX = -0.81 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 451 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.44 12.57 23 | 143.95 11.34 14
| 0.00 -20.55 17.58 11 |
18.8 | 0.00 1.47 12.57 23 | 143.85 11.34 14
| 0.00 -18.94 17.58 11 |
37.5 | 0.00 0.50 12.57 23 | 143.79 11.34 14
| 0.00 -17.33 17.58 11 |
56.3 | 0.00 1.48 4.94 1 | 143.69 11.34 14
| 0.00 -18.05 11.34 14 |
75.0 | 0.00 0.51 4.94 1 | 143.60 11.34 14
| 0.00 -10.68 19.99 12 |
93.8 | 0.00 -2.40 12.57 23 | 143.54 11.34 14
| 0.00 -12.51 17.58 11 |
112.5 | 0.00 1.42 -4.94 2 | 143.46 11.34 14
| 0.00 -10.91 17.58 11 |
131.3 | 0.00 0.14 -2.27 3 | 143.38 11.34 14
| 0.00 -9.31 17.58 11 |
150.0 | 0.00 3.35 -4.94 2 | 143.32 11.34 14
| 0.00 -10.19 19.99 12 |
168.8 | 0.00 0.28 8.13 13 | 143.24 11.34 14
| 0.00 -10.08 19.99 12 |
187.5 | 0.00 0.77 11.34 14 | 143.18 11.34 14
| 0.00 -9.96 19.99 12 |
206.3 | 0.00 3.46 11.34 14 | 143.12 11.34 14
| 0.00 -9.84 19.99 12 |
225.0 | 0.00 6.14 11.34 14 | 143.05 11.34 14
| 0.00 -9.73 19.99 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 283.90 208.01 226.46 245.07 243.02
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 205.18 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 674 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 675
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 4-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 105 mm c/c @ 100 mm c/c @ 100 mm c/c @ 105 mm c/c @ 100 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 644.61 MX = 16.57 LD= 20
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 452 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.82 0.28 1 | 54.79 -0.62 11
| 0.00 -38.06 -0.83 13 |
268.8 | 0.00 7.28 0.28 1 | 49.80 -0.62 11
| 0.00 -20.31 -0.62 11 |
537.5 | 0.00 5.74 0.28 1 | 42.26 -0.62 11
| 0.00 -7.92 -0.62 11 |
806.2 | 0.00 7.59 0.09 20 | 35.09 -0.83 13
| 0.00 -4.20 -0.28 2 |
1075.0 | 0.00 8.78 -0.46 16 | 27.47 -0.83 13
| 0.00 -2.66 -0.28 2 |
1343.8 | 0.00 16.06 -0.62 11 | 18.66 -0.83 13
| 0.00 -1.12 -0.28 2 |
1612.5 | 0.00 15.22 -0.83 13 | 9.79 -0.76 21
| 0.00 -0.03 0.04 4 |
1881.3 | 0.00 17.64 -0.62 11 | -12.70 -0.15 12
| 0.00 -1.96 0.28 1 |
2150.0 | 0.00 15.32 -0.83 13 | -20.38 -0.62 11
| 0.00 -0.32 0.03 7 |
2418.8 | 0.00 12.06 -0.83 13 | -28.08 -0.62 11
| 0.00 -5.04 0.28 1 |
2687.5 | 0.00 9.33 -0.76 21 | -35.05 -0.62 11
| 0.00 -10.40 0.09 20 |
2956.2 | 0.00 8.12 -0.28 2 | -42.39 -0.62 11
| 0.00 -18.98 -0.15 12 |
3225.0 | 0.00 9.66 -0.28 2 | -47.21 -0.62 11
| 0.00 -30.46 -0.15 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 675 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 676
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 223.96 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 39.09 MX = -0.83 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -34.99 MX = -0.62 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 453 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3300.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 676 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 677
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.61 -0.52 1 | 112.44 -1.08 11
| 0.00 -116.18 -1.08 11 |
275.0 | 0.00 0.12 -0.05 7 | 106.56 -1.08 11
| 0.00 -86.00 -1.08 11 |
550.0 | 0.00 1.07 -0.52 1 | 99.67 -1.08 11
| 0.00 -46.15 -0.85 18 |
825.0 | 0.00 0.64 -0.10 4 | 91.18 -1.08 11
| 0.00 -31.34 -1.08 11 |
1100.0 | 0.00 0.53 -0.52 1 | 81.47 -1.08 11
| 0.00 -7.57 -1.08 11 |
1375.0 | 0.00 13.25 -1.08 11 | 70.38 -1.08 11
| 0.00 -0.26 0.10 3 |
1650.0 | 0.00 30.88 -1.08 11 | 57.99 -1.08 11
| 0.00 -0.07 0.10 3 |
1925.0 | 0.00 35.78 -1.48 12 | 45.82 -1.08 11
| 0.00 -0.28 -0.52 1 |
2200.0 | 0.00 56.36 -1.08 11 | 36.79 -1.08 11
| 0.00 -0.56 -0.52 1 |
2475.0 | 0.00 64.72 -1.08 11 | 25.37 -1.08 11
| 0.00 -0.83 -0.52 1 |
2750.0 | 0.00 70.73 -1.08 11 | 18.40 -1.08 11
| 0.00 -1.10 -0.52 1 |
3025.0 | 0.00 74.76 -1.08 11 | 11.09 -1.08 11
| 0.00 -1.37 -0.52 1 |
3300.0 | 0.00 77.14 -1.08 11 | 3.77 -1.48 12
| 0.00 -1.64 -0.52 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 754.84 186.94 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 184.21 388.17 471.65
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 10-10í 3-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 5-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 535.0 mm AWAY FROM START SUPPORT
VY = 99.98 MX = -1.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 677 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 678
============================================================================
B E A M N O. 454 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.91 -0.64 3 | 48.12 0.29 11
| 0.00 -17.52 0.29 11 |
291.7 | 0.00 1.33 0.04 1 | 41.01 0.29 11
| 0.00 -4.44 1.02 23 |
583.3 | 0.00 6.08 -0.54 14 | 32.84 0.29 11
| 0.00 -0.87 0.64 4 |
875.0 | 0.00 12.05 0.28 12 | 24.42 0.29 11
| 0.00 -0.85 0.64 4 |
1166.7 | 0.00 20.53 0.29 11 | 12.71 1.00 15
| 0.00 -0.83 0.64 4 |
1458.3 | 0.00 20.06 0.18 13 | 5.80 1.00 15
| 0.00 -0.81 0.64 4 |
1750.0 | 0.00 21.35 0.18 13 | -1.10 1.00 15
| 0.00 -0.79 0.64 4 |
2041.7 | 0.00 23.01 0.29 11 | -8.01 1.00 15
| 0.00 -0.77 0.64 4 |
2333.3 | 0.00 18.80 0.29 11 | -14.92 1.00 15
| 0.00 -0.21 0.00 7 |
2625.0 | 0.00 13.16 0.18 13 | -27.39 0.29 11
| 0.00 -2.92 0.04 1 |
2916.7 | 0.00 6.87 -0.00 21 | -35.81 0.29 11
| 0.00 -3.49 0.12 20 |
3208.3 | 0.00 3.98 -0.04 2 | -43.98 0.29 11
| 0.00 -11.86 0.28 12 |
3500.0 | 0.00 4.51 -0.04 2 | -51.09 0.29 11
| 0.00 -23.59 0.28 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 678 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 679
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 34.09 MX = 0.29 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -37.93 MX = 0.29 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 455 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 42.22 -8.01 11 | 34.96 -8.01 11
| 0.00 -0.78 0.16 1 |
158.3 | 0.00 47.38 -8.01 11 | 30.03 -8.01 11
| 0.00 -0.74 0.16 1 |
316.7 | 0.00 51.75 -8.01 11 | 25.19 -8.01 11
| 0.00 -0.70 0.16 1 |
475.0 | 0.00 45.04 -6.59 13 | 18.97 -8.01 11
| 0.00 -0.06 0.01 7 |
633.3 | 0.00 47.15 -6.59 13 | 15.34 -8.01 11
| 0.00 -0.63 0.16 1 |
791.7 | 0.00 59.81 -8.01 11 | 9.11 -8.01 11
| 0.00 -0.59 0.16 1 |
950.0 | 0.00 48.94 -6.49 14 | 4.63 -8.01 11
| 0.00 -0.55 0.16 1 |
1108.3 | 0.00 60.95 -8.01 11 | -1.32 -8.01 11
| 0.00 -0.51 0.16 1 |
1266.7 | 0.00 60.24 -8.01 11 | -7.33 -8.01 11
| 0.00 -0.47 0.16 1 |
1425.0 | 0.00 58.73 -8.01 11 | -13.40 -8.01 11
| 0.00 -0.43 0.16 1 |
1583.3 | 0.00 56.40 -8.01 11 | -16.03 -8.01 11
| 0.00 -0.40 0.16 1 |
1741.7 | 0.00 53.09 -8.01 11 | -22.96 -8.01 11
| 0.00 -0.36 0.16 1 |
1900.0 | 0.00 49.04 -8.01 11 | -27.98 -8.01 11
| 0.00 -0.32 0.16 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 320.58 323.60 346.51 423.45 362.62
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 679 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 680
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 4-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 456 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3375.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 42.31 4.39 11 | 23.58 4.39 11
| 0.00 -4.37 0.21 4 |
281.3 | 0.00 38.62 3.50 18 | 16.83 4.39 11
| 0.00 -3.23 0.21 4 |
562.5 | 0.00 51.64 4.39 11 | 8.37 4.64 12
| 0.00 -2.09 0.21 4 |
843.8 | 0.00 42.06 4.64 12 | 2.01 4.64 12
| 0.00 -0.29 0.94 1 |
1125.0 | 0.00 41.64 4.64 12 | -7.64 4.39 11
| 0.00 -0.04 -0.94 2 |
1406.3 | 0.00 48.30 4.39 11 | -19.00 4.39 11
| 0.00 -0.38 -0.94 2 |
1687.5 | 0.00 36.34 3.77 15 | -28.56 4.39 11
| 0.00 -0.71 -0.94 2 |
1968.8 | 0.00 30.12 3.77 15 | -38.12 4.39 11
| 0.00 -3.61 -0.21 3 |
2250.0 | 0.00 21.59 3.77 15 | -49.48 4.39 11
| 0.00 -4.75 -0.21 3 |
2531.3 | 0.00 10.93 3.77 15 | -57.83 4.39 11
| 0.00 -6.19 1.67 22 |
2812.5 | 0.00 4.27 2.30 23 | -65.79 4.39 11
| 0.00 -18.53 3.26 14 |
3093.8 | 0.00 8.17 0.21 4 | -73.94 4.39 11
| 0.00 -35.66 3.26 14 |
3375.0 | 0.00 9.31 0.21 4 | -80.70 4.39 11
| 0.00 -54.07 4.39 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 355.91
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 284.23 285.22 242.34 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 680 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 681
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 4-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -67.73 MX = 4.39 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 457 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 33.74 2.26 11 | 27.55 2.26 11
| 0.00 -1.25 0.37 2 |
291.7 | 0.00 33.80 1.37 12 | 20.57 2.26 11
| 0.00 -0.99 0.37 2 |
583.3 | 0.00 45.55 2.26 11 | 12.38 2.26 11
| 0.00 -0.10 0.09 3 |
875.0 | 0.00 47.95 2.26 11 | 4.54 2.25 13
| 0.00 -0.09 0.09 3 |
1166.7 | 0.00 47.64 2.26 11 | -5.92 2.26 11
| 0.00 -0.08 0.09 3 |
1458.3 | 0.00 44.52 2.26 11 | -14.99 2.26 11
| 0.00 -0.02 -0.37 1 |
1750.0 | 0.00 38.23 2.26 11 | -26.88 2.26 11
| 0.00 -0.28 -0.37 1 |
2041.7 | 0.00 28.84 2.26 11 | -38.78 2.26 11
| 0.00 -0.53 -0.37 1 |
2333.3 | 0.00 16.27 2.26 11 | -47.84 2.26 11
| 0.00 -0.79 -0.37 1 |
2625.0 | 0.00 1.97 2.25 13 | -58.13 2.26 11
| 0.00 -0.53 1.37 12 |
2916.7 | 0.00 1.29 0.37 2 | -66.15 2.26 11
| 0.00 -17.18 2.26 11 |
3208.3 | 0.00 1.55 0.37 2 | -74.34 2.26 11
| 0.00 -37.65 2.26 11 |
3500.0 | 0.00 1.80 0.37 2 | -81.31 2.26 11
| 0.00 -60.35 2.26 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 681 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 682
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 373.09
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 212.39 297.05 238.86 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 4-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -68.40 MX = 2.26 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 458 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 682 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 683
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 51.79 2.51 11 | -53.96 4.40 12
| 0.00 -0.64 1.99 1 |
122.9 | 0.00 33.86 4.40 12 | -70.31 2.51 11
| 0.00 -0.03 -0.54 3 |
245.8 | 0.00 34.70 2.51 11 | -72.65 2.51 11
| 0.00 -0.89 1.99 1 |
368.8 | 0.00 19.13 4.40 12 | -76.95 2.51 11
| 0.00 -1.02 1.99 1 |
491.7 | 0.00 15.78 2.51 11 | -81.01 2.51 11
| 0.00 -1.14 1.99 1 |
614.6 | 0.00 3.00 4.40 12 | -83.97 2.51 11
| 0.00 -1.27 1.99 1 |
737.5 | 0.00 1.39 -1.99 2 | -87.96 2.51 11
| 0.00 -5.64 4.40 12 |
860.4 | 0.00 1.52 -1.99 2 | -91.64 2.51 11
| 0.00 -15.98 2.51 11 |
983.3 | 0.00 1.64 -1.99 2 | -94.60 2.51 11
| 0.00 -27.43 2.51 11 |
1106.3 | 0.00 1.76 -1.99 2 | -97.75 2.51 11
| 0.00 -39.28 2.51 11 |
1229.2 | 0.00 1.89 -1.99 2 | -100.51 2.51 11
| 0.00 -51.46 2.51 11 |
1352.1 | 0.00 2.01 -1.99 2 | -102.86 2.51 11
| 0.00 -63.96 2.51 11 |
1475.0 | 0.00 2.14 -1.99 2 | -105.09 2.51 11
| 0.00 -76.75 2.51 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 247.47 484.48
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 323.73 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 4-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 541.4 mm AWAY FROM END SUPPORT
VY = -93.36 MX = 2.51 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 683 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 684
============================================================================
B E A M N O. 459 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.27 0.73 1 | 104.33 -3.25 11
| 0.00 -90.42 -3.25 11 |
122.9 | 0.00 2.15 0.73 1 | 101.43 -3.25 11
| 0.00 -77.77 -3.25 11 |
245.8 | 0.00 2.04 0.73 1 | 98.26 -3.25 11
| 0.00 -65.49 -3.25 11 |
368.8 | 0.00 0.18 0.06 7 | 95.13 -3.25 11
| 0.00 -45.19 -3.48 13 |
491.7 | 0.00 1.81 0.73 1 | 91.92 -3.25 11
| 0.00 -35.86 -3.48 13 |
614.6 | 0.00 1.69 0.73 1 | 88.14 -3.25 11
| 0.00 -26.86 -3.48 13 |
737.5 | 0.00 1.58 0.73 1 | 84.70 -3.25 11
| 0.00 -20.41 -3.25 11 |
860.4 | 0.00 1.46 0.73 1 | 81.26 -3.25 11
| 0.00 -9.93 -3.48 13 |
983.3 | 0.00 1.34 0.73 1 | 77.48 -3.25 11
| 0.00 -1.99 -3.48 13 |
1106.3 | 0.00 8.86 -3.25 11 | 74.27 -3.25 11
| 0.00 -1.23 -0.73 2 |
1229.2 | 0.00 17.79 -3.25 11 | 71.14 -3.25 11
| 0.00 -1.11 -0.73 2 |
1352.1 | 0.00 26.34 -3.25 11 | 67.96 -3.25 11
| 0.00 -1.00 -0.73 2 |
1475.0 | 0.00 34.51 -3.25 11 | 65.06 -3.25 11
| 0.00 -0.88 -0.73 2 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 582.79 294.83 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 226.46
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 684 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 685
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 667.0 mm AWAY FROM START SUPPORT
VY = 86.73 MX = -3.25 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 461 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.66 -0.42 1 | 45.12 6.97 11
| 0.00 -14.85 6.97 11 |
262.5 | 0.00 1.43 -0.42 1 | 39.49 6.97 11
| 0.00 -3.73 6.97 11 |
525.0 | 0.00 5.71 6.97 11 | 32.10 6.97 11
| 0.00 -0.12 0.20 3 |
787.5 | 0.00 13.19 6.97 11 | 24.54 6.97 11
| 0.00 -0.98 0.42 2 |
1050.0 | 0.00 18.59 6.97 11 | 16.65 6.97 11
| 0.00 -0.75 0.42 2 |
1312.5 | 0.00 21.93 6.97 11 | 8.75 6.97 11
| 0.00 -0.00 0.01 9 |
1575.0 | 0.00 23.19 6.97 11 | 0.85 6.97 11
| 0.00 -0.02 0.04 8 |
1837.5 | 0.00 22.37 6.97 11 | -7.05 6.97 11
| 0.00 -0.07 0.42 2 |
2100.0 | 0.00 15.78 6.08 13 | -14.94 6.97 11
| 0.00 -0.16 -0.42 1 |
2362.5 | 0.00 14.54 6.97 11 | -22.40 6.97 11
| 0.00 -0.38 -0.42 1 |
2625.0 | 0.00 7.62 6.97 11 | -30.03 6.97 11
| 0.00 -0.61 -0.42 1 |
2887.5 | 0.00 0.13 6.08 13 | -36.16 6.97 11
| 0.00 -1.09 6.97 11 |
3150.0 | 0.00 1.06 0.42 2 | -41.11 6.97 11
| 0.00 -11.25 6.97 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 196.47 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 685 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 686
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 463 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 27.83 2.21 11 | -8.86 2.21 11
| 0.00 -0.54 0.78 1 |
158.3 | 0.00 20.48 2.70 12 | -13.14 2.21 11
| 0.00 -0.32 0.78 1 |
316.7 | 0.00 23.61 2.21 11 | -18.06 2.21 11
| 0.00 -0.10 0.78 1 |
475.0 | 0.00 20.35 2.21 11 | -22.43 2.21 11
| 0.00 -0.01 0.18 4 |
633.3 | 0.00 16.20 2.21 11 | -28.00 2.21 11
| 0.00 -0.23 -0.18 3 |
791.7 | 0.00 9.55 1.97 15 | -34.21 2.21 11
| 0.00 -0.55 -0.78 2 |
950.0 | 0.00 5.24 2.70 12 | -39.53 2.21 11
| 0.00 -0.72 -0.18 3 |
1108.3 | 0.00 0.65 2.38 20 | -44.53 2.21 11
| 0.00 -1.25 2.21 11 |
1266.7 | 0.00 1.20 0.18 4 | -49.79 2.21 11
| 0.00 -8.67 2.21 11 |
1425.0 | 0.00 1.43 0.78 1 | -52.98 2.21 11
| 0.00 -16.79 2.21 11 |
1583.3 | 0.00 1.65 0.78 1 | -56.84 2.21 11
| 0.00 -25.56 2.21 11 |
1741.7 | 0.00 1.87 0.78 1 | -60.45 2.21 11
| 0.00 -34.88 2.21 11 |
1900.0 | 0.00 2.09 0.78 1 | -63.30 2.21 11
| 0.00 -44.69 2.21 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 276.82
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 686 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 687
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -49.15 MX = 2.21 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 464 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 63.78 -0.85 11 | -3.15 -0.95 13
| 0.00 -0.76 0.22 1 |
158.3 | 0.00 63.12 -0.85 11 | -6.15 -0.95 13
| 0.00 -0.02 0.10 4 |
316.7 | 0.00 61.84 -0.85 11 | -10.25 -0.85 11
| 0.00 -0.03 0.10 4 |
475.0 | 0.00 59.90 -0.85 11 | -14.39 -0.85 11
| 0.00 -0.02 0.02 7 |
633.3 | 0.00 57.28 -0.85 11 | -18.65 -0.85 11
| 0.00 -0.07 0.22 1 |
791.7 | 0.00 53.92 -0.85 11 | -23.86 -0.85 11
| 0.00 -0.10 -0.22 2 |
950.0 | 0.00 49.80 -0.85 11 | -28.50 -0.85 11
| 0.00 -0.27 -0.22 2 |
1108.3 | 0.00 44.89 -0.85 11 | -33.15 -0.85 11
| 0.00 -0.07 0.10 4 |
1266.7 | 0.00 32.12 -0.42 12 | -38.36 -0.85 11
| 0.00 -0.61 -0.22 2 |
1425.0 | 0.00 32.82 -0.85 11 | -42.62 -0.85 11
| 0.00 -0.79 -0.22 2 |
1583.3 | 0.00 25.74 -0.85 11 | -46.75 -0.85 11
| 0.00 -0.96 -0.22 2 |
1741.7 | 0.00 17.99 -0.85 11 | -50.95 -0.85 11
| 0.00 -1.13 -0.22 2 |
1900.0 | 0.00 9.63 -0.85 11 | -54.70 -0.85 11
| 0.00 -1.30 -0.22 2 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 687 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 688
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 380.04 355.95 294.20 193.41 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 5-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 465 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 3.66 -3.87 2 | -71.84 -14.61 13
| 0.00 -13.04 -12.46 11 |
27.1 | 0.00 0.25 -0.35 8 | -72.01 -14.61 13
| 0.00 -14.03 -12.46 11 |
54.2 | 0.00 0.49 -1.50 3 | -72.10 -14.61 13
| 0.00 -15.03 -12.46 11 |
81.3 | 0.00 0.78 -3.87 2 | -72.26 -14.61 13
| 0.00 -16.03 -12.46 11 |
108.3 | 0.00 0.18 3.87 1 | -72.41 -14.61 13
| 0.00 -17.04 -12.46 11 |
135.4 | 0.00 1.14 3.87 1 | -72.50 -14.61 13
| 0.00 -18.05 -12.46 11 |
162.5 | 0.00 0.58 1.50 4 | -72.64 -14.61 13
| 0.00 -17.78 -14.61 13 |
189.6 | 0.00 3.06 3.87 1 | -72.77 -14.61 13
| 0.00 -19.75 -14.61 13 |
216.7 | 0.00 4.03 3.87 1 | -72.85 -14.61 13
| 0.00 -21.11 -12.46 11 |
243.8 | 0.00 4.99 3.87 1 | -72.97 -14.61 13
| 0.00 -23.69 -14.61 13 |
270.8 | 0.00 5.95 3.87 1 | -73.07 -14.61 13
| 0.00 -25.67 -14.61 13 |
297.9 | 0.00 6.91 3.87 1 | -73.16 -14.61 13
| 0.00 -27.65 -14.61 13 |
325.0 | 0.00 7.87 3.87 1 | -73.25 -14.61 13
| 0.00 -29.64 -14.61 13 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 688 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 689
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 189.56 207.07 238.22 273.49 309.36
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 4-10í 4-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 140 mm c/c @ 140 mm c/c @ 145 mm c/c @ 145 mm c/c @ 145 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT670.0 mm AWAY FROM START SUPPORT
VY = 32.68 MX = -14.61 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 467 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 689 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 690
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 22.32 0.06 1 | 51.33 -1.40 13
| 0.00 -51.68 -1.40 13 |
264.6 | 0.00 18.79 0.06 1 | 47.70 -1.40 13
| 0.00 -39.34 -0.94 21 |
529.2 | 0.00 16.86 -0.76 20 | 43.21 -1.40 13
| 0.00 -28.93 -0.94 21 |
793.8 | 0.00 2.01 -0.68 15 | 38.84 -1.40 13
| 0.00 -19.32 -0.94 21 |
1058.3 | 0.00 6.20 -0.68 15 | 32.89 -1.40 13
| 0.00 -6.20 -1.40 13 |
1322.9 | 0.00 13.07 -1.25 12 | 27.78 -1.40 13
| 0.00 -4.68 -0.06 2 |
1587.5 | 0.00 11.05 -1.25 12 | 21.24 -1.40 13
| 0.00 -0.31 -0.54 3 |
1852.1 | 0.00 12.79 -1.66 11 | 20.27 -0.94 21
| 0.00 -0.22 0.00 7 |
2116.7 | 0.00 14.95 -0.94 21 | -22.41 -1.25 12
| 0.00 -2.78 -0.76 20 |
2381.2 | 0.00 18.96 -0.94 21 | -28.37 -1.25 12
| 0.00 -9.36 -0.76 20 |
2645.8 | 0.00 22.12 -0.94 21 | -32.74 -1.25 12
| 0.00 -16.79 -0.76 20 |
2910.4 | 0.00 24.47 -0.94 21 | -37.22 -1.25 12
| 0.00 -25.02 -0.76 20 |
3175.0 | 0.00 26.07 -0.94 21 | -40.86 -1.25 12
| 0.00 -34.01 -0.76 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 311.90 178.08 178.08 178.08 199.94
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -30.43 MX = -1.25 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 690 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 691
============================================================================
B E A M N O. 469 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.61 -0.06 3 | 41.60 -0.38 11
| 0.00 -22.74 -0.23 15 |
245.8 | 0.00 10.64 -0.26 22 | 35.71 -0.38 11
| 0.00 -14.26 -0.07 23 |
491.7 | 0.00 11.16 -0.38 14 | 28.76 -0.38 11
| 0.00 -5.63 -0.23 15 |
737.5 | 0.00 13.97 -0.26 22 | 23.95 -0.23 15
| 0.00 -5.69 0.06 4 |
983.3 | 0.00 14.22 -0.38 11 | 18.27 -0.23 15
| 0.00 -1.02 0.18 1 |
1229.2 | 0.00 14.37 -0.52 13 | 10.75 -0.23 15
| 0.00 -3.07 0.06 4 |
1475.0 | 0.00 17.18 -0.38 11 | -9.74 -0.26 22
| 0.00 -1.77 0.06 4 |
1720.8 | 0.00 12.84 -0.52 13 | -14.86 -0.38 14
| 0.00 -0.38 0.18 1 |
1966.7 | 0.00 11.69 -0.38 11 | -22.38 -0.38 14
| 0.00 -0.85 -0.06 3 |
2212.5 | 0.00 7.34 -0.23 15 | -28.06 -0.38 14
| 0.00 -2.16 -0.06 3 |
2458.3 | 0.00 4.02 -0.07 23 | -33.90 -0.38 11
| 0.00 -6.38 -0.26 22 |
2704.2 | 0.00 4.77 0.06 4 | -40.85 -0.38 11
| 0.00 -14.38 -0.38 14 |
2950.0 | 0.00 6.08 0.06 4 | -46.73 -0.38 11
| 0.00 -24.57 -0.38 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 691 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 692
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 27.67 MX = -0.38 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -32.53 MX = -0.38 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 470 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 275.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.34 39.52 12 | -135.46 48.02 11
| 0.00 -4.08 48.02 11 |
22.9 | 0.00 0.93 26.56 20 | -135.64 48.02 11
| 0.00 -6.68 38.45 14 |
45.8 | 0.00 1.56 0.92 1 | -135.73 48.02 11
| 0.00 -10.29 48.02 11 |
68.8 | 0.00 0.28 -0.03 4 | -135.89 48.02 11
| 0.00 -9.72 39.52 12 |
91.7 | 0.00 0.12 0.92 1 | -136.04 48.02 11
| 0.00 -13.07 39.52 12 |
114.6 | 0.00 0.60 -0.92 2 | -136.13 48.02 11
| 0.00 -19.64 48.02 11 |
137.5 | 0.00 1.32 -0.92 2 | -136.27 48.02 11
| 0.00 -19.79 39.52 12 |
160.4 | 0.00 0.72 0.03 3 | -136.40 48.02 11
| 0.00 -25.89 48.02 11 |
183.3 | 0.00 0.97 0.03 3 | -136.49 48.02 11
| 0.00 -23.52 38.52 16 |
206.2 | 0.00 3.48 -0.92 2 | -136.61 48.02 11
| 0.00 -32.14 48.02 11 |
229.2 | 0.00 4.20 -0.92 2 | -136.71 48.02 11
| 0.00 -35.27 48.02 11 |
252.1 | 0.00 4.92 -0.92 2 | -136.80 48.02 11
| 0.00 -38.41 48.02 11 |
275.0 | 0.00 5.64 -0.92 2 | -136.90 48.02 11
| 0.00 -41.54 48.02 11 |
============================================================================
============================================================================
B E A M N O. 471 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 692 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 693
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.27 0.08 1 | -47.43 9.80 11
| 0.00 -8.98 9.80 11 |
37.5 | 0.00 1.07 0.00 4 | -47.79 9.80 11
| 0.00 -10.77 9.80 11 |
75.0 | 0.00 0.80 0.08 1 | -47.96 9.80 11
| 0.00 -12.56 9.80 11 |
112.5 | 0.00 0.56 0.08 1 | -48.34 9.80 11
| 0.00 -14.37 9.80 11 |
150.0 | 0.00 0.22 0.00 4 | -48.71 9.80 11
| 0.00 -16.19 9.80 11 |
187.5 | 0.00 0.09 0.08 1 | -48.86 9.80 11
| 0.00 -18.02 9.80 11 |
225.0 | 0.00 0.35 -0.00 3 | -49.24 9.80 11
| 0.00 -19.86 9.80 11 |
262.5 | 0.00 0.63 -0.00 3 | -49.62 9.80 11
| 0.00 -18.13 7.84 15 |
300.0 | 0.00 0.92 -0.00 3 | -49.77 9.80 11
| 0.00 -23.57 9.80 11 |
337.5 | 0.00 1.20 -0.00 3 | -50.14 9.80 11
| 0.00 -25.45 9.80 11 |
375.0 | 0.00 1.49 -0.00 3 | -50.52 9.80 11
| 0.00 -27.33 9.80 11 |
412.5 | 0.00 1.77 -0.00 3 | -50.67 9.80 11
| 0.00 -29.23 9.80 11 |
450.0 | 0.00 2.06 -0.00 3 | -51.05 9.80 11
| 0.00 -31.14 9.80 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 203.73 236.66 270.57
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 4-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 13.61 MX = 9.80 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 693 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 694
============================================================================
B E A M N O. 472 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.13 0.35 2 | 53.05 -1.52 11
| 0.00 -30.39 -1.52 11 |
250.0 | 0.00 0.11 0.35 2 | 46.97 -1.52 11
| 0.00 -17.80 -1.52 11 |
500.0 | 0.00 0.08 0.35 2 | 41.06 -1.52 11
| 0.00 -6.80 -1.52 11 |
750.0 | 0.00 2.35 -1.52 11 | 31.60 -1.52 11
| 0.00 -0.01 -0.03 7 |
1000.0 | 0.00 9.35 -1.52 11 | 23.90 -1.52 11
| 0.00 -0.03 -0.35 1 |
1250.0 | 0.00 13.95 -1.52 11 | 13.25 -1.52 11
| 0.00 -0.01 0.16 3 |
1500.0 | 0.00 15.92 -1.52 11 | 3.00 -1.63 12
| 0.00 -0.02 0.35 2 |
1750.0 | 0.00 15.11 -1.52 11 | -8.40 -1.52 11
| 0.00 -0.05 0.35 2 |
2000.0 | 0.00 11.78 -1.52 11 | -16.96 -1.52 11
| 0.00 -0.11 0.16 3 |
2250.0 | 0.00 6.16 -1.52 11 | -27.86 -1.52 11
| 0.00 -0.10 0.35 2 |
2500.0 | 0.00 0.12 -0.35 1 | -34.35 -1.52 11
| 0.00 -1.51 -1.52 11 |
2750.0 | 0.00 0.15 -0.35 1 | -40.91 -1.52 11
| 0.00 -10.88 -1.52 11 |
3000.0 | 0.00 0.17 -0.35 1 | -45.75 -1.52 11
| 0.00 -21.70 -1.52 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 186.11 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 694 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 695
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -30.02 MX = -1.52 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 473 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3350.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.64 -0.01 3 | 47.59 -0.36 11
| 0.00 -24.09 -0.27 15 |
279.2 | 0.00 1.43 0.54 2 | 40.90 -0.36 11
| 0.00 -11.77 -0.18 23 |
558.3 | 0.00 4.88 -0.22 22 | 32.98 -0.36 11
| 0.00 -2.89 -0.27 15 |
837.5 | 0.00 9.15 -0.36 11 | 21.74 -0.94 12
| 0.00 -1.82 0.01 4 |
1116.7 | 0.00 14.90 -0.36 11 | 13.70 -0.94 12
| 0.00 -0.35 -0.54 1 |
1395.8 | 0.00 17.99 -0.36 11 | 6.65 -0.94 12
