RESTRICTED

SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

TRENCHES, WELLS etc. Rate in Taka

Rock not
Per Cubic metre Soil requiring
blasting

1-1 Excavation in any soil upto1.5 metre depth in

foundation and pipe trenches upto1.5 metre wide in
shafts wells and independent holes up to 30 sq.m each
and throw earth clear of edges of excavation within 10 207.00 815.00
metre timbering to be paid extra (Trenches over 1.5
metre width will be treated as areas)

AREAS
1-2 Excavate over areas in any soil upto1.5 metre depth to
obtain earth for embankments or to clear building sites
etc or for shafts, well etc exc 30 sq.m each throw earth
221.00 722.00
clear of edges of excavation within 10 metre.

Add to item 1-1 for each additional 1.5metre lift or part

1-3 86.00 129.30
thereof.

1-4 Add to item 1-2 for -ditto-ditto- 21.00 29.00

EMBANKMENTS

Per Cubic metre

1-5 Making embankments, filling under floor or around
plinth etc 1.5 metre below or above ground level, with
spoil obtained from cantonment area within 10 metres
including watering and ramming in 15 cm layers and 131.00 174.00
dressing to required profile and shape.

1-6 Add to item 1-2 if earth supplied by contractor from

private land at his own cost excluding cutting. 204.00 -

19
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

1-7 Add to item 1-5 for additional 1.5 metre or part thereof
above or below ground level 21.00 29.00

20
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

LEAD Rate in Taka

Rock not
Per Cubic metre Soil requiring
blasting
1-8 Load excavated spoil on animal or into basket carts or
lorries, carry beyond 10 metre (Specified in items 1-1
and 1-2) up to 100 metre unload and stack or spread and 174.00 -
level.

1-9 Load materials on animal or into basket carts or lorries,

carry up to 100 metre unload and stack or spread and
level. 217.00 -

1-10 Add to item 1-8 and 1-9 for carrying beyond 100 metre
but up to 200 metre (Excluding unload and stack or
17.00 -
spread and level)

1-11 -Ditto-beyond 200 metre up to 1 km -ditto- 25.40 -

1-12 -Ditto-for each subsequent 1 km but up to 8 km 65.00 -

1-13 - Ditto - for each subsequent 1 km beyond 8 km but up

to 24 km 43.00 -

MISCELLANEOUS

Per Cubic metre

1-14 Excavate hill side slips or similar loose materials of any
description and remove to a distance not exceeding 25
metre and deposit where directed (To be converted into 231.00 -
solid measure)

Per Square metre

21
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

1-15 Finish the surface of existing embankments in repairs to

a neat and finished profile including making up where
necessary (Earth utilized from borrow pits for making
up to be paid for extra) 5.00 -

22
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

MISCELLANEOUS Rate in Taka

Rate Per Rate per

Per Cubic metre / Per Square metre
cu.m sq.m

1-16 Ramming earth in 15 cm layers 62.00 9.00

1-17 Watering to above - ditto - (in 15 cm layer) 52.00 8.00

Per Cubic metre

1-18 Bricks bats or other approved filling in soakage pits etc. 3380.00 0.00

1-19 Taking out bricks bats, boulders, rubbish etc from

soakage pits and dispose off as ordered (supply & filling
of bricks bats or other approved filling not included) 260.00 0.00

1-20 Pumping water from trenches etc including all labour

use of pumps plants etc, (The net quantity raised to be
paid for the lift not to exceed 8 metre. Conversion factor 98.70 0.00
1000 litre=1.00 cu.m)

1-21 Vitty / Hill sand filling under floor/plinth protection /

around building for site development including levelling
& dressing complete (To be converted to packed / loose 629.00 0.00
measure) Rate inclusive of any lead and lift.

ANTI-TERMITE TREATMENT OF
FOUNDATION
Per Square metre Rate in Taka
1-22 Spraying anti termite chemical mixed with water (1: 19)
on the sides and bottom of foundation trench, under
floor and over plinth filling using Dursban 20 EC or
- 373.00
equivalent chemical (solution to be sprayed @ 5 litres
per sq.m)

23
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

1-23
Spreading anti termite chemical on the side and bottom
of foundation trench, under floor and over plinth filling
- 88.00
using pesticide pestearthy powder of Baral Chemical
Co.(BCCL)

24
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

ANTI-TERMITE TREATMENT AROUND BUILDING Rate in Taka

Per Cubic metre

1-24 Extra cost for using anti termite chemical in brick works
in foundation using DURSBAN 20 EC or equivalent
chemical (solution to be prepared with water in
proportion 1:19) Chemical required 5 litre per 2.85 cu.m 2713.00
of brick works

1-25 Extra cost for using anti termite chemical in brick works
in foundation using Pestearthy powder of Baral
Chemical Co.(BCCL) required 1(one) kg per 4.11 cu.m 694.00

Per Square metre

1-26 Extra cost for using anti termite chemical in brick works
in foundation using DURSBAN 20 EC or equivalent
chemical (emulsion to be sprayed in proportion 1:19)
557.00
Chemical required 7.5 litre per sq.m

1-27 Extra cost for using anti termite chemical in brick works
in foundation external surface using 'Pestearthy' powder
of Baral Chemical Co.(BCCL) required 1 (one) kg per 98.00
27.87 sq.m .

Per Hole Rate in Taka

1-28 Termite treatment in existing structures by making
downwardly slanted holes at a depth of 225 mm from
the existing finished GL/FL inside and outside the
building and applying the emulsion of antitermite
chemicals dursban 20 EC to be mixed with water at 1:19 63.00
ratio in to holes at rate of 25 ml per hole including
making good the damages.

25
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

1-29 Termite treatment in existing structures by making

down wordly slanted holes at a depth of 250 mm from
the existing finished GL/FL inside and outside the
building and applying the emulsion of antitermite
chemicals pestonal A & B of Baral Chemical 51.00
Co.(BCCL) to be mixed with water at 1:50 ratio in to
holes at rate of 8 ml .

26
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

Per Metre
Rate in Taka

1-30 Trench treatment for protect in coming termite by

making trench around existing building structured at a
depth of 600mm from GL and applying entitermite
chemical "Pestearthy" of Baral Chemical Co.(BCCL) in
three layers 600mm wide including earth filling in the 407.00
trench etc chemical sprayed by hand.

1-31 Trench treatment for protect in coming termite by

making trench around existing building structured at a
depth of 750mm from GL and applying entitermite
chemical "Dursban 20 EC" or quivalant chemical
1212.00
solution mixed with water at 1:19 ratio in three layers
450mm width including earth filling in the trench etc
solution to be sprayed @ 5 litre per sq.m..

ANTI-TERMITE TREATMENT AROUND BUILDING Rate in Taka

Per Cubic metre

1-32 Fumigation treatment against mosquitoes, flies, spiders,

silverfish, cockroaches, lizards and other harmful pests
inside the buildings etc. using NEOCIDOL-60 or
23.30
equivalent chemical as spd. Chemical to be Sprayed @
7 ml per cum.

Per Square metre

1-33 Anti-Termite treatment of all wooden door frames,

windows, wood panelling etc by using DURSBAN
20EC or equivalent emulsion at ratio of 1:19 198.00
(DURSBAN 20EC and kerosene)

27
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

1-34
Anti termite treatment of all wooden doors frames
window, wood panalling etc by using pesto-clea
chemicals of Baral Chemical Co.(BCCL) mixed with 114.00
water at ratio of 1:16 per ltr Pesto-clea A & B canbe
sprayed about 50 sqm.

28
RESTRICTED
 RESTRICTED
SECTION-1
EXCAVATION & EARTH WORK RATES

Item Description of works

Per Board
Rate in Taka

1-35 Anti-Termite treatment of electric and telephone system

by inserting a plugging material (cotton foam etc.) with
anti-termite chemical DURSBAN 20EC etc. 331.00

1-36 Anti-termite treatment of Electric & Telephone system

by inserting & plugging materials with anti-termite 190.00

chemical pestonol of Baral Chemical Co.(BCCL) .

Per Nest

1-37 Destruction of termite nests with earth work (1.00 x

1.50 x 1.00 metre) and DURSBAN 20EC @ 1.10 litre 2984.00

1-38 Destruction of termite nests with earth work (1.00 x

1.50 x 1.00 meter) and pestearthy of Baral Chemical 1975.00
Co.(BCCL) chemical @ 0.25 kg.

29
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description

COLLECTION OF MATERIALS

Per Cubic metre Rate in take

2-1 Collection of sand, bajri and shingle within a radius of
25 Metre and stacking to template (1/12th to be
deducted from measurement of stacks for voids) 212.00

2-2 Ditto, boulders ditto (15% to be deducted from 170.00

measurement of stacks)

2-3 Screening bajri, shingle or road metal as directed and

stacking to template (measurement to be taken before 130.00
screening).
Rate in Taka
Gauge in centimetre

0.60 to 2.50 to
5.00 6.25
1.87 3.75

2-4 Breaking stone to gauge as ordered

and stacking to template. 2040.00 1697.00 1189.00 844.00

BOTTOMING
Per Square metre Spread thickness in centimetre
7.50 12.50 15.00 25.00
2-5 Bottoming as specified, using well
burnt brick (Without consolidation) 376.00 622.00 748.00 1240.00

Spread thickness in centimetre

10 cm 15 cm
2-6 Bottoming as specified, using
boulders exc 75mm n.exc 255 mm 685.00 1071.00
dia as specified

WATER BOUND MACADAM CARPETS

Consolidated Thickness in mili
Per Square metre metre

75.00 100.00 150.00

31
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
2-7 Waterbound macadam carpets as
specified using bricks aggregates 578.00 768.00 1146.00

2-8 Water bound macadam carpets as

specified using Stone aggregates 798.00 1068.00 1646.00

32
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
WATER BOUND MACADAM CARPETS
Per Cubic metre Rate in Taka
2-9 Providing compacted aggregate & sand sub base course
with 38 mm down well graded 1st class bricks chips
and sand of FM 1.00 mixed in proporation 1:1 including
mixing properly, watering, compacting mechanically to 5448.00
give compaction to 100%.

2-10 Providing compacted aggregate & sand sub base course

with 38 mm down well graded 1st class bricks chips
and sand of FM 1.00 mixed in proporation 2:1 including
mixing properly, watering, compacting mechanically to 6394.00
give compaction to 100%.

2-11 Supply and filling of Khoa (38mm to 63mm graded) &

sand (1.50 FM) in Proportion (1:1) mixed all properly,
watering, and compacting mechanically to give
compaction 100% as spd and direction of Engineer in 5789.00
charge.

ROLLING
Per Square metre Rate in Taka

2-12 Roll and consolidate formation surface by animal or

power rollers including filling in depressions with hard 7.00
spoil.
2-13 Cut or fill in soft or hard soil n exc. 15 cm dry roll and
consolidate formation surface by ditto including ditto. 43.00

2-14 Turfing with sods available within 125 metre lead 33.00
including watering

Rate in Taka

Spread Thickness in cm

Per Square metre 10.00 15.00

33
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
2-15 Roll and consolidate bottoming (boulders) dry rolled to
a solid even finish animal or power rollers including
14.00 18.00
filling in depressions with spoils of bottoming materials.

34
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
Using shingle or
PREMIX CARPET Gravels
Materials except
Per Square metre
and Labour Bitumen

2-16 Premix carpet 25 mm thick consolidated on bituminous

surface as specified including tack coat 536.00 361.00

Using shingle or gravels

PREMIX CARPET / Crushed stone

Materials except
Per Square metre
and Labour Bitumen

2-17 Premix carpet 38 mm thick consolidated on bituminous

surface as specified including tack coat (Using shingle
793.00 547.00
or graval)

2-17A - Ditto - but (Using crushed stone 19 mm) 914.00 668.00

2-18 Premix carpet 50 mm thick consolidated on bituminous
962.00 645.00
surface as specified including tack coat (Using shingle
or graval)
2-18A - Ditto - but (Using crushed stone 19 mm) 1125.00 809.00
2-19 Premix carpet 25 mm thick consolidated on non-
bituminous surface as specified including tack coat 601.00 392.00
(Using shingle or graval)
2-19A - Ditto - but (Using crushed stone 19 mm) 681.00 472.00

2-20 Premix carpet 38 mm thick consolidated on non-

bituminous surface as specified including tack coat 829.00 550.00
(Using shingle or graval)
2-20A - Ditto - but (Using crushed stone 19 mm) 950.00 670.00

2-21 Premix carpet 50 mm thick consolidated on non-

bituminous surface as specified including tack coat 1060.00 710.00
(Using shingle or graval)
2-21A - Ditto - but (Using crushed stone 19 mm) 1224.00 873.00

35
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
SEMI-GROUTING
Per Square metre
2-22 75 mm thick (compacted) semi-grouting with brick aggregate
and hot bitumen laying and spreading aggregate 113mm
(loose) in two layers of 75mm and 38 mm to proper camber
level, grade & super elevation and spreading hot bitumen
@1.70 kg per square metre on the 1st layer and 2.50 kg per
sq.m on the 2nd layer and rolling hard to full compaction
with 8 to 12 M.Ton power driven roller including heating 1147.00 788.00
bitumen 1750 (degree) C to 190 degree C temperature
complete as per direction of Engineer-in-charge including
tack coat @1.00kg of bitumen per square metre of road
surface.

2-23 -Ditto-ditto- but using stone aggt.-ditto- as specified. 1397.00 1038.00

Using shingle or
SEAL COAT Gravels
Materials exc.ept
Per Square metre
and Labour Bitumen
2-24 Seal coat on freshly laid premix carpeting surface using
0.60 kg Bitumen and 0.01 cubic metre of sand (FM2.5)
per sq.m of premixed surface incl. spreading with
proper camber & grade & blinding with sand (FM0.80) 141.40 100.00
@ 0.01 cubic metre including cost of all materials
rolling with 8 to 10 M. Ton power driven roller (Tack
coat not required)

2-25 Premix Bituminous, seal coat (Av. thickness 10 mm)

with 0.015 cu.m of pea gravels mixed with 1.20 kg of
bitumen (grade 80/100) and laid over 1 (one) sq.m of
bituminous / non-bituminous road surface including 232.00 149.00
spreading with proper camber and grade and blinding
with dry sand @ 0.01 cu.m including cost of 8 to 10 M.
Ton power driven roller etc complete (without Tack
2-26 - Ditto - but using 60/70 grade bitumen with
75% pea gravel & 25% of sylhet sand FM 2.5 234.00 142.00
(without tack coat)
2-27 Add if applied bitumen as tack coat on old bituminous
surface (For seal coat) 66.00 32.00

2-28 Providing tack coat on non-bituminous surface using 82.00 31.00

bitumin grade 80/100 (For seal coat)

36
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
2-29 - Ditto - but using 60/70 grade bitumen 86.00 32.00

37
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
REPAIRS ETC.
exc.ept
Materials and
Per Square metre Hot/cold
Labour
Dressing

2-30 Scarifying water bound macadam surface by hand or by

power roller n.exc 5 cm deep incl. removing n.exc 50 39.60 -
metre and stacking for re-use

2-31 Add to the last item for every 2.5 cm or part there of
beyond 5 cm deep including ditto. 13.20 -

2-32 Repair to pot holes n.exc 0.10 sq.m each in surface of roads
by scarifying surface cutting edges at least 2.50 cm deep
sweeping free from dust and mud , coating surface with
hot/cold dressing and filling with premix of shingle and 584.00 375.00
hot/cold dressing and well ramming. Hot dressing (Using
shingle or gravel)

2- Repair to pot holes n.exc 0.10 sq.m each in surface of roads

32A by scoring surface cutting edges at least 2.50 cm deep
sweeping free from dust and mud , coating surface with
664.00 456.00
hot/cold dressing and filling with premix of shingle and
hot/cold dressing and well ramming. Hot dressing (using
crushed stone)
CONCRETE ROADS Concrete Mix
LANDING GROUNDS ETC 1:3:6 1:2:4

Materials exc.ept Materials and exc.ept

Per Square metre and Labour Cement Labour Cement

2-33 Cement concrete slabs for roads,

hardstanding, landing grounds etc.
15 cm thick using crushed stone
including use & waste of form work 1257.00 1005.00 1433.00 1051.00
(Wooden or steel as ordered ) and
finished surface even and fair (Not
smooth) using 50% sand FM 1.80
and 50% sand FM 2.5 and above
2-34 -Ditto-using gravel -ditto- 1071.00 819.00 1242.00 859.00

2-35 -Ditto-using brick aggt. -ditto- 959.00 707.00 1392.00 942.00

38
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
2-36 Cement concrete slabs for roads,
hardstanding , landing grounds etc. 20
cm thick using crushed stone including
use & waste of form work (Wooden or 2085.00 1689.00 1840.00 1330.00
steel as ordered ) and finished surface
even and fair (Not smooth) - Ditto -

2-37 -Ditto-using gravel-ditto- 1620.00 1225.00 1595.00 1085.00

2-38 -Ditto-using brick agg. -ditto- 1483.00 1087.00 1718.00 1118.00

39
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description

Per Cubic metre Taka

2-39 Sand cushion in layer as specified, under concrete

roads, hardstanding, landings ground etc using sand 571.00
FM 0.80
EXPANSION JOINTS
Per Square metre

2-40 Labour & necessary materials for forming expansion

joint 12 mm wide & leaving the joints clear for filling
223.00
(Length of joint multiplied by thickness of slab)

2-41 Filling expansion joint with hot bitumen mixed with

sand @ 3.18 kg of bitumen per 0.028 cu.m of sand 389.00

BITUMEN PAINTING ON SEAL COAT

Per Square metre Rate in Taka

2-42 One coat bitumen applied hot on seal coat @ 7kg per 10 sq.m
and blinded with sand 1.00 FM @ 0.122 cu.m. per 10 sq.m
109.00
(including cleaning of surface)

2-43 - Ditto - but using 60/70 grade bitumen 113.00

2-44 Scarifying water bound macadam surface by hand or by
power machine n. exc. 5 cm deep incl. removing to store. 61.00

2-45 Add to the last item for every 2.5 cm or part there of beyond
5 cm deep including -ditto- 20.00

2-46 Premix carpet 35 mm thick consolidated used 19mm crushed

stone 20%, 12mm crushed stone 38% , stone dust 27%, and
sylhet sand 2.5 FM 15% and Bitumen 60/70 grade made with
asphalt plant incl. carring, laying, levelling & rolling with 871.00
tendered roller & type roller as spd. (Cosidering Length
minum 1 kilo miter lenght)

2-47 Labour & necessary materials for forming expansion joint 12

mm wide & leaving the joints clear for filling (Length of joint
multiplied by thickness of slab) and filling expamsion joint
with metalic coalter epoxy/tera & transparent mixed with a
755.00
ratio 3:1 and apply to expansion joint within 30 minutes after
mixed. including cutting shaping and making proper channel
expansion joints all as per direction of engineer in charge.

40
RESTRICTED
 RESTRICTED
SECTION-2
ROAD WORK, HARDSTANDINGS AND LANDING GROUNDS RATES

Item Description
Materilal Except
and labour cement
2-48 150mm thick RCC slab for roads, hard standing, ground etc
using crushed stone including necessary form work and finish
surface even or fair (not smooth) with ratio 1:2:4 using 50% 1862.00 1453.00
sylhet sand and 50% local sand all as spd ( steel Rft
measured separately)

41
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
FOUNDATION
Per Cubic metre Rate in Taka
3-1 Lime concrete 1:2.5:5 using bricks aggregate
graded as specified 11,753.00

Concrete Mix
1:2:4 1:3:6 1:4:8
Materials Except Materials Except Materials & Except
Per Cubic metre & Labour cement & Labour cement Labour cement

3-2 Cement concrete using

bricks aggregate graded
as specified using 1/3
sylhet sand FM 2.5 & 8849.00 5822.00 7657.00 5679.00 7116.00 5633.00
2/3 local sand (F.M 1.5)

Concrete Mix
CAST IN SITU 1:2:4 1:3:6

Materials Except Materials & Except

Per Cubic metre & Labour cement Labour cement

3-3 Cement concrete using bricks aggregate

graded as specified in walls, sills, coping
channels drains, steps, kerbs string course,
corbels, pier caps, hinge stones, bed plate
etc including form work (using 1/3rd sylhet 9619.00 6592.00 8428.00 6450.00
& 2/3rd local sand) and fair faces to
exposed surfaces (Ground floor)

3-4 Add additional rate for each floor up to 5th 215.50 - 215.50 -

3-5 - Ditto - but for each floor from 6th upto 287.40 - 287.40 -
9th

3-6 - Ditto - but for 10th and above 335.00 - 335.00 -

3-7 Same as item no 3-3 but using crushed 12308.00 9281.00 11084.00 9107.00
stone.

3-8 Add additional rate for each floor up to 5th 215.50 - 215.50 -

93
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
3-9 - Ditto - but for each floor from 6th upto 287.40 - 287.40 -
9th

3-10 - Ditto - but for 10th and above 335.00 - 335.00 -

94
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
PRE CAST Solid Block Hollow Blocks

Materials Except Materials & Except

Per Cubic metre & Labour cement Labour cement

3-11 Cement concrete (1:3:6) using bricks

aggregate graded as specified in
building block walls including setting
8509.00 6390.00 6536.00 4947.00
and jointing in CM (1:6) Ground floor

3-12 Add additional rate for each floor up to 215.50 - 215.50 -

5th

3-13 - Ditto - but for each floor from 6th 287.40 - 287.40 -
upto 9th

3-14 - Ditto - but for 10th and above 335.00 - 335.00 -

REINFORCED Rate in Taka

Materials & Except

Per Cubic metre Labour Cement

3-15 Reinforced cement concrete 1:2:4 using bricks aggregate graded

as specified in foundation, solid floor etc including 1/3rd sylhet
FM 2.5 & 2/3rd local sand of FM 1.50 (reinforcement measured
separately) 9636.00 6609.00

3-16 - Ditto - but using crushed stone. 12324.00 9297.00

3-17 Reinforced cement concrete 1:2:4 using bricks aggregate graded

as specified in roof slab, sunshade, shelves requiring shuttering,
(Steel reinforcement measured separately) using sand 1/3rd
sylhet FM 2.5 & 2/3 rd local of FM 1.50. Ground floor 12474.00 9447.00

3-18 Add additional rate for each floor up to 5th 215.50 -

3-19 - Ditto - but for each floor from 6th upto 9th 287.40 -

95
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description

3-20 - Ditto - but for 10th and above 335.00 -

96
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
REINFORCED Rate in Taka

Materials & Except

Per Cubic metre Labour Cement

3-21 Same as item no 3-17 but using crushed stone. 15973.00 12946.00

3-22 Add additional rate for each floor up to 5th 215.50 -

3-23 - Ditto - but for each floor from 6th upto 9th 287.40 -

3-24 - Ditto - but for 10th and above 335.00 -

3-25 Reinforced cement concrete 1:2:4 using bricks aggregate

graded as specified in columns, beams, stairs and landing,
posts, struts, piers, lintels, walls and the like incl. form
work (Steel reinforcement measured separately) using 13386.00 10359.00
sand 1/3rd sylhet FM 2.5 & 2/3 rd local of FM 1.50.
(Ground floor)

3-26 Add additional rate for each floor up to 5th 215.50 -

3-27 - Ditto - but for each floor from 6th upto 9th 287.40 -

3-28 - Ditto - but for 10th and above 335.00 -

3-29 Same as item no 3-25 but using crushed stone. 16074.00 13047.00

3-30 Add additional rate for each floor up to 5th 215.50 -

3-31 - Ditto - but for each floor from 6th upto 9th 287.40 -

3-32 - Ditto - but for 10th and above 335.00 -

3-33 Reinforced cement concrete 1:1.5:3 using bricks aggregate

graded as specified in roof, slabs, sunshade, shelves etc
requiring shuttering (Reinforcement measured separately)
using sand 1/3rd sylhet FM 2.5 & 2/3rd local of FM 1.50. 14119.00 10235.00
(Ground floor)

97
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
3-33A Reinforced cement concrete 1:1.5:3 using bricks aggregate
graded as specified special design cornice / corbel incl
form work (Reinforcement measured separately) using
grey cement, sand 1/3rd sylhet FM 2.5 & 2/3rd local of 13893.00 10011.00
FM 1.50. (Ground floor)

98
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
REINFORCED Rate in Taka

Materials & Except

Per Cubic metre Labour Cement

3-34 Add additional rate for each floor up to 5th 215.50 -

3-35 - Ditto - but for each floor from 6th upto 9th 287.40 -

3-36 - Ditto - but for 10th and above 335.00 -

3-37 Reinforced cement concrete 1:1.5:3 using crushed stone as

specified design cornice / corbel incl form work
(Reinforcement measured separately) using grey cement,
16917.00 13032.00
sand 1/3rd sylhet FM 2.5 & 2/3rd local of FM 1.50. except
chatai in ground floor.

3-38 Add additional rate for each floor up to 5th 215.50 -

3-39 - Ditto - but for each floor from 6th upto 9th 287.40 -

3-40 - Ditto - but for 10th and above 335.00 -

3-41 Reinforced cement concrete 1:1.5:3 using bricks aggregate

graded as specified as in columns, beams, stairs, posts,
struts, piers, lintels and the like including form work
(Reinforcement measured separately) using sand 1/3rd
14219.00 10335.00
sylhet FM 2.5 & 2/3rd local of FM 1.50. (Ground floor)

3-42 Add additional rate for each floor up to 5th 215.50 -

3-43 - Ditto - but for each floor from 6th upto 9th 287.40 -

3-44 - Ditto - but for 10th and above 335.00 -

3-45 Same as item no 3-41 but using crushed stone. 16828.00 12944.00

99
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
REINFORCED Rate in Taka

Materials & Except

Per Cubic metre Labour Cement
3-46 Reinforced cement concrete (RCC) 1:1.5:3 using 19mm
down graded crushed stone with ordinary portland cement
using 1/3rd Sylhet sand FM 2.50 & 2/3rd local sand FM 1.5
34764.00 30880.00
as in Rib Slab incl form work (excluding steel
reinforcement work) in ground floor.

3-47 Reinforced cement concrete (RCC) 1:1.5:3 using 19mm

down graded crushed stone with ordinary portland cement
using 1/3rd Sylhet sand FM 2.50 & 2/3rd local sand FM 1.5
49081.00 45196.00
as in Rib Beam using incl form work (excluding steel
reinforcement work) in ground floor.

3-48 Reinforced cement concrete (RCC) 1:1.5:3 fair face using

19mm down graded crushed stone with white & grey
cement in proportion 60:40 using 1/3rd Sylhet sand FM 2.5
& 2/3rd local sand FM 1.5 as in column, girder and beam 41965.00 40411.00
incl form work (excluding steel reinforcement work) in
ground floor.
3-49 Reinforced (RCC) 1:1.5:3 fair face using 19mm down
graded crushed stone with white & grey cement in
proportion 60:40 using sylhet sand FM 2.50 & 2/3rd local
sand FM 1.5 as in staircase, solid wall, box, duct etc. incl 47978.00 46424.00
form work (excluding steel reinforcement work) in ground
floor.

3-50 Add additional rate for each floor up to 5th 215.50 -

3-51 - Ditto - but for each floor from 6th upto 9th 287.40 -

3-52 - Ditto - but for 10th and above 335.00 -

3-53 Add to item 3-2 to 3-32 if pudlo or Foam lub of BCCL & Foam lub as
per Doses
other similar approved water proofing materials is added to chart rate shall
the cement at the rate of 5% by weight of cement for pudlo 9,921.00 be calculated

& Foam lub Qty as per doses chart shown in specefication

section.

100
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
3-54 Add to item 3-33 to 3-52 if pudlo or Foam lub of BCCL & Foam lub as
per Doses
other similar approved water proofing materials is added to chart rate shall
the cement at the rate of 5% by weight for pudlo & Foam 12,836.00 be calculated

lub Qty as per doses chart shown in specefication section.

101
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
EXPANSION JOINTS Rate in Taka

Materials & Except

Per Square metre
Labour Cement

3-55 Form expansion joints 12.5 mm wide in reinforced

concrete roof or floor slabs etc and fill in with molten PB-4 2,727.00 -

3-56 Copper Sheet 24 gauge in Expansion joints 8,791.00 -

3-57 Supply and fixing of 3mm thick Aluminium sheet for duct
/ expansion joints riveted with 38.10x38.10x4.76mm angle
frame fixed to wall with rawl bolt etc complete all as spd. 6,444.00 -

Per metre
3-58 Supply & fixing of 32x25x3mm size aluminium angle for
expansion joint seting with screw all as spd.
617.00 -

3-59 Supply, cutting and fitting of 115 mm Aluminium grove

cover for expansion joint complete with screw as required.
714.00 -

LIME TERRACING

Per Cubic metre

3-60 Lime Terracing (2:2:7) laid over roof slab as specified

using well burnt bricks aggregate, un slaked lime and clean
surkhi mixed together as specified, laying, spreading and
finishing etc complete (Single storied bldg) 16,231.00 -

3-61 Add additional rate for each floor up to 5th 215.50

3-62 - Ditto - but for each floor from 6th upto 9th 287.40

3-63 - Ditto - but for 10th and above 335.00

102
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
PCC PRE-CAST VENTILATOR Size
450x225 450x300
Each mm mm
3-64 Supply & Fixing of PCC pre-cast ventilator in position
made good with plaster etc complete. 196.00 154.00

Materials & Except

Per Cubic metre Labour Cement
3-65 Pre cast RCC (1:2:4) using brick agg. graded as in drain,
slab, barbed wire post, soakage pit slab etc with 1/3rd of
Sylhet sand FM 2.5 & 2/3rd of local sand FM 1.5 incl. 9087.00 6060.00
Form work (reinforcement measured separately)

3-66 Reinforced Cement Concrete (1:1.5:3) using crushed stone

Graded as specified as in foundation, solid floor etc incl.
1/3rd of Sylhet sand FM 2.5 & 2/3rd of local sand FM 1.50 12801.00 8916.00
(reinforcement measured separately)

3-67 Reinforced Cement Concrete (1:1.5:3) using Brick agg.

Graded as specified as in foundation, solid floor etc incl.
1/3rd of Sylhet sand FM 2.5 & 2/3rd of local sand FM 1.50 10028.00 6143.00
(reinforcement measured separately)

3-68 Brick aggregate filling under foundation using 38 mm

graded brick aggregate as spd. 100% compaction. 4646.00 -

3-69 Brick aggregate filling under foundation using 19 mm

down graded brick aggregate and sand (FM 1.5 and
cement consolidation under foundation in proportion 6566.00 -
12:8:1.
3-70 Supply and filling brick aggregate (50 mm down graded)
and sand (FM 1.50) consolidation under foundation in
proportion 1:1 ( With 100% compaction) 5573.00 -

Each

103
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
3-71 Reinforced cement concrete rail post fancy / decorative /
Victorian type with standard height for stair verandah,
parapet railing (25 mm to 75 mm average dia) including
299.00 -
one 10 mm dia MS Bar embedded vertically at middle and
finished as spd.

104
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
PILLING & MISC. Rate in Taka

Materials & Except

Per metre Labour Cement

3-72 Drilling / boring including equipments, fuels, lubricant,

bentonite and labour for cast in situ piling 400 mm dia
766.00 -
upto 20 metre long.

3-73 Add additional rate for drilling / boring including

equipments, fuels, lubricant, bentonite and labour for cast
in situ piling 400 mm dia exceeding 20 metre but not 32.00 -
exceeding 30 metre long.
3-74 Drilling / boring including equipments, fuels, lubricant,
bentonite and labour for cast in situ piling 450 mm dia 915.00 -
upto 20 metre long.

3-75 Add additional rate for drilling / boring including

equipments, fuels, lubricant, bentonite and labour for cast
38.00 -
in situ piling 450 mm dia exceeding 20 metre but not
exceeding 30 metre long.
3-76 Drilling / boring including equipments, fuels, lubricant,
bentonite and labour for cast in situ piling 500 mm dia
1,009.00 -
upto 20 metre long.

3-77 Add additional rate for drilling / boring including

equipments, fuels, lubricant, bentonite and labour for cast
42.40 -
in situ piling 500 mm dia exceeding 20 metre but not
exceeding 30 metre long.
3-78 Drilling / boring including equipments, fuels, lubricant,
bentonite and labour for cast in situ piling 550 mm dia
1,181.00 -
upto 20 metre long.

3-79 Add additional rate for drilling / boring including

equipments, fuels, lubricant, bentonite and labour for cast
in situ piling 550 mm dia exceeding 20 metre but not 59.00 -
exceeding 30 metre long.

3-80 Drilling / boring including equipments, fuels, lubricant,

bentonite and labour for cast in situ piling 600 mm dia
1,251.00 -
upto 20 metre long.

105
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
3-81 Add additional rate for drilling / boring including
equipments, fuels, lubricant, bentonite and labour for cast
in situ piling 600 mm dia exceeding 20 metre but not 62.00 -
exceeding 30 metre long.

106
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
Per Cubic metre Materials & Except
Labour Cement
3-82 Casting of cast in situ bored pile with reinforced cement
concrete works (1: 1.5 : 3) with stone chips to give a
minimum crushing strength of 20 Mpa using 100% sylhet 14271.00 10346.00
sand FM 2.5 (Except reinforcement).

Each
3-83 Providing and making point welding 6.00 -

3-84 Providing and making joint welding of minimum 300 mm 252.00 -

length.
3-85 Labour for breaking head of cast in situ bored pile / pre-
cast driven pile including repairing of pile head, 6636.00 -
straightening and bending of pile bars.

3-86 Conducting static load test (for design load 25 ton, test
load 50 ton) for the cast in situ / pre cast pile providing
required scaffolding, platform, manpower, equipment and 59209.00 -
necessary materials.

3-87 Conducting static load test (for design load 75 ton, test
load 150 ton) for the cast in situ / pre cast pile providing
required scaffolding, platform, manpower, equipment and 135238.00 -
necessary materials.

3-88 Conducting static load test (for design load 125 ton, test
load 250 ton) for the cast in situ / pre cast pile providing
required scaffolding, platform, manpower, equipment and 206334.00 -
necessary materials.

3-89 Conducting static load test (for design load 175 ton, test
load 350 ton) for the cast in situ / pre cast pile providing
required scaffolding, platform, manpower, equipment and 275754.00 -
necessary materials.

3-90 Conducting static load test (for design load 225 ton, test
load 450 ton) for the cast in situ / pre cast pile providing
required scaffolding, platform, manpower, equipment and 351776.00 -
necessary materials.

3-90A Integrity test of pile including all necessary equipments

4545.00

107
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
3-91 Conducting static load test (for design load 275 ton, test
load 550 ton) for the cast in situ / pre cast pile providing
required scaffolding, platform, manpower, equipment and 422448.00 -
necessary materials.

3-92 Add additional cost for intermediate loading of each 1520.00

additional ton -

Rate in Taka

Materials & Except

Per cu.m Labour Cement

3-93 Pre-cast pile (Size 300 x 300mm) with reinforcement

cement concrete (1:1.5:3) with stone chips and using 100%
Sylhet sand FM-2.5 (Except reinforcement) 18987.00 15062.00

3-94 Pre-cast pile (Size 350 x 350 mm) with reinforcement

cement concrete (1:1.5:3) with stone chips and using 100%
Sylhet sand FM-2.5 (Except reinforcement). 16882.00 12957.00

Each
3-95 Pile shoe made of 6 mm thick MS Plate connected with 3072.00 -
16mm dia M.S bar.

Rate in Taka

Exceeding Exceeding Exceeding

Upto 6 6 Metre 12 Metre 15 Metre
Per metre metre upto 12 upto 15 upto 18
Metre Metre Metre

3-96 Driving of (300 x 300mm) size pre-cast

pile with drop / Auto diesel hammer
type rig . 485.00 533.00 587.00 -

3-97 Driving of (350 x 350mm) size pre-cast

pile with drop / Auto diesel hammer 655.00 720.00 792.00 872.00
type rig .
Rate in Taka
3-98 Supply and driving wooden ballah minimum dia 100mm to
150 mm in palisading. 889.00

108
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
Different type of Chemicals/Admixtures Rate in Taka

Per litre
3-99 Supply and use of water reducing and retarding chemicals
such as foam-lub of Baral Chemical Co. Ltd. / Dr Fixit Or
equivalent as doses shown in the tables and manufacturers 532.00
instructions.

3-100 Supply and use of desalt-SOI (Anti-coat to salinity cum

sealer before painting) of Baral Chemical Co. Ltd / Dr
Fixit. Or equivalent as doses shown in the tables and
639.00
manufacturers instructions.

3-101 Supply and use of hydro seal Ef-32 for anti-salinity and
damp proof treatment of Baral Chemical Co. Ltd. Or
equivalent as doses shown in the tables and manufacturers 639.00
instructions.

3-102 Supply and use coal-tar for anti-salinity and damp proof
treatment of Baral Chemical Co. Ltd./ Dr Fixit Or
equivalent as doses shown in the tables and manufacturers 134.70
instructions.

3-103 Supply and use of Kerosene for anti-salinity and damp

proof treatment as doses shown in the tables and 100.00
instructions.

Per kg
3-104 Supply and use pesterthy (termite controlling powder)
before filling or PCC floor of Baral Chemical Co. Ltd./ Dr
Fixit Or equivalent as doses shown in the tables and
2,877.00
manufacturers instructions.

Rate in Taka

Per Cubic metre Materials & Labour Except Cement

109
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
3-105 Reinforced cement concrete (1:2:4)
using crushed stone graded as spd and
sand (50% Local sand F.M 1.5 + 50%
sylhet sand FM 2.5) as in pile (cast in
situ) excluding boring but casting 13,408.00 10,341.00
complete (Reinforcement measured
separately)

110
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
Rate in Taka

Sand FM Sand FM
Per Cubic metre 1.5 0.80
3-106 Sand filling under foundation after screening but without
washing including dressing, levelling, ramming etc.
complete as spd. 1111.00 657.00

Per Metre Width of Water stopper

150 mm 200 mm 250 mm
3-107 Supply and fixing of 6 mm thick PVC water
stopper in construction joint for RCC water
reservoir or in any position as spd. 259.00 328.00 369.00

Per Cubic metre Materials & Except

Labour Cement
3-108 Reinforced Cement Concrete (1:4:8) using bricks aggregate
Graded as specified as in column, beam and the like
including form work using local sand (reinforcement
7329.00 5846.00
measured separately)

Per Cubic metre Materials & Except

Labour Cement
3-109 Reinforced Cement Concrete (1:1.25:2.5) using crused
stone 19mm down graded in columns, beams, stairs and
landing, posts, struts, piers, lintels, walls and the like
including form work (Steel Reinforment measured separatly) 17273.00 12812.00
using 100% Sylhet sand of FM 2.5 (for ground floor only).

Materials & Except

Per Cubic metre Labour Cement
3-110 Reinforced Cement Concrete (1:1.25:2.5) using
crused stone 19mm down graded in Roof slab
including form work (Steel Reinforment
measured separatly) using 100% Sylhet sand of 17995.00 13534.00
FM 2.5 (for ground floor only).

111
RESTRICTED
 RESTRICTED
SECTION-3
CONCRETE RATES
Item Description
Rate in Taka

Per Sq. metre 1st Coat 2nd Coat

3-111 Applying of water barrier coating on top of roof
laying & finishing as specified etc complete as
per manufacturer Instruction of Berger/equivalent
202.00 167.00
brand.

Per Sq. metre 1st Coat 2nd Coat

3-112 Applying of roofing compound paint on top of roof
laying & finishing as specified etc complete as per
manufacturer instruction of Berger/Equivalent brand. 148.00 122.00

Materials & Except

Unit :Per Cu. metre Labour Cement
3-113 Add to Sch. Items No.3-109Chemical/Admixture
for RCC (1:1.25:2.5) in column, beam, roof slab
etc using Mega flow SP-402 of conmix Product
all as per instruction of manufacturer . (1.25kg 2815.00 0.00
Mega Flow mixed with 50 kg of cement )

Unit :Per Cu. metre Materials & Except

Labour Cement
3-114 Add to Sch. Item No.3-110 of cement
Chemical/Admixture for RCC (1:1.5:3) as in
foundation base using Mega-Add-WL-1 of
conmix Product and all as per instruction of 982.00 0.00
manufacturer. (.50 kg Mega-Add WL-1 mixed
with 50 kg of cement )

112
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
BURNT BRICK WORK Rate in Taka
Laid & jointed in Cement Mortar Mix
Per Cubic metre 1:3 1:4 1:6
Materials & Except Materials & Except Materials & Except
Labour Cement Labour Cement Labour Cement

4-1 Burnt brick work straight or

to curve with a radius of 6
metre and over.(Ground 6825.00 5651.00 6482.00 5608.00 6180.00 5592.00
floor)

4-2 Add for each additional

floor up to 5th floor 180.00

4-3 Add for each additional

floor from 6th to 9th 240.00

4-4 Add for each additional

floor from 10th to above 280.00

4-5 Burnt brick work built to

curve with a radius of less
than 6 Metre in wall etc. 7080.00 5761.00 6709.00 5727.00 6351.00 5694.00
(Ground floor)
4-6 Add for each additional
floor up to 5th floor 180.00

4-7 Add for each additional

floor from 6th to 9th 240.00

4-8 Add for each additional

floor from 10th to above 280.00

Cement Mortar Mix

1:3 1:4
Materials & Except Materials & Except
Labour Cement Labour Cement

4-9 Brick work with Ceramic bricks having 10

holes (240x120x70 mm) Ground floor 13063.00 11889.00 12730.00 11856.00

4-10 Add for each additional floor up to 5th floor 180.00

112
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description

4-11 Add for each additional floor from 6th to 9th 240.00

Add for each additional floor from 10th to

4-12 280.00
above

113
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
BURNT BRICK WORK Cement Mortar Mix

1:3 1:4
Per Cubic metre Materials & Except Materials & Except
Labour Cement Labour Cement

Ceramic Bricks work having 3 holes

4-13 8126.00 6952.00 7790.00 6916.00
size 240x162x113mm

4-14 Add for each additional floor up to 5th floor 180.00

4-15 Add for each additional floor from 6th to 9th 240.00

4-16 Add for each additional floor from 10th to 280.00

above
4-17 Cut and rubbed brick work in arches and
7131.00 5956.00 6803.00 5924.00
vaults etc. (Ground floor)

4-18 Add for each additional floor up to 5th floor 180.00

4-19 Add for each additional floor from 6th to 9th 240.00

Add for each additional floor from 10th to

4-20 280.00
above
Laid & Jointed in Cement Mortar Mix

HONEY COMB BRICK WORK 1:4 1:6

Per Cubic metre Materials & Except Materials & Except
Labour Cement Labour Cement

Brick work in honey comb walls. (Ground

4-21 4981.00 4663.00 4899.00 4661.00
floor)

4-22 Add for each additional floor up to 5th floor 180.00

4-23 Add for each additional floor from 6th to 9th 240.00

Add for each additional floor from 10th to

4-24 280.00
above
HOLLOW CLAY BLOCK BRICK WORK Laid & Jointed in Cement Mortar Mix
1:3 and pointing
Per Cubic metre Materials & Except Materials & Except
Labour Cement Labour Cement
4-25 Brick work with Hollow clay block set in CM
(1:3) laid & jointed with CM (1:2) incl. 8130.00 6960.00 - -
Pointing.

4-26 Add for each additional floor up to 5th floor 180.00

4-27 Add for each additional floor from 6th to 9th 240.00

114
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
4-28 Add for each additional floor from 10th to 280.00
above

115
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
Laid & Jointed in Cement Mortar Mix

FACING BRICK WORK 1:3 1:4

Per Square metre Materials & Except Materials & Except
Labour Cement Labour Cement

4-29 100 mm wide facing brick work with

machine made (Ceramic) brick including 2133.00 2014.00 2042.00 1953.00
pointing (size-200x100x50) ground floor
4-30 100 mm wide facing brick work with
machine made (Ceramic) brick including 2899.00 2772.00 - -
pointing (size-150x100x150) ground floor

4-31 Add for each additional floor up to 5th floor 32.00

4-32 Add for each additional floor from 6th to 9th 44.00

Add for each additional floor from 10th to

4-33 52.00
above
4-34 50 mm wide facing bricks work with
machine made (Ceramic) brick including 2611.00 2552.00 2594.00 2550.00
pointing (size-200x50x50) ground floor

4-35 Add for each additional floor up to 5th floor 32.00

4-36 Add for each additional floor from 6th to 9th 44.00

4-37 Add for each additional floor from 10th to 52.00

above
POINTING WORK
Per Square metre
4-38 Pointing struck flush or recessed to old or
225.00 217.00 222.90 217.00
new brick work built in any mortar. Ground
floor
4-39 Add for each additional floor up to 5th floor 16.00

4-40 Add for each additional floor from 6th to 9th 20.00

4-41 Add for each additional floor from 10th to above 28.00

4-42 Tuck pointing to -ditto- (Ground floor) 225.00 216.00 222.90 216.00

4-43 Add for each additional floor up to 5th floor 16.00

4-44 Add for each additional floor from 6th to 9th 20.00

4-45 Add for each additional floor from 10th to above 28.00

116
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
4-46 Raking out joints of old walls built in any mortar, including
86.20
preparing surfaces for re-pointing. (Ground floor)
4-47 Add for each additional floor up to 5th floor 16.00

4-48 Add for each additional floor from 6th to 9th 20.00

117
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
RAKING OUT WORK Rate in Taka
Per Square metre

4-49 Add for each additional floor from 10th to above 28.00
DAMP PROOF COURSE Cement Mortar Mix 1:3
Per Square metre Materials & Except
Labour Cement
4-50 Damp proof course of cm 1:3 mixed with pudlo or other
similar approved materials 2.5% by weight, 19 mm thick. 383.00 296.00

4-50A Damp proof course of cm 1:3 mixed with Foam lub of Baral
Chemical Co. ltd (BCCL) @ of .70% by weight, 19 mm thick. 242.00 155.00

Materials & Labour

4-51 Double layer polythene sheet under RCC work and floor as per
specification. (Weight of sheet 1 kg per 6 sq.m single layer) 43.10

1:1.5:3
Materials & Except
Labour Cement
4-52 38 mm thick PCC (1:1.5:3) using brick aggregate with one
coat of hot bitumen applied @ 0.24 kg/sq.m as spd. (Ground 475.00 342.00
floor)
4-53 Add for each additional floor up to 5th floor 32.00

4-54 Add for each additional floor from 6th to 9th 44.00

4-55 Add for each additional floor from 10th to above 52.00

Cement Mortar Mix

1:3 1:4
4-56 Add item No. 4-38 to 4-45 if Pudlo or other similar approved water
proofing materials is add to Cement 2.5% by weight 12.00 10.20

4-57 Add item No. 4-38 & 4-42 if Foam lub of Baral Chemical Co.
ltd.(BCCL) or other similar approved water proofing materials is 2.20 1.50
added to Cement .70% by weight
Rate in Taka
FACING BRICK WORK Materials & Labour
Colour
Per Square metre Klinker Black Pearl
Beige Appricot
Red Jet white
4-58 Facing brick (Mirpur Ceramic made) work
in wall laid and jointed in CM (1:2) incl.
Pointing all as specified measured flat 4897.00 5639.00 5374.00 5374.00 6753.00
(wall claddings CT-5, size 200x62x25
mm) ground floor

118
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
4-59 Add for each additional floor up to 5th 32.00
floor
4-60 Add for each additional floor from 6th 44.00
to 9th
4-61 Add for each additional floor from 10th 52.00
to above

119
RESTRICTED
 RESTRICTED
SECTION-4
BRICK WORK AND DPC RATES
Item Description
Per Square metre
Materials & Labour
4-62 Facing brick (ATI Ceramic) work in wall 3081.00
laid and jointed in CM (1:2) incl. Pointing
all as specified measured flat (wall
claddings, (size 228.6x63.5x12 mm) any
colour for ground floor
4-63 Add for each additional floor up to 5th 32.00
floor
4-64 Add for each additional floor from 6th 44.00
to 9th
4-65 Add for each additional floor from 10th 52.00
to above

FIRE BRICK WORK

Materials & Labour
Per Cubic metre
SK-34
For Other Court
4-66 Fire brick work with fire clay as in wall
or in any position as spd (Mirpur
59895.00 42879.00
ceramic products/Equivalent Co.).

Cement Mortar Mix

CERAMIC BRICK WORK

1:3 1:4
Materials
Per Cubic metre Except Materials Except
&
Cement & Labour Cement
Labour
Ceramic Bricks work having 3 holes size
7741.00 6566.00 7404.00 6530.00
4-67 240x162x100 mm.

