Scribd
Upload
14K views1 page

Sop For Operation & Cleaning of Bottle Filling Machine

This document outlines the procedure for operating and cleaning a bottle filling machine. It defines the purpose, responsibilities, and scope. The procedure has three stages: pre-operative cleaning and setting, operation, and post-operative cleaning. The first stage involves cleaning the exterior of the machine, restoring electrical connections, and removing/adding labels.

Uploaded by

Prince Moni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
14K views1 page

Sop For Operation & Cleaning of Bottle Filling Machine

This document outlines the procedure for operating and cleaning a bottle filling machine. It defines the purpose, responsibilities, and scope. The procedure has three stages: pre-operative cleaning and setting, operation, and post-operative cleaning. The first stage involves cleaning the exterior of the machine, restoring electrical connections, and removing/adding labels.

Uploaded by

Prince Moni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Operation and Cleaning of Bottle Filling Machine.

1) PURPOSE : To lay down a Procedure for Operation and Cleaning of


Bottle Filling Machine.
2) RESPONSIBILITY : Q/C Manager.

3) ACCOUNTABILITY : Production Manager/Q.A. Manager

4) SCOPE : The procedure of this SOP shall be applicable to


Production Department of Sarthak Biotech Pvt. Ltd.,
Karnal.

5) PROCEDURE :

MACHINE NAME Bottle Filling Machine M/C No.:


_____________

The entire Machine Operation & Cleaning procedure is divided in three stages.

i) Pre-operative Cleaning & Setting.

ii) Operation

iii) Post Operative Cleaning and equipment preparation.

STAGE – I
a) The exterior of the machine is cleaned with dry cloth

b) The electrical connections are restored by pulling the plug top into the
socket.

c) The “MACHINE READY FOR USE” sticker is removed and sticker/tag


showing product Batch No. etc. is put on the top cover of the machine.

d) The filling syringe inlet pipe fitted with the filling machine is cleaned by
D.M. water.

e) Empty glass bottle kept near the filling machine.

You might also like