| 0.00 -0.01 0.54 2 |
1675.0 | 0.00 18.31 -0.36 11 | -8.70 -0.30 14
| 0.00 -1.99 -0.01 3 |
1954.2 | 0.00 16.50 -0.27 15 | -17.03 -0.30 14
| 0.00 -3.26 -0.01 3 |
2233.3 | 0.00 12.24 -0.18 23 | -24.08 -0.30 14
| 0.00 -4.53 -0.01 3 |
2512.5 | 0.00 10.17 -0.18 23 | -33.31 -0.36 11
| 0.00 -7.24 -0.22 22 |
2791.7 | 0.00 6.84 -0.18 23 | -41.06 -0.36 11
| 0.00 -14.89 -0.30 14 |
3070.8 | 0.00 8.35 0.01 4 | -48.98 -0.36 11
| 0.00 -26.48 -0.30 14 |
3350.0 | 0.00 9.62 0.01 4 | -55.67 -0.36 11
| 0.00 -39.69 -0.30 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 228.44
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 695 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 696
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 33.49 MX = -0.36 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -38.03 MX = -0.36 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 474 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.21 4.64 1 | -83.79 21.77 12
| 0.00 -5.56 20.26 11 |
18.8 | 0.00 0.55 2.17 4 | -83.89 21.77 12
| 0.00 -7.15 20.26 11 |
37.5 | 0.00 0.72 4.64 1 | -83.95 21.77 12
| 0.00 -8.75 20.26 11 |
56.3 | 0.00 0.47 4.64 1 | -84.05 21.77 12
| 0.00 -10.35 20.26 11 |
75.0 | 0.00 0.23 4.64 1 | -84.14 21.77 12
| 0.00 -11.95 20.26 11 |
93.8 | 0.00 0.02 -4.64 2 | -84.20 21.77 12
| 0.00 -13.56 20.26 11 |
112.5 | 0.00 0.55 -2.17 3 | -84.28 21.77 12
| 0.00 -15.16 20.26 11 |
131.3 | 0.00 0.51 -4.64 2 | -84.36 21.77 12
| 0.00 -14.03 21.77 12 |
150.0 | 0.00 0.76 -4.64 2 | -84.42 21.77 12
| 0.00 -15.61 21.77 12 |
168.8 | 0.00 1.01 -4.64 2 | -84.50 21.77 12
| 0.00 -19.99 20.26 11 |
187.5 | 0.00 1.25 -4.64 2 | -84.57 21.77 12
| 0.00 -21.60 20.26 11 |
206.3 | 0.00 1.50 -4.64 2 | -84.63 21.77 12
| 0.00 -23.21 20.26 11 |
225.0 | 0.00 1.74 -4.64 2 | -84.69 21.77 12
| 0.00 -24.83 20.26 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 696 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 697
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 220.97 249.35 278.11 307.27 336.81
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 201.07 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 100 mm c/c @ 100 mm c/c @ 100 mm c/c @ 100 mm c/c @ 100 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 1447.32 MX = 20.26 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 475 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 697 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 698
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.14 0.28 1 | 63.91 -0.80 11
| 0.00 -48.42 -0.98 13 |
268.8 | 0.00 0.61 0.03 7 | 58.91 -0.80 11
| 0.00 -31.83 -0.80 11 |
537.5 | 0.00 0.36 0.04 4 | 51.38 -0.80 11
| 0.00 -16.98 -0.80 11 |
806.2 | 0.00 3.89 0.28 1 | 44.38 -0.80 11
| 0.00 -7.95 -0.98 13 |
1075.0 | 0.00 8.13 -0.31 12 | 34.20 -0.98 13
| 0.00 -2.48 -0.28 2 |
1343.8 | 0.00 14.34 -0.80 11 | 25.40 -0.98 13
| 0.00 -1.06 -0.28 2 |
1612.5 | 0.00 19.13 -0.80 11 | 15.96 -0.98 13
| 0.00 -0.35 0.28 1 |
1881.3 | 0.00 20.82 -0.80 11 | 9.02 -0.85 21
| 0.00 -1.77 0.28 1 |
2150.0 | 0.00 19.45 -0.98 13 | -15.33 -0.31 12
| 0.00 -0.29 0.03 7 |
2418.8 | 0.00 18.00 -0.98 13 | -18.96 -0.80 11
| 0.00 -4.60 0.28 1 |
2687.5 | 0.00 14.80 -0.98 13 | -25.94 -0.80 11
| 0.00 -6.01 0.28 1 |
2956.2 | 0.00 12.14 -0.85 21 | -33.28 -0.80 11
| 0.00 -10.14 -0.02 20 |
3225.0 | 0.00 9.83 -0.85 21 | -38.09 -0.80 11
| 0.00 -17.13 -0.31 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 287.11 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 49.39 MX = -0.80 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 698 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 699
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -25.87 MX = -0.80 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 476 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3300.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.87 -0.50 1 | 116.72 -1.33 11
| 0.00 -125.25 -1.33 11 |
275.0 | 0.00 1.22 -0.10 4 | 110.84 -1.33 11
| 0.00 -77.00 -0.47 13 |
550.0 | 0.00 1.28 -0.50 1 | 103.95 -1.33 11
| 0.00 -52.68 -0.94 14 |
825.0 | 0.00 0.98 -0.50 1 | 95.46 -1.33 11
| 0.00 -30.47 -0.94 14 |
1100.0 | 0.00 0.69 -0.50 1 | 85.75 -1.33 11
| 0.00 -11.93 -1.33 11 |
1375.0 | 0.00 10.06 -1.33 11 | 74.65 -1.33 11
| 0.00 -0.40 0.50 2 |
1650.0 | 0.00 23.10 -1.12 16 | 62.26 -1.33 11
| 0.00 -0.10 0.50 2 |
1925.0 | 0.00 35.22 -1.66 12 | 50.09 -1.33 11
| 0.00 -0.03 -0.10 4 |
2200.0 | 0.00 44.77 -1.66 12 | 41.07 -1.33 11
| 0.00 -0.48 -0.50 1 |
2475.0 | 0.00 66.23 -1.33 11 | 29.64 -1.33 11
| 0.00 -0.78 -0.50 1 |
2750.0 | 0.00 73.42 -1.33 11 | 22.68 -1.33 11
| 0.00 -1.07 -0.50 1 |
3025.0 | 0.00 78.62 -1.33 11 | 15.37 -1.33 11
| 0.00 -1.37 -0.50 1 |
3300.0 | 0.00 82.18 -1.33 11 | 10.46 -1.33 11
| 0.00 -1.66 -0.50 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 830.42 180.60 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 400.27 507.44
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 699 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 700
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 11-10í 3-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 6-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 533.6 mm AWAY FROM START SUPPORT
VY = 104.26 MX = -1.33 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 477 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.11 0.03 1 | 46.15 0.36 11
| 0.00 -12.50 0.36 11 |
291.7 | 0.00 1.80 0.33 12 | 39.04 0.36 11
| 0.00 -3.24 0.04 21 |
583.3 | 0.00 10.17 0.36 11 | 30.87 0.36 11
| 0.00 -0.75 0.56 4 |
875.0 | 0.00 17.97 0.36 11 | 22.45 0.36 11
| 0.00 -0.41 -0.03 2 |
1166.7 | 0.00 17.70 0.96 15 | 11.04 0.96 15
| 0.00 -0.16 0.03 1 |
1458.3 | 0.00 26.03 0.36 11 | 4.13 0.96 15
| 0.00 -0.76 0.56 4 |
1750.0 | 0.00 22.59 0.24 13 | -2.78 0.96 15
| 0.00 -0.76 0.56 4 |
2041.7 | 0.00 24.01 0.36 11 | -9.69 0.96 15
| 0.00 -0.17 -0.00 7 |
2333.3 | 0.00 19.23 0.36 11 | -20.72 0.36 11
| 0.00 -2.44 0.03 1 |
2625.0 | 0.00 13.15 0.24 13 | -29.36 0.36 11
| 0.00 -3.01 0.03 1 |
2916.7 | 0.00 6.75 0.04 21 | -37.77 0.36 11
| 0.00 -3.97 0.15 20 |
3208.3 | 0.00 4.14 -0.03 2 | -45.95 0.36 11
| 0.00 -13.08 0.33 12 |
3500.0 | 0.00 4.71 -0.03 2 | -53.06 0.36 11
| 0.00 -25.32 0.33 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 700 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 701
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 32.12 MX = 0.36 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -39.90 MX = 0.36 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 478 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 701 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 702
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 41.59 -7.90 11 | 36.03 -7.90 11
| 0.00 -0.78 0.18 1 |
158.3 | 0.00 46.92 -7.90 11 | 31.09 -7.90 11
| 0.00 -0.74 0.18 1 |
316.7 | 0.00 51.46 -7.90 11 | 26.26 -7.90 11
| 0.00 -0.70 0.18 1 |
475.0 | 0.00 55.18 -7.90 11 | 20.03 -7.90 11
| 0.00 -0.66 0.18 1 |
633.3 | 0.00 58.05 -7.90 11 | 16.41 -7.90 11
| 0.00 -0.62 0.18 1 |
791.7 | 0.00 48.43 -6.40 14 | 10.18 -7.90 11
| 0.00 -0.58 0.18 1 |
950.0 | 0.00 61.22 -7.90 11 | 5.70 -7.90 11
| 0.00 -0.54 0.18 1 |
1108.3 | 0.00 61.50 -7.90 11 | -0.25 -7.90 11
| 0.00 -0.50 0.18 1 |
1266.7 | 0.00 48.83 -6.33 17 | -6.26 -7.90 11
| 0.00 -0.46 0.18 1 |
1425.0 | 0.00 59.62 -7.90 11 | -12.33 -7.90 11
| 0.00 -0.42 0.18 1 |
1583.3 | 0.00 57.46 -7.90 11 | -14.96 -7.90 11
| 0.00 -0.38 0.18 1 |
1741.7 | 0.00 54.32 -7.90 11 | -21.89 -7.90 11
| 0.00 -0.34 0.18 1 |
1900.0 | 0.00 50.44 -7.90 11 | -26.91 -7.90 11
| 0.00 -0.30 0.18 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 315.66 399.89 438.14 428.00 370.23
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 4-12í 4-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 479 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3375.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 702 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 703
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 42.80 4.49 11 | 23.29 4.49 11
| 0.00 -4.08 0.21 4 |
281.3 | 0.00 48.40 4.49 11 | 16.53 4.49 11
| 0.00 -0.99 0.95 1 |
562.5 | 0.00 51.96 4.49 11 | 8.17 4.74 12
| 0.00 -1.95 0.21 4 |
843.8 | 0.00 53.25 4.49 11 | 1.81 4.74 12
| 0.00 -0.29 0.95 1 |
1125.0 | 0.00 52.14 4.49 11 | -7.94 4.49 11
| 0.00 -0.05 -0.95 2 |
1406.3 | 0.00 48.37 4.49 11 | -19.30 4.49 11
| 0.00 -0.40 -0.95 2 |
1687.5 | 0.00 41.71 4.49 11 | -28.86 4.49 11
| 0.00 -0.74 -0.95 2 |
1968.8 | 0.00 25.80 3.66 16 | -38.41 4.49 11
| 0.00 -1.09 -0.95 2 |
2250.0 | 0.00 17.46 4.74 12 | -49.77 4.49 11
| 0.00 -0.11 -0.05 8 |
2531.3 | 0.00 10.24 3.84 15 | -58.13 4.49 11
| 0.00 -5.76 1.72 22 |
2812.5 | 0.00 3.36 2.34 23 | -66.09 4.49 11
| 0.00 -18.24 3.35 14 |
3093.8 | 0.00 7.62 0.21 4 | -74.24 4.49 11
| 0.00 -35.35 3.35 14 |
3375.0 | 0.00 8.69 0.21 4 | -81.00 4.49 11
| 0.00 -54.59 4.49 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 360.16
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 288.17 351.92 281.58 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 5-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -68.03 MX = 4.49 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 703 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 704
============================================================================
B E A M N O. 480 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 35.83 2.24 11 | 25.95 2.24 11
| 0.00 -1.19 0.34 2 |
291.7 | 0.00 35.04 1.38 12 | 18.97 2.24 11
| 0.00 -0.14 0.08 3 |
583.3 | 0.00 46.70 2.24 11 | 10.78 2.24 11
| 0.00 -0.11 0.08 3 |
875.0 | 0.00 38.34 2.20 13 | 3.19 2.20 13
| 0.00 -0.47 0.34 2 |
1166.7 | 0.00 47.86 2.24 11 | -7.52 2.24 11
| 0.00 -0.04 0.08 3 |
1458.3 | 0.00 44.27 2.24 11 | -16.59 2.24 11
| 0.00 -0.01 -0.34 1 |
1750.0 | 0.00 37.52 2.24 11 | -28.48 2.24 11
| 0.00 -0.24 -0.34 1 |
2041.7 | 0.00 22.70 2.20 13 | -40.38 2.24 11
| 0.00 -0.48 -0.34 1 |
2333.3 | 0.00 12.57 2.20 13 | -49.44 2.24 11
| 0.00 -0.10 -0.08 4 |
2625.0 | 0.00 0.18 2.20 13 | -59.73 2.24 11
| 0.00 -1.21 2.24 11 |
2916.7 | 0.00 1.20 0.34 2 | -67.74 2.24 11
| 0.00 -19.76 2.24 11 |
3208.3 | 0.00 1.44 0.34 2 | -75.94 2.24 11
| 0.00 -40.70 2.24 11 |
3500.0 | 0.00 1.67 0.34 2 | -82.91 2.24 11
| 0.00 -63.86 2.24 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 398.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 224.41 238.92 234.39 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 4-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 704 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 705
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 542.0 mm AWAY FROM END SUPPORT
VY = -70.00 MX = 2.24 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 481 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 54.13 2.08 11 | -52.65 4.01 12
| 0.00 -0.64 1.96 1 |
122.9 | 0.00 46.02 2.08 11 | -68.71 2.08 11
| 0.00 -0.76 1.96 1 |
245.8 | 0.00 28.89 4.01 12 | -71.05 2.08 11
| 0.00 -0.88 1.96 1 |
368.8 | 0.00 28.37 2.08 11 | -75.35 2.08 11
| 0.00 -1.00 1.96 1 |
491.7 | 0.00 15.24 2.30 15 | -79.41 2.08 11
| 0.00 -0.10 -0.54 3 |
614.6 | 0.00 5.68 4.01 12 | -82.37 2.08 11
| 0.00 -1.24 1.96 1 |
737.5 | 0.00 0.14 0.54 4 | -86.36 2.08 11
| 0.00 -2.79 4.01 12 |
860.4 | 0.00 1.48 -1.96 2 | -90.04 2.08 11
| 0.00 -11.59 4.01 12 |
983.3 | 0.00 0.14 -0.12 8 | -93.00 2.08 11
| 0.00 -23.52 2.08 11 |
1106.3 | 0.00 1.73 -1.96 2 | -96.15 2.08 11
| 0.00 -35.17 2.08 11 |
1229.2 | 0.00 1.85 -1.96 2 | -98.91 2.08 11
| 0.00 -47.15 2.08 11 |
1352.1 | 0.00 1.97 -1.96 2 | -101.26 2.08 11
| 0.00 -59.46 2.08 11 |
1475.0 | 0.00 2.09 -1.96 2 | -103.49 2.08 11
| 0.00 -72.05 2.08 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 219.52 446.10
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 333.70 179.68 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 705 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 706
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -91.76 MX = 2.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 482 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.09 0.71 1 | 102.26 -2.91 11
| 0.00 -84.88 -2.91 11 |
122.9 | 0.00 0.20 0.03 7 | 99.36 -2.91 11
| 0.00 -72.49 -2.91 11 |
245.8 | 0.00 1.88 0.71 1 | 96.19 -2.91 11
| 0.00 -60.47 -2.91 11 |
368.8 | 0.00 1.77 0.71 1 | 93.05 -2.91 11
| 0.00 -48.83 -2.91 11 |
491.7 | 0.00 1.67 0.71 1 | 89.84 -2.91 11
| 0.00 -32.08 -3.18 13 |
614.6 | 0.00 1.57 0.71 1 | 86.06 -2.91 11
| 0.00 -21.62 -2.36 17 |
737.5 | 0.00 0.15 0.03 7 | 82.62 -2.91 11
| 0.00 -16.40 -2.91 11 |
860.4 | 0.00 1.36 0.71 1 | 79.19 -2.91 11
| 0.00 -6.47 -2.91 11 |
983.3 | 0.00 3.03 -2.91 11 | 75.40 -2.91 11
| 0.00 -0.14 -2.16 21 |
1106.3 | 0.00 12.10 -2.91 11 | 72.19 -2.91 11
| 0.00 -1.15 -0.71 2 |
1229.2 | 0.00 20.78 -2.91 11 | 69.06 -2.91 11
| 0.00 -1.04 -0.71 2 |
1352.1 | 0.00 29.07 -2.91 11 | 65.89 -2.91 11
| 0.00 -0.94 -0.71 2 |
1475.0 | 0.00 36.99 -2.91 11 | 62.99 -2.91 11
| 0.00 -0.83 -0.71 2 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 706 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 707
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 542.72 308.93 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 237.89
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 7-10í 4-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 666.4 mm AWAY FROM START SUPPORT
VY = 84.65 MX = -2.91 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 484 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 707 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 708
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.59 -0.40 1 | 45.00 7.04 11
| 0.00 -14.11 7.04 11 |
262.5 | 0.00 0.21 3.02 20 | 39.37 7.04 11
| 0.00 -3.03 7.04 11 |
525.0 | 0.00 5.03 5.68 17 | 31.99 7.04 11
| 0.00 -1.16 0.40 2 |
787.5 | 0.00 13.84 7.04 11 | 24.43 7.04 11
| 0.00 -0.94 0.40 2 |
1050.0 | 0.00 19.21 7.04 11 | 16.53 7.04 11
| 0.00 -0.07 0.19 3 |
1312.5 | 0.00 22.51 7.04 11 | 8.63 7.04 11
| 0.00 -0.51 0.40 2 |
1575.0 | 0.00 23.74 7.04 11 | 0.74 7.04 11
| 0.00 -0.29 0.40 2 |
1837.5 | 0.00 22.90 7.04 11 | -7.16 7.04 11
| 0.00 -0.07 0.40 2 |
2100.0 | 0.00 19.99 7.04 11 | -15.06 7.04 11
| 0.00 -0.15 -0.40 1 |
2362.5 | 0.00 15.01 7.04 11 | -22.52 7.04 11
| 0.00 -0.36 -0.40 1 |
2625.0 | 0.00 8.06 7.04 11 | -30.14 7.04 11
| 0.00 -0.58 -0.40 1 |
2887.5 | 0.00 0.42 6.12 13 | -36.28 7.04 11
| 0.00 -0.68 7.04 11 |
3150.0 | 0.00 1.02 0.40 2 | -41.23 7.04 11
| 0.00 -10.87 7.04 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 200.41 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 486 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 708 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 709
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 30.81 1.85 11 | -12.89 1.85 11
| 0.00 -0.53 0.77 1 |
158.3 | 0.00 22.70 1.57 16 | -17.17 1.85 11
| 0.00 -0.49 0.17 4 |
316.7 | 0.00 20.55 1.28 14 | -22.09 1.85 11
| 0.00 -0.10 0.77 1 |
475.0 | 0.00 21.41 1.85 11 | -26.47 1.85 11
| 0.00 -0.02 0.17 4 |
633.3 | 0.00 16.62 1.85 11 | -32.04 1.85 11
| 0.00 -0.33 -0.77 2 |
791.7 | 0.00 11.00 1.85 11 | -38.24 1.85 11
| 0.00 -0.55 -0.77 2 |
950.0 | 0.00 4.53 1.85 11 | -43.56 1.85 11
| 0.00 -0.76 -0.77 2 |
1108.3 | 0.00 0.98 0.77 1 | -48.56 1.85 11
| 0.00 -2.75 1.85 11 |
1266.7 | 0.00 1.19 0.77 1 | -53.82 1.85 11
| 0.00 -10.81 1.85 11 |
1425.0 | 0.00 1.41 0.77 1 | -57.02 1.85 11
| 0.00 -19.57 1.85 11 |
1583.3 | 0.00 1.62 0.77 1 | -60.88 1.85 11
| 0.00 -28.98 1.85 11 |
1741.7 | 0.00 1.84 0.77 1 | -64.49 1.85 11
| 0.00 -38.94 1.85 11 |
1900.0 | 0.00 2.05 0.77 1 | -67.33 1.85 11
| 0.00 -49.38 1.85 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 301.65
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 191.74 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -53.18 MX = 1.85 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 709 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 710
============================================================================
B E A M N O. 487 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 63.85 -0.40 11 | -1.84 -0.56 13
| 0.00 -0.74 0.20 1 |
158.3 | 0.00 50.79 -0.42 14 | -4.85 -0.56 13
| 0.00 -0.57 0.20 1 |
316.7 | 0.00 62.40 -0.40 11 | -8.20 -0.56 13
| 0.00 -0.41 0.20 1 |
475.0 | 0.00 60.71 -0.40 11 | -12.83 -0.40 11
| 0.00 -0.05 0.09 4 |
633.3 | 0.00 58.33 -0.40 11 | -17.09 -0.40 11
| 0.00 -0.06 0.09 4 |
791.7 | 0.00 55.22 -0.40 11 | -22.30 -0.40 11
| 0.00 -0.09 -0.20 2 |
950.0 | 0.00 51.35 -0.40 11 | -26.94 -0.40 11
| 0.00 -0.25 -0.20 2 |
1108.3 | 0.00 46.69 -0.40 11 | -31.59 -0.40 11
| 0.00 -0.42 -0.20 2 |
1266.7 | 0.00 41.27 -0.40 11 | -36.80 -0.40 11
| 0.00 -0.58 -0.20 2 |
1425.0 | 0.00 35.12 -0.40 11 | -41.06 -0.40 11
| 0.00 -0.75 -0.20 2 |
1583.3 | 0.00 28.28 -0.40 11 | -45.19 -0.40 11
| 0.00 -0.91 -0.20 2 |
1741.7 | 0.00 20.78 -0.40 11 | -49.39 -0.40 11
| 0.00 -1.08 -0.20 2 |
1900.0 | 0.00 12.66 -0.40 11 | -53.14 -0.40 11
| 0.00 -1.24 -0.20 2 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 375.81 356.33 299.05 202.44 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 5-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 710 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 711
============================================================================
B E A M N O. 488 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.21 -3.80 2 | -95.10 -18.46 13
| 0.00 -10.22 -17.38 11 |
27.1 | 0.00 0.84 -3.80 2 | -95.27 -18.46 13
| 0.00 -12.90 -17.38 11 |
54.2 | 0.00 0.47 -3.80 2 | -95.36 -18.46 13
| 0.00 -15.57 -17.38 11 |
81.3 | 0.00 0.11 -3.80 2 | -95.52 -18.46 13
| 0.00 -14.62 -15.67 14 |
108.3 | 0.00 0.26 3.80 1 | -95.67 -18.46 13
| 0.00 -20.94 -17.38 11 |
135.4 | 0.00 0.63 3.80 1 | -95.76 -18.46 13
| 0.00 -19.66 -18.46 13 |
162.5 | 0.00 0.37 1.47 4 | -95.90 -18.46 13
| 0.00 -26.32 -17.38 11 |
189.6 | 0.00 1.36 3.80 1 | -96.03 -18.46 13
| 0.00 -29.02 -17.38 11 |
216.7 | 0.00 1.73 3.80 1 | -96.12 -18.46 13
| 0.00 -27.45 -18.46 13 |
243.8 | 0.00 2.10 3.80 1 | -96.23 -18.46 13
| 0.00 -34.42 -17.38 11 |
270.8 | 0.00 2.47 3.80 1 | -96.34 -18.46 13
| 0.00 -37.13 -17.38 11 |
297.9 | 0.00 2.83 3.80 1 | -96.42 -18.46 13
| 0.00 -39.84 -17.38 11 |
325.0 | 0.00 3.20 3.80 1 | -96.51 -18.46 13
| 0.00 -42.56 -17.38 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 221.09 230.41 317.78 367.74 418.83
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 110 mm c/c @ 110 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 711 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 712
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT669.0 mm AWAY FROM START SUPPORT
VY = 43.06 MX = -18.46 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 490 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 21.30 0.08 1 | 55.15 -1.50 13
| 0.00 -58.16 -1.50 13 |
264.6 | 0.00 1.64 0.00 7 | 51.52 -1.50 13
| 0.00 -42.40 -1.01 21 |
529.2 | 0.00 14.58 0.08 1 | 47.03 -1.50 13
| 0.00 -31.44 -1.01 21 |
793.8 | 0.00 12.39 -0.79 20 | 42.66 -1.50 13
| 0.00 -21.27 -1.01 21 |
1058.3 | 0.00 11.61 -0.79 20 | 36.70 -1.50 13
| 0.00 -11.96 -1.01 21 |
1322.9 | 0.00 7.26 -1.77 11 | 31.60 -1.50 13
| 0.00 -3.57 -1.01 21 |
1587.5 | 0.00 10.60 -1.32 12 | 25.06 -1.50 13
| 0.00 -1.14 -0.08 2 |
1852.1 | 0.00 11.70 -2.01 14 | 22.38 -1.01 21
| 0.00 -2.22 0.08 1 |
2116.7 | 0.00 17.88 -1.50 13 | 19.11 -1.01 21
| 0.00 -5.59 0.08 1 |
2381.2 | 0.00 20.62 -1.50 13 | -23.03 -1.32 12
| 0.00 -8.95 0.08 1 |
2645.8 | 0.00 24.08 -1.01 21 | -27.40 -1.32 12
| 0.00 -12.85 -0.79 20 |
2910.4 | 0.00 26.99 -1.01 21 | -31.89 -1.32 12
| 0.00 -20.02 -0.79 20 |
3175.0 | 0.00 29.15 -1.01 21 | -35.52 -1.32 12
| 0.00 -27.95 -0.79 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 351.82 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 712 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 713
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -25.09 MX = -1.32 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 492 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 8.87 -0.06 3 | 43.03 -0.56 11
| 0.00 -23.19 -0.38 15 |
245.8 | 0.00 9.07 -0.35 22 | 37.15 -0.56 11
| 0.00 -13.87 -0.38 15 |
491.7 | 0.00 11.53 -0.35 22 | 30.20 -0.56 11
| 0.00 -7.87 -0.17 23 |
737.5 | 0.00 13.60 -0.52 14 | 23.40 -0.56 11
| 0.00 -5.26 0.06 4 |
983.3 | 0.00 16.03 -0.52 14 | 18.89 -0.38 15
| 0.00 -4.06 0.06 4 |
1229.2 | 0.00 16.90 -0.52 14 | 11.37 -0.38 15
| 0.00 -2.86 0.06 4 |
1475.0 | 0.00 17.61 -0.56 11 | -8.41 -0.35 22
| 0.00 -1.66 0.06 4 |
1720.8 | 0.00 13.54 -0.68 13 | -13.19 -0.52 14
| 0.00 -0.43 0.19 1 |
1966.7 | 0.00 12.83 -0.56 11 | -20.71 -0.52 14
| 0.00 -0.26 0.19 1 |
2212.5 | 0.00 8.27 -0.38 15 | -26.39 -0.52 14
| 0.00 -1.94 -0.06 3 |
2458.3 | 0.00 4.39 -0.17 23 | -32.46 -0.56 11
| 0.00 -5.02 -0.35 22 |
2704.2 | 0.00 4.34 0.06 4 | -39.42 -0.56 11
| 0.00 -12.10 -0.52 14 |
2950.0 | 0.00 5.54 0.06 4 | -45.30 -0.56 11
| 0.00 -21.88 -0.52 14 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 713 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 714
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 29.11 MX = -0.56 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -31.10 MX = -0.56 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 493 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 275.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 714 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 715
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.02 42.24 12 | -171.35 51.48 11
| 0.00 -1.25 51.48 11 |
22.9 | 0.00 0.68 0.88 1 | -171.53 51.48 11
| 0.00 -5.17 51.48 11 |
45.8 | 0.00 0.52 0.88 1 | -171.62 51.48 11
| 0.00 -9.11 51.48 11 |
68.8 | 0.00 0.35 0.88 1 | -171.78 51.48 11
| 0.00 -13.04 51.48 11 |
91.7 | 0.00 0.00 -0.00 10 | -171.93 51.48 11
| 0.00 -16.98 51.48 11 |
114.6 | 0.00 0.02 0.88 1 | -172.02 51.48 11
| 0.00 -20.92 51.48 11 |
137.5 | 0.00 0.15 -0.88 2 | -172.16 51.48 11
| 0.00 -24.86 51.48 11 |
160.4 | 0.00 0.32 -0.88 2 | -172.29 51.48 11
| 0.00 -28.81 51.48 11 |
183.3 | 0.00 0.48 -0.88 2 | -172.38 51.48 11
| 0.00 -32.76 51.48 11 |
206.2 | 0.00 0.65 -0.88 2 | -172.50 51.48 11
| 0.00 -36.71 51.48 11 |
229.2 | 0.00 0.82 -0.88 2 | -172.60 51.48 11
| 0.00 -40.67 51.48 11 |
252.1 | 0.00 0.98 -0.88 2 | -172.69 51.48 11
| 0.00 -44.62 51.48 11 |
275.0 | 0.00 1.15 -0.88 2 | -172.79 51.48 11
| 0.00 -48.58 51.48 11 |
============================================================================
============================================================================
B E A M N O. 494 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.57 -0.00 4 | -108.08 9.77 11
| 0.00 -3.36 9.77 11 |
37.5 | 0.00 0.48 -0.00 4 | -108.44 9.77 11
| 0.00 -7.41 9.77 11 |
75.0 | 0.00 0.39 -0.00 4 | -108.61 9.77 11
| 0.00 -11.48 9.77 11 |
112.5 | 0.00 0.31 -0.00 4 | -108.98 9.77 11
| 0.00 -15.56 9.77 11 |
150.0 | 0.00 0.22 -0.00 4 | -109.36 9.77 11
| 0.00 -19.66 9.77 11 |
187.5 | 0.00 0.13 -0.00 4 | -109.51 9.77 11
| 0.00 -23.76 9.77 11 |
225.0 | 0.00 0.04 -0.00 4 | -109.89 9.77 11
| 0.00 -22.35 7.82 14 |
262.5 | 0.00 0.00 -0.00 8 | -110.26 9.77 11
| 0.00 -32.00 9.77 11 |
300.0 | 0.00 0.14 0.00 3 | -110.41 9.77 11
| 0.00 -36.14 9.77 11 |
337.5 | 0.00 0.23 0.00 3 | -110.79 9.77 11
| 0.00 -40.29 9.77 11 |
375.0 | 0.00 0.31 0.00 3 | -111.17 9.77 11
| 0.00 -44.45 9.77 11 |
412.5 | 0.00 0.40 0.00 3 | -111.32 9.77 11
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 715 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 716
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.88 199.76 326.53 404.33
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 145 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 29.78 MX = 9.77 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 495 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 716 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 717
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.05 0.33 2 | 53.36 -1.69 11
| 0.00 -30.78 -1.69 11 |
250.0 | 0.00 0.04 0.33 2 | 47.28 -1.69 11
| 0.00 -18.11 -1.69 11 |
500.0 | 0.00 0.02 0.15 3 | 41.37 -1.69 11
| 0.00 -5.67 -1.74 12 |
750.0 | 0.00 1.75 -1.39 16 | 31.91 -1.69 11
| 0.00 -0.02 -0.15 4 |
1000.0 | 0.00 9.27 -1.69 11 | 24.21 -1.69 11
| 0.00 -0.00 -0.03 7 |
1250.0 | 0.00 11.15 -1.74 12 | 13.56 -1.69 11
| 0.00 -0.01 -0.33 1 |
1500.0 | 0.00 16.00 -1.69 11 | 3.90 -1.69 11
| 0.00 -0.00 0.33 2 |
1750.0 | 0.00 15.27 -1.69 11 | -8.09 -1.69 11
| 0.00 -0.01 0.33 2 |
2000.0 | 0.00 12.02 -1.69 11 | -16.65 -1.69 11
| 0.00 -0.02 0.33 2 |
2250.0 | 0.00 6.47 -1.69 11 | -27.55 -1.69 11
| 0.00 -0.03 0.33 2 |
2500.0 | 0.00 0.04 -0.33 1 | -34.04 -1.69 11
| 0.00 -1.12 -1.69 11 |
2750.0 | 0.00 0.05 -0.33 1 | -40.60 -1.69 11
| 0.00 -10.41 -1.69 11 |
3000.0 | 0.00 0.05 -0.33 1 | -45.44 -1.69 11
