Scribd
Upload
477 views2 pages

Ez Spot

Ezdpot

Uploaded by

Waleed Barakat Maria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
477 views2 pages

Ez Spot

Ezdpot

Uploaded by

Waleed Barakat Maria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT DATA SHEET

EZ SPOT®
PIPE-FREEING AGENT

Product Description

®
EZ SPOT pipe-freeing agent can be mixed with base oil and water to rapidly create an invert emulsion that is
effective stuck pipe pill. EZ SPOT pipe-freeing agent lubricates and dehydrates filter cake from water-based
fluids to aid in breaking the cake apart to help alleviate differentially stuck drill pipe. EZ SPOT pipe-freeing agent
is preferred when a weighted spot is desired to match the system density and can be used as a spacer fluid
between oil based drilling fluids and cement.

Applications/Functions
» Formulate a pill to help release differently stuck pipe
» Helps prevent interfacial thickening of oil-based mud and cement during cementing
» Helps emulsify water in oil-based fluids

Advantages

» Thermally stable at temperatures up to 400°F (205°C)


» Can be formulated with varying oil/water ratios
» Liquid concentrate for ease of addition
» Easily weighted with any weighting agent

Typical Properties

» Appearance: Thick, brownish-green liquid


» Flash Point, PMCC: 88°F
» Flash Point, PMCC: 31°C
» Specific gravity: 0.98

Recommended Treatment

See the table for the amounts of base oil, barite, water and EZ SPOT pipe-freeing agent fluid concentrate for
100 bbl (16 m³) of spotting fluid.

®
An additional viscosifier such as GELTONE II may be required to suspend barite in weighted fluids.

EZ SPOT and GELTONE are registered trademarks of Halliburton. © 2016 Halliburton. All rights reserved. Because the conditions of use of this product are
beyond the seller's control, the product is sold without warranty either express or implied and upon condition that purchaser makes its own test to determine the
suitability for purchaser's application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in manufacture or
packaging or if damaged. Except for such replacement, seller is not liable for any damages caused by this product or its use. The statements and
recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however.

halliburton.com/baroid
PRODUCT DATA SHEET

Packaging
EZ SPOT pipe-freeing agent is packaged in a variety of sizes including 15-gal (56.7-l), 55-gal (208-l) drums in
bulk, and others.

EZ SPOT Fluid: Spotting Fluid Formulation for 100 bbl (16 m³).
Density, lb/gal 7.3 10 12 14 16 18

Oil/Water Ratio 70/30 70/30 70/30 70/30 82/18 82/18

Base Oil, bbl 65 58 54 49 51 44

EZ SPOT fluid, drum 6 6 6 6 6 6

Water, bbl 28 26 22 21 11 10

BAROID® material, 100lb sacks (45.4 kg) - 140 250 350 465 570

EZ SPOT and GELTONE are registered trademarks of Halliburton. © 2016 Halliburton. All rights reserved. Because the conditions of use of this product are
beyond the seller's control, the product is sold without warranty either express or implied and upon condition that purchaser makes its own test to determine the
suitability for purchaser's application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in manufacture or
packaging or if damaged. Except for such replacement, seller is not liable for any damages caused by this product or its use. The statements and
recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however.

halliburton.com/baroid

You might also like