Ceramic Bricks work having 3 holes

120x165x115 mm. 8157.00 6982.00 7820.00 6946.00
4-68

Ceramic Bricks having 3 holes re-

inforcing 240x115x70 mm. 14461.00 13286.00 14124.00 13250.00
4-69

120
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

TIMBERING TO EXCAVATION

Per Square metre Rate in Taka

5-1 Use and waste of timbering to excavation of any

description including wells, struts, open or close
pulling boards etc, may be provided and fixing and 216.00
removal (payment to be made for the area supported)

TIMBER WORK
Per Cubic metre
5-2 Timbering to excavation when timber is permanently
left in (Garjan) 97489.00

SHORING ETC
Per Cubic metre
5-3 Timber framing / boarding for shoring including
erection and removal (using Garjan) 19311.00

WOOD WORK
Per Cubic metre

5-4 Timber in scantling fixed complete (Chamble) 138448.00

5-5 - Ditto - Gamar Ctg. 109020.00

5-6 - Ditto - Silkorai Ctg. 135694.00

5-7 - Ditto - Kathal 150153.00

5-8 - Ditto - Jarul 123301.00

5-9 - Ditto - Telshu 132940.00

5-10 - Ditto - Jessore Teak 204546.00

5-11 - Ditto - Garjan 109020.00

5-12 - Ditto - Tit Chamble 177005.00

5-13 - Ditto - Ctg. Teak 254910.00

5-14 - Ditto - Shishum / Mehgoni 108153.00

122
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

WOOD WORK

Per Cubic metre Rate in Taka

5-15 Timber in scantling fixed complete but framed using
Chamble 142352.00

5-16 - Ditto -but using Gamar Ctg. 112924.00

5-17 - Ditto -but using Silkorai Ctg. 139598.00

5-18 - Ditto -but using Kathal 154057.00

5-19 - Ditto -but using Jarul 127205.00

5-20 - Ditto -but using Telshu 136844.00

5-21 - Ditto -but using Jessore Teak 208450.00

5-22 - Ditto -but using Garjan 112924.00

5-23 - Ditto -but using Tit Chamble 180910.00

5-24 - Ditto -but using Chittagong Teak 258815.00

5-25 - Ditto -but using Shishum / Mehgoni 112058.00

5-26 Timber in scantling fixed complete but wrought and
framed Using Chamble 143623.00

5-27 - Ditto -but using Gamar Ctg. 114195.00

5-28 - Ditto -but using Silkorai Ctg. 140868.00

5-29 - Ditto -but using Kathal 155327.00

5-30 - Ditto -but using Jarul 128475.00

5-31 - Ditto -but using Telshu 138114.00

5-32 - Ditto -but using Jessore Teak 209720.00

5-33 - Ditto -but using Garjan 114195.00

5-34 - Ditto -but using Tit Chamble 143623.00

123
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

5-35 - Ditto -but using Chittagong Teak 260085.00

5-36 - Ditto -but using Shishum / Mehgoni 113328.00

124
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

FILLET Rate in Taka

Per Metre Clean Sawn Wrought

5-37 Fillet n.exc 12.00 Sq. cm sectional area and fixed with
screws: using Chamble 142.00 153.00

5-38 - Ditto - Gamar Ctg. 112.00 122.80

5-39 - Ditto - Silkorai Ctg. 139.00 150.20

5-40 - Ditto - Kathal 154.00 165.10

5-41 - Ditto - Jarul 127.00 137.50

5-42 - Ditto - Tit Chamble 182.00 193.00

5-43 - Ditto - Garjan 111.00 121.50

5-44 - Ditto - Chittagong Teak 261.00 271.00

5-45 - Ditto - Jessore Teak 209.00 220.00

5-46 Fillet exc.12 sq.cm but n.exc. 25.00 sq. cm sectional

area: using Chamble 275.00 292.00

5-47 - Ditto - Gamar Ctg. 215.00 232.00

5-48 - Ditto - Silkorai Ctg. 270.00 286.00

5-49 - Ditto - Kathal 299.00 315.00

5-50 - Ditto - Jarul 244.00 261.00

5-51 - Ditto - Tit Chamble 354.00 370.00

5-52 - Ditto - Garjan 215.00 232.00

5-53 - Ditto - Chittagong Teak 512.00 528.00

125
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

5-54 - Ditto - Jessore Teak 410.00 426.00

126
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

BOARDING

Per square metre Rate in Taka

5-55 Boarding rebated grooved and tongued or beaded or chamfered one

or both sides and fixed complete with screws in any position and any
widths required in walls, floors ceiling etc 12.50 mm thick wrought
one side edges shot. (Chamble) 1670.00

5-56 - Ditto - Gamar Ctg. 1388.00

5-57 - Ditto - Silkorai Ctg. 1722.00

5-58 - Ditto - Kathal 1903.00

5-59 - Ditto - Jarul 1567.00

5-60 - Ditto - Tit Chamble 1873.00

5-61 - Ditto - Garjan 1328.00

5-62 - Ditto - Chittagong Teak 2298.00

5-63 - Ditto - Telshu 1274.00

5-64 - Ditto - Jessore Teak 1999.00

127
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

5-65 - Ditto - Shishum / Mehgoni 1286.00

128
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

BOARDING

Per square metre Rate in Taka

5-66 Boarding rebated grooved and tongued or beaded or chamfered one

or both sides and fixed complete with screws in any position and any
widths required in walls, floors ceiling etc 12.50 mm thick wrought
both side using Chamble 1690.00

5-67 - Ditto - Gamar Ctg. 1408.00

5-68 - Ditto - Silkorai Ctg. 1742.00

5-69 - Ditto - Kathal 1923.00

5-70 - Ditto - Jarul 1587.00

5-71 - Ditto - Tit Chamble 1893.00

5-72 - Ditto - Garjan 1365.00

5-73 - Ditto - Chittagong Teak 2318.00

5-74 - Ditto - Telshu 1300.00

5-75 - Ditto - Jessore Teak 2019.00

5-76 - Ditto - Shishum / Mehgoni 1306.00

129
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

BOARDING

Per square metre Rate in Taka

5-77 Boarding rebated grooved and tongued or beaded or chamfered one

or both sides and fixed complete with screws in any position and any
widths required in walls, floors, ceiling etc but 19 mm thick wrought
one side edges shot: using Chamble 2493.00

5-78 - Ditto - Gamar Ctg. 2066.00

5-79 - Ditto - Silkorai Ctg. 2573.00

5-80 - Ditto - Kathal 2851.00

5-81 - Ditto - Jarul 2340.00

5-82 - Ditto - Tit Chamble 2823.00

5-83 - Ditto - Garjan 1489.00

5-84 - Ditto - Chittagong Teak 3443.00

5-85 - Ditto - Telshu 1897.00

5-86 - Ditto - Jessore Teak 2992.00

5-87 - Ditto - Shishum / Mehgoni 1907.00

130
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

BOARDING

Per square metre Rate in Taka

5-88 Boarding rebated grooved and tongued or beaded or chamfered one

or both sides and fixed complete with screws in any position and any
widths required in walls, floors, ceiling etc but 25 mm thick wrought
one side edges shot: using Chamble 3212.00

5-89 - Ditto - Gamar Ctg. 2650.00

5-90 - Ditto - Silkorai Ctg. 3317.00

5-91 - Ditto - Kathal 3678.00

5-92 - Ditto - Jarul 3007.00

5-93 - Ditto - Tit Chamble 3643.00

5-94 - Ditto - Garjan 1892.00

5-95 - Ditto - Chittagong Teak 4463.00

5-96 - Ditto - Telshu 2428.00

5-97 - Ditto - Jessore Teak 3868.00

5-98 - Ditto - Shishum / Mehgoni 2433.00

131
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

BOARDING

Per square metre Rate in Taka

5-99 Boarding rebated grooved and tongued or beaded or chamfered one

or both sides and fixed complete with screws in any position and any
widths required in walls, floors, ceiling etc but 19 mm thick wrought
both side edges shot: using Chamble 2662.00

5-100 - Ditto - Gamar Ctg. 2102.00

5-101 - Ditto - Silkorai Ctg. 2610.00

5-102 - Ditto - Kathal 2885.00

5-103 - Ditto - Jarul 2374.00

5-104 - Ditto - Tit Chamble 3396.00

5-105 - Ditto - Garjan 2102.00

5-106 - Ditto - Chittagong Teak 4877.00

5-107 - Ditto - Telshu 1938.00

5-108 - Ditto - Jessore Teak 3919.00

132
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

5-109 - Ditto - Shishum / Mehgoni 2086.00

133
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

BOARDING

Per square metre Rate in Taka

5-110 Boarding rebated grooved and tongued or beaded or chamfered both
sides and fixed complete with screws in any position and any widths
required in walls, floors, ceiling etc but 25 mm thick wrought both 3246.00
side edges shot: (Chamble)

5-111 - Ditto - Gamar Ctg. 2684.00

5-112 - Ditto - Silkorai Ctg. 3351.00

5-113 - Ditto - Kathal 3712.00

5-114 - Ditto - Jarul 3041.00

5-115 - Ditto - Tit Chamble 3677.00

5-116 - Ditto - Garjan 1926.00

5-117 - Ditto - Chittagong Teak 4497.00

5-118 - Ditto - Telshu 2462.00

5-119 - Ditto - Jessore Teak 3902.00

5-120 - Ditto - Shishum / Mehgoni 2475.00

JOBBING OLD ROOF TRUSSES Rate in Taka
Hoisting &
Taking down old
Each truss
Fixing old
truss

5-121 Timber trusses up to 7.50 metre span 599.00 814.00

5-122 - Ditto -exceeding 7.50 metre but not exceeding 10.50

metre span 1048.00 1197.00

TRELLIS WORKS
Per square metre Rate in Taka
5-123 38x10 mm wood of specified kind wrought trellis
work, two way square of diagonal at 50 mm spaces and
75x25 mm fillet framing all round fixed complete. 1993.00
(Chamble)

5-124 - Ditto - Gamar Ctg. 1540.00

134
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

5-125 - Ditto - Silkorai. Ctg. 1951.00

5-126 - Ditto - Garjan 1358.00

135
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

Moulding & Turned work Normal Size in mm

Per Metre 50x50 75x50 100x75

5-127 Mouldings and turned wood work for
stair rails including and similar work
with cost of timber. (Chamble) 397.00 914.00 1487.00

5-128 - Ditto - Gamar Ctg. 315.00 752.00 1212.00

5-129 - Ditto - Silkorai Ctg. 389.00 899.00 1462.00

5-130 - Ditto - Tit Chamble. 504.00 1046.00 1875.00

5-131 - Ditto - Chittagong Teak 722.00 1437.00 2617.00

5-132 - Ditto - Jessore Teak 581.00 1184.00 2137.00

SMALL ARTICLES Rate in Taka
Each
5-133 Specified kind of wood small fittings, wrought, splayed, chamfered
shaped rounded etc such as brackets, small shelves, latch, hinges,
switch & bell push, blocks, door and window stops etc articles n.exc 45.50
250 cubic cm. (Chamble)

5-134 - Ditto - Gamar Ctg. 38.20

5-135 - Ditto - Silkorai. Ctg. 45.00

5-136 - Ditto - Kathal. 48.00

5-137 - Ditto - Garjan 38.00

5-138 - Ditto - Chittagong Teak 75.00

5-139 - Ditto - Shishum / Mehgoni 38.00

5-140 - Ditto - but exceeding 250 cu. centimetre but not exceeding 500 cu.
cm (Chamble) 84.10

5-141 - Ditto - Gamar Ctg. 69.00

5-142 - Ditto - Silkorai Ctg 83.00

5-143 - Ditto - Kathal. 90.00

5-144 - Ditto - Garjan 69.00

136
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

5-145 - Ditto - Chittagong Teak 142.00

5-146 - Ditto - Shishum / Mehgoni 69.00

137
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description
Rate in Taka
BALLIES Mean Diameter in mm
Exc. 100 but
Per Metre Exc. 75 but n.exc 100mm n.exc
150mm
5-147 Ballies supplied and fixed with other
member except pilling. 439.00 677.00

5-148 - Ditto -but supplied and fixed

424.00 656.00
independently except pilling
Exc. 5.00m
Exc. 3.65m but n.exc 5.00m depth but n.exc
Per Metre 7.50m depth
5-149 Ballies supplied & fixed exc 100mm
dia but n. exc. 150mm dia as wooden
pile up to the spd. depth including 881.00 946.00
driving
WORKMANSHIP, PLUGGING ETC.
Including following items ::
a) Apply to work with or across grain
b) Apply to wood of any description
c) Include meters, stops, chamfers, returns etc.
Per Metre Rate in Taka
5-150 Labour only for beads, chamfers, splays, rebates, rounded angles,
tongue, grooves rounded nosing, staff boards, flutes each exc 6.25
mm but n. exc 75 mm width or girth mouldings & turned works not 14.40
exc 75 mm girth where not otherwise provided rate per 25 mm or part
thereof.

Rate in Taka
Per Metre Silkorai Garjan Ctg. Teak
5-151 Plug wall for single boards etc not
exceeding 200 mm wide with single
row of plugs at distances n.exc 1.00
metre (any walls in any mortar or 21.30 19.50 28.40
concrete walls) wood of specified kind.

5-152 Plug wall for boarding exc. 200 mm

wide with double row of plugs at
distances n.exc 1.00 metre (any walls in 42.60 39.10 56.80
any mortar or concrete walls) wood of
specified kind.

5-153 All as last item but detached work etc. 19.50 17.90 25.90
Rate in Taka

138
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description
5-154 Extra for work in rifle racks i.e cutting & dishing for buttes, notching
for stocks & cutting for ends of barrel. 141.50

139
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

JOBBING WORK Rate in Taka

Taking up or
Taking up or down
Per square metre Re-securing
& refixing
down & remove
to store

5-155 Wire Gauze (Fly and Mosquito netting)

with fillets and or framing (any kind of 21.40 64.20 69.00
wood)
5-156 Shelves, including brackets fillets, etc
& window boards with bearers etc (any
0.00 64.20 34.50
kind of wood)

5-157 Skirting wood, any width including

grounds if required (any kind of wood) 0.00 164.10 47.50

5-158 Boarding or flooring 0.00 200.10 -

5-159 - Ditto -but in patches in repairs to
existing floors including cutting out 0.00 294.00 -
joints etc.

Per Metre

5-160 Casing (Box) to pipes any girth 21.80 43.40 3.90

5-161 Fillets, moulding quadrant skirting
hand rails, peg rails etc. 8.30 23.30 13.80

Per Cubic Metre Rate in Taka

5-162 Timber in scantling in any position taking up or down
and refixing (any timber). 1,977.00

BOARDING
Per Square Metre
5-163 Boarding rebated grooved & tongued or beaded or
chamfered one or both sides and fixed complete with
screws in any position and any width required in walls,
4,707.00
floors, ceiling etc 38mm thick wrought one side edges
shot (Chamble)

5-164 - Ditto - Gamar (Ctg.) 2,903.00

5-165 - Ditto - Garjan 2,709.00

5-166 - Ditto - Silkoari (Ctg.) 3,571.00

140
RESTRICTED
 RESTRICTED
SECTION-5
WOOD WORKS RATES
Item Description

BOARDING

Per Square Metre

Rate in Taka

5-167 - Ditto - Jessore Teak 3,316.00

5-168 - Ditto - Tit Chamble 5,373.00

5-169 - Ditto - Chittagong Teak 6,614.00

5-170 - Ditto - Kathal 5,596.00

5-171 - Ditto - Jarul 3,359.00

5-172 - Ditto - Shishum / Mehgoni 3,541.00

PALASADING Rate in Taka

Per Square Metre Materials & Add if fixed
Fixing only
Labour in repair

5-173 Bituminous drum sheet fixed with

palasadings as spd (Framing to be paid
separately). 718.00 98.20 24.50

141
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
CHOWKATS

Per cu.m Rate in Taka

6-1 Chowkat for windows glazed or gauzed including
holdfast fixed in position as specified (Chamble) 180137.00

6-2 - Ditto - but (Silkorai ctg) 177108.00

6-3 - Ditto - but (Jarul) 163475.00

6-4 - Ditto - but (Kathal) 193013.00

6-5 - Ditto - but (Telsu) 174079.00

6-6 - Ditto - but (Jessore Teak) 252845.00

6-7 - Ditto - but (Garjan) 147767.00

6-8 - Ditto - but (Tit Chamble) 222551.00

6-9 - Ditto - but (Chittagong Teak) 308247.00

6-10 - Ditto - but (Shishum / Mehgoni) 146813.00

6-11 Chowkat for CSWs glazed or gauzed including holdfast

and fixed in position as specified (Chamble) 195781.00

6-12 - Ditto - but (Silkorai ctg) 192751.00

6-13 - Ditto - but (Jarul) 179119.00

6-14 - Ditto - but (Kathal) 208656.00

6-15 - Ditto - but (Telsu) 189722.00

6-16 - Ditto - but (Jessore Teak) 268488.00

6-17 - Ditto - but (Garjan) 163410.00

6-18 - Ditto - but (Tit Chamble) 238193.00

6-19 - Ditto - but (Chittagong Teak) 323890.00

146
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

6-20 - Ditto - but (Shishum / Mehgoni) 162456.00

147
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

CHOWKATS

Per cu.m Rate in Taka

6-21 Chowkat for doors gates including holdfast and fixed in
position as specified (Chamble) 183486.00

6-22 - Ditto - but (Silkorai ctg) 180461.00

6-23 - Ditto - but (Jarul) 166851.00

6-24 - Ditto - but (Kathal) 196340.00

6-25 - Ditto - but (Gamar ctg) 151168.00

6-26 - Ditto - but (Telsu) 150216.00

6-27 - Ditto - but (Jessore Teak) 256074.00

6-28 - Ditto - but (Garjan) 151168.00

6-29 - Ditto - but (Tit Chamble) 225829.00

6-30 - Ditto - but (Chittagong Teak) 311384.00

6-31 - Ditto - but (Shishum / Mehgoni) 150216.00

Rate in Taka
WINDOWS SHUTTERS Thickness in millimetre

Per sq.m 32.00 38.00

6-32 Wrought sashes, glazed shutter with moulded or
chamfered bars, panels filled in with glass fixed as
specified including hanging complete except mongeries
4578.00 5009.00
which will be paid separately (Chamble)

6-33 - Ditto - but (Gamar ctg) 4031.00 4361.00

6-34 - Ditto - but (Silkorai ctg) 4527.00 4948.00

6-35 - Ditto - but (Jarul) 4296.00 4675.00

148
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

6-36 - Ditto - but (Kathal) 4796.00 5266.00

6-37 - Ditto - but gauzed shutter (Chamble) 4903.00 5372.00

149
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka

WINDOWS SHUTTERS Thickness in millimetre

Per sq.m 32.00 38.00

6-38 - Ditto - but (Gamar ctg) 4388.00 4748.00

6-39 - Ditto - but (Silkorai ctg) 4855.00 5313.00

6-40 - Ditto - but (Jarul) 4638.00 5051.00

6-41 - Ditto - but (Kathal) 5108.00 5620.00

6-42 - Ditto - but glazed shutter (Ctg. Teak) 6744.00 7644.00

6-43 - Ditto - but gauzed shutter (Ctg. Teak) 6941.00 7841.00

6-44 - Ditto - but glazed shutter (Jessore Teak) 5807.00 6521.00

6-45 - Ditto - but gauzed shutter (Jessore Teak) 5963.00 6735.00

6-46 - Ditto - but glazed shutter (Tit Chamble) 5196.00 5857.00

6-47 - Ditto - but gauzed shutter (Tit Chamble) 5495.00 6156.00

6-48 - Ditto - but glazed shutter (Shishum / Mehgoni) 3957.00 4342.00

6-49 - Ditto - but gauzed shutter (Shishum / Mehgoni) 4325.00 4710.00

DOOR SHUTTERS

Per sq. m
6-50 Wrought sashes, glazed shutter with moulded or
chamfered bars, panels filled in with glass fixed as
specified including hanging complete except mongeries 4747.00 5273.00
which will be paid separately (Chamble)

6-51 - Ditto - but (Gamar ctg) 4242.00 4647.00

6-52 - Ditto - but (Silkorai ctg) 4700.00 5215.00

150
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

6-53 - Ditto - but (Jarul) 4487.00 4951.00

6-54 - Ditto - but (Kathal) 4948.00 5523.00

151
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka

DOOR SHUTTERS Thickness in millimetre

Per sq. m 32.00 38.00

6-55 - Ditto - but gauzed shutter (Chamble) 4625.00 5020.00

6-56 - Ditto - but (Gamar ctg) 4151.00 4454.00

6-57 - Ditto - but (Silkorai ctg) 4581.00 4967.00

6-58 - Ditto - but (Jarul) 4381.00 4729.00

6-59 - Ditto - but (Kathal) 4814.00 5245.00

6-60 - Ditto - but glazed shutter (Ctg. Teak) 6743.00 7754.00

6-61 - Ditto - but gauzed shutter (Ctg. Teak) 6501.00 7258.00

6-62 - Ditto - but glazed shutter (Jessore Teak) 5880.00 6681.00

6-63 - Ditto - but gauzed shutter (Jessore Teak) 5690.00 6290.00

6-64 - Ditto - but glazed shutter (Tit Chamble) 5408.00 6095.00

6-65 - Ditto - but gauzed shutter (Tit Chamble) 5246.00 5761.00

6-66 - Ditto - but glazed shutter (Shishum / Mehgoni) 4228.00 4628.00

6-67 - Ditto - but gauzed shutter (Shishum / Mehgoni) 4137.00 4438.00

Rate in Taka
CSW SHUTTERS Thickness in millimetre
Per sq.m 32.00 38.00
6-68 Glazed shutter for CSWs all as above but including
hanging complete but excluding mongeries which will
be paid separately (Chamble) 5736.00 6661.00

6-69 - Ditto - but (Gamar ctg) 5170.00 5606.00

6-70 - Ditto - but (Silkorai ctg) 5683.00 6237.00

152
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka
CSW SHUTTERS Thickness in millimetre
Per sq.m 32.00 38.00

6-71 - Ditto - but (Jarul) 5445.00 5944.00

6-72 - Ditto - but (Kathal) 5961.00 6580.00

6-73 - Ditto - but gauzed shutter (Chamble) 5619.00 6185.00

6-74 - Ditto - but (Gamar ctg) 5053.00 5488.00

6-75 - Ditto - but (Silkorai ctg) 5566.00 6120.00

6-76 - Ditto - but (Jarul) 5328.00 5827.00

6-77 - Ditto - but (Kathal) 5843.00 6463.00

6-78 - Ditto - but glazed shutter (Ctg. Teak) 7973.00 9421.00

6-79 - Ditto - but gauzed shutter (Ctg. Teak) 7856.00 8944.00

6-80 - Ditto - but glazed shutter (Jessore Teak) 7005.00 7867.00

6-81 - Ditto - but gauzed shutter (Jessore Teak) 6888.00 7751.00

6-82 - Ditto - but glazed shutter (Tit Chamble) 6476.00 7215.00

6-83 - Ditto - but gauzed shutter (Tit Chamble) 6359.00 7099.00

6-84 - Ditto - but glazed shutter (Shishum / Mehgoni) 5152.00 5583.00

6-85 - Ditto - but gauzed shutter (Shishum / Mehgoni) 5037.00 5468.00

153
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka

WINDOWS SHUTTER Thickness in millimetre

Per sq.m 32.00 38.00

6-86 Fixed Venetian shutter for Window with 10 CM wide
rails and styles including hanging complete but except
7367.00 7986.00
mongeries which will be paid separately (Chamble)

6-87 - Ditto - but (Gamar ctg) 6448.00 6922.00

6-88 - Ditto - but (Silkorai ctg) 7281.00 7886.00

6-89 - Ditto - but (Jarul) 6894.00 7438.00

6-90 - Ditto - but (Kathal) 7733.00 8409.00

6-91 - Ditto - but (Jessore Teak) 9433.00 10374.00

6-92 - Ditto - but (Ctg. Teak) 11007.00 12194.00

6-93 - Ditto - but (Tit Chamble) 8572.00 9379.00

DOOR SHUTTERS

Per sq.m
6-94 Framed and Panelled door shutter including hanging but
excluding mongeries which will be paid separately
6453.00 7071.00
(Chamble)

6-95 - Ditto - but (Gamar ctg) 5556.00 6030.00

6-96 - Ditto - but (Silkorai ctg) 6369.00 6974.00

6-97 - Ditto - but (Jarul) 5991.00 6535.00

6-98 - Ditto - but (Kathal) 6810.00 7485.00

6-99 - Ditto - but (Jessore Teak) 8468.00 9409.00

6-100 - Ditto - but (Ctg. Teak) 10004.00 11190.00

6-101 - Ditto - but (Tit Chamble) 7628.00 8435.00

154
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka
DOOR SHUTTERS Thickness in millimetre

Per sq.m 32 mm 38 mm
6-102 Framed and Panelled partition and dados made of
(Chamble) 5557.00 5898.00

6-103 - Ditto - but (Gamar ctg) 4544.00 4806.00

6-104 - Ditto - but (Silkorai ctg) 5462.00 5796.00

6-105 - Ditto - but (Jarul) 5036.00 5336.00

6-106 - Ditto - but (Kathal) 5960.00 6333.00

6-107 - Ditto - but (Jessore Teak) 9566.00 10221.00

6-108 - Ditto - but (Ctg. Teak) 9566.00 10221.00

6-109 - Ditto - but (Tit Chamble) 6884.00 7329.00

Thickness in millimetre
Per sq.m 19 mm 25 mm
6-110 Ledged and battened door shutter with rebated joints
including hanging complete but except mongeries which
will be paid separately (Chamble) 4572.00 5364.00

6-111 - Ditto - but (Gamar ctg) 3845.00 4445.00

6-112 - Ditto - but (Silkorai ctg) 4504.00 5269.00

6-113 - Ditto - but (Jarul) 4198.00 4886.00

6-114 - Ditto - but (Kathal) 4861.00 5716.00

6-115 - Ditto - but (Jessore Teak) 6205.00 7405.00

6-116 - Ditto - but (Ctg. Teak) 7449.00 8960.00

6-117 - Ditto - but (Garjan) 3845.00 4455.00

6-118 - Ditto - but (Tit Chamble) 5524.00 6555.00

155
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

Rate in Taka

DOOR SHUTTERS Thickness in millimetre

Per sq.m 19 mm 25 mm
6-119 Ledged, battened and braced door shutter with rebated
side joints including hanging complete but except
mongeries which will be paid separately (Chamble) 5124.00 6381.00

6-120 - Ditto - but (Gamar ctg) 4270.00 5231.00

6-121 - Ditto - but (Silkorai ctg) 5044.00 6269.00

6-122 - Ditto - but (Jarul) 4684.00 5787.00

6-123 - Ditto - but (Kathal) 7043.00 8948.00

6-124 - Ditto - but (Jessore Teak) 7043.00 8953.00

6-125 - Ditto - but (Ctg. Teak) 8505.00 10913.00

6-126 - Ditto - but (Tit Chamble) 6243.00 7881.00

Rate in Taka
DOOR SHUTTERS Thickness in millimetre

Per sq.m 38.00 50.00

6-127 Framed and braced door filled with tongued grooved
and beaded (or chamfered both side) battens including
hanging complete but except mongeries which will be 6411.00 8038.00
paid separately (Chamble)

6-128 - Ditto - but (Gamar ctg) 5406.00 6652.00

6-129 - Ditto - but (Silkorai ctg) 6317.00 7904.00

6-130 - Ditto - but (Jarul) 5894.00 7322.00

6-131 - Ditto - but (Kathal) 6811.00 8583.00

6-132 - Ditto - but (Jessore Teak) 8673.00 11146.00

6-133 - Ditto - but (Ctg. Teak) 10393.00 13511.00

156
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

6-134 - Ditto - but (Tit Chamble) 7733.00 9853.00

157
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka
FLUSH DOOR Name Manufacturer

Per sq.m Star Particles BFIDC

6-135 Supply and fixing of Flush door 36 mm thick both side
veneered commercial (Garjan) excluding mongeries 3593.00 3089.00

6-136 - Ditto - but Chapalish 3815.00 -

6-137 - Ditto - but Tit Chamble / Champa 3815.00 3815.00

6-138 - Ditto - but Burma Teak 4839.00 -

Rate in Taka
SOLID DOOR Thickness in millimetre
Per sq.m 25.00 32.00 38.00
6-139 Solid door shutter including hanging but
7362.00 8477.00 9425.00
excluding mongeries (Chamble)

6-140 - Ditto - but (Gamar ctg) 6440.00 7296.00 8024.00

6-141 - Ditto - but (Silkorai ctg) 7275.00 8366.00 9294.00

6-142 - Ditto - but (Jarul) 6887.00 7869.00 8704.00

6-143 - Ditto - but (Kathal) 7728.00 8947.00 9982.00

6-144 - Ditto - but (Ctg. Teak) 11009.00 13150.00 14970.00

6-145 - Ditto - but (Jessore Teak) 9432.00 11129.00 12572.00

6-146 - Ditto - but (Tit Chamble) 8569.00 10024.00 11261.00

6-147 - Ditto - but (Shishum / Mehgoni) 7189.00 7261.00 7983.00

Rate in Taka
6-148 38 mm thick solid door shutter made of ctg. teak designed with raised
batten including hanging but excluding mongeries 12674.00

6-149 Supply and fixing of wooden louver shutter 30 mm thick for cat door
made of Ctg. Teak wood all as per drawing. 18005.00

6-149A Supply and fixing of 38 mm and 25 mm thick composite panel and

framed door shutter made with ctg Teak wood with raised design batten as 14773.00
spd except mongeries
PLY WOOD Thickness in millimetre
Per sq.m 3.00 6.00 12.00
6-150 Ply wood fixed to timber framing (Timber to
be paid separately) 662.00 925.00 1179.00
158
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-151 - Ditto - fixing only 16541.00 16541.00 235.00

6-152 - Ditto - but add if fixed in repair 292.00 292.00 294.00

159
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

CUP BOARD / CABINET Rate in Taka

Per sq.m
6-153 Supply and fixing of Cup board 625 mm depth any colour made of both
side melamine coated / laminated board 19mm thick including 2xdrawer,
shelf, 3mm thick plastic board liner, steel channel for drawer, steel lama
hinges, steel handle, steel lock, etc. complete (OTOBI / NAVANA / 7788.00
PARTEX BRAND) as spd.

6-153A Supply and fixing of Cabinet Bed room, 625 mm depth any colour made
of both side melamine coated / laminated board 19mm thick, 25mm top
and bottom, including 2xdrawer, lock, handle, hinges, tower bolt, roller,
shelf, 3mm thick MDF board back, steel channel for drawer, etc. 8282.00
complete (OTOBI / NAVANA / PARTEX BRAND) as spd.

6-154 Supply and fixing of Cup board / Cabinet Dress, 625 mm depth any
colour made of both side melamine coated / laminated board 19mm thick
including 2xdrawer, shelf, 3mm thick plastic board liner, steel channel for
drawer, steel lama hinges, steel handle, steel lock, mirror (size 12621.00
600x1200mm) etc. complete (OTOBI / NAVANA / PARTEX BRAND)
as spd.

6-155 Supply and fixing of Cabinet Kitchen, 375 mm depth any colour made of
both side melamine coated / laminated board 19mm thick including
2xdrawer, shelf, 3mm thick plastic board liner, steel channel for drawer,
steel lama hinges, steel handle, steel lock, etc. complete (OTOBI / 10100.00
NAVANA / PARTEX BRAND) as spd.

6-156 Supply and fixing of Cup board / Cabinet JCO's / OR's type, 500 mm
depth any colour made of both side melamine coated / laminated board
19mm thick including 2xdrawer, shelf, 3mm thick plastic board liner,
steel channel for drawer, steel lama hinges, steel handle, steel lock, etc. 7096.00
complete (OTOBI / NAVANA / PARTEX BRAND) as spd.

160
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka
Doors Windows
MONGERIES FOR DOORS,
CSWs
WINDOWS & CSWS Double Single
Double leaf Single leaf
leaf leaf

Each
6-157 Iron mongeries for doors,
windows and CSWs as 421.00 238.00 279.00 159.00 476.00
spd
6-158 Brass mongeries for
doors, windows and 2465.00 1387.00 1440.00 808.00 478.00
CSWs as specified.
Supplied & Add if fixed in
WIRE GAUZE Except wire gauze
fixed repair
Per sq.m
6-159 Iron tinned fly proof 4x4 mesh per CM , 24
gauze complete with screw (Timber to be 667.00 268.00 45.00
paid under relevant item)
6-160 - Ditto - but using 7x7 mesh per cm - Ditto - 5101.00 268.00 45.00

6-161 Iron tinned mosquito proof 7x7 mesh per

CM 28 gauze complete with screw (timber to 784.00 268.00 45.00
be paid under relevant item)

6-161A Iron tinned mosquito proof 7x7 mesh per

CM 32 gauze complete with screw (timber to
be paid under relevant item) 5073.00 268.00 45.00

6-162 Plastic wire gauze mosquito proof 7x7 mesh

/ CM complete with screw (Timber to be
paid under relevant item) 649.00 270.00 45.10

Rate in Taka
JOBBING WORK Taking down & refixing
Resecurin
g without Removing to or
taking Same Other Taking down from store
Each down Opening Opening only

6-163 Window chowkats

including board if any 92.00 329.00 435.00 132.00 102.00

6-164 Window chowkats

including sashes 109.00 439.00 659.00 132.00 100.00

161
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

Rate in Taka

JOBBING WORK Taking down & refixing

Resecurin
g without Removing to or
taking from store
Same Other Taking down
Each down
Opening Opening only

6-165 Casement windows fan

lights etc (sashes only) 43.00 88.00 165.00 55.00 75.00

6-166 Door chowkat wooden /

steel door complete (n.
exc 2.6 sq.m each) 88.00 329.00 439.00 132.00 75.00
including architraves if
any.

6-167 Door chowkat wooden /

steel door complete (exc
2.6 sq.m each) including
120.00 439.00 659.00 132.00 85.00
architraves if any.

6-168 Door gate leaves only

(single or folding) of any
pattern or thickness not 55.00 88.00 165.00 46.00 75.00
exc 2.60 sq.m each.

6-169 Partitions framing cup-

board fronts wall paneling
& similar wood work
90.00 277.00 354.00 168.00 129.00
including door exc 2.60
sq.m each

Rate in Taka

Per sq.m
6-170 Door or gates of any description cramped up, rewedged with new wedged
in glue (or white lead repined if in ext. works) not exceeding 2.60 sq.m
each incl. taking down & rehanging and taking off and refixing hinges
9.00
(any description) & removing to & from workshop.

6-171 - Ditto - but exc 2.60 sq.m - ditto - 12.00

162
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

JOBBING WORK Rate in Taka

Per sq.m

6-172 - Ditto - but not exceeding 2.60 sq.m. and including in addition taking as
under for the renewal of defective parts also preparing to receive the same. 168.00

6-173 - Ditto - but exc 2.60 sq.m supper and -ditto- 232.00
Supply and fixing of steel louver fram made of 14 BG plain sheet
6-173A including cutting, welding and red oxide priming coat of paint complete as 15326.00
spd.
Taking down &
refixing
Taking down Remove to or
Same Other only from store
Each
opening opening
6-174 Steel glazed window / CSW
complete 659.00 988.00 165.00 78.00

6-175 Steel gauzed window/ CSW

complete 329.00 439.00 132.00 75.00

6-176 Steel window grill 329.00 439.00 132.00 75.00

Per Metre Rate in Taka

6-177 Supply & fixing 19mm dia brass tube curtain poles, fixed with suitable
soft wood brackets but without curtain rings. 1542.00

STEEL GLAZED WINDOW

Per sq.m
6-178 Steel window/CSW glazed with 3 mm glass outer and inner frame "Z"
bars 19x19x3mm size and "T" section 19x19x3mm for horizontal &
vertical division as per drawing including fabrication welding all fitting
holdfast embedded in PCC blocks & painting with anticorrosive priming 4478.00
coat, fixed complete in position (area n.exc 1.50 sq.m each)

6-179 - Ditto - but exc 1.5 sq.m -ditto- 3974.00

163
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka
STEEL GAUZED
Supply & fixing
WINDOW

7x7 mesh / 7x7 mesh / cm 4x4 mesh / cm

Per sq.m cm 32 gauze 28 gauze 24 gauze

6-180 Steel gauzed windows/CSW panels filled

with wire net outer and inner frame with "Z"
bars19x19x3 mm size and "T" section
19x19x3 mm for horizontal and vertical
division as per drawing incl fabrication
welding all fitting holdfast embedded in 9284.00 4967.00 5366.00
PCC block & painting with anticorrosive
priming coat, fixed complete in position
(area n.exc 1.50 sq.m each)

6-181 - Ditto - but exc 1.5 sq.m -ditto- 8750.00 4433.00 4035.00
6-182 Steel fixed windows/CSW panels filled with
wire net, outer and vertical division with "Z"
bars19x19x3 mm size horizontal division
with 19x3 mm FI bar gauzed wire net fixed
to frame with 12x3mm FI cover fillets as per
drawing incl fabrication welding holdfast 7777.00 3461.00 3062.00
embedded in PCC blocks and painting with
anticorrosive priming coat, fixed complete in
position (area n.exc 1.50 sq.m each)

6-183 - Ditto - but exc 1.5 sq.m -ditto- 6833.00 2517.00 2118.00

Per sq.m Rate in Taka

6-184 Steel window half glazed with 3mm sheet glass fixed with putty & half
panelled with 20 BG M S sheet outer & inner frames with "Z" bars
19x19x3mm size "T" section 19x19x3mm for horizontal & vertical
division as per drawing incl. fabrication welding all fittings holdfast
4284.00
embedded in PCC blocks & painting with anticorrosive priming coat fixed
complete in position (area exc 1.50 sq.m each)

6-185 - Ditto - but n. exc 1.5 sq.m 4972.00

164
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
STEEL GAUZED WINDOW

Per sq.m Rate in Taka

6-186 Steel pivoted glazed window, outer frame & vertical uprights made of "Z"
bars 19x19x3mm size & shutter made of angle iron 19x19x3mm size,
horizontal division made of 19x19x3mm "T" section and filled with 3 mm
thick sheet of glass fixed with putty all as per drawing incl. fabrication
welding all fittings (GI eye hook fastener handle) holdfast embedded in
3968.00
PCC blocks & painting with anticorrosive priming coat fixed complete in
position

Supply & fixing

7x7 mesh / 7x7 mesh / cm 4x4 mesh / cm

cm 32 gauze 28 gauze 24 gauze
Per sq.m
6-187 Wire gauge fixed netting in verandah having
outer frame with 19x19x3mm angle &
vertical division with 19mmx3mm MS FI
bar wire gauge fixed to frame with 19mm
x3mm FI cover fillets screwed all as per
drawing incl. fabrication welding all fixing 1899.00 1899.00 1500.00
holdfast embedded in PCC blocks &
painting with anticorrosive priming coat
fixed complete in position

Per sq.m Rate in Taka

6-188 Supply and fixing of aluminium wire mosquito proof net
for Verandah grill or any other place fixed with iron
angle outer frame 19x19x3mm and cover fillets division 2132.00
with 19x3mm MS flat bar incl welding, granding, screw,
holdfast joint bolt, nut & bolts, painting with red oxide
paint etc complete as spd. Supply & fixing
Fixed Venetian
6-189 Steel glazed window for stair case made of 25x25x3mm
angle iron outer frame, internal panels made of
19x19x3mm angle iron, fixed panels/venetain panels
filled with 3mm thick sheet of glass fixed with putty all
as per drawing including fabrication welding holdfast 3856.00 5572.00
embedded in PCC blocks & painting with anticorrosive
priming coat fixed complete in position

165
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Rate in Taka
2
6-190 Steel grill for railing of stair with 12x12 mm solid bar 38.1 x 4.76 mm FI
bar including welding and fixed complete in position
3089.00

166
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
GRILL
Per sq.m
Rate in Taka
6-191 Steel window design grill made of 19x5mm FI bar as per specification
including welding holdfast etc, embedded in PCC blocks & painting with
anticorrosive priming coat fixed complete in position (any design as 1999.00
approved.)

6-192 Steel window design grill made of 25x5mm FI bar as per specification
including welding holdfast etc, embedded in PCC blocks & painting with
anticorrosive priming coat fixed complete in position (any design as 2488.00
approved.)

6-193 Steel window design grill made of 19x3mm FI bar as per design &
specification including welding all fitting holdfast etc, embedded in PCC
blocks & painting with anticorrosive priming coat fixed complete in 1663.00
position (any size in approved.)

6-194 Steel window design grill made of 19x6mm FI bar outer frame &
19x5mm FI bar inner members as per design & specification incl. welding
all fitting holdfast embedded in PCC blocks & painting with anticorrosive
2071.00
priming coat fixed complete in position (any design as approved.)

6-195 Steel window design grill made of 25x3mm FI bar as per specification
incl. welding holdfast embedded in PCC blocks & painting with
anticorrosive priming coat (any design as approved.) 1983.00

6-195A Design steel window grill made with 18 BG 25x25 mm and 19x19 mm
MS square box, 12x12 mm MS solide square bar, 19x5 mm FI bar
including cutting, welding, grinding and one coat anticorrisive paint 2885.00
complete as required size and specification.

6-195B Design steel window grill made with 18 BG 25x25 mm MS square box
and 12x12 mm MS solide square bar, 19x5 mm FI bar including cutting,
welding, grinding and one coat anticorrisive paint complete as required 2405.00
size and specification.
6-195C Design steel window grill made with 18 BG 19x19 mm MS square box,
12x12 mm MS solide square bar, 19x5 mm FI bar including cutting,
welding, grinding and one coat anticorrisive paint complete as required 2383.00
size and specification area exc 1.50 sq.m.

167
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-195D Design steel window grill made with 18 BG 19x19 mm MS square box,
12x12 mm MS solide square bar including cutting, welding, grinding and
one coat anticorrisive paint complete as required size and specification 2412.00
area not exc 1.5 sq.m.

168
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
STEEL DOOR

Per sq.m Rate in Taka

6-196 Steel door panelled with 18 BG MS sheet outer & inner frame with 'Z' bar
19x19x3mm size & 'T' section 19x19x3mm for Horizontal & vertical
division as per drawing incl. fabrication welding all fittings holdfast
embedded in PCC blocks & one coat of anticorrosive paint fixed 4048.00
complete in position.

6-197 Steel door panelled with 18 BG MS sheet outer & inner frame with 'Z' bar
38x38x6mm MS angle & 'T' section 25x25x3mm for Horizontal &
vertical division as per drawing incl. fabrication welding all fittings
holdfast embedded in PCC blocks & one coat of anticorrosive paint fixed 5405.00
complete in position.

6-198 Steel door half glazed with 3mm sheet glass fixed with putty, half
panelled with 18 BG MS sheet outer & inner frame with 'Z' bar
19x19x3mm size & 'T' section 19x19x3mm for Horizontal & vertical
division as per drawing incl. fabrication welding hold fast etc embedded 3769.00
in PCC blocks & painting with anticorrosive priming coat fixed complete
in position.

PLASTIC DOOR Rate in Taka

Per sq.m 25 mm thick 32 mm thick

6-199 Supply and fixing of framed and paneled (8 mm thick)
plastic door shutter including hanging with chowkat and 4373.00 4249.00
S S mongeries.
6-200 Supply and fixing of Hollow plastic door shutter
including hanging with chowkat and S S mongeries. - 2345.00

Per sq.m Rate in Taka

6-200A Supply and fixing of 10mm thick plastic sheet for cat door shutter making
with necessaries fittings complete as spd. 4675.00

6-201 Supply and fixing of 6 mm thick plastic Cat door shutter complete all as
1954.00
spd.
COLLAPSIBLE GATE

Per sq.m Rate in Taka

169
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-202 Collapsible gate made of standard MS channel & 19mx5mm thick FI bar
riveted with best quality rivet with top & bottom runner 50x50x6mm MS
'T' fixed in brick work PCC / RCC etc with suitable legs anchorage incl.
stop, handle & locking arrangement with two coats of paint fixed in 4267.00
position & complete in all respect.

170
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
ROLLING SHUTTER

Per sq.m

6-203 Rolling shutter made of 24 BG galvanized plain sheet with 3mm thick MS
plate guard rail made of shape on either ends 10cm wide fixed in PCC
blocks with suitable holdfast etc & roller made of standard quality spring
to be provided not more than 60 cm apart including locking arrangement
& covering of roller box with 24 BG galvanized plain sheet one coat of 4111.00
anticorrosive paint to MS works fixed in position & complete in all
respect.

ALUMINIUM FALSE CEILING Rate in Taka

Materials Add if fixed in

Per sq.m Fixing Only
& Labour repair

6-204
Blank See section-13

6-205 Blank

Rate in Taka
TERMITE TREATMENT TO DOORS & WINDOWS
Each
(Ground floor)

6-206 Dursban 20 EC or equivalent to doors to eliminate termites 1066.00

(1st floor & above)

6-207 Dursban 20 EC or equivalent to doors to eliminate termites 939.00

6-208 Dursban 20 EC or equivalent to windows to eliminate termites 908.00

LIPPED PANEL FLUSH DOORS Type of lipped panel

Burma
Per sq.m Champa Chapalish
Teak

171
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-209 Lipped panel flush doors 36 mm thick both
side lipped panel as specification supplied &
fixed completes but excl to mongaries (star
5344.00 3816.00 3816.00
Particles).

172
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
FLUSH DOORS
Type of vinyl laminated other side veneering

Per sq.m
Burma Teak Champa Chapalish

6-210 Flush doors as bath room doors 36 mm thick

solid timber around 19mm thick centre board
one side vinyl laminated & other side
veneered as specified supplied & fixed
completes but exc of mongeries (star 5344.00 3816.00 3816.00
Particles) (For 2.08mx0.76m to 2.08mx
1.06m).

6-211 - Ditto - but 2.08mx0.60m to 2.08mx0.68m 5333.00 3706.00 4339.00

Rate in Taka
6-212 Flush doors as bath room doors 36 mm thick solid timber around 19mm
thick centre board both side vinyl laminated as specified supplied & fixed
complete but excl of mongeries (Star Particles) (For 2.08mx0.76m to 3816.00
2.08mx1.06m)

6-213 - Ditto - but 2.08m x 0.60m to 2.08m x 0.68m 4463.00

Rate in Taka
JOBBING WORK Taking down & refixing
Removing to or
Same Other Taking down only
Each from store
opening opening

6-214 Steel gauzed door complete 329.00 659.00 165.00 75.00

Materials & Add if fixed in

JOBBING WORK Fixing Only
Labour Repair

6-215 5 mm thick and 450x1350 mm size looking

mirror fixed with clip/screw etc in any
position as spd. 1491.00 120.00 30.00

Per cu.m
Rate in Taka
6-216 Steel cupboard all inner MS sheet 22 BG and outer sheet
(covering all sides) 20 BG incl. Spray painting and
27077.00
complete with all necessary fittings all as spd.

173
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
Supply and Fixing
Per sq.m 7x7 mesh / 7x7 mesh / cm 28 4x4 mesh/cm 24
cm 32 gauze gauze gauze
6-217 Steel gauzed door panels filled with wire net
outer and inner frame with "Z" bar 19x19x3
mm size horizontal & vertical including
fabrication, welding, drilling, hold fast
3153.00 3151.00 3044.00
Embedded in pcc block and painting with
anticorrosive priming coat fixed complete in
position.

Per cu.m Rate in Taka

6-218 Chowkat for windows glazed or gauzed incl. Hold fast
fixed in position as spd (Garjan) 146318.00

6-219 Chowkat for door gates incl. Hold fast fixed in position
all as spd (Garjan) 133531.00

6-220 Chowkat for CSWs glazed or gauzed incl. Hold fast and
fixed in position all as spd (Garjan) 144109.00

Per sq.m

6-221 Steel glazed sliding windows with 5 mm glass, outer

frame 25x25x3 mm angle and 19x19x3 mm angle for
shutter frame, horizontal and vertical division all as spd
incl. Fabrication, welding with all fittings hold fast
embedded in PCC blocks (1:2:4) and painting with 8241.00
anticorrosive priming coat, fixed complete in position (
area exc. 1.50 sq.m each)

Rate in Taka
Resecur
JOBBING WORK Taking down & refixing
ing
Removing to or
without Same Other Taking down
Each from store
taking opening opening only
down

6-222 Window shutter only 60.00 108.00 329.00 46.00 48.00

Materials & Labour

Per sq.m 5 mm thick 3 mm thick

6-223 Lead sheet as in wall plate, door or in any other position
all as spd. 12791.00 9831.00

174
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

Per sq.m Rate in Taka

6-224 Steel cupboard outer frame & shutter made with 18 BG
sheet & shelf made with 20 BG sheet incl fabrication,
welding with all fittings and one coat of anticorrosive
paint fixed in position complete 4275.00

6-225 Steel glazed sliding windows with 5 mm glass, outer

frame 25x25x3 mm angle and 19x19x3 mm angle for
shutter frame, horizontal and vertical division all as spd
incl. Fabrication, welding with all fittings hold fast
embedded in PCC (1:2:4) blocks and painting with 7976.00
anticorrosive priming coat, fixed complete in position (
area n exc. 1.50 sq.m each)

Supply and Fixing

Venetain Fixed
6-226 Steel glazed window for stair case made of 19x19x3
mm angle iron outer frame internal panels made of
19x19x3 mm angle iron, fixed panels/Venetian panels
filled with 3 mm thick sheet of glass fixed with putty
incl. Fabrication, welding hold fast embedded in PCC 5042.00 2304.00
blocks and painting with anticorrosive priming coat,
fixed complete in position.