| 0.00 -21.16 -1.69 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 189.99 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -29.71 MX = -1.69 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 717 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 718
============================================================================
B E A M N O. 496 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3350.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 5.02 -0.00 3 | 45.92 -0.02 11
| 0.00 -21.07 -0.01 15 |
279.2 | 0.00 3.88 -0.00 3 | 39.24 -0.02 11
| 0.00 -10.18 -0.01 15 |
558.3 | 0.00 5.63 -0.02 14 | 31.32 -0.02 11
| 0.00 -2.94 -0.02 23 |
837.5 | 0.00 10.61 -0.02 11 | 20.38 -0.65 12
| 0.00 -0.06 -0.05 7 |
1116.7 | 0.00 15.89 -0.02 11 | 12.34 -0.65 12
| 0.00 -0.37 -0.53 1 |
1395.8 | 0.00 14.84 0.62 13 | 4.46 -0.82 20
| 0.00 -0.01 -0.05 7 |
1675.0 | 0.00 18.38 -0.02 11 | -6.08 0.62 13
| 0.00 -1.85 -0.00 3 |
1954.2 | 0.00 15.33 -0.02 11 | -14.41 0.62 13
| 0.00 -3.00 -0.00 3 |
2233.3 | 0.00 12.59 -0.01 15 | -21.46 0.62 13
| 0.00 -4.15 -0.00 3 |
2512.5 | 0.00 8.76 -0.02 23 | -34.98 -0.02 11
| 0.00 -7.12 -0.03 22 |
2791.7 | 0.00 6.44 0.00 4 | -42.72 -0.02 11
| 0.00 -15.56 -0.02 14 |
3070.8 | 0.00 7.58 0.00 4 | -50.65 -0.02 11
| 0.00 -27.37 -0.02 14 |
3350.0 | 0.00 8.73 0.00 4 | -57.33 -0.02 11
| 0.00 -40.80 -0.02 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 232.22
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 718 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 719
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 31.83 MX = -0.02 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -39.70 MX = -0.02 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 497 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.10 18.35 20 | -116.32 22.51 11
| 0.00 -3.10 22.51 11 |
18.8 | 0.00 0.33 2.06 4 | -116.44 22.51 11
| 0.00 -5.28 22.51 11 |
37.5 | 0.00 0.26 2.06 4 | -116.52 22.51 11
| 0.00 -7.47 22.51 11 |
56.3 | 0.00 0.31 4.37 1 | -116.64 22.51 11
| 0.00 -7.35 23.25 12 |
75.0 | 0.00 0.19 4.37 1 | -116.75 22.51 11
| 0.00 -11.84 22.51 11 |
93.8 | 0.00 0.08 4.37 1 | -116.83 22.51 11
| 0.00 -14.03 22.51 11 |
112.5 | 0.00 0.04 -4.37 2 | -116.94 22.51 11
| 0.00 -13.02 23.25 12 |
131.3 | 0.00 0.11 -2.06 3 | -117.03 22.51 11
| 0.00 -14.91 23.25 12 |
150.0 | 0.00 0.27 -4.37 2 | -117.11 22.51 11
| 0.00 -20.61 22.51 11 |
168.8 | 0.00 0.38 -4.37 2 | -117.20 22.51 11
| 0.00 -22.81 22.51 11 |
187.5 | 0.00 0.50 -4.37 2 | -117.29 22.51 11
| 0.00 -25.01 22.51 11 |
206.3 | 0.00 0.61 -4.37 2 | -117.36 22.51 11
| 0.00 -27.21 22.51 11 |
225.0 | 0.00 0.73 -4.37 2 | -117.44 22.51 11
| 0.00 -29.41 22.51 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 230.07 262.87 297.25 349.94 391.26
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 373.85 216.38 183.21 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 719 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 720
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 3-10í 4-10í 4-10í 5-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 80 mm c/c @ 130 mm c/c @ 130 mm c/c @ 85 mm c/c @ 85 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 1704.98 MX = 22.51 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 498 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.51 0.27 1 | 70.71 -0.96 11
| 0.00 -58.81 -0.96 11 |
268.8 | 0.00 6.20 0.27 1 | 65.72 -0.96 11
| 0.00 -39.84 -1.09 13 |
537.5 | 0.00 4.90 0.27 1 | 58.18 -0.96 11
| 0.00 -23.82 -0.96 11 |
806.2 | 0.00 1.01 -0.11 20 | 51.19 -0.96 11
| 0.00 -11.60 -1.09 13 |
1075.0 | 0.00 3.27 -0.96 11 | 41.67 -0.96 11
| 0.00 -2.23 -0.91 21 |
1343.8 | 0.00 13.00 -0.96 11 | 30.35 -1.09 13
| 0.00 -0.99 -0.27 2 |
1612.5 | 0.00 16.07 -1.09 13 | 20.91 -1.09 13
| 0.00 -0.03 0.04 4 |
1881.3 | 0.00 23.14 -0.96 11 | 12.74 -1.09 13
| 0.00 -0.12 0.04 4 |
2150.0 | 0.00 23.68 -0.96 11 | -9.39 -0.45 12
| 0.00 -2.93 0.27 1 |
2418.8 | 0.00 22.33 -1.09 13 | -15.55 -0.45 12
| 0.00 -4.23 0.27 1 |
2687.5 | 0.00 20.47 -1.09 13 | -19.13 -0.96 11
| 0.00 -5.54 0.27 1 |
2956.2 | 0.00 17.06 -1.09 13 | -26.47 -0.96 11
| 0.00 -6.84 0.27 1 |
3225.0 | 0.00 14.39 -0.91 21 | -31.29 -0.96 11
| 0.00 -10.04 -0.11 20 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 720 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 721
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 350.30 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 56.19 MX = -0.96 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -19.06 MX = -0.96 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 499 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3300.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 721 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 722
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.87 -0.48 1 | 119.81 -1.50 11
| 0.00 -131.98 -1.50 11 |
275.0 | 0.00 1.58 -0.48 1 | 113.93 -1.50 11
| 0.00 -99.77 -1.50 11 |
550.0 | 0.00 1.29 -0.48 1 | 107.04 -1.50 11
| 0.00 -56.70 -1.08 14 |
825.0 | 0.00 1.00 -0.48 1 | 98.55 -1.50 11
| 0.00 -41.06 -1.50 11 |
1100.0 | 0.00 0.70 -0.48 1 | 88.84 -1.50 11
| 0.00 -15.26 -1.50 11 |
1375.0 | 0.00 7.59 -1.50 11 | 77.74 -1.50 11
| 0.00 -0.40 0.10 3 |
1650.0 | 0.00 27.24 -1.50 11 | 65.36 -1.50 11
| 0.00 -0.20 0.10 3 |
1925.0 | 0.00 43.54 -1.50 11 | 53.19 -1.50 11
| 0.00 -0.17 -0.48 1 |
2200.0 | 0.00 56.77 -1.50 11 | 44.16 -1.50 11
| 0.00 -0.46 -0.48 1 |
2475.0 | 0.00 67.16 -1.50 11 | 32.74 -1.50 11
| 0.00 -0.75 -0.48 1 |
2750.0 | 0.00 75.20 -1.50 11 | 25.77 -1.50 11
| 0.00 -1.04 -0.48 1 |
3025.0 | 0.00 81.26 -1.50 11 | 18.46 -1.50 11
| 0.00 -1.33 -0.48 1 |
3300.0 | 0.00 85.66 -1.50 11 | 13.56 -1.50 11
| 0.00 -1.62 -0.48 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 874.37 248.83 178.50 178.50 178.07
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 407.83 532.35
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 8-12í 3-12í 3-12í 3-12í 3-12í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 6-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 537.2 mm AWAY FROM START SUPPORT
VY = 107.35 MX = -1.50 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 722 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 723
============================================================================
B E A M N O. 500 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.30 -0.00 1 | 44.82 0.30 11
| 0.00 -10.04 0.25 13 |
291.7 | 0.00 4.41 0.24 12 | 37.72 0.30 11
| 0.00 -1.71 0.00 2 |
583.3 | 0.00 12.79 0.30 11 | 29.54 0.30 11
| 0.00 -0.61 0.39 4 |
875.0 | 0.00 20.21 0.30 11 | 21.12 0.30 11
| 0.00 -0.64 0.39 4 |
1166.7 | 0.00 20.13 0.24 18 | 12.49 0.30 11
| 0.00 -0.67 0.39 4 |
1458.3 | 0.00 22.06 0.25 17 | 2.95 0.71 15
| 0.00 -0.70 0.39 4 |
1750.0 | 0.00 27.36 0.30 11 | -3.96 0.71 15
| 0.00 -1.27 -0.00 1 |
2041.7 | 0.00 22.00 0.25 13 | -10.86 0.71 15
| 0.00 -1.87 -0.00 1 |
2333.3 | 0.00 19.53 0.30 11 | -22.05 0.30 11
| 0.00 -2.46 -0.00 1 |
2625.0 | 0.00 13.14 0.25 13 | -30.68 0.30 11
| 0.00 -3.06 -0.00 1 |
2916.7 | 0.00 6.67 0.07 21 | -39.10 0.30 11
| 0.00 -4.29 0.06 20 |
3208.3 | 0.00 4.25 0.00 2 | -47.28 0.30 11
| 0.00 -13.89 0.24 12 |
3500.0 | 0.00 4.84 0.00 2 | -54.38 0.30 11
| 0.00 -26.47 0.24 12 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 723 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 724
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 30.79 MX = 0.30 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -41.23 MX = 0.30 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 501 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 41.08 -7.84 11 | 36.82 -7.84 11
| 0.00 -0.76 0.18 1 |
158.3 | 0.00 38.09 -6.49 13 | 31.88 -7.84 11
| 0.00 -0.72 0.18 1 |
316.7 | 0.00 51.20 -7.84 11 | 27.05 -7.84 11
| 0.00 -0.69 0.18 1 |
475.0 | 0.00 55.04 -7.84 11 | 20.82 -7.84 11
| 0.00 -0.65 0.18 1 |
633.3 | 0.00 47.16 -6.49 13 | 17.20 -7.84 11
| 0.00 -0.44 0.05 4 |
791.7 | 0.00 48.80 -6.49 13 | 10.97 -7.84 11
| 0.00 -0.57 0.18 1 |
950.0 | 0.00 61.45 -7.84 11 | 6.49 -7.84 11
| 0.00 -0.54 0.18 1 |
1108.3 | 0.00 50.09 -6.49 13 | 0.54 -7.84 11
| 0.00 -0.05 0.00 7 |
1266.7 | 0.00 49.23 -6.33 14 | -5.47 -7.84 11
| 0.00 -0.46 0.18 1 |
1425.0 | 0.00 60.23 -7.84 11 | -11.54 -7.84 11
| 0.00 -0.42 0.18 1 |
1583.3 | 0.00 58.20 -7.84 11 | -14.17 -7.84 11
| 0.00 -0.39 0.18 1 |
1741.7 | 0.00 55.18 -7.84 11 | -21.10 -7.84 11
| 0.00 -0.35 0.18 1 |
1900.0 | 0.00 51.43 -7.84 11 | -26.13 -7.84 11
| 0.00 -0.31 0.18 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 311.97 398.44 439.07 431.30 375.80
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 724 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 725
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 4-12í 4-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 502 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3375.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 43.56 4.49 11 | 22.85 4.49 11
| 0.00 -3.22 0.18 4 |
281.3 | 0.00 42.09 3.38 14 | 16.10 4.49 11
| 0.00 -0.87 0.86 1 |
562.5 | 0.00 52.47 4.49 11 | 7.65 4.62 12
| 0.00 -0.57 0.86 1 |
843.8 | 0.00 53.64 4.49 11 | 1.28 4.62 12
| 0.00 -0.70 0.18 4 |
1125.0 | 0.00 52.41 4.49 11 | -8.37 4.49 11
| 0.00 -0.04 -0.86 2 |
1406.3 | 0.00 39.22 4.62 12 | -19.73 4.49 11
| 0.00 0.00 0.00 1 |
1687.5 | 0.00 41.73 4.49 11 | -29.29 4.49 11
| 0.00 -0.05 -0.04 8 |
1968.8 | 0.00 25.70 3.63 16 | -38.85 4.49 11
| 0.00 -2.66 -0.18 3 |
2250.0 | 0.00 19.77 3.80 15 | -50.21 4.49 11
| 0.00 -3.50 -0.18 3 |
2531.3 | 0.00 8.59 3.80 15 | -58.57 4.49 11
| 0.00 -1.84 3.38 14 |
2812.5 | 0.00 5.19 0.18 4 | -66.52 4.49 11
| 0.00 -16.97 3.38 14 |
3093.8 | 0.00 6.03 0.18 4 | -74.68 4.49 11
| 0.00 -33.35 4.49 11 |
3375.0 | 0.00 6.87 0.18 4 | -81.43 4.49 11
| 0.00 -55.30 4.49 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 364.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 292.68 354.25 281.64 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 725 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 726
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 5-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -68.46 MX = 4.49 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 503 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 37.17 2.25 11 | 24.76 2.25 11
| 0.00 -1.19 0.34 2 |
291.7 | 0.00 43.38 2.25 11 | 17.79 2.25 11
| 0.00 -0.95 0.34 2 |
583.3 | 0.00 38.74 1.39 12 | 9.60 2.25 11
| 0.00 -0.08 0.04 8 |
875.0 | 0.00 48.94 2.25 11 | 2.25 2.21 13
| 0.00 -0.48 0.34 2 |
1166.7 | 0.00 47.82 2.25 11 | -8.71 2.25 11
| 0.00 -0.24 0.34 2 |
1458.3 | 0.00 35.11 1.89 14 | -17.77 2.25 11
| 0.00 -0.00 -0.04 7 |
1750.0 | 0.00 36.79 2.25 11 | -29.67 2.25 11
| 0.00 -0.24 -0.34 1 |
2041.7 | 0.00 21.85 2.21 13 | -41.56 2.25 11
| 0.00 -0.48 -0.34 1 |
2333.3 | 0.00 10.74 1.89 14 | -50.62 2.25 11
| 0.00 -0.72 -0.34 1 |
2625.0 | 0.00 0.96 0.34 2 | -60.91 2.25 11
| 0.00 -2.97 2.25 11 |
2916.7 | 0.00 1.20 0.34 2 | -68.93 2.25 11
| 0.00 -21.87 2.25 11 |
3208.3 | 0.00 1.44 0.34 2 | -77.12 2.25 11
| 0.00 -43.15 2.25 11 |
3500.0 | 0.00 1.68 0.34 2 | -84.09 2.25 11
| 0.00 -66.66 2.25 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 726 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 727
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 413.56
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 232.45 302.91 230.18 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 4-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -71.19 MX = 2.25 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 504 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 727 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 728
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 55.77 1.71 11 | -63.14 1.71 11
| 0.00 -0.65 1.75 1 |
122.9 | 0.00 47.80 1.71 11 | -67.51 1.71 11
| 0.00 -0.76 1.75 1 |
245.8 | 0.00 39.37 1.71 11 | -69.85 1.71 11
| 0.00 -0.88 1.75 1 |
368.8 | 0.00 30.46 1.71 11 | -74.15 1.71 11
| 0.00 -0.99 1.75 1 |
491.7 | 0.00 21.14 1.71 11 | -78.21 1.71 11
| 0.00 -1.10 1.75 1 |
614.6 | 0.00 11.34 1.71 11 | -81.17 1.71 11
| 0.00 -1.22 1.75 1 |
737.5 | 0.00 2.30 -1.89 21 | -85.16 1.71 11
| 0.00 -1.68 3.37 20 |
860.4 | 0.00 1.44 -1.75 2 | -88.84 1.71 11
| 0.00 -9.40 3.48 12 |
983.3 | 0.00 1.55 -1.75 2 | -91.80 1.71 11
| 0.00 -18.42 3.48 12 |
1106.3 | 0.00 1.67 -1.75 2 | -94.94 1.71 11
| 0.00 -32.20 1.71 11 |
1229.2 | 0.00 1.78 -1.75 2 | -97.71 1.71 11
| 0.00 -44.03 1.71 11 |
1352.1 | 0.00 1.89 -1.75 2 | -100.05 1.71 11
| 0.00 -56.19 1.71 11 |
1475.0 | 0.00 2.01 -1.75 2 | -102.28 1.71 11
| 0.00 -68.64 1.71 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 198.52 420.53
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 339.20 187.86 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -90.56 MX = 1.71 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 728 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 729
============================================================================
B E A M N O. 505 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.04 0.58 1 | 100.75 -2.72 11
| 0.00 -81.03 -2.72 11 |
122.9 | 0.00 1.94 0.58 1 | 97.84 -2.72 11
| 0.00 -68.82 -2.72 11 |
245.8 | 0.00 1.84 0.58 1 | 94.67 -2.72 11
| 0.00 -45.82 -2.23 14 |
368.8 | 0.00 1.74 0.58 1 | 91.54 -2.72 11
| 0.00 -45.54 -2.72 11 |
491.7 | 0.00 1.64 0.58 1 | 88.33 -2.72 11
| 0.00 -34.49 -2.72 11 |
614.6 | 0.00 0.17 0.01 7 | 84.55 -2.72 11
| 0.00 -23.86 -2.72 11 |
737.5 | 0.00 1.45 0.58 1 | 81.11 -2.72 11
| 0.00 -13.67 -2.72 11 |
860.4 | 0.00 1.35 0.58 1 | 77.67 -2.72 11
| 0.00 -4.75 -2.87 13 |
983.3 | 0.00 4.48 -2.16 16 | 73.89 -2.72 11
| 0.00 -0.18 -0.04 3 |
1106.3 | 0.00 14.28 -2.72 11 | 70.68 -2.72 11
| 0.00 -1.15 -0.58 2 |
1229.2 | 0.00 22.77 -2.72 11 | 67.55 -2.72 11
| 0.00 -1.05 -0.58 2 |
1352.1 | 0.00 30.88 -2.72 11 | 64.38 -2.72 11
| 0.00 -0.95 -0.58 2 |
1475.0 | 0.00 38.61 -2.72 11 | 61.48 -2.72 11
| 0.00 -0.85 -0.58 2 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 514.90 287.01 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 245.56
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 7-10í 4-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 729 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 730
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 666.4 mm AWAY FROM START SUPPORT
VY = 83.14 MX = -2.72 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 507 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.41 -0.39 1 | 44.92 7.11 11
| 0.00 -13.62 7.11 11 |
262.5 | 0.00 1.21 -0.39 1 | 39.30 7.11 11
| 0.00 -2.55 7.11 11 |
525.0 | 0.00 6.85 7.11 11 | 31.91 7.11 11
| 0.00 -0.07 0.19 3 |
787.5 | 0.00 11.35 5.91 14 | 24.35 7.11 11
| 0.00 -0.83 0.39 2 |
1050.0 | 0.00 15.65 5.91 14 | 16.45 7.11 11
| 0.00 -0.64 0.39 2 |
1312.5 | 0.00 22.91 7.11 11 | 8.56 7.11 11
| 0.00 -0.45 0.39 2 |
1575.0 | 0.00 24.12 7.11 11 | 0.66 7.11 11
| 0.00 -0.26 0.39 2 |
1837.5 | 0.00 23.26 7.11 11 | -7.24 7.11 11
| 0.00 -0.06 0.39 2 |
2100.0 | 0.00 20.32 7.11 11 | -15.13 7.11 11
| 0.00 -0.00 -0.19 4 |
2362.5 | 0.00 15.33 7.11 11 | -22.59 7.11 11
| 0.00 -0.32 -0.39 1 |
2625.0 | 0.00 8.35 7.11 11 | -30.22 7.11 11
| 0.00 -0.51 -0.39 1 |
2887.5 | 0.00 0.52 6.16 13 | -36.35 7.11 11
| 0.00 -0.40 7.11 11 |
3150.0 | 0.00 0.90 0.39 2 | -41.30 7.11 11
| 0.00 -10.62 7.11 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 203.30 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 730 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 731
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 509 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 33.10 1.62 11 | -15.85 1.62 11
| 0.00 -0.55 0.75 1 |
158.3 | 0.00 23.80 2.19 12 | -20.13 1.62 11
| 0.00 -0.33 0.75 1 |
316.7 | 0.00 26.67 1.62 11 | -25.05 1.62 11
| 0.00 -0.12 0.75 1 |
475.0 | 0.00 17.96 2.19 12 | -29.43 1.62 11
| 0.00 -0.10 -0.75 2 |
633.3 | 0.00 17.04 1.62 11 | -35.00 1.62 11
| 0.00 -0.02 -0.07 8 |
791.7 | 0.00 9.28 1.49 15 | -41.20 1.62 11
| 0.00 -0.52 -0.75 2 |
950.0 | 0.00 4.10 2.19 12 | -46.52 1.62 11
| 0.00 -0.74 -0.75 2 |
1108.3 | 0.00 0.08 0.07 7 | -51.52 1.62 11
| 0.00 -3.73 1.62 11 |
1266.7 | 0.00 1.16 0.75 1 | -56.78 1.62 11
| 0.00 -12.25 1.62 11 |
1425.0 | 0.00 1.38 0.75 1 | -59.97 1.62 11
| 0.00 -21.49 1.62 11 |
1583.3 | 0.00 1.59 0.75 1 | -63.84 1.62 11
| 0.00 -31.36 1.62 11 |
1741.7 | 0.00 1.81 0.75 1 | -67.44 1.62 11
| 0.00 -41.79 1.62 11 |
1900.0 | 0.00 2.02 0.75 1 | -70.29 1.62 11
| 0.00 -52.70 1.62 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 320.31
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 202.91 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 731 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 732
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -56.14 MX = 1.62 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 510 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 63.88 -0.09 11 | 2.95 0.22 20
| 0.00 -0.72 0.20 1 |
158.3 | 0.00 63.66 -0.09 11 | -3.85 -0.32 13
| 0.00 -0.05 0.08 4 |
316.7 | 0.00 62.81 -0.09 11 | -7.21 -0.32 13
| 0.00 -0.04 0.03 7 |
475.0 | 0.00 61.30 -0.09 11 | -10.51 -0.32 13
| 0.00 -0.08 0.08 4 |
633.3 | 0.00 59.11 -0.09 11 | -15.91 -0.09 11
| 0.00 -0.08 0.20 1 |
791.7 | 0.00 56.19 -0.09 11 | -21.12 -0.09 11
| 0.00 -0.07 -0.20 2 |
950.0 | 0.00 52.50 -0.09 11 | -25.76 -0.09 11
| 0.00 -0.12 0.08 4 |
1108.3 | 0.00 38.58 -0.17 14 | -30.40 -0.09 11
| 0.00 -0.39 -0.20 2 |
1266.7 | 0.00 42.80 -0.09 11 | -35.61 -0.09 11
| 0.00 -0.14 0.08 4 |
1425.0 | 0.00 36.83 -0.09 11 | -39.88 -0.09 11
| 0.00 -0.71 -0.20 2 |
1583.3 | 0.00 30.18 -0.09 11 | -44.01 -0.09 11
| 0.00 -0.86 -0.20 2 |
1741.7 | 0.00 22.87 -0.09 11 | -48.21 -0.09 11
| 0.00 -1.02 -0.20 2 |
1900.0 | 0.00 14.94 -0.09 11 | -51.96 -0.09 11
| 0.00 -1.18 -0.20 2 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 732 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 733
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 372.87 356.88 303.00 209.55 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 5-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 511 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.53 -3.72 2 | -119.44 -21.00 11
| 0.00 -10.90 -21.00 11 |
27.1 | 0.00 0.32 -3.72 2 | -119.66 -21.00 11
| 0.00 -10.93 -21.27 13 |
54.2 | 0.00 0.01 -1.43 3 | -119.77 -21.00 11
| 0.00 -17.38 -21.00 11 |
81.3 | 0.00 0.07 1.43 4 | -119.97 -21.00 11
| 0.00 -16.63 -21.27 13 |
108.3 | 0.00 0.32 3.72 1 | -120.16 -21.00 11
| 0.00 -23.88 -21.00 11 |
135.4 | 0.00 0.53 3.72 1 | -120.27 -21.00 11
| 0.00 -22.35 -21.27 13 |
162.5 | 0.00 0.02 0.10 10 | -120.44 -21.00 11
| 0.00 -24.69 -18.51 14 |
189.6 | 0.00 0.96 3.72 1 | -120.60 -21.00 11
| 0.00 -28.08 -21.27 13 |
216.7 | 0.00 1.18 3.72 1 | -120.71 -21.00 11
| 0.00 -30.95 -21.27 13 |
243.8 | 0.00 1.39 3.72 1 | -120.86 -21.00 11
| 0.00 -40.20 -21.00 11 |
270.8 | 0.00 1.60 3.72 1 | -120.99 -21.00 11
| 0.00 -43.48 -21.00 11 |
297.9 | 0.00 1.82 3.72 1 | -121.10 -21.00 11
| 0.00 -46.75 -21.00 11 |
325.0 | 0.00 2.03 3.72 1 | -121.21 -21.00 11
| 0.00 -50.04 -21.00 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 733 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 734
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 259.89 296.97 318.38 440.51 509.09
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 4-10í 4-10í 5-10í 6-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 135 mm c/c @ 135 mm c/c @ 135 mm c/c @ 135 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT670.0 mm AWAY FROM START SUPPORT
VY = 54.08 MX = -21.00 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 513 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 734 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 735
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 20.63 0.05 1 | 57.84 -1.57 13
| 0.00 -62.70 -1.57 13 |
264.6 | 0.00 17.37 0.05 1 | 54.21 -1.57 13
| 0.00 -47.88 -1.57 13 |
529.2 | 0.00 14.12 0.05 1 | 49.72 -1.57 13
| 0.00 -34.13 -1.57 13 |
793.8 | 0.00 9.98 -0.89 20 | 45.35 -1.57 13
| 0.00 -22.61 -1.03 21 |
1058.3 | 0.00 9.92 -0.89 20 | 39.40 -1.57 13
| 0.00 -12.91 -1.03 21 |
1322.9 | 0.00 9.89 -1.46 12 | 34.29 -1.57 13
| 0.00 -0.57 -1.57 13 |
1587.5 | 0.00 11.16 -1.90 11 | 27.75 -1.57 13
| 0.00 -1.10 -0.05 2 |
1852.1 | 0.00 14.42 -1.90 11 | 21.21 -1.57 13
| 0.00 -2.15 0.05 1 |
2116.7 | 0.00 19.04 -1.57 13 | 20.61 -1.03 21
| 0.00 -5.41 0.05 1 |
2381.2 | 0.00 22.50 -1.57 13 | -19.37 -1.46 12
| 0.00 -8.66 0.05 1 |
2645.8 | 0.00 25.50 -1.03 21 | -23.73 -1.46 12
| 0.00 -11.92 0.05 1 |
2910.4 | 0.00 28.81 -1.03 21 | -28.22 -1.46 12
| 0.00 -16.70 -0.89 20 |
3175.0 | 0.00 31.36 -1.03 21 | -31.86 -1.46 12
| 0.00 -23.91 -0.89 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 380.68 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 187.11
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -21.43 MX = -1.46 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 735 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 736
============================================================================
B E A M N O. 515 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.86 -0.06 3 | 43.85 -0.68 11
| 0.00 -21.29 -0.47 15 |
245.8 | 0.00 6.30 -0.41 22 | 37.97 -0.68 11
| 0.00 -6.27 -0.68 11 |
491.7 | 0.00 9.27 -0.41 22 | 31.02 -0.68 11
| 0.00 -4.22 -0.47 15 |
737.5 | 0.00 12.16 -0.62 14 | 24.22 -0.68 11
| 0.00 -4.09 0.06 4 |
983.3 | 0.00 15.09 -0.62 14 | 17.11 -0.68 11
| 0.00 -0.71 0.18 1 |
1229.2 | 0.00 16.45 -0.62 14 | 10.68 -0.47 15
| 0.00 -2.24 0.06 4 |
1475.0 | 0.00 18.19 -0.68 11 | -6.34 -0.41 22
| 0.00 -1.32 0.06 4 |
1720.8 | 0.00 17.05 -0.68 11 | -11.17 -0.62 14
| 0.00 -0.42 0.18 1 |
1966.7 | 0.00 13.81 -0.68 11 | -18.69 -0.62 14
| 0.00 -0.53 -0.06 3 |
2212.5 | 0.00 8.61 -0.68 11 | -24.84 -0.68 11
| 0.00 -1.45 -0.06 3 |
2458.3 | 0.00 4.15 -0.47 15 | -31.64 -0.68 11
| 0.00 -3.20 -0.41 22 |
2704.2 | 0.00 3.30 0.06 4 | -38.59 -0.68 11
| 0.00 -9.59 -0.62 14 |
2950.0 | 0.00 4.22 0.06 4 | -44.48 -0.68 11
| 0.00 -18.86 -0.62 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 736 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 737
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 29.93 MX = -0.68 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -30.27 MX = -0.68 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 516 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 275.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.85 31.27 5 | -178.01 53.79 11
| 0.00 -0.84 53.79 11 |
22.9 | 0.00 0.26 0.84 1 | -178.18 53.79 11
| 0.00 -3.99 43.10 14 |
45.8 | 0.00 0.04 -0.06 4 | -178.27 53.79 11
| 0.00 -9.00 53.79 11 |
68.8 | 0.00 0.17 0.84 1 | -178.43 53.79 11
| 0.00 -13.09 53.79 11 |
91.7 | 0.00 0.13 0.84 1 | -178.58 53.79 11
| 0.00 -13.59 44.04 12 |
114.6 | 0.00 0.08 0.84 1 | -178.67 53.79 11
| 0.00 -21.28 53.79 11 |
137.5 | 0.00 0.04 0.84 1 | -178.81 53.79 11
| 0.00 -25.37 53.79 11 |
160.4 | 0.00 0.01 -0.84 2 | -178.94 53.79 11
| 0.00 -23.59 44.04 12 |
183.3 | 0.00 0.00 -0.08 8 | -179.03 53.79 11
| 0.00 -33.57 53.79 11 |
206.2 | 0.00 0.10 -0.84 2 | -179.15 53.79 11
| 0.00 -37.68 53.79 11 |
229.2 | 0.00 0.15 -0.84 2 | -179.26 53.79 11
| 0.00 -41.78 53.79 11 |
252.1 | 0.00 0.19 -0.84 2 | -179.35 53.79 11
| 0.00 -45.89 53.79 11 |
275.0 | 0.00 0.24 -0.84 2 | -179.45 53.79 11
| 0.00 -50.00 53.79 11 |
============================================================================
============================================================================
B E A M N O. 517 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 737 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 738
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.24 -0.00 4 | -130.44 9.73 11
| 0.00 -2.86 9.73 11 |
37.5 | 0.00 0.02 0.00 7 | -130.81 9.73 11
| 0.00 -6.46 7.79 14 |
75.0 | 0.00 0.19 0.01 1 | -130.97 9.73 11
| 0.00 -12.66 9.73 11 |
112.5 | 0.00 0.17 0.01 1 | -131.35 9.73 11
| 0.00 -17.58 9.73 11 |
150.0 | 0.00 0.16 0.01 1 | -131.73 9.73 11
| 0.00 -22.51 9.73 11 |
187.5 | 0.00 0.14 0.01 1 | -131.87 9.73 11
| 0.00 -27.45 9.73 11 |
225.0 | 0.00 0.13 0.01 1 | -132.25 9.73 11
| 0.00 -32.41 9.73 11 |
262.5 | 0.00 0.11 0.01 1 | -132.63 9.73 11
| 0.00 -37.37 9.73 11 |
300.0 | 0.00 0.10 0.01 1 | -132.78 9.73 11
| 0.00 -42.35 9.73 11 |
337.5 | 0.00 0.09 0.01 1 | -133.16 9.73 11
| 0.00 -47.34 9.73 11 |
375.0 | 0.00 0.07 0.01 1 | -133.53 9.73 11
| 0.00 -52.34 9.73 11 |
412.5 | 0.00 0.06 0.01 1 | -133.68 9.73 11
| 0.00 -57.35 9.73 11 |
450.0 | 0.00 0.04 0.01 1 | -134.06 9.73 11
| 0.00 -62.37 9.73 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 178.50 189.79 277.53 368.69 463.61
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 4-10í 5-10í 6-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 115 mm c/c @ 115 mm c/c @ 120 mm c/c @ 120 mm c/c @ 125 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 35.75 MX = 9.73 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 738 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 739
