Scribd
Upload
85 views

AT92M

This document provides specifications for the COMROD AT92M 30-foot HF marine transmitting antenna. The antenna is designed for marine coastal and HF telephony bands between 1.6-30 MHz. It has an electrical length of 8.5 meters, power rating of 1.5 kW PEP, and vertical polarization with an omnidirectional pattern. Mechanically, it is a self-supporting fiberglass rod 9 meters high that can withstand winds up to 125 mph. Impedance measurements are provided for the antenna mounted on a 2-meter steel pipe over a flat steel roof with a 2-meter feedline.

Uploaded by

Qoo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
85 views

AT92M

This document provides specifications for the COMROD AT92M 30-foot HF marine transmitting antenna. The antenna is designed for marine coastal and HF telephony bands between 1.6-30 MHz. It has an electrical length of 8.5 meters, power rating of 1.5 kW PEP, and vertical polarization with an omnidirectional pattern. Mechanically, it is a self-supporting fiberglass rod 9 meters high that can withstand winds up to 125 mph. Impedance measurements are provided for the antenna mounted on a 2-meter steel pipe over a flat steel roof with a 2-meter feedline.

Uploaded by

Qoo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AXBY-MAR-SD-0005.

pub
Prod.: 30.3.15
COMROD AT92M
30' - 9 m HF Marine Transmitting Antenna

Application:
AT92 is a high performance glassfibre transmitting antenna for
marine coastal and HF telephony bands (simplex and duplex
SSB). It matches well all modern SSB marine telephony trans-
mitters & transceivers.

The antennas can be part of any MF/HF communication system


but is specially designed to satisfy the demands of the GMDSS.

Electrical specifications:
Frequency range 1.6-30 MHz
Power rating 1.5 kW PEP
Impedance See separate section
Polarization Vertical
Pattern Omnidirectional
Electrical length 8.5 m (28 ft)

Mechanical specifications:
Design Self supporting fiberglass rod with aluminum mounting
hardware.
Height 9 m (30 ft)
Weight 8 kg
Sections Base: AXB42 Bracket, side feed
Top: APB50
Wind rating 55 m/s = 125 mph
Moment of flexure 120 kpm at 55 m/s
Deflection due to wind load 5.8 m (19 ft) at tip ball at 55 m/s wind load
3.8 m (12.5 ft) at tip ball at 33 m/s wind load
Finish Polyurethane lacquer, white
Temperature range -55 0C, +70 0C, -67 0F, +160 0F
Ice build-up Not affected

Specifications subject to change without notice, the information in this document does not form part of any quotation or contract

Comrod A/S, N-4124 Tau - Norway. Telephone (+47) 51740500. Telefax (+47) 51740501. E-mail: [email protected]
Mounting: Previous

Mounting by means of U-bolts (included) Mast/wall mounting.

Impedance Measurements:
Antenna mounted on a 2m steelpipe over flat steel roof. Feed line 2m

Frequency Transmitting Antenna


(MHz) 9m
1.6 4-j950
2.0 5-j720
3.0 6-j400
4.0 10.2-j259
5.0 17.9-j123
6.0 30-j8.4
7.0 50+j103.6
8.0 84.5+j226
10.0 298+j570
12.0 1593+j479
16.0 127.8-j391
18.0 58.1-j137
22.0 180.2-j380
25.0 997-j68
30.0 130.4-j160.6

You might also like