175
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

ALUMINIUM DOOR & WINDOWS Rate in Taka

Materials Add if fixed in

Per sq.m Fixing only
& Labour repair
6-227 Supply and fixing of aluminium fixed
window / partition as per AAMA standard
specification having 1.5 mm thick, 90-95
mm wide, outer bottom top side section, all
aluminium member will be anodized natural
colour with a coat not less than 15 microne
in thickness and density of 4 mg / cm2 3644.00 832.00 208.00
including all accessories, keeping provision
of 5 mm thick glass / spandrel (Glass /
spandrel to be paid under relevant item) and
sealant as spd. (Area exceeding 1.90 sq.m)

6-228 - Ditto - but anodized Bronze colour as spd.

(Area exceeding 1.90 sq.m) 3835.00 832.00 208.00

6-229 Supply and fixing of aluminium fixed

window / partition as per AAMA standard
specification having 1.5 mm thick, 75 mm
wide, outer bottom top side section, all
aluminium member will be anodized natural
colour with a coat not less than 15 microne
in thickness and density of 4 mg / cm2 3002.00 832.00 208.00
including all accessories, keeping provision
of 5 mm thick glass / spandrel (Glass /
spandrel to be paid under relevant item) and
sealant as spd. (Area exceeding 1.90 sq.m)

6-230 - Ditto - but anodized Bronze colour as spd.

(Area exceeding 1.90 sq.m) 3161.00 832.00 208.00

6-231 Supply and fixing of aluminium sweing door

as per AAMA standard specification all
aluminium member will be anodized natural
colour with a coat not less than 15 microne
in thickness and density of 4 mg / cm2
including all accessories like handle, hydrulic 7896.00 1696.00 424.00
door closer, pivot etc. keeping provision for
fixing 5 mm thick glass / aluminium spandrel
as spd. (Area exceeding 1.90 sq.m)

176
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-232 - Ditto - but anodized Bronze colour as spd
(Area exceeding 1.90 sq.m) 7996.00 1696.00 424.00

177
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
ALUMINIUM DOOR & WINDOWS Rate in Taka

Materials Add if fixed in

Per sq.m Fixing only
& Labour repair
6-233 Supply and fixing of aluminium sliding door
/ window as per AAMA standard
specification having 1.5 mm thick, 90-95
mm wide, outer bottom top side, 1.5 mm
thick shutter top bottom lock inter lock
section all aluminium member will be
anodized natural colour with a coat not less
than 15 microne in thickness and density of 4 4619.00 983.00 196.60
mg / cm2 including all accessories like lock
(Japan), rular, handle, stopper etc. keeping
provision of 5 mm thick glass / spandrel
(Glass / spandrel to be paid under relevant
item) and sealant as spd . (Area exceeding
1.90 sq.m)
6-234 - Ditto - but anodized Bronze colour as spd. 4199.00 983.00 196.60
(Area exceeding 1.90 sq.m)

6-235 Supply and fixing of aluminium sliding door

/ window as per AAMA standard
specification having 1.5 mm thick, 75 mm
wide, outer bottom top side, 1.5 mm thick
shutter top bottom lock inter lock section all
aluminium member will be anodized natural
colour with a coat not less than 15 microne
in thickness and density of 4 mg / cm2 3885.00 983.00 196.60
including all accessories like lock (Japan),
rular, handle, stopper etc. keeping provision
of 5 mm thick glass / spandrel (Glass /
spandrel to be paid under relevant item) and
sealant as spd. (Area exceeding 1.90 sq.m)

6-236 - Ditto - but anodized Bronze colour as spd

(Area exceeding 1.90 sq.m) 3992.00 983.00 196.60

178
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
ALUMINIUM DOOR & WINDOWS Rate in Taka
Materials Add if fixed in
Per sq.m Fixing only
& Labour repair
6-237 Supply and fixing of aluminium sliding door
/ window as per AAMA standard
specification having 1.5 mm thick, 90-95
mm wide, outer bottom top side, 1.5 mm
thick shutter top bottom lock inter lock
section all aluminium member will be
anodized natural colour with a coat not less
than 15 microne in thickness and density of 4
5989.00 1311.00 262.00
mg / cm2 including all accessories like lock
(Japan), rular, handle, stopper etc. keeping
provision of 5 mm thick glass / spandrel
(Glass / spandrel to be paid under relevant
item) and sealant as spd (Area not exceeding
1.90 sq.m)

6-238 - Ditto - but anodized Bronze colour as spd 5612.00 1311.00 262.00
(Area not exceeding 1.90 sq.m)

6-239 Supply and fixing of aluminium sliding door

/ window as per AAMA standard
specification having 1.5 mm thick, 75 mm
wide, outer bottom top side, 1.5 mm thick
shutter top bottom lock inter lock section all
aluminium member will be anodized natural
colour with a coat not less than 15 microne
in thickness and density of 4 mg / cm2 5672.00 1311.00 262.00
including all accessories like lock (Japan),
rular, handle, stopper etc. keeping provision
of 5 mm thick glass / spandrel (Glass /
spandrel to be paid under relevant item) and
sealant as spd (Area not exceeding 1.90
sq.m)

6-240 - Ditto - but anodized Bronze colour as spd 5345.00 1311.00 262.00
(Area not exceeding 1.90 sq.m)

179
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description

ALUMINIUM DOOR & WINDOWS Rate in Taka

Materials Add if fixed in

Per sq.m Fixing only
& Labour repair
6-241 Supply and fixing of aluminium sliding
shutter net as per AAMA standard
specification having 1.5 mm thick, section
all aluminium member will be anodized
natural colour with a coat not less than 15
microne in thickness and density of 4 mg / 2523.00 742.00 148.40
cm2 including all accessories like rular,
handle, stopper etc fixed with mosquito
proof fibre net 7x7 mesh per cm as spd.

6-242 - Ditto - but anodized Bronze colour as spd 2549.00 742.00 148.40

6-243 Supply and fixing of standrad aluminium

spandrel fixed to aluminium frame with all
accessories as required for natural colour. 2455.00 269.00 53.80

6-244 - Ditto - but anodized Bronze colour as spd 2455.00 269.00 53.80

6-245 supply and fixing of standard aluminium

fixed and louver window as per AAMA
specification silver colour including net 10357.00 921.00 184.20
shutter and all other accessories as spd.

6-246 Venetian blind 25 mm wide with all

accessories such as cotton newar, sash cord,
wheel etc complete (Foreign made) 3485.00 665.00 111.00

6-247 Vertical blind 75-125 mm wide with all

accessories such as cotton newar, sash cord, 4174.00 665.00 111.00
wheel etc complete
6-248 Supply and fixing of Vertical Blind with 125
mm wide synthetic fibre cloth with Roller &
3688.00 462.00 77.00
Rail as spd.

New Item

Doors Windows
MONGERIES FOR DOORS,
WINDOWS & CSWS
180
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
MONGERIES FOR DOORS,
WINDOWS & CSWS Double Single
Double leaf Single leaf
leaf leaf

Each
6-158 A SS mongaries door,
windows and CSW as spd 1363.00 854.00 862.00 569.00

PLASTIC DOOR
Per sq.m Rate in Taka
6-199 (A) S / F Plastic door 36 mm
thick (solid) framed &
paneled (8mm thick) shutter
incl hanging with chowkat
4863.00
and S S mongaries.

6-200 (i) S / F Hollow Plastic door 36

mm thick shutter incl
hanging with chowkat and S 3441.00
S mongaries.
ALUMINIUM DOOR & WINDOWS Rate in Taka

Materials Add if fixed in

Per sq.m Fixing only
& Labour repair

6-249 Supply and fixing of aluminium fixed window /

partition as per AAMA standard specification having
1.5 mm thick, 90-95 mm wide, outer bottom top side
section, all aluminium member will be anodized
natural colour with a coat not less than 15 microne in
thickness and density of 4 mg / cm2 including all
accessories, keeping provision of 5 mm thick glass /
3491.00 665.00 166.30
spandrel (Glass / spandrel to be paid under relevant
item) and sealant as spd. (Area exceeding 1.90 sq.m)
(For ALTECH)

6-250 Ditto- but anodized Bronze colour as spd (Area

exceeding 1.90 sq.m) (For ALTECH) 3555.00 665.00 166.30

6-251 Supply and fixing of aluminium fixed window /

partition as per AAMA standard specification
having 1.5 mm thick, 75 mm wide, outer
bottom top side section, all aluminium member
will be anodized natural colour with a coat not
less than 15 microne in thickness and density of
3260.00 665.00 166.30
4 mg / cm2 including all accessories, keeping
provision of 5 mm thick glass / spandrel (Glass
/ spandrel to be paid under relevant item) and
sealant as spd. (Area exceeding 1.90 sq.m) (For
ALTECH)

181
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-252 Ditto - but anodized Bronze colour as spd.
(Area exceeding 1.90 sq.m) (For ALTECH) 3316.00 665.00 342.00

6-253 Supply and fixing of aluminium sweing door as

per AAMA standard specification all aluminium
member will be anodized natural colour with a
coat not less than 15 microne in thickness and
density of 4 mg / cm2 including all accessories
7522.00 1368.00 342.00
like handle, hydrulic door closer, pivot etc.
keeping provision for fixing 5 mm thick glass /
aluminium spandrel as spd. (Area exceeding
1.90 sq.m) (For ALTECH)

6-254 Ditto - but anodized Bronze colour as spd (Area

exceeding 1.90 sq.m) (For ALTECH) 7604.00 1368.00 342.00

6-255 Supply and fixing of aluminium sliding door / window

as per AAMA standard specification having 1.5 mm
thick, 90-95 mm wide, outer bottom top side, 1.5 mm
thick shutter top bottom lock inter lock section all
aluminium member will be anodized natural colour
with a coat not less than 15 microne in thickness and
density of 4 mg / cm2 including all accessories like
4449.00 787.00 157.40
lock (Japan), rular, handle, stopper etc. keeping
provision of 5 mm thick glass / spandrel (Glass /
spandrel to be paid under relevant item) and sealant as
spd . (Area exceeding 1.90 sq.m) (For ALTECH)

6-256 Ditto - but anodized Bronze colour as spd.

(Area exceeding 1.90 sq.m) (For ALTECH) 4238.00 787.00 157.40

6-257 Supply and fixing of aluminium sliding door /

window as per AAMA standard specification
having 1.5 mm thick, 75 mm wide, outer
bottom top side, 1.5 mm thick shutter top
bottom lock inter lock section all aluminium
member will be anodized natural colour with a
coat not less than 15 microne in thickness and
density of 4 mg / cm2 including all accessories 4009.00 787.00 157.40
like lock (Japan), rular, handle, stopper etc.
keeping provision of 5 mm thick glass /
spandrel (Glass / spandrel to be paid under
relevant item) and sealant as spd. (Area
exceeding 1.90 sq.m) (For ALTECH)

6-258 Ditto - but anodized Bronze colour as spd (Area

exceeding 1.90 sq.m) (For ALTECH) 4081.00 787.00 157.40

182
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-259 Supply and fixing of aluminium sliding door /
window as per AAMA standard specification
having 1.5 mm thick, 90-95 mm wide, outer
bottom top side, 1.5 mm thick shutter top
bottom lock inter lock section all aluminium
member will be anodized natural colour with a
coat not less than 15 microne in thickness and 5815.00 1049.00 210.00
density of 4 mg / cm2 including all accessories
like lock (Japan), rular, handle, stopper etc.
keeping provision of 5 mm thick glass /
spandrel (Glass / spandrel to be paid under
relevant item) and sealant as spd (Area not
exceeding 1.90 sq.m) (For ALTECH)
6-260 Ditto - but anodized Bronze colour as spd (Area
not exceeding 1.90 sq.m) (For ALTECH) 5628.00 1049.00 210.00

6-261 Supply and fixing of aluminium sliding door /

window as per AAMA standard specification
having 1.5 mm thick, 75 mm wide, outer
bottom top side, 1.5 mm thick shutter top
bottom lock inter lock section all aluminium
member will be anodized natural colour with a
coat not less than 15 microne in thickness and 5634.00 1049.00 210.00
density of 4 mg / cm2 including all accessories
like lock (Japan), rular, handle, stopper etc.
keeping provision of 5 mm thick glass /
spandrel (Glass / spandrel to be paid under
relevant item) and sealant as spd (Area not
exceeding 1.90 sq.m) (For ALTECH)
6-262 Ditto - but anodized Bronze colour as spd (Area
not exceeding 1.90 sq.m) (For ALTECH) 5442.00 1049.00 210.00

6-263 Supply and fixing of aluminium sliding shutter

net as per AAMA standard specification having
1.5 mm thick, section all aluminium member
will be anodized natural colour with a coat not
less than 15 microne in thickness and density of 2172.00 585.00 117.00
4 mg / cm2 including all accessories like rular,
handle, stopper etc fixed with mosquito proof
fibre net 7x7 mesh per cm as spd. (For
ALTECH)
6-264 Ditto - but anodized Bronze colour as spd (For
ALTECH)
2204.00 585.00 117.00

183
RESTRICTED
 RESTRICTED
SECTION-6
DOORS AND WINDOWS RATES

Item Description
6-265 supply and fixing of standard aluminium fixed
and louver window as per AAMA specification
silver colour including net shutter and all other
11262.00 737.00 147.40
accessories as spd.(For ALTECH)

6-266 Supplying and fixing 6 mm thick Mercury glass 4587.00 666.00

as a Curtain wall fixed with frame and
necessary fittings/fixtures complete all as
specified.

6-267 Supplying and fixing 10 mm thick clear glass as 7144.00 786.00

a Curtain wall fixed with frame and necessary
fittings/fixtures complete all as specified.

6-268 Supply and fixing of steel Design window grill 3327.00

made with 12x12mm size MS square bar and
19x5mm FI bars including cutting, welding,
grinding and one coat of anticorrosive paint
complete as required size and specification.

184
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
Rate in Taka
TOWER BOLTS Length in Centimetre
Each 10.00 15.00 20.00
7-1 Supply & fixing of wrought iron tower bolt
with bright sheet & fixed with sockets or let 54.50 62.70 70.00
into any materials

7-2 -Ditto-but fixing only 29.90 29.90 30.00

7-3 -Ditto-but add fixed in repair 7.50 7.50 7.00

7-4 Supply & fixing brass tower bolts with bright
sheets & fixed with sockets brass screws or
let into any materials 150.50 215.00 274.80

7-5 -Ditto-but fixing only 29.90 29.90 29.90

-Ditto-but add if fixed in
7-6 7.50 7.50 7.50
repair
BOLT (All drop) Length in Centimetre
Each 25.00 30.00 45.00
7-7 Wrought iron sliding & locking with staple 15 231.00 266.00 438.00
mm diameter

7-8 -Ditto-but fixing only 59.90 59.90 59.90

-Ditto-but add if fixed in
7-9 15.00 15.00 15.00
repair
7-10 Brass sliding & locking bolt with staple 15 583.00 611.00 -
mm diameter
7-11 -Ditto-but fixing only 59.90 59.90 -
-Ditto-but add if fixed in
7-12 15.00 15.00 -
repair
HINGES Length in Centimetre
Each 5.00 7.50 10.00
7-13 Steel butt supply and fixing 40.80 49.20 58.00
7-14 -Ditto-but fixing only 23.90 23.90 23.90
-Ditto-but add if fixed in
7-15 6.00 6.00 6.00
repair
Length in Centimetre
5.00 7.50 10.00 12.50
7-16 Brass but supply and if fixing with
brass screws 84.80 135.80 241.90 311.00

178
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
7-17 -Ditto-but fixing only 23.90 23.90 23.90 23.90
-Ditto-but add if fixed in
7-18 6.00 6.00 6.00 6.00
repair

179
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
Rate in Taka

HOOKS AND EYES Length in Centimetre

Each 25.00 30.00 45.00 60.00

7-19 Hooks & eyes wrought iron (pintle)
with riveted hooks on plates (on hooks
prepared for leading) heavy pattern 84.00 91.00 111.00 136.00
welded hand made

7-20 -Ditto-but fixing only 35.90 35.90 35.90 35.90

-Ditto-but add if fixed in
7-21 9.00 9.00 9.00 9.00
repair
SPRING HINGES Length in Centimetre

Per set 10.00 12.50 15.00

7-22 Double action brass spring hinges fixed with 1666.82 2149.00 2631.00
brass screws.

7-23 -Ditto-but fixing only 83.80 83.80 83.80

-Ditto-but add if fixed in
7-24 21.00 21.00 21.00
repair
7-25 Single action brass spring hinges fixed with 1736.00 1667.00 2218.00
brass screws.

7-26 -Ditto-but fixing only 83.80 83.80 83.80

-Ditto-but add if fixed in
7-27 21.00 21.00 21.00
repair
7-28 Double action steel spring hinges fixed with 703.00 910.00 1213.00
steel screws.

7-29 -Ditto-but fixing only 83.80 83.80 83.80

-Ditto-but add if fixed in
7-30 21.00 21.00 21.00
repair
7-31 Single action steel hinge 565.00 772.00 -
7-32 -Ditto-but fixing only 83.80 84.00 -
-Ditto-but add if fixed in
7-33 21.00 21.00 0.00
repair
HYDRAULIC DOOR CLOSER

Materials & Add if fixed in

Each Labour
Fixing only
repair

7-34 Hydraulic Door closer (Japan) 2348.00 269.00 67.00

180
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
DOOR STOPPER Rate in Taka

Materials & Add if fixed

Each Fixing only
Labour in repair

7-35 Foot press stopper (Japan / china made) 239.50 34.00 9.00

7-35A Plastic block local made 156.00 46.00 11.00

LOCK Rate in Taka
Supplied & Add if fixed in
Each fixed
Fixing only
repair

7-36 Yale lock (china made) 2325.00 192.00 48.00

7-37 Yale lock (Local made) 948.00 191.60 48.00

7-38 Yale lock (England made) 3910.00 191.60 47.90

7-39 Rim lock with round knob (Japan Made) 1912.00 191.60 48.00

7-40 Rim lock with round knob (local) 948.00 191.60 48.00
LOCKS (ORDINARY CUP BOARD)
Each
7-41 5 cm long cup board lock with round brass
wards incl. female portion (iron body) 169.00 86.20 22.00
approved quality
7-42 7.5 cm long cup board lock with round brass
wards incl. female portion (iron body) 251.00 86.20 21.60
approved quality
7-43 5 cm long cup board lock with round brass
wards incl. female portion (Brass body) 705.00 86.20 21.60
approved quality
7-44 7.5 cm long cup board lock with round brass
wards incl. female portion (Brass body) 808.00 86.20 22.00
approved quality
LOCKS (DESK, DRAWER, FLUSH CUP BOARD)
Supplied & Add if fixed in
Each fixed
Fixing only
repair

7-45 Iron 6.25 cm long 154.00 71.80 18.00

7-46 Iron 7.5 cm long 210.00 71.80 18.00

181
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description

7-47 Brass 6.25 cm long 416.00 71.80 18.00

7-48 Brass 7.5 cm long 407.00 71.80 18.00

182
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
LOCKS FURNITURE Rate in Taka
Each Supplied & fixed diameter in cm Add if fixed in
Fixing only
repair
3.75 5.00 6.25
7-49 Cast brass knobs with solid
necks, cast brass cover rose &
catchments wrought iron
311.00 374.00 401.00 29.90 7.50
spindle wilkes naces or equal
& approved pattern

Supplied & fixed diameter

CLEATS BELAYING in cm Add if fixed in
Fixing only
repair
Each Wrought Brass

7-50 10 cm for cords etc fixed on & incl.

circular wooden disc with hook 80.10 111.70 14.40 3.60
wrought iron
EYES SCREWS
Each
7-51 0.87 cm to 1.25 cm internal dia for 7.70 20.10 3.60 0.90
cords
CATCHES SPRING

Each
7-52 5 cm with projecting ring & with
staples or striking plates (for fan light
hung at bottom opening in wards or - 59.90 12.00 3.00
hung at top opening out wards)

7-53 -Ditto-but 6.25 cm - 67.10 12.00 3.00

PIVOTS AND SOCKETS (OR SASH CENTRE)

Each
7-54 5.72 cm plates as for swing sashes 68.00 260.00 25.10 6.30
iron

Supplied & fixed diameter in

CASEMENT STAYS cm Add if fixed
Fixing only
in repair
Each 17.5 25.00 30.00
7-55 Casement stays quadrant for
fan light iron 112.60 147.30 180.80 29.90 7.50

7-56 -Ditto-but brass 235.90 283.80 298.20 29.90 7.50

183
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
CLEATS HINGE Rate in Taka
Materials & Add if fixed in
Each Labour
Fixing only
repair

7-57 Cleats hard wood not exc. 250 cu.cm wrought

& Splayed to doors & windows incl. 7.50 cm
pressed steel butt hinge & fixing with screws. 139.20 18.00 4.50

-Ditto-but 7.50 cm brass

7-58 370.20 18.00 4.00
hinge
HANDLES
Each
7-59 Bow 15 cm over all wrought iron 53.30 18.00 4.50
7-60 -Ditto-but brass 144.10 18.00 4.00
7-61 Bow 25 cm over all brass 'Canted' for swing 132.60 18.00 4.50
doors
7-62 Drawers handles (drop handle & 2 screw on
plates) 7.50 cm grip brass 127.30 26.30 7.00

7-63 Flush pattern handle with dished plates, 7.50

cm grip brass 181.00 26.30 6.60

7-64 15 cm iron handle for steel windows 75.50 23.90 6.00

7-65 15 cm brass handle for steel windows 161.70 23.90 6.00
7-66 Adjustable stay/stopper for steel window made
of FI bar (19mmx3mm) 53.80 23.90 6.00

7-67 Adjustable stay stopper for steel window made

of brass 208.00 23.90 6.00

HOOKS
Each
7-68 Hat & coat hooks strong make 17.00 cm or 158.70 23.90 6.00
over brass.
HOOKS AND EYES
Each
7-69 15.00 cm long cabin or casement with eyes
complete screw type made of galvanized iron 34.40 18.00 4.00

7-70 20.00 cm long cabin or casement with eyes

complete screw type iron 38.60 18.00 4.50

184
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
7-71 15.00 cm long cabin or casement with eyes
complete screw type made of brass 100.60 18.00 4.00

7-72 20.00 cm long cabin or casement with eyes

complete screw type made of brass 121.20 18.00 4.50

185
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
KNOBS Rate in Taka
Materials & Add if fixed in
Each Labour
Fixing only
repair

7-73 3.15 cm cup board knob (iron) plain with 52.40 18.00 4.00
screwed end
7-74 3.15 cm cup board knob (brass) with nut 270.00 18.00 4.50
screwed and rose

HASPS & STAPLES

Each
7-75 Stout steel wire loop hinged to plate with
staple on plate (holes for bolts & screws)
china length over all 15 cm one bolt to hinge 89.80 14.40 4.00
plate in addition to screws

7-76 Ditto-but of flat bar wrought iron with hinged

joint china 10 cm to 15 cm 75.40 14.40 3.60

SPRING FOR DOORS

Each
7-77 15 cm ordinary rat tail (box pattern) extra
strong china steel including friction plate. 629.00 77.80 19.50

7-78 15 cm patent helical spring made of brass

including friction plate. 1179.00 77.80 19.00

7-79 15 cm patent helical spring made of

Aluminium including friction plate. 387.00 77.80 19.50

POLES CURTAINS ETC.

Per Metre

7-80 Poles (1st class soft wood) turned stained &

polished n. exc 2.54 cm dia . 232.00 53.90 13.00

Each
7-81 Ends(1st class soft wood) for curtain poles
turned (incl double ended steel screws) stained
32.70 8.40 2.00
& varnished

186
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
7-81A Supply and fixing of 50 mm dia brass ring for
hanging curtain as spd.
95.10 6.30 2.00

187
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description

CURTAINS RAIL & PIPE ETC. Rate in Taka

Materials & Add if fixed in

Per metre Labour
Fixing only
repair

7-82 Aluminium curtain rail incl. ring approved 113.80 18.00 4.00
foreign made
7-83 Aluminium curtain rail incl. ring approved 104.90 18.00 4.00
local made
7-84 Aluminium tube / pipe 19 mm dia for curtain
including End clamp and fittings as required. 287.00 29.00 7.00

7-85 Aluminium tube / pipe 25 mm dia for curtain

including End clamp and fittings as required. 276.00 35.90 9.00

7-86 Aluminium tube / pipe 25 mm dia foreign

made any colour for curtain including End
349.00 35.90 9.00
clamp and fittings as required.

7-87 Sash cords for CS window best white country

cotton 1.87 cm girth 17.70 5.70 1.00

7-88 -Ditto-but Nylon 17.70 5.70 1.00

Each
7-88A Supply and fixing of Tarssal stand foreign
made for curtain including fittings complete as 1807.00 65.90 16.50
spd.
ALUMINIUM ACCESSORIES Rate in Taka

Materials Add if fixed

Each Fixing only
& Labour in repair

7-89 Sliding lock key part-reliance Japan Made 456.00 167.60 42.00

7-90 Sliding show part Japan Made 436.00 167.60 42.00

Per metre
7-91 Netting rubber round Japan Made 19.20 9.60 2.00

7-92 Netting rubber flat Japan Made 44.30 9.60 2.00

Each

188
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description

7-93 Netting angle metal Japan Made 150.90 47.90 12.00

7-94 Netting wheel Japan Made 97.00 28.70 7.00

189
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
ALUMINIUM ACCESSORIES Rate in Taka

Materials Add if fixed

Per metre & Labour
Fixing only
in repair

7-95 Fixed rubber gasket (single) Japan Made 16.80 7.20 2.00

7-96 -Ditto-but double -ditto- 19.20 7.20 2.00

7-97 Single Mohair Japan Made 31.10 7.20 2.00

7-98 Sliding rubber gasket Japan Made 26.30 9.60 2.00

Each
7-99 Wheel (Get on) Japan Made 184.00 95.80 24.00
Per metre
7-100 Double Mohair Japan Made 28.70 4.80 1.00
Each

7-101 Sliding lock Reliance Japan Made 491.00 167.60 42.00

7-102 Wheel (Matex) Japan Made 140.10 71.80 18.00

7-103 38mm counter sunk screw Japan Made 7.20 4.80 1.00

7-104 -Ditto-but 25mm -ditto- 8.40 4.80 1.00

7-105 Flush bolt Japan Made 947.00 479.00 120.00

7-106 Rivet Pin Japan Made 6.60 4.80 1.00

7-107 Diamond door closer Japan Made 4999.00 629.00 157.00

7-108 Alpha door lock Japan Made 2002.00 419.00 105.00

190
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
MISCELLANEOUS Rate in Taka
Materials & Add if fixed in
Each Labour
Fixing only
repair

7-109 Supply & fixing EYE VIEWER as in wooden 272.00 51.30 13.00
door
7-110 Supply & fixing chromium plated security
chain as in door shutter 498.00 51.30 13.00

7-111 250 mm long fancy type bow handle (foreign

1779.00 119.70 30.00
made) fixed with screw complete
7-112 Spring for rolling shutter incl. Fixing in
position as spd (Best quality) 1034.00 659.00 165.00

7-113 19 mm wide and 1400 mm long brass hinges

fixed with brass screw in any position as spd. 1698.00 119.70 30.00

7-114 375 mm long brass tower bolt (heavy type)

with bright sheet fixed with brass screw in any 663.00 119.70 30.00
position as spd
Materials & Labour Add if fixed in
130 mm Fixing only
100 mm long repair
long
7-115 Fancy type brass bow handle fixed
with screw in any position as spd. 435.00 435.00 29.90 7.00

Materials & Labour Add if fixed in

Fixing only
repair
Per Metre 25 mm dia 19 mm dia

7-116 Brass pipe 1.5 mm wall thick as in

stair/verandah railing or in any
position assembling by welding 1223.00 1046.00 269.70 67.00
(Welding to be paid separately ) as
spd.
Materials & Add if fixed in
Each Labour
Fixing only
repair
7-117 Concealed lock with one side handle for steel
cupboard / almirah 836.00 299.00 75.00

Length in Centimetre

Each 5.00 7.50

7-118 Supply and fixing of wrought iron tower bolt with bright
sheet fixed complete 45.50 49.00

7-119 -Ditto- but fixing only. 26.30 26.30

7-120 -Ditto- but add if fixed in repair 6.40 6.60

191
RESTRICTED
 RESTRICTED
SECTION-7
MONGERY RATES
Item Description
7-121 Supply and fixing of brass tower bolt with bright sheet 87.80 105.00
fixed complete

7-122 -Ditto- but fixing only 21.10 26.30

7-123 -Ditto- but add if fixed in repair 6.60 6.60

New Item

SLIDING BOLTS
Rate in Taka
Length in Centi Metre

Unit Each 25.00 30.00

7-10(A) S.S. sliding & locking bolt
with staple 15 mm dia 473.00 611.00
7-11(A) Ditto-but fixing only
59.90 59.90
7-12(A) Ditto-but add fixed in repair
15.00 15.00

Rate in Taka

Metre
Rate per metre
7-84(A) Stainless steel pipe 19mm dia
2mm thick for curtain incl end
380.00
clamp and fitting as required

7-86(A) Stainless steel pipe 25mm dia

2mm thick for curtain incl end 493.00
clamp and fitting as required

192
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
STRUCTURAL STEEL WORK Rate in Taka

Fabrication
Materials & Fixing in
Per Kilogram & erecting
Labour repairs
only
8-1 Joist, channel, angle or the sections fixed
independently without connecting plates etc cut 185.00 23.40 5.00
to ordinary lengths

8-2 Purlins, hips & the like main & cross beams or
girders with angle cleats or their connecting
plates cut to dead length where required 179.70 18.10 5.00

8-3 Built up girders ordinary & compound

stanchions with or without heads base &
connection & plates for wheel runs platforms 193.40 31.80 7.00
gate/door covering incl. holes screws bolts nuts
& rivets etc.
8-4 Built up girders ordinary & compound
stanchions with or without heads base &
connection & plates for wheel runs platforms
186.20 24.60 6.00
gate/door covering with Gas/Electric welding
etc (Welding to be paid separately)

8-5 Roof trusses framed structure walls partition &

heavy brackets incl. distance pieces, purlins
cleats etc & all connections with rivets. 213.00 49.70 6.00

8-6 Roof trusses framed structure walls partition &

heavy brackets incl. distance pieces, purlins
cleats etc & all connections with welding 197.00 35.40 6.00
(welding will be paid separately).

8-7 Framed stair-case, framed doors & gates

prepared for attachment of covering incl. hooks
hinges sliding or hanging door, fitting fastenings
(excl. locks) & hanging & fixed complete 241.70 78.50 7.00
covering to be paid extra as 'supplied & fixed'

195
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
8-8 Framed stair-case, framed doors & gates
prepared for attachment of covering incl. hooks,
hinges sliding or hanging door, fitting fastenings
(excl. locks)& hanging & fixed complete 218.30 56.70 6.00
covering to be paid extra as 'supplied & fixed
(welding to be paid separately)

196
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
General Steel works
Rate in Taka

Per Kilogram
Fabrication
Materials & Fixing in
& erecting
Labour repairs
only

8-9 Hold-fasts guard bars, straps for wooden trusses,

holding down bolts with washers ladders, railing
brackets, pipe support, tie rods & blusters
chimney bars, chains rings shackles hinges &
type gratings for gullies etc incl. bolts nuts 190.40 101.80 25.00
washers rivets threading forging, letting into
stone or brick work etc. complete with rivets.

8-10 Hold-fasts guard bars, straps for wooden trusses,

holding down bolts with washers, ladders, railing
brackets, pipe support, tie rods & blusters,
chimney bars, chains rings shackles hinges &
type gratings for gullies etc with Gas/Electric 152.90 64.30 16.00
welding complete (Welding to be paid
separately)

8-11 Wind ties including punching and fixing in any

position complete 104.80 16.20 4.00

8-12 Guard bars grills, railing, ladders, brackets,

framed etc cut to dead lengths reduced to size
shapes, figure etc incl. punching, drilling holes if
necessary & fixing assembling by welding or
179.70 18.10 5.00
without the use of bolts nuts rivets washers etc &
erection/ fixing in position incl. making good the
disturbed surfaces (welding to be paid
separately)
Supplied & Fixed
Exc. 1 Kg &
Under 1 Kg
under 3 Kg.
8-13 Small articles hammered from the anvil, heated if necessary
reduced to any size of figure required incl. drilling,
punching, riveting & roughly filed if necessary. Articles 329.00 281.00
which can not be measured but can only be weighted

8-14 Fabrication & Fixing only 164.00 116.00

8-15 Fixing only in repair 41.00 29.00

197
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
Per metre Gas Electric

8-16 Gas or Electric welding of MS or wrought iron 661.00 261.00

198
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
Rate in Taka

SCREW BOLTS Supplied & fixed length in CM

Exc 7.5 cm
N. exc. 7.5 Exc 15cm &
Each n.exc. 15
cm n.exc 30cm
cm
8-17 Bolts n.exc 9mm dia with hexagon square cap of
cheesed heads screwed one or both ends or one
end enlarged or jagged or lewised, each with one 22.20 42.50 56.00
washer and one hexagon or square nut

8-18 -Ditto- fixing only 9.00 9.00 18.00

8-19 -Ditto- fixed in repair 2.20 2.20 4.00

8-20 Bolts exec 9mm but n. exec 19mm dia with

hexagon square cap or cheese heads screwed one
or both ends or both end or one end enlarged or 34.10 71.60 88.00
jagged or lewised, each with one washer and one
hexagon or square nut

8-21 -Ditto- fixing only for length n.exe 7.5 cm 13.50 20.20 27.00

8-22 -Ditto- add if fixed in repair 3.40 5.00 7.00

8-23 Bolts exec 18mm but n. exec 25mm dia with

hexagon square cap or cheesed head screwed
one or both ends or one end enlarged or jagged
or lewised, each with one washer and one 51.80 86.00 102.00
hexagon or square nut

8-24 -Ditto- fixing only 13.50 20.20 27.00

8-25 -Ditto- fixed in repair 3.40 5.10 7.00

Supplied & fixed each
CAST IRON WORKS article
Not exc 6
Per Kilogram Exc 6 Kg
kg
8-26 Cast iron work un machined in brackets gully tops, grating,
frames, fire doors & frames, air grating, dampers & frames 194.60 145.00
stop cock boxes & the like.

199
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description

8-27 -Ditto-but machined turned as in pulley etc 293.00 195.00

200
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
STEEL REINFORCEMENT Rate in Taka

Supplied &
Per kg Except bars
Fixed

8-28 Bars round square or flat including binding & placing

reinforcement in position BDS Grade 275,(40,000
88.00 12.00
PSI/145.038 N/mm² (1 Mpa=145.038 PSI)

- Ditto - but BDS grade 350 (50,763.3) = 350

8-29 89.00 12.00
Nmm²)
-Ditto-but using deformed bars, ditto yield strength BDS
8-30 grade 275, (40,000 PSI/145.038 N/mm² (1 Mpa=145.038 91.00 13.00
PSI)
-Ditto-but using Tor-steel bars BDS grade 400 (60000
8-31 97.00 13.00
PSI/413.68 Nmm²)

-Ditto-but using deformed bars, yield strength BDS grade

8-32 95.00 13.00
400 (60000 PSI/413.68 Nmm²)

Supplied &
Each Fixed
Except bars

8-33 Supply Fan hook of 1.60 cm (16mm) dia MS rod fabrication

& fixing in position in all floors over all 0.90 meter long 190.00 83.00

Supplied & Fixed weight Per Square metre

of fabric

Exc. 2.50 Kg
Not exc. 2.50
Per Square metre n. exec 4.50 Except fabric
Kg
Kg

8-34 Expanded metal, BRC fabric welmesh etc in

reinforcement or in other position or lathing for
plaster to shape & size is required incl. binding
415.00 722.00 76.00
with 14 SWG wire nails staples etc & placing in
position measured net.

PLAIN SHEETING Supplied & Fixed gauge

Fixing only
Per Square metre 26 BG 24 BG 22 BG
8-35 Galvanized sheeting in walls, floor,
ceiling etc.
719.00 940.00 1149.00 103.00

201
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
8-36 Galvanized sheeting in hearths
troughs, protection sheet behind
stoves, covering to frame & door incl.
edges sleeve pieces curbs to hearths 817.00 1037.00 1258.00 211.00
over wooden cores edges of mangers
etc

202
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
Rate in Taka
HOOP IRON Size of hoop iron supplied & fixed

2.5cmx18G @ 3.12cmx16G @ 3.75cmx16G@

Per metre 0.52 kg/M 0.89 kg/M 1.05 kg/M

8-37 Hoop iron in any position not elsewhere listed

incl. nails punching bending laps etc as required. 42.90 64.00 74.00

Materials &
WIRE AND FENCING ETC Labour
Fixing Only
Add if fixed
RCC Wooden Wooden in repair
Per metre RCC Pillar
Pillar post post
8-38 Barbed wire Galvanized 14
SWG 2 strands 4 point barb at
75 mm apart fixed with staples
nails etc & connect up ends 19.70 20.00 3.60 4.00 3.00
complete

WIRE AND
Supplied & fixed SW gauge
FENCING ETC Add if fixed
Fixing only
in repair
Per metre 16.00 14.00 12.00 10.00 8.00
8-39 Galvanized plain
wire fixed in any 3.70 5.00 7.40 10.00 15.40 1.50 1.00
position

WOVEN WIRE WORK ETC

Materials & Add if fixed

Per Square metre Fixing Only
Labour in repair

8-40 Wire netting iron galvanized 50 mm mesh 16

SWG & fixed with tinned tacks GI staples etc as 213.00 27.10 8.00
required.

8-41 -Ditto-but 37 mm mesh 16 SWG and Ditto. 230.00 31.30 8.00

8-42 -Ditto-but 25 mm mesh 16 SWG and Ditto. 245.00 38.70 8.00

8-43 -Ditto-but 19 mm mesh 16 SWG and Ditto. 265.00 38.70 8.00

8-44 -Ditto-but 12.5 mm mesh 22 SWG and Ditto. 172.80 38.70 8.00

203
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
JOBBING WORK

Per Kilogram Rate in Taka

8-45 Hoisting of steel truss/girder etc in any position 9.00

Supply & Add if fixed

Per Metre Fixing only
fixing in repair
8-46 150 mm dia MS pipe as air breather (Shaped as
required) for water reservoir, over head tank, 4082.00 177.40 44.00
etc.)

Materials & Add if fixed

Fixing only
Labour in repair

8-47 Brass angle as in nosing of stair incl. Hold fast,

making groove and fixed in position all as spd.
Size 38x38x6 mm or 40x40x6 mm 2682.00 479.00 79.80

8-48 - Ditto - but size 50x38x6 mm

3301.00 479.00 79.80

8-49 - Ditto - but size 50x25x6 mm

2958.00 479.00 79.80

8-50 Supply and Fixing of 38x38x5mm size angle

stair iron nosing with 75mm long 38x5mm F.I
bar clamp @ 300 c/c and 25x38x3mm M.S plate
including welding and fixed in position all 805.00 431.00 72.00
complete as spd.

8-51 Supply and Fixing of Nosing iron angle 38 x 38

x 3mm of stair including holdfast, making
groove and fixed in position all as reqd. 652.00 431.00 72.00

8-52 Supply and fixing of 38 x 38 x 3mm size

stainless steel angle nosing of stair (Foreign
made) all complete as required.
1553.00 551.00 92.00

204
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description

WOVEN WIRE WORK ETC. Rate in Taka

Supplied & Add if fixed

Per sq.m Fixing only
fixed in repair
8-53 Wire netting iron galvanized 50 mm mesh 14
SWG and fixed with tinned tacks, GI staples etc.
276.00 35.50 8.00
complete.

8-54 Wire netting iron galvanized 38 mm mesh 14

SWG and fixed with tinned tacks, GI staples etc.
312.00 36.10 8.00
complete.

8-55 Wire netting iron galvanized 25 mm mesh 14

SWG and fixed with tinned tacks, GI staples etc.
342.00 38.70 8.00
complete.

8-56 Wire netting iron galvanized 19 mm mesh 14

SWG and fixed with tinned tacks, GI staples etc. 382.00 38.70 8.00
complete.

PLAIN SHEETING Supplied & fixed Add if fixed

Fixing only
in repair
Per sq.m 20 BG 18 BG
8-57 Galvanized sheeting in walls, floor, 1286.00 1631.00 116.00 29.00
ceiling etc.
Materials & Add if fixed in
Fixing only repair
Labour
8-58 Brass plate / sheet 3 mm thick fixed in wooden /
wall surface or any description incl. Brass screw, 3344.00 2036.00 509.00
rawl plug etc.
Materials & Add if fixed
Per Meter Fixing only
labour in repair
8-59 GI pipe other than National tubes ltd. brand
fixed in any position such as structural work, rain
& waste water line, railing, post, heavy brackets
etc incl. Distance pieces and all connection with 311.00 131.70 33.00
or without welding (welding to be paid
separately if required) 12.50 mm dia.

8-60 -Ditto- but 18.70 mm dia. 369.00 131.70 33.00

8-61 -Ditto- but 25.00 mm dia. 469.00 131.70 33.00

205
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
8-62 -Ditto- but 37.50 mm dia. 696.00 131.70 33.00

8-63 -Ditto- but 50.00 mm dia. 836.00 131.70 33.00

206
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
STAIR HAND RAILS Rate in Taka
Per Metre
Materials & Add if fixed
Fixing only
Labour in repair

8-64 S/F of stainless steel pipe for stair hand rails

50mm dia 2 mm thick including necessary
1667.00 479.00 -
welding / other accessories as required.

8-65 Supply and fixing of stainless steel stair hand

rails 38mm dia 1.5 mm thick including necessary
1406.00 479.00 -
welding / other acessories as required.

8-66 - Ditto - but 25 mm dia 1.5 mm thick 996.00 383.00 -

Making & Add if
Materials
fixing fixed in
& labour
Per sq.m only repair
8-67 Supply and Fixing of 25mm dia 2mm thick
stainless steel pipe railing 19mm dia 2mm thick
vertical post and middle pipe including cutting, 3573.00 794.00 516.00
shaping, welding, polishing as required.

8-68 Supply and Fixing of Stainless steel pipe Stair

Railing made 2 mm thick of 50mm dia at top
Hand Rail, 38mm diax2mm thick vertical post
and 25 mm diax2mm thick middle pipe all as per 6364.00 899.00 225.00
drawing including welding, polishing etc.
complete all as spd.

8-69 Supply, fitting , fixing of stainless steel pipe

Railing 38mm dia x 1.5 mm thick vertical post &
19mm dia x 2 mm thick Horizontal middle pipe
and 50mm dia x 2 mm thick Hand rail including 7129.00 973.00 243.00
cutting, SS welding, bending, granding etc. all
complete as required.

8-70 Supply and fixing of aluminium box railing

complete with all fittings any colour as spd. 1210.00 405.00 70.00

Each

207
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
8-71 Supply and Fixing of 25mm dia stainless steel
Ball / Bottom anchor plate / Top cap / U-cap etc
all complete. 194.00 74.00 19.00

8-72 - Ditto - but 38 mm 257.00 74.00 19.00

8-73 - Ditto - but 50 mm 367.00 107.00 27.00

New Item
Item
STEEL REINFORCEMENT Rate in Taka

Supplied &
Per kg Except bars
Fixed

8-32(A)
Bars round square or flat including binding & placing
reinforcement in position-but using deformed bars, yield 92.00 10.00
strength BDS grade 500 (72500 PSI/517.10 Nmm²)

WIRE AND
Rate in Taka
FENCING ETC
Materials &
Fixing Only
Labour Add if fixed
Unit Per metre in repair
Angle post Angle post

8-38 (A) Barbed wire Galvanised 14 SWG 2

strands 4 point bard at 75 mm apart
fixed with staples rails etc & connect 20.00 4.00 3.00
up ends complete

Steel Structure Frame Rate in Taka

Supplied &
Per kg Except bars
Fixed
8-39(A) Supply and fixing steel structure frame such as joist of
various size with base plate and Gusset plate of 6 mm thick
using nut bolts and necessary fittings etc complete as 155.00 28.00
specified.

Supplied &
Per kg Except bars
Fixed
8-39(B) Supply and fixing steel structure frame with U Channel of
various size as a rafter king post, struts etc complete with J
hooks and all as specified. 143.00 54.66

208
RESTRICTED
 RESTRICTED
SECTION-8
STEEL AND IRON WORKS RATES

Item Description
Supplied &
Per kg Except bars
Fixed
8-39(C) Supply and fixing steel Structure frame but using L / Angle
bar as a purlin with washer gasket etc complete all as
specified. 134.00 29.94

Supplied &
Per Square metre Except bars
Fixed
8-39(D) Supply Fixing of 25x25x2mm thick Stainless steel
angle/box/pipe railing with 19x19x1.5 mm and 19mm dia
6685.00 1337.00
1.2mm thick SS pipe complete as spd. (For Bar. Railing)

SS
Per metre
Welding
8-16A Analysis for Stainless steel welding 718.00

209
RESTRICTED
 RESTRICTED
SECTION-9
ROOF COVERING FELT AND BUILDING
PAPERS ETC.- RATES
Item Description

SHEET ROOFS Rate in Taka

Supplied & fixed
Per square metre gauge 26 Except Sheet
BG/.46mm
9-1 Corrugated steel sheeting fixed to timber framing or
purlin with one & a half corrugation side laps &
15cm end laps fixed with screws fibre & galvanized 1103.00 115.40
curved or limpet washers at centre not exc 38 cm

9-2 - Ditto - but without end laps 1066.00 115.00

9-3 - Ditto - fixed to timber/steel framing or purlin with
one & a half corrugation side lap 15 cm end lap fixed
with 9.60 mm dia 'J' bolts at centre not exceeding 38 1206.00 218.00
cm

9-4 - Ditto - but without end laps 1169.00 218.00

SHEET ROOFS

Per metre Except Sheet

9-5 Extra for riveting or bolting side laps any gauge at 23 cm centres. 38.00

9-6 Extra for riveting or bolting end laps each corrugation 103.00
Rate in Taka
Supplied & fixed
gauge 26 Except Sheet
Per square metre BG/.46mm

9-7 Plain steel sheeting in ridges, hips, valleys & straight

& stepped flashing roof plates & sleeve pieces etc. 823.00 217.00

Rate in Taka
Supplied & fixed gauge Except

Per square metre 20 BG 18 BG Sheet

9-8 Galvanized Plain steel sheeting in gutters
etc. with round edges, any pattern fixed
with flat iron straps, spaced n.exc 1 metre
1468.00 1813.00 298.00
apart incl. angles, outlets, stop ends etc
(straps if any to be paid separately)

Sheet fixed with

209
RESTRICTED
 RESTRICTED
SECTION-9
ROOF COVERING FELT AND BUILDING
PAPERS ETC.- RATES
Item Description

Hook / 'J'
Screws
bolts
9-9 Dismantling corrugated sheets for repair & refixing
the same with 'J' bolts/screws. 165.20 232.00

210
RESTRICTED
 RESTRICTED
SECTION-9
ROOF COVERING FELT AND BUILDING
PAPERS ETC.- RATES
Item Description
Rate in Taka
COLOUR SHEET ROOFS
Materials Except sheet Add if fixed in
Per square metre
& Labour ridges repair
9-10 Corrugated colour sheet 26 BG of any
approved make & fixed with screws, hook
bolts 'J' bolts nuts, GI limpet washers &
fibre washers as required in any position 1255.00 153.50 38.00
with proper side and end lap.

9-11 -Ditto-but without end laps. 1005.00 153.50 38.00

9-12 Asbestos cement two pieces ridging
separated or close fitting of any approved
2927.00 203.60 103.00
make.

Rate in Taka
FELT WORK
Per square metre 1 Ply 2 Ply
9-13 Felt bituminous in flashing & concrete/brick work
joint, joints wedged & tucked in, side & end joints
861.00 1060.00
struck with approved bituminous adhesive

BITUMEN COATING
Per square metre Rate in Taka
9-14 One coat of bitumen applied hot on roof at the rate
of 7 kg per 10 sq.m & blinding with sand 1.00 FM at
the rate of 0.122 cubic meter per 10 sq.m (incl. 97.00
clearing of surfaces)
9-15 Two coat of bitumen applied hot on roof at the rate
of 11 kg per 10 sq.m & blinding with sand 1.00 FM
138.00
at the rate of 0.122 cubic meter per 10 sq.m (incl.
clearing of surfaces)
Rate in Taka

Corrugated fibre sheet Except sheet

TRANSPARENT SHEET ROOFS

Per square metre Tin screw J' hook Tin screw J' hook

211
RESTRICTED
 RESTRICTED
SECTION-9
ROOF COVERING FELT AND BUILDING
PAPERS ETC.- RATES
Item Description
9-16 Corrugated transparent fibre
sheet 1.50 to 2.00 mm thick
fixed with timber or steel
framing with one and half
corrugation side laps and 15 cm 1666.00 1802.00 564.00 578.00
end laps fixed with screw, 'J'
hook, fibre and galvanized
curved or limpet washers at
centres not exc 38 cm

212
RESTRICTED
 RESTRICTED
SECTION-9
ROOF COVERING FELT AND BUILDING
PAPERS ETC.- RATES
Item Description

New Item
Item Description
SHEET ROOFS Rate in Taka
Supplied &
Per Square metre fixed gauge Except Sheet
0.42mm
9-1 (A) Corrugated steel sheeting fixed to timber
framing or purlin with one & a half
corrugation side laps & 15cm end laps fixed
with screws fiber & galvanized curved or 1020.00 115.00
limpet washers at centres not exc 38 cm

9-2(A) -Ditto-but without end laps

982.00 115.00
9-3(A) Ditto-fixed to timber/steel framing or
purlin with one & a half corrugation side
lap 15 cm end lap fixed with 6.0 mm dia 1204.00 216.00
'J' bolts at centres not exceeding 38 cm

9-4(A) -Ditto-but without end laps

1167.00 216.00

New Item
Item Description
Rate in Taka
Material &
Per Square metre Fixing only
Labour
9-17 Supply and fixing of 0.47 mm thick zink
allum Sheet of approved brand fixed
with screw, hook/j bolts, nut, washer etc 1496.00 167.64
as specified.