============================================================================
B E A M N O. 518 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.03 0.31 2 | 53.39 -1.79 11
| 0.00 -30.83 -1.79 11 |
250.0 | 0.00 0.02 0.15 3 | 47.31 -1.79 11
| 0.00 -14.55 -1.81 12 |
500.0 | 0.00 0.01 0.15 3 | 41.40 -1.79 11
| 0.00 -7.06 -1.79 11 |
750.0 | 0.00 2.17 -1.79 11 | 31.94 -1.79 11
| 0.00 -0.02 -0.31 1 |
1000.0 | 0.00 9.26 -1.79 11 | 24.25 -1.79 11
| 0.00 -0.00 -0.03 7 |
1250.0 | 0.00 13.95 -1.79 11 | 13.60 -1.79 11
| 0.00 -0.01 -0.31 1 |
1500.0 | 0.00 12.81 -1.61 15 | 3.94 -1.79 11
| 0.00 -0.00 0.15 3 |
1750.0 | 0.00 12.23 -1.61 15 | -8.05 -1.79 11
| 0.00 -0.00 0.15 3 |
2000.0 | 0.00 12.04 -1.79 11 | -16.61 -1.79 11
| 0.00 -0.00 0.01 9 |
2250.0 | 0.00 6.50 -1.79 11 | -27.51 -1.79 11
| 0.00 -0.02 0.31 2 |
2500.0 | 0.00 0.02 -0.31 1 | -34.01 -1.79 11
| 0.00 -1.09 -1.79 11 |
2750.0 | 0.00 0.03 -0.31 1 | -40.57 -1.79 11
| 0.00 -10.36 -1.79 11 |
3000.0 | 0.00 0.03 -0.31 1 | -45.41 -1.79 11
| 0.00 -21.10 -1.79 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 191.29 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 739 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 740
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -29.68 MX = -1.79 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 519 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3350.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 3.68 0.00 3 | 45.37 0.22 11
| 0.00 -18.55 0.18 15 |
279.2 | 0.00 0.59 0.10 22 | 38.69 0.22 11
| 0.00 -7.89 0.10 23 |
558.3 | 0.00 5.38 0.18 14 | 30.77 0.22 11
| 0.00 -1.97 -0.00 4 |
837.5 | 0.00 11.28 0.22 11 | 23.02 0.22 11
| 0.00 -0.68 -0.52 1 |
1116.7 | 0.00 16.41 0.22 11 | 14.05 0.18 15
| 0.00 -0.26 -0.00 4 |
1395.8 | 0.00 18.88 0.22 11 | 3.94 -0.68 20
| 0.00 -0.08 -0.52 1 |
1675.0 | 0.00 18.59 0.22 11 | -6.29 0.80 13
| 0.00 -1.45 0.00 3 |
1954.2 | 0.00 15.39 0.22 11 | -14.62 0.80 13
| 0.00 -2.31 0.00 3 |
2233.3 | 0.00 11.34 0.18 15 | -25.48 0.22 11
| 0.00 -3.16 0.00 3 |
2512.5 | 0.00 6.77 0.10 23 | -35.53 0.22 11
| 0.00 -5.29 0.10 22 |
2791.7 | 0.00 4.88 -0.00 4 | -43.27 0.22 11
| 0.00 -14.01 0.18 14 |
3070.8 | 0.00 5.73 -0.00 4 | -51.20 0.22 11
| 0.00 -25.59 0.18 14 |
3350.0 | 0.00 6.59 -0.00 4 | -57.88 0.22 11
| 0.00 -38.80 0.18 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 222.53
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 740 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 741
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 31.27 MX = 0.22 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -40.25 MX = 0.22 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 520 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.20 18.82 20 | -121.58 23.92 11
| 0.00 -2.57 23.92 11 |
18.8 | 0.00 0.04 0.38 7 | -121.71 23.92 11
| 0.00 -3.63 21.50 15 |
37.5 | 0.00 0.17 1.97 4 | -121.78 23.92 11
| 0.00 -7.14 23.92 11 |
56.3 | 0.00 0.12 1.97 4 | -121.90 23.92 11
| 0.00 -9.42 23.92 11 |
75.0 | 0.00 -9.46 16.77 14 | -122.02 23.92 11
| 0.00 -9.14 24.16 12 |
93.8 | 0.00 0.09 4.19 1 | -122.09 23.92 11
| 0.00 -11.08 24.16 12 |
112.5 | 0.00 0.01 4.19 1 | -122.20 23.92 11
| 0.00 -16.29 23.92 11 |
131.3 | 0.00 0.00 -0.13 9 | -122.30 23.92 11
| 0.00 -18.58 23.92 11 |
150.0 | 0.00 0.17 -4.19 2 | -122.37 23.92 11
| 0.00 -20.87 23.92 11 |
168.8 | 0.00 0.26 -4.19 2 | -122.46 23.92 11
| 0.00 -23.17 23.92 11 |
187.5 | 0.00 0.35 -4.19 2 | -122.55 23.92 11
| 0.00 -25.46 23.92 11 |
206.3 | 0.00 0.44 -4.19 2 | -122.62 23.92 11
| 0.00 -27.76 23.92 11 |
225.0 | 0.00 0.53 -4.19 2 | -122.70 23.92 11
| 0.00 -30.06 23.92 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 741 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 742
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 239.57 280.58 322.28 364.72 407.91
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 399.82 188.97 177.23 177.23 177.23
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 80 mm c/c @ 80 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 1741.44 MX = 23.92 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 521 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 742 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 743
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 7.04 0.26 1 | 75.21 -1.07 11
| 0.00 -65.76 -1.07 11 |
268.8 | 0.00 5.81 0.26 1 | 70.21 -1.07 11
| 0.00 -37.62 -0.89 17 |
537.5 | 0.00 4.59 0.26 1 | 62.68 -1.07 11
| 0.00 -28.35 -1.07 11 |
806.2 | 0.00 0.31 0.02 7 | 55.68 -1.07 11
| 0.00 -12.43 -1.07 11 |
1075.0 | 0.00 3.50 -0.55 12 | 46.16 -1.07 11
| 0.00 -1.66 -1.17 13 |
1343.8 | 0.00 12.08 -1.07 11 | 35.15 -1.07 11
| 0.00 -0.00 -0.00 9 |
1612.5 | 0.00 19.91 -1.07 11 | 24.14 -1.17 13
| 0.00 -0.30 0.26 1 |
1881.3 | 0.00 24.64 -1.07 11 | 15.96 -1.17 13
| 0.00 -0.14 0.02 7 |
2150.0 | 0.00 26.39 -1.07 11 | 8.05 -0.95 21
| 0.00 -2.74 0.26 1 |
2418.8 | 0.00 25.49 -1.07 11 | -11.59 -0.55 12
| 0.00 -3.96 0.26 1 |
2687.5 | 0.00 24.15 -1.17 13 | -14.64 -1.07 11
| 0.00 -5.19 0.26 1 |
2956.2 | 0.00 21.61 -1.17 13 | -21.98 -1.07 11
| 0.00 -6.41 0.26 1 |
3225.0 | 0.00 17.83 -1.17 13 | -26.79 -1.07 11
| 0.00 -7.63 0.26 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 397.89 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 667.0 mm AWAY FROM START SUPPORT
VY = 60.68 MX = -1.07 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 743 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 744
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -14.57 MX = -1.07 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 522 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3300.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.80 -0.46 1 | 122.04 -1.53 11
| 0.00 -136.53 -1.53 11 |
275.0 | 0.00 1.24 -0.10 4 | 116.16 -1.53 11
| 0.00 -103.71 -1.53 11 |
550.0 | 0.00 1.25 -0.46 1 | 109.27 -1.53 11
| 0.00 -72.68 -1.53 11 |
825.0 | 0.00 0.97 -0.46 1 | 100.79 -1.53 11
| 0.00 -43.77 -1.53 11 |
1100.0 | 0.00 0.69 -0.46 1 | 91.07 -1.53 11
| 0.00 -14.62 -1.11 14 |
1375.0 | 0.00 6.10 -1.53 11 | 79.98 -1.53 11
| 0.00 -0.41 0.46 2 |
1650.0 | 0.00 26.36 -1.53 11 | 67.59 -1.53 11
| 0.00 -0.01 0.04 8 |
1925.0 | 0.00 43.28 -1.53 11 | 55.42 -1.53 11
| 0.00 -0.01 -0.10 4 |
2200.0 | 0.00 57.13 -1.53 11 | 46.39 -1.53 11
| 0.00 -0.42 -0.46 1 |
2475.0 | 0.00 68.13 -1.53 11 | 34.97 -1.53 11
| 0.00 -0.70 -0.46 1 |
2750.0 | 0.00 76.78 -1.53 11 | 28.00 -1.53 11
| 0.00 -0.98 -0.46 1 |
3025.0 | 0.00 83.45 -1.53 11 | 20.69 -1.53 11
| 0.00 -1.26 -0.46 1 |
3300.0 | 0.00 88.47 -1.53 11 | 15.79 -1.53 11
| 0.00 -1.54 -0.46 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 910.66 265.44 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 415.46 547.45
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 744 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 745
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 3-20í 3-20í 3-20í 3-20í 3-20í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 6-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 540.0 mm AWAY FROM START SUPPORT
VY = 109.58 MX = -1.53 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 523 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.29 -0.14 1 | 44.39 0.39 11
| 0.00 -8.75 0.47 13 |
291.7 | 0.00 5.58 0.14 12 | 37.29 0.39 11
| 0.00 -0.16 0.02 8 |
583.3 | 0.00 12.66 0.14 12 | 29.11 0.39 11
| 0.00 -1.13 0.14 2 |
875.0 | 0.00 17.76 0.29 14 | 20.69 0.39 11
| 0.00 -0.52 0.02 4 |
1166.7 | 0.00 26.19 0.39 11 | 12.03 0.47 13
| 0.00 -0.59 0.02 4 |
1458.3 | 0.00 28.45 0.39 11 | 5.12 0.47 13
| 0.00 -0.61 -0.14 1 |
1750.0 | 0.00 28.19 0.39 11 | -5.21 0.39 11
| 0.00 -0.11 -0.02 7 |
2041.7 | 0.00 22.44 0.47 13 | -13.85 0.39 11
| 0.00 -0.05 -0.01 10 |
2333.3 | 0.00 20.11 0.39 11 | -22.48 0.39 11
| 0.00 -2.34 -0.14 1 |
2625.0 | 0.00 13.34 0.47 13 | -31.12 0.39 11
| 0.00 -2.92 -0.14 1 |
2916.7 | 0.00 6.67 0.30 21 | -39.53 0.39 11
| 0.00 -3.83 -0.11 20 |
3208.3 | 0.00 4.08 0.14 2 | -47.71 0.39 11
| 0.00 -13.53 0.14 12 |
3500.0 | 0.00 4.66 0.14 2 | -54.82 0.39 11
| 0.00 -26.19 0.14 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 745 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 746
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 30.36 MX = 0.39 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -41.66 MX = 0.39 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 524 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 746 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 747
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 41.34 -7.83 11 | 37.22 -7.83 11
| 0.00 -0.65 0.05 1 |
158.3 | 0.00 38.24 -6.33 13 | 32.29 -7.83 11
| 0.00 -0.63 0.05 1 |
316.7 | 0.00 51.59 -7.83 11 | 27.45 -7.83 11
| 0.00 -0.39 -0.00 4 |
475.0 | 0.00 45.09 -6.33 13 | 21.23 -7.83 11
| 0.00 -0.58 0.05 1 |
633.3 | 0.00 47.51 -6.33 13 | 17.60 -7.83 11
| 0.00 -0.05 -0.00 7 |
791.7 | 0.00 60.72 -7.83 11 | 11.37 -7.83 11
| 0.00 -0.54 0.05 1 |
950.0 | 0.00 62.09 -7.83 11 | 6.89 -7.83 11
| 0.00 -0.52 0.05 1 |
1108.3 | 0.00 62.57 -7.83 11 | 0.94 -7.83 11
| 0.00 -0.50 0.05 1 |
1266.7 | 0.00 49.84 -6.26 17 | -5.07 -7.83 11
| 0.00 -0.00 0.00 9 |
1425.0 | 0.00 61.07 -7.83 11 | -11.14 -7.83 11
| 0.00 -0.46 0.05 1 |
1583.3 | 0.00 59.10 -7.83 11 | -13.77 -7.83 11
| 0.00 -0.43 0.05 1 |
1741.7 | 0.00 56.14 -7.83 11 | -20.70 -7.83 11
| 0.00 -0.41 0.05 1 |
1900.0 | 0.00 52.45 -7.83 11 | -25.72 -7.83 11
| 0.00 -0.39 0.05 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 313.41 321.25 443.02 436.47 382.06
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 4-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 525 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3375.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 747 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 748
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 44.21 4.45 11 | 22.51 4.45 11
| 0.00 -1.03 0.10 4 |
281.3 | 0.00 39.21 4.00 12 | 15.76 4.45 11
| 0.00 -0.39 0.37 1 |
562.5 | 0.00 52.93 4.45 11 | 7.60 4.45 11
| 0.00 -0.20 0.37 1 |
843.8 | 0.00 54.00 4.45 11 | -0.36 4.45 11
| 0.00 -0.01 0.37 1 |
1125.0 | 0.00 42.35 4.00 12 | -8.71 4.45 11
| 0.00 -0.18 -0.37 2 |
1406.3 | 0.00 48.68 4.45 11 | -20.07 4.45 11
| 0.00 -0.01 0.01 10 |
1687.5 | 0.00 41.80 4.45 11 | -29.63 4.45 11
| 0.00 -0.04 -0.01 8 |
1968.8 | 0.00 32.01 4.45 11 | -39.19 4.45 11
| 0.00 -0.75 -0.37 2 |
2250.0 | 0.00 19.34 4.45 11 | -50.55 4.45 11
| 0.00 -0.94 -0.37 2 |
2531.3 | 0.00 4.00 4.45 11 | -58.91 4.45 11
| 0.00 -1.13 -0.37 2 |
2812.5 | 0.00 1.32 0.37 1 | -66.86 4.45 11
| 0.00 -13.74 4.45 11 |
3093.8 | 0.00 1.51 0.37 1 | -75.02 4.45 11
| 0.00 -33.75 4.45 11 |
3375.0 | 0.00 1.69 0.37 1 | -81.77 4.45 11
| 0.00 -55.80 4.45 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 367.24
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 296.26 356.15 281.77 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 5-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 5-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM END SUPPORT
VY = -68.80 MX = 4.45 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 748 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 749
============================================================================
B E A M N O. 526 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 37.62 2.08 11 | 24.75 2.08 11
| 0.00 -1.34 0.37 2 |
291.7 | 0.00 43.82 2.08 11 | 17.78 2.08 11
| 0.00 -1.07 0.37 2 |
583.3 | 0.00 47.80 2.08 11 | 9.59 2.08 11
| 0.00 -0.80 0.37 2 |
875.0 | 0.00 49.38 2.08 11 | 2.38 2.11 13
| 0.00 0.00 0.00 1 |
1166.7 | 0.00 48.26 2.08 11 | -8.71 2.08 11
| 0.00 -0.06 0.08 3 |
1458.3 | 0.00 44.33 2.08 11 | -17.78 2.08 11
| 0.00 -0.08 0.08 3 |
1750.0 | 0.00 37.22 2.08 11 | -29.67 2.08 11
| 0.00 -0.30 -0.37 1 |
2041.7 | 0.00 27.02 2.08 11 | -41.57 2.08 11
| 0.00 -0.57 -0.37 1 |
2333.3 | 0.00 11.93 2.11 13 | -50.63 2.08 11
| 0.00 -0.85 -0.37 1 |
2625.0 | 0.00 0.46 1.30 21 | -60.92 2.08 11
| 0.00 -2.55 2.08 11 |
2916.7 | 0.00 1.40 0.37 2 | -68.94 2.08 11
| 0.00 -21.44 2.08 11 |
3208.3 | 0.00 1.67 0.37 2 | -77.13 2.08 11
| 0.00 -42.73 2.08 11 |
3500.0 | 0.00 1.94 0.37 2 | -84.10 2.08 11
| 0.00 -66.24 2.08 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.50 0.00 178.50 178.50 409.15
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 233.47 303.92 231.11 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 2-12í 3-12í 3-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 4-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 749 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 750
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -71.19 MX = 2.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 527 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 57.19 1.15 11 | -62.36 1.15 11
| 0.00 -0.73 1.01 1 |
122.9 | 0.00 49.32 1.15 11 | -66.73 1.15 11
| 0.00 -0.82 1.01 1 |
245.8 | 0.00 40.98 1.15 11 | -69.08 1.15 11
| 0.00 -0.92 1.01 1 |
368.8 | 0.00 32.17 1.15 11 | -73.37 1.15 11
| 0.00 -1.01 1.01 1 |
491.7 | 0.00 22.94 1.15 11 | -77.44 1.15 11
| 0.00 -1.11 1.01 1 |
614.6 | 0.00 10.45 1.40 15 | -80.39 1.15 11
| 0.00 -1.20 1.01 1 |
737.5 | 0.00 3.08 1.15 11 | -84.38 1.15 11
| 0.00 -1.29 1.01 1 |
860.4 | 0.00 1.39 -1.01 2 | -88.06 1.15 11
| 0.00 -7.66 2.13 12 |
983.3 | 0.00 1.48 -1.01 2 | -91.02 1.15 11
| 0.00 -18.51 1.15 11 |
1106.3 | 0.00 1.57 -1.01 2 | -94.17 1.15 11
| 0.00 -29.91 1.15 11 |
1229.2 | 0.00 1.67 -1.01 2 | -96.93 1.15 11
| 0.00 -41.65 1.15 11 |
1352.1 | 0.00 1.76 -1.01 2 | -99.28 1.15 11
| 0.00 -53.72 1.15 11 |
1475.0 | 0.00 1.85 -1.01 2 | -101.51 1.15 11
| 0.00 -66.07 1.15 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 179.79 398.47
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 342.28 192.45 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 750 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 751
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 542.0 mm AWAY FROM END SUPPORT
VY = -89.78 MX = 1.15 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 528 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 2.11 0.08 1 | 100.59 -2.80 11
| 0.00 -80.13 -2.80 11 |
122.9 | 0.00 2.02 0.08 1 | 97.68 -2.80 11
| 0.00 -67.95 -2.80 11 |
245.8 | 0.00 0.20 -0.02 7 | 94.51 -2.80 11
| 0.00 -47.21 -2.34 13 |
368.8 | 0.00 0.39 0.01 3 | 91.38 -2.80 11
| 0.00 -37.96 -2.34 13 |
491.7 | 0.00 1.74 0.08 1 | 88.17 -2.80 11
| 0.00 -33.67 -2.80 11 |
614.6 | 0.00 0.32 0.01 3 | 84.39 -2.80 11
| 0.00 -20.43 -2.34 13 |
737.5 | 0.00 0.16 -0.02 7 | 80.95 -2.80 11
| 0.00 -12.89 -2.80 11 |
860.4 | 0.00 0.71 -0.88 20 | 77.51 -2.80 11
| 0.00 -4.29 -2.34 13 |
983.3 | 0.00 6.55 -2.14 12 | 73.73 -2.80 11
| 0.00 -1.37 -0.08 2 |
1106.3 | 0.00 15.00 -2.80 11 | 70.52 -2.80 11
| 0.00 -1.28 -0.08 2 |
1229.2 | 0.00 23.47 -2.80 11 | 67.39 -2.80 11
| 0.00 -1.19 -0.08 2 |
1352.1 | 0.00 31.56 -2.80 11 | 64.22 -2.80 11
| 0.00 -1.10 -0.08 2 |
1475.0 | 0.00 39.27 -2.80 11 | 61.32 -2.80 11
| 0.00 -1.01 -0.08 2 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 751 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 752
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 509.90 238.04 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.50 178.50 178.50 178.50 250.32
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 7-10í 4-10í 3-10í 3-10í 3-10í
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 666.4 mm AWAY FROM START SUPPORT
VY = 82.98 MX = -2.80 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 530 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 752 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 753
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.80 -0.39 1 | 44.88 7.25 11
| 0.00 -13.34 7.25 11 |
262.5 | 0.00 0.09 -0.15 4 | 39.25 7.25 11
| 0.00 -2.29 7.25 11 |
525.0 | 0.00 7.10 7.25 11 | 31.86 7.25 11
| 0.00 -0.57 0.39 2 |
787.5 | 0.00 14.51 7.25 11 | 24.30 7.25 11
| 0.00 -0.45 0.39 2 |
1050.0 | 0.00 19.85 7.25 11 | 16.41 7.25 11
| 0.00 -0.34 0.39 2 |
1312.5 | 0.00 23.12 7.25 11 | 8.51 7.25 11
| 0.00 -0.03 0.15 3 |
1575.0 | 0.00 19.32 6.27 13 | 0.61 7.25 11
| 0.00 -0.11 0.39 2 |
1837.5 | 0.00 18.76 6.27 13 | -7.29 7.25 11
| 0.00 -0.01 -0.39 1 |
2100.0 | 0.00 20.49 7.25 11 | -15.18 7.25 11
| 0.00 -0.12 -0.39 1 |
2362.5 | 0.00 15.48 7.25 11 | -22.64 7.25 11
| 0.00 -0.23 -0.39 1 |
2625.0 | 0.00 8.50 7.25 11 | -30.27 7.25 11
| 0.00 -0.35 -0.39 1 |
2887.5 | 0.00 0.34 6.27 13 | -36.40 7.25 11
| 0.00 -0.27 7.25 11 |
3150.0 | 0.00 0.58 0.39 2 | -41.35 7.25 11
| 0.00 -10.50 7.25 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 532 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 753 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 754
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 33.48 1.44 11 | -17.54 1.44 11
| 0.00 -0.66 0.72 1 |
158.3 | 0.00 30.37 1.44 11 | -21.81 1.44 11
| 0.00 -0.43 0.72 1 |
316.7 | 0.00 20.97 2.02 12 | -26.74 1.44 11
| 0.00 -0.20 0.72 1 |
475.0 | 0.00 21.88 1.44 11 | -31.11 1.44 11
| 0.00 -0.01 0.18 4 |
633.3 | 0.00 16.36 1.44 11 | -36.68 1.44 11
| 0.00 -0.26 -0.72 2 |
791.7 | 0.00 10.00 1.44 11 | -42.89 1.44 11
| 0.00 -0.49 -0.72 2 |
950.0 | 0.00 2.17 1.97 20 | -48.20 1.44 11
| 0.00 -0.72 -0.72 2 |
1108.3 | 0.00 0.96 0.72 1 | -53.21 1.44 11
| 0.00 -5.21 1.44 11 |
1266.7 | 0.00 1.19 0.72 1 | -58.46 1.44 11
| 0.00 -11.29 1.14 18 |
1425.0 | 0.00 1.42 0.72 1 | -61.66 1.44 11
| 0.00 -23.51 1.44 11 |
1583.3 | 0.00 1.65 0.72 1 | -65.52 1.44 11
| 0.00 -33.65 1.44 11 |
1741.7 | 0.00 1.88 0.72 1 | -69.13 1.44 11
| 0.00 -44.34 1.44 11 |
1900.0 | 0.00 2.11 0.72 1 | -71.98 1.44 11
| 0.00 -55.52 1.44 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 334.91
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 203.42 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -57.82 MX = 1.44 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 754 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 755
============================================================================
B E A M N O. 533 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 64.24 0.12 11 | 3.18 0.42 20
| 0.00 -0.68 0.27 1 |
158.3 | 0.00 64.10 0.12 11 | -3.39 -0.23 13
| 0.00 -0.00 0.01 10 |
316.7 | 0.00 51.12 -0.23 13 | -6.75 -0.23 13
| 0.00 0.00 0.00 1 |
475.0 | 0.00 49.80 -0.23 13 | -11.12 0.12 11
| 0.00 -0.01 0.08 4 |
633.3 | 0.00 59.80 0.12 11 | -15.39 0.12 11
| 0.00 -0.07 0.27 1 |
791.7 | 0.00 56.96 0.12 11 | -20.60 0.12 11
| 0.00 -0.08 -0.27 2 |
950.0 | 0.00 42.96 0.42 12 | -25.24 0.12 11
| 0.00 -0.23 -0.27 2 |
1108.3 | 0.00 39.64 0.42 12 | -29.88 0.12 11
| 0.00 -0.38 -0.27 2 |
1266.7 | 0.00 35.06 0.19 15 | -35.10 0.12 11
| 0.00 -0.54 -0.27 2 |
1425.0 | 0.00 37.93 0.12 11 | -39.36 0.12 11
| 0.00 -0.69 -0.27 2 |
1583.3 | 0.00 31.36 0.12 11 | -43.49 0.12 11
| 0.00 -0.84 -0.27 2 |
1741.7 | 0.00 24.13 0.12 11 | -47.69 0.12 11
| 0.00 -0.99 -0.27 2 |
1900.0 | 0.00 16.29 0.12 11 | -51.44 0.12 11
| 0.00 -1.15 -0.27 2 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 375.35 288.03 248.95 216.25 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 5-10í 4-10í 4-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 755 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 756
============================================================================
B E A M N O. 534 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.59 -3.64 2 | -126.06 -22.49 11
| 0.00 -11.14 -22.49 11 |
27.1 | 0.00 0.41 -3.64 2 | -126.28 -22.49 11
| 0.00 -14.55 -22.49 11 |
54.2 | 0.00 0.23 -3.64 2 | -126.39 -22.49 11
| 0.00 -17.98 -22.49 11 |
81.3 | 0.00 0.08 1.44 4 | -126.59 -22.49 11
| 0.00 -21.40 -22.49 11 |
108.3 | 0.00 0.15 1.44 4 | -126.78 -22.49 11
| 0.00 -24.83 -22.49 11 |
135.4 | 0.00 0.31 3.64 1 | -126.89 -22.49 11
| 0.00 -28.27 -22.49 11 |
162.5 | 0.00 0.29 1.44 4 | -127.06 -22.49 11
| 0.00 -31.71 -22.49 11 |
189.6 | 0.00 0.67 3.64 1 | -127.22 -22.49 11
| 0.00 -35.15 -22.49 11 |
216.7 | 0.00 0.42 1.44 4 | -127.33 -22.49 11
| 0.00 -30.96 -18.39 17 |
243.8 | 0.00 1.03 3.64 1 | -127.48 -22.49 11
| 0.00 -42.05 -22.49 11 |
270.8 | 0.00 1.20 3.64 1 | -127.61 -22.49 11
| 0.00 -45.50 -22.49 11 |
297.9 | 0.00 1.38 3.64 1 | -127.72 -22.49 11
| 0.00 -48.96 -22.49 11 |
325.0 | 0.00 1.56 3.64 1 | -127.83 -22.49 11
| 0.00 -52.42 -22.49 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 276.03 338.35 402.35 472.84 541.31
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 180.35 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 4-10í 5-10í 6-10í 7-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 80 mm c/c @ 80 mm c/c @ 80 mm c/c @ 130 mm c/c @ 130 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 756 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 757
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT670.0 mm AWAY FROM START SUPPORT
VY = 57.04 MX = -22.49 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 536 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 20.37 -0.02 1 | 59.82 -1.28 13
| 0.00 -65.73 -1.28 13 |
264.6 | 0.00 17.14 -0.02 1 | 56.19 -1.28 13
| 0.00 -50.39 -1.28 13 |
529.2 | 0.00 7.40 -0.84 20 | 51.70 -1.28 13
| 0.00 -36.11 -1.28 13 |
793.8 | 0.00 10.68 -0.02 1 | 47.33 -1.28 13
| 0.00 -23.02 -1.28 13 |
1058.3 | 0.00 8.95 -0.84 20 | 41.37 -1.28 13
| 0.00 -13.40 -0.78 21 |
1322.9 | 0.00 9.14 -1.33 12 | 36.27 -1.28 13
| 0.00 -4.27 -0.78 21 |
1587.5 | 0.00 10.08 -1.33 12 | 29.73 -1.28 13
| 0.00 -0.99 0.02 2 |
1852.1 | 0.00 15.07 -1.64 11 | 23.19 -1.28 13
| 0.00 -2.24 -0.02 1 |
2116.7 | 0.00 17.03 -1.64 11 | 21.86 -0.78 21
| 0.00 -1.45 -0.05 4 |
2381.2 | 0.00 24.17 -1.28 13 | -17.17 -1.33 12
| 0.00 -8.70 -0.02 1 |
2645.8 | 0.00 26.81 -1.28 13 | -21.54 -1.33 12
| 0.00 -11.93 -0.02 1 |
2910.4 | 0.00 30.65 -0.78 21 | -26.03 -1.33 12
| 0.00 -14.84 -0.84 20 |
3175.0 | 0.00 33.53 -0.78 21 | -29.66 -1.33 12
| 0.00 -21.64 -0.84 20 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 399.92 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 197.39
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 757 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 758
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 667.0 mm AWAY FROM END SUPPORT
VY = -19.24 MX = -1.33 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 538 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.77 -0.05 3 | 45.82 -0.69 11
| 0.00 -20.15 -0.69 11 |
245.8 | 0.00 1.50 -0.05 3 | 39.93 -0.69 11
| 0.00 -9.49 -0.50 15 |
491.7 | 0.00 2.01 -0.39 22 | 32.98 -0.69 11
| 0.00 -1.70 -0.24 23 |
737.5 | 0.00 6.70 -0.69 11 | 26.18 -0.69 11
| 0.00 -0.05 -0.00 9 |
983.3 | 0.00 10.62 -0.61 14 | 19.07 -0.69 11
| 0.00 -0.70 0.05 4 |
1229.2 | 0.00 12.98 -0.72 13 | 9.67 -0.69 11
| 0.00 -0.04 -0.00 9 |
1475.0 | 0.00 17.26 -0.69 11 | 1.65 -0.69 11
| 0.00 -0.03 -0.00 9 |
1720.8 | 0.00 13.32 -0.56 17 | -6.37 -0.69 11
| 0.00 -0.10 -0.05 3 |
1966.7 | 0.00 13.85 -0.69 11 | -15.77 -0.69 11
| 0.00 -0.36 0.14 1 |
2212.5 | 0.00 9.13 -0.69 11 | -22.88 -0.69 11
| 0.00 -0.64 -0.05 3 |
2458.3 | 0.00 3.19 -0.50 15 | -29.68 -0.69 11
| 0.00 -0.50 -0.39 22 |
2704.2 | 0.00 1.17 0.05 4 | -36.63 -0.69 11
| 0.00 -5.85 -0.61 14 |
2950.0 | 0.00 1.44 0.05 4 | -42.52 -0.69 11
| 0.00 -15.28 -0.69 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 758 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 759
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 31.89 MX = -0.69 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -28.31 MX = -0.69 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 539 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 275.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
WARNING:Section fails while designing section: 0.0 mm
Nominal shear force exceeds tauc_max limit
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 759 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 760
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.01 33.07 5 | -166.05 56.84 11
| 0.00 -2.53 56.84 11 |
22.9 | 0.00 0.19 0.80 1 | -166.22 56.84 11
| 0.00 -4.84 46.44 12 |
45.8 | 0.00 0.17 0.80 1 | -166.31 56.84 11
| 0.00 -10.14 56.84 11 |
68.8 | 0.00 -5.80 29.66 23 | -166.47 56.84 11
| 0.00 -13.96 56.84 11 |
91.7 | 0.00 0.13 0.80 1 | -166.62 56.84 11
| 0.00 -17.77 56.84 11 |
114.6 | 0.00 0.01 0.08 7 | -166.71 56.84 11
| 0.00 -17.14 46.44 12 |
137.5 | 0.00 0.01 0.08 7 | -166.85 56.84 11
| 0.00 -25.41 56.84 11 |
160.4 | 0.00 0.07 0.80 1 | -166.98 56.84 11
| 0.00 -29.24 56.84 11 |
183.3 | 0.00 0.05 0.80 1 | -167.07 56.84 11
| 0.00 -26.40 46.44 12 |
206.2 | 0.00 0.03 0.80 1 | -167.19 56.84 11
| 0.00 -36.90 56.84 11 |
229.2 | 0.00 0.00 0.80 1 | -167.29 56.84 11
| 0.00 -40.73 56.84 11 |
252.1 | 0.00 0.02 -0.80 2 | -167.39 56.84 11
| 0.00 -44.56 56.84 11 |
275.0 | 0.00 0.04 -0.80 2 | -167.48 56.84 11
| 0.00 -48.40 56.84 11 |
