Scribd
Upload
74 views

FM Syllabus

This document describes a Fluid Mechanics course with the following key details: 1. The course covers topics such as fluid statics, fluid dynamics, flow measurement techniques, and applications of concepts to real fluid flows and compressible fluids. 2. The course objectives are to study fluid mechanics principles, mass/momentum/energy equations, and various flow measurement techniques. 3. Students will learn to define fluid properties, evaluate hydrostatic forces, formulate fluid flow equations, calculate flow resistance, and apply compressible flow concepts. 4. The course consists of 6 modules covering topics like fluid kinematics, fluid dynamics, real fluid flows, boundary layers, and compressible fluid flow.

Uploaded by

ParmeshwarPaul
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
74 views

FM Syllabus

This document describes a Fluid Mechanics course with the following key details: 1. The course covers topics such as fluid statics, fluid dynamics, flow measurement techniques, and applications of concepts to real fluid flows and compressible fluids. 2. The course objectives are to study fluid mechanics principles, mass/momentum/energy equations, and various flow measurement techniques. 3. Students will learn to define fluid properties, evaluate hydrostatic forces, formulate fluid flow equations, calculate flow resistance, and apply compressible flow concepts. 4. The course consists of 6 modules covering topics like fluid kinematics, fluid dynamics, real fluid flows, boundary layers, and compressible fluid flow.

Uploaded by

ParmeshwarPaul
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Course Code Course Name Credits

MEC402 Fluid Mechanics* 04

Objectives:
1. To study fluid statics and fluid dynamics
2. To study application of mass, momentum and energy equations in fluid flow.
3. To learn various flow measurement techniques.

Outcomes:
1. Define properties of fluids and classification of fluids
2. Evaluate hydrostatic forces on various surfaces and predict stability of floating bodies
3. Formulate and solve equations of the control volume for fluid flow systems
4. ow measuring devices
5. Calculate resistance to flow of incompressible fluids through closed conduits and over surfaces
6. Apply fundamentals of compressible fluid flows to relevant systems

Module Detailed Contents Hrs

of fluids
1 06
Forces on surfaces due to hydro
2 Fluid Kinematics:
2.1 Eulerian and Lagrangian approach to solutions; Velocity and acceleration in an Eulerian flow
field; Definition of streamlines, path lines and streak lines; Definition of steady/unsteady,
uniform/non-uniform, one-two and three dimensional flows; Definition of control volume and
2 06
control surface, Understanding of differential and integral methods of analysis
2.2 Definition and equations for stream function, velocity potential function in rectangular and
cylindrical co-ordinates, rotational and irrotational flows;
Definition and equations for source, sink, irrotational vortex, circulation
3 Fluid Dynamics:
3.1 , equations for

measurement, pitot tube, venture, orifice and nozzle meters.


3.2 Differential equations for the control volume: Mass conservation in 2 and 3 dimension in 12
3
equation; Navier-Stokes equations (without proof) in rectangular Cartesian co-ordinates; Exact
solutions of Navier-Stokes Equations to viscous laminar flow between two parallel planes
(Couette flow and plane Poiseuille flow)
4 Real fluid flows:
4.1 , Laminar flow through a pipe (Hagen-Poiseuille flow),
velocity profile and head loss; Turbulent flows and theories of turbulence-Statistical theory,
4 Eddy viscosity theory and Prandtl mixing length theory; velocity profiles for turbulent flows- 08
universal velocity profile, 1/7th power law; Velocity profiles for smooth and rough pipes
4.2 for head loss in pipe (no derivation),
parallel, major and minor losses in pipes
5 Boundary Layer Flows:
5 5.1Concept of boundary layer and definition of boundary layer thickness, displacement, momentum 08
and energy thickness; Growth of boundary layer,