9-18 Supply and fixing of double layer

insulation bubble (5mm thick) fixed with
screw, hook/j bolts, nut, washer etc of 356.00 59.87
approved brand as specified.

213
RESTRICTED
 RESTRICTED
SECTION-10

BAMBOO AND MATTING WORK RATES

Item Description Rate in Taka

BAMBOO SUPPORTS ETC Girth in Millimetre

Per metre 200.00 250.00 300.00

10-1 Single whole borak bamboo including oiling 132.00 131.00 180.00

Rate in Taka

Girth in Millimetre

150-200 250.00 300.00

10-2 Single whole mooli bamboo including oiling

(150 to 200 mm girth) 99.00 - -

Rate in Taka

Per Square metre Single Layer Double Layer

10-3 Chatai matting fixed in roofs, walls etc complete with

all accessories incl. lapping. 114.70 166.00

10-4 Tarja matting fixed in roofs, walls etc complete with

all accessories including lapping inter woven, double - 212.40
layer.
10-5 Add if matting is secured to frame with split bamboo
22 cm centre to centre both side both ways & secured
with binding wire - 91.00

214
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Rate in Taka

FLOORS Laid jointed & pointed in Cement Mortar

Laid &
jointed Materials & Except Materials & Except
with Labour Cement Labour Cement
sand

Per Square metre 1:4 1:6

11-1 Burnt brick laid flat in floors, 426.00 404.00 423.00 404.00
channels etc.

11-2 -Ditto-but laid on edge 621.00 698.00 669.00 695.00 668.00

DPC UNDER FLOOR Rate in Taka

Per Square metre Materials & Labour

11-3 19mm thick (consolidated) bitumen premix carpeting as

DPC under floor using shingle 0.012 cu.m & sand 0.012
cu.m with 1.34 kg hot bitumen for shingle and 0.77 kg hot 477.00
bitumen for sand & 0.73 kg bitumen for tack coat, as
specified for 1 sq.m (using shingles)
Rate in Taka
Concrete Mix

Materials Except Materials Except Materials & Except Materials & Except
FLOORS & Labour Cement & Labour Cement Labour Cement Labour Cement

Per Square metre 1:6:12 1:4:8 1:3:6 1:2:4

11-4 Cement concrete

150mm thick laid
under floor & 897.00 759.00 960.00 757.00 1019.00 748.00 1190.00 778.00

plinth protection
11-5 Cement concrete
100 mm thick
laid under floor 624.00 532.00 664.00 528.00 713.00 532.00 816.00 541.00
& plinth
protection
11-6 Cement concrete
75mm thick laid
under floor & 486.00 417.00 517.00 415.00 554.00 418.00 636.00 430.00
plinth protection

219
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Concrete Mix

Materials & Except Materials & Except

FLOORS Labour Cement Labour Cement

Per Square metre 1:3:6 1:2:4

11-7 Cement concrete floor 38mm thick using coarse

aggregate as specified 307.00 239.20 345.00 242.00

11-8 Cement concrete floor 29mm thick using coarse

aggregate 12mm graded as specified
237.00 186.00 265.00 188.00

11-9 Cement concrete floor 25mm thick using coarse

aggregate 12 mm graded as specified
201.00 156.00 227.00 158.00

CEMENT FINISH Rate in Taka

Per Square metre Materials & Labour Except Cement

11-10 Neat cement finishing to floor slab/plinth

protection & the like, finished smooth with trowel 102.00 78.00
or as directed.

SAND CUSHION

Per Cubic metre Rate in Taka

11-11 Sand cushion as under floor using sand 0.80 F.M 724.00

HARD WEARING SURFACES Rate in Taka

Per Square metre Materials & Labour Except Cement

11-12 Stonolithic (1:1.5) 12 mm thick spread over

ordinary concrete floors etc incl. rubbing with
693.00 596.00
carborandum blocks as specified

11-13 Stonolithic layer 12 mm thick (1:1.5) spread over

concrete stairs incl. rubbing as specified 781.00 684.00

220
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
11-14 Stonolithic (1:1.5) as in dados, skirting 12 mm
thick incl. casings, mitres, returned ends &
tucking in top edge or fair upper edges where 801.00 666.00
walls are plastered incl. 6mm thick cm (1:3) base.

221
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Rate in Taka

MOSAIC WORK (SITU) In floor In dados skirting

Except grey Materials &

Per Square metre Materials & Labour
cement Labour
Except grey cement

11-15 6mm thick finished silver grey

mosaic (1:1) i.e one part of
cement (grey & white in
proportion 1:1) & one part of 3
mm size marble chips (imported)
black & white in proportion (1:6) 1342.00 1304.00 1467.00 1391.00
or only 3mm size white marble
chips incl. cutting & polishing
with Pumice stone/Carborandum
stone & finishing with oxalic
acid.

11-16 -Ditto-but using grey cement only 1227.00 1151.00 1345.00 1232.00

Rate in Taka

In floor In dados skirting

Materials & Materials & Except grey

Labour Labour cement

11-17 -Ditto-but using white cement only 1457.00 1575.00 1537.00

In floor In dados skirting

Materials & Except grey Materials & Except grey

Labour cement Labour cement

11-18 6mm thick finished silver grey mosaic

(1:1) i.e one part of cement (grey & white
in proportion 1:1) & one part of 3 mm
size marble chips (imported) multi
coloured & white in proportion (1:3) ###### 1299.00 1455.00 1379.00
incl. cutting & polishing with Pumice
stone/Carborandum stone & finishing
with oxalic acid.

11-19 -Ditto- but using grey cement only ###### 1146.00 1340.00 1226.00

In floor In dados skirting

222
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Materials & Materials & Except grey

Labour Labour cement

11-20 -Ditto-but using white cement only 1452.00 1570.00 1532.00

223
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

MOSAIC WORK (SITU) In floor In dados skirting

Materials & Except grey Materials & Except grey

Per Square metre Labour cement Labour cement

11-21 9mm thick finished silver grey mosaic

(1:1) i.e one part of cement (grey & white
in proportion 1:1) & one part of 6 mm
size marble chips (imported) black &
white in proportion (1:6) incl. or only 6 ###### 1435.00 1604.00 1515.00
mm size white marble chips incl.
polishing with Pumice stone /
Carborandum stone & finishing with
oxalic acid.

11-22 -Ditto-but using grey cement only ###### 1227.00 1448.00 1307.00

In floor In dados skirting

Materials & Materials & Except grey

Labour Labour cement

11-23 -Ditto-but using white cement only 1642.00 1748.00 1710.00

In floor In dados skirting

Materials & Except grey Materials & Except grey

Per Square metre Labour cement Labour cement

11-24 9mm thick finished silver grey situ

mosaic (1:1) i.e one part of cement (grey
& white in proportion 1:1) & one part of
6 mm size marble chips (imported) multi
coloured & white in proportion (1:3) ###### 1428.00 1597.00 1508.00
incl. cutting & polishing with Pumice
stone/Carborandum stone & finishing
with oxalic acid.

11-25 -Ditto-using grey cement only ###### 1220.00 1441.00 1300.00

In floor In dados skirting

Materials & Materials & Except grey

Labour Labour cement

11-26 -Ditto-but using white cement only 1635.00 1754.00 1716.00

224
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Rate in Taka

MOSAIC WORK (SITU) In floor In dados skirting

Materials & Except grey Materials & Except grey

Per Square metre Labour cement Labour cement

11-27 Silver grey mosaic tiles 200mm x

200mm x 19mm flooring with 6mm thick
finished mosaic top (1:1)incl one part of
cement (grey & white in proportion (1:1)
& one part of 3 mm size marble chips
(imported) black & white in
proportion(1:6) or only 3mm size white
marble chips machine pressed on cement ###### 2266.00 0.00 0.00
mortar base (1:4) incl. preparing base ,
setting tiles in cement slurry & lime
mortar (lime unslaked & surki) (1:3) incl.
cutting & polishing with Pumice
stone/Carborandum stone & finishing
with oxalic acid.

11-28 -Ditto-but using grey cement only ###### 2135.00 0.00 0.00

11-29 -Ditto-but using white cement only ###### 2441.00 0.00 0.00
11-30 Silver grey mosaic tiles 200mm x
200mm x 19mm flooring with 6mm thick
finished mosaic top (1:1)incl one part of
cement (grey & white in proportion (1:1)
& & one part of 3 mm size marble chips
(imported) multi coloured & white in
proportion (1:3) incl. preparing base
###### 2283.00 0.00 0.00
setting tiles in cement slurry & lime un
slaked & surki (1:3) incl. cutting &
polishing with Pumice
stone/Carborandum stone & finishing
with oxalic acid.

11-31 -Ditto-but using grey cement only ###### 2121.00 0.00 0.00

11-32 -Ditto-but using white cement only ###### 2433.00 0.00 0.00

225
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Rate in Taka

MOSAIC WORK (SITU) In floor In dados skirting

Materials & Except grey Materials & Except grey

Per Square metre Labour cement Labour cement

11-33 Silver grey mosaic tiles (200mm x

200mm x 19mm) flooring with 9mm
thick finished mosaic top (1:1)incl one
part of cement (grey & white in
proportion (1:1) & one part of 6 mm size
marble chips (imported) black & white in
proportion(1:6) or only 6mm size white
marble chips machine pressed on cement ###### 2419.00 0.00 0.00
mortar base (1:2) incl. preparing base ,
setting tiles in cement slurry & lime
mortar (lime unslaked & surki) (1:3) incl.
cutting & polishing with Pumice
stone/Carborandum stone & finishing
with oxalic acid.

11-34 -Ditto-but using grey cement only ###### 2202.00 0.00 0.00

11-35 -Ditto-but using white cement only ###### 2622.00 0.00 0.00
TILE WORK Rate in Taka
Per Square metre Plain Design
11-36 White glazed tiles in walls (Fu-wang / China-Bangla) plain /
design size 200x300 mm incl. angle coves, coping, corner,
bends etc set on cement mortar base (1:2) & joint grouted 1866.00 1866.00
with white cement complete as specified (measured flat)

Luxury Luxury
luster Roto
colour colour
11-37 White glazed tiles in walls (Fu-wang / China-Bangla) luxury
luster / roto colour size 200x300 mm incl. angle coves,
coping, corner, bends etc set on cement mortar base (1:2) & 1887.00 1873.00
joint grouted with white cement complete as specified
(measured flat)
SIZE
200x300 250x330
mm mm

226
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
11-38 Ceramic glazed tiles in walls (RAK) incl. angle coves,
coping, corner, bends etc set on cement mortar base (1:2) &
joint grouted with white cement complete as specified 1763.00 1902.00
(measured flat)

227
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Size
250x400 200x300
mm mm
11-39
Ceramic glazed tiles in walls (MIR/Madhumati) colour /
printed incl. angle coves, coping, corner, bends etc set on
1897.00 1748.00
cement mortar base (1:2) & joint grouted with white cement
complete as specified (measured flat)

Rate in Taka
TILE WORK Brand Fu-wang and size of tiles
Special Luxury Luxury
Luxury
design polished special
Per Square metre 310x450
200x300 310x450 250x360
mm
mm mm mm
11-40 Ceramic glazed tiles in wall (Fu-wang /
China-Bangla) design / special design /
luxury / luxury special as spd incl. angles,
coves, coping, corner bends etc set on
###### 1930.00 1958.00 1930.00
cement mortar base (1:2) & joint grouted
with coloured cement complete all as
specified (measured flat)

RAK
11-41 Glazed tiles design over colour base in White White
wall incl. angles, coves, coping, corner Red body Matt body body
bends etc set on cement mortar base (1:2) 305x510 250x400 squaring squaring
& joint grouted with coloured cement mm mm 300x600 305x510
mm mm
complete all as specified (measured flat)
###### 2265.00 2054.00 1873.00

Rate in Taka
11-42 Ceramic glazed tiles wall Fu-wang Exterior 65x200 mm set
on cement base (1:2) & joint grouted with white cement
complete all as specified incl angles, coves, coping, corner, 1723.00
bend etc (measured flat).

GLASS STRIPS

Per metre
11-43 Glass strip 5mm thick provided & embedded in Mosaic /
Terrazzo floors (19mm in depth) 72.00

11-44 -Ditto-but 3 mm thick 63.00

POINTING Laid on Edge Laid Flat

228
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Materials & Except Materials & Except

Per Square metre Labour Cement Labour Cement

11-45 Pointing flush to old or new brick floors

built in cm (1:3) 73.10 62.00 51.80 43.00

229
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

FLOORS PAVING
Materials & Except
Per Square metre Labour Cement
11-46 Ceramic solid brick laid flat in floor / walkway paving etc
laid, jointed and pointing in cement 1:4 (200x100x50 mm 1592.00 1519.00
size)
11-47 -Ditto-but laid on edge 3007.00 2902.00
Coloured / Special
Per Square metre printed size design size
310x310 mm 310x310 mm

11-48 Printed / designed / coloured floor tiles (Fu-wang / China-

Bangla) or equivalent) in floor set on 19mm cement mortar
base (1:4) and joint grouted with coloured cement complete 1439.00 1416.00
all as spd (Measured flat)
Matt size Matt size
316x316 mm 400x400 mm

11-49 Ceramic glazed tiles floor (RAK or equivalent) in floor set

on 19mm cement mortar base (1:4) and joint grouted with
white / coloured cement complete (measured flat) of 1552.00 1413.00
approved quality and design.

Materials & Add if fixed

Fixing only
Labour in repair

11-49A Linoleum sheet as in floor or in any other position

fixed with glue (Foreign made) as spd. 777.00 119.70 30.00

Materials & Except

labour Cement

11-50 75 mm thick brick bonded concrete (1:2:4) using brick

aggregate as in floor, car-parking or in any other position 711.00 646.00
as spd.
Foreign
Foreign china other than
china
11-51 Coloured glazed tiles (Foreign made) in walls incl angles,
coves, coping, corner, bends etc set on 19mm cement
mortar base (1:4) and joint grouted with coloured cement 2082.00 2131.00
complete (Measured flat)
Rate in Tk
11-52 Coloured tiles (foreign made non-slide any size) in floor
incl angle, coves, coping, corner, bends etc set on cement
mortar base (1:4) and joint grouted with coloured cement 3070.00
complete (measured flat)

230
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
11-52A Supply and fixing of Granite 12 mm thick foreign made as
in floor / wall including angle, cover, coping, corner, bends
etc set on cement mortar base (1:4) and joint grouted with 10365.00
colour cement complete as spd.

231
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
Rate in Taka
MARBLE SLAB 19 mm thick stone 12 mm thick stone

Materials & Except Grey Materials & Except Grey

Per Square metre Labour cement Labour cement

11-53 Marble stone as in floor on cement

mortar (1:4) and joint grouted with white 12584.00 ####### ####### ######
cement complete (Foreign made)

FLOORS PAVING Colour

Klinker
Per Square metre Black Jet Beige Apricot
Red
11-54 Hexagonal ceramic Tiles (Mirpur
ceramic made / equivalent) laid in floor /
walk way paving etc. set on cement
mortar base (1:4) and joint grouted with ###### 4349.00 3372.00 3861.00
cement complete all as spd. measured flat
(Clay paves, CT-10, size 230/150/80/25
mm, Hexagon)

11-55 Hexagonal ceramic Tiles (Mirpur

ceramic made / equivalent) laid in floor /
walk way paving etc. set on cement
mortar base (1:4) and joint grouted with
###### 2867.00 3054.00 3054.00
cement complete all as spd. measured flat
(Clay paves, CT-12, size 300/90/210/25
mm, Hexagon)

DIFFERENT TYPES TILES Rate in Taka

special
300x300
Per Square metre 300x30
mm
0 mm
11-56 Supply & fixing of ceramic glazed tiles floor (MIR) set on
cement morter base (1:4) and joint grouted with white
1417.00 1722.00
cement as in floor.

316x316 400x40
mm 0 mm
11-57 Supply & fixing coloured ceramic glazed tiles floor
(Madhumati) set on cement morter base (1:4) and joint
1688.00 1731.00
grouted with coloured cement as spd.

232
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
code GP,
7GP, other
173GP, codes
173UP
11-58 Supply & fixing ceramic glazed coloured tiles floor (RAK)
set on cement morter base (1:4) and joint grouted with 1912.00 1682.00
coloured cement as spd size 400x400 mm.

310x310 420x42
mm 0 mm
11-59 Supply & fixing ceramic glazed coloured tiles floor (Fu-
wang luxury) set on cement morter base (1:4) and joint
grouted with coloured cement as spd size. 1413.00 1703.00

Special
400x40
300x300
0 mm
mm
11-59A Supply & fixing ceramic glazed coloured tiles floor
homogeneous matalic (MIR) set on cement morter base
1449.00 1849.00
(1:4) and joint grouted with coloured cement as spd size.

DIFFERENT TYPES TILES Rate in Taka

305x305 400x40
Per Square metre
mm 0 mm
11-60 Supply & fixing ceramic glazed homogeneous mettalic /
coloured tiles floor (RAK) set on cement morter base (1:4)
and joint grouted with coloured cement as spd. 1849.00 1790.00

304x304 400x40
mm 0 mm
11-60A Supply & fixing ceramic glazed homogeneous any colour
tiles floor (ATI) set on cement morter base (1:4) and joint
grouted with coloured cement as spd. 1698.00 1638.00

11-60B Supply & fixing ceramic glazed homogeneous mono

colour tiles floor (ATI) set on cement morter base (1:4) and
1534.00
joint grouted with coloured cement as spd any size

11-61 Supply & fixing ceramic glazed homogeneous mirror polish

tiles floor (RAK) set on cement morter base (1:4) and joint
2048.00
grouted with coloured cement as spd size 595x595 mm.

233
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

DIFFERENT TYPES TILES Rate in Taka

Per Square metre
11-62 Supply & fixing ceramic glazed homogeneous tiles floor G-
4400 GL (MIR) set on cement morter base (1:4) and joint
grouted with coloured cement as spd size 400x400 mm. 2291.00

11-63 Supply & fixing ceramic glazed homogeneous mirror polish

tiles floor (MIR) set on cement morter base (1:4) and joint
grouted with coloured cement as spd size 400x400 mm. 2016.00

11-64 Supply & fixing ceramic glazed homogeneous mirror polish

tiles floor (RAK) set on cement morter base (1:4) and joint
grouted with coloured cement as spd size GP 400x400 mm. 2048.00

DIFFERENT TYPES TILES Rate in Taka

Per Square metre
11-65 Supply & fixing ceramic glazed homogeneous mirror polish
tiles floor (MIR) set on cement morter base (1:4) and joint
grouted with coloured cement as spd code G-4400GL size 2291.00
400x400 mm.

11-65A Supply & fixing ceramic glazed homogeneous mirror polish

tiles floor (Foreign made) set on cement morter base (1:4)
and joint grouted with coloured cement as spd size 3883.00
600x600 mm.

11-66 Supply & fixing ceramic glazed tiles floor (Fu-wang/China-

Bangla/Mir) set on cement morter base (1:4) and joint 1968.00
grouted with coloured cement as spd code size 310x310
mm.
11-67 Supply & fixing of homogeneous parquet sheet floor tiles
(like wood) alder type using double layer polythene and 12367.00
silicon gum including cutting, pasting in position as spd.

11-68 Supply & fixing ceramic glazed tiles stair (Fu-wang/China-

Bangla) set on cement morter base (1:4) and joint grouted 1760.00
with coloured cement as spd code size 260x300 mm.

11-69 Supply & fixing ceramic glazed tiles stair bull nose (RAK)
set on cement morter base (1:4) and joint grouted with 1744.00
coloured cement as spd code size 305x305 mm.

234
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
11-70 Supply & fixing ceramic glazed tiles stair group (RAK) set
on cement morter base (1:4) and joint grouted with 1830.00
coloured cement as spd code size 305x305 mm.

11-71 Supply & fixing special design concord tiles 38 mm thick

set on cement morter base (1:4) and joint grouted with 2710.00
coloured cement as spd.

235
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
ADDITIONAL COST FOR LIFTING Rate in Taka
Per Square metre
11-72 Additional cost per floor for Cement concrete floor laying
(any thickness) from 1st floor to 5th floor. 38.30

11-73 Additional cost per floor for Cement concrete floor laying
(any thickness) from 6th floor to 9th floor. 47.90

11-74 Additional cost per floor for Cement concrete floor laying
(any thickness) from 10th floor and above. 62.00

11-75 Additional cost per floor for Mosaic / Tiles / Marble laying
(any thickness) from 1st floor to 5th floor. 14.00

11-76 Additional cost per floor for Mosaic / Tiles / Marble laying
(any thickness) from 6th floor to 9th floor. 23.90

11-77 Additional cost per floor for Mosaic / Tiles / Marble laying
(any thickness) from 10th floor and above. 38.00

New Item
FLOORS Rate in Taka
Per Square metre Materials & Labour Except Cement

1:2:4

11-6A Cement concrete 50mm thick laid under floor &

plinth protection 447.00 305.00

FLOORS PAVING

Per Square metre Rate in Taka

11-52B Supply and fixing of Granite 19 mm thick foreign made as
in floor / wall including angle, cover, coping, corner, bends
etc set on 19mm cement mortar base (1:4) and joint grouted 16011.00
with colour cement complete as spd.

TILE WORK
Per Square metre
Rate in Taka
11-78 For used admixture (TJF) tile joint filter to tile joint in wall/floor
as per instruction of conmix manufacturer as spd. 54.00

TILE WORK
Per Cu.m Rate in Taka

236
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
11-79 For used admixture (Tekni floor plus) of conmixet Product for
RCC/PCC (heavy traffie) in workshop, wire house and car 513.00
parking as spd.

237
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Per S.q m Rate in Taka

11-80 Supply & fixing of 300 x 300 mm size of Pavement tiles of
approved brand uing CM(1:2) with 50% Sylhet sand & 50% local
765.00
sand & all as spd.

Per S.q m Rate in Taka

11-81 Supply & fixture of parking (300 x 300 mm) tiles for heavy
vehicle in CM (1:1) with 100% Sylhet sand of FM 2.5 and all as 1017.00
spd.
Labour
Per Square metre Plain
only
11-78
Supply and fixing of walls tiles glaze/matt, graphic of 200x300
mm sixe jointed in CM(1:2) of star ceramic limited products ( 1479.00 803.00
Code no 2300 WH, 2306 BE, 2310 BR and 2358 DBR)

TILE WORK Rate in Taka

Labour
Per Square metre Plain
only
11-79 Supply and fixing of glazed floor tiles 305x305 mm size set in
CM (1:2) as in floor of Star Ceramic ltd products code No-GPG-
3300WH, GPG-3304WH, 33005LBE, 33006 LBL, GPG-33009
1674.00 731.00
DBR, 33018 BE, 33051 DBE, 33204 LGR, 33208 WH, 33210
DRG, 33212 LBE and 33407 BE.

Materials Fixing
Per Square metre
& Labour only
11-80 Supply and fixing of Star Graphic 200x500 mm size wall tiles set
in CM (1:2) and all specified of Star Ceramics Ltd . Code no-
1863.00 736.00
255704 PK, 25712 SGBE and 25714 SGGY .

Material Fixing
Item Per sq.m & Labour only
11-81 Supply & fixing of floor tiles glazed homogenius 400 X 400 mm
size set in CM (1:2) as spd of Star Ceramics Ltd code no GPG-
44000WH, GPG-44000YE, GPG- 4405IV, GPG-44025 BL, 1,604.00
GPG-44040GYPE and PG-44404 WBE.

599

Material Fixing
Per sq.m & Labour only

238
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description
11-82 Supply & fixing of Homogeneous glazed tiles floor
(Star Ceramics Ltd) set in CM (1:2) 400X400 mm size.
Code No GPG-44610BR all as spd. 2,040.00

599

239
RESTRICTED
 RESTRICTED
SECTION-11
FLOORS AND WALL TILING RATES
Item Description

Rate in Taka

Per sq.m
400x400 mm
Supply & fixing of unglazed/ glazed tiles floor
11-83
homogeneous 600x600 mm (Star Ceramics) set on
19mm cement mortar base (1:4) and joint grouted with
1746
white cement as in floor.(code no-66656 MT LBR)
Rate in Taka
Per sq.m 600x600 mm
11-84 Supply & fixing of polished tiles classic crystal Set in CM (1:2)
of Star ceramics product all spd. Code 66000 GPCC, 66314
2244.00
GPCC -GY, 66320 GPCC-IV, 66319 GPCC WH, 66332 GPCC -
LBR, 66326 GPCC JWBR and 66337 GPCC-IV.

Per sq.m Rate in Taka

11-85
Supply & fixing of Decors tiles (Embosed) size 324x494 mm set
1,525.00 150.00
in CM (1:2) of Star ceramics products with and all as spd.

Rate in Taka

Material
Fixing only
& Labour
Per sq.m
11-86
S/F border tiles (Printed) size 77x500 mm set in cm
200.00 27.00
(1:2) of Star Ceramic Ltd product all as spd.

11-87 Supply & fixing of Nano Crystal polished tiles size

600x600mm of Star ceramics product and all as spd. 2,328.00 636.00

11-88 Supply & fixing of Nano Crystal polished tiles size

600x1200mm of Star ceramics product and all as spd. 4,071.00 669.00

11-89 Supply & fixing of mirror polish homogenous floor

size 600x600mm forign made set with Nova brand
pesting cement and jointed with coloured cement.
3,123.00 636.00
Code no.HPP-16001, China made.

240
RESTRICTED
 RESTRICTED
SECTION-12
PLASTERING RATES

Item Description

Rate in Taka

Cement Mortar

CEMENT PLASTER 1:3 1:4 1:6

Materials & Except Materials Except Materials Except

Per Square metre Labour Cement & Labour Cement & Labour Cement

12-1 12mm thick cement plaster

finished as specified (Ground
173.00 93.00 157.00 94.00 139.00 94.00
floor)

12-2 19mm thick cement plaster

finished as specified 254.00 140.00 230.00 140.00 205.00 142.00

Rate in Taka
Mortar Mix

1:3 1:4
Materials Except Materials Except
& Labour Cement & Labour Cement

12-3 Add to item 12-1 for pudlo or other similar

approved materials mixed with cement at the rate of 133.00 0.00 106.00 0.00
2.5% by weight of cement as specified.

12-3(A) Add to item 12-1 for Foam lub of Boral Chemical

Co. ltd (BCCL) or other similar approved materials
mixed with cement at the rate of 0.70% by weight 19.20 0.00 15.10 0.00
of cement as specified.

12-4 Add to item 12-2 for pudlo or other similar

approved materials mixed with cement at the rate of
191.00 0.00 151.00 0.00
2.5% by weight of cement as specified.

12-4(A) Add to item 12-2 for Foom lub of Baral Chemical Co. ltd
(BCCL) or other similar approved materials mixed with
cement at the rate of 0.70% by weight of cement as 27.30 0.00 21.50 0.00
specified.
Rate in Taka
Mortar Mix
1:4
Materials Except
& Labour Cement

6mm thick cement plaster (1:4) on RCC faces as specified

12-5 176.00 140.00
(Ground floor)

235
RESTRICTED
 RESTRICTED
SECTION-12
PLASTERING RATES

Item Description

12-6 6mm thick cement plaster (1:4) on top of wall as specified 124.00 92.00

12-7 Add to item 12-1 & 12-2 for neat cement finishing
where applicable. 83.00 70.00

236
RESTRICTED
 RESTRICTED
SECTION-12
PLASTERING RATES

Item Description
SCRAPING PLASTER Rate in Taka
Lime Cement
Per Square metre Mortar Mortar

12-8 Hacking lime or cement plaster on walls, lathing &

raking out joints when required or raking lime or
cement jointing to walls, roofs or floor of any
29.90 47.90
description or hacking concrete to form key or
dismantling lathing with or without plaster.

Rate in Taka
12-9 Scraping mud Plaster of any thickness. 9.00
Rate in Taka
FILLETING Width of fillets in mm

Exc. 75.0
Exc. 37.5
Per metre N.exc 75.0
N. exc
150.0

12-10 Filleting upon 50mm deep in any position in cement

mortar (1:3) 84.00 105.00

12-11 - Ditto - but except cement 76.00 88.00

Rate in Taka
12-12 25 mm deep and 50 mm wide grooved cement plaster 194.00
with CM (1:3)

12-13 - Ditto - but except cement 190.00

LETTERING
Each Rate in Taka
12-14 Forming 'V' grooves 12.5mm wide & 18.7 mm deep in
new plaster as form letters or figures up to 100mm
75.00
height as specified.

ADDITIONAL LIFT FOR CEMENT PLASTER

Per Square metre Rate in Taka
12-15 Add to item 12-1 for each additional floor from 1st upto 5th 11.00
floor
12-16 Add to item 12-1 for each additional floor from 6th to 9th floor 14.00

12-17 Add to item 12-1 for each additional floor from 10th to above 17.00

237
RESTRICTED
 RESTRICTED
SECTION-12
PLASTERING RATES

Item Description
12-18 Add to item 12-5 for each additional floor from 1st upto 5th 13.00
floor
12-19 Add to item 12-5 for each additional floor from 6th upto 9th 20.00
floor
12-20 Add to item 12-5 for each additional floor from 10th to above 27.00

Rate in Taka

Mortar Mix

CEMENT PLASTER 1:3 1:4

Materials Except Materials Except
Per Square metre & Labour Cement & Labour Cement

12-21 Add to item 12-2 for foam lub (BCCL/Conmix

Ltd) or other similar approved materials mixed
with cement at the rate of 0.70% by weight of 27.30 0.00 21.50 0.00
cement as specified.

CEMENT PLASTER

Per Square metre Rate in Taka

12-22 Add Admixture for 12mm thick cement plaster
(1:3) to prevent damp (Mega flow P4) of
conmix product and all as spd. 185.60

12-23 Add Admixture for 19mm thick cement plaster

(1:3) to prevent leakage of water tank,
192.00
reservour & septic tank use `Jet Cur GP' of
conmix product as spd.

238
RESTRICTED
 RESTRICTED
SECTION-13
CEILING AND WALL BOARD ETC RATES
Item Description

HARD BOARD & PARTEX BOARD PARTITION &

Rate in Taka
CEILING ETC
Add if fixed
Supplied & Except in
Per Square metre Fixed Sheets repair/remov
al

13-1 Hard board sheet 3mm thick in ceiling &

partitions fixed to frame with screws
(Timber to be paid separately under relevant 506.00 312.00 78.00
item)
13-2 Partex board 12mm thick of 400 density in
ceiling & partitions fixed to frame with
screws (Timber to be paid separately under 1034.00 311.00 77.80
relevant item)
13-3 -Ditto-but 12 mm thick of 500 density with -
ditto - 890.00 311.00 77.80

13-4 -Ditto-but 19 mm thick of 400 density with -

ditto - 1034.00 311.00 77.80
13-5 Partex board 19 mm thick of 500 density
with - ditto - 1034.00 311.00 77.80

13-6 Partex board 26 mm thick of 500 density

with - ditto - 1410.00 311.00 77.80

PARTEX VINYL BOARD IN PARTITION & CEILING ETC.

Per Square metre
13-7 Partex vinyl board as in partition, ceiling 12
mm thick one side laminated 500 kg / cu.m
density fixed to frame with screws (Timber 998.00 311.00 77.80
to be paid under relevant item) Garjan

13-8 -Ditto-but 19mm thick-ditto. 1070.00 311.00 77.80

13-9 -Ditto-but 8mm thick & 600 kg / cu.m
density - ditto. 807.00 311.00 77.80

13-10 Partex vinyl board as in partition, ceiling

12mm thick both side laminated 500 kg /
cu.m density fixed to frame with screws 1204.00 311.00 77.80
(Timber to be paid under relevant item)

240
RESTRICTED
 RESTRICTED
SECTION-13
CEILING AND WALL BOARD ETC RATES
Item Description
13-11 -Ditto-but 19mm thick 1511.00 311.00 77.80
13-12 -Ditto-but 8mm thick (Teak) & 600 kg /
cu.m density -ditto. 1248.00 309.00 77.00

241
RESTRICTED
 RESTRICTED
SECTION-13
CEILING AND WALL BOARD ETC RATES
Item Description
VENEERED PARTEX BOARD IN PARTITION & CEILING Rate in Taka
Add if fixed
Supplied & Except
Per Square metre Fixed Sheets
in
repair/remov
13-13 Veneered board as in partition, ceiling 12mm thick
of Chapalish 500 kg / cu.m density fixed to frame
2014.00 311.00 77.80
with screws (Timber to be paid under relevant item)

13-14 -Ditto-but 19mm thick -ditto- 2207.00 311.00 77.80

13-15 -Ditto- but 26mm thick chapalish with 2475.00 311.00 77.80
ditto.
13-16 -Ditto- but 12 mm thick Garjan veneered with - 1527.00 311.00 77.80
ditto-
13-17 -Ditto- but 19 mm thick Garjan veneered with - 1662.00 311.00 77.80
ditto-
13-18 -Ditto- but 12 mm thick Teak veneered with -ditto- 1965.00 311.00 77.80

13-19 -Ditto- but 19 mm thick Teak veneered with -ditto- 2087.00 311.00 77.80

TERMITE ELIMINATION TREATMENT

Per Square metre Rate in Taka
13-20 Treatment for elimination of termite from wooden
panel, false ceiling, wooden partition, cupboard, 309.00
cabinet etc.

GYPSUM BOARD Rate in Taka

Except Gypsum Board,

Supplied & Add if fixed
Per Square metre Nylex cover & Aluminum
Fixed in repair
framing

13-21 Gypsum board 10mm thick in false ceiling

with supplying & fixing of Aluminum
framing such as 32 x 25 mm size Tee, 25 x
25 mm size cross Tee & 25 x 25 mm size
angle hanging with 14 BG GI wire, Rawl ###### 152.00 38.00
plug, screw etc incl. Nylex cover pasting in
one side of gypsum board. (Natural Colour)

242
RESTRICTED
 RESTRICTED
SECTION-13
CEILING AND WALL BOARD ETC RATES
Item Description
13-22 Gypsum board 10mm thick in false ceiling
with supplying & fixing of Aluminum
framing such as 32 x 25 mm size Tee, 25 x
25mm size cross Tee & 25 x 25mm size ###### 123.40 30.90
angle hanging with 14 BG GI wire, Rawl
plug, screw etc complete (Natural Colour)

243
RESTRICTED
 RESTRICTED
SECTION-13
CEILING AND WALL BOARD ETC RATES
Item Description
ALUMINUM FRAMING ONLY FOR GYPSUM
BOARD / ANY FALSE CEILING Rate in Taka

Supplied & Except Aluminum Tee & Add if fixed

Per Square metre Fixed Angle in repair

13-23 Aluminum framing such as 32 x 25 mm size

Tee, 25 x 25mm size cross Tee & 25 x 25
mm size angle hanging with 14 BG GI wire,
748.00 345.00 86.00
Rawl plug, screw etc as in false ceiling
(Natural Colour)

Materials & Labour

Fixing Add if fixed
5 mm thick 3 mm thick Only in repair

13-24 Plastic wood as in ceiling fixed to

aluminum framing of 32 x 25 mm size Tee,
25 x 25 mm size cross T and 25 x 25 mm
size angle hanging with 14 BG GI wire, 965.00 660.00 110.80 27.70
rawl plug, screw etc. complete. (Framing to
be paid under relevant item).

Per Square metre Materials & Labour

13-25 Hollow plastic board 10 mm thick as in

ceiling fixed to aluminum framing of 32 x
25 mm size Tee, 25 x 25 mm size cross T
and 25 x 25 mm size angle hanging with 14 653.00 110.80 27.70
BG GI wire, rawl plug, screw etc. complete.
(Framing to be paid under relevant item).

Rate in Taka
Materials & Labour
Fixing Add if fixed
10 mm Only in repair
Per Square metre thick
5 mm thick

13-26 Plastic wood as in Partition wall fixed to

Timber frame with screw, wire nails etc.
complete. (Timber to be paid under relevant ###### 1501.00 599.00 149.80
item).

Materials & Labour Fixing Add if fixed

5 mm thick 3 mm thick Only in repair

244
RESTRICTED
 RESTRICTED
SECTION-13
CEILING AND WALL BOARD ETC RATES
Item Description
13-27 Plastic wood as in Ceiling fixed to wooden
frame with screw & gum as spd. (Framing ###### 749.00 156.00 39.00
to be paid under relevant item).

245
RESTRICTED
 RESTRICTED
SECTION-14
WHITE / COLOUR WASHING & DISTEMPERING RATES

Item Description
CEMENT WASH
Per Square metre Rate in Taka
New or old surface

2nd & subsequent

One coat incl 1st coat on old
surface

14-1 Cement slurry wash per coat 28.00 0.00

LIME WASHING

Per Square metre

14-2 White wash 20.00 16.00

14-3 Colour wash 20.00 19.00

14-4 Distempering with water bound distemper incl
acrylic sealer in priming / 1st coat (Berger
73.00 44.00
Robbialac liquid/Asian Paints)

14-5 - Ditto - but Elite / Aqua 69.00 42.00

14-6 - Ditto - but Imperial / Navana 69.00 42.00

14-7 Snowcem wash on walls incl acrylic sealer in

priming / 1st coat (Berger Robbialac) 90.00 53.00

14-8 Snowcem wash on walls incl acrylic sealer in

priming / 1st coat (Thailand) 90.00 53.00

14-9 Snowcem wash on walls incl acrylic sealer in

priming / 1st coat (England) 90.00 53.00

SCRAPING
Per Square metre
Rate in Taka
14-10 Removing white / colour wash & distemper etc
from plastered/unplastered surface. 32.00

245
RESTRICTED
 RESTRICTED
SECTION-14
14-11 Removing of snowcem wash, plastic paint &
weather coat etc from plastered/unplastered
surface. 37.00

246
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
Rate in Taka

GLAZING Thickness

Per sq.m 3 mm 5 mm
15-1 Sheet glass (local) fixed to timber or steel sashes with
putty as specified 778.00 1365.00

15-2 - Ditto - but frosted - ditto - 1164.00 1628.00

15-3 Sheet glass (local) fixed to timber or steel sashes with

hard wood beads & nails as specified 1536.00 2133.00

-Ditto-but frosted (India) - ditto

15-4 1951.00 2427.00
-
Rate in Taka
15-5 Sheet glass 6mm thick tinted / frosted foreign made
fixed to aluminium frame with all accessories all as 2455.00
required.

HACKING OUT

Per sq.m Rate in Taka

15-6 Hacking out old broken glass from sashes remove any
serviceable portion to store disposed off rubbish as 216.00
specified
OILING Rate in Taka

Per cu.m Crude Oil Creosote Oil

One coat Two coat One coat Two coat

15-7 Timber in scantling 1003.00 1506.00 874.00 1253.00

Per sq.m
15-8 Planks, boarding doors windows
trellies work etc. 20.00 34.00 19.00 33.00

Per Metre
15-9 Fillets framing & similar work
exceeding 150 mm girth 9.00 23.00 17.00 23.00

253
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description

15-10 Ballies n.exc. 140 mm mean dia 16.00 31.00 10.00 19.00

15-11 - Ditto - but exc. 140 mm not

exceeding 200 mm mean dia 14.00 26.00 11.00 25.00

254
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description

TARRING Rate in Taka

Per sq.m One coat Two coat

15-12 Tarring on any plain surface 53.00 94.00

Second &
First coat
Primer on subsequent
PAINTING WOOD WORK new work
new or old
coat new or
work
old work

Per sq.m

15-13 Painting timber work ceiling & timber

boarding etc of any description with
synthetic enamel paint. (Berger 79.00 59.00 55.00
Robbialac/Asian Paints)

15-14 - Ditto - (Elite / Aqua) 79.00 58.00 54.00

15-15 - Ditto - (Imperial / Navana ) 79.00 56.00 53.00

15-16 Painting glazed & gauzed windows &

fanlight with synthetic enamel paint. (Berger 57.00 40.00 39.00
Robbialac)

15-17 - Ditto - (Elite / Aqua) 57.00 39.00 39.00

15-18 - Ditto - (Imperial / Navana ) 57.00 38.00 38.00

15-19 Painting to door of any type & description

with synthetic enamel paint. (Berger
Robbialac) 73.00 64.00 59.00

15-20 - Ditto - (Elite / Aqua) 73.00 62.00 58.00

15-21 - Ditto - (Imperial / Navana ) 73.00 60.00 56.00

255
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
Second &
First coat
Primer on subsequent
PAINTING WOOD WORK new work
new or old
coat new or
work
old work

Per Metre
15-22 Painting to fillets, framing, skirting &
similar works n-exc. 150 mm girth with
9.00 9.00 7.00
synthetic enameled paint. (Berger Robbialac)

15-23 - Ditto - (Elite / Aqua) 9.00 9.00 7.00

15-24 - Ditto - (Imperial / Navana ) 9.00 9.00 7.00

Each
15-25 Painting detached article n-exc. 0.1 Sq. M
each with synthetic enamel paint. (Berger
6.00 6.00 6.00
Robbialac)

15-26 - Ditto - (Elite / Aqua) 6.00 6.00 5.00

15-27 - Ditto - (Imperial / Navana ) 6.00 6.00 5.00

PAINTING STEEL & IRON WORK Rate in Taka

Second &
First coat
Primer on subsequent
Per sq.m new work
new or old
coat new or
work
old work

15-28 Painting Red oxide to old surface of any

description except item below.
0.00 56.00 53.00

256
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
15-29 Painting Red oxide to iron guard bras, iron
bars, gratings railing & similar open work
new or old. 0.00 48.00 47.00

257
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
PAINTING STEEL & IRON WORK Rate in Taka

Second &
First coat
Primer on subsequent
Per sq.m new work
new or old
coat new or
work
old work

15-30 Painting to steel doors with synthetic enamel

paint. (Berger Robbialac) 0.00 59.00 56.00

15-31 - Ditto - (Elite / Aqua) 0.00 58.00 55.00

15-32 - Ditto - (Imperial / Navana ) 0.00 56.00 53.00

15-33 Painting to steel glazed or gauzed window

and fanlight with synthetic enamel paint.
0.00 44.00 43.00
(Berger Robbialac)

15-34 - Ditto - (Elite / Aqua) 0.00 43.00 42.00

15-35 - Ditto - (Imperial / Navana ) 0.00 42.00 42.00

15-36 Painting to steel grill with synthetic enamel

paint. (Berger Robbialac) 0.00 44.00 43.00

15-37 - Ditto - (Elite / Aqua) 0.00 43.00 42.00

15-38 - Ditto - (Imperial / Navana ) 0.00 42.00 42.00

15-38A Painting to 50 mm mesh wire neting with

synthetic enamel paint. (Berger Robbialac) 0.00 42.00 40.00

Rate in Taka

2nd &
Per Metre First coat subsequent
coat

258
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
15-39 Painting Red oxide to pipes / gutters & similar works
exc. 150 mm but n-exc. 314 mm girth old or new
26.70 23.00
surface.

259
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description

PAINTING STEEL & IRON WORK Rate in Taka

2nd &
Per Metre First coat subsequent
coat
15-40 Painting Red oxide to pipes/gutters & similar works exc.
150mm girth on old work. 13.00 11.00

Each
15-41 Painting Red oxide to detached articles n-exc. 0.1 sq.m
each old work.
6.00 6.00

Per sq.m
15-42 Aluminum painting to steel doors & windows (Berger
Robbialac) 41.60 40.00

15-43 - Ditto - (Elite / Aqua) 41.10 40.00

15-44 - Ditto - (Imperial / Navana ) 40.60 39.00

15-45 Aluminum painting to steel grills (Berger Robbialac) 40.00 38.00

15-46 - Ditto - ( Elite / Aqua / Imperial / Navana ) 39.60 38.00

15-47 Aluminum painting to corrugated sheet in roof &

partition etc. (Berger Robbialac) 78.50 53.00

15-48 - Ditto - ( Elite / Aqua / Imperial / Navana ) 76.40 52.10

Per Metre
15-49 Aluminum painting to pipes gutters etc n-exc. 150 mm 18.60 16.00
girth

Each

260
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
15-50 Aluminum paint to detached articles n-exc. 0.1 sq.m
each new or old work. 13.00 12.00

261
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
Rate in Taka
2nd & subsequent
First coat for on new surface
PAINTING ON PLASTERED WALL new surface and any coat on
old surface

Per sq.m
15-51 Plastic emulsion paint with acrylic sealer in priming /
1st coat on plastered walls incl all detached attachment 317.00 107.00
(Berger Robbialac)

15-52 - Ditto - (Elite / Aqua) 316.00 105.40

15-53 - Ditto - (Imperial / Navana ) 315.00 104.00

15-54 Painting on plastered walls with syn. enamel paint incl.
all detached attachment (after removing of paint old
surface may be treated as new surface) Berger Robbialac 246.00 91.00

15-55 - Ditto - (Elite / Aqua) 247.00 92.40

15-56 - Ditto - (Imperial / Navana ) 246.00 91.00

Per Metre
15-57 Ditto to pipes picture rails dados etc n. exc. 150 mm
girth (Berger Robbialac) 13.20 12.00

15-58 - Ditto - (Elite / Aqua) 13.00 12.00

15-59 - Ditto - (Imperial / Navana ) 12.60 12.00

PAINTING WITH BLACK JAPAN OR ORDINARY

Rate in Taka
VARNISH ONE COAT

Per sq.m

15-60 Surface of any description 43.90

Per Metre

15-61 Linear work n-exc. 150 mm girth 13.00

Each

262
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
15-62 Small detached articles such as locks, latches shoot doors & frames,
casement fasteners etc. 16.00

263
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
Rate in
BURNING OLD PAINTS
Taka
Per sq.m
15-63 Burning of paints (or removing by chemical where burning is not 49.00
allowed)

15-64 Washing down old wood work 22.00

WRITING LETTERS

Each

15-65 Writing letters or figures incl. stops, brackets, sashes etc. 6.00

Per sq.m

15-66 Wax polishing to wooden joinery 220.00

15-67 spirit polishing to new wood surface complete rate 524.00

15-68 Ditto but sashes glazed or gauzed complete rate 378.00

15-69 Road marking paint on any surface complete/finished as directed.

(Berger Robbialac)
133.00

15-70 - Ditto - (Elite / Aqua) 236.00

15-71 - Ditto - (Imperial / Navana ) 202.40

15-72 Spirit polishing to old wooden surface complete rate 331.00

15-73 Spirit polishing to old wooden sashes glazed or gauzed complete 244.00

264
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description

Second &
First coat
Primer on subsequent
PAINTING HARD OR SOFT BOARD new work
new or old
coat new or
work
old work

Per sq.m
15-74 Painting to hard or soft board & Partex board
etc of any description with synthetic enamel
paint. (Berger Robbialac/Asian Paints) 97.00 81.80 61.00

15-75 - Ditto - (Elite / Aqua) 97.00 79.10 59.00

15-76 - Ditto - (Imperial / Navana ) 97.00 77.00 57.00

Per Metre
15-77 Painting with synthetic enamel paint to pipes
gutters & similar work n-exc. 150 mm girth
new or old surface as spd. (Berger 0.00 20.00 17.00
Robbialac/Asian Paints)

15-78 - Ditto - (Elite / Aqua) 0.00 19.80 17.00

15-79 - Ditto - (Imperial / Navana ) 0.00 19.50 17.00

15-80 Painting with synthetic enamel paint to pipes
gutters & similar work exc. 150 mm but n.
exc. 314mm girth new or old surface. 0.00 22.60 18.00
(Berger Robbialac/Asian Paints)

15-81 - Ditto - (Elite / Aqua) 0.00 22.90 19.00

15-82 - Ditto - (Imperial / Navana ) 0.00 22.60 18.00

Per Sq. M Rate in Taka

15-83 Mansion Polish on ceramic brick work new or old surface as spd. 116.00

GLAZING Thickness
Per sq.m 3 mm 5 mm

265
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
15-84 Sheet glass foreign made distortion free fixed to
aluminum frame with foreign origin accessories as per
0.00 1381.00
direction.