============================================================================
============================================================================
B E A M N O. 540 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.19 -0.00 4 | -135.40 10.04 11
| 0.00 -3.65 10.04 11 |
37.5 | 0.00 -3.99 4.59 20 | -135.76 10.04 11
| 0.00 -8.73 10.04 11 |
75.0 | 0.00 0.18 -0.00 4 | -135.93 10.04 11
| 0.00 -13.82 10.04 11 |
112.5 | 0.00 0.15 0.02 1 | -136.30 10.04 11
| 0.00 -18.93 10.04 11 |
150.0 | 0.00 0.18 -0.00 4 | -136.68 10.04 11
| 0.00 -19.46 8.03 14 |
187.5 | 0.00 0.18 -0.00 4 | -136.83 10.04 11
| 0.00 -23.56 8.03 14 |
225.0 | 0.00 0.16 0.02 1 | -137.21 10.04 11
| 0.00 -34.32 10.04 11 |
262.5 | 0.00 0.16 0.02 1 | -137.58 10.04 11
| 0.00 -39.47 10.04 11 |
300.0 | 0.00 0.16 0.02 1 | -137.73 10.04 11
| 0.00 -44.63 10.04 11 |
337.5 | 0.00 0.16 0.02 1 | -138.11 10.04 11
| 0.00 -49.80 10.04 11 |
375.0 | 0.00 0.16 0.02 1 | -138.49 10.04 11
| 0.00 -54.99 10.04 11 |
412.5 | 0.00 0.16 0.02 1 | -138.64 10.04 11
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 760 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 761
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 178.50 200.67 292.11 387.23 491.37
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 4-10í 5-10í 7-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 110 mm c/c @ 110 mm c/c @ 115 mm c/c @ 115 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 37.07 MX = 10.04 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 541 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 761 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 762
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.03 0.31 2 | 53.38 -1.93 11
| 0.00 -30.80 -1.93 11 |
250.0 | 0.00 0.03 0.31 2 | 47.30 -1.93 11
| 0.00 -18.12 -1.93 11 |
500.0 | 0.00 0.02 0.31 2 | 41.39 -1.93 11
| 0.00 -7.04 -1.93 11 |
750.0 | 0.00 2.19 -1.93 11 | 31.93 -1.93 11
| 0.00 -0.02 -0.31 1 |
1000.0 | 0.00 9.28 -1.93 11 | 24.24 -1.93 11
| 0.00 -0.00 -0.03 7 |
1250.0 | 0.00 13.96 -1.93 11 | 13.59 -1.93 11
| 0.00 -0.00 -0.31 1 |
1500.0 | 0.00 12.82 -1.91 12 | 3.93 -1.93 11
| 0.00 -0.00 0.14 3 |
1750.0 | 0.00 15.29 -1.93 11 | -8.06 -1.93 11
| 0.00 -0.01 0.31 2 |
2000.0 | 0.00 12.05 -1.93 11 | -16.62 -1.93 11
| 0.00 -0.01 0.31 2 |
2250.0 | 0.00 6.51 -1.93 11 | -27.53 -1.93 11
| 0.00 -0.02 0.31 2 |
2500.0 | 0.00 0.02 -0.31 1 | -34.02 -1.93 11
| 0.00 -1.08 -1.93 11 |
2750.0 | 0.00 0.03 -0.31 1 | -40.58 -1.93 11
| 0.00 -10.36 -1.93 11 |
3000.0 | 0.00 0.03 -0.31 1 | -45.42 -1.93 11
| 0.00 -21.10 -1.93 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 192.43 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -29.69 MX = -1.93 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 762 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 763
============================================================================
B E A M N O. 542 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3350.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.27 0.48 2 | 44.67 0.25 11
| 0.00 -16.25 0.25 11 |
279.2 | 0.00 1.05 0.48 2 | 37.98 0.25 11
| 0.00 -5.03 -0.38 12 |
558.3 | 0.00 4.83 0.78 13 | 30.06 0.25 11
| 0.00 -0.82 -0.48 1 |
837.5 | 0.00 12.12 0.25 11 | 22.31 0.25 11
| 0.00 -0.59 -0.48 1 |
1116.7 | 0.00 14.08 0.78 13 | 12.26 0.25 11
| 0.00 -0.13 -0.00 4 |
1395.8 | 0.00 15.63 0.78 13 | 3.17 -0.61 20
| 0.00 -0.14 -0.48 1 |
1675.0 | 0.00 18.83 0.25 11 | -6.54 0.78 13
| 0.00 -0.08 0.48 2 |
1954.2 | 0.00 15.43 0.25 11 | -14.87 0.78 13
| 0.00 -0.31 0.48 2 |
2233.3 | 0.00 8.45 0.20 15 | -26.18 0.25 11
| 0.00 -0.54 0.48 2 |
2512.5 | 0.00 1.71 -0.61 20 | -36.23 0.25 11
| 0.00 -0.58 0.83 21 |
2791.7 | 0.00 0.99 -0.48 1 | -43.98 0.25 11
| 0.00 -10.74 0.25 11 |
3070.8 | 0.00 1.22 -0.48 1 | -51.90 0.25 11
| 0.00 -24.14 0.25 11 |
3350.0 | 0.00 1.44 -0.48 1 | -58.59 0.25 11
| 0.00 -39.56 0.25 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 178.50 178.50 178.50 178.50 227.12
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 763 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 764
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 545.0 mm AWAY FROM START SUPPORT
VY = 30.57 MX = 0.25 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM END SUPPORT
VY = -40.95 MX = 0.25 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 543 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.48 4.11 1 | -113.47 25.75 11
| 0.00 -3.66 25.75 11 |
18.8 | 0.00 0.40 4.11 1 | -113.60 25.75 11
| 0.00 -5.79 25.75 11 |
37.5 | 0.00 0.03 0.38 7 | -113.67 25.75 11
| 0.00 -7.92 25.75 11 |
56.3 | 0.00 0.23 4.11 1 | -113.79 25.75 11
| 0.00 -7.76 25.53 12 |
75.0 | 0.00 0.15 4.11 1 | -113.91 25.75 11
| 0.00 -12.19 25.75 11 |
93.8 | 0.00 0.07 4.11 1 | -113.98 25.75 11
| 0.00 -14.32 25.75 11 |
112.5 | 0.00 0.01 -4.11 2 | -114.09 25.75 11
| 0.00 -13.18 25.53 12 |
131.3 | 0.00 0.09 -4.11 2 | -114.19 25.75 11
| 0.00 -14.89 21.05 16 |
150.0 | 0.00 0.01 -0.13 9 | -114.26 25.75 11
| 0.00 -20.74 25.75 11 |
168.8 | 0.00 0.25 -4.11 2 | -114.35 25.75 11
| 0.00 -22.89 25.75 11 |
187.5 | 0.00 0.33 -4.11 2 | -114.44 25.75 11
| 0.00 -25.03 25.75 11 |
206.3 | 0.00 0.41 -4.11 2 | -114.51 25.75 11
| 0.00 -27.18 25.75 11 |
225.0 | 0.00 0.49 -4.11 2 | -114.59 25.75 11
| 0.00 -29.33 25.75 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 264.10 286.57 319.50 381.80 422.36
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 260.07 233.51 201.63 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 764 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 765
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 1701.91 MX = 25.75 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 544 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.72 0.26 1 | 77.58 -1.10 11
| 0.00 -69.42 -1.10 11 |
268.8 | 0.00 0.51 0.02 7 | 72.58 -1.10 11
| 0.00 -46.07 -1.19 13 |
537.5 | 0.00 0.40 0.02 7 | 65.05 -1.10 11
| 0.00 -30.74 -1.10 11 |
806.2 | 0.00 3.22 0.26 1 | 58.05 -1.10 11
| 0.00 -15.21 -1.19 13 |
1075.0 | 0.00 2.50 -0.57 12 | 48.53 -1.10 11
| 0.00 -3.48 -0.97 21 |
1343.8 | 0.00 10.35 -0.57 12 | 37.52 -1.10 11
| 0.00 -0.08 -0.04 3 |
1612.5 | 0.00 16.39 -1.19 13 | 25.79 -1.19 13
| 0.00 -0.28 0.26 1 |
1881.3 | 0.00 25.44 -1.10 11 | 17.61 -1.19 13
| 0.00 -1.45 0.26 1 |
2150.0 | 0.00 27.83 -1.10 11 | 8.92 -0.97 21
| 0.00 -2.61 0.26 1 |
2418.8 | 0.00 27.56 -1.10 11 | -9.44 -0.57 12
| 0.00 -3.78 0.26 1 |
2687.5 | 0.00 26.03 -1.19 13 | -12.27 -1.10 11
| 0.00 -4.95 0.26 1 |
2956.2 | 0.00 23.93 -1.19 13 | -19.61 -1.10 11
| 0.00 -6.11 0.26 1 |
3225.0 | 0.00 20.60 -1.19 13 | -24.42 -1.10 11
| 0.00 -7.28 0.26 1 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 765 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 766
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 419.14 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 4-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 63.06 MX = -1.10 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -12.20 MX = -1.10 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 545 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3300.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 766 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 767
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.82 -0.37 1 | 69.47 -1.73 11
| 0.00 -89.94 -1.73 11 |
275.0 | 0.00 1.53 -0.37 1 | 67.40 -1.73 11
| 0.00 -58.69 -0.94 13 |
550.0 | 0.00 1.25 -0.37 1 | 64.60 -1.73 11
| 0.00 -52.89 -1.73 11 |
825.0 | 0.00 0.08 -0.03 7 | 60.63 -1.73 11
| 0.00 -29.69 -0.94 13 |
1100.0 | 0.00 0.69 -0.37 1 | 55.75 -1.73 11
| 0.00 -19.62 -1.73 11 |
1375.0 | 0.00 0.41 -0.04 4 | 49.86 -1.73 11
| 0.00 -4.61 -1.33 14 |
1650.0 | 0.00 7.61 -1.73 11 | 43.03 -1.73 11
| 0.00 -0.12 0.37 2 |
1925.0 | 0.00 14.63 -1.82 12 | 36.35 -1.73 11
| 0.00 -0.03 -0.04 4 |
2200.0 | 0.00 22.55 -1.33 14 | 31.98 -1.73 11
| 0.00 -0.44 -0.37 1 |
2475.0 | 0.00 35.62 -1.73 11 | 25.85 -1.73 11
| 0.00 -0.72 -0.37 1 |
2750.0 | 0.00 42.34 -1.73 11 | 22.99 -1.73 11
| 0.00 -1.00 -0.37 1 |
3025.0 | 0.00 48.21 -1.73 11 | 19.88 -1.73 11
| 0.00 -1.29 -0.37 1 |
3300.0 | 0.00 53.50 -1.73 11 | 18.54 -1.73 11
| 0.00 -1.57 -0.37 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 562.63 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 218.84 326.32
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 825.0 mm 1650.0 mm 2475.0 mm 3300.0 mm
----------------------------------------------------------------------------
TOP 5-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 64.75 MX = -1.73 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 767 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 768
============================================================================
B E A M N O. 546 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 17.35 1.28 11 | 5.50 1.28 11
| 0.00 -1.09 -0.19 4 |
291.7 | 0.00 18.75 1.28 11 | 4.11 1.28 11
| 0.00 -1.05 -0.19 4 |
583.3 | 0.00 16.94 1.25 14 | 2.36 1.27 13
| 0.00 -0.43 -0.21 1 |
875.0 | 0.00 19.90 1.28 11 | 0.48 1.27 13
| 0.00 -0.97 -0.19 4 |
1166.7 | 0.00 16.64 1.25 14 | -2.92 1.28 11
| 0.00 -0.82 -0.21 1 |
1458.3 | 0.00 18.19 1.28 11 | -5.43 1.28 11
| 0.00 -0.88 -0.19 4 |
1750.0 | 0.00 16.24 1.28 11 | -7.94 1.28 11
| 0.00 -1.22 -0.21 1 |
2041.7 | 0.00 13.56 1.28 11 | -10.45 1.28 11
| 0.00 -1.41 -0.21 1 |
2333.3 | 0.00 10.14 1.28 11 | -12.96 1.28 11
| 0.00 -0.15 -0.02 7 |
2625.0 | 0.00 6.96 1.27 13 | -15.47 1.28 11
| 0.00 -1.81 -0.21 1 |
2916.7 | 0.00 3.30 1.27 13 | -17.82 1.28 11
| 0.00 -2.29 0.33 20 |
3208.3 | 0.00 1.24 0.95 21 | -20.00 1.28 11
| 0.00 -6.17 0.78 12 |
3500.0 | 0.00 2.40 0.21 2 | -21.39 1.28 11
| 0.00 -10.46 1.28 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 768 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 769
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 2.64 MX = 1.27 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -18.81 MX = 1.28 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 547 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 19.62 -3.02 11 | 20.43 -3.02 11
| 0.00 -0.46 -0.02 1 |
158.3 | 0.00 22.68 -3.02 11 | 18.11 -3.02 11
| 0.00 -0.09 -0.02 4 |
316.7 | 0.00 25.37 -3.02 11 | 15.86 -3.02 11
| 0.00 -0.54 -0.02 1 |
475.0 | 0.00 22.82 -2.39 13 | 12.59 -3.02 11
| 0.00 -0.58 -0.02 1 |
633.3 | 0.00 29.53 -3.02 11 | 11.22 -3.02 11
| 0.00 -0.62 -0.02 1 |
791.7 | 0.00 30.96 -3.02 11 | 7.95 -3.02 11
| 0.00 -0.65 -0.02 1 |
950.0 | 0.00 32.01 -3.02 11 | 5.96 -3.02 11
| 0.00 -0.69 -0.02 1 |
1108.3 | 0.00 32.61 -3.02 11 | 2.89 -3.02 11
| 0.00 -0.73 -0.02 1 |
1266.7 | 0.00 26.33 -2.41 17 | -0.22 -3.02 11
| 0.00 -0.01 0.00 10 |
1425.0 | 0.00 32.61 -3.02 11 | -3.38 -3.02 11
| 0.00 -0.80 -0.02 1 |
1583.3 | 0.00 32.03 -3.02 11 | -4.01 -3.02 11
| 0.00 -0.84 -0.02 1 |
1741.7 | 0.00 30.93 -3.02 11 | -7.80 -3.02 11
| 0.00 -0.88 -0.02 1 |
1900.0 | 0.00 29.49 -3.02 11 | -10.19 -3.02 11
| 0.00 -0.92 -0.02 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 210.06 213.60 195.28
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 769 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 770
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 548 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3375.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 18.79 1.95 11 | 4.23 1.95 11
| 0.00 -0.30 -0.05 3 |
281.3 | 0.00 19.80 1.95 11 | 2.96 1.95 11
| 0.00 -0.25 -0.05 3 |
562.5 | 0.00 20.36 1.95 11 | 0.66 1.95 11
| 0.00 -0.20 -0.05 3 |
843.8 | 0.00 20.28 1.95 11 | -1.48 1.95 11
| 0.00 -0.19 0.04 1 |
1125.0 | 0.00 19.48 1.95 11 | -3.93 1.95 11
| 0.00 -0.05 -0.00 9 |
1406.3 | 0.00 17.76 1.95 11 | -8.57 1.95 11
| 0.00 -0.05 -0.05 3 |
1687.5 | 0.00 14.97 1.95 11 | -11.89 1.95 11
| 0.00 -0.16 0.04 1 |
1968.8 | 0.00 11.07 1.95 11 | -15.22 1.95 11
| 0.00 -0.03 0.00 10 |
2250.0 | 0.00 6.10 1.95 11 | -19.86 1.95 11
| 0.00 -0.04 0.00 10 |
2531.3 | 0.00 0.21 1.95 11 | -22.30 1.95 11
| 0.00 -0.01 1.62 15 |
2812.5 | 0.00 0.20 -0.05 3 | -24.45 1.95 11
| 0.00 -6.41 1.95 11 |
3093.8 | 0.00 0.25 -0.05 3 | -26.75 1.95 11
| 0.00 -13.65 1.95 11 |
3375.0 | 0.00 0.30 -0.05 3 | -28.02 1.95 11
| 0.00 -21.35 1.95 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 770 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 771
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 843.8 mm 1687.5 mm 2531.3 mm 3375.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -25.58 MX = 1.95 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 549 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3500.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 20.04 1.84 11 | 3.33 1.94 13
| 0.00 -1.42 0.39 2 |
291.7 | 0.00 20.71 1.84 11 | 2.30 1.94 13
| 0.00 -0.15 -0.07 4 |
583.3 | 0.00 20.86 1.84 11 | 0.55 1.94 13
| 0.00 -0.95 0.39 2 |
875.0 | 0.00 17.14 1.00 12 | -2.59 1.84 11
| 0.00 -0.71 0.39 2 |
1166.7 | 0.00 15.17 1.56 14 | -6.31 1.84 11
| 0.00 -0.03 0.07 3 |
1458.3 | 0.00 16.71 1.84 11 | -9.14 1.84 11
| 0.00 -0.23 0.39 2 |
1750.0 | 0.00 13.19 1.84 11 | -14.04 1.84 11
| 0.00 -0.15 0.07 3 |
2041.7 | 0.00 8.52 1.84 11 | -18.94 1.84 11
| 0.00 -0.03 -0.04 7 |
2333.3 | 0.00 2.44 1.38 15 | -21.76 1.84 11
| 0.00 -0.49 -0.39 1 |
2625.0 | 0.00 0.72 0.39 2 | -25.48 1.84 11
| 0.00 -4.20 1.84 11 |
2916.7 | 0.00 0.96 0.39 2 | -27.54 1.84 11
| 0.00 -11.90 1.84 11 |
3208.3 | 0.00 1.20 0.39 2 | -29.73 1.84 11
| 0.00 -20.24 1.84 11 |
3500.0 | 0.00 1.44 0.39 2 | -31.02 1.84 11
| 0.00 -29.10 1.84 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 771 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 772
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 181.61
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 875.0 mm 1750.0 mm 2625.0 mm 3500.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -28.63 MX = 1.84 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 550 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 772 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 773
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 34.44 -0.67 11 | -25.06 -0.67 11
| 0.00 -1.26 0.44 1 |
122.9 | 0.00 24.99 -0.51 19 | -27.26 -0.67 11
| 0.00 -1.37 0.44 1 |
245.8 | 0.00 24.09 -1.07 13 | -27.98 -0.67 11
| 0.00 -1.49 0.44 1 |
368.8 | 0.00 24.27 -0.67 11 | -30.12 -0.67 11
| 0.00 -0.45 0.30 4 |
491.7 | 0.00 20.48 -0.67 11 | -32.10 -0.67 11
| 0.00 -0.49 0.30 4 |
614.6 | 0.00 16.46 -0.67 11 | -33.26 -0.67 11
| 0.00 -1.83 0.44 1 |
737.5 | 0.00 12.11 -1.07 13 | -35.18 -0.67 11
| 0.00 -1.94 0.44 1 |
860.4 | 0.00 6.99 -0.90 14 | -36.88 -0.67 11
| 0.00 -0.62 0.30 4 |
983.3 | 0.00 4.59 -0.99 21 | -38.04 -0.67 11
| 0.00 -2.17 0.44 1 |
1106.3 | 0.00 2.44 -0.99 21 | -39.34 -0.67 11
| 0.00 -4.40 0.34 20 |
1229.2 | 0.00 2.39 -0.44 2 | -40.37 -0.67 11
| 0.00 -8.04 -0.00 12 |
1352.1 | 0.00 2.51 -0.44 2 | -41.08 -0.67 11
| 0.00 -11.47 -0.67 11 |
1475.0 | 0.00 2.62 -0.44 2 | -41.71 -0.67 11
| 0.00 -16.57 -0.67 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 201.64 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -37.53 MX = -0.67 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 773 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 774
============================================================================
B E A M N O. 551 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1475.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.86 -0.24 1 | 27.95 -0.37 11
| 0.00 -12.70 -0.37 11 |
122.9 | 0.00 0.83 0.06 3 | 27.44 -0.37 11
| 0.00 -9.29 -0.37 11 |
245.8 | 0.00 1.74 -0.24 1 | 26.72 -0.37 11
| 0.00 -5.71 -0.37 15 |
368.8 | 0.00 1.68 -0.24 1 | 26.04 -0.37 11
| 0.00 -3.30 0.29 21 |
491.7 | 0.00 3.18 -0.43 20 | 25.29 -0.37 11
| 0.00 -1.67 0.29 21 |
614.6 | 0.00 2.97 -0.33 16 | 24.13 -0.37 11
| 0.00 -0.63 -0.06 4 |
737.5 | 0.00 6.90 -0.59 12 | 23.22 -0.37 11
| 0.00 -1.49 0.24 2 |
860.4 | 0.00 9.18 -0.37 11 | 22.31 -0.37 11
| 0.00 -1.43 0.24 2 |
983.3 | 0.00 11.12 -0.59 12 | 21.15 -0.37 11
| 0.00 -1.37 0.24 2 |
1106.3 | 0.00 14.41 -0.37 11 | 20.40 -0.37 11
| 0.00 -1.31 0.24 2 |
1229.2 | 0.00 16.87 -0.37 11 | 19.72 -0.37 11
| 0.00 -1.24 0.24 2 |
1352.1 | 0.00 19.25 -0.37 11 | 19.00 -0.37 11
| 0.00 -1.18 0.24 2 |
1475.0 | 0.00 21.55 -0.37 11 | 18.49 -0.37 11
| 0.00 -1.12 0.24 2 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 368.8 mm 737.5 mm 1106.3 mm 1475.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 774 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 775
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 23.76 MX = -0.37 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 552 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.22 0.09 2 | 10.52 2.60 11
| 0.00 -10.00 2.60 11 |
250.0 | 0.00 0.11 -0.01 8 | 9.41 2.60 11
| 0.00 -7.51 2.60 11 |
500.0 | 0.00 0.25 -0.09 4 | 7.49 2.60 11
| 0.00 -5.12 1.98 12 |
750.0 | 0.00 0.06 -0.01 8 | 5.68 2.60 11
| 0.00 -3.70 2.60 11 |
1000.0 | 0.00 0.14 -0.09 4 | 3.64 2.60 11
| 0.00 -2.56 2.60 11 |
1250.0 | 0.00 0.12 -0.09 1 | -0.14 2.60 11
| 0.00 -2.10 2.60 11 |
1500.0 | 0.00 0.39 -0.09 1 | -2.88 2.60 11
| 0.00 -2.40 2.19 13 |
1750.0 | 0.00 0.66 -0.09 1 | -5.62 2.60 11
| 0.00 -2.80 2.19 14 |
2000.0 | 0.00 0.93 -0.09 1 | -9.40 2.60 11
| 0.00 -5.44 2.60 11 |
2250.0 | 0.00 1.20 -0.09 1 | -11.44 2.60 11
| 0.00 -8.02 2.60 11 |
2500.0 | 0.00 1.47 -0.09 1 | -13.25 2.60 11
| 0.00 -11.13 2.60 11 |
2750.0 | 0.00 1.74 -0.09 1 | -15.17 2.60 11
| 0.00 -14.71 2.60 11 |
3000.0 | 0.00 2.00 -0.09 1 | -16.28 2.60 11
| 0.00 -18.65 2.60 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 775 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 776
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 7.39 MX = 2.60 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -12.94 MX = 2.60 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 553 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3150.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.35 -0.37 1 | 19.18 2.86 11
| 0.00 -2.17 2.86 11 |
262.5 | 0.00 2.62 2.86 11 | 17.20 2.86 11
| 0.00 -0.29 0.37 2 |
525.0 | 0.00 6.74 2.86 11 | 13.93 2.86 11
| 0.00 -0.24 0.37 2 |
787.5 | 0.00 9.98 2.86 11 | 10.53 2.86 11
| 0.00 -0.18 0.37 2 |
1050.0 | 0.00 12.26 2.86 11 | 6.89 2.86 11
| 0.00 -0.04 0.12 3 |
1312.5 | 0.00 13.59 2.86 11 | 3.24 2.86 11
| 0.00 -0.07 0.37 2 |
1575.0 | 0.00 11.16 2.74 13 | -0.40 2.86 11
| 0.00 -0.01 0.37 2 |
1837.5 | 0.00 13.38 2.86 11 | -4.05 2.86 11
| 0.00 -0.04 -0.37 1 |
2100.0 | 0.00 9.49 2.43 14 | -7.69 2.86 11
| 0.00 -0.02 -0.12 4 |
2362.5 | 0.00 9.35 2.86 11 | -11.02 2.86 11
| 0.00 -0.16 -0.37 1 |
2625.0 | 0.00 5.98 2.86 11 | -14.46 2.86 11
| 0.00 -0.21 -0.37 1 |
2887.5 | 0.00 1.86 2.86 11 | -16.81 2.86 11
| 0.00 -0.27 -0.37 1 |
3150.0 | 0.00 0.32 0.37 2 | -18.30 2.86 11
| 0.00 -2.77 2.86 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 776 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 777
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 787.5 mm 1575.0 mm 2362.5 mm 3150.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 555 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 24.50 -0.71 11 | -12.44 -1.40 13
| 0.00 -0.61 0.69 1 |
158.3 | 0.00 22.18 -0.71 11 | -13.91 -1.40 13
| 0.00 -0.42 0.69 1 |
316.7 | 0.00 19.52 -0.71 11 | -15.76 -1.40 13
| 0.00 -0.02 0.06 7 |
475.0 | 0.00 16.49 -0.71 11 | -17.29 -1.40 13
| 0.00 -0.05 0.69 1 |
633.3 | 0.00 13.02 -0.71 11 | -19.53 -1.40 13
| 0.00 -0.14 -0.69 2 |
791.7 | 0.00 6.91 -1.40 13 | -22.13 -1.40 13
| 0.00 -0.25 -0.19 3 |
950.0 | 0.00 4.84 -0.71 11 | -24.21 -1.40 13
| 0.00 -0.39 -0.19 3 |
1108.3 | 0.00 0.92 0.89 20 | -30.85 -0.71 11
| 0.00 -0.73 -1.40 13 |
1266.7 | 0.00 0.90 0.69 1 | -33.41 -0.71 11
| 0.00 -5.00 -1.40 13 |
1425.0 | 0.00 1.09 0.69 1 | -34.46 -0.71 11
| 0.00 -9.52 -1.40 13 |
1583.3 | 0.00 1.27 0.69 1 | -36.00 -0.71 11
| 0.00 -15.90 -0.71 11 |
1741.7 | 0.00 1.46 0.69 1 | -37.35 -0.71 11
| 0.00 -21.73 -0.71 11 |
1900.0 | 0.00 1.65 0.69 1 | -38.15 -0.71 11
| 0.00 -27.72 -0.71 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 777 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 778
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -33.20 MX = -0.71 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 556 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1900.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 778 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 779
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 24.35 1.34 11 | 3.21 1.45 12
| 0.00 -0.61 0.32 1 |
158.3 | 0.00 19.76 1.17 15 | 2.67 1.45 12
| 0.00 -0.01 0.08 4 |
316.7 | 0.00 24.96 1.34 11 | 1.86 1.45 12
| 0.00 -0.33 0.32 1 |
475.0 | 0.00 25.05 1.34 11 | 1.10 1.45 12
| 0.00 -0.02 -0.08 3 |
633.3 | 0.00 24.97 1.34 11 | -1.02 1.34 11
| 0.00 -0.04 -0.08 3 |
791.7 | 0.00 19.75 1.11 16 | -2.77 1.34 11
| 0.00 -0.06 -0.08 3 |
950.0 | 0.00 24.14 1.34 11 | -4.10 1.34 11
| 0.00 -0.24 -0.32 2 |
1108.3 | 0.00 23.37 1.34 11 | -5.43 1.34 11
| 0.00 -0.38 -0.32 2 |
1266.7 | 0.00 18.52 1.45 12 | -7.18 1.34 11
| 0.00 -0.11 -0.08 3 |
1425.0 | 0.00 21.16 1.34 11 | -8.23 1.34 11
| 0.00 -0.67 -0.32 2 |
1583.3 | 0.00 19.77 1.34 11 | -9.18 1.34 11
| 0.00 -0.81 -0.32 2 |
1741.7 | 0.00 18.23 1.34 11 | -10.19 1.34 11
| 0.00 -0.95 -0.32 2 |
1900.0 | 0.00 16.56 1.34 11 | -10.86 1.34 11
| 0.00 -1.09 -0.32 2 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 475.0 mm 950.0 mm 1425.0 mm 1900.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
============================================================================
============================================================================
B E A M N O. 557 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 325.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 779 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 780
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.41 -4.28 2 | -97.22 -29.45 11
| 0.00 -22.63 -29.45 11 |
27.1 | 0.00 0.26 -4.28 2 | -97.41 -29.45 11
| 0.00 -25.27 -29.45 11 |
54.2 | 0.00 0.11 -4.28 2 | -97.52 -29.45 11
| 0.00 -22.33 -23.70 18 |
81.3 | 0.00 0.05 4.28 1 | -97.71 -29.45 11
| 0.00 -30.55 -29.45 11 |
108.3 | 0.00 0.01 0.39 7 | -97.91 -29.45 11
| 0.00 -33.20 -29.45 11 |
135.4 | 0.00 0.31 1.72 4 | -98.02 -29.45 11
| 0.00 -29.10 -28.69 13 |
162.5 | 0.00 0.36 1.72 4 | -98.21 -29.45 11
| 0.00 -38.51 -29.45 11 |
189.6 | 0.00 0.65 4.28 1 | -98.41 -29.45 11
| 0.00 -33.72 -28.69 13 |
216.7 | 0.00 0.81 4.28 1 | -98.51 -29.45 11
| 0.00 -43.84 -29.45 11 |
243.8 | 0.00 0.96 4.28 1 | -98.71 -29.45 11
| 0.00 -46.51 -29.45 11 |
270.8 | 0.00 1.11 4.28 1 | -98.90 -29.45 11
| 0.00 -49.18 -29.45 11 |
297.9 | 0.00 1.26 4.28 1 | -99.01 -29.45 11
| 0.00 -51.86 -29.45 11 |
325.0 | 0.00 1.41 4.28 1 | -99.21 -29.45 11
| 0.00 -54.55 -29.45 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 418.47 469.13 521.05 574.29 628.94
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 186.21 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 81.3 mm 162.5 mm 243.8 mm 325.0 mm
----------------------------------------------------------------------------
TOP 4-12í 5-12í 5-12í 6-12í 6-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c @ 120 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT669.0 mm AWAY FROM START SUPPORT
VY = 44.26 MX = -29.45 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 780 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 781
============================================================================
B E A M N O. 559 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3175.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 17.84 -0.21 1 | 46.20 -0.04 13
| 0.00 -57.28 -0.04 13 |
264.6 | 0.00 3.93 -0.22 4 | 44.54 -0.04 13
| 0.00 -45.26 -0.04 13 |
529.2 | 0.00 12.64 -0.21 1 | 41.79 -0.04 13
| 0.00 -33.77 -0.04 13 |
793.8 | 0.00 10.05 -0.21 1 | 39.55 -0.04 13
| 0.00 -22.96 0.14 21 |
1058.3 | 0.00 7.60 -0.48 20 | 35.04 -0.04 13
| 0.00 -13.21 -0.04 13 |
1322.9 | 0.00 7.36 -0.48 20 | 30.75 -0.04 13
| 0.00 -7.21 0.14 21 |
1587.5 | 0.00 8.33 -0.53 12 | 25.59 -0.04 13
| 0.00 -2.26 0.21 2 |
1852.1 | 0.00 10.78 -0.36 11 | 21.32 0.14 21
| 0.00 -0.33 -0.21 1 |
2116.7 | 0.00 13.96 -0.04 13 | 19.39 0.14 21
| 0.00 -2.93 -0.21 1 |
2381.2 | 0.00 17.86 -0.04 13 | 16.77 0.14 21
| 0.00 -5.53 -0.21 1 |
2645.8 | 0.00 20.96 -0.04 13 | -14.00 -0.48 20
| 0.00 -8.12 -0.21 1 |
2910.4 | 0.00 23.91 0.14 21 | -15.24 -0.53 12
| 0.00 -10.72 -0.21 1 |
3175.0 | 0.00 27.52 0.14 21 | -16.27 -0.53 12
| 0.00 -13.31 -0.21 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 332.49 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 793.8 mm 1587.5 mm 2381.2 mm 3175.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 781 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 782
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = 16.17 MX = 0.14 LD= 21
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 561 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 2950.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 1.90 0.34 1 | 21.50 -1.03 11
