Power-monitoring units Power Meter Series 200

Functions and characteristics

The PowerLogic® Power Meter Series 200 is an easy-to-use, cost effective meter
that offers the basic measurement capabilities required to monitor an electrical
PB101570

installation. The compact 96 x 96 mm meter simultaneously monitors all three phases

of voltage and current. Energy and demand readings provide the information needed
to measure and control energy costs.

The PM200 includes an easy-to-read, anti-glare, back-lit LCD display. It features an

intuitive interface with context-based navigational menus. Summary screens and bar
charts provide system status at a glance. The default screen displays real energy and
per-phase current values. The energy summary screen displays total real, reactive,
and apparent energy. The demand summary screen displays real, reactive, and
apparent demand. Current demand and voltage summary screens provide the per-
phase and peak values needed to understand circuit performance and loading.

The Power Meter Series 200 is available in three versions:

b��PM200, basic version
b��PM200P, basic version plus two pulse outputs for energy metering
b��PM210, basic version plus an RS485 port for Modbus communication.

Applications
PB101571

OEM applications.
Panel instrumentation.
Applications with space restrictions.
Remote monitoring of an electrical installation.
Sub-billing / cost allocation / utility billing verification.
Cost constrained applications.

Characteristics
Compact
With a mounting depth of only 50 mm, the PM200 series is the perfect space saver.
Large, easy-to-read display
Summary screens for current, voltage, energy and demand on an anti-glare, green
back-light display.
Bar charts
Graphical representation of system loading and Outputs (PM200P) provide system
status at a glance.
Easy to operate
Intuitive navigation with context-based menus for easy use.
Modbus communications and digital outputs
The PM210 provides standard Modbus communications. The PM200P provides two
integrated digital outputs.
IEC 62053-21 Class 1 for real energy
Accurate measurement for sub-billing and cost allocation.
Direct connection for metering voltage inputs
No external PTs needed for voltages up to 480 V AC (L-L).
Easy to install
Uses only two clips. No tools needed.

Part numbers
Description Merlin Gerin Square D
Power Meter with Integrated Display
Power Meter PM200 with basic readings, demand, PM200MG PM200
and summary screens
Power Meter PM200P with basic readings, demand, PM200PMG PM200P
and summary screens, plus two digital outpouts
Power Meter PM210 with basic readings, demand, PM210MG PM210
and summary screens, plus an RS485
communication port
Parts and accessories
The PM200 series does not have any options or accessories.

432E2300_Ver2.0.indd/
 Power-monitoring units Power Meter Series 200
Functions and characteristics (cont.)

Meter selection guide PM200 PM200P PM210

General
DB101047

Use from LV to HV power systems b b b

Current and voltage accuracy 0.5 % 0.5 % 0.5 %
Active and reactive power accuracy 1% 1% 1%
Active energy accuracy 1% 1% 1%
Reactive energy accuracy 2% 2% 2%
Sampling rate (samples/cycle) 32 32 32
Instantaneous rms values
Current, voltage, frequency b b b
Active, reactive, apparent power Total b b b
Power factor Total b b b
Energy values
Active, reactive, Total b b b
apparent energy
Configurable accumulation mode b b b
Demand values
DB101048

Current Present and b b b

max. values
Active, reactive, apparent power Present and b b b
max. values
Display and outputs
Green backlit LCD display b b b
IEC or IEEE menu mode b b b
Digital output pulse - 2 -
Communication
RS485 (one port) - - 2-wire
Modbus protocol - - b

Power Meter Series 200.

1 Mounting slots.
2� RS485 communications (PM210) or
2 pulse outputs (PM200P).
3� Heartbeat LED.
4 Power supply.
5 Voltage inputs.
6 Current inputs.

432E2300_Ver2.0.indd/
 Power-monitoring units Power Meter Series 200
Functions and characteristics (cont.)

Electrical characteristics
Type of measurement True rms up to the 15th harmonic on single -
PB100710

or three-phase (3P, 3P + N) AC systems

32 samples per cycle
Measurement Current and voltage 0.5 % of reading from 20 % to 120 %
accuracy Power 1%
Frequency +0.01 Hz from 45 to 65 Hz
Active energy IEC 62053-21 Class 1
Reactive energy IEC 62053-23 Class 2
Data update rate 1s
Input-voltage Measured voltage 10 to 480 V AC (direct Ph-Ph)
10 to 277 V AC (direct Ph-N)
0 to 1600 kV AC (with external VT)
Metering over-range 1.2 Un
Impedance 2 MW (Ph-Ph) / 1 MW (Ph-N)
Frequency range 45 to 65 Hz
Rear view of Power Meter Series 200. Input-current CT ratings Primary Adjustable from 5 A to 32767 A
Secondary 5 A starting at 10 mA
Measurement input range 0 to 6 A
Permissible overload 10 A continuous
50 A for 10 seconds per hour
120 A for 1 second per hour
Impedance < 0.12 W
Load < 0.15 VA
Control power AC 115 to 415 ±������������������
�� 10
�����������������
% V AC, 5 VA; 50
�����������
to 60 Hz
DC 125 to 250 ±20 % V DC, 3 W
Ride-through time 100 ms at 120 V AC
Output Pulse output (PM200P) Static output 240 ±10 % V AC, 100 mA max. at
25 °C, (derate 0.56 mA per °C above 25°C), 2.41
kV rms isolation, 30 W on-resistance at 100 mA
Mechanical characteristics
Weight 0.37 kg
IP degree of protection (IEC 60529) Designed to IP52 front display, IP30 meter body
Dimensions 96 x 96 x 69 mm (meter with display)
96 x 96 x 50 mm (mounting depth)
Environmental characteristics
Operating Meter 0 °C to +60 °C
temperature Display -10 °C to +50 °C
Storage Meter + display -40 °C to +85 °C
temperature
Humidity rating 5 to 95 % RH at 50 °C (non-condensing)
Pollution degree 2
Metering category (voltage CAT III, for distribution systems up to
inputs and control power) 277 V Ph-N / 480 V AC Ph-Ph
Dielectric withstand EN 61010, UL508
Double insulated front panel display
Altitude 3000 m
Electromagnetic compatibility
Electrostatic discharge Level III (IEC 61000-4-2)
Immunity to radiated fields Level III (IEC 61000-4-3)
Immunity to fast transients Level III (IEC 61000-4-4)
Immunity to impulsive waves Level III (IEC 61000-4-5)
Conducted immunity Level III (IEC 61000-4-6)
Immunity to magnetic fields Level III (IEC 61000-4-8)
Immunity to voltage dips Level III (IEC 61000-4-11)
Conducted and radiated emissions e commercial environment/FCC part 15 class B
EN 55011
Harmonics IEC 61000-3-2
Flicker emissions IEC 61000-3-3
Safety
Europe CE as per IEC 61010-1
U.S. and Canada UL508
Communication
RS485 port (PM210) 2-wire, up to 19200 bauds, Modbus RTU, SELV
circuit, 6 kV impulse (double insulation)
Display characteristics
Dimensions 73 x 69 mm Back-lit green LCD
(6 lines total, 4 concurrent values)
Firmware characteristics
Min./max. Worst min. and max. with phase indication for
voltages, currents and THD.
Min. and max. values for power factor,
power (P, Q, S) and frequency

432E2300_Ver2.0.indd/
432E2300_Ver2.0.indd/