15-85 - Ditto - but tinted glass -ditto- 0.00 1722.00

15-86 - Ditto -but foreign made original frosted glass -ditto- 0.00 1646.00

266
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
Thickness

Per sq.m 3 mm 6 mm
15-87 Decorative / designed / figured Tinted glass foreign
made fixed to aluminum frame with foreign origin
0.00 2343.00
accessories as per direction.

MISC PAINTING

Final coat on
Primer on
Per sq.m new surface
new or old
surface

15-88 Spray painting with synthetic enamel paint to steel

surface all as spd.(Berger Robbialac/Asian Paints) 209.00 309.00

15-89 - Ditto - (Elite / Aqua) 209.00 309.00

15-90 - Ditto - (Imperial / Navana ) 209.00 309.00

Rate in Taka

15-91 Prepare surface and apply bone tile paint (textured

paint) on plastered or brick surface complete. 865.00

15-92 Apply 2xcoats of silicon water repellent paint (Berger/

Asian) at fair face new or old surface all complete as 2855.00
spd.
Second &
First coat on Subsequent
Per sq.m new surface coat on new or
old surface

15-93 Red oxide painting to brick/plastered surface complete 74.00 57.00

267
RESTRICTED
 RESTRICTED
SECTION 15
GLAZING, PAINTING AND LETTERING RATES
Item Description
15-94 Painting on Tennis court surface with non-skid tennis
court paint incl. Cleaning the surface all as spd. (Berger
Robbialac / Elite / Aqua/Asian) 296.00 154.00

15-95 Acrylic weather coat paint with acrylic sealer in priming

/ 1st coat on plastered walls / surface including all
detached attachment (Berger Robbialac/Asian Paints) 171.00 97.00

15-96 - Ditto - but (Elite / Aqua / Navana 170.00 97.00

Applying one coat extrior wall putty plaster serface

15-97 79.00 0.00
proper scraping of RAK/Equivalent product as specified.

15-98 Applying sealer Interior wall putty on plaster serface 43.00 0.00
after proper scraping of RAK/Equivalent products and as
all specified.
15-99 Applying extrioer primer sealer of Asian/ 86.00 0.00
RAK/Equivalent products and all as spd.

15-100 Applying apex weather proof exterior emulsion paints 137.00 124.00
(weather Coat) of Asian paints all as spd.

15-101 Applying wall putty for intorior and exterior wall after 125.00 0.00
proper scraping of Asian paint/RAK/Equivalent product
all as spd.

15-102 Applying sealer water base in wall and floor of Asian 94.00 86.00
paint/RAK/Equivalent product all as spd.

15-103 Applying Acrylic distemper to wall celling of Asian

paints/Equivalent product all spd.
58.00 31.00

15-104 Applying Apcolite premium emulsion plastic paints of

Asian Paint product/RAK/Equivalent all as spd. 233.00 89.00

Rate in Taka
15-105 Apply lequied polish two wooden door and window as
spd. 399.00

268
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
Rate in Taka

SANITARY FITTINGS Supplied & Fixed Add if

Fixing only fixed in
Special repair
Each White Coloured
Coloured
16-1 Supplying & fixing in position European type
glazed porcelain water closet with 'P' or 'S' trap,
plastic seat cover with all necessary fittings BISF 4688.00 4688.00 5730.00 988.00 247.00
products standard quality (code no-104/104-A)

Add if
Supplied &
Fixing only fixed in
Fixed
repair

16-2 - Ditto - but RAK product (Model Karla) 6073.00 988.00 247.00

16-3 - Ditto - but (Model Orient) 6540.00 988.00 247.00

16-4 - Ditto - but (Model Washington) 9803.00 988.00 247.00

16-5 - Ditto - but (Model Venice) 13642.00 988.00 247.00

Supplied & Fixed Add if

Fixing only fixed in
Special
White Coloured repair
Coloured
16-6 Cistern flushing porcelain with lid without fittings
for water closet apparatus European type (BISF 2505.00 2955.00 3413.00 659.00 165.00
products standard quality) code no-401

Add if
Supplied &
Fixing only fixed in
Fixed
repair

16-7 - Ditto - but with fittings RAK product (Model Karla) 3550.00 659.00 165.00

16-8 - Ditto - but (Model Orient) 4669.00 659.00 165.00

16-9 - Ditto - but (Model Washington) 4950.00 659.00 165.00

16-10 - Ditto - but (Model Venice) 5209.00 659.00 165.00

Supplied & Fixed Add if

Fixing only fixed in
Special repair
White Coloured
Coloured

267
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
16-11 European type glazed porcelain Combi closet with
'P' or 'S' trap, plastic seat cover with all necessary
10983.00 12545.00 13922.00 988.00 247.00
fittings BISF products standard quality (code no-
114/414, 114A/414)

Supplied & Add if fixed

Each Fixing only
in repair
Fixed

268
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
16-11A European type glazed porcelain Combi closet with 'P' or 'S' trap, plastic
seat cover with all necessary fittings RAK products standard quality
(Karla) 10256.00 988.00 247.00

16-11B European type glazed porcelain Combi closet with 'P' or 'S' trap, plastic
seat cover with all necessary fittings RAK products standard quality 13354.00 988.00 247.00
(Orient)
Add if
Supplied &
Each Fixing only fixed in
Fixed
repair
16-12 Full set of spare parts of low down cistern (Combi closet) incl. all
necessary fitting of approved quality 1994.00 78.00 19.00

16-13 Supply & fixing of low down cistern fittings incl. ball cock with all
fitting standard quality 856.00 77.80 19.00

16-14 Supply, fittings, fixing of Asiatic type glazed porcelain water closet incl.
CI trap seated on concrete floors making good of disturbed surfaces BISF
2716.00 1109.00 277.00
product standard quality (Code No. 313)

16-15 - Ditto - but RAK product 3672.00 1109.00 277.00

Rate in Taka
Add if
Supplied &
Each Fixing only fixed in
Fixed
repair
16-16 Supply & fixing oriental pan orrissa type glazed porcelain water closet
incl. CI trap -ditto-BISF product standard quality (Code No. 317) 3583.00 1109.00 277.00

16-17 Supply fitting & fixing of CI flushing cistern 13.60 ltr (3 gallon) capacity
incl. CI brackets, 31mm dia PVC flush pipe, 12.50 mm dia plastic
connection with nipple, 12.50 mm dia ball cock & pulling chain etc 3777.00 691.00 173.00
complete.

16-18 - Ditto - but Plastic low down cistern (Local made) 2524.00 678.00 169.00
16-19 Supplying, fitting & fixing in position porcelain foot rest (white) seated
on concrete floors & make good the disturbed surface (BISF product 666.00 108.90 27.00
standard quality Code No. 305)

Rate in Taka

Supplied & Fixed Add if

Size mm Fixing only fixed in
Each White Coloured repair

269
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
16-20 Supplying, fitting, fixing of glazed porcelain wash
hand basin (WHB) fixing in position with heavy
type CI bracket , 31 mm dia PVC waste pipe,
12.50mm dia plastic connection with nipple
12.50mm dia CP pillar cock, 31 mm dia CP basin,
waste with coupling, chain & plug incl. making 580x445 4740.00 4820.00 701.00 175.00
holes, wooden blocks, rawl plug, screws & making
good the disturbed surface. (White Model-204,
Coloured Model-204)

270
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
16-21 Supplying, fitting, fixing of glazed porcelain wash
hand basin (WHB) fixing in position with heavy
type CI bracket , 31 mm dia PVC waste pipe,
12.50mm dia plastic connection with nipple
12.50mm dia CP pillar cock, 31 mm dia CP basin, 570x420 4948.00 4772.00 717.00 179.40
waste with coupling, chain & plug incl. making
holes, wooden blocks, rawl plug, screws & making
good the disturbed surface. (White Model-211,
Coloured Model-211)
Rate in Taka
Add if
Supplied &
Fixing only fixed in
Fixed
repair
16-22 - Ditto - but RAK product (Model Karla) 5646.00 717.00 179.40

16-23 - Ditto - but (Model Orient) 5945.00 717.00 179.40

16-24 - Ditto - but (Model Washington) 6664.00 717.00 179.40

16-25 - Ditto - but (Model Venice) 8640.00 717.00 179.40

16-26 - Ditto - but (Model Windsor) 7442.00 717.00 179.40

16-27 Supply and fixing coloured glazed porcelain wash hand Basin (Cabinet 5729.00 782.00 196.00
type) RAK size 590 x 475mm fixing in position on RCC slab, 12.50mm
dia plastic connection pipe with nipple, 12.50mm dia pillar cock. 31mm
dia CP. Basin waste with coupling & making good the disturb surface all
as spd.
16-27A - Ditto - but corner type RAK product. 4937.00 763.00 191.00

Rate in Taka

Supplied & Fixed Add if

Fixing only fixed in
Each White Coloured repair
16-28 Supplying, fitting, fixing of glazed porcelain pedestal for wash
hand basin (WHB) (BISF product standard quality (Code No.-
936.00 981.00 65.90 16.00
701A)

Add if
Supplied &
Fixing only fixed in
Fixed
repair

16-29 - Ditto - but RAK product (Model Karla) 1786.00 65.90 16.00

16-30 - Ditto - but (Model Orient) 1822.00 65.90 16.00

16-31 - Ditto - but (Model Washington) 2050.00 65.90 16.00

16-32 - Ditto - but (Model Venice) 2685.00 65.90 16.00

271
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description

16-33 - Ditto - but (Model Windsor) 2439.00 65.90 16.00

16-34 Supplying & fixing in position 12.50 mm dia chromium plated pillar
cock standard quality. 1079.00 88.00 22.00

272
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description

Supplied & Fixed Add if

Low Fixing only fixed in
WHB &
Each Down High cistern repair
Sink etc
cistern
16-35 Supplying, fitting & fixing in position 31 mm dia
PVC pipe standard quality. 142.00 142.00 230.00 43.50 11.00

16-36 Supply and fixing of 38 mm dia sink & WHB waste

pipe. 140.00 130.00 253.00 43.50 11.00

Add if
Supplied &
Each Fixing only fixed in
Fixed
repair
16-37 Supplying, fitting, fixing in position 12.50 mm dia plastic connection
with nipple standard quality. 144.00 41.20 10.00

16-38 Supplying, fitting, fixing in position CP chain with rubber plug for
WHB, Sink etc 186.00 14.00 4.00

16-39 Supplying, fitting, fixing in position 31 mm dia CP basin waste with

coupling. 424.00 41.00 10.00

Rate in Taka
Supplied & Fixed Add if
Cistern Fixing only fixed in
Each WHB Sink
flushing repair
16-40 Supplying, fitting, fixing in position CI brackets
heavy type standard quality 566.00 566.00 566.00 183.00 46.00

Add if
Supplied &
Fixing only fixed in
Fixed
repair
16-41 Supplying, fitting, fixing in position porcelain stand urinal
(BISF product standard quality size 490 x 385mm) incl 31 mm
dia PVC waste pipe, 12.50mm dia plastic connection with 2135.00 669.00 167.00
nipple (without flushing cistern) (Code No. 603)

16-42 Supplying, fitting, fixing in position glazed porcelain flat

squatting type urinal with all necessary fittings BISF product
standard quality size 610x 375mm (without flushing cistern) 1501.00 351.00 88.00
Model No. 602

Add if
Supplied &
Each Size mm Fixing only fixed in
Fixed
repair

273
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
16-43 Supplying, fitting, fixing in position porcelain kitchen sink
with heavy type CI brackets 31mm dia CP chain, plug, water
pipe & 12.50 mm dia CP bib cock 200mm long incl. making
holes, wooden blocks, rawl plug, screws & making good the 515x430
disturbed surface, (BISF product standard quality ) Model No. x275 mm 5009.00 685.00 171.00
502

274
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
16-44 Supplying, fitting, fixing in position porcelain kitchen sink
with heavy type CI brackets 31mm dia CP chain, plug, water
pipe & 12.50 mm dia CP bib cock 200mm long incl. making 625x490
holes, wooden blocks screws & making good the disturbed x224 mm 5200.00 682.00 171.00
surface, (BISF product standard quality ) Model No. 502

Add if
Supplied &
Fixing only fixed in
Fixed
repair
16-45 Supplying, fitting, fixing in position toilet paper holder approved size
and standard quality fixed complete with wooden block, rawl plug &
screws etc. 586.00 82.60 20.70

16-46 - Ditto - but RAK product

651.00 82.60 20.70

16-47 Supplying, fitting, fixing in position CP soap dish approved size and
standard quality fixed complete with wooden block / rawl plug screws
413.00 54.00 13.00
etc.

16-48 - Ditto - but RAK product 408.00 54.00 13.00

16-48A - Ditto - but melamine 276.00 54.00 13.00

Supplied & Fixed Add if

Fixing only fixed in
Each 19 mm dia 25mm dia repair
16-49 Supplying, fitting, fixing in position CP Towel Rail 600 mm long
standard quality fixed complete with wooden block, rawl plug & 590.00 625.00 75.00 19.00
screws etc.

16-50 - Ditto - but RAK product 633.00 75.00 19.00

16-50A - Ditto - but 19mm dia tube 175 mm dia Circular type 542.00 - 75.00 19.00
Add if
Materials and labour Fixing only fixed in
repair
16-51 Supply and fixing of 12 mm CP Towel Rail Triangular Type standard
quality fixed complete with wooden block, rawl plug & screws etc. 696.00 145.00 36.00

Supplied & Fixed Add if

350x450m Fixing only fixed in
Each 450x600mm
m repair
16-52 Supplying, fitting, fixing in position bath mirror approved
quality fixed complete with rawl plug, rubber washer, screws/ 457.00 540.00 98.00 24.00
clip & hard board backing etc.
Add if
Supplied &
Fixing only fixed in
Fixed
repair

275
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description
16-53 Supplying, fitting, fixing in position plastic seat cover with all
fittings standard quality for WC European type 942.00 43.00 11.00

Supplied & Fixed Add if

Fixing only fixed in
Each White Coloured repair
16-54 Supplying & fixing in position porcelain lid of cistern , BISF
1179.00 1464.00 24.00 6.00
product standard quality (size 552x254mm) Model No. 401A.

276
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Supplying & fixing in position porcelain lid of cistern , BISF
Item Description
product standard quality (size 552x254mm) Model No. 401A.
Supplied & Fixed Add if
Fixing only fixed in
CI Grating CP Grating
repair
16-55 Supply and fixing of 10 cm dia grating heavy type standard
162.30 191.00 33.00 8.00
quality
Add if
Supplied &
Each Fixing only fixed in
Fixed
repair
16-56
Supply and fixing of 100 mm box type PVC grating any colour fixed in position and made
good the disturbed area all as per direction of Engineer in charge.
480.00 132.00 33.00

16-57 Supply and fixing of 10 cm dia CI floor trap heavy type standard quality
1085.00 82.00 21.00
16-58 Glass shelf 5mm thick (125mm x 600 mm) with best quality CP railing & brackets fixed with
rawl plug / wooden block screws etc. 655.00 41.00 10.00

Supply and fixing of Glass for shelf only 5mm thick (125mm x 600 mm)
16-58A 143.00 41.00 10.00
Supplied & Fixed
Single Double Add if fixed
Fixing only
Each draining draining in repair
board board
16-59 Stainless steel kitchen sink with single / double draining board (Foreign
made) with heavy type CI brackets, 31mm dia CP waste with brass 6074.00 10541.00 659.00 165.00
coupling waste pipe & 12.50mm dia CP bib cock 200 mm long incl.
making holes, wooden blocks, rawl plug, screw & making good the Add if
Supplied &
disturbed surface. Fixing only fixed in
Fixed
repair
16-60 Supply & fixing in position CP bottle trap standard quality. 1327.00 88.00 22.00

New Item:

Add if
Supplied &
Each Fixing only fixed in
Fixed
repair
16-39A Supplying, fitting, fixing in position 31 mm dia CP basin waste with
coupling. 407.00 30.00 7.00

Material
Fixing
& Labour
only
Charge

16-61 Applying and Fixing of Asian pan (Lotas) of "Abul Khair Ceramics
Industries Ltd" product with marble shed incl. fitting complete with all as 6168.00 1347.00
spd.
Add if
Supplied Fixing
fixed in
& Fixed only
repair

277
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description

16-62 Supply & fixing Asian Pan (ORCHID) without marble shade
of Abul Khair Ceramics Industries product and all as spd.
6781.00 1116.00 277.00

278
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description

Material
Fixing
& Labour
only
Charge

16-63 Supply & fixing of European type water closet with 'S' trap and water
Tank of Abul Khair Industries Ltd product Model (IMOLA) and all as
spd. 11476.00 988.00

16-64 Supply & fixing of European type water closet with 'S' trap and water
Tank of Abul Khair Industries Ltd product Model (VERSO) and all as
10937.00 988.00
spd.

16-65 Supply & fixing of Commode ( Combi Closet) of Abul Khair Industries
Ltd product Model (VVIOLA) and all as spd.
31653.00 988.00

16-66 Supplying and fixing of Wash hand basin (WHB) with Pedastal and
other fittings like PVC waste pipe, plastic connection with nipple, CP
pillar cock, CP basin, waste with coupling, chain & plug of 'Abul Khair
Industries Ltd' product Model VERSO and all as spd. 6065.00 706.00

Rate in Taka
Supplied & Fixed
Add if
Fixing
White Coloured fixed in
only
repair
16-67 Supplying and fixing of colourd Wash hand basin (WHB) without
Pedastal and other fittings like PVC waste pipe, plastic connection with
nipple, CP pillar cock, CP basin, waste with coupling, chain & plug of
'Abul Khair Industries Ltd' product Model VERSO and all as spd. 4755.00 659.00 0.00

16-68 Supplying and fixing of wash hand basin with

pedastal incl all fittings of Abul Khair Industries
Ltd. Products , Model SOFIA and all as spd. 5095.00 659.00 0.00

16-69 Supplying and fixing of counter Basin with Marble

Shade incl all fittings of Abul Khair Industries Ltd.
Products , Model JINATA and all as spd. 6701.00 790.00 0.00

Rate in Taka
Material & Labour Fixing
charge only

279
RESTRICTED
 RESTRICTED
SECTION-16
SANITARY FITTINGS RATES
Item Description

16-70 Supplying and fixing of water closet with water tank complete with
marble shade incl all fittings of Abul Khair Industries Ltd product (Model-
11561.00 988.00
ROSEIA) and all as spd.

280
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

Trench excavation Rate is to be taken from item of work of section 1

embankments (Earth work)

WATER TUBING (GI)

Per Metre Rate in Taka
Add if for
INTERNAL WORK (inside of house or Materials Add if fixed
and Labour
Fixing only in r/r
wash and
room either concealed or surface) clean

17-1 Tubes "Water quality" (GI) with equal

socket and laid complete in wall / floor
groove or fixed to walls / ceiling / floors
355.00 174.20 87.00 23.80
etc including clamps and plugs as required
12.50 mm dia. Brand National Tubes Ltd

17-2 - Ditto - but (Other than NTL brand) 351.00 174.00 87.00 23.80
17-3 - Ditto - but 18.70 mm dia (National 456.00 192.00 96.00 23.80
Tubes Ltd)

17-4 - Ditto - but (Other than NTL brand) 420.00 192.00 96.00 23.80
17-5 - Ditto - but 25.00 mm dia (National 584.00 213.00 106.00 31.00
Tubes Ltd)

17-6 - Ditto - but (Other than NTL brand) 498.00 212.90 106.00 31.00

EXTERNAL WORK (outside of house

or room / ground either concealed or
surface)

17-7 Tubes "Water quality" (GI) with equal

socket and laid complete in trenches
(exclusive of excavation) or fixed to walls
ceiling and floors etc including clamps and 308.00 128.00 64.00 23.80
plugs as required 12.50 mm dia. (National
Tubes Ltd)

17-8 - Ditto - but (Other than NTL brand) 305.00 128.00 64.00 23.80
17-9 - Ditto - but 18.70 mm dia (National 424.00 160.00 80.00 23.80
Tubes Ltd)

276
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-10 - Ditto - but (Other than NTL brand) 388.00 160.00 80.00 23.80

277
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

EXTERNAL WORK (outside of house

or room / ground either concealed or Rate in Taka
surface)
Add if for
Materials Add if fixed
Per Metre and Labour
Fixing only in r/r
wash and
clean
17-11 - Ditto - but 25.00 mm dia (National 563.00 192.00 96.00 31.00
Tubes Ltd)

17-12 - Ditto - but (Other than NTL brand) 477.00 192.00 96.00 31.00

17-13 -Ditto-but 37.50 mm dia (National 783.00 212.90 106.00 38.00

Tubes Ltd

17-14 - Ditto - but (Other than NTL brand) 718.00 212.90 106.00 38.00

17-15 - Ditto- but 50.00 mm dia (National 936.00 251.00 126.00 42.00
Tubes Ltd)

17-16 - Ditto - but (Other than NTL brand) 877.00 251.00 126.00 42.00

17-17 - Ditto - but 75.00 mm dia (National 1452.00 279.00 140.00 58.00
Tubes Ltd)

17-18 - Ditto - but (Other than NTL brand) 1387.00 279.00 140.00 58.00

17-19 - Ditto - but 100.00 mm dia (National 2119.00 314.00 157.00 63.00
Tubes Ltd)

- Ditto - but (Other than NTL brand)

17-20 1990.00 314.00 157.00 63.00
thickness 4-4,20mm diamond
17-21 - Ditto - but 150.00 mm dia (National 0.00 346.00 173.00 83.00
Tubes Ltd)

17-22 - Ditto - but (Other than NTL brand) 3354.00 346.00 173.00 83.00

17-23 - Ditto - but 200.00 mm dia (National 0.00 371.00 186.00 99.00
Tubes Ltd)

17-24 - Ditto - but (Other than NTL brand) 4464.00 371.00 186.00 99.00

278
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
TUBES "STEAM QUALITY" Rate in Taka
Add if for
Materials Add if fixed
Per Metre and Labour
Fixing only in r/r
wash and
clean
17-25 Tubes "Steam quality" with socket,
weldless as IRS specification No. 3-31 and
laid complete in trenches (exclusive of
excavation) or fixed to walls ceiling and 344.00 212.90 106.00 0.00
floors etc including clamps and plugs as
required 12.50 mm dia.

17-26 -Ditto-but 18.70 mm dia 414.00 212.90 106.00 0.00

17-27 -Ditto-but 25.00 mm dia 487.00 212.90 106.00 0.00
17-28 -Ditto-but 37.50 mm dia 792.00 348.00 174.00 0.00
17-29 -Ditto-but 50.00 mm dia 906.00 348.00 174.00 0.00
17-30 -Ditto-but 75.00 mm dia 1,197.00 383.00 192.00 0.00

Materials and Labour (wall

Add if for
PVC / uPVC TUBES thickness of tubes will be the Add if fixed
same as given in sec-29) Fixing only in r/r
wash and
clean
Per Metre PVC uPVC
17-31 PVC / uPVC Tubing with all
fittings (i.e. socket, bends
elbows, tees, etc.) and laid in
trenches or fixed to walls,
ceiling, etc either surface or
68.10 - 31.90 16.00 -
concealed including all
consumables but exclusive
trenches excavation 13 mm dia.

17-32 - Ditto - but 16.00 mm dia 88.50 88.50 38.30 19.00 -

17-33 - Ditto - but 20.00 mm dia 90.60 96.60 38.30 19.00 -

17-34 - Ditto - but 25.00 mm dia 113.60 122.00 42.60 21.00 -

17-35 - Ditto - but 30 mm dia. 142.20 150.50 42.60 21.00 -

279
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

Materials and Labour (wall

Add if for
PVC / uPVC TUBES thickness of tubes will be the Add if fixed
same as given in sec-29) Fixing only in r/r
wash and
clean
Per Metre PVC uPVC

17-36 - Ditto - but 40.00 mm dia 210.00 219.00 47.90 24.00 -

17-37 - Ditto- but 50.00 mm dia 272.00 285.00 47.90 24.00 -

17-38 - Ditto - but 75.00 mm dia 430.00 482.00 63.90 31.90 -

17-39 - Ditto - but 100.00 mm 712.00 861.00 100.60 50.00 -

dia
17-40 - Ditto - but 150.00 mm 1566.00 1,984.00 155.70 78.00 -
dia
17-41 - Ditto - but 200.00 mm 2168.00 2,438.00 173.00 86.00 -
dia

PVC Coil Pipe 25 mm 20 mm - - -

17-41 A - Ditto - but Coil pipe
approved brand 123.30 109.00 62.30 31.00 -

SOCKET (GI) Rate in Taka

Materials and Add if fixed
Each Labour
Fixing only
in r/r

17-42 Socket GI 12.50mm 49.90 31.90 16.00

17-43 - Ditto - but 18.70 mm 53.50 31.90 16.00

17-44 - Ditto - but 25.00mm 76.10 42.60 21.00

17-45 - Ditto - but 37.50 mm 144.50 54.70 27.00

17-46 - Ditto - but 50.00mm 166.10 54.70 27.00

17-47 - Ditto - but 75.00mm 391.00 63.90 31.90

17-48 - Ditto - but 100.000mm 677.00 159.70 80.00

17-49 - Ditto - but 150.00mm 827.00 159.70 80.00

280
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-50 - Ditto - but 200.00mm 986.00 159.70 80.00

281
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

TEE EQUAL (GI) Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r

17-51 Tee equal 12.50 mm 54.70 31.90 16.00

17-52 - Ditto - but 18.70mm 103.80 31.90 16.00

17-53 - Ditto - but 25.00mm 153.90 42.60 21.00

17-54 - Ditto - but 37.50mm 150.50 54.70 27.00

17-55 - Ditto - but 50.00mm 226.00 54.70 27.00

17-56 - Ditto - but 75.00mm 657.00 63.90 31.90

17-57 - Ditto - but 100.00mm 974.00 159.70 80.00

17-58 - Ditto - but 150.00mm 3922.00 958.00 479.00

17-59 - Ditto - but 200.00mm 4,401.00 958.00 479.00

SOCKET REDUCING (GI)

Each

17-60 Socket reducing (GI) 18.70 mm x down to 12.50 mm 58.30 31.90 16.00

17-61 - Ditto - but 25.00 mm x down to 12.50 mm 73.80 31.90 16.00

17-62 - Ditto - but 37.50 mm x down to 12.50 mm 116.80 42.60 21.00

17-63 - Ditto - but 50.00 mm x down to 12.50 mm 173.00 54.70 27.00

17-64 - Ditto - but 75.00 mm x down to 12.50 mm 406.00 63.90 31.90

17-65 - Ditto - but 100.00 mm x down to 12.50 mm 968.00 159.70 80.00

282
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-66 - Ditto - but 150.00 mm x down to 12.50 mm 1,157.00 159.70 80.00

283
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

TEE REDUCING (GI) Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r

17-67 Tee reducing 18.70 mm x down to 12.50 mm 84.60 31.90 16.00

17-68 - Ditto - but 25.00 mm x down to 12.50 mm 106.20 31.90 16.00

17-69 - Ditto - but 37.50 mm x down to 12.50 mm 198.20 42.60 21.00

17-70 - Ditto - but 50.00 mm x down to 12.50 mm 232.00 54.70 27.00

17-71 - Ditto - but 75.00 mm x down to 12.50 mm 657.00 63.90 31.90

17-72 - Ditto - but 100.00 mm x down to 12.50 mm 1097.00 383.00 192.00

17-73 - Ditto - but 150.00 mm x down to 12.50 mm 3896.00 639.00 319.00

ELBOW (GI)

Each

17-74 Elbow (GI) 12.50 mm 53.00 31.90 16.00

17-75 - Ditto - but 18.70 mm 61.90 31.90 16.00

17-76 - Ditto - but 25.00 mm 95.30 42.60 21.00

17-77 - Ditto - but 37.50 mm 152.00 54.70 27.00

17-78 - Ditto - but 50.00 mm 189.00 54.70 27.00

17-79 - Ditto - but 75.00 mm 782.00 159.70 80.00

17-80 - Ditto - but 100.00 mm 1233.00 383.00 192.00

284
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-81 - Ditto - but 150.00 mm 3233.00 958.00 479.00

285
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
BEND (MS / GI) Rate in Taka
Materials and Add if fixed
Each Labour
Fixing only
in r/r

17-82 Bend (GI) 12.50 mm 69.10 31.90 16.00

17-83 - Ditto - but 18.70 mm 84.60 31.90 16.00

17-84 - Ditto - but 25.00 mm 153.90 42.60 21.00

17-85 - Ditto - but 37.50 mm 248.00 54.70 27.00

17-86 - Ditto - but 50.00 mm 379.00 54.70 27.00

17-87 - Ditto - but 75.00 mm 1418.00 159.70 80.00

17-88 - Ditto - but 100.00 mm 2973.00 383.00 192.00

17-89 - Ditto - but 150.00 mm 6904.00 958.00 479.00

17-90 - Ditto - but 200.00 mm 7,304.00 958.00 479.00

17-87A Both end flanged type MS Bend 75 mm dia 1,493.00 383.00 192.00

17-88A Both end flanged type MS Bend 100 mm dia 2,675.00 479.00 239.00

17-89A Both end flanged type MS Bend 150 mm dia 5,819.00 639.00 319.00

ELBOW REDUCING(GI)

Each
17-91 Elbow reducing (GI) 18.70 mm x down to 12.50 mm
73.80 31.90 16.00
size

17-92 - Ditto - but 25.00 mm x down to 12.50 mm 104.80 42.60 21.00

17-93 - Ditto - but 37.50 mm x down to 12.50 mm 152.00 54.70 27.00

17-94 - Ditto - but 50.00 mm x down to 12.50 mm 180.00 54.70 27.00

17-95 - Ditto - but 75.00 mm x down to 12.50 mm 785.00 159.70 80.00

17-96 - Ditto - but 100.00 mm x down to 12.50 mm 1,003.00 159.70 80.00

17-97 - Ditto - but 150.00 mm x down to 12.50 mm 3,409.00 958.00 479.00

286
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-98 - Ditto - but 200.00 mm x down to 12.50 mm 3,712.00 958.00 479.00

287
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

Materials and Add if fixed

CHECK NUT (GI) Labour
Fixing only
in r/r

Each

17-99 Check nut (GI) 12.50 mm 39.50 19.20 10.00

17-100 Check nut (GI) 18.70 mm 51.90 25.50 13.00

17-101 Check nut (GI) 25.00 mm 69.10 31.90 16.00

17-102 Check nut (GI) 37.50 mm 98.90 42.60 21.00

17-103 Check nut (GI) 50.00 mm 118.20 54.70 27.00

17-104 Check nut (GI) 75.00 mm 276.00 63.90 31.90

17-105 Check nut (GI) 100.00 mm 430.00 76.60 38.00

17-106 Check nut (GI) 150.00 mm 638.00 127.70 64.00

17-107 Check nut (GI) 200.00 mm 786.00 127.70 64.00

UNION SOCKET / JOINT (GI)

Each

17-108 Union socket (GI) 12.50 mm 95.00 31.90 16.00

17-109 Union socket (GI) 18.70 mm 118.10 31.90 16.00

17-110 Union socket (GI) 25.00 mm 142.00 42.60 21.00

17-111 Union socket (GI) 37.50 mm 239.00 54.70 27.00

17-112 Union socket (GI) 50.00 mm 310.00 54.70 27.00

17-113 Union socket (GI) 75.00 mm 855.00 76.60 38.00

288
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-114 Union socket (GI) 100.00 mm 1371.00 95.80 48.00

289
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

NIPPLE (GI/MS) Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r

17-115 Nipple (GI/MS) 12.50 mm 47.50 31.90 16.00

17-116 Nipple (GI/MS) 18.70 mm 53.50 31.90 16.00

17-117 Nipple (GI/MS) 25.00 mm 60.70 31.90 16.00

17-118 Nipple (GI/MS) 37.50 mm 112.20 54.70 27.00

17-119 Nipple (GI/MS) 50.00 mm 161.00 54.70 27.00

17-120 Nipple (GI/MS) 75.00 mm 376.00 63.90 31.90

17-121 Nipple (GI/MS) 100.00 mm 701.00 63.90 31.90

PLUG (GI / MS)

Each

17-122 Plug (GI/MS) 12.50 mm 31.10 19.20 10.00

17-123 Plug (GI/MS) 18.70 mm 37.10 19.20 10.00

17-124 Plug (GI/MS) 25.00 mm 47.10 25.50 13.00

17-125 Plug (GI/MS) 37.50 mm 73.80 31.90 16.00

17-126 Plug (GI/MS) 50.00 mm 95.40 31.90 16.00

290
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

CAP (GI) Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r

17-127 Cap (GI) 37.50 mm 126.50 31.90 16.00

17-128 Cap (GI) 50.00 mm 134.90 31.90 16.00

17-129 Cap (GI) 75.00 mm 245.00 47.90 24.00

17-130 Cap (GI) 100.00 mm 318.00 63.90 31.90

17-131 Cap (GI) 150.00 mm 449.00 95.80 48.00

17-132 Cap (GI) 200.00 mm 649.00 95.80 48.00

SLUICE VALVE (water quality)
Each
17-133 Sluice valve water quality high pressure with iron
wheel head complete with nuts, with flanges bolts and
5556.00 479.00 239.00
gasket 50 mm dia.

17-134 -Ditto-but 75.00 mm dia 6191.00 479.00 239.00

17-135 -Ditto-but 100.00 mm dia 9524.00 639.00 319.00

17-136 -Ditto-but 150.00 mm dia 11112.00 958.00 479.00

17-137 -Ditto-but 200.00 mm dia 14890.00 1257.00 629.00

Butterfly valve water quality high pressure with handle

17-134Acomplete incl nuts bolts, flanges and gasket, 75.00 mm 4460.00 503.00 251.00
dia

17-135A -Ditto-but 100.00 mm dia 5552.00 629.00 314.00

17-136A -Ditto-but 150.00 mm dia 7082.00 838.00 419.00

17-137A -Ditto-but 200.00 mm dia 10140.00 1257.00 629.00

SLUICE VALVE PIT (RCC/Bricks)

All type valve pits as required Rate is to be taken from various section of civil works
as per design and specification as per requirement

291
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
Rate in Taka

Materials and Add if fixed

NON-RETURN VALVE (water quality) Fixing only
Labour in r/r

Each
17-138 Non return valve water quality high pressure both way
complete with nut and bolts including gasket for 50.00
mm diameter. 4,033.00 479.00 239.00

17-139 -Ditto-but 75.00 mm dia 5,716.00 639.00 319.00

17-140 -Ditto-but 100.00 mm dia 8,254.00 639.00 319.00

17-141 -Ditto-but 150.00 mm dia 13,651.00 958.00 479.00

17-142 -Ditto-but 200.00 mm dia 17,758.00 1,257.00 629.00

DRESSER JOINT(CI)

Each
17-143 Dresser joint with bolts gasket etc complete 75.00 mm 826.00 191.60 96.00
dia

17-144 -Ditto-but 100.00 mm dia 1,001.00 239.50 120.00

17-145 -Ditto-but 150.00 mm dia 1,208.00 319.00 160.00

17-146 -Ditto-but 200.00 mm dia 1,906.00 319.00 160.00

CHECK VALVE

Each
17-147 Check valve made of brass/gun metal water quality
25.00 mm dia 681.00 191.60 96.00

17-148 -Ditto-but 37.50 mm dia 991.00 191.60 96.00

17-149 -Ditto-but 50.00 mm dia 1,449.00 191.60 96.00

17-150 -Ditto-but 75.00 mm dia 3,747.00 383.00 192.00

292
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-151 -Ditto-but 100.00 mm dia 5,968.00 383.00 192.00

293
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

SHOWER BATH Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r
17-152 Shower bath CP complete best and approved quality
for 12.50 mm dia pipe line 555.00 63.90 31.90

17-153 -Ditto-but 18.70 mm dia 603.00 63.90 31.90

17-154 -Ditto-but moving type 12.50 mm dia 876.00 63.90 31.90

17-155 -Ditto-but telephone type shower rose 12.50 mm dia

966.00 127.70 64.00

LEAD / PLASTIC CONNECTION

Each
17-156 Lead (plastic pipe) connection with brass union on both
end 12.50 mm 169.00 47.90 24.00

17-157 - Ditto - but 18.70 mm 175.00 47.90 24.00

BIB COCKS - Brass bright

Each
17-158 Bib / push cock plug round way low pressure with
galvanized iron, brass lever handle and shouldered
lever handle and tail screwed for iron pipe and fixed 547.00 52.70 26.00
size 12.50 mm.

17-159 - Ditto - but 18.70 mm 592.00 52.70 26.00

294
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

BIB COCKS - CP Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r

17-160 Bib cock chromium plated low pressure polished body

special type approved quality size 12.50 mm, 100 mm 789.00 52.70 26.00
long.

17-161 - Ditto - but 18.70 mm 831.00 52.70 26.00

17-162 Double knob mixture cock 12.50 mm for use in sink
and fixed. 2640.00 65.90 33.00

17-163 - Ditto - but 18.70 mm 2760.00 65.90 33.00

17-164 Bib / push cock chromium plated high pressure
polished body special type approved quality size 12.50 954.00 65.90 33.00
mm, 150 mm long.

17-165 - Ditto - but size 18.70 mm 1007.00 65.90 33.00

17-166 - Ditto - but size 12.50 mm, 200 mm long. 954.00 65.90 33.00

17-167 - Ditto - but size 18.70 mm 1,005.00 65.90 33.00

17-168 Bib cock plastic (PVC) best and approved quality size
12.50 mm 93.00 32.90 16.50

17-169 - Ditto - but size 18.70 mm 109.50 37.60 19.00

STOP COCKS
Each
17-170 Stop cock brass bright high pressure screwed for iron
pipe or for brass ferrule and fixed size 12.50mm 335.00 52.70 26.00

17-171 - Ditto - but size 18.70 mm 364.00 52.70 26.00

17-172 - Ditto - but size 25.00 mm 539.00 65.90 33.00

17-173 - Ditto - but chromium plated (concealed) 12.50 1,138.00 65.90 33.00
mm

17-174 - Ditto - but size 18.70 mm 1,238.00 65.90 33.00

17-175 - Ditto - but surface type 12.50 mm 802.00 65.90 33.00

295
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
17-176 - Ditto - but surface type 18.70 mm 954.00 65.90 33.00

296
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
PILLAR COCKS Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r

17-177 Pillar cock special type screwed down high pressure

lettered "HOT or COLD" complete with long crewed
shanks, fly nuts etc as required approved quality size 1056.00 65.90 33.00
12.50 mm single knob

17-178 - Ditto - but double knob, mixer cock 2541.00 65.90 33.00

VALVE PEET / GATE

Each
17-179 Valves peet (Gate) pattern strong gun metal high
pressure "Full way " valves with iron wheel head
345.00 65.90 33.00
screwed both ends for iron pipe and fixed complete
size 12.50 mm

17-180 - Ditto - but 18.70 mm 421.00 65.90 33.00

17-181 - Ditto - but 25.00 mm 596.00 88.00 44.00

17-182 - Ditto - but 37.50 mm 957.00 131.70 66.00

17-183 - Ditto - but 50.00 mm 1,464.00 131.70 66.00

17-184 - Ditto - but 75.00 mm 4,099.00 164.60 82.00

17-185 - Ditto - but 100.00 mm 6,800.00 263.40 132.00

PRESSURE REDUCING VALVE Materials and Labour

Light Model Add if fixed

Heavy Model
RINOX2 Fixing only
RINOX working in r/r
Each working
pressure 360
pressure 220
PSI
PSI

17-185A Supply and fixing of pressure reducing

valve (brand Itap, Italy) 37.5 mm dia 9355.00 9,973.00 319.00 160.00

17-185B - Ditto - but 25 mm 4675.00 5,333.00 273.70 137.00

17-185C - Ditto - but 20 mm 2485.00 4,701.00 239.50 120.00

297
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
17-185D - Ditto - but 12.50 mm 2116.00 3,896.00 191.60 96.00

298
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
VALVE FLOAT Rate in Taka
Materials and Add if fixed
Each Labour
Fixing only
in r/r
17-186 Float valves brass or gun metal as approved by the
Engineer-in-Charge complete with all accessories as 499.00 43.90 22.00
required with copper (crydon) ball size 12.50 mm

17-187 - Ditto - but 18.70 mm 665.00 65.90 33.00

17-188 - Ditto - but 25.00 mm 923.00 65.90 33.00
17-189 - Ditto - but 37.50 mm 1,046.00 87.80 44.00
17-190 - Ditto - but 50.00 mm 1,114.00 131.70 66.00
17-191 - Ditto - but with plastic ball size 12.50 mm 488.00 43.90 22.00
17-192 - Ditto - butt 18.70 mm 587.00 65.90 33.00
17-193 - Ditto - but 25.00 mm 623.00 65.90 33.00
17-194 - Ditto - but 37.50 mm 875.00 87.80 44.00
GI WATER TANK Rate in Taka
Materials Making Add if fixed
Each and Labour charge
Fixing only
in r/r
17-195 GI water tank 1600 litre capacity complete
with top cover and locking arrangement ######## 3,832.00 758.00 252.00
made with 16 BG plain sheet as required.
17-196 - Ditto - made with 18 BG plain
######## 3,832.00 758.00 252.00
sheet
17-197 GI water tank 800 litre capacity complete
with top cover and locking arrangement
made with 16 BG plain sheet as required. ######## 1,916.00 455.00 152.00

17-198 - Ditto - made with 18 BG plain 9,615.00 1,916.00 455.00 152.00

sheet
17-199 Ferro cement water tank 1800 litre capacity
complete with top cover and locking
arrangement made by as per specification ######## 3,832.00 2,874.00 1,277.00
of latest Engineering practice.
17-199 A PVC / Plastic food grade water Tank
approved brand, capacity 300 Litre. 3,952.00 - 539.00 269.50

17-199 B - Ditto - but 500 litre 6,227.00 - 539.00 269.50

17-199 C - Ditto - but 1000 litre ######## - 718.00 359.00
17-199 D - Ditto - but 1500 litre 18,141.00 - 1,078.00 539.00

299
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

FLANGE JOINTS

Materials and Add if fixed

Pair Labour
Fixing only
in r/r

17-200 Flanges GI complete with nut, bolts and washers for

50.00 mm dia GI water line approved quality 497.00 239.50 120.00

17-201 - Ditto - but 75.00 mm dia 883.00 239.50 120.00

17-202 - Ditto - but 100.00 mm dia 1461.00 383.00 192.00

17-203 - Ditto - but 150.00 mm dia 1700.00 383.00 192.00

17-204 - Ditto - but 200.00 mm dia 1,880.00 383.00 192.00

HAND TUBE WELL Rate in Taka

Per Metre Bore of pipe (in mm)

37.50 mm 50.00 mm 75.00 mm

17-205 Boring/sinking of hand tube well with required tools

and equipment up to the depth of 30 meter as per
direction of Engineer-in-Charge for installation of tube 208.00 240.30 263.40
well (Tube well materials is to be paid separately)

17-206 -Ditto-but depth above 30 metre 228.00 264.00 290.00

Complete installation (Lowering) tube well fixture i.e.

17-207 52.00 52.00 52.00
blind pipe, strainer (Filter) etc.

Successful removal (Lifting) complete tube well

17-208 128.00 128.00 128.00
fixture.

300
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
HAND PUMP
Materials and Add if fixed
Each Labour
Fixing only
in r/r
17-209 Hand pump no. 6 complete with all accessories i.e.
handle, plunger, head, bucket, base etc approved
quality. (Extra fittings if required for maintenance work 3,381.00 639.00 319.00
only)

17-210 Handle for hand pump no. 6 536.00 65.90 33.00

17-211 Base plate for hand pump. 551.00 131.70 66.00

17-212 Plunger for hand pump 231.00 109.80 55.00

17-213 Head cover for hand pump 583.00 109.80 55.00

17-214 Seat valve for hand pump 79.00 52.70 26.00

17-215 Bucket for hand pump (leather) 97.00 52.70 26.00

STRAINER / FILTER (Hand

Rate in Taka
tube well)

Per Metre Bore of pipe in mm Add if fixed

Fixing only
37.50 40 in r/r
50.00 mm 75.00 mm
mm
17-216 Strainer / filter made with
brand new GI water tubing best
and approved quality brass / 1,138.00 1,271.00 0.00 90.00 45.00
copper netting for tube well.

17-217 - Ditto - but PVC Strainer 177.00 213.00 0.00 43.90 22.00

301
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
PUMPING SET (Centrifugal) Rate in Taka

Add if fixed
Each set Materials and Labour Fixing only
in r/r

17-218 Centrifugal pumping set single / multistage, as

required suction / delivery mains, approved quality
local/foreign made having capacity to lift, 60-100
LPM static head 15-18 metre single phase 220/230
volt 50 Hz. 0.75/1 HP motor, starter, check valve
54,361.00 ###### 569.00
and connection cables including testing and
commissioning.

17-219 - Ditto - but 100-120 LPM static head 15-18 metre

single phase 220 / 230 volt 50 Hz. 1.5 HP motor,
starter, check valve and connection cables including 65,481.00 ###### 659.00
testing and commissioning.

17-220 - Ditto - but 200-300 LPM static head 15-18 metre

single phase 220 / 230 volt 50 Hz. 2 HP motor,
starter, check valve and connection cables including 73,260.00 ####### 988.00
testing and commissioning.

17-221 Submersible type pumping set complete with

electric Motor SP 220 Volts 50 Hz, Brand
CALAMA having lifting head 78-45 M capacity 2.4- 104,095.00 ####### 988.00
4.5 M3/hr, Model no. Gold 3/17+2 HP

17-222 Centrifugal pumping set (KSB/ Milnars) single/

multistage, as required suction/delivery mains,
complete with local / foreign origin Horizontal
Induction Motor electric 3 HP AC 3 ph 400 volt
50 hz 1400/2900 rpm, Star-Delta starter, Check
valve conneting cables etc. having capacity to lift, 59,447.00 ####### 1,317.00
180-20 LPM of water against static head 25-55
metre including testing, trial run and
commissioning.

17-223 - Ditto - but 300-400 LPM against working static

water head not less than 25 metre complete with
1450 / 2900 RPM 5 HP 3 phase 380 / 400 volt 50 79,103.00 ####### 2,215.00
Hz. Horizontal induction Motor

17-224 Submersible type pumping set complete with

electric motor 3 ph, Brand CALAMA, head 50 - 27
M capacity 12-20 M3 / hr, Model no Gold 5/13.2 52,765.00 ####### 2,215.00
+ 5 HP.

302
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
PUMPING SET (Centrifugal) Rate in Taka
Add if fixed
Each set Materials and Labour Fixing only
in r/r
17-225 Centrifugal pumping set with Motor electric
complete as above item no. 17-218 but 600-750
LPM against working static water head not less
than 25 metre complete with 1450 / 2900 RPM 7.5 142,495.00 5,029.00 2,515.00
HP 3 phase 380 / 400 volt 50 Hz. - Ditto -

17-226 Centrifugal pumping set with Motor electric

complete as 900-1150 LPM against working static
water head not less than 35 metre complete with
1450 / 2900 RPM 10 HP 3 phase 380/400 volt 50 147,416.00 ####### 2,515.00
Hz. - Ditto -

17-227 KSB (India) Brand, Centrifugal Pump only, 1450

rpm Model Mega G 40-315, rated HP 10, Head 40 -
20 M, Discharge "Q" 9 - 31 m3/hr, Suction 65 mm 62,308.00 ####### 1,257.00
Delivery 40 mm Complete.

17-228 Centrifugal pumping set having capacity 1100-1350

LPM against working static water head not less
than 35 metre complete with 1450 / 2900 RPM 15
HP 3 phase 380 / 400 volt 50 Hz Horizontal 177,299.00 ####### 2,515.00
Induction Motor.

17-229 KSB (India) Brand, Centrifugal Pump only, 2900

rpm Model Mega G 40-200, rated HP 15/16, Head
60 - 24 M, Discharge "Q" 16 - 62 m3/hr, Suction 64,699.00 ####### 1,557.00
65 mm Delivery 40 mm Complete.

17-230 Centrifugal pumping set having capacity 1300-1500

LPM against working static water head not less
than 35 metre complete with 1450 / 2900 RPM 20
HP 3 phase 380 / 400 volt 50 Hz Horizontal 202,256.00 ####### 2,515.00
Induction Motor.

17-231 Centrifugal Pumping set KSB (India) 1450 rpm

model Mega GM 125-250, rated HP 25, Head 23-9
metre, Discharge "Q" 100-350 m3 / hr, Suction 150
mm Delivery 125 mm with Horizonal Induction
Electric Motor AC 400 volt, 3 phase, 50 Hz, Brand
GEC / China / Crompton including Star-Delta auo 226,225.00 ####### 3,233.00
starter, Check Valve, connecting cables, lugs,
flexible Pipe etc. complete installation and Testing
commissioning.