| 0.00 -18.85 -1.03 11 |
245.8 | 0.00 1.65 0.34 1 | 20.41 -1.03 11
| 0.00 -13.70 -1.03 11 |
491.7 | 0.00 1.39 0.34 1 | 18.53 -1.03 11
| 0.00 -8.78 -1.23 13 |
737.5 | 0.00 1.14 0.34 1 | 16.77 -1.03 11
| 0.00 -4.98 -1.23 13 |
983.3 | 0.00 1.22 -0.01 20 | 14.78 -1.03 11
| 0.00 -1.43 -1.03 21 |
1229.2 | 0.00 2.54 -1.03 11 | 10.13 -1.23 13
| 0.00 -0.63 -0.34 2 |
1475.0 | 0.00 3.55 -1.23 13 | 8.00 -1.23 13
| 0.00 -0.37 -0.34 2 |
1720.8 | 0.00 5.34 -0.88 17 | 5.87 -1.23 13
| 0.00 -0.27 -0.13 3 |
1966.7 | 0.00 7.63 -1.03 11 | 2.93 -1.23 13
| 0.00 -0.24 -0.13 3 |
2212.5 | 0.00 7.94 -1.03 11 | 1.34 -1.23 13
| 0.00 -0.39 0.34 1 |
2458.3 | 0.00 7.72 -1.03 11 | -1.64 -1.03 11
| 0.00 -0.65 0.34 1 |
2704.2 | 0.00 6.73 -1.23 13 | -3.52 -1.03 11
| 0.00 -0.90 0.34 1 |
2950.0 | 0.00 6.23 -1.23 13 | -4.61 -1.03 11
| 0.00 -1.15 0.34 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 782 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 783
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 737.5 mm 1475.0 mm 2212.5 mm 2950.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 18.37 MX = -1.03 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = 0.22 MX = -1.23 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 562 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 275.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.23 1.05 1 | -106.17 36.23 11
| 0.00 -5.10 36.23 11 |
22.9 | 0.00 0.21 1.05 1 | -106.32 36.23 11
| 0.00 -7.54 36.23 11 |
45.8 | 0.00 0.02 0.10 7 | -106.41 36.23 11
| 0.00 -9.97 36.23 11 |
68.8 | 0.00 0.18 1.05 1 | -106.56 36.23 11
| 0.00 -9.71 30.24 12 |
91.7 | 0.00 0.17 1.05 1 | -106.69 36.23 11
| 0.00 -11.87 29.11 16 |
114.6 | 0.00 0.15 1.05 1 | -106.78 36.23 11
| 0.00 -13.66 30.24 12 |
137.5 | 0.00 0.13 1.05 1 | -106.91 36.23 11
| 0.00 -19.75 36.23 11 |
160.4 | 0.00 0.12 1.05 1 | -107.03 36.23 11
| 0.00 -22.20 36.23 11 |
183.3 | 0.00 0.10 1.05 1 | -107.12 36.23 11
| 0.00 -19.72 29.11 16 |
206.2 | 0.00 0.09 1.05 1 | -107.23 36.23 11
| 0.00 -27.11 36.23 11 |
229.2 | 0.00 0.07 1.05 1 | -107.33 36.23 11
| 0.00 -29.57 36.23 11 |
252.1 | 0.00 0.05 1.05 1 | -107.42 36.23 11
| 0.00 -32.03 36.23 11 |
275.0 | 0.00 0.04 1.05 1 | -107.52 36.23 11
| 0.00 -34.50 36.23 11 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 783 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 784
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 68.8 mm 137.5 mm 206.2 mm 275.0 mm
----------------------------------------------------------------------------
TOP 380.57 347.74 474.25 522.60 572.01
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 326.04 238.68 237.65 194.24 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 68.8 mm 137.5 mm 206.2 mm 275.0 mm
----------------------------------------------------------------------------
TOP 3-16í 3-16í 3-16í 3-16í 3-16í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í 2 legged 10í
REINF. @ 100 mm c/c @ 100 mm c/c @ 100 mm c/c @ 100 mm c/c @ 100 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 667.0 mm AWAY FROM START SUPPORT
VY = 1455.72 MX = 36.23 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 563 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 450.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 784 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 785
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.21 0.00 4 | -96.96 6.20 11
| 0.00 -18.73 6.20 11 |
37.5 | 0.00 0.21 0.00 4 | -97.27 6.20 11
| 0.00 -22.37 6.20 11 |
75.0 | 0.00 0.01 -0.00 10 | -97.43 6.20 11
| 0.00 -21.06 4.96 14 |
112.5 | 0.00 0.21 0.00 4 | -97.75 6.20 11
| 0.00 -29.68 6.20 11 |
150.0 | 0.00 0.14 0.03 1 | -98.06 6.20 11
| 0.00 -33.35 6.20 11 |
187.5 | 0.00 0.21 0.00 4 | -98.21 6.20 11
| 0.00 -37.03 6.20 11 |
225.0 | 0.00 0.21 0.00 4 | -98.53 6.20 11
| 0.00 -40.72 6.20 11 |
262.5 | 0.00 0.21 0.00 4 | -98.85 6.20 11
| 0.00 -44.42 6.20 11 |
300.0 | 0.00 0.15 0.03 1 | -99.00 6.20 11
| 0.00 -48.13 6.20 11 |
337.5 | 0.00 0.16 0.03 1 | -99.31 6.20 11
| 0.00 -51.85 6.20 11 |
375.0 | 0.00 0.16 0.03 1 | -99.63 6.20 11
| 0.00 -55.58 6.20 11 |
412.5 | 0.00 0.17 0.03 1 | -99.78 6.20 11
| 0.00 -59.32 6.20 11 |
450.0 | 0.00 0.17 0.03 1 | -100.09 6.20 11
| 0.00 -63.07 6.20 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 178.08 227.24 293.35 361.58 432.11
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 112.5 mm 225.0 mm 337.5 mm 450.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 4-12í 4-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 26.69 MX = 6.20 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 785 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 786
============================================================================
B E A M N O. 564 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.00 0.34 2 | 26.48 -1.19 11
| 0.00 -16.02 -1.19 11 |
250.0 | 0.00 0.00 0.34 2 | 24.07 -1.19 11
| 0.00 -9.63 -1.19 11 |
500.0 | 0.00 0.00 0.16 3 | 21.78 -1.19 11
| 0.00 -3.91 -1.19 11 |
750.0 | 0.00 0.77 -1.36 12 | 16.88 -1.19 11
| 0.00 -0.01 -0.34 1 |
1000.0 | 0.00 4.80 -1.19 11 | 13.29 -1.19 11
| 0.00 -0.01 -0.34 1 |
1250.0 | 0.00 5.88 -1.14 15 | 7.52 -1.19 11
| 0.00 -0.01 -0.34 1 |
1500.0 | 0.00 6.80 -1.36 12 | 1.97 -1.36 12
| 0.00 -0.00 -0.01 10 |
1750.0 | 0.00 8.14 -1.19 11 | -3.42 -1.36 12
| 0.00 -0.01 -0.34 1 |
2000.0 | 0.00 5.12 -1.36 12 | -8.50 -1.19 11
| 0.00 -0.01 -0.16 4 |
2250.0 | 0.00 3.54 -1.19 11 | -14.45 -1.19 11
| 0.00 -0.02 -0.34 1 |
2500.0 | 0.00 0.02 0.34 2 | -17.17 -1.19 11
| 0.00 -0.29 -1.36 12 |
2750.0 | 0.00 0.02 0.34 2 | -19.93 -1.19 11
| 0.00 -4.94 -1.19 11 |
3000.0 | 0.00 0.02 0.34 2 | -21.44 -1.19 11
| 0.00 -10.10 -1.19 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 786 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 787
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -15.34 MX = -1.19 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 565 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3350.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.24 1.72 13 | 5.58 1.72 13
| 0.00 -1.32 -0.55 1 |
279.2 | 0.00 7.66 1.72 13 | 4.58 1.72 13
| 0.00 -1.13 -0.55 1 |
558.3 | 0.00 8.70 1.72 13 | 2.86 1.72 13
| 0.00 -0.94 -0.55 1 |
837.5 | 0.00 10.48 1.33 11 | 1.24 1.72 13
| 0.00 -0.75 -0.55 1 |
1116.7 | 0.00 10.76 1.33 11 | -1.73 1.72 13
| 0.00 -0.55 -0.55 1 |
1395.8 | 0.00 10.11 1.33 11 | -3.97 1.72 13
| 0.00 -0.14 0.02 4 |
1675.0 | 0.00 8.46 1.33 11 | -7.15 1.72 13
| 0.00 -0.17 -0.55 1 |
1954.2 | 0.00 5.70 1.33 11 | -10.33 1.72 13
| 0.00 -0.02 0.55 2 |
2233.3 | 0.00 1.29 1.72 13 | -12.57 1.72 13
| 0.00 -0.22 0.55 2 |
2512.5 | 0.00 0.41 -0.55 1 | -18.40 1.33 11
| 0.00 -2.70 1.72 13 |
2791.7 | 0.00 0.60 -0.55 1 | -20.42 1.33 11
| 0.00 -8.18 1.33 11 |
3070.8 | 0.00 0.79 -0.55 1 | -22.57 1.33 11
| 0.00 -14.19 1.33 11 |
3350.0 | 0.00 0.98 -0.55 1 | -23.81 1.33 11
| 0.00 -20.67 1.33 11 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 787 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 788
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 837.5 mm 1675.0 mm 2512.5 mm 3350.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 2.97 MX = 1.72 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM END SUPPORT
VY = -19.60 MX = 1.33 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 566 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 0.07 15.04 20 | -59.65 18.11 12
| 0.00 -0.97 18.11 12 |
18.8 | 0.00 0.52 4.49 1 | -59.74 18.11 12
| 0.00 -2.41 15.26 15 |
37.5 | 0.00 0.45 4.49 1 | -59.80 18.11 12
| 0.00 -4.69 15.90 11 |
56.3 | 0.00 0.19 2.12 4 | -59.89 18.11 12
| 0.00 -4.33 18.11 12 |
75.0 | 0.00 0.31 4.49 1 | -59.97 18.11 12
| 0.00 -7.29 15.90 11 |
93.8 | 0.00 0.24 4.49 1 | -60.03 18.11 12
| 0.00 -6.58 18.11 12 |
112.5 | 0.00 0.17 4.49 1 | -60.11 18.11 12
| 0.00 -7.71 18.11 12 |
131.3 | 0.00 0.10 4.49 1 | -60.18 18.11 12
| 0.00 -8.84 18.11 12 |
150.0 | 0.00 0.03 4.49 1 | -60.24 18.11 12
| 0.00 -9.97 18.11 12 |
168.8 | 0.00 0.04 -4.49 2 | -60.31 18.11 12
| 0.00 -11.10 18.11 12 |
187.5 | 0.00 0.11 -4.49 2 | -60.38 18.11 12
| 0.00 -12.23 18.11 12 |
206.3 | 0.00 0.18 -4.49 2 | -60.44 18.11 12
| 0.00 -13.36 18.11 12 |
225.0 | 0.00 0.25 -4.49 2 | -60.50 18.11 12
| 0.00 -14.49 18.11 12 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 788 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 789
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 178.50 193.02 212.78 232.75 252.92
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 308.85 178.50 178.50 178.50 178.50
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 56.3 mm 112.5 mm 168.8 mm 225.0 mm
----------------------------------------------------------------------------
TOP 3-10í 3-10í 3-10í 3-10í 4-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 4-10í 3-10í 3-10í 3-10í 3-10í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 130 mm c/c @ 130 mm c/c @ 130 mm c/c @ 130 mm c/c @ 135 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 670.0 mm AWAY FROM START SUPPORT
VY = 1029.13 MX = 15.90 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 567 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3225.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 789 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 790
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 6.46 0.41 1 | 51.23 -1.10 11
| 0.00 -55.18 -1.10 11 |
268.8 | 0.00 5.33 0.41 1 | 49.76 -1.10 11
| 0.00 -39.69 -1.37 13 |
537.5 | 0.00 4.19 0.41 1 | 46.43 -1.10 11
| 0.00 -28.68 -1.10 11 |
806.2 | 0.00 3.06 0.41 1 | 43.50 -1.10 11
| 0.00 -16.58 -1.10 11 |
1075.0 | 0.00 0.16 0.06 4 | 38.72 -1.10 11
| 0.00 -5.64 -1.19 21 |
1343.8 | 0.00 4.01 -1.10 11 | 31.35 -1.37 13
| 0.00 -0.07 -0.04 8 |
1612.5 | 0.00 11.95 -1.10 11 | 26.18 -1.37 13
| 0.00 -0.35 0.41 1 |
1881.3 | 0.00 18.20 -1.10 11 | 21.94 -1.37 13
| 0.00 -1.48 0.41 1 |
2150.0 | 0.00 22.86 -1.10 11 | 16.02 -1.37 13
| 0.00 -2.62 0.41 1 |
2418.8 | 0.00 26.16 -1.10 11 | 13.26 -1.37 13
| 0.00 -3.76 0.41 1 |
2687.5 | 0.00 28.64 -1.37 13 | 10.92 -1.37 13
| 0.00 -4.89 0.41 1 |
2956.2 | 0.00 31.18 -1.37 13 | 8.38 -1.37 13
| 0.00 -6.03 0.41 1 |
3225.0 | 0.00 33.29 -1.37 13 | 7.31 -1.37 13
| 0.00 -7.16 0.41 1 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 330.31 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 201.62
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 806.2 mm 1612.5 mm 2418.8 mm 3225.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 669.0 mm AWAY FROM START SUPPORT
VY = 46.02 MX = -1.10 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 790 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 791
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = 10.95 MX = -1.37 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 570 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 16.52 -0.11 22 | 33.55 0.06 15
| 0.00 -19.88 0.10 23 |
250.0 | 0.00 17.65 -0.11 22 | 28.88 0.06 15
| 0.00 -12.68 0.10 23 |
500.0 | 0.00 18.50 -0.11 14 | 24.22 0.06 15
| 0.00 -8.09 0.07 4 |
750.0 | 0.00 19.12 -0.11 14 | 20.04 0.10 23
| 0.00 -1.25 -0.88 1 |
1000.0 | 0.00 17.15 -0.03 11 | 16.55 0.10 23
| 0.00 -4.05 0.07 4 |
1250.0 | 0.00 16.87 -0.11 14 | 13.05 0.10 23
| 0.00 -2.02 0.07 4 |
1500.0 | 0.00 17.49 -0.03 11 | -14.70 -0.11 22
| 0.00 -0.06 -0.88 1 |
1750.0 | 0.00 15.47 -0.03 11 | -18.49 -0.11 14
| 0.00 -0.11 0.00 9 |
2000.0 | 0.00 13.22 0.10 23 | -23.15 -0.11 14
| 0.00 -0.73 0.88 2 |
2250.0 | 0.00 13.42 0.10 23 | -27.81 -0.11 14
| 0.00 -6.06 -0.07 3 |
2500.0 | 0.00 12.75 0.10 23 | -32.47 -0.11 14
| 0.00 -11.50 -0.11 22 |
2750.0 | 0.00 11.21 0.10 23 | -37.13 -0.11 14
| 0.00 -19.11 -0.11 22 |
3000.0 | 0.00 12.13 0.07 4 | -41.79 -0.11 14
| 0.00 -27.72 -0.11 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 791 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 792
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 23.48 MX = 0.06 LD= 15
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -31.73 MX = -0.11 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 573 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 17.04 -0.00 22 | 31.94 -0.12 15
| 0.00 -16.48 -0.08 23 |
250.0 | 0.00 18.68 -0.06 14 | 27.28 -0.12 15
| 0.00 -9.66 -0.08 23 |
500.0 | 0.00 18.70 -0.00 22 | 22.62 -0.12 15
| 0.00 -2.34 -0.74 1 |
750.0 | 0.00 21.11 -0.06 14 | 18.55 -0.08 23
| 0.00 -5.62 -0.03 4 |
1000.0 | 0.00 20.57 -0.06 14 | 15.06 -0.08 23
| 0.00 -3.77 -0.03 4 |
1250.0 | 0.00 20.71 -0.11 11 | 11.56 -0.08 23
| 0.00 -0.76 -0.74 1 |
1500.0 | 0.00 15.65 -0.97 12 | -14.16 -0.00 22
| 0.00 -0.23 -0.74 1 |
1750.0 | 0.00 17.64 -0.11 11 | -18.46 -0.06 14
| 0.00 -1.79 0.03 3 |
2000.0 | 0.00 15.51 -0.12 15 | -23.12 -0.06 14
| 0.00 -3.64 0.03 3 |
2250.0 | 0.00 13.59 -0.12 15 | -27.78 -0.06 14
| 0.00 -5.49 0.03 3 |
2500.0 | 0.00 12.43 -0.08 23 | -32.45 -0.06 14
| 0.00 -9.61 -0.00 22 |
2750.0 | 0.00 10.51 -0.08 23 | -37.11 -0.06 14
| 0.00 -17.08 -0.00 22 |
3000.0 | 0.00 11.05 -0.03 4 | -41.77 -0.06 14
| 0.00 -25.68 -0.06 14 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 792 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 793
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 21.88 MX = -0.12 LD= 15
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -31.70 MX = -0.06 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 576 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 793 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 794
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 16.50 -0.01 22 | 30.96 -0.17 15
| 0.00 -15.13 -0.13 23 |
250.0 | 0.00 17.87 -0.01 22 | 26.30 -0.17 15
| 0.00 -8.80 -0.04 4 |
500.0 | 0.00 18.36 -0.01 22 | 21.64 -0.17 15
| 0.00 -7.06 -0.04 4 |
750.0 | 0.00 18.42 -0.16 11 | 17.63 -0.13 23
| 0.00 -2.02 -0.72 1 |
1000.0 | 0.00 20.59 -0.08 14 | 14.14 -0.13 23
| 0.00 -1.43 -0.72 1 |
1250.0 | 0.00 20.89 -0.16 11 | 10.64 -0.13 23
| 0.00 -0.85 -0.72 1 |
1500.0 | 0.00 19.94 -0.16 11 | -13.73 -0.08 14
| 0.00 -0.00 0.00 9 |
1750.0 | 0.00 16.01 -0.17 15 | -18.40 -0.08 14
| 0.00 -1.65 0.04 3 |
2000.0 | 0.00 15.01 -0.17 15 | -23.06 -0.08 14
| 0.00 -0.89 0.72 2 |
2250.0 | 0.00 12.85 -0.17 15 | -27.72 -0.08 14
| 0.00 -5.14 0.04 3 |
2500.0 | 0.00 11.47 -0.13 23 | -32.38 -0.08 14
| 0.00 -9.17 -0.01 22 |
2750.0 | 0.00 9.33 -0.13 23 | -37.04 -0.08 14
| 0.00 -16.55 -0.01 22 |
3000.0 | 0.00 10.37 -0.04 4 | -41.67 -0.16 11
| 0.00 -25.52 -0.08 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 20.89 MX = -0.17 LD= 15
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 794 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 795
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -31.63 MX = -0.08 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 579 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 15.31 -0.13 14 | 24.79 -0.98 12
| 0.00 -12.76 -0.11 23 |
250.0 | 0.00 18.39 -0.13 14 | 20.13 -0.98 12
| 0.00 -7.84 -0.02 4 |
500.0 | 0.00 15.94 -0.19 11 | 15.47 -0.98 12
| 0.00 -6.29 -0.02 4 |
750.0 | 0.00 21.05 -0.13 14 | 10.26 -1.13 20
| 0.00 -1.99 -0.70 1 |
1000.0 | 0.00 20.64 -0.13 14 | 6.76 -1.13 20
| 0.00 -3.20 -0.02 4 |
1250.0 | 0.00 21.35 -0.19 11 | 3.26 -1.13 20
| 0.00 -0.86 -0.70 1 |
1500.0 | 0.00 20.23 -0.19 11 | -13.32 -0.13 14
| 0.00 -0.01 0.01 7 |
1750.0 | 0.00 14.09 -0.16 17 | -17.98 -0.13 14
| 0.00 -0.27 0.70 2 |
2000.0 | 0.00 11.91 -0.98 12 | -22.64 -0.13 14
| 0.00 -3.00 0.02 3 |
2250.0 | 0.00 11.98 -0.17 15 | -27.30 -0.13 14
| 0.00 -4.55 0.02 3 |
2500.0 | 0.00 10.13 -0.11 23 | -31.96 -0.13 14
| 0.00 -8.15 -0.05 22 |
2750.0 | 0.00 7.61 -0.11 23 | -36.49 -0.19 11
| 0.00 -15.31 -0.05 22 |
3000.0 | 0.00 9.19 -0.02 4 | -42.32 -0.19 11
| 0.00 -24.65 -0.13 14 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 795 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 796
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 14.73 MX = -0.98 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -31.22 MX = -0.13 LD= 14
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 582 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 12.54 -0.11 14 | 26.96 -0.08 11
| 0.00 -6.32 0.02 23 |
250.0 | 0.00 13.42 -0.08 22 | 19.08 -0.43 12
| 0.00 -4.83 0.03 4 |
500.0 | 0.00 18.69 -0.11 14 | 14.42 -0.43 12
| 0.00 -1.98 -0.30 1 |
750.0 | 0.00 20.66 -0.08 11 | 9.76 -0.43 12
| 0.00 -2.91 0.03 4 |
1000.0 | 0.00 22.31 -0.08 11 | 8.80 0.02 23
| 0.00 -1.07 -0.30 1 |
1250.0 | 0.00 18.74 0.30 13 | -6.35 -0.11 14
| 0.00 -0.62 -0.30 1 |
1500.0 | 0.00 17.18 0.30 13 | -11.01 -0.11 14
| 0.00 -0.00 0.04 7 |
1750.0 | 0.00 18.50 -0.08 11 | -15.67 -0.11 14
| 0.00 -0.28 0.30 2 |
2000.0 | 0.00 12.33 -0.43 12 | -20.33 -0.11 14
| 0.00 -1.90 -0.03 3 |
2250.0 | 0.00 10.37 -0.03 15 | -25.47 -0.08 11
| 0.00 -2.86 -0.03 3 |
2500.0 | 0.00 6.95 0.02 23 | -31.30 -0.08 11
| 0.00 -4.51 -0.08 22 |
2750.0 | 0.00 4.78 0.03 4 | -37.13 -0.08 11
| 0.00 -11.32 -0.11 14 |
3000.0 | 0.00 5.74 0.03 4 | -42.95 -0.08 11
| 0.00 -20.48 -0.11 14 |
----------------------------------------------------------------------------
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 796 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 797
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = 13.67 MX = -0.43 LD= 12
Provide 2 Legged 8í @ 150 mm c/c
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -30.37 MX = -0.08 LD= 11
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
============================================================================
B E A M N O. 585 D E S I G N R E S U L TS
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3000.0 mm SIZE: 250.0 mm X 450.0 mmCOVER: 25.0 mm
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 797 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 798
DESIGN LOAD SUMMARY (KN MET)
----------------------------------------------------------------------------
SECTION |FLEXURE (Maxm. Sagging/Hogging moments)| SHEAR
(in mm) | P MZ MX Load Case | VY MX Load Case
----------------------------------------------------------------------------
0.0 | 0.00 9.97 -0.73 13 | 2.16 1.26 20
| 0.00 -1.26 0.77 1 |
250.0 | 0.00 10.36 0.24 11 | 1.56 1.26 20
| 0.00 -0.99 0.77 1 |
500.0 | 0.00 8.79 -0.73 13 | 0.96 1.26 20
| 0.00 -0.50 -0.14 3 |
750.0 | 0.00 7.91 -0.73 13 | -2.84 -1.04 21
| 0.00 -0.46 0.77 1 |
1000.0 | 0.00 8.25 0.24 11 | -3.44 -1.04 21
| 0.00 -0.19 0.77 1 |
1250.0 | 0.00 5.73 1.11 12 | -4.04 -1.04 21
| 0.00 -0.29 -0.14 3 |
1500.0 | 0.00 5.59 0.24 11 | -4.63 -1.04 21
| 0.00 -0.23 -0.14 3 |
1750.0 | 0.00 3.85 1.11 12 | -5.23 -1.04 21
| 0.00 -0.61 -0.77 2 |
2000.0 | 0.00 2.61 1.11 12 | -7.92 -0.73 13
| 0.00 -0.08 0.01 10 |
2250.0 | 0.00 1.76 1.26 20 | -8.72 -0.73 13
| 0.00 -1.68 -1.04 21 |
2500.0 | 0.00 0.88 1.26 20 | -9.52 -0.73 13
| 0.00 -3.36 -1.04 21 |
2750.0 | 0.00 1.68 0.77 1 | -10.31 -0.73 13
| 0.00 -6.34 -0.73 13 |
3000.0 | 0.00 1.95 0.77 1 | -11.11 -0.73 13
| 0.00 -9.02 -0.73 13 |
----------------------------------------------------------------------------
SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 178.08 178.08 178.08 178.08 178.08
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------
SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 750.0 mm 1500.0 mm 2250.0 mm 3000.0 mm
----------------------------------------------------------------------------
TOP 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
BOTTOM 3-12í 3-12í 3-12í 3-12í 3-12í
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)
SHEAR 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í 2 legged 8í
REINF. @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c @ 150 mm c/c
----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM START SUPPORT
VY = -2.34 MX = -1.04 LD= 21
Provide 2 Legged 8í @ 150 mm c/c
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 798 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 799
SHEAR DESIGN RESULTS AT 544.0 mm AWAY FROM END SUPPORT
VY = -9.39 MX = -0.73 LD= 13
Provide 2 Legged 8í @ 150 mm c/c
============================================================================
********************END OF BEAM DESIGN RESULTS********************
344. DESIGN COLUMN 40 TO 58 293 TO 406 568 569 571 572 574 575 577 578 580 581 -
345. 583 584
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 799 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 800
============================================================================
C O L U M N N O. 40 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 13 END JOINT: 35 SHORT COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : 1956.20
About Z About Y
INITIAL MOMENTS : 112.61 2.35
MOMENTS DUE TO MINIMUM ECC. : 39.12 39.12
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 112.61 39.12
REQD. STEEL AREA : 3000.00 Sq.mm.
REQD. CONCRETE AREA: 122000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 20 dia. (3.02%, 3769.91 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 250 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2772.00 Muz1 : 154.66 Muy1 : 65.21
INTERACTION RATIO: 0.95 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 35 Puz : 3050.32 Muz : 200.00 Muy : 80.18 IR: 0.66
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 800 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 801
============================================================================
C O L U M N N O. 41 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 36 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -189.22
About Z About Y
INITIAL MOMENTS : 59.57 0.14
MOMENTS DUE TO MINIMUM ECC. : 3.78 3.78
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 59.57 3.78
REQD. STEEL AREA : 1200.00 Sq.mm.
REQD. CONCRETE AREA: 123800.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2121.30 Muz1 : 71.57 Muy1 : 32.69
INTERACTION RATIO: 0.95 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 2
END JOINT: 36 Puz : 2178.12 Muz : 85.20 Muy : 38.15 IR: 0.80
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 801 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 802
============================================================================
C O L U M N N O. 42 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 37 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -33.83
About Z About Y
INITIAL MOMENTS : 2.00 19.99
MOMENTS DUE TO MINIMUM ECC. : 0.68 0.68
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.00 19.99
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.02 Muy1 : 38.50
INTERACTION RATIO: 0.54 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 23
END JOINT: 37 Puz : 2178.12 Muz : 179.19 Muy : 76.74 IR: 0.50
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 802 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 803
============================================================================
C O L U M N N O. 43 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 38 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -25.46
About Z About Y
INITIAL MOMENTS : 1.58 16.49
MOMENTS DUE TO MINIMUM ECC. : 0.51 0.51
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.58 16.49
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.59 Muy1 : 39.16
INTERACTION RATIO: 0.44 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 5 Puz : 2178.12 Muz : 179.20 Muy : 77.54 IR: 0.36
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 803 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 804
============================================================================
C O L U M N N O. 44 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 11 END JOINT: 39 SHORT COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : 1797.92
About Z About Y
INITIAL MOMENTS : 3.05 2.98
MOMENTS DUE TO MINIMUM ECC. : 35.96 35.96
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 35.96 35.96
REQD. STEEL AREA : 1600.00 Sq.mm.
REQD. CONCRETE AREA: 123400.00 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (1.29%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 250 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2265.90 Muz1 : 90.14 Muy1 : 40.31
INTERACTION RATIO: 0.96 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 39 Puz : 2268.97 Muz : 91.91 Muy : 40.57 IR: 0.94
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 804 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 805
============================================================================
C O L U M N N O. 45 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 11 END JOINT: 12 SHORT COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : 1794.59
About Z About Y
INITIAL MOMENTS : 43.42 4.07
MOMENTS DUE TO MINIMUM ECC. : 35.89 35.89
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 43.42 35.89
REQD. STEEL AREA : 1700.00 Sq.mm.
REQD. CONCRETE AREA: 123300.00 Sq.mm.
