Scribd
Upload
79 views

Introduction To Digital VLSI

1) Digital VLSI logic synthesis involves reading a design, applying constraints, compiling the design, and writing out a synthesized netlist. 2) Synthesis scripts specify configuration, libraries, design read/write steps, and generate reports. 3) Technology libraries define the available gates for the target library that gets mapped to during synthesis and the link library used for pre-optimization gate representation.

Uploaded by

Anoop FISAT
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
79 views

Introduction To Digital VLSI

1) Digital VLSI logic synthesis involves reading a design, applying constraints, compiling the design, and writing out a synthesized netlist. 2) Synthesis scripts specify configuration, libraries, design read/write steps, and generate reports. 3) Technology libraries define the available gates for the target library that gets mapped to during synthesis and the link library used for pre-optimization gate representation.

Uploaded by

Anoop FISAT
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Introduction to Digital VLSI Logic Synthesis

Basic Synthesis Flow and Commands


• Technology Libraries
• Design Read/Write
• Design Objects
• Timing Paths
• Constraints
• Compile
• Wire Load Models
• Multiple Instances
• Integration
• Advanced Commands
• Check Before Compile
• Check After Compile

Page 61
Introduction to Digital VLSI Logic Synthesis

Synthesis Script Flow


1. Configuration variables, e.g. bus_naming_style, verilogout_no_tri
2. Library variables
3. Read design
4. Constraints
5. Compile
6. Reports
7. Write design

Page 62
Introduction to Digital VLSI Logic Synthesis

Some Tcl Syntax


dc_shell-t> set a 5
5

dc_shell-t> set b {c d $a [list $a z]}


c d $a [list $a z]

dc_shell-t> set b [list c d $a [list $a z]]


c d 5 {5 z}

dc_shell-t> set delay [expr .5 * $base_delay]

• [cmd] — returns the result of the command: like ‘cmd‘ in csh.


• {} — creates a list without variable or command substitution
• Use the list command when variable and/or command subtitution is required.

• Use the expr command for all arithmetic expressions.

Many Tcl resources (for advanced scripts): http://tcl.activestate.com

Page 63
Introduction to Digital VLSI Logic Synthesis

Technology Libraries

Target Library
• The target library is the technology library you want to map to during
synthesis. It is also known as the destination library.
• Specify the target library with the pointer variable target_library.
set target_library {"cdr2synPwcslV300T125.db" "scanff.db"}

Optimized
Netlist
Design
Compiler

Design is mapped to gates from target_library.

Target
Library

Page 64
Introduction to Digital VLSI Logic Synthesis

Link Library
• The link library is a technology library that is used to describe the
function of mapped cells prior to optimization.
• Specify the link library with the variable pointer link_library.
• Typically, the link and target library are set to the same technology
library.
• The first entry in the list should be "*" to use designs currently in
memory.
Link
Library
HDL Code
RTL + manually Optimized
instantiated gates Netlist
Design
Compiler

Netlist Design is mapped to gates from target_library.


from earlier
synthesis Target
Library

Page 65

You might also like