303
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
Add if fixed
Each set Materials and Labour Fixing only
in r/r
17-232 Centrifugal Pumping set KSB (India) 1450 rpm
model Mega GM 80-315, rated HP 30, Head 40-23
3
metre, Discharge "Q" 50-160 m / hr, Suction 125
mm Delivery 80 mm with Horizonal Induction
Electric Motor AC 400 volt, 3 phase, 50 Hz, Brand
GEC / China / Crompton including Star-Delta auto 314,364.00 ####### 4,490.00
starter, Check Valve, connecting cables, lugs,
flexible Pipe etc. complete installation and Testing
commissioning.

17-233 Centrifugal Pumping set KSB (India) 1450 rpm

model Mega GM 80-400, rated HP 40/42, Head 56-
3
30 metre, Discharge "Q" 60-170 m / hr, Suction
125 mm Delivery 80 mm with Horizonal Induction
Electric Motor AC 400 volt, 3 phase, 50 Hz, Brand
394,352.00 ####### 4,790.00
GEC / China / Crompton including Star-Delta auto
starter, Check Valve, connecting cables, lugs,
flexible Pipe etc. complete installation and Testing
commissioning.

SUBMERSIBLE PUMPING
Rate in Taka
SET (Deep tube well)

Add to for Add / deduct

Materials Installation / Add to if beyond 30 metre
Each Set and Labour Fixing removal
cleaning / column length
checking (Rate per metre)

17-234 Bore well type submersible

pumping set having capacity 12-
18 M3 against water head 110 - 30
metre at 2900 rpm powered with 3
ph, 50 hz, 400 volt, AC
primeover (Motor) 6 HP complete
as per manufacturer's specification
including 50 mm dia column /
riser pipe 30 metre in length with
285,344.00 3,652.00 1,826.00 2,739.00 3,008.00
starter, marine cable, butter fly
valve etc. as required size and
capacity. Brand : KSB (India),
Model : CORA 100-18/14 or 100-
7c/22 + UMA/UMT 100-4.5/22

304
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

SUBMERSIBLE PUMPING
Rate in Taka
SET (Deep tube well)

Add to for Add / deduct

Materials Installation / Add to if beyond 30 metre
Each Set and Labour Fixing removal
cleaning / column length
checking (Rate per metre)

17-235 Bore well type submersible pumping

set, size as per manufacturer, head
70-15M capacity 0.60-0.90 cusec,
Brand KSB (India), Model no BPD-
242/7+ UMA 150-8/22 or BPD-
273/6+ UMA 150-8/22 or BPD-
302/4+ UMA 150-8/22 or BPH- 220,745.00
4,251.00 2,125.00 3,188.00 -
333/2+ UMA 150-8/22, or any other
model appropriate for 10 HP (3
ph)

17-236 Bore well type submersible pumping

set, size as per manufacturer, head
20-48M capacity 0.45-0.10 cusec,
Brand KSB (India), Model no BPD-
273/8+ UMA 150-13/21 or BPD-
302/6+ UMA 150-13/21 or BPD-
302/7+ UMA 150-13/21 or BPH-
333/2+ UMA 150-13/22 or BPH- 300,015.00 4,251.00 2,125.00 3,188.00 -
384/2+ UMA 150-13/21, 15 HP (3
ph)

305
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
17-237 Bore well type submersible pumping
set, size as per manufacturer, capacity
0.15-1.10 cusec against water head
80-24 metre, as per manufacturer, 20
HP Brand : KSB (India), Model :
BPD-302/8 + UMA 150 -21/21 or
BPD-273/10 + UMA 150 -21/21 or
BPH-333/3 + UMA 150 -21/21 or 337,913.00 5,628.00 2,814.00 4,221.00 -
BPH-333/3 + HB - 303 or BPH
384/2 + HB 303

306
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
SUBMERSIBLE PUMPING SET
Rate in Taka
(Deep tube well)

Add to for Add / deduct

Materials Installation / Add to if beyond 30 metre
Each Set cleaning / column length
and Labour Fixing removal
checking (Rate per metre)

17-238 Bore well type submersible pumping

set, size as per manufacturer, capacity
0.10-1.10 cusec against water head
125-30 metre, size as per
manufacturer, Brand : KSB (India),
Model : BPD 273/12 + UMA 150-
24/21 or BPD 302/10 + UMA 150-
24/21 or BPH 333/4 + UMA 150- 389,043.00 5,628.00 2,814.00 4,221.00 -
24/21 or BPH 384/2 + HB-253 or
BPH 384/3 + UMA 150-24/21or
other model for 25 HP

17-239 Bore well type submersible pumping

set, size as per manufacturer, capacity
0.4-1.95 cusec against water head 75-
15 metre, Brand : KSB (India),
Model : BPH 333/4 + HB 303 or
BPN 274/2 + HB 303 or BPH 425/1
458,853.00 5,628.00 2,814.00 4,221.00 -
+ HB-303 or BPH 384/3 + HB 303
or other model for 30 HP

17-240 Bore well type submersible pumping

set, size as per manufacturer, capacity
0.4-1.80 cusec against water head
115-30 metre, Brand : KSB (India),
Model : BPH 333/5 + HB 413 or
BPN 373/3 + HB 413 or BPN 394/2
+ HB-413 or BPH 384/4 + HB 413 554,887.00 7,544.00 3,772.00 5,658.00 -
or other model for 40/41 HP

307
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
SUBMERSIBLE PUMPING
Rate in Taka
SET (Deep tube well)
Add to for Add / deduct
Materials Installation / Add to if beyond 30 metre
Each Set and Labour Fixing removal
cleaning / column length
checking (Rate per metre)

17-241 Bore well type submersible

pumping set, size as per
manufacturer, capacity 0.6-1.4
cusec against water head 120-
45 metre, with prime over
(Motor) 50/52 HP Brand :
KSB (India), Model : BPH 744,559.00 7,544.00 3,772.00 5,658.00 -
384/4 + HB 523 or BPH
384/5 + HB 523 or BPH
384/3 + NB 523

17-242 Bore well type submersible

pumping set, size as per
manufacturer, capacity 0.65-
1.4 cusec against water head
103 -60 metre, with prime over
(Motor) 60/62 HP Brand :
843,945.00 7,544.00 3,772.00 5,658.00 -
KSB (India), Model : BPN
374/4 + NB 623 or BPN 425/2
+ NB 623

17-243 Bore well type submersible

pumping set, size as per
manufacturer, capacity 0.65-
1.4 cusec against water head
103 -60 metre, with primeover
(Motor) 75 HP Brand : KSB
955,425.00 11,256.00 5,628.00 8,442.00 -
(India), Model : BPN 374/4 +
NB 753 or BPN 425/2 + NB
753

308
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
TURBINE PUMPING SET (Deep tube
well)
Deep tube well turbine pumping set, suitable for the tube well as per actual requirement
consisting of the following items :
Rate in Taka
Multi stage pump set, workable Add to for
Materials Installation / Add to if
against static water head 25 to Unit and Labour Fixing removal
cleaning /
65 meter at 1450 RPM, having checking

17-244 100 / 75 mm dia 450-600

liter per minute capacity
Per Stage 17,746.00 323.00 193.80 129.20
Model B7B

17-245 125 / 125 mm dia 900-

1200 liter per minute Per Stage 24,566.00 388.00 232.80 155.20
capacity Model B8B

17-246 150 / 125 mm dia 1200-

1350 liter per minute Per Stage 24,122.00 323.00 193.98 155.20
capacity Model B8D

17-247 200 / 150 mm dia 1500-

1700 liter per minute
Per Stage 40,579.00 671.00 403.00 129.20
capacity B10B

17-248 150 / 125 mm dia 2475 -

2625 liter per minute
Per Stage 39,148.00 671.00 403.00 268.00
capacity B10D

Column pipe 3.04 metre in

Add to for
length, wall thickness as spd Materials Installation / Add to if
Unit and Labour Fixing removal
cleaning /
complete with column shaft, checking
bush and socket etc:

17-249 75 mm dia 4 mm thick Metre 8107.00 215.50 129.30 86.20

17-250 100 mm dia 4.5 mm thick Metre 10358.00 215.50 129.30 86.20

17-251 125 mm dia 4,85 mm thick Metre 12753.00 216.00 129.30 86.40

17-252 150 mm dia 4.85 mm thick Metre 13671.00 223.50 134.10 89.40

17-253 200 mm dia 7.04 mm thick Metre 20109.00 231.50 138.90 92.60

309
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

Both ends flanged type MS column

pipe API-5L grade-B with special
17-253Acable groove, nut bolts , gaskit Metre 5031.00 245.00 123.00 -
including anti corrosive painting:size :
150 mm dia

17-253B -Ditto- but 100 mm dia Metre 3575.00 245.00 123.00 -

17-253C -Ditto- but 75 mm dia Metre 2899.00 194.00 97.00 -

17-253D -Ditto- but 50 mm dia Metre 2067.00 194.00 97.00 -

Discharge head complete with

Add to for
priming funnel and pressure Materials Installation / Add to if
Unit and Labour Fixing removal
cleaning /
meter gauge, for the pumping checking
set of :

17-254 100 / 75 mm dia Each 30127.00 2586.00 1551.60 1034.40

17-255 100 mm dia Each 30725.00 2586.00 1551.60 1034.40

17-256 125 mm dia Each 33719.00 2586.00 1551.60 1034.40

17-257 150 mm dia Each 35012.00 2682.00 1609.00 1073.00

17-258 200 mm dia Each 39898.00 2778.00 1667.00 1111.00

Vertical hollow shaft Induction Motor AC 380/400 volt, 50 Hz 3 phase, 1450/2900 RPM
suitable for the driving of selected pumping set with the above mentioned accessories as
required including starter, and connecting cables having the capacity of

Add for
GEC / Other Installation / Add to if
SIEMENS brand Fixing removal
cleaning /
checking

17-259 10 HP 205,349.00 69,367.00 2,682.00 1341.00 1609.00

17-260 15 HP 207,659.00 82,485.00 2,682.00 1341.00 1609.00

17-261 20 HP 243,568.00 93,082.00 3,065.00 1532.50 1839.00

17-262 30 HP 393,807.00 146348.00 4023.00 2012.00 2414.00

310
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-263 40 HP 479,054.00 210840.00 4023.00 2012.00 2414.00

17-264 50 HP 580,669.00 0.00 4023.00 2012.00 2414.00

17-265 60 HP 621,883.00 0.00 4023.00 2012.00 2414.00

311
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
DEEP TUBE WELL
Per Job Rate in Taka
17-266 Transportation / Mobilization of boring equipments,
plants and materials to and from work site as required. 110,163.00

Lowering of 37.50 mm dia GI tube for

TEST TUBE WELL Test tube collection of water
well Boring
charges Tubewell fixture
Rate Per Metre (Per metre)
Water Test (Per sample)

17-267 Excavation / boring of exploratory / test

bore hole with 37.50mm dia. GI tubing
upto the depth as per order of Engineer-in-
359.00 162.10 10,777.00
charge and collection of fresh water
including laboratory test.

DEEP TUBE WELL Bore dia up to 750 mm Bore dia over 750 mm
(Rate per Metre) (Rate per cu.m)
Per Metre / per cu.m

Drilling / excavation of bore hole minimum

500mm diameter either by rotary or
percussion or any other engineering
method upto a required and designed depth
for the installation of 400x200 / 350x150 /
300x150 / 300x100 / 250x75 mm
production deep tube well.

17-268 For 0-50 metre depth 2,926.00 6,626.00

17-269 For above 50 to 125 metre depth 3,203.00 7,254.00

17-270 For above 125 to 200 metre depth 3,459.00 7,834.00

17-271 For above 200 metre up to the required
depth 3,701.00 8,382.00

Supply at site MS/GI bail plug 1.5 M

Rate in Taka
length
17-272 200 mm diameter 7,294.00

17-273 150 mm diameter 3,987.00

17-274 100 mm diameter 3,367.00

312
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

17-275 75 mm diameter 2,377.00

313
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
DEEP TUBE WELL Rate in Taka
uPVC Strainer
having wall
Stainless Steel Brass Strainer
Per Metre Strainer (SS) (BS)
thickness as
specified in
section-29

Supply at site strainer foreign origin,

having minimum wall thickness 2.75 mm
17-276 200 mm diameter 25,379.00 - 3,071.00 -

17-277 150 mm diameter 18,367.00 - 2,155.00 -

17-278 100 mm diameter 12,356.00 - 1,018.00 -

17-279 75 mm diameter 9,579.00 - 659.00 -

Per Metre Rate in Taka

Supply and installation of extra MS casing
/ housing pipe having 4 mm wall thickness,
17-280 6,941.00
600 mm dia required for tube well as per
drawing design.
17-281 - Ditto - but 650 mm diameter - 7,703.00 - -

17-282 - Ditto - but 700 mm diameter - 9,254.00 - -

Supply at site deep tube well casing /

17-283 housing pipe having 8 mm wall thickness - 10,442.00 - -
approved quality, 400 mm dia.

Supply at site deep tube well casing /

17-284 housing pipe having 10 mm wall thickness - 13,021.00 - -
approved quality, 400 mm dia.

Supply at site deep tube well casing /

17-285 housing pipe having 6.35 mm wall 7,304.00
thickness approved quality, 400 mm dia.

17-286 350 mm diameter 6,466.00

17-287 300 mm diameter 5,987.00

250 mm diameter 5,448.00

17-287A
Rate is to be taken from section 25 or previous item
GI blind pipe
duly deducting fixing charge

314
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
DEEP TUBE WELL Rate in Taka
Each

Supply at site MS reducer having wall

thickness 6.35mm as required length.

17-288 400x200 mm diameter 10,178.00

17-289 350x150 mm diameter 7,664.00

17-290 300x150 mm diameter 7,185.00

17-291 300x100 mm diameter 6,586.00

17-292 250x75 mm diameter 5,987.00

17-293 Supply at site centraliser made
by 12.50mm round bar. 808.00

Per cubic metre

17-294 Supply at site well graded gravels approved quality for
filling / surrounding the tube well 3,952.00

Per Metre
17-295 Complete installation of deep tube well fixture i.e.
housing, blind pipe, bail plug, strainer, reducer gravel
760.00
etc. including welding both SS and MS.

Per Job
17-296 Cleaning and developing of tube well by Air lifting
system or any Other than NTL method till the water is
found free from sand but not less then 50 hours
continuous pumping including measuring of water 45,083.00
table, yield, draw down etc. and preparation of 3 copies
test and development result for records.

17-297 Water quality test (4x sample) from any Govt.

laboratory and obtained fitness certificate from
34,725.00
authorised Govt. authorities.

315
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

Electric connection including Rate is to be taken from similar item of works of sec 21
-
control and protective devices & 22

Rate is to be taken from similar item of works of sec 21

- Fire protection equipments
& 22

316
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

Starter for Motor Rate in Taka

Materials and Add if fixed
Each Labour
Fixing only
in r/r

17-298 Star delta push button starter with

automatic tripping arrangement suitable for
the control and operation 380 / 400 volt,
50 Hz, 3 phase, induction motor having 6,900.00 671.00 335.50
capacity upto 7.5 - 15 HP

17-299 -Ditto- but 20 to 30 HP 15,617.00 766.00 383.00

17-300 -Ditto- but 40 to 50 HP 19,210.00 ####### 503.00

17-301 -Ditto- but above 50 HP 25,197.00 ####### 503.00

17-302 Panel Box (275x125x175 mm) type Auto
Starter Complete with 1xMCB, 1xAmMetre
with ASS, 1xVolt Metre with VSS, 3xPh
indicator, 1xpneumatic timer, 2xPush button,
indicator lamp for ON/TRIP, Thermal over
load relay for protection against phase failure, 45,784.00 ####### 599.00
phase reverse and dry run complete with cables
and lugs having rating for 5 / 6 HP motor
foreign made

17-303 - Ditto - but (size 450x350x200) for 30

HP motor 90,236.00 ####### 749.00

17-304 - Ditto - but (575x500x200 mm) for

41 HP motor 107,064.00 ####### 928.00

17-305 - Ditto - but (625x500x200 mm) for

52 HP motor 123,348.00 ####### 928.00

17-306 - Ditto - but (625x500x200 mm) for

62/75 HP motor 156,623.00 ####### 928.00

17-306ASubmersible marine cable flat 3 core size

4mm suitable for the operation of 380 /
562.00 21.00 10.00
400 volt, 50 Hz, 3 phase, submersible
motor.

317
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
17-306B - Ditto - but size 6 mm 847.00 21.00 10.00
17-306C - Ditto - but size 10 mm 1,228.00 21.00 10.00
17-306D - Ditto - but size 16 mm 1,808.00 30.00 15.00
17-306E - Ditto - but size 25 mm 2,291.00 30.00 15.00

318
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description
Water heater (Geyser) Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r
17-307 Water heater electric, AC 220/230 volt, 50 Hz, having
capacity upto 45 litre complete local made, approved
quality. 9,400.00 ####### 569.00

17-308 Water heater electric, AC 220/230 volt, 50 Hz, having

capacity 45.00 to 70.00 litre local made, approved 10,896.00 ####### 659.00
quality.

17-309 -Ditto-but 70.00 to 90.00 litre 12,286.00 ####### 748.00

17-310 -Ditto-but gas operated 22,452.00 ####### 748.00

17-311 Water heater 1000/2000 watt (USA/Italy) electric, AC

220/230 volt, 50 Hz, having capacity upto 90.00 to
19,219.00 ####### 928.00
115.00 litre local made, approved quality.

17-312 -Ditto-but gas operated 26,607.00 ####### 928.00

-Ditto-but 115.00 to 140.00

17-313 29,577.00 ####### 1,018.00
litre
-Ditto-but 140.00 to 230.00
17-314 45,975.00 ####### 1,093.00
litre

17-315 Pressure relief valve (Water heater) 2,036.00 132.00 66.00

17-316 Gas thermocouple (Water heater) 2,527.00 132.00 66.00

17-317 Element for Water heater 2,766.00 131.70 66.00

Supply and fixing of angle stop cock 12.5 mm CP local

17-318 830.00 87.80 44.00
made best qty.
17-319 Supply and fixing of push / commode hand shower
12.5 mm for toilet use complete in all respect approved 736.00 164.60 82.00
brand
New Item
17-164ATwin bib Cock Chromium
Plated 12.50 mm 1,475.00 66.00 33.00

319
RESTRICTED
 RESTRICTED
SECTION-17
WATER SUPPLY AND PLUMBING
Item Description

Rate in Taka

Materials and Add if fixed

Each Labour
Fixing only
in r/r

17-155 (A) Bath Tub Mixer (With shower) Type 12.50 mm.
(Local Made) 5,049.00 91.80 46.00

17-155 (B) Single Laver Bath Tub Mixer (With hand shower)
Type 12.50 mm. (Local Made) 5612.00 91.80 46.00

17-155 (C) Single Laver conceal Shower Mixer set Type 12.50
mm. (Local Made) 5612.00 91.80 46.00

17-162(A) Moving sink Cock (Left /Right) 12.50 mm

1581.00 47.90 24.00

17-162(B) Single knob sink mixer special size 12.50 mm

5065.00 47.90 24.00

17-177(A) Pillar Cock Moving Type Single Knob 12.50 mm

1644.00 4790.00 24.00

17-178(A) Pillar Cock Special Type Single Knob Basin Mixer

12.50 mm 4466.00 4790.00 24.00

17-319(A) S/F Push / commode hand shower 12.50 mm for toilet

use approved brand. 683.00 119.70 60.00

320
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
DRAIN PIPES CEMENT CONCRETE PIPES MACHINE MADE
Rate in Taka
Materials & Labour
Bore of pipe, mm
Per metre 100 150 225
18-1 Reinforced cement concrete pipes, non-
pressure, laid & jointed in cement mortar
476.00 573.00 974.00
with collars as specified (Machine Made)

18-2 - Ditto - but except pipes, collar and

fittings. 243.30 244.00 460.00

Except pipes,
Materials &
Each collars,
Labour fittings
18-3 Extra to Last item for Tee 150 mm bore
501.00 90.00
Rate in Taka
SOIL, WASTE AND VENTILATION PIPES Materials & Labour
Bore of pipe, mm
Per metre 50 100 150
18-4 Cast iron soil, waste & vent pipes fixed as
spd. 1016.00 1855.00 2090.00

18-5 - Ditto - but except pipes, collar and

fittings. 70.00 92.00 101.80

EXTRA OVER PIPES AND FITTINGS (CI) Bore of pipe, mm

Each 50 mm 100 mm
18-6 Bends Plain, tapers, double socket & oval pattern
accessories, with gun metal bolts & rubber joints as 420.00 566.00
required.
18-7 Door bend - ditto - 424.00 563.00

18-8 Tee (Plain Type) - ditto - 402.00 879.00

18-9 Tee (Door Type) - ditto - 442.00 967.00

EXTRA OVER PIPES AND FITTINGS (CI) Materials & Add if fixed
Each Labour in repair

336
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
18-10 Branch pieces 100mm bore (Double Branch) equal or
unequal arms, ordinary or inverted, swan neck offsets
9320.00 150.00
exc 75mm but n.exc 300 mm projection

18-11 Cast iron floor trap 100 mm bore fixing in position

with all requirement. 1082.00 150.00

337
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
Rate in Taka
GUARD COWL (STOUT) CAST IRON
Bore of pipe
Add if fixed
in repair
Each 50mm 100mm

18-12 Over outlet of down pipes or tops of

ventilating pipes etc fixed complete dome
276.00 433.00 75.00
or balloon pattern

MANHOLE COVER (HEAVY Materials & Labour Taking up or

TYPE) Inside clear diameter down &
removing to
Each 375 mm 450 mm 525 mm store

18-13 Cast iron manhole cover set in

cement mortar including
1473.00 1700.00 2561.00 150.00
hunching in concrete

TESTING DRAINS
Each Rate in Taka
18-14 Provide water and temporary apparatus and test drains
till perfect (0.60 to 1.83 metre head) 191.60

18-15 Provide water and temporary apparatus and test

manhole full depth of manhole but not exc. 1.83 1,197.00
metre.

18-16 Provide apparatus, materials, labour etc & smoke test

till perfect , soil waste, ventilating pipes & connecting
599.00
drain to nearest manhole

Rate in Taka
Distance between
SURFACE GULLIES manholes
Exc 30
N. exc 30 metre but
Each
metre not exc 92
metre

18-17 Clearing drains by Roding & well flushing. 494.00 988.00

Per Cubic metre Rate in Taka

338
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
18-18 Clearing of night soil (Solid or liquid) from septic
tank, manhole etc including disposing off or burying
653.00
up as per direction (beyond 100 metre distance)

339
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
Rate in Taka

MANHOLES Type of walls & thickness

250mm 150mm
Per Cubic metre
brick RCC
18-19 Manhole complete rectangular or circular as described
n. exc 0.60 meter depth from invert to surface of cover
including main channel set in CM (1:4) 26941.00 29427.00

18-20 Manhole exc 0.60 metre but n. exc 1.83 metre depth
with iron steps (with 20 mm dia MS bar and size
370x150 mm @ 300 mm c/c) Manhole more than 1.83
metre to top of manhole cover will be measured in 18015.00 20572.00
details under respective sections.

Rate in Taka

AC PIPE Bore of pipes in mm Add if fixed in repair

Per metre 100 75 100 75

18-21 Supply and fixing of AC down

pipes as specified 314.00 240.60 89.80 71.80

PVC PIPE Bore of pipe & wall thickness in mm or grade.

38/40x2
Per metre 50x2.4 mm 75x2.5mm 100x3.4 mm
mm
18-22 Supply and fixing of PVC non-
pressure down pipe or used under
floor / concrete or in any other
places as required and jointed as per
269.00 351.00 571.00 770.00
specification (Excavation of trenches
will be paid separately).

18-23 Fixing only 79.00 105.40 131.70 158.10

18-24 Add fixed in R/R 20.00 26.00 32.90 40.00

340
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
PVC PIPE Bore of pipe & wall thickness in mm or grade.

Per metre 150x4.5mm 200x5.5mm 250x10mm -

18-25 Supply and fixing of PVC non-

pressure down pipe or used under
floor / concrete or in any other
places as required and jointed as per
specification (Excavation of trenches 1,396.00 2,057.00 2,459.00 -

will be paid separately).

18-26 Fixing only 184.40 210.70 263.40 -

18-27 Add fixed in R/R 46.00 53.00 66.00 -

Bore of pipe & wall thickness in mm or grade.

32 x 1.6 38/40x2
uPVC PIPE mm mm
50x2.4 mm 80x3mm 110x3.4mm 110x4.2mm

18-28 Supply and fixing

of uPVC pipe used
as down pipe or
under floor /
210.00 269.00 364.00 545.00 714.00
concrete or in any
other place as 654
required as spd.
18-29 Fixing only 79.00 79.00 105.40 118.50 131.70 131.70

18-30 Add fixed in R/R 20.00 20.00 26.00 30.00 33.00 33.00
Bore of pipe & wall thickness in mm or grade.
150x4.8mm 200x7.9mm 250x7.9mm 300x7.9 mm
18-31 Supply and fixing of uPVC pipe used as
down pipe or under floor / concrete or
in any other place as required as spd.
(Excavation of trenches will be paid 1,253.00 2,064.00 2,441.00 5,208.00
separately)

18-32 Fixing only 184.40 210.70 237.10 263.40

18-33 Add fixed in R/R 46.00 53.00 59.00 66.00

341
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
uPVC EXTRA OVER PIPES AND
Bore of pipe, mm
FITTINGS
Each 50 mm 100 mm 150 mm

18-34 S/F of uPVC Plain bends, tapers, double

socket & oval pattern accessories, with
141.00 373.00 -
solution.

18-35 Fixing only 74.80 99.70 -

18-36 Add fixed in R/R 18.70 24.90 -

18-37
S/F uPVC Door bend complete with
- 308.00 659.00
accessories and solution as spd.

18-38 Fixing only - 74.80 74.80

18-39 Add fixed in R/R - 18.70 18.70

18-40
S/F of uPVC Plain Tee equal / unequal
226.00 495.00 1,107.00
complete as spd.

18-41 Fixing only 92.80 74.80 74.80

18-42 Add fixed in R/R 23.20 18.70 18.70

18-43 S/F of uPVC Door Tee equal / unequal
- 436.00 -
complete as spd.

18-44 Fixing only - 92.80 -

18-45 Add fixed in R/R - 23.20 -
18-46 S/F of uPVC Y / Tee section equal /
unequal complete as spd. (Large end will be 379.00 624.00 798.00
measured)

18-47 Fixing only 149.70 239.50 299.00

18-48 Add fixed in R/R 37.40 59.90 74.80

342
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description

uPVC EXTRA OVER PIPES AND FITTINGS

Rate in
Each
Tk
18-49 S/F of Branch pieces 100 mm bore (Double Branch) equal or
unequal arms, ordinary or inverted, swan neck offsets exc 75mm
but n.exc 300 mm projection 480.00

18-50 Fixing only 149.70

18-51 Add fixed in R/R 37.40

18-52 uPVC floor trap 100 mm bore fixing in position with all
requirement. 473.00

18-53 Fixing only 149.70

18-54 Add fixed in R/R 75.00

Rate in Taka
u PVC GUARD COWL (STOUT)
Bore of pipe
Add if fixed
in repair
Each 50mm 100mm

18-55 S/F of Over outlet of down pipes or tops of

ventilating pipes etc fixed complete dome
243.00 189.00 60.00
or balloon pattern

150mm
-
Bore
18-56 S/F of Over outlet of down pipes or tops of
ventilating pipes etc fixed complete dome
441.00 - 90.00
or balloon pattern

Rate in Taka
Except
Materials
Each pipe
& Labour
fitting

343
RESTRICTED
 RESTRICTED
SECTION-18

DRAINAGE AND SEPTIC TANK RATES

Item Description
18-57 Reinforced cement concrete 'Tee' 100 mm bore as
extra fittings for RCC non-pressure pipe as spd.
(Machine made) 432.00 90.00

344
RESTRICTED
 RESTRICTED
SECTION-19

SEWERAGE AND SEWAGE DISPOSAL RATES

Item Description

Rate in Taka

Bore of pipe, mm

300mm 375mm 450mm 600mm 750mm (75 900mm (100mm 1200mm

(37.5mm thick) (37.5mm thick) (62.5mm thick) (75.0mm thick) mm thick) thick) (125mm thick)
Per metre

Reinforced cement
concrete pipes (Machine
Made) non-pressure
type, laid & jointed with
collars as specified

19-1 Supply & Malerials 1219.00 1683.00 2265.00 2896.00 4314.00 6790.00 12579.00

19-2 Fixing only 395.00 461.00 527.00 593.00 659.00 724.00 790.00

Add in repair /
19-3 99.00 115.00 132.00 148.00 165.00 181.00 198.00
removal

344
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 4 mm

21-001 BYA 1 x 4 rm (7-w) 327.00 332.00 0.00 232.00 237.00 0.00

21-002 NYY 1 x 4 rm (7-w) 365.00 372.00 372.00 269.00 277.00 277.00

21-003 NYY 2 x 4 rm (7-w) 506.00 525.00 525.00 411.00 429.00 429.00

21-004 NYY 3 x 4 rm (7-w) 588.00 613.00 613.00 493.00 518.00 518.00

21-005 NYY 4 x 4 rm (7-w) 732.00 716.00 716.00 637.00 621.00 621.00

21-006 BYM 4 x 4 rm (7-w) 641.00 670.00 0.00 546.00 574.00 0.00

21-007 A2xY 1 x 4 rm (7-w) 0.00 0.00 296.00 0.00 0.00 201.00

21-008 A2xY 2 x 4 rm (7-w) 0.00 0.00 367.00 0.00 0.00 271.00

21-009 A2xY 3 x 4 rm (7-w) 0.00 0.00 393.00 0.00 0.00 298.00

21-010 A2xY 4 x 4 rm (7-w) 0.00 0.00 0.00 0.00 0.00 0.00

2
Size 6 mm

21-011 BYA 1 x 6 rm (7-w) 361.00 362.00 0.00 266.00 267.00 0.00

21-012 NYY 1 x 6 rm (7-w) 409.00 420.00 420.00 314.00 325.00 325.00

21-013 NYY 2 x 6 rm (7-w) 599.00 625.00 625.00 504.00 529.00 529.00

21-014 NYY 3 x 6 rm (7-w) 717.00 751.00 751.00 622.00 656.00 656.00

21-015 NYY 4 x 6 rm (7-w) 863.00 908.00 908.00 768.00 813.00 813.00

21-016 BYM 4 x 6 rm (7-w) 811.00 852.00 0.00 716.00 757.00 0.00

21-017 A2xY 1 x 6 rm (7-w) 0.00 0.00 314.00 0.00 0.00 219.00

21-018 A2xY 2 x 6 rm (7-w) 0.00 0.00 411.00 0.00 0.00 316.00

21-019 A2xY 3 x 6 rm (7-w) 0.00 0.00 451.00 0.00 0.00 356.00

21-020 A2xY 4 x 6 rm (7-w) 0.00 0.00 0.00 0.00 0.00 0.00

355
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

150.60 155.30 0.00 74.50 79.20 0.00 4.00 0.00 9.10 85.20 5.50 14.60 203.80

187.90 195.60 195.60 111.80 119.50 119.50 6.00 6.00 9.10 85.20 5.50 14.60 203.80

330.00 348.00 348.00 254.00 272.00 272.00 13.60 13.60 9.40 85.50 5.60 14.70 203.80

411.00 436.00 436.00 335.00 360.00 360.00 18.00 18.00 9.60 85.70 5.80 14.90 203.80

555.00 539.00 539.00 479.00 463.00 463.00 23.20 23.20 #### 86.10 6.00 15.10 203.80

464.00 493.00 0.00 388.00 417.00 0.00 20.90 0.00 #### 86.10 6.00 15.10 203.80

0.00 0.00 119.00 0.00 0.00 43.20 0.00 2.20 9.10 85.20 5.50 14.60 203.80

0.00 0.00 190.00 0.00 0.00 114.00 0.00 5.70 9.40 85.50 5.60 14.70 203.80

0.00 0.00 217.00 0.00 0.00 141.00 0.00 7.10 9.40 85.50 5.60 14.70 203.80

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

184.00 186.00 0.00 108.20 109.70 0.00 5.50 0.00 #### 86.10 6.00 15.10 203.80

232.00 243.00 243.00 156.10 167.10 167.10 8.40 8.40 #### 86.10 6.00 15.10 203.80

423.00 448.00 448.00 347.00 372.00 372.00 18.60 18.60 #### 86.40 6.20 15.30 203.80

540.00 575.00 575.00 464.00 498.00 498.00 24.90 24.90 #### 86.60 6.30 15.40 203.80

686.00 732.00 732.00 610.00 655.00 655.00 32.80 32.80 #### 87.10 6.60 15.70 203.80

634.00 675.00 0.00 558.00 599.00 0.00 30.00 0.00 #### 87.10 6.60 15.70 203.80

- - 138.00 - 0.00 62.00 0.00 3.10 #### 86.10 6.00 15.10 203.80

- - 234.00 - 0.00 158.00 0.00 7.90 #### 86.40 6.20 15.30 203.80

- - 275.00 - 0.00 198.00 0.00 9.90 #### 86.60 6.30 15.40 203.80

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

356
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 10 mm

21-021 BYA 1 x 10 rm (7-w) 425.00 427.00 0.00 330.00 332.00 0.00

21-022 NYY 1 x 10 rm (7-w) 485.00 502.00 502.00 390.00 407.00 407.00

21-023 NYY 2 x 10 rm (7-w) 773.00 811.00 811.00 677.00 716.00 716.00

21-024 NYY 3 x 10 rm (7-w) 962.00 1015.00 1015.00 867.00 919.00 919.00

21-025 NYY 4 x 10 rm (7-w) 1188.00 1258.00 1258.00 1093.00 1163.00 1163.00

21-026 BYM 4 x 10 rm (7-w) 1138.00 1204.00 0.00 1043.00 1109.00 0.00

21-027 A2xY 1 x 10 sm (7-w) - - 342.00 - - 246.00

21-028 A2xY 2 x 10 sm (7-w) - - 468.00 - - 373.00

21-029 A2xY 3 x 10 rm (7-w) - - 525.00 - - 430.00

21-030 A2xY 4 x 10 rm (7-w) - - 0.00 - - 0.00

Size 16 mm2

21-031 BYA 1 x 16 rm (7-w) 521.00 530.00 0.00 426.00 434.00 0.00

21-032 NYY 1 x 16 rm (7-w) 601.00 627.00 627.00 506.00 532.00 532.00

21-033 NYY 2 x 16 rm (7-w) 1015.00 1072.00 1072.00 920.00 976.00 976.00

21-034 NYY 3 x 16 rm (7-w) 1337.00 1418.00 1418.00 1242.00 1322.00 1322.00

21-035 NYY 4 x 16 rm (7-w) 1678.00 1784.00 1784.00 1583.00 1689.00 1689.00

21-036 BYM 4 x 16 rm (7-w) 1619.00 1722.00 0.00 1524.00 1626.00 0.00

21-037 BYA 1 x 16 rm (19-w) 522.00 531.00 0.00 427.00 435.00 0.00

21-038 NYY 4 x 16 rm (19-w) 0.00 1795.00 1795.00 0.00 1700.00 1700.00

21-039 A2xY 1 x 16 rm (7-W) - - 381.00 - - 285.00

21-040 A2xY 1 x 16 rm (19-W) - - 388.00 - - 293.00

357
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

248.00 251.00 0.00 172.20 175.00 0.00 8.80 0.00 #### 86.50 6.20 15.30 203.80

309.00 325.00 325.00 233.00 249.00 249.00 12.50 12.50 #### 86.50 6.20 15.30 203.80

596.00 634.00 634.00 520.00 558.00 558.00 27.90 27.90 #### 86.80 6.40 15.50 203.80

786.00 838.00 838.00 710.00 762.00 762.00 38.10 38.10 #### 87.00 6.50 15.60 203.80

1012.00 1081.00 1081.00 935.00 1005.00 1005.00 50.30 50.30 #### 87.60 6.90 16.00 203.80

962.00 1028.00 0.00 886.00 952.00 0.00 47.60 0.00 #### 87.60 6.90 16.00 203.80

- - 165.00 0.00 0.00 89.00 0.00 4.50 #### 86.50 6.20 15.30 203.80

- - 292.00 0.00 0.00 216.00 0.00 10.80 #### 86.80 6.40 15.50 203.80

- - 349.00 0.00 0.00 273.00 0.00 13.70 #### 87.00 6.50 15.60 203.80

0.00 0.00

344.00 353.00 0.00 268.10 276.90 0.00 13.80 0.00 #### 87.20 6.70 15.80 203.80

425.00 450.00 450.00 349.00 374.00 374.00 18.70 18.70 #### 87.20 6.70 15.80 203.80

838.00 895.00 895.00 762.00 819.00 819.00 41.00 41.00 #### 87.60 6.90 16.00 203.80

1160.00 1241.00 1241.00 1084.00 1165.00 1165.00 58.30 58.30 #### 87.80 7.00 16.10 203.80

1501.00 1608.00 1608.00 1,425.00 1,531.00 1,531.00 76.60 76.60 #### 88.40 7.40 16.50 203.80

1443.00 1545.00 0.00 1,367.00 1,469.00 - 73.50 0.00 #### 88.40 7.40 16.50 203.80

345.00 354.00 0.00 269.00 278.00 0.00 13.90 0.00 #### 87.20 6.70 15.80 203.80

0.00 1618.00 1618.00 0.00 1542.00 1542.00 77.10 77.10 #### 88.40 7.40 16.50 203.80

- - 204.00 0.00 0.00 128.00 0.00 6.40 #### 87.20 6.70 15.80 203.80

- - 211.00 0.00 0.00 135.00 0.00 6.80 #### 87.20 6.70 15.80 203.80

358
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 16 mm

21-041 A2xY 2 x 16 rm (7-W) - - 558.00 - - 463.00

21-042 A2xY 2 x 16 rm (19-W) - - 571.00 - - 476.00

21-043 A2xY 3 x 16 rm (7-W) - - 655.00 - - 559.00

21-044 A2xY 31/2 x 16/10 rm (7-W) - - 655.00 - - 560.00

21-045 A2xY 4 x 16 rm (7-W) - - 789.00 - - 694.00

Size 25 mm2

21-046 BYA 1 x 25 rm (7-w) 735.00 770.00 0.00 640.00 674.00 0.00

21-047 NYY 1 x 25 rm (7-w) 782.00 810.00 810.00 687.00 715.00 715.00

21-048 NYY 2 x 25 rm (7-w) 1429.00 1517.00 1517.00 1318.00 1421.00 1421.00

21-049 NYY 3 x 25 rm (7-w) 1914.00 2039.00 2039.00 1819.00 1944.00 1944.00

1
21-050 NYY 3 /2 x 25/16 rm (7/7-w) 2256.00 2256.00 2256.00 2161.00 2161.00 2161.00

21-051 NYY 4 x 25 rm (7-w) 2447.00 2611.00 2611.00 2351.00 2515.00 2515.00

21-052 BYM 4 x 25 rm (7-w) 2377.00 2536.00 0.00 2282.00 2441.00 0.00

21-053 BYA 1 x 25 rm (19-w) 739.00 774.00 0.00 643.00 679.00 0.00

21-054 NYY 1 x 25 rm (19-w) 0.00 824.00 824.00 0.00 729.00 729.00

21-055 NYY 4 x 25 rm (19-w) 0.00 2613.00 2613.00 0.00 2518.00 2518.00

21-056 BYM 4 x 25 rm (19-w) 0.00 2548.00 0.00 0.00 2453.00 0.00

21-057 A2xY 1 x 25 rm (7-w) - - 444.00 - - 349.00

21-058 A2xY 1 x 25 rm (19-w) - - 484.00 - - 389.00

21-059 A2xY 2 x 25 rm (7-w) - - 716.00 - - 620.00

21-060 A2xY 2 x 25 rm (19-w) - - 732.00 - - 637.00

21-061 A2xY 3 x 25 rm (7-w) - - 840.00 - - 741.00

21-062 A2xY 31/2 x 25/16 rm (7/7-w) - - 1402.00 - - 1307.00

21-063 A2xY 4 x 25 sm (7-w) - - 1085.00 - - 989.00

359
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

- - 381.00 0.00 0.00 305.00 0.00 15.30 #### 87.60 6.90 16.00 203.80

- - 394.00 0.00 0.00 318.00 0.00 15.90 #### 87.60 6.90 16.00 203.80

- - 478.00 0.00 0.00 402.00 0.00 20.10 #### 87.80 7.00 16.10 203.80

- - 479.00 0.00 0.00 403.00 0.00 20.20 #### 88.10 7.20 16.30 203.80

- - 613.00 0.00 0.00 537.00 0.00 26.90 #### 88.40 7.40 16.50 203.80

558.00 593.00 0.00 482.00 517.00 0.00 25.90 0.00 88.80 7.60 16.70 203.80
####

605.00 633.00 633.00 529.00 557.00 557.00 27.90 27.90 #### 88.80 7.60 16.70 203.80

1252.00 1340.00 1340.00 1176.00 1264.00 1264.00 63.20 63.20 #### 89.20 7.90 17.00 203.80

1738.00 1862.00 1862.00 1662.00 1786.00 1786.00 89.30 89.30 #### 89.40 8.00 17.10 203.80

2079.00 2079.00 2079.00 2003.00 2003.00 2003.00 100.20 100.20 #### 89.80 8.20 17.30 203.80

2270.00 2434.00 2434.00 2194.00 2358.00 2358.00 117.90 117.90 #### 90.10 8.40 17.50 203.80

2200.00 2359.00 0.00 2124.00 2283.00 0.00 114.20 0.00 #### 90.10 8.40 17.50 203.80

562.00 597.00 0.00 486.00 521.00 0.00 26.10 0.00 #### 89.30 7.90 17.00 203.80

0.00 648.00 648.00 0.00 572.00 572.00 28.60 28.60 #### 89.30 7.90 17.00 203.80

0.00 2436.00 2436.00 0.00 2360.00 2360.00 118.00 118.00 #### 90.60 8.70 17.80 203.80

0.00 2371.00 0.00 0.00 2295.00 0.00 114.80 0.00 #### 90.60 8.70 17.80 203.80

- - 267.00 - 0.00 191.00 0.00 9.60 #### 89.30 7.90 17.00 203.80

- - 308.00 - 0.00 231.00 0.00 11.60 #### 89.30 7.90 17.00 203.80

- - 539.00 - 0.00 463.00 0.00 23.20 #### 89.70 8.20 17.30 203.80

- - 556.00 - 0.00 479.00 0.00 24.00 #### 89.70 8.20 17.30 203.80

- - 663.00 - 0.00 587.00 0.00 29.40 #### 90.00 8.30 17.40 203.80

- - 1226.00 - 0.00 1150.00 0.00 57.50 #### 90.40 8.60 17.70 203.80

- - 908.00 - 0.00 832.00 0.00 41.60 #### 90.60 8.70 17.80 203.80

360
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 35 mm

21-064 BYA 1 x 35 rm (19-w) 916.00 965.00 0.00 821.00 869.00 0.00

21-065 NYY 1 x 35 rm (19-w) 954.00 1005.00 1005.00 859.00 909.00 909.00

21-066 NYY 3 x 35 sm (19-w) 2373.00 2531.00 2531.00 2277.00 2436.00 2436.00

21-067 NYY 31/2 x 35/16 sm (19/7-w) 2750.00 2937.00 2937.00 2655.00 2841.00 2841.00

21-068 NYY 4 x 35 sm (20-w) 3107.00 3321.00 3321.00 3011.00 3225.00 3225.00

21-069 BYM 4 x 35 sm 20-w) 3153.00 3269.00 0.00 3058.00 3174.00 0.00

21-070 A2xY 1 x 35 rm (19-w) - - 517.00 - - 422.00

21-071 A2xY 2 x 35 rm (19-w) - - 968.00 - - 873.00

21-072 A2xY 3 x 35 rm (20-w) - - 1261.00 - - 1166.00

21-073 A2xY 31/2 x 35/16 rm (19/7-w) - - 1481.00 - - 1385.00

21-074 A2xY 4 x 35 sm (20-w) - - 1601.00 - - 1506.00

Size 50 mm2

21-075 BYA 1 x 50 rm (19-w) 1197.00 1221.00 0.00 1101.00 1126.00 0.00

21-076 NYY 1 x 50 rm (19-w) 1261.00 1314.00 1314.00 1165.00 1219.00 1219.00

21-077 NYY 3 x 50 sm (19-w) 3258.00 3483.00 3483.00 3181.00 3405.00 3405.00

1
21-078 NYY 3 /2 x 50/25 sm (19/7-w) 3799.00 4065.00 4065.00 3722.00 3988.00 3988.00

21-079 NYY 4 x 50 sm (20-w) 4269.00 4571.00 4571.00 4192.00 4493.00 4493.00

21-080 A2xY 1 x 50 rm (19-w) - - 537.00 - - 442.00

21-081 A2xY 3 x 50 sm (20-w) - - 1427.00 - - 1332.00

21-082 A2xY 31/2 x 50/25 rm (19/7-w) - - 1738.00 - - 1643.00

21-083 A2xY 4 x 50 sm (20-w) - - 1918.00 - - 1822.00

361
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

739.00 788.00 0.00 663.00 712.00 0.00 35.60 0.00 #### 90.50 8.60 17.70 203.80

778.00 828.00 828.00 702.00 752.00 752.00 37.60 37.60 #### 90.50 8.60 17.70 203.80

2196.00 2354.00 2354.00 2120.00 2278.00 2278.00 113.90 113.90 #### 91.20 9.10 18.20 203.80

2573.00 2760.00 2760.00 2497.00 2684.00 2684.00 134.20 134.20 #### 91.70 9.40 18.50 203.80

2930.00 3144.00 3144.00 2854.00 3068.00 3068.00 153.40 153.40 #### 92.00 9.50 18.60 203.80

2977.00 3093.00 0.00 2900.00 3017.00 0.00 150.90 0.00 #### 92.00 9.50 18.60 203.80

- - 341.00 - 0.00 264.00 0.00 13.20 14.42 90.50 8.70 17.80 203.80

- - 791.00 - 0.00 715.00 0.00 35.80 14.86 91.00 8.90 18.00 203.80

- - 1084.25 - 0.00 1008.00 0.00 50.40 15.14 91.30 9.10 18.20 203.80

- - 1304.00 - 0.00 1228.00 0.00 61.40 15.58 91.70 9.30 18.40 203.80

- - 1425.00 - 0.00 1349.00 0.00 67.50 15.87 92.00 9.50 18.60 203.80

1020.00 1044.00 0.00 944.00 968.00 0.00 48.40 0.00 #### 94.50 11.00 20.10 203.80

1084.00 1137.00 1137.00 1008.00 1061.00 1061.00 53.10 53.10 #### 94.50 11.00 20.10 203.80

3005.00 3230.00 3230.00 161.50 161.50 #### 95.50 11.60 20.70 203.80
3081.00 3306.00 3306.00

3623.00 3888.00 3888.00 3546.00 3812.00 3812.00 190.60 190.60 #### 96.00 11.90 21.00 203.80

4093.00 4394.00 4394.00 4017.00 4318.00 4318.00 215.90 215.90 #### 96.40 12.20 21.30 203.80

- - 361.00 - 0.00 285.00 0.00 14.30 14.42 90.50 8.70 17.80 203.80

- - 1251.00 - 0.00 1175.00 0.00 58.80 14.86 91.00 8.90 18.00 203.80

- - 1485.00 - 0.00 1470.00 0.00 73.50 15.14 91.30 9.10 18.20 203.80

- - 1665.00 - 0.00 1649.00 0.00 82.50 15.87 92.00 9.50 18.60 203.80

362
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 70 mm

21-084 BYA 1 x 70 rm (19-w) 1565.00 1663.00 0.00 1470.00 1568.00 0.00

21-085 NYY 1 x 70 rm (19-w) 1639.00 1741.00 1741.00 1543.00 1646.00 1646.00

21-086 NYY 3 x 70 sm (19-w) 4401.00 4712.00 4712.00 4324.00 4635.00 4635.00

21-087 NYY 31/2 x 70/35 sm (19/19-w) 5222.00 5594.00 5594.00 5145.00 5517.00 5517.00

21-088 NYY 4 x 70 sm (20-w) 5813.00 6231.00 6231.00 5736.00 6153.00 6153.00

21-089 A2xY 1 x 70 rm (19-w) - - 634.00 - - 539.00

21-090 A2xY 3 x 70 sm (20-w) - - 1750.00 - - 1654.00

1
21-091 A2xY 3 /2 x 70/50 rm (19/7-w) - - 2287.00 - - 2192.00

21-092 A2xY 4 x 70 sm (20-w) - - 2602.00 - - 2507.00

Size 95 mm2

21-093 BYA 1 x 95 rm (19-w) 2016.00 2147.00 0.00 1920.00 2052.00 0.00

21-094 NYY 1 x 95 rm (19-w) 2102.00 2240.00 2240.00 2007.00 2145.00 2145.00

21-095 NYY 3 x 95 sm (19-w) 5836.00 6255.00 6255.00 5759.00 6178.00 6178.00

1
21-096 NYY 3 /2 x 95/50 sm (19/19-w) 6991.00 7496.00 7496.00 6914.00 7419.00 7419.00