MAIN REINFORCEMENT : Provide 16 - 12 dia. (1.45%, 1809.56 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2302.05 Muz1 : 98.07 Muy1 : 43.27
INTERACTION RATIO: 0.89 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 12 Puz : 2341.66 Muz : 104.87 Muy : 46.28 IR: 0.79
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 805 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 806
============================================================================
C O L U M N N O. 46 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 41 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -29.38
About Z About Y
INITIAL MOMENTS : 19.49 0.08
MOMENTS DUE TO MINIMUM ECC. : 0.59 0.59
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 19.49 0.59
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.85 Muy1 : 38.86
INTERACTION RATIO: 0.24 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 13 Puz : 2178.12 Muz : 179.55 Muy : 77.56 IR: 0.50
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 806 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 807
============================================================================
C O L U M N N O. 47 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 42 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -54.26
About Z About Y
INITIAL MOMENTS : 17.44 0.73
MOMENTS DUE TO MINIMUM ECC. : 1.09 1.09
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 17.44 1.09
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 81.13 Muy1 : 36.85
INTERACTION RATIO: 0.24 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 42 Puz : 2178.12 Muz : 178.68 Muy : 77.38 IR: 0.25
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 807 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 808
============================================================================
C O L U M N N O. 48 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 43 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -10.05
About Z About Y
INITIAL MOMENTS : 1.59 22.66
MOMENTS DUE TO MINIMUM ECC. : 0.20 0.20
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.59 22.66
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.40 Muy1 : 40.33
INTERACTION RATIO: 0.58 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 43 Puz : 2178.12 Muz : 178.47 Muy : 77.31 IR: 0.62
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 808 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 809
============================================================================
C O L U M N N O. 49 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 44 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -611.65
About Z About Y
INITIAL MOMENTS : 64.36 0.28
MOMENTS DUE TO MINIMUM ECC. : 12.23 12.23
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 64.36 12.23
REQD. STEEL AREA : 2530.96 Sq.mm.
REQD. CONCRETE AREA: 122469.04 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 20 dia. (3.02%, 3769.91 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 250 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2602.44 Muz1 : 102.88 Muy1 : 44.84
INTERACTION RATIO: 0.90 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 2
END JOINT: 44 Puz : 3050.32 Muz : 209.14 Muy : 83.73 IR: 0.45
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 809 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 810
============================================================================
C O L U M N N O. 50 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 45 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -83.59
About Z About Y
INITIAL MOMENTS : 64.91 0.67
MOMENTS DUE TO MINIMUM ECC. : 1.67 1.67
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 64.91 1.67
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 75.34 Muy1 : 34.42
INTERACTION RATIO: 0.91 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 21
END JOINT: 45 Puz : 2178.12 Muz : 163.52 Muy : 70.68 IR: 0.68
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 810 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 811
============================================================================
C O L U M N N O. 51 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 46 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -832.76
About Z About Y
INITIAL MOMENTS : 60.84 1.10
MOMENTS DUE TO MINIMUM ECC. : 16.66 16.66
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 60.84 16.66
REQD. STEEL AREA : 3063.02 Sq.mm.
REQD. CONCRETE AREA: 121936.98 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 20 dia. (3.02%, 3769.91 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 250 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2794.78 Muz1 : 104.74 Muy1 : 45.36
INTERACTION RATIO: 0.95 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 46 Puz : 3050.32 Muz : 200.09 Muy : 80.70 IR: 0.62
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 811 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 812
============================================================================
C O L U M N N O. 52 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 4 END JOINT: 47 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -78.26
About Z About Y
INITIAL MOMENTS : 74.21 2.23
MOMENTS DUE TO MINIMUM ECC. : 1.57 1.57
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 74.21 2.23
REQD. STEEL AREA : 1100.00 Sq.mm.
REQD. CONCRETE AREA: 123900.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2085.15 Muz1 : 85.08 Muy1 : 38.39
INTERACTION RATIO: 0.93 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 23
END JOINT: 47 Puz : 2178.12 Muz : 172.21 Muy : 73.95 IR: 0.79
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 812 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 813
============================================================================
C O L U M N N O. 53 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 48 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -53.80
About Z About Y
INITIAL MOMENTS : 57.44 1.80
MOMENTS DUE TO MINIMUM ECC. : 1.08 1.08
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 57.44 1.80
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 81.22 Muy1 : 36.89
INTERACTION RATIO: 0.76 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 21
END JOINT: 48 Puz : 2178.12 Muz : 172.31 Muy : 74.00 IR: 0.63
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 813 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 814
============================================================================
C O L U M N N O. 54 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 49 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -53.84
About Z About Y
INITIAL MOMENTS : 48.68 0.65
MOMENTS DUE TO MINIMUM ECC. : 1.08 1.08
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 48.68 1.08
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 81.21 Muy1 : 36.88
INTERACTION RATIO: 0.63 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 21
END JOINT: 49 Puz : 2178.12 Muz : 171.78 Muy : 73.77 IR: 0.54
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 814 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 815
============================================================================
C O L U M N N O. 55 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 50 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -77.78
About Z About Y
INITIAL MOMENTS : 53.24 3.83
MOMENTS DUE TO MINIMUM ECC. : 1.56 1.56
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 53.24 3.83
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 76.49 Muy1 : 34.90
INTERACTION RATIO: 0.81 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 50 Puz : 2178.12 Muz : 172.09 Muy : 73.90 IR: 0.61
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 815 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 816
============================================================================
C O L U M N N O. 56 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 4 END JOINT: 51 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -325.72
About Z About Y
INITIAL MOMENTS : 76.79 4.56
MOMENTS DUE TO MINIMUM ECC. : 6.51 6.51
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 76.79 6.51
REQD. STEEL AREA : 1800.00 Sq.mm.
REQD. CONCRETE AREA: 123200.00 Sq.mm.
MAIN REINFORCEMENT : Provide 16 - 12 dia. (1.45%, 1809.56 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2338.20 Muz1 : 96.83 Muy1 : 42.67
INTERACTION RATIO: 0.95 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 4
END JOINT: 51 Puz : 2341.66 Muz : 97.48 Muy : 42.91 IR: 0.94
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 816 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 817
============================================================================
C O L U M N N O. 57 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 12 END JOINT: 52 SHORT COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : 2077.36
About Z About Y
INITIAL MOMENTS : 3.74 23.89
MOMENTS DUE TO MINIMUM ECC. : 41.55 41.55
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 41.55 41.55
REQD. STEEL AREA : 2588.29 Sq.mm.
REQD. CONCRETE AREA: 122411.71 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 20 dia. (3.02%, 3769.91 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 250 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2623.17 Muz1 : 109.10 Muy1 : 46.76
INTERACTION RATIO: 0.94 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 52 Puz : 3050.32 Muz : 279.42 Muy : 107.57 IR: 0.52
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 817 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 818
============================================================================
C O L U M N N O. 58 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1500.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 53 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -50.88
About Z About Y
INITIAL MOMENTS : 1.58 21.22
MOMENTS DUE TO MINIMUM ECC. : 1.02 1.02
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.58 21.22
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 81.78 Muy1 : 37.13
INTERACTION RATIO: 0.59 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 53 Puz : 2178.12 Muz : 173.09 Muy : 74.34 IR: 0.50
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 818 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 819
============================================================================
C O L U M N N O. 293 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 1 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -4.48
About Z About Y
INITIAL MOMENTS : 0.10 0.41
MOMENTS DUE TO MINIMUM ECC. : 0.10 0.09
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.10 0.41
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.38 Muy1 : 40.76
INTERACTION RATIO: 0.01 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 54 Puz : 2178.12 Muz : 179.00 Muy : 77.47 IR: 0.26
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 819 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 820
============================================================================
C O L U M N N O. 294 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 54 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -3.59
About Z About Y
INITIAL MOMENTS : 0.27 0.88
MOMENTS DUE TO MINIMUM ECC. : 0.08 0.07
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.27 0.88
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.54 Muy1 : 40.83
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 88 Puz : 2178.12 Muz : 175.24 Muy : 75.59 IR: 0.40
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 820 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 821
============================================================================
C O L U M N N O. 295 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 88 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.82
About Z About Y
INITIAL MOMENTS : 0.26 0.78
MOMENTS DUE TO MINIMUM ECC. : 0.06 0.06
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.26 0.78
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.67 Muy1 : 40.89
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 122 Puz : 2178.12 Muz : 167.83 Muy : 72.37 IR: 0.45
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 821 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 822
============================================================================
C O L U M N N O. 296 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 122 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.15
About Z About Y
INITIAL MOMENTS : 0.29 0.74
MOMENTS DUE TO MINIMUM ECC. : 0.05 0.04
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.29 0.74
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.79 Muy1 : 40.94
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 156 Puz : 2178.12 Muz : 156.04 Muy : 67.39 IR: 0.49
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 822 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 823
============================================================================
C O L U M N N O. 297 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 156 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.52
About Z About Y
INITIAL MOMENTS : 0.34 0.81
MOMENTS DUE TO MINIMUM ECC. : 0.03 0.03
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.34 0.81
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.89 Muy1 : 40.99
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 190 Puz : 2178.12 Muz : 141.94 Muy : 61.04 IR: 0.57
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 823 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 824
============================================================================
C O L U M N N O. 298 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 190 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.75
About Z About Y
INITIAL MOMENTS : 0.21 1.07
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.02
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.21 1.07
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.03 Muy1 : 41.05
INTERACTION RATIO: 0.03 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 224 Puz : 2178.12 Muz : 125.38 Muy : 54.24 IR: 0.66
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 824 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 825
============================================================================
C O L U M N N O. 299 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 3 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -196.03
About Z About Y
INITIAL MOMENTS : 1.99 0.39
MOMENTS DUE TO MINIMUM ECC. : 4.46 3.92
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.46 3.92
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 52.20 Muy1 : 24.67
INTERACTION RATIO: 0.24 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 3 Puz : 2178.12 Muz : 156.89 Muy : 67.77 IR: 0.31
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 825 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 826
============================================================================
C O L U M N N O. 300 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 56 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -33.26
About Z About Y
INITIAL MOMENTS : 5.11 1.39
MOMENTS DUE TO MINIMUM ECC. : 0.76 0.67
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.11 1.39
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.12 Muy1 : 38.55
INTERACTION RATIO: 0.10 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 90 Puz : 2178.12 Muz : 129.34 Muy : 55.69 IR: 0.33
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 826 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 827
============================================================================
C O L U M N N O. 301 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 90 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -5.56
About Z About Y
INITIAL MOMENTS : 5.22 0.44
MOMENTS DUE TO MINIMUM ECC. : 0.13 0.11
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.22 0.44
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.20 Muy1 : 40.68
INTERACTION RATIO: 0.07 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 124 Puz : 2178.12 Muz : 124.76 Muy : 53.99 IR: 0.43
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 827 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 828
============================================================================
C O L U M N N O. 302 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 124 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.99
About Z About Y
INITIAL MOMENTS : 5.11 0.31
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.02
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.11 0.31
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.98 Muy1 : 41.03
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 158 Puz : 2178.12 Muz : 121.80 Muy : 52.88 IR: 0.50
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 828 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 829
============================================================================
C O L U M N N O. 303 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 158 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.25
About Z About Y
INITIAL MOMENTS : 4.98 0.28
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.98 0.28
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.11 Muy1 : 41.08
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 192 Puz : 2178.12 Muz : 120.49 Muy : 52.38 IR: 0.53
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 829 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 830
============================================================================
C O L U M N N O. 304 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 192 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.23
About Z About Y
INITIAL MOMENTS : 4.99 0.27
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.99 0.27
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.12 Muy1 : 41.09
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 226 Puz : 2178.12 Muz : 116.26 Muy : 50.70 IR: 0.54
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 830 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 831
============================================================================
C O L U M N N O. 305 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 4 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -29.17
About Z About Y
INITIAL MOMENTS : 2.01 6.09
MOMENTS DUE TO MINIMUM ECC. : 0.66 0.58
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.01 6.09
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.89 Muy1 : 38.87
INTERACTION RATIO: 0.18 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 4 Puz : 2178.12 Muz : 156.99 Muy : 68.92 IR: 0.37
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 831 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 832
============================================================================
C O L U M N N O. 306 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 57 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -24.13
About Z About Y
INITIAL MOMENTS : 0.02 5.41
MOMENTS DUE TO MINIMUM ECC. : 0.55 0.48
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.55 5.41
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.84 Muy1 : 39.26
INTERACTION RATIO: 0.14 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 91 Puz : 2178.12 Muz : 173.20 Muy : 74.47 IR: 0.35
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 832 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 833
============================================================================
C O L U M N N O. 307 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 91 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -18.86
About Z About Y
INITIAL MOMENTS : 0.28 5.61
MOMENTS DUE TO MINIMUM ECC. : 0.43 0.38
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.43 5.61
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.81 Muy1 : 39.66
INTERACTION RATIO: 0.15 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 125 Puz : 2178.12 Muz : 175.63 Muy : 75.82 IR: 0.39
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 833 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 834
============================================================================
C O L U M N N O. 308 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 125 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -13.88
About Z About Y
INITIAL MOMENTS : 0.27 5.59
MOMENTS DUE TO MINIMUM ECC. : 0.32 0.28
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.32 5.59
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.71 Muy1 : 40.04
INTERACTION RATIO: 0.14 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 159 Puz : 2178.12 Muz : 165.36 Muy : 71.43 IR: 0.48
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 834 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 835
============================================================================
C O L U M N N O. 309 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 159 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -9.15
About Z About Y
INITIAL MOMENTS : 0.28 5.56
MOMENTS DUE TO MINIMUM ECC. : 0.21 0.18
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.28 5.56
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.57 Muy1 : 40.40
INTERACTION RATIO: 0.14 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 193 Puz : 2178.12 Muz : 148.45 Muy : 63.95 IR: 0.57
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 835 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 836
============================================================================
C O L U M N N O. 310 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 193 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -4.41
About Z About Y
INITIAL MOMENTS : 0.33 5.32
MOMENTS DUE TO MINIMUM ECC. : 0.10 0.09
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.33 5.32
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.40 Muy1 : 40.77
INTERACTION RATIO: 0.13 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 193 Puz : 2178.12 Muz : 131.94 Muy : 56.68 IR: 0.63
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 836 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 837
============================================================================
C O L U M N N O. 311 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 5 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -18.08
About Z About Y
INITIAL MOMENTS : 1.84 2.43
MOMENTS DUE TO MINIMUM ECC. : 0.41 0.36
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.84 2.43
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.95 Muy1 : 39.72
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 58 Puz : 2178.12 Muz : 168.93 Muy : 73.09 IR: 0.31
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 837 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 838
============================================================================
C O L U M N N O. 312 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 58 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -14.36
About Z About Y
INITIAL MOMENTS : 1.97 2.31
MOMENTS DUE TO MINIMUM ECC. : 0.33 0.29
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.97 2.31
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.62 Muy1 : 40.00
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 15
END JOINT: 92 Puz : 2178.12 Muz : 179.24 Muy : 77.55 IR: 0.32
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 838 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 839
============================================================================
C O L U M N N O. 313 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 92 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -10.88
About Z About Y
INITIAL MOMENTS : 1.83 2.60
MOMENTS DUE TO MINIMUM ECC. : 0.25 0.22
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.83 2.60
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.25 Muy1 : 40.27
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 126 Puz : 2178.12 Muz : 175.04 Muy : 75.48 IR: 0.40
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 839 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 840
============================================================================
C O L U M N N O. 314 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 126 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -7.23
About Z About Y
INITIAL MOMENTS : 1.68 2.66
MOMENTS DUE TO MINIMUM ECC. : 0.16 0.14
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.68 2.66
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.91 Muy1 : 40.55
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 160 Puz : 2178.12 Muz : 171.46 Muy : 73.63 IR: 0.48
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 840 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 841
============================================================================
C O L U M N N O. 315 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 160 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -3.65
About Z About Y
INITIAL MOMENTS : 1.09 2.74
MOMENTS DUE TO MINIMUM ECC. : 0.08 0.07
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.09 2.74
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.53 Muy1 : 40.83
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 194 Puz : 2178.12 Muz : 154.61 Muy : 66.76 IR: 0.54
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 841 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 842
============================================================================
C O L U M N N O. 316 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 194 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.71
About Z About Y
INITIAL MOMENTS : 0.81 2.43
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.81 2.43
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.03 Muy1 : 41.05
INTERACTION RATIO: 0.07 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 194 Puz : 2178.12 Muz : 133.76 Muy : 57.40 IR: 0.60
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 842 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 843
============================================================================
C O L U M N N O. 317 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 11 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -33.62
About Z About Y
INITIAL MOMENTS : 0.08 6.07
MOMENTS DUE TO MINIMUM ECC. : 0.77 0.67
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.77 6.07
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.05 Muy1 : 38.52
INTERACTION RATIO: 0.17 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 11 Puz : 2178.12 Muz : 117.70 Muy : 52.76 IR: 0.47
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 843 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 844
============================================================================
C O L U M N N O. 318 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 64 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -25.75
About Z About Y
INITIAL MOMENTS : 0.46 5.00
MOMENTS DUE TO MINIMUM ECC. : 0.59 0.52
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.59 5.00
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.53 Muy1 : 39.14
INTERACTION RATIO: 0.13 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 64 Puz : 2178.12 Muz : 148.43 Muy : 65.67 IR: 0.27
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 844 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 845
============================================================================
C O L U M N N O. 319 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 98 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -18.46
About Z About Y
INITIAL MOMENTS : 0.35 4.86
MOMENTS DUE TO MINIMUM ECC. : 0.42 0.37
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.42 4.86
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.88 Muy1 : 39.69
INTERACTION RATIO: 0.13 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 98 Puz : 2178.12 Muz : 169.46 Muy : 73.26 IR: 0.21
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 845 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 846
============================================================================
C O L U M N N O. 320 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 132 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -11.51
About Z About Y
INITIAL MOMENTS : 0.39 4.70
MOMENTS DUE TO MINIMUM ECC. : 0.26 0.23
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.39 4.70
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.14 Muy1 : 40.22
INTERACTION RATIO: 0.12 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 132 Puz : 2178.12 Muz : 179.51 Muy : 77.60 IR: 0.18
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 846 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 847
============================================================================
C O L U M N N O. 321 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 166 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -5.37
About Z About Y
INITIAL MOMENTS : 0.13 3.32
MOMENTS DUE TO MINIMUM ECC. : 0.12 0.11
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.13 3.32
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.23 Muy1 : 40.69
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 200 Puz : 2178.12 Muz : 160.81 Muy : 69.50 IR: 0.19
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 847 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 848
============================================================================
C O L U M N N O. 322 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 200 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.68
About Z About Y
INITIAL MOMENTS : 0.18 0.70
MOMENTS DUE TO MINIMUM ECC. : 0.04 0.03
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.18 0.70
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.87 Muy1 : 40.98
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 200 Puz : 2178.12 Muz : 137.17 Muy : 58.85 IR: 0.18
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 848 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 849
============================================================================
C O L U M N N O. 323 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 12 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.90
About Z About Y
INITIAL MOMENTS : 2.22 8.23
MOMENTS DUE TO MINIMUM ECC. : 0.07 0.06
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.22 8.23
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.66 Muy1 : 40.88
INTERACTION RATIO: 0.23 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 12 Puz : 2178.12 Muz : 120.57 Muy : 54.04 IR: 0.44
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 849 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 850
============================================================================
C O L U M N N O. 324 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 65 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -3.21
About Z About Y
INITIAL MOMENTS : 1.37 7.49
MOMENTS DUE TO MINIMUM ECC. : 0.07 0.06
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.37 7.49
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.60 Muy1 : 40.86
INTERACTION RATIO: 0.20 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 65 Puz : 2178.12 Muz : 150.92 Muy : 66.64 IR: 0.29
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 850 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 851
============================================================================
C O L U M N N O. 325 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 99 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.95
About Z About Y
INITIAL MOMENTS : 1.11 7.19
MOMENTS DUE TO MINIMUM ECC. : 0.07 0.06
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.11 7.19
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.65 Muy1 : 40.88
INTERACTION RATIO: 0.19 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 133 Puz : 2178.12 Muz : 173.32 Muy : 74.47 IR: 0.27
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 851 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 852
============================================================================
C O L U M N N O. 326 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 133 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.69
About Z About Y
INITIAL MOMENTS : 1.07 6.94
MOMENTS DUE TO MINIMUM ECC. : 0.06 0.05
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.07 6.94
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.69 Muy1 : 40.90
INTERACTION RATIO: 0.18 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 167 Puz : 2178.12 Muz : 175.45 Muy : 75.71 IR: 0.30
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 852 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 853
============================================================================
C O L U M N N O. 327 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 167 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.31
About Z About Y
INITIAL MOMENTS : 1.01 5.01
MOMENTS DUE TO MINIMUM ECC. : 0.05 0.05
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.01 5.01
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.76 Muy1 : 40.93
INTERACTION RATIO: 0.13 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 201 Puz : 2178.12 Muz : 159.47 Muy : 68.91 IR: 0.34
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 853 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 854
============================================================================
C O L U M N N O. 328 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 201 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.34
About Z About Y
INITIAL MOMENTS : 1.04 0.06
MOMENTS DUE TO MINIMUM ECC. : 0.03 0.03
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.04 0.06
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.92 Muy1 : 41.00
INTERACTION RATIO: 0.01 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 201 Puz : 2178.12 Muz : 137.48 Muy : 59.00 IR: 0.29
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 854 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 855
============================================================================
C O L U M N N O. 329 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 13 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -26.52
About Z About Y
INITIAL MOMENTS : 18.12 2.49
MOMENTS DUE TO MINIMUM ECC. : 0.60 0.53
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 18.12 2.49
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.39 Muy1 : 39.08
INTERACTION RATIO: 0.27 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 13 Puz : 2178.12 Muz : 178.79 Muy : 77.41 IR: 0.26
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 855 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 856
============================================================================
C O L U M N N O. 330 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 66 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -22.78
About Z About Y
INITIAL MOMENTS : 13.72 2.90
MOMENTS DUE TO MINIMUM ECC. : 0.52 0.46
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 13.72 2.90
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.09 Muy1 : 39.36
INTERACTION RATIO: 0.23 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 21
END JOINT: 100 Puz : 2178.12 Muz : 171.55 Muy : 73.67 IR: 0.29
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 856 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 857
============================================================================
C O L U M N N O. 331 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 100 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -18.37
About Z About Y
INITIAL MOMENTS : 13.88 2.87
MOMENTS DUE TO MINIMUM ECC. : 0.42 0.37
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 13.88 2.87
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.90 Muy1 : 39.70
INTERACTION RATIO: 0.23 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 134 Puz : 2178.12 Muz : 176.81 Muy : 76.58 IR: 0.35
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 857 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 858
============================================================================
C O L U M N N O. 332 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 134 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -14.18
About Z About Y
INITIAL MOMENTS : 13.73 2.82
MOMENTS DUE TO MINIMUM ECC. : 0.32 0.28
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 13.73 2.82
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.66 Muy1 : 40.02
INTERACTION RATIO: 0.23 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 168 Puz : 2178.12 Muz : 175.23 Muy : 75.59 IR: 0.47
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 858 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 859
============================================================================
C O L U M N N O. 333 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 168 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -10.10
About Z About Y
INITIAL MOMENTS : 9.69 2.76
MOMENTS DUE TO MINIMUM ECC. : 0.23 0.20
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 9.69 2.76
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.39 Muy1 : 40.33
INTERACTION RATIO: 0.18 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 202 Puz : 2178.12 Muz : 160.27 Muy : 69.26 IR: 0.58
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 859 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 860
============================================================================
C O L U M N N O. 334 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 202 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -5.03
About Z About Y
INITIAL MOMENTS : 1.89 2.88
MOMENTS DUE TO MINIMUM ECC. : 0.11 0.10
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.89 2.88
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.29 Muy1 : 40.72
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 202 Puz : 2178.12 Muz : 138.34 Muy : 59.40 IR: 0.59
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 860 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 861
============================================================================
C O L U M N N O. 335 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 14 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -45.93
About Z About Y
INITIAL MOMENTS : 13.62 1.31
MOMENTS DUE TO MINIMUM ECC. : 0.92 0.92
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 13.62 1.31
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 82.73 Muy1 : 37.53
INTERACTION RATIO: 0.20 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 14 Puz : 2178.12 Muz : 170.50 Muy : 73.29 IR: 0.28
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 861 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 862
============================================================================
C O L U M N N O. 336 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 67 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -35.81
About Z About Y
INITIAL MOMENTS : 7.70 1.39
MOMENTS DUE TO MINIMUM ECC. : 0.72 0.72
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 7.70 1.39
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 84.64 Muy1 : 38.35
INTERACTION RATIO: 0.13 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 67 Puz : 2178.12 Muz : 176.35 Muy : 76.31 IR: 0.39
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 862 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 863
============================================================================
C O L U M N N O. 337 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 101 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -26.16
About Z About Y
INITIAL MOMENTS : 8.17 1.11
MOMENTS DUE TO MINIMUM ECC. : 0.52 0.52
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 8.17 1.11
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.45 Muy1 : 39.11
INTERACTION RATIO: 0.12 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 101 Puz : 2178.12 Muz : 170.98 Muy : 73.45 IR: 0.44
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 863 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 864
============================================================================
C O L U M N N O. 338 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 135 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -16.41
About Z About Y
INITIAL MOMENTS : 7.97 0.54
MOMENTS DUE TO MINIMUM ECC. : 0.33 0.33
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 7.97 0.54
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.25 Muy1 : 39.85
INTERACTION RATIO: 0.10 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 135 Puz : 2178.12 Muz : 168.75 Muy : 72.67 IR: 0.47
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 864 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 865
============================================================================
C O L U M N N O. 339 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 169 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -7.49
About Z About Y
INITIAL MOMENTS : 5.15 0.33
MOMENTS DUE TO MINIMUM ECC. : 0.15 0.15
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.15 0.33
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.87 Muy1 : 40.53
INTERACTION RATIO: 0.07 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 169 Puz : 2178.12 Muz : 153.82 Muy : 66.42 IR: 0.52
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 865 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 866
============================================================================
C O L U M N N O. 340 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 203 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.68
About Z About Y
INITIAL MOMENTS : 3.57 0.83
MOMENTS DUE TO MINIMUM ECC. : 0.05 0.05
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 3.57 0.83
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.69 Muy1 : 40.90
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 203 Puz : 2178.12 Muz : 135.10 Muy : 57.95 IR: 0.55
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 866 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 867
============================================================================
C O L U M N N O. 341 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 19 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.07
About Z About Y
INITIAL MOMENTS : 2.31 0.73
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.02
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.31 0.73
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.97 Muy1 : 41.02
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 19 Puz : 2178.12 Muz : 164.99 Muy : 71.76 IR: 0.22
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 867 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 868
============================================================================
C O L U M N N O. 342 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 72 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.69
About Z About Y
INITIAL MOMENTS : 1.26 0.88
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.26 0.88
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.04 Muy1 : 41.05
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 106 Puz : 2178.12 Muz : 178.42 Muy : 76.16 IR: 0.24
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 868 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 869
============================================================================
C O L U M N N O. 343 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 106 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.42
About Z About Y
INITIAL MOMENTS : 1.19 0.61
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.19 0.61
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.08 Muy1 : 41.07
INTERACTION RATIO: 0.03 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 140 Puz : 2178.12 Muz : 177.81 Muy : 77.11 IR: 0.39
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 869 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 870
============================================================================
C O L U M N N O. 344 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 140 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.30
About Z About Y
INITIAL MOMENTS : 1.12 0.53
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.12 0.53
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.10 Muy1 : 41.08
INTERACTION RATIO: 0.03 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 174 Puz : 2178.12 Muz : 169.17 Muy : 72.82 IR: 0.55
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 870 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 871
============================================================================
C O L U M N N O. 345 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 174 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.20
About Z About Y
INITIAL MOMENTS : 1.11 0.48
MOMENTS DUE TO MINIMUM ECC. : 0.00 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.11 0.48
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.12 Muy1 : 41.09
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 208 Puz : 2178.12 Muz : 151.47 Muy : 65.33 IR: 0.65
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 871 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 872
============================================================================
C O L U M N N O. 346 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 11 END JOINT: 242 SHORT COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : 42.84
About Z About Y
INITIAL MOMENTS : 65.41 19.48
MOMENTS DUE TO MINIMUM ECC. : 0.98 0.86
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 65.41 19.48
REQD. STEEL AREA : 1140.05 Sq.mm.
