Scribd
Upload
177 views

I.tech VoiceClip 1100 Quick Start Guide - v1

The headset comes with a built-in rechargeable battery that requires 3 hours to fully charge. To pair the headset, press and hold the multifunction button for 5 seconds until the indicator flashes blue and red, then select the headset in the phone's Bluetooth settings. The headset turns on with a short beep and blue light flashes, and turns off with a long beep and red light for 2 seconds.

Uploaded by

TRIANT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views

I.tech VoiceClip 1100 Quick Start Guide - v1

The headset comes with a built-in rechargeable battery that requires 3 hours to fully charge. To pair the headset, press and hold the multifunction button for 5 seconds until the indicator flashes blue and red, then select the headset in the phone's Bluetooth settings. The headset turns on with a short beep and blue light flashes, and turns off with a long beep and red light for 2 seconds.

Uploaded by

TRIANT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VoiceClip 1100

1
Quick Start Guide
1. Multifunction Button (MFB)
• Power On / Off
• Pair with Mobile Phone
• Answer / End Calls
2. Micro USB Charging Socket 2
3. Status Indicator 3

Charging Your Headset


The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is
recommended to fully charge the battery.
Insert the charger's plug into the headset's USB charging socket and plug the main charger to an AC wall
outlet or plug to the PC / notebook.

Use only the supplied charger / USB charging cable to charge the headset.

Headset Status Status Indicator Light


Charging (OFF MODE) Solid red
Fully charged (OFF MODE) OFF
Low battery Flash red with short beep every minute
3 hours are required to fully charge the headset.
* Warning: Do not use the headset while it is connected to the charger.

Pairing Your Headset Manually for the First Time


1) Ensure the headset is off.
2) To activate the pairing mode, press and hold the headset's MFB for 5 seconds
without releasing your finger until its status indicator flashes blue and red alternately.
3) Activate your mobile phone's Bluetooth to search surrounding Bluetooth devices,
select “VoiceClip 1100” and enter the passcode “0000”. When the pairing is completed, the
headset's status indicator will flash blue rapidly 5 times and you can hear a long beep.
Basic Operation
Function Button Alert tone Status indicator
POWER ON Press & hold the
MFB for 5 sec. Short beep Flash blue light 3 times
When you turn on your headset for the first time, the headset proceeds into pairing mode, i.e. the status
indicator flashes blue and red alternately, so that you can immediately pair it with your mobile phone.
Press & hold the
POWER OFF Long beep Red light for 2 sec.
MFB for 2 sec.
Ringtone through the
Incoming call Blinking purple
earphone with Vibration
Answer / End a call Press the MFB once
Voice command Press the MFB once Short beep
Last number redial Double press the MFB Short beep
Toggle vibrator on/off Press & hold the MFB
for 1 sec. at Long beep
standby mode
Toggle mute / unmute Press & hold the MFB for
Long beep
during the call 1 sec. during the call

v1.0

You might also like