Product Attributes Clean (LESS sstnigue dirt-repellent properties that washes off with every rain é. stay Extreme Weather Resistance Provides complete weather protection from rain, heat and humidity Looks matter Hastich, soft sheen finish that enhances the beauty of your house Keeps house cool. Has advanced heatereftecting ‘technology zo keep the interiors cooler Green Pro Certified Validates our effortin striving towards ‘leaner, more sustainable future. ITC) actsér ‘Conforms to ISI/IGBC & GRINA Specifications PREMIUM EXTERIOR SMOOTH EMULSION Product Description WeatherCoat Smooth is a 100% acrylic~based exterior emulsion that can withstand extreme weather conditions, It has unique additives and pigments. ‘which provides long-lasting weather protection from rain, heat and humidity. Recommended Use Exterior plastered surfaces and concrete blocks veRv eH ste, a Hic i@) == | (Af 5 ee sort Sreen over 2,000 shades mihSofe sheen Voc 36.9 grit Coverage 60-70 sq.ft/It/2.coats, under ideal test conditions. (Coverage may depend on factors like surface conditions, surface preparation, application skill, weather conditions, dilution etc) Recommended Undercoats Primer: For wall plastered surfaces - WeatherCoat Exterior Primer Putty: For wall plastered surfaces ~ Bison Wall Putty Recommended Surface Sand, cement plaster, asbestos, brickwork, concrete block and fiberboards =I 7 Peed ‘SD: 25-35 min depending on weather _ Maximum dilution should be 10-15 % conditions depending on shade. Coverage may be HD:3-4 hours, {ess compared to light shaces. siatonnaos reonnenie rine STL ff Brush /Roller/Spray Potable water es ccs wih 6 Brush: 400 ml of water/IL emulsion 4-Bat 60° CH when released‘Conforms to ISI/IGBC & GRINA Specifications WEATHERCOAT FR Pamala lel Selo Meo) Surface Preparation © © For feesh/new surfaces: Strip all loose Apply 1 or 2 coats of Berger Bio-Wash particles from the surface with wire solution (S8v/y) and allow It to dry brushing and by scraping, followed by 2 overnight. ‘wipe down. Wath the surface down with water and alow ito dy our EUREIUINEMESIRINEEPREENN 251 aain the next day with potable Apply one coat of primer andallow tory ern ener ‘rater Allow te srface to ry fly fere-ahours. Bases sousy Pa For Previously Painted Surfaces: Strip ll he old paint and remove ll he loose PO, WI, N, NI, N2, Cream, Yellow, articles before starting the above process. Brown and White p ne ™ Directions for Application Dilute the paint as per the recommended dilution ratio. Apply the first finishing coat and allow it to dry fora least 6-8 hours, After the frst coat dries, apply the second coat and allow it to dry overnight. Special Note Points to Note Before painting, the |» Shake well before use and do not over dilute fellowing tings pretHosard Close following tings 1» strain the material tough afin sieve before use Non: flammable thoroughly: > Keep the container tightly closed to prevent drying > Ideal moisture |» Scrape off old paint thoroughly before painting > Ideal pH value of ‘content of the starts wall should be is ( pasnow > Gyro shake wel after tinting through C8 Machine > Donot apply paint on ime washed surfaces or ‘the wall surface dampwall should be > Keep out of reach of children and away from between 7-1 foodstuff Pot Life of Thinned Material Overnight > Incase of contact with eves, wash immediately ‘with water and seek medical help Pee ee eee ee eee ee Pe ODL Pec neta cm eae ete ene eee setts