REQD. CONCRETE AREA: 123859.95 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2099.63 Muz1 : 109.82 Muy1 : 48.81
INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 242 Puz : 2178.12 Muz : 128.99 Muy : 55.56 IR: 0.86
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 872 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 873
============================================================================
C O L U M N N O. 347 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 20 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -165.37
About Z About Y
INITIAL MOMENTS : 25.22 2.14
MOMENTS DUE TO MINIMUM ECC. : 3.76 3.31
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 25.22 3.31
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 58.61 Muy1 : 27.37
INTERACTION RATIO: 0.55 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 20 Puz : 2178.12 Muz : 172.50 Muy : 74.08 IR: 0.41
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 873 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 874
============================================================================
C O L U M N N O. 348 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 73 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -39.14
About Z About Y
INITIAL MOMENTS : 2.65 2.43
MOMENTS DUE TO MINIMUM ECC. : 0.89 0.78
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.65 2.43
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 84.02 Muy1 : 38.08
INTERACTION RATIO: 0.10 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 107 Puz : 2178.12 Muz : 126.52 Muy : 54.64 IR: 0.24
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 874 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 875
============================================================================
C O L U M N N O. 349 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 107 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -9.76
About Z About Y
INITIAL MOMENTS : 1.36 2.45
MOMENTS DUE TO MINIMUM ECC. : 0.22 0.20
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.36 2.45
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.46 Muy1 : 40.36
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 141 Puz : 2178.12 Muz : 123.34 Muy : 53.46 IR: 0.34
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 875 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 876
============================================================================
C O L U M N N O. 350 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 141 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -2.48
About Z About Y
INITIAL MOMENTS : 0.67 2.40
MOMENTS DUE TO MINIMUM ECC. : 0.06 0.05
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.67 2.40
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.73 Muy1 : 40.91
INTERACTION RATIO: 0.07 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 175 Puz : 2178.12 Muz : 122.87 Muy : 53.28 IR: 0.43
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 876 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 877
============================================================================
C O L U M N N O. 351 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 175 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.79
About Z About Y
INITIAL MOMENTS : 0.48 2.32
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.02
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.48 2.32
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.02 Muy1 : 41.04
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 209 Puz : 2178.12 Muz : 121.32 Muy : 52.70 IR: 0.47
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 877 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 878
============================================================================
C O L U M N N O. 352 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 209 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.37
About Z About Y
INITIAL MOMENTS : 0.49 2.35
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.49 2.35
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.09 Muy1 : 41.08
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 243 Puz : 2178.12 Muz : 119.99 Muy : 52.18 IR: 0.57
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 878 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 879
============================================================================
C O L U M N N O. 353 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 22 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -63.16
About Z About Y
INITIAL MOMENTS : 3.65 1.21
MOMENTS DUE TO MINIMUM ECC. : 1.26 1.26
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 3.65 1.26
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 79.39 Muy1 : 36.12
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 259 Puz : 2178.12 Muz : 166.75 Muy : 72.02 IR: 0.25
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 879 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 880
============================================================================
C O L U M N N O. 354 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 75 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -50.56
About Z About Y
INITIAL MOMENTS : 11.89 1.13
MOMENTS DUE TO MINIMUM ECC. : 1.01 1.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 11.89 1.13
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 81.84 Muy1 : 37.16
INTERACTION RATIO: 0.18 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 75 Puz : 2178.12 Muz : 168.35 Muy : 72.53 IR: 0.23
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 880 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 881
============================================================================
C O L U M N N O. 355 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 109 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -38.46
About Z About Y
INITIAL MOMENTS : 10.20 1.51
MOMENTS DUE TO MINIMUM ECC. : 0.77 0.77
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 10.20 1.51
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 84.14 Muy1 : 38.14
INTERACTION RATIO: 0.16 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 263 Puz : 2178.12 Muz : 152.54 Muy : 65.83 IR: 0.24
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 881 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 882
============================================================================
C O L U M N N O. 356 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 143 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -27.35
About Z About Y
INITIAL MOMENTS : 10.74 1.80
MOMENTS DUE TO MINIMUM ECC. : 0.55 0.55
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 10.74 1.80
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.23 Muy1 : 39.02
INTERACTION RATIO: 0.17 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 265 Puz : 2178.12 Muz : 144.62 Muy : 62.24 IR: 0.25
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 882 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 883
============================================================================
C O L U M N N O. 357 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 177 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -16.92
About Z About Y
INITIAL MOMENTS : 11.08 1.80
MOMENTS DUE TO MINIMUM ECC. : 0.34 0.34
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 11.08 1.80
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.16 Muy1 : 39.81
INTERACTION RATIO: 0.17 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 267 Puz : 2178.12 Muz : 142.92 Muy : 61.48 IR: 0.26
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 883 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 884
============================================================================
C O L U M N N O. 358 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 211 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -6.63
About Z About Y
INITIAL MOMENTS : 12.33 1.26
MOMENTS DUE TO MINIMUM ECC. : 0.13 0.13
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 12.33 1.26
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.01 Muy1 : 40.60
INTERACTION RATIO: 0.17 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 211 Puz : 2178.12 Muz : 129.71 Muy : 55.83 IR: 0.25
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 884 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 885
============================================================================
C O L U M N N O. 359 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 24 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -191.62
About Z About Y
INITIAL MOMENTS : 26.17 0.10
MOMENTS DUE TO MINIMUM ECC. : 4.36 3.83
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 26.17 3.83
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 53.13 Muy1 : 25.06
INTERACTION RATIO: 0.65 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 24 Puz : 2178.12 Muz : 92.70 Muy : 41.24 IR: 0.62
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 885 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 886
============================================================================
C O L U M N N O. 360 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 77 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -39.51
About Z About Y
INITIAL MOMENTS : 1.94 0.47
MOMENTS DUE TO MINIMUM ECC. : 0.90 0.79
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.94 0.79
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 83.95 Muy1 : 38.05
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 111 Puz : 2178.12 Muz : 130.00 Muy : 55.94 IR: 0.55
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 886 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 887
============================================================================
C O L U M N N O. 361 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 111 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -8.51
About Z About Y
INITIAL MOMENTS : 0.65 0.46
MOMENTS DUE TO MINIMUM ECC. : 0.19 0.17
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.65 0.46
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.68 Muy1 : 40.45
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 145 Puz : 2178.12 Muz : 122.90 Muy : 53.29 IR: 0.64
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 887 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 888
============================================================================
C O L U M N N O. 362 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 145 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.81
About Z About Y
INITIAL MOMENTS : 0.06 0.44
MOMENTS DUE TO MINIMUM ECC. : 0.04 0.04
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.06 0.44
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.84 Muy1 : 40.97
INTERACTION RATIO: 0.01 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 179 Puz : 2178.12 Muz : 121.04 Muy : 52.60 IR: 0.68
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 888 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 889
============================================================================
C O L U M N N O. 363 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 179 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.39
About Z About Y
INITIAL MOMENTS : 0.05 0.43
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.05 0.43
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.09 Muy1 : 41.07
INTERACTION RATIO: 0.01 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 213 Puz : 2178.12 Muz : 119.93 Muy : 52.16 IR: 0.71
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 889 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 890
============================================================================
C O L U M N N O. 364 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 213 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.10
About Z About Y
INITIAL MOMENTS : 0.05 0.49
MOMENTS DUE TO MINIMUM ECC. : 0.00 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.05 0.49
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.14 Muy1 : 41.10
INTERACTION RATIO: 0.01 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 213 Puz : 2178.12 Muz : 118.82 Muy : 51.72 IR: 0.65
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 890 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 891
============================================================================
C O L U M N N O. 365 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 25 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -29.90
About Z About Y
INITIAL MOMENTS : 2.04 0.62
MOMENTS DUE TO MINIMUM ECC. : 0.68 0.60
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.04 0.62
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.75 Muy1 : 38.81
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 25 Puz : 2178.12 Muz : 166.56 Muy : 71.95 IR: 0.31
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 891 of 946
Tuesday, September 10, 2019, 11:33 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 892
============================================================================
C O L U M N N O. 366 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 78 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -9.71
About Z About Y
INITIAL MOMENTS : 0.65 0.28
MOMENTS DUE TO MINIMUM ECC. : 0.22 0.19
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.65 0.28
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.46 Muy1 : 40.36
INTERACTION RATIO: 0.01 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 112 Puz : 2178.12 Muz : 141.22 Muy : 60.72 IR: 0.26
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 892 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 893
============================================================================
C O L U M N N O. 367 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 112 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -3.17
About Z About Y
INITIAL MOMENTS : 0.09 0.06
MOMENTS DUE TO MINIMUM ECC. : 0.07 0.06
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.09 0.06
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.61 Muy1 : 40.86
INTERACTION RATIO: 0.00 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 146 Puz : 2178.12 Muz : 129.82 Muy : 55.88 IR: 0.37
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 893 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 894
============================================================================
C O L U M N N O. 368 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 146 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.02
About Z About Y
INITIAL MOMENTS : 0.09 0.02
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.02
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.09 0.02
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.98 Muy1 : 41.03
INTERACTION RATIO: 0.00 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 180 Puz : 2178.12 Muz : 124.76 Muy : 53.99 IR: 0.44
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 894 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 895
============================================================================
C O L U M N N O. 369 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 180 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.32
About Z About Y
INITIAL MOMENTS : 0.15 0.03
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.15 0.03
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.10 Muy1 : 41.08
INTERACTION RATIO: 0.00 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 214 Puz : 2178.12 Muz : 121.88 Muy : 52.91 IR: 0.48
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 895 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 896
============================================================================
C O L U M N N O. 370 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 214 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.02
About Z About Y
INITIAL MOMENTS : 0.17 0.00
MOMENTS DUE TO MINIMUM ECC. : 0.00 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.17 0.00
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.15 Muy1 : 41.10
INTERACTION RATIO: 0.00 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 248 Puz : 2178.12 Muz : 118.84 Muy : 51.72 IR: 0.49
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 896 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 897
============================================================================
C O L U M N N O. 371 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 26 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -47.69
About Z About Y
INITIAL MOMENTS : 0.55 0.46
MOMENTS DUE TO MINIMUM ECC. : 1.09 0.95
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.09 0.95
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 82.39 Muy1 : 37.39
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 26 Puz : 2178.12 Muz : 176.23 Muy : 75.36 IR: 0.19
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 897 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 898
============================================================================
C O L U M N N O. 372 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 79 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -36.91
About Z About Y
INITIAL MOMENTS : 7.04 0.35
MOMENTS DUE TO MINIMUM ECC. : 0.84 0.74
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 7.04 0.74
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 84.44 Muy1 : 38.26
INTERACTION RATIO: 0.10 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 79 Puz : 2178.12 Muz : 179.04 Muy : 77.49 IR: 0.18
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 898 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 899
============================================================================
C O L U M N N O. 373 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 113 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -27.76
About Z About Y
INITIAL MOMENTS : 6.79 0.30
MOMENTS DUE TO MINIMUM ECC. : 0.63 0.56
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 6.79 0.56
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.16 Muy1 : 38.98
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 113 Puz : 2178.12 Muz : 173.34 Muy : 74.48 IR: 0.18
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 899 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 900
============================================================================
C O L U M N N O. 374 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 147 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -20.00
About Z About Y
INITIAL MOMENTS : 6.64 0.28
MOMENTS DUE TO MINIMUM ECC. : 0.46 0.40
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 6.64 0.40
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.60 Muy1 : 39.58
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 181 Puz : 2178.12 Muz : 150.50 Muy : 64.88 IR: 0.17
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 900 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 901
============================================================================
C O L U M N N O. 375 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 181 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -13.24
About Z About Y
INITIAL MOMENTS : 6.59 0.26
MOMENTS DUE TO MINIMUM ECC. : 0.30 0.26
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 6.59 0.26
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.83 Muy1 : 40.09
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 215 Puz : 2178.12 Muz : 137.56 Muy : 59.04 IR: 0.17
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 901 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 902
============================================================================
C O L U M N N O. 376 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 215 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -7.11
About Z About Y
INITIAL MOMENTS : 6.30 0.27
MOMENTS DUE TO MINIMUM ECC. : 0.16 0.14
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 6.30 0.27
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.93 Muy1 : 40.56
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 249 Puz : 2178.12 Muz : 122.11 Muy : 52.99 IR: 0.24
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 902 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 903
============================================================================
C O L U M N N O. 377 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 28 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -39.38
About Z About Y
INITIAL MOMENTS : 0.95 0.92
MOMENTS DUE TO MINIMUM ECC. : 0.90 0.79
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.95 0.92
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 83.97 Muy1 : 38.06
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 81 Puz : 2178.12 Muz : 174.49 Muy : 75.17 IR: 0.20
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 903 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 904
============================================================================
C O L U M N N O. 378 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 81 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -33.16
About Z About Y
INITIAL MOMENTS : 4.88 1.18
MOMENTS DUE TO MINIMUM ECC. : 0.75 0.66
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.88 1.18
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.14 Muy1 : 38.56
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 115 Puz : 2178.12 Muz : 177.33 Muy : 76.88 IR: 0.20
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 904 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 905
============================================================================
C O L U M N N O. 379 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 115 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -26.69
About Z About Y
INITIAL MOMENTS : 5.44 1.15
MOMENTS DUE TO MINIMUM ECC. : 0.61 0.53
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.44 1.15
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.36 Muy1 : 39.07
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 115 Puz : 2178.12 Muz : 172.55 Muy : 74.10 IR: 0.22
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 905 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 906
============================================================================
C O L U M N N O. 380 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 149 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -19.97
About Z About Y
INITIAL MOMENTS : 5.37 0.94
MOMENTS DUE TO MINIMUM ECC. : 0.45 0.40
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.37 0.94
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.61 Muy1 : 39.58
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 149 Puz : 2178.12 Muz : 161.66 Muy : 69.86 IR: 0.19
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 906 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 907
============================================================================
C O L U M N N O. 381 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 183 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -13.04
About Z About Y
INITIAL MOMENTS : 5.47 0.54
MOMENTS DUE TO MINIMUM ECC. : 0.30 0.26
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.47 0.54
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.86 Muy1 : 40.11
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 183 Puz : 2178.12 Muz : 147.06 Muy : 63.33 IR: 0.17
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 907 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 908
============================================================================
C O L U M N N O. 382 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 217 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -5.86
About Z About Y
INITIAL MOMENTS : 5.24 0.10
MOMENTS DUE TO MINIMUM ECC. : 0.13 0.12
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.24 0.12
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.15 Muy1 : 40.66
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 251 Puz : 2178.12 Muz : 128.08 Muy : 55.20 IR: 0.15
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 908 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 909
============================================================================
C O L U M N N O. 383 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 29 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -60.13
About Z About Y
INITIAL MOMENTS : 5.18 4.24
MOMENTS DUE TO MINIMUM ECC. : 1.37 1.20
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.18 4.24
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 79.99 Muy1 : 36.37
INTERACTION RATIO: 0.18 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 21
END JOINT: 82 Puz : 2178.12 Muz : 169.11 Muy : 72.80 IR: 0.23
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 909 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 910
============================================================================
C O L U M N N O. 384 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 82 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -48.81
About Z About Y
INITIAL MOMENTS : 5.77 4.22
MOMENTS DUE TO MINIMUM ECC. : 1.11 0.98
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.77 4.22
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 82.18 Muy1 : 37.30
INTERACTION RATIO: 0.18 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 82 Puz : 2178.12 Muz : 171.67 Muy : 73.72 IR: 0.26
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 910 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 911
============================================================================
C O L U M N N O. 385 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 116 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -37.82
About Z About Y
INITIAL MOMENTS : 4.57 3.93
MOMENTS DUE TO MINIMUM ECC. : 0.86 0.76
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.57 3.93
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 84.27 Muy1 : 38.19
INTERACTION RATIO: 0.16 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 116 Puz : 2178.12 Muz : 163.01 Muy : 70.45 IR: 0.22
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 911 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 912
============================================================================
C O L U M N N O. 386 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 150 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -27.44
About Z About Y
INITIAL MOMENTS : 4.44 3.74
MOMENTS DUE TO MINIMUM ECC. : 0.62 0.55
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.44 3.74
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.22 Muy1 : 39.01
INTERACTION RATIO: 0.15 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 150 Puz : 2178.12 Muz : 152.47 Muy : 65.80 IR: 0.20
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 912 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 913
============================================================================
C O L U M N N O. 387 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 184 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -17.49
About Z About Y
INITIAL MOMENTS : 4.25 3.56
MOMENTS DUE TO MINIMUM ECC. : 0.40 0.35
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.25 3.56
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.06 Muy1 : 39.76
INTERACTION RATIO: 0.14 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 218 Puz : 2178.12 Muz : 139.42 Muy : 59.91 IR: 0.20
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 913 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 914
============================================================================
C O L U M N N O. 388 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 218 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -7.67
About Z About Y
INITIAL MOMENTS : 4.43 3.85
MOMENTS DUE TO MINIMUM ECC. : 0.17 0.15
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.43 3.85
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.83 Muy1 : 40.52
INTERACTION RATIO: 0.14 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 20
END JOINT: 252 Puz : 2178.12 Muz : 121.16 Muy : 52.64 IR: 0.26
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 914 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 915
============================================================================
C O L U M N N O. 389 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 30 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -57.13
About Z About Y
INITIAL MOMENTS : 4.07 0.88
MOMENTS DUE TO MINIMUM ECC. : 1.30 1.14
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 4.07 1.14
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 80.58 Muy1 : 36.61
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 22
END JOINT: 30 Puz : 2178.12 Muz : 154.47 Muy : 66.70 IR: 0.28
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 915 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 916
============================================================================
C O L U M N N O. 390 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 83 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -10.08
About Z About Y
INITIAL MOMENTS : 0.60 2.09
MOMENTS DUE TO MINIMUM ECC. : 0.23 0.20
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.60 2.09
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.40 Muy1 : 40.33
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 117 Puz : 2178.12 Muz : 124.94 Muy : 54.07 IR: 0.22
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 916 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 917
============================================================================
C O L U M N N O. 391 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 117 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.84
About Z About Y
INITIAL MOMENTS : 0.11 1.99
MOMENTS DUE TO MINIMUM ECC. : 0.04 0.04
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.11 1.99
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.84 Muy1 : 40.96
INTERACTION RATIO: 0.05 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 151 Puz : 2178.12 Muz : 122.07 Muy : 52.98 IR: 0.25
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 917 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 918
============================================================================
C O L U M N N O. 392 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 151 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.37
About Z About Y
INITIAL MOMENTS : 0.01 1.89
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.01
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.01 1.89
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.09 Muy1 : 41.08
INTERACTION RATIO: 0.05 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 185 Puz : 2178.12 Muz : 120.84 Muy : 52.51 IR: 0.27
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 918 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 919
============================================================================
C O L U M N N O. 393 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 185 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.11
About Z About Y
INITIAL MOMENTS : 0.00 1.83
MOMENTS DUE TO MINIMUM ECC. : 0.00 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.00 1.83
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.14 Muy1 : 41.10
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 219 Puz : 2178.12 Muz : 120.26 Muy : 52.28 IR: 0.29
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 919 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 920
============================================================================
C O L U M N N O. 394 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 219 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.23
About Z About Y
INITIAL MOMENTS : 0.03 1.77
MOMENTS DUE TO MINIMUM ECC. : 0.01 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.03 1.77
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.11 Muy1 : 41.09
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 219 Puz : 2178.12 Muz : 120.41 Muy : 52.34 IR: 0.25
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 920 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 921
============================================================================
C O L U M N N O. 395 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 32 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -56.84
About Z About Y
INITIAL MOMENTS : 6.32 1.39
MOMENTS DUE TO MINIMUM ECC. : 1.29 1.14
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 6.32 1.39
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 80.63 Muy1 : 36.64
INTERACTION RATIO: 0.12 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 32 Puz : 2178.12 Muz : 149.50 Muy : 64.43 IR: 0.20
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 921 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 922
============================================================================
C O L U M N N O. 396 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 85 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -6.09
About Z About Y
INITIAL MOMENTS : 1.89 0.12
MOMENTS DUE TO MINIMUM ECC. : 0.14 0.12
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.89 0.12
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.11 Muy1 : 40.64
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 119 Puz : 2178.12 Muz : 124.67 Muy : 53.96 IR: 0.15
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 922 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 923
============================================================================
C O L U M N N O. 397 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 119 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.76
About Z About Y
INITIAL MOMENTS : 1.62 0.04
MOMENTS DUE TO MINIMUM ECC. : 0.02 0.02
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.62 0.04
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.02 Muy1 : 41.05
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 153 Puz : 2178.12 Muz : 121.34 Muy : 52.71 IR: 0.17
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 923 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 924
============================================================================
C O L U M N N O. 398 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 153 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.16
About Z About Y
INITIAL MOMENTS : 1.47 0.04
MOMENTS DUE TO MINIMUM ECC. : 0.00 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.47 0.04
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.13 Muy1 : 41.09
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 187 Puz : 2178.12 Muz : 120.86 Muy : 52.52 IR: 0.19
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 924 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 925
============================================================================
C O L U M N N O. 399 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 187 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.06
About Z About Y
INITIAL MOMENTS : 1.37 0.04
MOMENTS DUE TO MINIMUM ECC. : 0.00 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.37 0.04
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.14 Muy1 : 41.10
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 221 Puz : 2178.12 Muz : 120.59 Muy : 52.42 IR: 0.20
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 925 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 926
============================================================================
C O L U M N N O. 400 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 1 END JOINT: 221 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -0.11
About Z About Y
INITIAL MOMENTS : 1.41 0.04
MOMENTS DUE TO MINIMUM ECC. : 0.00 0.00
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.41 0.04
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 91.14 Muy1 : 41.10
INTERACTION RATIO: 0.02 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 221 Puz : 2178.12 Muz : 121.71 Muy : 52.85 IR: 0.18
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 926 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 927
============================================================================
C O L U M N N O. 401 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 34 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -38.45
About Z About Y
INITIAL MOMENTS : 1.58 2.28
MOMENTS DUE TO MINIMUM ECC. : 0.88 0.77
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.58 2.28
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 84.15 Muy1 : 38.14
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 34 Puz : 2178.12 Muz : 174.74 Muy : 75.31 IR: 0.24
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 927 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 928
============================================================================
C O L U M N N O. 402 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 87 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -31.58
About Z About Y
INITIAL MOMENTS : 1.36 5.31
MOMENTS DUE TO MINIMUM ECC. : 0.72 0.63
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.36 5.31
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.44 Muy1 : 38.68
INTERACTION RATIO: 0.15 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 87 Puz : 2178.12 Muz : 171.03 Muy : 73.47 IR: 0.23
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 928 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 929
============================================================================
C O L U M N N O. 403 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 121 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -24.82
About Z About Y
INITIAL MOMENTS : 1.34 4.85
MOMENTS DUE TO MINIMUM ECC. : 0.57 0.50
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.34 4.85
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.71 Muy1 : 39.21
INTERACTION RATIO: 0.14 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 121 Puz : 2178.12 Muz : 162.82 Muy : 70.36 IR: 0.22
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 929 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 930
============================================================================
C O L U M N N O. 404 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 155 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -18.33
About Z About Y
INITIAL MOMENTS : 1.06 4.73
MOMENTS DUE TO MINIMUM ECC. : 0.42 0.37
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.06 4.73
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.91 Muy1 : 39.70
INTERACTION RATIO: 0.13 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 155 Puz : 2178.12 Muz : 152.74 Muy : 65.92 IR: 0.21
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 930 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 931
============================================================================
C O L U M N N O. 405 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 189 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -11.85
About Z About Y
INITIAL MOMENTS : 0.58 4.58
MOMENTS DUE TO MINIMUM ECC. : 0.27 0.24
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.58 4.58
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.08 Muy1 : 40.20
INTERACTION RATIO: 0.12 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 12
END JOINT: 189 Puz : 2178.12 Muz : 141.43 Muy : 60.82 IR: 0.21
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 931 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 932
============================================================================
C O L U M N N O. 406 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 3050.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 223 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -5.10
About Z About Y
INITIAL MOMENTS : 0.35 4.94
MOMENTS DUE TO MINIMUM ECC. : 0.12 0.10
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.35 4.94
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.28 Muy1 : 40.71
INTERACTION RATIO: 0.13 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 257 Puz : 2178.12 Muz : 124.68 Muy : 53.96 IR: 0.31
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 932 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 933
============================================================================
C O L U M N N O. 568 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 258 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -44.34
About Z About Y
INITIAL MOMENTS : 1.29 1.43
MOMENTS DUE TO MINIMUM ECC. : 0.89 0.89
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.29 1.43
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 83.03 Muy1 : 37.66
INTERACTION RATIO: 0.05 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 67 Puz : 2178.12 Muz : 178.80 Muy : 77.41 IR: 0.36
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 933 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 934
============================================================================
C O L U M N N O. 569 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 259 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -64.74
About Z About Y
INITIAL MOMENTS : 5.41 1.24
MOMENTS DUE TO MINIMUM ECC. : 1.29 1.29
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 5.41 1.29
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 79.08 Muy1 : 35.99
INTERACTION RATIO: 0.10 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 23
END JOINT: 75 Puz : 2178.12 Muz : 167.46 Muy : 72.26 IR: 0.23
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 934 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 935
============================================================================
C O L U M N N O. 571 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 260 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -33.70
About Z About Y
INITIAL MOMENTS : 0.09 2.01
MOMENTS DUE TO MINIMUM ECC. : 0.67 0.67
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.67 2.01
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.04 Muy1 : 38.51
INTERACTION RATIO: 0.06 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 101 Puz : 2178.12 Muz : 175.50 Muy : 75.74 IR: 0.40
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 935 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 936
============================================================================
C O L U M N N O. 572 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 261 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -52.67
About Z About Y
INITIAL MOMENTS : 0.10 1.20
MOMENTS DUE TO MINIMUM ECC. : 1.05 1.05
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.05 1.20
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 81.43 Muy1 : 36.98
INTERACTION RATIO: 0.05 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 261 Puz : 2178.12 Muz : 169.57 Muy : 72.96 IR: 0.22
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 936 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 937
============================================================================
C O L U M N N O. 574 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 262 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -23.84
About Z About Y
INITIAL MOMENTS : 0.69 2.63
MOMENTS DUE TO MINIMUM ECC. : 0.48 0.48
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.69 2.63
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 86.89 Muy1 : 39.28
INTERACTION RATIO: 0.07 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 135 Puz : 2178.12 Muz : 169.05 Muy : 72.78 IR: 0.44
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 937 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 938
============================================================================
C O L U M N N O. 575 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 263 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -40.79
About Z About Y
INITIAL MOMENTS : 1.38 0.86
MOMENTS DUE TO MINIMUM ECC. : 0.82 0.82
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.38 0.86
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 83.71 Muy1 : 37.95
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 263 Puz : 2178.12 Muz : 160.46 Muy : 69.34 IR: 0.21
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 938 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 939
============================================================================
C O L U M N N O. 577 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 264 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -14.14
About Z About Y
INITIAL MOMENTS : 0.33 3.06
MOMENTS DUE TO MINIMUM ECC. : 0.28 0.28
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 0.33 3.06
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 88.66 Muy1 : 40.02
INTERACTION RATIO: 0.08 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 169 Puz : 2178.12 Muz : 165.28 Muy : 71.40 IR: 0.50
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 939 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 940
============================================================================
C O L U M N N O. 578 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 265 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -29.62
About Z About Y
INITIAL MOMENTS : 2.04 0.26
MOMENTS DUE TO MINIMUM ECC. : 0.59 0.59
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.04 0.59
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 85.81 Muy1 : 38.84
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 14
END JOINT: 265 Puz : 2178.12 Muz : 149.69 Muy : 64.51 IR: 0.19
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 940 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 941
============================================================================
C O L U M N N O. 580 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 266 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -5.68
About Z About Y
INITIAL MOMENTS : 1.73 2.93
MOMENTS DUE TO MINIMUM ECC. : 0.11 0.11
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.73 2.93
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.18 Muy1 : 40.67
INTERACTION RATIO: 0.09 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 203 Puz : 2178.12 Muz : 149.08 Muy : 64.23 IR: 0.60
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 941 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 942
============================================================================
C O L U M N N O. 581 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 267 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -18.73
About Z About Y
INITIAL MOMENTS : 2.41 0.33
MOMENTS DUE TO MINIMUM ECC. : 0.37 0.37
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.41 0.37
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 87.83 Muy1 : 39.67
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 13
END JOINT: 211 Puz : 2178.12 Muz : 135.41 Muy : 58.07 IR: 0.22
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 942 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 943
============================================================================
C O L U M N N O. 583 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 268 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -1.61
About Z About Y
INITIAL MOMENTS : 1.40 1.29
MOMENTS DUE TO MINIMUM ECC. : 0.03 0.03
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 1.40 1.29
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 90.88 Muy1 : 40.98
INTERACTION RATIO: 0.05 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 11
END JOINT: 237 Puz : 2178.12 Muz : 133.17 Muy : 57.16 IR: 0.40
============================================================================
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 943 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 944
============================================================================
C O L U M N N O. 584 D E S I G N R E S U L T S
M30 Fe500 (Main) Fe500 (Sec.)
LENGTH: 1525.0 mm CROSS SECTION: 250.0 mm X 500.0 mm COVER: 40.0 mm
** GUIDING LOAD CASE: 2 END JOINT: 269 TENSION COLUMN
DESIGN FORCES (KNS-MET)
-----------------------
DESIGN AXIAL FORCE (Pu) : -7.70
About Z About Y
INITIAL MOMENTS : 2.97 0.09
MOMENTS DUE TO MINIMUM ECC. : 0.15 0.15
SLENDERNESS RATIOS : - -
MOMENTS DUE TO SLENDERNESS EFFECT : - -
MOMENT REDUCTION FACTORS : - -
ADDITION MOMENTS (Maz and May) : - -
TOTAL DESIGN MOMENTS : 2.97 0.15
REQD. STEEL AREA : 1000.00 Sq.mm.
REQD. CONCRETE AREA: 124000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 12 - 12 dia. (1.09%, 1357.17 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)
----------------------------------------------------------
Puz : 2049.00 Muz1 : 89.83 Muy1 : 40.52
INTERACTION RATIO: 0.04 (as per Cl. 39.6, IS456:2000)
SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)
----------------------------------------------------------
WORST LOAD CASE: 21
END JOINT: 245 Puz : 2178.12 Muz : 123.29 Muy : 53.43 IR: 0.21
============================================================================
********************END OF COLUMN DESIGN RESULTS********************
346. CONCRETE TAKE
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 944 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 945
347. END CONCRETE DESIGN
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 945 of 946
Tuesday, September 10, 2019, 11:34 PM
DXF IMPORT OF KASINATH.DXF -- PAGE NO. 946
************** CONCRETE TAKE OFF **************
(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)
NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE.
REINFORCING STEEL QUANTITY REPRESENTS REINFORCING STEEL IN BEAMS AND COLUMNS DESIGNED ABOVE.
REINFORCING STEEL IN PLATES IS NOT INCLUDED IN THE REPORTED QUANTITY.
TOTAL VOLUME OF CONCRETE = 141.3 CU.METER
BAR DIA WEIGHT
(in mm) (in New)
-------- --------
8 34873
10 9841
12 69323
16 1298
20 2611
------------
*** TOTAL= 117946
348. FINISH
*********** END OF THE STAAD.Pro RUN ***********
**** DATE= SEP 10,2019 TIME= 23:28:34 ****
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2015 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************
C:\Users\Sayan Das\Desktop\ARTISAN GROUP\Kasinath Mullick Lane\Kasinath_str.anl Page 946 of 946
You might also like
- Anchor Bolt Design For Shear and TensionNo ratings yetAnchor Bolt Design For Shear and Tension2 pages
- HVAC Plans: Products Solutions Samples BuyNo ratings yetHVAC Plans: Products Solutions Samples Buy13 pages
- STAAD - Pro Report: Included in This Printout Are Data ForNo ratings yetSTAAD - Pro Report: Included in This Printout Are Data For28 pages
- Design of 20m Span Girders (Live Load Analysis Results)No ratings yetDesign of 20m Span Girders (Live Load Analysis Results)11 pages
- Design and Analysis of Continuous Propped Cantilever BeamNo ratings yetDesign and Analysis of Continuous Propped Cantilever Beam15 pages
- Wednesday, May 30, 2018, 06:54 PM: Page 226 of 550 E:/sayantani/ult - AnlNo ratings yetWednesday, May 30, 2018, 06:54 PM: Page 226 of 550 E:/sayantani/ult - Anl2 pages
- Design Summary: Height of Compound Wall 2.4mNo ratings yetDesign Summary: Height of Compound Wall 2.4m10 pages
- Design of 35m Span Girder (Transverse Analysis of Box Girder)No ratings yetDesign of 35m Span Girder (Transverse Analysis of Box Girder)7 pages
- Continuous Beam: Staircase: Input TablesNo ratings yetContinuous Beam: Staircase: Input Tables7 pages
- Design Considerations and Important NotesNo ratings yetDesign Considerations and Important Notes32 pages
- Monday, August 19, 2019, 01:29 AM: Page 1 of 9 C:/Users/ECO CIVIL/Desktop/FINAL/SBR CHK/3.Actuator Frame - Anl0% (1)Monday, August 19, 2019, 01:29 AM: Page 1 of 9 C:/Users/ECO CIVIL/Desktop/FINAL/SBR CHK/3.Actuator Frame - Anl9 pages
- Project:: Winbeam 3.30 - Registered To Axis/FffNo ratings yetProject:: Winbeam 3.30 - Registered To Axis/Fff4 pages
- Tuesday, January 08, 2019, 05:52 PM: Page 1 of 21 C:/Sprov8I Ss6/Staad/Plugins/T1Gym - AnlNo ratings yetTuesday, January 08, 2019, 05:52 PM: Page 1 of 21 C:/Sprov8I Ss6/Staad/Plugins/T1Gym - Anl21 pages
- Sheet Job Number Job Title Client Calcs by Checked by Date Software Consultants (Pty) LTDNo ratings yetSheet Job Number Job Title Client Calcs by Checked by Date Software Consultants (Pty) LTD9 pages
- KIDIWA BEAM PART OF PROKON ANALYSIS CORRECTION FULL DOCUMENTNo ratings yetKIDIWA BEAM PART OF PROKON ANALYSIS CORRECTION FULL DOCUMENT13 pages
- An Analytical Study For Fluidized Bed Cooler Thermal Design: ArticleNo ratings yetAn Analytical Study For Fluidized Bed Cooler Thermal Design: Article15 pages
- Conduction, Convection, Radiation: Resource ID#: 129984 Primary Type: Lesson PlanNo ratings yetConduction, Convection, Radiation: Resource ID#: 129984 Primary Type: Lesson Plan7 pages
- 8.012 Physics I: Classical Mechanics: Mit OpencoursewareNo ratings yet8.012 Physics I: Classical Mechanics: Mit Opencourseware4 pages
- Design and Simulation of InGaAs/GaAsSb Single Quantum Well Structure For Optical Fiber Application: Electronic Band Structure, Carrier Transport, and Optical Gain AnalysisNo ratings yetDesign and Simulation of InGaAs/GaAsSb Single Quantum Well Structure For Optical Fiber Application: Electronic Band Structure, Carrier Transport, and Optical Gain Analysis4 pages
- Download Full Fluid sealing technology principles and applications Müller PDF All Chapters100% (2)Download Full Fluid sealing technology principles and applications Müller PDF All Chapters55 pages
- Chemistry 432 Problem Set 5 Spring 2018 SolutionsNo ratings yetChemistry 432 Problem Set 5 Spring 2018 Solutions6 pages
- SKEMA - SOALAN ALA FORMAT PSPM I Set 1 SK015 2020No ratings yetSKEMA - SOALAN ALA FORMAT PSPM I Set 1 SK015 20207 pages
- Fundamental Metallurgy of Niobium in Steel100% (1)Fundamental Metallurgy of Niobium in Steel74 pages
- JIS G 3141 (2005) Cold-Reduced Carbon Steel Sheets and Strip (SPCC SPCD SPEC)100% (1)JIS G 3141 (2005) Cold-Reduced Carbon Steel Sheets and Strip (SPCC SPCD SPEC)15 pages