University of Mumbai, B. E. (Mechanical Engineering), Rev 2016 27


laminar and turbulent boundary layers, laminar sub-layer; Von Karman Momentum Integral
equation for boundary layers (without proof), analysis of laminar and turbulent boundary layers,
drag, boundary layer separation and methods to control it, streamlined and bluff bodies
5.2Aerofoil theory: Definition of aerofoil, lift and drag, stalling of aerofoils, induced drag
6 Compressible Fluid flow:
6.1 Propagation of sound waves through compressible fluids, Sonic velocity and Mach number;
Application of continuity , momentum and energy equations for steady state conditions; steady
6 08
flow through nozzle, isentropic flow through ducts of varying cross-sectional area, Effect of
varying back pressure on nozzle performance, Critical pressure ratio
6.2 Normal shocks, basic equations of normal shock, change of properties across normal shock

Assessment:

Internal Assessment for 20 marks:


Consisting Two Compulsory Class Tests
First test based on approximately 40% of contents and second test based on remaining contents (approximately
40% but excluding contents covered in Test I)

End Semester Examination:


Weightage of each module in end semester examination will be proportional to number of respective lecture
hours mentioned in the curriculum.
1. Question paper will comprise of total six questions, each carrying 20 marks
2. Question 1 will be compulsory and should cover maximum contents of the curriculum
3. Remaining questions will be mixed in nature (for example if Q.2 has part (a) from module 3 then
part (b) will be from any module other than module 3)
Only Four questions need to be solved.

Reference Books:
1. Fluid Mechanics by Yunus A Cengel and John M Cimbala, McGraw Hill Education, 3rd Edition
2. Fluid Mechanics and Machinery by C S P Ojha, Chandramouli and R Berndtsson, Oxford University
Press
3. Introduction to Fluid Mechanics by Fox and McDonald
4. Fluid Mechanics by R K Bansal
5. Fluid Mechanics by Victor Streeter, Benjamin Wylie and K W Bedford, McGraw Hill Education, 9th
Edition
6. Fluid Mechanics by K. L. Kumar
7. Introduction to Fluid Mechanics by James A. Fay
8. Fluid Mechanics by B. M. Massey
9. Mechanics of Fluids by Irving Shames
10. Fluid Mechanics and Hydraulics, S. K. Ukarande, Ane Books Pvt.Ltd

University of Mumbai, B. E. (Mechanical Engineering), Rev 2016 28


Course Code Course/Subject Name Credits
MEL402 Fluid Mechanics* 1

Objectives:
1. To study measurement as well as calibration principles
2. To practically verify the concepts learnt in theory course

Outcomes:
1. Calibrate different gauges
2. Measure hydrostatic forces
3. Verify the Archimedes Principle
4. Calibrate Venturimeter, Orificemeter and Pitot tube
5. nciple
6. Read manometers and maintain them.

(a) List of Experiments: Any 6 experiments to be performed.


Expt no Experiment Hrs
1 Calibration of Pressure Gauges 2
2 Measurement of Hydrostatic Pressures 2
3 Verification of Principle 2
4 Calibration of Venturimeter/ Orificemeter/Nozzlemeter/ Pitot tube 2
5 Determine the friction factor for Pipes 2
6 Determination of major and minor losses in Pipe systems 2
7 2
8 Experiment on Laminar flow in pipes 2
9 Calculation of Lift and Drag over an aerofoil 2
10 Determine the pressure profile over an aerofoil 2

(b) Mini Project: A mini project along with a brief report in which a group of students (maximum 4) will
design/ fabricate/ assemble a unit or software based simulation to demonstrate any principle in Fluid
Mechanics.

Assessment:
Term work Mark distribution will be as follows:
Laboratory work 15 marks
Mini Project 05 marks
Attendance 05 marks

End Semester Practical/Oral Examination:


1. Pair of Internal and External Examiner should conduct practical/viva based on contents. Distribution
of marks for practical/viva examination shall be as follows:
Practical performance 15 marks
Viva 10 marks
2. Evaluation of practical examination to be done based on the experiment performed and the output of
the experiment during practical examination
3. Students work along with evaluation report to be preserved till the next examination

University of Mumbai, B. E. (Mechanical Engineering), Rev 2016 37

You might also like