21-097 NYY 4 x 95 sm (20-w) 7765.00 8329.00 8329.00 7687.00 8252.00 8252.00

21-098 A2xY 1 x 95 rm (19-w) - - 746.00 - - 651.00

21-099 A2xY 3 x 95 sm (20-w) - - 1920.00 - - 1825.00

21-100 A2xY 31/2 x 95/50 rm (19/19-w) - - 3082.00 - - 2987.00

21-101 A2xY 4 0 70 sm (20-w) - - 3255.00 - - 3160.00

363
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

1389.00 1486.00 0.00 1313.00 1410.00 0.00 70.50 0.00 #### 95.30 11.50 20.60 203.80

1462.00 1565.00 1565.00 1386.00 1489.00 1489.00 74.50 74.50 #### 95.30 11.50 20.60 203.80

4224.00 4535.00 4535.00 4148.00 4459.00 4459.00 223.00 223.00 #### 96.30 12.10 21.20 203.80

5046.00 5418.00 5418.00 4969.00 5342.00 5342.00 267.10 267.10 #### 96.80 12.40 21.50 203.80

5637.00 6054.00 6054.00 5561.00 5978.00 5978.00 298.90 298.90 #### 97.20 12.70 21.80 203.80

- - 457.00 - 0.00 381.00 0.00 19.10 19.21 95.30 11.50 20.60 203.80

- - 1573.00 - 0.00 1497.00 0.00 74.90 20.17 96.30 12.10 21.20 203.80

- - 2111.00 - 0.00 2035.00 0.00 101.80 20.75 96.90 12.40 21.50 203.80

- - 2426.00 - 0.00 2349.00 0.00 117.50 21.13 97.20 12.70 21.80 203.80

1839.00 1970.00 0.00 1763.00 1894.00 0.00 94.70 0.00 #### 97.10 12.60 21.70 203.80

1926.00 2063.00 2063.00 1849.00 1987.00 1987.00 99.40 99.40 #### 97.10 12.60 21.70 203.80

5660.00 6078.00 6078.00 5584.00 6002.00 6002.00 300.10 300.10 #### 98.10 13.20 22.30 203.80

6814.00 7319.00 7319.00 6738.00 7243.00 7243.00 362.20 362.20 #### 98.70 13.60 22.70 203.80

7588.00 8152.00 8152.00 7512.00 8076.00 8076.00 403.80 403.80 #### 99.20 13.90 23.00 203.80

- - 570.00 - 0.00 494.00 0.00 24.70 20.95 97.10 12.60 21.70 203.80

- - 1744.00 - 0.00 1668.00 0.00 83.40 22.00 98.10 13.20 22.30 203.80

- - 2906.00 - 0.00 2830.00 0.00 141.50 22.63 98.70 13.60 22.70 203.80

- - 3078.00 - 0.00 3002.00 0.00 150.10 23.05 99.20 13.80 22.90 203.80

364
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 120 mm

21-102 BYA 1 x 120 rm (37-w) 2469.00 2634.00 0.00 2374.00 2539.00 0.00

21-103 NYY 1 x 120 rm (37-w) 2568.00 2741.00 2741.00 2473.00 2645.00 2645.00

21-104 NYY 3 x 120 sm (37-w) 7244.00 7768.00 7768.00 7167.00 7691.00 7691.00

21-105 NYY 31/2 x 120/70 sm (37/19-w) 8763.00 9401.00 9401.00 8686.00 9324.00 9324.00

21-106 NYY 4 x 120 sm (39-w) 9610.00 10313.00 10313.00 9533.00 10236.00 10236.00

21-107 A2xY 1 x 120 rm (37-w) - - 859.00 - - 764.00

21-108 A2xY 3 x 120 sm (39-w) - - 3246.00 - - 3150.00

1
21-109 A2xY 3 /2 x 120/70 rm (37/19-w) - - 4161.00 - - 4065.00

21-110 A2xY 4 x 120 sm (39-w) - - 3892.00 - - 3796.00

Size 150 mm2

21-111 BYA 1 x 150 rm (37-w) 2742.00 3227.00 0.00 2742.00 3132.00 0.00

21-112 NYY 1 x 150 rm (37-w) 3138.00 3353.00 3353.00 3043.00 3258.00 3258.00

21-113 NYY 3 x 150 sm (37-w) 8956.00 9609.00 9609.00 8879.00 9531.00 9531.00

1
21-114 NYY 3 /2 x 150/70 sm (37/19-w) 10474.00 11241.00 11241.00 10397.00 11164.00 11164.00

21-115 NYY 4 x 150 sm (39-w) 11940.00 12818.00 12818.00 11863.00 12741.00 12741.00

21-116 A2xY 1 x 150 rm (37-w) - - 1009.00 - - 914.00

21-117 A2xY 3 x 150 sm (39-w) - - 3433.00 - - 3338.00

21-118 A2xY 31/2 x 150/70 rm (37/19-w) - - 4836.00 - - 4741.00

21-119 A2xY 4 x 150 sm (39-w) - - 4645.00 - - 4549.00

365
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

2292.00 2457.00 0.00 2216.00 2381.00 0.00 119.10 0.00 #### 99.20 13.90 23.00 203.80

2391.00 2564.00 2564.00 2315.00 2488.00 2488.00 124.40 124.40 #### 99.20 13.90 23.00 203.80

7067.00 7591.00 7591.00 6991.00 7515.00 7515.00 375.80 375.80 #### ###### 14.50 23.60 203.80

8586.00 9225.00 9225.00 8510.00 9148.00 9148.00 457.40 457.40 #### ###### 14.50 23.60 203.80

9433.00 10136.00 10136.00 9357.00 10060.00 10060.00 503.00 503.00 #### ###### 14.90 24.00 203.80

- - 682.00 - 0.00 606.00 0.00 30.30 23.05 99.20 13.80 22.90 203.80

- - 3069.00 - 0.00 2993.00 0.00 149.70 24.20 ###### 14.50 23.60 203.80

- - 3984.00 - 0.00 3908.00 0.00 195.40 24.89 ###### 14.90 24.00 203.80

- - 3715.00 - 0.00 3639.00 0.00 182.00 25.36 ###### 15.20 24.30 203.80

2742.00 3051.00 0.00 2742.00 2975.00 0.00 148.80 0.00 #### ###### 15.50 24.60 203.80

2961.00 3176.00 3176.00 2885.00 3100.00 3100.00 155.00 155.00 #### ###### 16.00 25.10 203.80

8779.00 9432.00 9432.00 8703.00 9356.00 9356.00 467.80 467.80 #### ###### 16.30 25.40 203.80

10298.00 11064.00 11064.00 10221.00 10988.00 10988.00 549.40 549.40 #### ###### 16.80 25.90 203.80

11764.00 12642.00 12642.00 11687.00 12566.00 12566.00 628.30 628.30 #### ###### 17.10 26.20 203.80

- - 832.00 - 0.00 756.00 0.00 37.80 25.94 ###### 15.60 24.70 203.80

- - 3257.00 - 0.00 3181.00 0.00 159.10 27.24 ###### 16.30 25.40 203.80

- - 4660.00 - 0.00 4584.00 0.00 229.20 28.02 ###### 16.80 25.90 203.80

- - 4468.00 - 0.00 4392.00 0.00 219.60 28.54 ###### 17.10 26.20 203.80

366
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 185 mm

21-120 BYA 1 x 185 rm (37-w) 3380.00 3915.00 0.00 3380.00 3820.00 0.00

21-121 NYY 1 x 185 rm (37-w) 3805.00 4070.00 4070.00 3709.00 3975.00 3975.00

21-122 NYY 3 x 185 sm (37-w) 11007.00 11814.00 11814.00 10929.00 11736.00 11736.00

21-123 NYY 31/2 x 185/95 sm (37/19-w) 12975.00 13930.00 13930.00 12898.00 13852.00 13852.00

21-124 NYY 4 x 185 sm (39-w) 14615.00 15695.00 15695.00 14538.00 15617.00 15617.00

21-125 A2xY 1 x 185 rm (37-w) - - 1173.00 - - 1078.00

21-126 A2xY 3 x 185 sm (39-w) - - 4212.00 - - 4117.00

1
21-127 A2xY 3 /2 x 185/95 rm (37/19-w) - - 4994.00 - - 4899.00

21-128 A2xY 4 x 185 sm (39-w) - - 5493.00 - - 5398.00

Size 240 mm2

21-129 BYA 1 x 240 rm (61-w) 4893.00 5015.00 0.00 4798.00 4919.00 0.00

21-130 NYY 1 x 240 rm (61-w) 4848.00 5192.00 5192.00 4753.00 5097.00 5097.00

21-131 NYY 3 x 240 sm (61-w) 14171.00 15215.00 15215.00 14093.00 15138.00 15138.00

1
21-132 NYY 3 /2 x 240/120 sm (37/19-w) 16719.00 17955.00 17955.00 16642.00 17878.00 17878.00

21-133 NYY 4 x 240 sm (39-w) 18328.00 20387.00 20387.00 18251.00 20310.00 20310.00

21-134 A2xY 1 x 240 rm (61-w) - - 1428.00 - - 4330.00

21-135 A2xY 3 x 240 sm (39-w) - - 5019.00 - - 4924.00

21-136 A2xY 31/2 x 240/120 rm (37/19-w) - - 5972.00 - - 5877.00

21-137 A2xY 4 x 240 sm (39-w) - - 6811.00 - - 6716.00

367
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

3380.00 3738.00 0.00 3380.00 3662.00 0.00 183.10 0.00 #### ###### 16.70 25.80 203.80

3628.00 3893.00 3893.00 3552.00 3817.00 3817.00 190.90 190.90 #### ###### 17.20 26.30 203.80

10830.00 11637.00 11637.00 10754.00 11561.00 11561.00 578.10 578.10 #### ###### 17.50 26.60 203.80

12798.00 13753.00 13753.00 12722.00 13677.00 13677.00 683.90 683.90 #### ###### 18.00 27.10 203.80

14438.00 15518.00 15518.00 14362.00 15442.00 15442.00 772.10 772.10 #### ###### 18.40 27.50 203.80

- - 997.00 - 0.00 920.00 0.00 46.00 27.80 ###### 16.70 25.80 203.80

- - 4035.00 - 0.00 3959.00 0.00 198.00 29.19 ###### 17.50 26.60 203.80

- - 4817.00 - 0.00 4741.00 0.00 237.10 30.02 ###### 18.00 27.10 203.80

- - 5317.00 - 0.00 5241.00 0.00 262.10 30.58 ###### 18.30 27.40 203.80

4716.00 4838.00 0.00 4640.00 4762.00 0.00 238.10 0.00 #### ###### 17.90 27.00 203.80

4672.00 5015.00 5015.00 4596.00 4939.00 4939.00 247.00 247.00 #### ###### 18.50 27.60 203.80

13994.00 15039.00 15039.00 13918.00 14963.00 14963.00 748.20 748.20 #### ###### 18.80 27.90 203.80

16542.00 17779.00 17779.00 16466.00 17702.00 17702.00 885.10 885.10 #### ###### 19.40 28.50 203.80

18152.00 20211.00 20211.00 18076.00 20134.00 20134.00 ###### ###### #### ###### 19.70 28.80 203.80

- - 1251.00 - 0.00 1175.00 0.00 58.80 29.94 ###### 18.00 27.10 203.80

- - 4842.00 - 0.00 4766.00 0.00 238.30 31.43 ###### 18.90 28.00 203.80

- - 5795.00 - 0.00 5719.00 0.00 286.00 32.33 ###### 19.40 28.50 203.80

- - 6634.00 - 0.00 6558.00 0.00 327.90 32.93 ###### 19.80 28.90 203.80

368
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 300 mm

21-138 BYA 1 x 300 rm (61-w) 6094.00 6175.00 0.00 6017.00 6098.00 0.00

21-139 NYY 1 x 300 rm (61-w) 5957.00 6384.00 6384.00 5880.00 6307.00 6307.00

21-140 NYY 3 x 300 sm (61-w) 17603.00 22281.00 22281.00 17515.00 22193.00 22193.00

21-141 NYY 31/2 x 300/150 sm (61/19-w) 20744.00 22282.00 22282.00 20656.00 22194.00 22194.00

21-142 NYY 4 x 300 sm (39-w) 25197.00 25539.00 25539.00 25108.00 25451.00 25451.00

21-143 A2xY 1 x 300 rm (61-w) - - 1708.00 - - 1631.00

21-144 A2xY 3 x 300 sm (39-w) - - 6139.00 - - 6050.00

1
21-145 A2xY 3 /2 x 300/150 rm (61/37-w) - - 7161.00 - - 7073.00

21-146 A2xY 4 x 240 sm (61-w) - - 8352.00 - - 8263.00

Size 400 mm2

21-147 BYA 1 x 400 rm (61-w) 8041.00 8142.00 0.00 7964.00 8065.00 0.00

21-148 NYY 1 x 400 rm (61-w) 7840.00 8408.00 8408.00 7763.00 8331.00 8331.00

21-149 NYY 3 x 400 rm (61-w) 0.00 18909.00 18909.00 0.00 18820.00 18820.00

21-150 A2xY 1 x 400 rm (61-w) - - 2157.00 - - 2079.00

21-151 A2xY 3 x 400 sm (61-w) - - 7845.00 - - 7756.00

1
21-152 A2xY 3 /2 x 400/185 rm (61/37-w) - - 9274.00 - - 9185.00

21-153 A2xY 4 x 400 sm (61-w) - - 10472.00 - - 10384.00

2
Size 500 mm
21-154 BYA 1 x 500 rm (61-w) 0.00 10092.00 0.00 0.00 10015.00 0.00

21-155 NYY 1 x 500 rm (61-w) 9713.00 10422.00 10422.00 9636.00 10344.00 10344.00

21-156 NYY 3 x 500 rm (61-w) 0.00 0.00 0.00 0.00 0.00 0.00

21-157 A2xY 1 x 500 rm (61-w) - - 2595.00 - - 2518.00

21-158 A2xY 3 x 500 sm (61-w) - - 9855.00 - - 9766.00

1
21-159 A2xY 3 /2 x 500/240 rm (61/37-w) - - 10683.00 - - 10594.00

21-160 A2xY 4 x 500 sm (61-w) - - 12288.00 - - 12200.00

369
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

5918.00 5998.00 0.00 5842.00 5922.00 0.00 296.10 0.00 #### ###### 20.50 29.60 203.80

5781.00 6207.00 6207.00 5704.00 6131.00 6131.00 306.60 306.60 #### ###### 21.10 30.20 203.80

17426.00 22105.00 22105.00 17350.00 22029.00 22029.00 ###### ###### #### ###### 21.50 30.60 203.80

20568.00 22106.00 22106.00 20491.00 22030.00 22030.00 ###### ###### #### ###### 22.10 31.20 203.80

25020.00 25362.00 25362.00 24944.00 25286.00 25286.00 ###### ###### #### ###### 22.60 31.70 203.80

- - 1532.00 - 0.00 1456.00 0.00 72.80 34.18 ###### 20.50 29.60 203.80

- - 5962.00 - 0.00 5886.00 0.00 294.30 35.89 ###### 21.50 30.60 203.80

- - 6985.00 - 0.00 6909.00 0.00 345.50 36.91 ###### 22.10 31.20 203.80

- - 8175.00 - 0.00 8099.00 0.00 405.00 37.59 ###### 22.60 31.70 203.80

7864.00 7965.00 0.00 7788.00 7889.00 0.00 394.50 0.00 #### ###### 22.40 31.50 203.80

7663.00 8232.00 8232.00 7587.00 8155.00 8155.00 407.80 407.80 #### ###### 23.00 32.10 203.80

0.00 18732.00 18732.00 0.00 18656.00 18656.00 932.80 932.80 #### ###### 23.50 32.60 203.80

- - 1980.00 - 0.00 1904.00 0.00 95.20 37.28 ###### 22.40 31.50 203.80

- - 7668.00 - 0.00 7592.00 0.00 379.60 39.15 ###### 23.50 32.60 203.80

- - 9097.00 - 0.00 9021.00 0.00 451.10 40.27 ###### 24.20 33.30 203.80

- - 10295.00 - 0.00 10219.00 0.00 511.00 41.01 ###### 24.60 33.70 203.80

0.00 9915.00 0.00 0.00 9839.00 0.00 492.00 0.00 #### ###### 24.60 33.70 203.80

9536.00 10245.00 10245.00 9460.00 10169.00 10169.00 508.50 508.50 #### ###### 25.30 34.40 203.80

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 - 76.10 - 9.10 203.80

- - 2419.00 - 0.00 2343.00 0.00 117.20 41.01 ###### 24.60 33.70 203.80

- - 9678.00 - 0.00 9602.00 0.00 480.10 43.06 ###### 25.80 34.90 203.80

- - 10506.00 - 0.00 10430.00 0.00 521.50 44.29 ###### 26.60 35.70 203.80

- - 12112.00 - 0.00 12036.00 0.00 601.80 45.11 ###### 27.10 36.20 203.80

370
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Item
Description of works
no
Per Metre Rate in Taka

Materials & Labour

Cable electric Low and medium
tension laid in trenches / pipe / Using
conduit / duct including trench
excavation, embankments, required
bricks / tiles, sand etc. (Excluding Bricks Tiles
pipe / conduit / duct, is to be paid
BRB / Paradise / BRB / Paradise /
separately) as specified voltage &
current ratings according to cable Poly / Supersign / Poly / Supersign /
Eastern Citizen Eastern Citizen
code BYA / NYY / BYM / A2xY /
NYSEYFGby to VDE standard. PVC XLPE PVC XLPE
A B C D E F
2
Size 630 mm

21-161 NYY 1 x 630 rm (127-w) 12176.00 13069.00 13069.00 12099.00 12992.00 12992.00

21-162 NYY 3 x 630 rm (61-w) 0.00 0.00 0.00 0.00 0.00 0.00

21-163 A2xY 1 x 630 rm (61-w) - - 3214.00 - - 3137.00

21-164 A2xY 3 x 630 sm (61-w) - - 12264.00 - - 12176.00

2
Size 800 mm

21-165 A2xY 1 x 800 rm (61-w) - - 3989.00 - - 3900.00

Size 1000 mm2

21-166 A2xY 1 x 1000 rm (61-w) - - 4878.00 - - 4790.00

H T ( 11 KV ) ARMOURED 3 Core, Copper conductor cable (Eastern) and (BRB /

Supersign as other than Eastern)

21-167 NYSEYFGby 3 x 16 rm 3521.00 0.00 3216.00 3444.00 0.00 3216.00

21-168 NYSEYFGby 3 x 25 rm 4287.00 4283.00 4587.00 4211.00 4283.00 4510.00

21-169 NYSEYFGby 3 x 35 sm 5054.00 4746.00 5053.00 4977.00 4746.00 4977.00

21-170 NYSEYFGby 3 x 50 sm 6066.00 6188.00 6499.00 5990.00 6188.00 6422.00

21-171 NYSEYFGby 3 x 70 sm 7631.00 7866.00 8118.00 7574.00 7866.00 8125.00

21-172 NYSEYFGby 3 x 95 sm 9407.00 9769.00 10090.00 9350.00 9769.00 10033.00

21-173 NYSEYFGby 3 x 120 sm 11208.00 11691.00 12026.00 11151.00 11691.00 11969.00

H T (ARMOURED Single Core, Copper conductor) cable

21-174 NYHSY-HT 1 x 50 rm - 1892.00 - - 1803.00 -

21-175 NYHSY-HT 1 x 70 rm - 2344.00 - - 2255.00 -

21-176 NYHSY-HT 1 x 95 rm - 2834.00 - - 2746.00 -

21-177 NYHSY-HT 1 x 120 rm - 3321.00 - - 3244.00 -

21-178 NYHSY-HT 1 x 185 rm - 4513.00 - - 4437.00 -

21-179 NYHSY-HT 1 x 240 rm - 5656.00 - - 5580.00 -

21-180
Blank
21-220

371
RESTRICTED
 RESTRICTED
SECTION-21

UNDER GROUND CABLE RATES

Rate in Taka
Add in repair /
Materials & Labour Deduct from the
Fixing only
removal
Supply & Fixing cable only rates of BRB /
Except (Except bricks / tiles and Paradise etc. if
Includi
trenches) other approved
ng Includin
cables like
Bricks / Tiles trench, g bricks Add if rock
Sunsine/ "777"
Cable bricks / Cable / tiles
Energy / Evana /
BRB / Paradise / BRB / Paradise / MEP etc. are
only tiles only and
Poly / Supersign / Poly / Supersign laying back
used.
Eastern Eastern with filling
Citizen / Citizen sand
PVC XLPE PVC XLPE PVC XLPE
G H I M N O P Q R S T U V

11999.00 12893.00 12893.00 11923.00 12817.00 12817.00 640.90 640.90 #### ###### 29.00 38.10 203.80

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 - 76.10 - 9.10 203.80

- - 3037.00 - 0.00 2961.00 0.00 148.10 46.87 ###### 28.10 37.20 203.80

- - 12087.00 - 0.00 12011.00 0.00 600.60 49.21 ###### 29.50 38.60 203.80

- - 3812.00 - 0.00 3736.00 0.00 186.80 50.62 ###### 30.40 39.50 203.80

- - 4702.00 - 0.00 4626.00 0.00 231.30 51.56 ###### 30.90 40.00 203.80

3344.00 0.00 3216.00 3268.00 0.00 3216.00 0.00 160.80 #### ###### 28.10 37.20 203.80

4111.00 4283.00 4410.00 4034.00 4283.00 4334.00 214.20 216.70 #### ###### 30.80 39.90 203.80

4877.00 4746.00 4877.00 4801.00 4746.00 4801.00 237.30 240.10 #### ###### 32.80 41.90 203.80

5890.00 6188.00 6322.00 5813.00 6188.00 6246.00 309.40 312.30 #### ###### 35.20 44.30 203.80

7455.00 7866.00 7942.00 7379.00 7866.00 7866.00 393.30 393.30 #### ###### 37.90 47.00 203.80

9230.00 9769.00 9914.00 9154.00 9769.00 9838.00 488.50 491.90 #### ###### 41.00 50.10 203.80

11031.00 11691.00 11849.00 10955.00 11691.00 11773.00 584.60 588.70 #### ###### 49.20 58.30 203.80

- 1715.00 - - 1639.00 - 82.00 - 58.59 ###### 35.20 44.30 203.80

- 2167.00 - - 2091.00 - 104.60 - 60.76 ###### 36.50 45.60 203.80

- 2657.00 - - 2581.00 - 129.10 - 63.10 ###### 37.90 47.00 203.80

- 3144.00 - - 3068.00 - 153.40 - 65.62 ###### 39.40 48.50 203.80

- 4337.00 - - 4261.00 - 213.10 - 68.35 ###### 41.00 50.10 203.80

- 5480.00 - - 5404.00 - 270.20 - 74.57 ###### 44.70 53.80 203.80

372
RESTRICTED
 RESTRICTED
SECTION-21

EXTERNAL ELECTRIFICATION

ITEM NO. DESCRIPTION Rate in Taka

Excavation in any
POLE ELECTRIC
soil with materials
EACH and Labour

21-221 Pole steel tubular, erection in position, setting

including digging holes 150 mm CC foundation
75 mm muffler around as per drawing and
15,731.00
specification for 9 metre height type 'A'

21-222 - Ditto - but 9 metre type 'AA' 20,535.00

21-223 - Ditto - but 11 metre type 'B' 17,098.00

21-224 - Ditto - but 12 metre type 'C' 19,220.00

21-225 - Ditto - but 9 metre type 'D' 12,127.00

21-226 - Ditto - but 9 metre type 'DD' 12,378.00

21-227 - Ditto - but 5 metre type 'E' street / 10,022.00

garden light post

21-228 Pole PC tubular (PDB type) 9 / 10 metre

height supply, setting & erection in position all
as spd and direction of Engineer in charge. 20747.00

21-229 - Ditto - 11 metre height. 25394.00

21-230 - Ditto - 12 metre height. 29781.00

21-231 - Ditto - but RCC pole 0.00

21-232 Lattice pole setting / erecting in position,

digging holes & CC foundation as spd upto 9
0.00
metre height

21-233 - Ditto - but upto 12 metre height as spd. 0.00

21-234 Digging hole, seting and erection in position of 0.00

wooden pole REB type upto 9 metre height all
as spd.

21-235

373
RESTRICTED
 RESTRICTED
SECTION-21

EXTERNAL ELECTRIFICATION

Rate in Taka
Excavation in any soil Recovery/
Add to if Re-
Strengthenin fixed with 2
Excluding pole (Digging Hole) Removal or Add to if
g of pole in
Add to if
coats Remarks
Erection Except Except CC line rock anticorrosive
fixed in R/R
Only Cement Work paint

1,936.00 1,746.00 1,226.00 434.00 415.00 292.00 54.10

1,941.00 1,732.00 1,238.00 432.00 414.00 297.00 51.70

2,596.00 2,366.00 1,754.00 585.00 558.00 416.00 82.80

2,674.00 2,437.00 1,807.00 603.00 575.00 428.00 85.30

924.00 809.00 503.00 200.20 150.20 0.00 0.00

924.00 809.00 503.00 200.00 150.00 0.00 0.00

1,717.00 1,324.00 285.00 0.00 0.00 0.00 0.00

1,228.00 1,194.00 1,102.00 608.00 137.70 137.70 0.00

1,733.00 1,698.00 1,607.00 1004.00 753.00 188.00 0.00

2,187.00 2,188.00 2,047.00 1131.00 848.00 248.00 0.00

1,017.00 981.00 887.00 415.00 311.00 0.00 0.00

3,526.00 2,680.00 438.00 275.00 263.00 0.00 0.00

3,646.00 2,799.00 558.00 446.00 335.00 0.00 0.00

359.00 237.00 177.80 237.00 177.80 0.00 0.00

374
RESTRICTED
 RESTRICTED
SECTION-21

To BLANK

21-250

375
RESTRICTED
RESTRICTED
SECTION-21

376
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
Rate in Taka
Add to
Materials and Add if fixed in
CROSS ARMS Labour
Fixing Only
R/R
Materials Lab.
if galv.
Each
21-251 Cross arms MS. Channels Iron with
clamps, washers, bolts and nuts etc type 'A' 2024.00 172.10 86.10 148.00

21-252 - Ditto - but type 'B' 1776.00 172.10 86.10 128.00

21-253 - Ditto - but type 'C' 1374.00 153.00 76.50 98.00
21-254 - Ditto - but type 'D' 1633.00 137.70 68.90 120.00
21-255 - Ditto - but type 'E' 1284.00 172.10 86.10 89.00
21-256 - Ditto - but type 'F' 1891.00 172.10 86.10 137.00
21-257 - Ditto - but type 'G' 4373.00 172.10 86.10 336.00
21-258 - Ditto - but type 'H' 2290.00 230.00 114.80 165.00
21-259 - Ditto - but type 'I' 1026.00 137.70 68.90 71.00
21-260 - Ditto - but type 'J' 852.00 137.70 68.90 57.00
21-261 Side mounted bracket assembly for fixing
of 11 kv pin insulator (Single arm) 609.00 172.10 86.10 35.00

21-262 - Ditto - but (Double arm) 940.00 172.10 86.10 35.00

21-263 Top mounted bracket assembly Ridge iron

assembly complete for fixing of 11 KV pin
1,117.00 172.10 86.10 76.00
Insulator

Second & Subsequent coat new

POLE PAINTING First coat new or old work
or old

Excluding Cross Excluding Cross

Each Complete Complete
arms Bracket arms

21-264 Painting of erected steel tubular pole with

Aluminium paint above 1 M from CC
muffler to top and bottom portion with 142.10 105.70 114.60 83.00
black enameled paint (1M from CC
muffler) including scraping as reqd. for 9
M long pole type 'A'
21-265 - Ditto - but upto 11M long pole type 'B' 167.10 130.80 152.20 121.00

21-266 - Ditto - but upto 12 M long pole type 'C' 172.00 133.00 159.20 123.00
21-267 Painting of garden/Street light pole upto
5M height square type 'E' or similar with
114.93 76.00 108.93 70.00
best quality enameled paint.

Per Pole

375
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-268 Writing of pole number (Figure / Letter)
with white enamelled paint on black
enamelled paint background figure / letter 74.00 - - -
size not less than 38 mm.

376
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

Per Plate / board Rate in Taka

21-269 Writing / re-writing of danger sign plate

with reqd paint as Spd. 112.80 - - -

Other authorized painting

& figure/letter writing Rate is to be taken from similar item of painting works (section 15)
works

Rate in Taka
Materials and Add to if
INSULATOR Labour
Fixing Only
fixed in R/R
Each
21-270 Insulator glazed porcelain vitreous of glass caps with
galvanized pin type for low &medium tension O/H
distribution line. 140.00 27.50 14.00

21-271 - Ditto - but for 11KV high tension line 447.00 45.40 22.70
21-272 Insulator shackle glazed for low &medium tension O/H
distribution line 75X87.5 mm for tangent pole & service
poles cross arm 94.80 22.90 11.50

21-273 - Ditto -but 100x112.5 mm for terminal/section 111.40 27.50 13.80

pole.
21-274 Insulator glazed porcelain disk type for 11Kv HT O/H 967.00 68.90 34.40
distribution line (single)

21-275 - Ditto - but (double) 1888.00 91.80 45.90

Normal Bridle
STAY/GUY
type type

Each A B
21-276 Stay/Guy assemblies, fixing of stay wire complete including setting
in earth PCC casting with 1:4:8 at base of stay, and stay assembly 3,435.00 1,475.00
not exc. 14 meter in length complete with shaft excavation in any soil
with clamps nut / bolts etc.
21-277 - Ditto-as above but except cement. 3,308.00 1,348.00

21-278 Fixing including PCC casting & excavation with cement. 785.00 658.00

21-279 - Ditto- as above but except cement. 658.00 151.00

21-280 Add to fixed in repair / removal including PCC casting 658.00 658.00

377
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-281 - Ditto-as above but except casting. 345.00 345.00

21-282 Add to item No 21- 276 & 21-277 if rock 151.00 151.00

21-283 Add to item No 21-276 & 21-277 if stay assembly galvanized. 430.00 430.00

378
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

STAY/GUY Rate in Taka

Materials and Add to if fixed

Each Fixing Only
Labour in R/R

21-284 Stay /Guy assemblies fixing of stay wire, head type not
exceeding 15 metre in length 1880.00 275.00 137.70

OVER HEAD LINE COPPER CONDUCTOR Rate in Taka

Materials and Add to if fixed

Per Metre Fixing Only
Labour in R/R

21-285 Stringing, straining, tensioning and binding copper

conductor bare solid or stranded 8.30 sq. mm cross
80.40 3.90 2.00
section (10SWG)

21-286 - Ditto - but 12.97 sq. mm (8SWG) 124.60 4.60 2.30

21-287 - Ditto - but 18.68 sq. mm (6SWG) 176.00 5.50 2.80

21-288 - Ditto - but 27.27 sq. mm (4SWG) 255.40 6.90 3.40

21-289 - Ditto - but 38.60 sq. mm (2SWG) 360.00 8.30 4.10

21-290 - Ditto - but 45.60 sq. mm (1SWG) 424.00 9.20 4.60

21-291 - Ditto - but 53.19 mm2 498.00 13.80 6.90

21-292 - Ditto - but 61.36 mm2 572.00 13.80 6.90

21-293 - Ditto - but 70.12 mm2 655.00 17.40 8.70

21-294 - Ditto - but 81.14 mm2 754.00 17.40 8.70

2
21-295 - Ditto - but 95.00 mm 843.00 17.40 8.70

21-296 - Ditto - but 120.00 mm2 1,210.00 21.60 10.80

379
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

2
21-297 - Ditto - but 150.00 mm 1759.00 25.10 12.60

380
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

BARE ALUMINIUM CONDUCTOR (AAC) Rate in Taka

Materials and Add to if fixed

Per Metre Fixing Only
Labour in R/R

21-298 Stringing, straining, tensioning and binding of

aluminium contractor stranded AAC. cross sectional area
20.89sq.mm (code word MIDGE) equivalent cu area. 71.00 3.40 1.70
13mm

21-299 - Ditto - but 26.56 sq. mm (GNAT) 16mm 42.30 3.40 1.70

21-300 - Ditto - but 32.37 sq. mm (MOSQUITO) 20mm 51.20 3.90 2.00

21-301 - Ditto - but 42.33 sq. mm (LADY BIRD) 25mm 66.00 3.90 2.00

21-302 - Ditto - but 52.26 sq. mm (ANT) 30mm 80.90 4.60 2.30

21-303 - Ditto - but 62.86 sq. mm (FLY) 40mm 96.80 4.60 2.30

21-304 - Ditto - but 72.84 sq. mm (BLUE BOTTE) 45mm 113.00 6.90 3.40

21-305 - Ditto - but 77.70 sq. mm (EAR WIG) 48mm 121.00 6.90 3.40

21-306 - Ditto - but 83.13 sq. mm (GRASS HOPPER) 129.00 6.90 3.40
50mm

21-307 - Ditto - but 94.56 sq. mm (CLEGG) 60mm 147.00 9.20 4.60

21-308 - Ditto - but 104.80 sq. mm (WASP) 65mm 167.00 13.80 6.90

Materials and Add to if fixed

BARE ALUMINIUM CONDUCTOR (ACSR) Labour
Fixing Only
in R/R

Per Metre

21-309 Stringing, straining, tensioning and binding of 52.80 4.60 2.30

aluminium contractor stranded (ACSR). cross sectional
area 20.71sq.mm code word SQUIRREL

21-310 - Ditto - but 25.92 sq. mm ( GOPHER) 65.40 5.50 2.80

21-311 - Ditto - but 31.21 sq. mm (WEASEL) 79.00 6.90 3.40

381
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-312 - Ditto - but 41.87 sq. mm (FERRET) 102.90 6.90 3.40

21-313 - Ditto - but 52.21 sq. mm (RABBIT) 132.00 8.60 4.30

21-314 - Ditto - but 104.93 sq. mm (DOG) 238.00 10.30 5.20

382
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

INSULATED ALUMINIUM Materials and Labour

CONDUCTOR (ACSR) Add to if fixed
Fixing Only
in R/R
Per Metre PVC INSULATED XLPE

21-315 Stringing, straining, tensioning and binding 92.00 80.80 13.80 6.90
of aluminium contractor stranded (ACSR).
cross sectional area 20.71sq.mm code word
SQUIRREL

21-316 - Ditto - but 25.92 sq. mm (GOPHER) 88.90 127.40 17.20 8.60

21-317 - Ditto - but 31.21 sq. mm (WEASEL) 109.30 109.30 20.70 10.30
21-318 - Ditto - but 41.87 sq. mm (FERRET) 149.00 149.00 24.10 12.00
21-319 - Ditto - but 52.21 sq. mm (RABBIT) 203.00 203.00 25.50 12.70

21-320 - Ditto - but 104.93 sq. mm (DOG) 249.00 249.00 27.50 13.80

INSULATED ALUMINIUM (AAC) CONDUCTOR Rate in Taka

Materials and Add to if fixed

Per Metre Fixing Only
Labour in R/R
21-321
Stringing, straining, tensioning and binding of
aluminium contractor stranded AAC. cross sectional area 76.10 11.50 5.70
20.89sq.mm (MIDGE)

21-322 - Ditto - but 28.84 sq. mm (GNAT) 77.20 12.50 6.30

21-323 - Ditto - but 52.84 sq. mm (ANT) 135.90 13.80 6.90

21-324 - Ditto - but 78.58 sq. mm (EARWIG) 164.00 15.30 8.00

21-325 - Ditto - but 106.00 sq. mm (WASP) 197.00 17.20 9.00

JUMPER COPPER Materials & Labour

Add to if fixed
Deduct if Fixing Only
Insulated copper in R/R
Each Bare conductor clamps/Line tap
conductor / cable
not provided

21-326 Jumpering with bare or

stranded or insulated
conductor not exc. 1.5 M in 455.00 502.00 251.00 73.60 36.80
length including 2xPG
clamps/Line taps for 8.30 sq.
21-327 - Ditto - but 12.97sq. mm 488.00 566.00 251.00 73.60 36.80

21-328 - Ditto - but 18.68sq. mm 566.00 714.00 251.00 81.80 40.90

383
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-329 - Ditto - but 27.27sq. mm 673.00 976.00 251.00 81.80 40.90

21-330 - Ditto - but 38.68sq. mm 811.00 1,198.00 251.00 92.10 46.00

384
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

JUMPER COPPER Materials & Labour

Add to if fixed
Deduct if Fixing Only
Insulated copper in R/R
Each Bare conductor clamps/Line tap
conductor / cable
not provided

21-331 - Ditto - but 45.60sq. mm 892.00 1,198.00 251.00 92.10 46.00

21-332 - Ditto - but 53.19sq. mm 990.00 1,578.00 251.00 98.20 49.10

21-333 - Ditto - but 61.36sq. mm 1,088.00 1,578.00 251.00 98.20 49.10

21-334 - Ditto - but 70.12sq. mm 1,218.00 2,091.00 251.00 122.70 61.40

21-335 - Ditto - but 81.14sq. mm 1188.00 2091.00 251.00 122.70 61.40

21-336 - Ditto - but 95.00sq. mm 11784.00 2719.00 251.00 147.30 73.60

21-337 - Ditto - but 120.00sq. mm 1,714.00 2,719.00 251.00 147.30 73.60

21-338 - Ditto - but 150.00sq. mm 1,924.00 2,719.00 251.00 147.30 73.60

JUMPER ALUMINIUM (AAC) Materials & Labour
Add to if fixed
Insulated Al Deduct if Fixing Only
Bare AAC/ in R/R
Each ACSR conductor
conductor / A2xY clamps/Line tap
cable not provided

21-339 - Ditto - but 20.89sq. mm 377.00 455.00 251.00 73.60 36.80

21-340 - Ditto - but 26.56sq. mm 385.00 503.00 251.00 73.60 36.80

21-341 - Ditto - but 32.37sq. mm 416.00 552.00 251.00 81.80 40.90

21-342 - Ditto - but 42.33 sq. mm 440.00 594.00 251.00 92.10 46.00

21-343 - Ditto - but 52.86sq. mm 461.00 613.00 251.00 92.10 46.00

21-344 - Ditto - but 62.86 sq. mm 486.00 613.00 251.00 92.10 46.00

21-345 - Ditto - but 72.89 sq. mm 522.00 683.00 251.00 105.20 52.60

21-346 - Ditto - but 77.70 sq. mm 532.00 683.00 251.00 105.20 52.60

21-347 - Ditto - but 83.13 sq. mm 569.00 700.00 251.00 122.70 61.40

21-348 - Ditto - but 94.56 sq. mm 588.00 800.00 251.00 122.70 61.40

21-349 - Ditto - but 104.80 sq. mm 635.00 824.00 251.00 147.30 73.60
JUMPER ALUMINIUM (ACSR)
Each

21-350 - Ditto - but 20.71 sq. mm 423.00 450.00 251.00 98.20 49.10

385
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-351 - Ditto - but 25.91 sq. mm 455.00 496.00 251.00 113.30 56.60

21-352 - Ditto - but 31.21 sq. mm 475.00 540.00 251.00 113.30 56.60

21-353 - Ditto - but 41.87 sq. mm 487.00 584.00 251.00 87.80 43.90

21-354 - Ditto - but 104.93 sq. mm 544.00 707.00 251.00 105.40 52.70

386
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

GUARD / EARTH WIRE (GI) Rate in Taka

Materials & Add to if fixed

Per Metre Fixing Only
Labour in R/R

21-355 Stringing, Straining, Tensioning and binding of MS

medium drawn GI wire, stranded 8.30 sq. mm (10SWG) 14.80 3.50 2.00

21-356 - Ditto - but 12.97 sq. mm (8SWG) 23.30 3.50 2.00

21-357 - Ditto - but 18.68 sq. mm (6SWG) 27.90 3.50 2.00

Pole Earthing Rate is to be taken from similar item of work as described in sec. 22

Materials & Labour

CRADLE / CATCH GUARD Add to if fixed
8.30 sq. mm 12.97 sq. mm 18.67 sq. mm Fixing Only
in R/R
Each A B C
21-358 Cradle type catch guard Ms
drawn G I wire for horizontal
70.40 73.00 111.90 35.10 18.00
line LT/HT

21-359 Box type catch guard MS

drawn GI wire including
50X57mm insulator for 3
phase 4 wire with street light
229.00 242.00 257.00 46.80 23.00
conductor for vertical law
tension line.

21-360 - Ditto - but for 1 phase

2 wire or 3 phase 3 wire
vertical LT line 189.00 219.00 227.00 40.10 20.00

Per sq.m
21-361 Catch / cradle guard netting
with 8/10 SWG GI wire
600x600mm mesh as per
direction of Engineer.-in- 67.80 82.00 103.00 14.00 7.00
charge.

POLE BAND / CLAMP

Materials & Add to fixed in
Each Fixing only Add to if galv.
Labour R/R

387
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-362 Pole band/clamps with MS/F I bars for
shackle insulator/stay as where used.
258.00 46.80 23.00 -

21-363 Non/anti climbable devices made with

MS/F I and round bars as spd. 424.00 46.80 23.00 -

388
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

DANGER SIGN / POSTER / DISPLAY BOARD. Rate in Taka

Materials & Add to fixed in

Each Fixing only Add to if galv.
Labour R/R
21-364 Danger sign plate for HT / LT pole electric
or installation as reqd.sign plate size not
less than 250 mm x 120 mm complete as 200.00 46.80 23.00 -
spq. including writing.

Per sq.m
21-365 Display / poster plate made with 20BG
plain sheet and FI bar as required with
25x40 mm hard wood boarding complete
2506.00 70.20 35.00 -
in all respect including painting and letter.

21-366 Phase indicator as spd. 47.90 20.40 10.00

Materials & Add to fixed in
SERVICE BOX ETC. Labour
Fixing only
R/R

Each

21-367 Line tap / PG clamp for up to 45 mm2 154.00 28.10 14.00

21-368 - Ditto - but upto 95 mm2 154.00 28.10 14.00

21-369 - Ditto - but over 95 mm2 161.00 35.10 18.00

21-370 Service bale including cutting, forming from

copper/aluminium conductor with two crime pit joint for
190.00 46.80 23.40
line / phase

21-371 - Ditto - but one crime pit joint for street light
95.20 23.40 12.00

21-372 Service box PDB type and quality including connecting

cables from line to box busbar complete with anchoring
bracket and consumable suitable for 3 phase 4,400.00 468.00 234.00

Materials & Add to fixed

SERVICE BRACKET (GI) Fixing only
Labour in R/R
Each
21-373 Service bracket comprising GI tubing 4.5 M long with 2
nos. bands 90 degree with wood/rubber bushes both
ends necessary nuts & bolts, stay wire etc. 50 mm dia. 4,327.00 275.00 138.00

21-374 - Ditto - but 38/32mm dia. 3,602.00 275.00 138.00

389
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-375 - Ditto - but 25mm dia. 2,303.00 169.60 85.00

390
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
Rate in Taka
CATENARY SERVICE
Materials & Labour
Add to fixed in
Fixing only
R/R
2Xsingle core Twin Core
Per metre
A2xY aluminium Druplex

21-376 Catenary service connection from nearer

LT distribution source with aluminium SC
cables A2xY / Druplex copper cable as
spd. fixed with brass link clips at 300 mm
interval and 2 nos insulator at both ends,
68.30 101.20 13.20 7.00
size of cable 2.5 re/rm (7/029) other than
eastern run on 12 SWG GI wire.

21-377 - Ditto - but 4 re / rm run on 10 SWG 95.70 138.00 13.20 7.00

GI wire.

21-378 - Ditto - but 6 re / rm run on 10 SWG 123.60 288.00 13.20 7.00

GI wire.

21-379 - Ditto - but 10 re / rm run on 8 SWG 198.00 269.00 13.80 7.00

GI wire.

TENSION / STRAINING CLAMPS Materials & Labour

Add to fixed in
Aluminium Fixing only
Each Copper conductor R/R
conductor
A B
21-380 Tension/Straining clamp for HT or LT over
head distribution line. 464.00 464.00 43.90 22.00

Materials & Add to fixed in

FUSE AERIAL Labour
Fixing only
R/R
Each
21-381 Fuse aerial complete with 500 mm length connection 66.50 32.90 16.00
cable suitable for 5 Amps.

21-382 - Ditto - but for 10 Amps 70.60 32.90 16.00

21-383 - Ditto - but for 15 Amps 77.20 32.90 16.00

21-384 - Ditto - but for 30 Amps 106.80 43.90 22.00

21-385 - Ditto - but for 60 Amps 188.00 43.90 22.00

391
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-386 - Ditto - but for 100 Amps 245.00 43.90 22.00

392
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

STREET / PERIMETER LIGHT FIXTURE Rate in Taka

Materials & Add to fixed in

Each Fixing only
Labour R/R

21-387 Bracket exterior water tight galv. swan projection type

including GI tubing upto 1.5 metre long angle back plate
reflector and complete in all respect with 12 mm dia 592.00 68.90 34.00
tubing.

21-388 - Ditto - but 19 mm dia. 716.00 68.90 34.00

Materials & Labour
Add to fixed in
Single Fixture Double Fixture Fixing only
R/R
A B

21-389 Street / Road / Perimeter tube light fixture

complete with reflector, perfex shade, cover,
choke, starter, holder, bracket, clamp etc.
suitable for 1220 mm 40 watt. tube (except
tube, is to be paid separately) CTLS 28x1x40 3,848.00 4647.00 172.10 86.10
or GTF-765x1x40 (single) / CTLS 25x2x40 or
GTF- 768x2x40 (Double)

21-390 - Ditto - as above item but except 2,648.00 3447.00 129.10 64.60
bracket for 1220 mm 40 watt.

21-391 - Ditto - as above item no 21-389 CTLS

28x1x20 / 25x2x20 watt but for 610 mm. 2,887.00 3,639.00 137.70 69.00

21-392 - Ditto - as above item no 21-391 but 1,730.00 2,482.00 103.30 51.70
except bracket for 610 mm 20 watt.

21-393 - Ditto - but 1220 mm 40 watt. fixture

only (except all fittings i.e. choke,
starter, holder etc) 1,569.00 1882.00 131.70 65.90

21-394 - Ditto - but 610 mm 20 watt. 886.00 1063.00 131.70 65.90

Materials & Add to fixed in
Fixing only
Labour R/R

21-395 S/F of Perimeter /road / street lamp fixtures complete

with bracket, reflector, mercury bulb 160 watt etc 230
volts Crescent cat no. CST-1001 (N) 2,171.00 143.70 71.80

393
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-396 S/F of Perimeter/road/ street lamp fixtures complete with
bracket, reflector, mercury bulb 160 watt etc 230 volts
Crescent cat no. CST-1004 2,527.00 143.70 71.80

21-397 S/F of Perimeter/road/ street lamp fixtures complete with

bracket, reflector, mercury bulb 160 watt etc 230 volts
Crescent cat no. CST-1004 (N) 3,325.00 143.70 71.80

394
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

LAWN / GATE LIGHT Materials & Labour Add to if

Fixing only Cost of Lamp
fixed in r/r
Each set Crescent Gloria
21-398 Lawn light fancy, having with
38mm dia GI pipe stand, upto 2m
height as reqd with 200 watt
ordinary lamp, umbrella type
complete crescent cat no. GGDL- 4,855.00 3,914.00 263.00 131.70 74.80
256 including base foundation
(with bulb)

21-399 - Ditto - but crescent cat no. CG-

Mush-8 / Gloria cat no. GGDL-
255 (with bulb) 4,940.00 4,608.00 263.00 131.70 77.00

21-400 - Ditto - but crescent cat no.

CGL-52 / Gloria cat no. GBL-
12,974.00 7,606.00 439.00 219.50 326.00
253 (with 25 watt energy saving
bulb)
21-401 - Ditto - but crescent cat no.
CGL-79 (with 25 watt energy 14,102.00 - 439.00 220.00 326.00
saving bulb)

21-402 - Ditto - but Crescent cat no CG-

80Gloria cat no. GGL-154 2,255.00 2,028.00 329.00 165.00 -

Rate in Taka

Materials & Add to fixed in

Each Fixing only
Labour R/R
21-403 S/F of Lawn/Garden light fixtures fancy complete with GI
pipe stand bricks foundation Crescent Cat No. CGL-10 as
spd.
3,508.00 71.80 36.00

21-404 S/F of Lawn/Garden light fixtures fancy complete with GI

pipe stand bricks foundation Crescent Cat No. CGL-48 as
spd. 6,451.00 71.80 35.90

21-405 S/F of Lawn/Garden light fixtures fancy complete with GI

pipe stand bricks foundation Crescent Cat No. CGL-49 as
spd.
3,129.00 143.70 71.80

21-406 S/F of Gate light fixtures fancy rectangular Crescent Cat No.
CG-22 as spd.
2,313.00 71.80 35.90

395
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

FLOOD/ HALOGEN /
Materials & Labour Add to if
SODIUM LIGHT Fixing only
fixed in r/r
Cost of Lamp

Each Crescent Gloria

21-407 Flood /search light shade
complete with heat proof glass &
300/500 watt lamp crescent cat 4,373.00 2,279.00 131.70 65.85 165.00
no. CFLD-3 / Gloria cat no. GFL-
710.
21-408 - Ditto - but 1000 watt lamp
with heat proof glass crescent cat
no. CFLD 1 or 3 / GFL-711 or 4,553.00 2,306.00 131.72 66.00 165.00
GFL 705.

21-409 Halogen light shade complete

with 500 watt foreign origin lamp
as per to Gloria cat no. GFL-715 0.00 5,113.00 263.00 131.70 275.00
as approved by Engineer-in-
Charge
21-410 - Ditto - but 1000 watt as per to
Gloria cat no. GFL-H-709 as
approved by Engineer-in-Charge 0.00 8,645.00 263.00 131.70 605.00

21-411 Sodium light shade complete with

low pressure lumenier of 230
volt, 50 Hz, 90 watt including all
foreign origin accessories like
lamp, ignator, capacitor, ballast, 0.00 18,222.00 659.00 329.00 1,958.00
holder etc as per to Gloria cat no.
GSLF-797 as approved by
Engineer-in-Charge (with bulb)

21-412 - Ditto - but High pressure 0.00 18,426.00 659.00 329.00 2,750.00
250 watt as spd (with bulb)

Materials & Add to fixed in

Each Fixing only
Labour R/R

21-413 Sodium lamp fixture complete (Philips) with low pressure 90

watt bulb, ignator, choke, capacitor, fibre glass shade & other
fittings. Made in Italy 11,340.00 743.00 372.00

21-414 S/F of Ballest 220 Volts 50 Hz for high pressure Sodium /

Metal Halide lamps 400 watt foreign made 2,479.00 239.00 119.70

21-415 - Ditto - but for Low pressur 55 - 90 watt.

2,778.00 239.00 119.70
21-416 S/F of Capacitors 220 Volts 50 Hz for high pressure Sodium
/ Metal Halide lamps foreign made 10 - 25 MFD. 629.00 120.00 59.90

396
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-417 S/F of Capacitors 220 Volts 50 Hz for high pressure Sodium /
Matal halide lamps foreign made 40 MFD.. 629.00 119.70 59.90

21-418 S/F of Ignator 220 Volts 50 Hz for high pressure Sodium /

Metal halide lamps 90 - 400 watt foreign made 1,593.00 95.80 47.90

397
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

FLOOD/ HALOGEN / SODIUM LIGHT Rate in Taka

Materials & Add to fixed in
Each Fixing only
Labour R/R

21-419 Supply and fixing of High pressure Mercury lamps 250 volts
400 watt Philips made in Holland model HPL-N. 2,317.00 71.80 35.90

21-420 S/F of Metal halied lamp fixtures complete with reflector,

ballast, capacitor, ignator, holder, bulb etc. 250 volts 400 watt
11,085.00 464.00 232.00
foreign made.

21-421 S/F of Metal halied lamp fixtures complete with reflector,

ballast, capacitor, ignator, holder, bulb etc. 250 volts 250 watt
foreign made. 10,461.00 371.00 185.60

Fluorescent tube and light fittings i.e.

Rate is to be taken from similar item works as
choke starter, holder etc. as reqd. for
described in section -22 (internal electrification)
maintenance.

MDB WITH BREAKER Materials & Labour with MCB /

(MCB / MCCB) MCCB
Add to if Add / Deduct
Fixing only
MEM / DORMAN fixed in r/r breaker
Each set LG, Korea (England) SIEMENS
/ AEG (Garmany)

21-422 Main distribution board (MDB) Cost is to be

fabricated with 16 BG, MS / plain taken from
sheet, FI bar and specified MCCBs / sec-22
busbar etc including hammer paints &
locking arrangement consisting of 9,867.00 22,157.00 191.60 95.80
foreign origin MCB / MCCBs
1x30A, TP incoming, 10x20 Amps +
1x10 Amps SP outgoing MCB /
MCCB.
21-423 - Ditto - but 1x40A, TP incoming &
4x20A, + 1x15A SP outgoing 10,786.00 25,236.00 239.00 119.70
MCCBs

21-424 - Ditto - but 1x50/60A, TP incoming

& 8x20A, 1x15A SP outgoing
MCCB
12,289.00 29,042.00 319.00 159.60

21-425 - Ditto - but 1x60A, TP incoming &

3x30A, TP + 1x5A SP outgoing
16,241.00 61,362.00 319.00 159.60
MCB / MCCB

21-426 - Ditto - but 1x60A, TP in coming &

2x40A, TP + 1x5A SP outgoing
MCB / MCCB
14,743.00 51,315.00 319.00 159.60

21-427 - Ditto - but 1x100A, TP incoming &

4x30A, TP + 1x10A SP outgoing
MCB / MCCB
21,512.00 79,159.00 479.00 239.00

398
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-428 - Ditto - but 1x100A, TP in coming
& 2x60A, TP + 1x10A SP out going
17,309.00 58,420.00 479.00 239.00
MCB / MCCB

399
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

MDB WITH BREAKER Materials & Labour with MCB /

(MCB / MCCB) MCCB
Add to if Add / Deduct
Fixing only
MEM / DORMAN fixed in r/r breaker
Each set LG, Korea (England) SIEMENS
/ AEG (Garmany)

21-429 - Ditto - but 1x200A, TP incoming, Cost is to be

8x30A, TP & 1x10A SP outgoing taken from
34,700.00 144,026.00 958.00 479.00
MCB / MCCB sec-22

21-430 - Ditto - but 1x200A, TP in coming

& 4x60A, TP + 1x10A SP out going
MCB / MCCB
25,057.00 101,886.00 958.00 479.00

21-431 - Ditto - but 1x250A/300A, TP

incoming & 10x30A, TP + 1x10A SP
outgoing MCB / MCCB 46,456.00 223,146.00 1,317.00 659.00

21-432 - Ditto - but 1x250A/300A, TP

incoming & 3x100A, TP + 1x30A SP
outgoing MCB / MCCB
33,160.00 148,690.00 1,317.00 659.00

MDB as reqd other than

Rate is to be taken from similar item of works as described in section 22.
above specification

CONTROL / PROTECTION DEVICES Materials & Labour

Add to fixed
Fixing only
in r/r
With steel Without steel
Each
structure structure
21-433 11 KV gang isolator / disconnector complete
with all fixing steel structure/cross arms,
clamps nut, bolts & link fuses having capacity 73,354.00 67,954.00 2,095.00 1,048.00
upto 320 amps.

21-434 11 KV drop out fuses complete with fixing

arrangement on steel structure, having capacity
upto 100 amps 7,786.00 5,986.00 698.00 349.00

21-435 11 KV lighting arrestor complete with fixing

arrangement as required but without earthing
(earthing is to be paid seperatly) having 6,749.00 4,949.00 718.00 359.00
maximum permissible stress 12.7 kilo volts

21-436 Change over switch 500 volts TP & N

complete with all accessories approved quality
local made having capacity 200 amps 19,458.00 - 1,317.00 659.00

21-437 - Ditto - but 400 amps 32,762.00 - 1,317.00 659.00

400
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-438 - Ditto - but 600 amps 47,274.00 - 1,317.00 659.00

401
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

Rate in
CONTROL / PROTECTION DEVICES
Taka
Installation with Checking
Materials &
Each testing testing Add if fixed r/r
Labour commissioning commissioning

21-439 11 KV switch gear panel (LBS) complete with

all accessories upto 630 amps all as per
manufacuter specification held with MES 691,309.00 17,830.00 13,160.00 2,335.00
concern office for brand Energypac

21-440 - Ditto - but brand GEC 653,231.00 17,830.00 13,160.00 2,335.00

21-441 Supply and Installation of switchgear 11 KV

(VCB), 3 phase, 50 Hz, 630 amps drawout
type breaker without KWH meter complete
with all monitoring meter, protective devices as
required for the satisfaction of the local PDB
authority as per manufacturer detail 1,224,403.00 17,830.00 13,160.00 2,335.00
specification held with concern MES office
comprising foreign components but locally
assembled brand GEC

21-442 - Ditto - but Brand Energypac (without

KWH meter)
1,478,257.00 17,830.00 13,160.00 2,335.00

21-443 - Ditto - but Brand Micro (without

KWH meter)
1,019,643.00 17,830.00 13,160.00 2,335.00

21-444 Supply and Installation of switchgear 11 KV

(VCB), 3 phase, 50 Hz, 630 amps drawout
type breaker with KWH meter complete with
all monitoring meter, protective devices as
required for the satisfaction of the local PDB
authority as per manufacturer detail 1,246,980.00 20,883.00 14,956.00 2,964.00
specification held with concern MES office
comprising foreign components but locally
assembled brand GEC

21-445 - Ditto - but Brand - - - -

21-446 - Ditto - but Brand Energypac 1,538,206.00 20,883.00 14,956.00 2,964.00

21-447 - Ditto - but Brand Micro 1,401,017.00 20,883.00 14,956.00 2,964.00

402
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

CONTROL / PROTECTION DEVICES Rate in Taka

Erection Checking
Materials & Add if fixed
Each installation with testing
Labour accessories commission
r/r

21-448 LT switch gear panel 400/440 volt, 3 phase, 50

Hz, complete with all accessories / control /
protective devices foreign components but
locally assembled by GEC having capacity 200
amps (Adjustable) incoming and (200x1.25%) 443,990.00 8,122.00 3,452.00 2,335.00
250 amps total out going breakers capacity to
control 100 KVA sub-station:

21-449 - Ditto - but Brand - - - -

21-450 - Ditto - but Brand Energypac 311,046.00 8,122.00 3,452.00 2,335.00

21-451 - Ditto - but Brand Micro 150,740.00 8,122.00 3,452.00 2,335.00

21-452 LT switch gear panel 400/440 volt, 3 phase, 50

Hz, complete with all accessories / control /
protective devices foreign components but
locally assembled by GEC having capacity 600
amps (Adjustable) incoming and (600x1.25%) 676,840.00 10,220.00 5,280.00 2,470.00
750 amps total out going breakers capacity to
control 200 - 400 KVA sub-station:

21-453 Blank - - - -

21-454 - Ditto - but Brand Energypac 528,590.00 10,220.00 5,280.00 2,470.00

21-455 - Ditto - but Brand Micro 342,519.00 10,220.00 5,280.00 2,470.00

21-456 LT switch gear panel 400/440 volt, 3 phase, 50

Hz, complete with all accessories / control /
protective devices foreign components but
locally assembled by GEC having capacity 800
amps (Adjustable) incoming and (800x1.25%) 677,828.00 11,207.00 5,280.00 2,964.00
1000 amps total out going breakers capacity
to control 500 - 600 KVA sub-station:

21-457 Blank - - - -

21-458 - Ditto - but Brand Energypac 571,018.00 11,207.00 5,280.00 2,964.00

403
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-459 - Ditto - but Brand Micro 381,825.00 11,207.00 5,280.00 2,964.00

404
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

CONTROL / PROTECTION DEVICES Rate in Taka

Fixing incl
Add fixed in
Each GEC Energypac Micro testing
R/R
commissioning

21-460 LT Auto PFI 400/440 volt, 3

phase, 50 Hz complete with all
accessories with foreign
components locally assembled all 171,444.00 264,085.00 170,886.00 10,956.00 5,478.00
as per manufacturer specification
having capacity 40 KVAr

21-461 - Ditto - but 100 KVAr 362,062.00 354,192.00 243,034.00 10,956.00 5,478.00

21-462 - Ditto - but 160 KVAr 584,094.00 517,697.00 333,175.00 12,783.00 6,391.00

21-463 - Ditto - but 200 KVAr 655,785.00 998,186.00 390,528.00 12,783.00 6,391.00

21-464 - Ditto - but 300 KVAr 870,921.00 810,405.00 533,972.00 15,567.00 7,783.00

POWER TRANSFORMER Rate in Taka

Erection
Checking
Materials & installation Add if fixed
Each testing
Labour with r/r
commission
accessories
21-465 Pole mounted distribution power transformer 11/0.4
KV, 50 Hz, 3 phase, 100 KVA capacity complete
as per manufacturer detail specification exist in 582,752.00 10,040.00 6,209.00 1,916.00
concern MES office, brand GEC

21-466 - Ditto - but 100 KVA Energypac 582,752.00 10,040.00 6,209.00 1,916.00

21-467 - Ditto - but 100 KVA GEM 410,622.00 10,040.00 6,209.00 1,916.00

21-468 - Ditto - but 100 KVA Micro 483,749.00 10,040.00 6,209.00 1,916.00

21-469 - Ditto - but 100 KVA BETELCO 427,551.00 10,040.00 6,209.00 1,916.00

21-470 - Ditto - but 200 KVA GEC 806,072.00 11,238.00 6,209.00 2,515.00

21-471 - Ditto - but 200 KVA Energypac 814,693.00 19,859.00 6,209.00 6,825.00

21-472 - Ditto - but 200 KVA GEM 624,213.00 11,238.00 6,209.00 2,515.00

21-473 - Ditto - but 200 KVA Micro 652,490.00 11,238.00 6,209.00 2,515.00

21-474 - Ditto - but 200 KVA BETELCO 623,225.00 11,238.00 6,209.00 2,515.00

21-475 - Ditto - but 250 KVA GEC

935,328.00 13,567.00 7,819.00 2,874.00

21-476 - Ditto - but 250 KVA Energypac

966,868.00 13,567.00 7,819.00 2,874.00

405
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-477 - Ditto - but 250 KVA GEM
771,879.00 13,567.00 7,819.00 2,874.00

21-478 - Ditto - but 250 KVA Micro

761,438.00 13,567.00 7,819.00 2,874.00

21-478A - Ditto - but 250 KVA BETELCO 761,438.00 13,567.00 7,819.00 2,874.00

406
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

POWER TRANSFORMER Rate in Taka

Erection
Checking
Materials & installation Add if fixed
Each testing
Labour with r/r
commission
accessories
21-479 - Ditto - but 300 KVA Micro
847,066.00 15,423.00 7,819.00 3,802.00

21-480 - Ditto - but 300 KVA GEC

1,127,778.00 15,423.00 7,819.00 3,802.00

21-481 - Ditto - but 300 KVA Energypac

1,207,107.00 15,423.00 7,819.00 3,802.00

21-482 - Ditto - but 300 KVA GEM

892,484.00 15,423.00 7,819.00 3,802.00

21-483 - Ditto - but 400 KVA Energypac

1,370,101.00 20,392.00 10,813.00 4,790.00

21-484 - Ditto - but 400 KVA Micro / BETELCO

996,840.00 20,392.00 10,813.00 4,790.00

21-485 - Ditto - but 400 KVA GEC

1,264,967.00 20,392.00 10,813.00 4,790.00

21-486 - Ditto - but 500 KVA GEC

1,511,720.00 24,523.00 12,609.00 5,957.00

21-487 - Ditto - but 500 KVA Energypac

1,533,933.00 24,523.00 12,609.00 5,957.00

21-488 - Ditto - but 500 KVA GEM

1,236,672.00 24,523.00 12,609.00 5,957.00

21-489 - Ditto - but 500 KVA Micro / BETELCO

1,123,324.00 24,523.00 12,609.00 5,957.00

21-490 - Ditto - but 750 KVA GEC

2,253,980.00 30,606.00 18,632.00 5,987.00

21-491 - Ditto - but 750 KVA Energypac

1,936,663.00 30,606.00 18,632.00 5,987.00

21-492 - Ditto - but 750 KVA Micro / BETELCO

1,513,930.00 30,606.00 18,632.00 5,987.00

21-493 - Ditto - but 800 KVA GEC

2,253,980.00 30,606.00 18,632.00 5,987.00

21-494 - Ditto - but 800 KVA Energypac

2,412,639.00 30,606.00 18,632.00 5,987.00

21-495 - Ditto - but 1000 KVA GEC

2,780,763.00 49,681.00 32,438.00 8,621.00

21-496 - Ditto - but Single phase

6.35 / 0.24 KV
GEM 136,762.00 7,771.00 3,221.00 2,275.00
Transformer 10 KVA

407
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

SUB - STATION PANEL (LOCAL) Rate in Taka

Materials and Add to if fixed
Each Fixing only
Labour in r/r
21-497 Almirah type sub-station control panel 450mm depth 1300 mm width
and 1800 mm height fabricated with 3mm thick MS plain sheet cover
50x50x6.35mm angle and 50x6.35mm Fibars frame fixed by
welding/nut bolts as required with the provision for fixing of
incoming and out going MCCB's/panel meters including painting &
locking arrangement having with 4x500 amps copper busbar (bar 42,304.00 2,155.00 1,078.00
dimension not less than 40x12mmx1 meter long) complete with
necessary connecting insulating materials including testing &
commissioning

21-498 - Ditto - but 450mm depth 1500mm width and 1800mm

height having with 4x800 Amps copper bar (bar dimension
50,749.00 2,515.00 1,257.00
not less than 50x12mmx1 metre long)

21-499 - Ditto - but 450mm depth 1500mm width and 1800mm

height having with 4x1200 Amps copper bar (bar dimension
65,602.00 2,874.00 1,437.00
not less than 50x20mmx1 metre long)

21-500 Earthing with boring by sinking of 12 M G.I. tubing having 38mm

dia to be connected with suitable copper conductor not less than 2
11,924.00 1,969.00 984.00
SWG

21-501 Volt meter foreign origin (China) AC, O-500 volt. 966.00 67.90 33.90

PANEL METER Rate in Taka

Materials and Add to if fixed

Each Fixing only
Labour in r/r
21-502 Ammeter AC 220/230 volt 50 HZ foreign origin (China/ 738.00 67.90 34.00
Taiwan/ Korea) 50 Amps

21-503 - Ditto - but 50 Amps foreign origin (Germany / England) 1,325.00 67.90 34.00

- Ditto - but 100 Amps (China / Taiwan / Korea) with

21-504 1,965.00 143.70 71.80
suitable CT 100/5

- Ditto - but 200 Amps (China / Taiwan / Korea) with

21-505 2,151.00 143.70 71.80
suitable CT 200/5

- Ditto - but 500 Amps (China / Taiwan / Korea) with

21-506 2,458.00 143.70 71.80
suitable CT 500/5

- Ditto - but over 500 Amps (China / Taiwan / Korea) with

21-507 2,608.00 169.60 84.80
suitable CT

21-508 Selector switch foreign origin 1,095.00 169.60 84.80

21-509 Indicating Lamp electric panel type 154.00 4.00 2.00

408
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
Materials & Add if fixed Cost of re-fill
FIRE EXTINGUISHER Labour
Fixing only
in r/r in r/r
Each
21-510 Dry powder / Carbondi-oxide (CO2) fire 2,245.00 151.00 45.20 807.00
extinguisher foreign origin (China/Malyasia) 2
kg.

21-511 - Ditto - but 3 kg 2,515.00 151.00 45.20 903.00

21-512 - Ditto - but 5 kg 4,071.00 151.00 45.20 1,463.00

21-513 - Ditto - but (Germany) 1 kg 3,592.00 151.00 45.20 1,290.00

21-514 - Ditto - but 2 kg 5,508.00 151.00 45.20 1,979.00

21-515 Hellion gas fire extinguisher foreign origin 6,885.00 151.00 45.20 2,473.00
(Germany) 4 kg.

21-516 Foam type fire extinguisher foreign origin

(China) 8 litre capacity 1,317.00 151.00 45.20 237.00

21-517 Soda water type fire extinguisher foreign origin

(China) 8 litre capacity 1,257.00 151.00 45.20 226.00

MISC. ITEM Rate in Taka

Materials & Add if fixed in
Each Fixing only
Labour r/r
21-518 Battery charger output voltage 6v, 36 v & 48 v DC having
capacity 30 Amps 23,271.00 1,437.00 718.00

21-519 Automatic water level controlled with sensors having the

pump when the water level goes down to lower level and stop
the pump when the water level goes upto upper level of the 6,526.00 1,437.00 718.00
reservoir

21-520 Static inverter having capacity 1.5 KVA in put voltage 50v
DC & output voltage 230V AC 50 Hz complete with all
24,314.00 1,682.00 841.00
accessories

21-521 Supply and Installation of Auto Charge Over / Power

Transfer Switch 500 Volts, 3 Phase 50 Hz Complete with
foreign components foreign assembled in steel sheet cubical as 272,302.00 1,437.00 719.00
req. having Capacity 200 Amps

409
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-522 Under ground cable joint straight through with necessary
consumables required as per latest enginerring method
recognised by PDB / DESA / DESCO / REB (Trench
excavation and embankment is to be paid under relevant item
4,281.00 928.00 464.00
seperatly) for PVC / XLPE Low and medium tension (LT)
cable size 16 to 50 mm2 Single core.

21-523 - Ditto - but 2 (Two) core 5,113.00 1,281.00 641.00

21-524 - Ditto - but 3 (Three) core 7,963.00 1,377.00 689.00

21-525 - Ditto - but 31/2 / 4 (Three & half / Four) core 8,307.00 1,721.00 861.00

410
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

MISC. ITEM Rate in Taka

Materials & Add if fixed in

Each Fixing only
Labour r/r
21-526 Same as above item no 21-522 but size 70 to 150 mm2 Single 4,640.00 928.00 464.00
core.
21-527 - Ditto - but 2 (Two) core 5,772.00 1,281.00 641.00

21-528 - Ditto - but 3 (Three) core 7,304.00 1,377.00 689.00

21-529 - Ditto - but 31/2 / 4 (Three & half / Four) core 8,636.00 1,721.00 861.00
21-530 Same as above item no 21-522 but size over 150 mm Single 6,819.00 1,371.00 686.00
core
21-531 - Ditto - but 2 (Two) core 7,307.00 1,620.00 810.00

21-532 - Ditto - but 3 (Three) core 8,598.00 1,713.00 857.00

1
21-533 - Ditto - but 3 /2 / 4 (Three & half / Four) core 9,520.00 2,215.00 1,108.00

21-534 Under ground cable joint straight through with necessary

consumables required as per latest enginerring method
recognised by PDB / DESA / DESCO / REB (Trench
excavation and embankment is to be paid under relevant item
7,708.00 1,721.00 861.00
seperatly) for PVC / XLPE Armoured High tension (HT)
cable size 16 to 50 mm Single core

21-535 - Ditto - but 3 (Three) core 15,836.00 2,904.00 1,452.00

21-536 Same as above item no 21-534 but size over 50 mm Single 9,609.00 2,066.00 1,033.00
core

21-537 - Ditto - but 3 (Three) core 18,470.00 3,742.00 1,871.00

21-538 Supply and fixing of End Termination water resistance Heats

and Shrink Kits for 11 KV single core cable PDB type.
3,772.00 1,377.00 689.00

21-539 - Ditto - but 3 (Three) core 8,232.00 3,443.00 1,722.00

21-540 Supply and fixing of connecting / soldering Lugs for cable 124.00 69.50 35.00
2
size 4 to 16 mm

21-541 Supply and fixing of connecting / soldering Lugs for cable 145.00 86.80 43.00
size 25 to 50 mm2

21-542 Supply and fixing of connecting / soldering Lugs for cable 210.00 115.80 58.00
2
size 70 to 120 mm

411
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-543 Supply and fixing of connecting / soldering Lugs for cable 255.00 144.70 72.00
size 150 to 240 mm2

21-544 Supply and fixing of connecting / soldering Lugs for cable 414.00 216.00 108.00
2
size over 300 mm

412
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21- Supply and fixing of Under ground cable route / joint
545 sign plate (CI) size 150x100 mm with fixing stand
casted and embossed writeup in top row "11 KV",
middle row " CABLE LINE or CABLE JOINT", bottom 1,315.00 67.90 34.00
row MES (Army) or MES (Navy) or MES (Air) as and
where applicable.

Per square metre

21- Supply and fixing of cable duct / tray made with 18 BG
546 plain sheet (GP) perforated 6mm hole or non-
perforated supported with MS angle / FI / round bar
and fixed to ceiling, wall, beam, column etc.by rawl bolt 2,891.00 468.00 234.00
at an interval of 1 metre as required.

21- - Ditto - but 20 BG 2,315.00 484.00 242.00

547
New
Item
Rate in Taka

Erection Checking
Materials & Add if fixed
Each installation with testing
Labour accessories commission
r/r

21-459ASwitch gear LT 3200 amps 440 Volt 3 Phase

50 Hz complete with cubical & MCCB
(USA/Japan/UK) 1,179,475.00 17,135.00 5,280.00 5,927.00

POWER TRANSFORMER Rate in Taka

Erection
Checking
Materials & installation Add if fixed
Each testing
Labour with r/r
commission
accessories
21-549 Pole mounted distribution power transformer 11/0.4
KV, 50 Hz, 3 phase, 100 KVA capacity complete
as per manufacturer detail specification exist in 333,952.00 8,621.00 4,790.00 1,916.00
concern MES office, brand SKEI
21-550 TRANSFORMER 3 PHASE 11/.4 KV 50 C/S
200 KVA (SKEI) 549,489.00 8,621.00 4,790.00 1,916.00

21-551 TRANSFORMER 3 PHASE 11/.4 KV 50 C/S

250 KVA (SKEI) 639,296.00 8,621.00 4,790.00 1,916.00

21-552 TRANSFORMER 3 PHASE 11/.4 KV 50 C/S

315 KVA (SKEI) 908,716.00 8,621.00 4,790.00 1,916.00

21-553 TRANSFORMER 3 PHASE 11/.4 KV 50 C/S

500 KVA (SKEI) 986,549.00 8,621.00 4,790.00 1,916.00

413
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION
21-554 Pole mounted distribution power transformer 11/0.4
KV, 50 Hz, 3 phase, 50 KVA capacity complete as
per manufacturer detail specification exist in concern 310,003.75 8,621.00 4,790.00 1,916.00
MES office, brand GREEN POWER
21-555 - Ditto - but 100 KVA Green Power 459,682.00 8,621.00 4,790.00 1,916.00
21-556 - Ditto - but 150 KVA Green Power 594,392.00 29,576.00 ######## 5,987.00

POWER TRANSFORMER Rate in Taka

Erection
Checking
Materials & installation Add if fixed
Each testing
Labour with r/r
commission
accessories

21-557 - Ditto - but 200 KVA Green Power 684,199.00 29,576.00 ######## 5,987.00
21-558 - Ditto - but 250 KVA Green Power 809,929.00 29,576.00 ######## 5,987.00
21-559 - Ditto - but 300/315 KVAGreen Power 929,671.00 29,576.00 ######## 5,987.00
21-560 - Ditto - but 400 KVA Green Power 1,079,349.00 29,576.00 ######## 5,987.00
21-561 - Ditto - but 500 KVA Green Power 1,223,040.00 29,576.00 ######## 5,987.00
21-562 - Ditto - but 630 KVA Green Power 1,612,203.00 29,576.00 ######## 5,987.00
21-563 - Ditto - but 750/800 KVAGreen Power 1,875,637.00 29,576.00 ######## 5,987.00
21-564 - Ditto - but 1000 KVA Green Power 2,175,592.00 48,136.00 ######## 8,621.00
21-565 - Ditto - but 1250 KVA Green Power 2,594,691.00 48,136.00 ######## 8,621.00
21-566 - Ditto - but 1500 KVA Green Power 3,079,648.00 48,136.00 ######## 8,621.00
21-567 - Ditto - but 2000 KVA Green Power 4,001,665.00 48,136.00 ######## 8,621.00

Rate in
CONTROL / PROTECTION DEVICES
Taka
Installation with Checking
Materials &
Each testing testing Add if fixed r/r
Labour commissioning commissioning

21-568 IIKV HT SWITCH GEAR (LBS) with load

break switch 630 A,20KA (GREEN POWER) 497,566.00 17,830.00 13,160.00 2,335.00

21-569 IIKV HT SWITCH GEAR (VCB fixed) UPTO

630A with KWH Meter 3- phase, 50Hz 1,156,150.00 17,830.00 13,160.00 2,335.00
(GREEN POWER)
21-570 IIKV HT SWITCH GEAR (VCB) UPTO 630
A with KWH Meter & Drawable (GREEN 1,275,892.00 17,830.00 13,160.00 2,335.00
POWER)

414
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

Erection Checking
Materials & Add if fixed
Each installation with testing
Labour accessories commission
r/r

21-571 Switch gear LT 200 amps 440 Volt 3 Phase 50 Hz

complete with cubical & MCCB (GREEN POWER) 251,923.00 8,122.00 3,452.00 2,335.00

21-572
- Ditto - but 250 Amps Green Power 323,768.00 8,122.00 3,452.00 2,335.00

21-573
- Ditto - but 300/320 Amps Green Power 347,717.00 8,122.00 3,452.00 2,335.00

21-574
- Ditto - but 400 Amps Green Power 365,678.00 8,122.00 3,452.00 2,335.00

21-575
- Ditto - but 600/500 Amps Green Power 443,511.00 8,122.00 3,452.00 2,335.00

21-576
- Ditto - but 800 Amps Green Power 489,901.00 6,616.00 1,676.00 2,470.00

21-577
- Ditto - but 1000 Amps Green Power 611,734.00 7,035.00 2,095.00 2,470.00

21-578
- Ditto - but 1250 Amps Green Power 793,773.00 7,664.00 2,724.00 2,470.00

21-579
- Ditto - but 1600 Amps Green Power 927,268.00 8,125.00 3,185.00 2,470.00

21-579
- Ditto - but 2000 Amps Green Power 1,279,209.00 9,340.00 4,401.00 2,470.00

21-580
- Ditto - but 2500 Amps Green Power 1,449,112.00 9,927.00 4,987.00 2,470.00

CONTROL / PROTECTION DEVICES Rate in Taka

Fixing incl
Add fixed in
Each Green Power testing
R/R
commissioning

21-581 LT Auto PFI 400/440 volt, 3

phase, 50 Hz complete with all
accessories with foreign
components locally assembled all 228,082.00 10,956.00 5,478.00
as per manufacturer specification
having capacity 60 KVAr

21-582 - Ditto - but 90 KVAr 264,005.00 10,956.00 5,478.00

21-583 - Ditto - but 120 KVAr 299,927.00 10,956.00 5,478.00

21-584 - Ditto - but 150 KVAr 359,799.00 10,956.00 5,478.00

21-585 - Ditto - but 190 KVAr 407,696.00 10,956.00 5,478.00

21-586 - Ditto - but 240 KVAr 491,515.00 10,956.00 5,478.00

415
RESTRICTED
 RESTRICTED
SECTION-21
EXTERNAL ELECTRIFICATION
ITEM DESCRIPTION

21-587 - Ditto - but 300 KVAr 551,387.00 10,956.00 5,478.00

21-588 - Ditto - but 380 KVAr 719,026.00 10,956.00 5,478.00

21-589 - Ditto - but 480 KVAr 790,872.00 10,956.00 5,478.00

21-590 - Ditto - but 600 KVAr 910,614.00 10,956.00 5,478.00

21-591 - Ditto - but 750 KVAr 1,150,099.00 10,956.00 5,478.00

21-592 - Ditto - but 900 KVAr 1,329,713.00 10,956.00 5,478.00

21-593 - Ditto - but 960 KVAr 1,509,327.00 10,956.00 5,478.00

21-594 - Ditto - but 1200 KVAr 1,629,069.00 10,956.00 5,478.00

416
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka
WIRING (Batten) Materials & Labour
Teak with
brass coats Fixing Add to
Teak with brass
consumabl only fixed in r/r
Per point coated other
e using
than Eastern
cable
Eastern
22-1 One light, fan, bell controlled by one switch with pvc
sheathed single core cable 1.3/1.5 rm (3/.029) including
switch board final sub ckt, wooden batten and necessary 1415.00 1398.00 356.00 178.00
consumables

22-2 - Ditto - but without cables 775.00 775.00 231.20 115.60

22-3 - Ditto - but without cables & batten 557.00 557.00 124.50 62.00

22-4 - Ditto - but but without switch board 1239.00 1222.00 320.00 160.00

22-5 Add to each additional ckt controlled by more than one

switch/push 471.00 466.00 118.50 59.30

22-6 - Ditto -but without cables 258.00 258.00 77.00 38.50

22-7 - Ditto - but without cables & batten 185.50 185.50 41.50 20.60
22-8 One light, fan, bell controlled by two way switch complete
with all consumable switch board, final sub ckt etc using
2264.00 2237.00 570.00 285.00
pvc sheathed single core cable 1.3/1.5 rm (3/.029)

22-9 - Ditto - but without cables 1240.00 1240.00 370.00 185.00

22-10 - Ditto - but without cables & batten 891.00 891.00 199.20 99.20

22-11 - Ditto - but without switch board 1982.00 1955.00 512.00 256.00
22-12 Add to each additional ckt controlled by more than one
switch 754.00 745.00 189.80 94.90

22-13 - Ditto - but without cables 413.00 413.00 123.20 61.60

22-14 - Ditto - but without cables & batten 297.00 297.00 66.30 33.00
22-15 One three pin socket out let 5 amps controlled by one switch
with all consumable i.e. link clips screws, nails etc using
pvc sheathed 1.3/1.5 rm (3/.029) single core cable (from 665.00 660.00 178.00 89.00
switch board & light circuit).

22-16 - Ditto - without cable 444.00 444.00 115.70 57.90

22-17 - Ditto - but without cables & batten & earth conductor 201.30 201.30 62.30 31.00

22-18 - Ditto - but direct from DB / SDB. 1663.00 1650.00 312.00 155.80

22-19 - Ditto - without cable 1110.00 1110.00 202.50 101.30

22-20 - Ditto - without cable batten & earth conductor. 503.00 503.00 155.80 77.50

414
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-21 One three pin socket out let 15 amps controlled by one
switch with all consumable i.e. link clips screws, nails etc
using pvc sheathed 2.5 rm (7/.029) single core cable (direct 2037.00 2078.00 356.00 178.00
from SDB/DB).

22-22 - Ditto - without cable 894.00 894.00 231.00 115.60

22-23 - Ditto - without cables batten & earth conductor 402.00 402.00 124.50 62.20

415
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka
Wiring (Concealed conduit) Materials & labour
PVC
Steel conduit
Steel conduit conduit
with PVC conduit Fixing Add to
with with
consumable with consumable only fixed in r/r
Per point consumable consumabl
using cable using cable other
using cable e using
other than than Eastern
Eastern cable
Eastern
Eastern
22-24 One light, fan, bell controlled one
switch with pvc non-sheathed
single core cable 1.3/1.5 rm
(3/.029) including switch board 2972.00 2986.00 1356.00 1369.00 534.00 267.00
final sub ckt, conduit heavy gauze
and necessary consumables

22-25 - Ditto - with out cables 2407.00 2407.00 790.00 790.00 347.00 173.60

22-26 - Ditto - without cable & conduit 349.00 349.00 349.00 349.00 186.90 93.50

22-27 - Ditto - but cables only 592.00 605.00 592.00 605.00 213.62 106.80
22-28 Add to each additional ckt
controlled by more than one 981.00 985.00 447.00 452.00 176.22 88.10
switch / push

22-29 - Ditto - without cable 794.00 794.00 261.00 261.00 114.50 57.30

22-30 - Ditto - without cable & conduit 115.17 115.17 115.17 115.17 61.70 30.90

22-31 - Ditto - but cables only 195.00 200.00 195.00 200.00 70.50 35.30

22-32 One light, fan, bell controlled by

two, two way switch complete
with all consumables switch board
final sub ckt etc using pvc non- 4755.00 4778.00 2169.60 2190.00 854.00 427.00
sheathed 1.3/1.5 rm (3/.029)
single core cable

22-33 - Ditto - but without cables. 3851.00 3851.00 1264.00 1264.00 555.00 278.00
22-34 - Ditto - without cables & 558.40 558.40 558.40 558.40 299.00 149.60
conduit.

22-35 - Ditto - but cables only 947.00 968.00 947.00 968.00 342.00 170.90
22-36 Add to each additional ckt
controlled by more than one
1569.00 1577.00 716.00 723.00 282.00 140.90
switch/push

22-37 - Ditto - but without cables. 1271.00 1271.00 417.00 417.00 183.20 91.70
22-38 - Ditto - but without cables &
conduit. 184.00 184.00 184.00 184.00 98.70 49.40

416
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

22-39 - Ditto - but cables only 313.00 319.00 313.00 319.00 112.86 56.40

417
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

Wiring (Concealed conduit) Materials & labour

PVC
Steel conduit
Steel conduit conduit PVC conduit Fixing Add to
with
with gde "D" ("D") with only fixed in r/r
consumable
Per point consumable with consumable
using cable
using cable consumabl using cable other
other than
Eastern e using than Eastern
Eastern
cable
22-40 One three pin socket out let 5
Amps controlled by one switch
with all consumables using pvc
non-sheathed 1.3/1.5 rm (3/.029) 1171.00 1175.00 633.00 638.00 200.30 100.10
single core cable (from switch
board & light circuit)

22-41 - Ditto - without cables. 975.00 975.00 437.00 437.00 130.20 65.10
22-42 - Ditto - without conduit cables
& earth conductor. 124.00 124.00 124.00 124.00 70.00 35.00

22-43 - Ditto - but cables only 206.00 211.00 206.00 211.00 80.10 40.00

22-44 - Ditto - but direct from DB / 3269.00 3285.00 1492.00 1506.00 587.00 294.00
SDB

22-45 - Ditto - but without cables. 2648.00 2648.00 869.00 869.00 382.00 191.00

22-46 - Ditto - without conduit cables

& earth conductor. 383.90 383.90 383.90 383.90 205.60 102.90

22-47 - Ditto - but cables only 651.00 666.00 651.00 666.00 235.00 117.50

22-48 One three pin socket out let 15

Amps controlled by one switch
with all consumables using pvc
non-sheathed 2.5 rm (7/.029) 3716.00 3716.00 2073.00 2073.00 587.00 294.00
single core cable (direct from
SDB/DB)

22-49 - Ditto - without cables. 2653.00 2653.00 1009.00 1009.00 382.00 191.00

22-50 - Ditto - without conduit cables

& earth conductor. 314.00 314.00 314.00 314.00 206.00 103.00

22-51 - Ditto - but cables only 1093.00 1093.00 1093.00 1093.00 235.00 117.50

418
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka
Wiring (Surface conduit) Materials & labour
PVC
Steel conduit conduit
Steel conduit
with (gde D) PVC conduit (D) Fixing Add to
with
consumable with with consumable only fixed in r/r
Per point consumable
using cable consumabl using cable other
using cable
other than e using than Eastern
Eastern
Eastern cable
Eastern
22-52 One light, fan, bell controlled by
one switch complete with pvc non-
sheathed single core cable 1.3/1.5
rm (3/.029) including switch 2805.00 2805.00 1189.00 1189.00 320.00 160.00
board final sub ckt conduit heavy
gauze & nec. consumables

22-53 - Ditto - without cables. 2315.00 2315.00 698.00 698.00 208.00 104.00

22-54 - Ditto - without conduit and

cables 295.00 295.00 295.00 295.00 112.00 56.00

22-55 Add to each additional ckt

controlled more than one
926.00 934.00 396.00 396.00 106.60 53.30
switch/push

22-56 - Ditto - but without cables. 764.00 771.00 232.00 232.00 69.30 34.60
22-57 - Ditto - but without conduit &
cables. 97.40 98.20 98.20 98.20 37.30 18.60

22-58 One light, fan, bell controlled by

two, two way switch complete
with all consumables, switch
board final sub ckt etc using pvc 4488.00 4488.00 1902.00 1902.00 512.00 256.00
non-sheathed 1.3/1.5 rm (3/.029)
single core cables

22-59 - Ditto - but without cables. 3704.00 3704.00 1117.00 1117.00 333.00 166.40

22-60 - Ditto - but without cables &

conduit. 472.00 472.00 472.00 472.00 179.20 89.60

22-61 Add to each additional ckt

controlled by more than one
1481.00 1481.00 628.00 628.00 169.00 84.50
switch / push

22-62 - Ditto - but without cables. 1222.00 1222.00 369.00 369.00 109.90 54.90
22-63 - Ditto - but without conduit &
cables. 155.80 155.80 155.80 155.80 59.10 29.60

419
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

Wiring (Surface conduit) Materials & labour

PVC
Steel conduit conduit
Steel conduit
with (gde "D") PVC conduit (D) Fixing Add to
with
consumable with with consumable only fixed in r/r
Per point consumable
using cable consumabl using cable other
using cable
other than e using than Eastern
Eastern
Eastern cable
Eastern
22-64 One three pin socket out let 5
Amps controlled by one
switch with all consumables
using pvc non-sheathed 1.3/
1.5 rm (3/.029) single core 1143.00 1143.00 608.00 608.00 160.00 80.00
cable (from switch board &
light circuit)

22-65 - Ditto - but without cables. 960.00 960.00 426.00 426.00 104.00 52.00

22-66 - Ditto - but without conduit,

cables & earth conductor. 117.00 117.00 117.00 117.00 56.00 28.00

22-67 - Ditto - but direct from

DB/SDB 2971.80 2971.80 ###### 1581.00 416.00 208.00

22-68 - Ditto - but without cables. 2496.00 2496.00 ###### 1108.00 270.00 135.20

22-69 - Ditto - but without conduit

cables & earth conductor.
304.00 304.00 304.00 304.00 145.60 72.80

22-70 One three pin socket out let 15

Amps controlled by one
switch with all consumables
using pvc non-sheathed 3317.00 3349.00 ###### 1704.00 160.00 80.00
2.5rm(7/.029) single core cable
(direct from SDB/DB)

22-71 - Ditto - without cable 2407.00 2407.00 761.00 761.00 104.00 52.00

22-72 - Ditto - without conduit cable

& earth conductor.
178.00 178.00 178.00 178.00 56.00 28.00

420
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

Rate in Taka

Wiring (Surface conduit) flame proof Materials & labour

Steel
conduit
solid Steel conduit
drawn solid drawn with Fixing Add if fixed
with necessary only in r/r
Per point
necessary consumables
consumabl using approved
es using other cables
cable
Eastern
22-73 One light, fan, bell controlled by one switch with non-
sheathed single core cable 1.3/1.5 rm (3/.029)
including switch board final sub ckt conduit heavy ###### 3121.00 320.00 160.00
gauze & nec. consumables

22-74 - Ditto - without cables. ###### 2584.00 208.00 104.00

22-75 - Ditto - without cables & conduit. 295.00 295.00 112.00 56.00

22-76 Add to each additional ckt controlled by more than ###### 1030.00 105.60 52.80
one switch / push

22-77 - Ditto - without cables. 853.00 853.00 68.60 34.30

22-78 - Ditto - without conduit & cables. 97.40 97.40 37.00 18.50

22-79 One three pin socket out let 5 Amps controlled by one
switch with all consumables using pvc non-sheathed
1.3/1.5 rm (3/.029) single core cable (direct from ###### 3433.00 352.00 176.00
SDB/DB)

22-80 - Ditto - without cables. ###### 2842.40 228.80 114.40

22-81 - Ditto - conduit cables & earth conductor. 324.50 324.50 123.20 61.60
EARTH CONDUCTOR Rate in Taka
Materials & Fixing Add if fixed
Per Point
Labour only in r/r
22-82 Earth conductor for socket point with 14 SWG copper
conductor for direct from DB / SDB 330.80 34.40 17.20

22-83 - Ditto - but 16 SWG copper conductor 214.00 34.40 17.20

22-84 - Ditto - but insulated earthing cables BYA / FR 1x 1.5 re (1-
w) for Socket point direct from DB / SDB 405.00 34.40 17.20

Per Metre
421
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-85 Supply and fixingixing of insulated earthing cable BYA / FR 37.10 3.40 1.70
1x 1.5 rm (7-W)

22-86 - Ditto - but 1x 2.5 re (1-W) 46.20 3.70 1.90

22-87 - Ditto - but 1x 2.5 rm (7-W) 46.20 3.90 2.00

422
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

BATTENING (WOOD) Rate in Taka

Materials & Fixing Add if fixed

Per Metre
Labour only in r/r

22-88 Wooden battening (Teak) complete with necessary specified

consumable i.e link clips/tacks, screw nails etc for 12mm x 12
42.00 17.00 9.00
mm

22-89 - Ditto - 20 mm x 12 mm 50.00 17.20 8.60

22-90 - Ditto - 25mm x 12mm 66.10 23.00 11.50

Rate in Taka

CONDUIT LAYING (Surface) Materials & Labour

Fixing Add if fixed
only in r/r
Per Metre Steel PVC (gde-D)

22-91 Conduit laying placing with necessary fittings &

consumables i.e. saddle fish wire etc having diameter
- 60.10 33.70 16.80
of 16 mm

22-92 - Ditto - but 20 mm 305.00 68.60 33.70 16.80

22-93 - Ditto - but 25 mm 435.00 82.80 33.70 16.80

22-94 - Ditto - but 30 mm - 146.00 33.70 16.80

22-95 - Ditto - but 40 mm - 211.00 42.50 21.00

22-96 - Ditto - but 50 mm - 307.00 74.10 37.10

CONDUIT LAYING (Concealed)

Per Metre
22-97 Conduit laying placing with necessary fittings &
consumables i.e. saddle fish wire etc having diameter
of 16 mm - 89.80 63.40 31.70

22-98 - Ditto - but 20 mm 335.00 98.30 63.40 31.70

22-99 - Ditto - but 25 mm 450.00 98.40 49.40 24.70

22-100 - Ditto - but 30 mm - 166.00 63.40 31.70

423
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

22-101 - Ditto - but 40 mm - 244.00 76.10 38.00

22-102 - Ditto - but 50 mm - 272.00 95.10 47.50

424
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

Rate in Taka

Materials & Fixing Add if fixed

CONDUIT LAYING (Flame proof) SOLID DRAWN
Labour only in r/r

Per Metre
22-103 Conduit laying placing with necessary fittings & consumables
i.e. saddle fish wire etc having diameter of 20 mm 445.00 63.40 31.70

22-104 - Ditto - but 25 mm 502.00 63.40 31.70

Each. Materials & Labour Fixing Add if fixed

only in r/r
Steel PVC
22-105 Conduit elbow / bend / Tee / coupler Adopter etc up to
20 mm dia. 19.80 10.20 1.80 0.90

22-106 - Ditto - but over 20 mm dia Each

33.00 15.00 3.00 1.50
Each
22-107 Junction box steel sheet 75 mm deep rectangular with
plastic/Ebonite cover of 100x100 mm. 63.80 - 23.00 11.50

22-108 - Ditto - but 150x100mm 79.20 - 25.00 12.50

22-109 - Ditto - but 200x150 mm 115.50 - 27.50 13.80

22-110 - Ditto - but 250x200 mm 132.10 - 30.60 15.30

Materials & Labour

Sheathed
Non- Non-sheathed
Sheathed other Fixing Add to
sheathed other using
CABLE / WIRE DRAWING Eastern using Only fixed in r/r
Eastern approved
Cables approved
Cables cables
cables

Per Metre
22-111 Drawing PVC cable in prelaid /
fixed / conduit / batten of
single core 1.5rm (3/.029) 47.20 40.00 47.50 42.00 14.00 7.00

22-112 - Ditto - 1.5 rm (3/.036) 47.00 40.00 47.00 42.00 13.80 7.00

22-113 - Ditto - but 2.50 rm (7/.029) 65.00 57.00 67.10 57.80 13.80 7.00

22-114 - Ditto - but 4 rm (7/.036) 92.10 81.20 94.70 82.00 13.80 6.90

22-115 - Ditto - but 6 rm (7/.044) 128.00 115.00 132.00 116.40 13.80 6.90

425
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

22-116 - Ditto - but 16 rm (7/.064) 303.00 277.00 318.00 290.00 17.20 8.60

426
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
ADDITIONAL CORE Materials & Labour

Sheathed
Non- Non-sheathed Fixing Add to
Sheathed other
sheathed other using Only fixed in r/r
Per Metre Eastern using
Eastern approved
Cables approved
Cables cables
cables

22-117 Additional single core cable in

prelaid batten / conduit with
main cable of 1.5rm (3/.029) 39.30 32.60 39.70 33.90 6.90 3.40

22-118 - Ditto - but 1.5 rm (3/.036) 39.00 32.60 39.70 33.90 7.00 3.00

22-119 - Ditto - 2.5rm (7/.029) 56.90 48.40 58.70 49.50 6.90 3.40

22-120 - Ditto - 4rm (7/.036) 83.20 72.30 85.90 73.20 6.90 3.40

22-121 - Ditto - 6rm (7/.044) 118.00 105.10 121.80 106.50 6.90 3.40

22-122 - Ditto - 16rm (7/.064) 292.00 265.60 302.00 274.00 8.60 4.30

Cable other than above sizes-Rate is to be taken from section 21 & section 29
RUNNING EARTH CONDUCTOR Rate in Taka

Materials & Fixing Add if fixed

Per Metre
Labour only in r/r

22-123 Copper earth conductor 16 SWG./1.610mm 25.00 4.60 2.30

22-124 - Ditto - but 14 SWG / 2.012 mm 38.10 4.60 2.30

22-125 - Ditto - but 12 SWG / 2.610 mm 50.20 4.60 2.30

LAMP HOLDER / PENDENT
Each
22-126 Pendent ordinary comprising ceiling rose, lamp holder bakelite
BC, CG with shade carrier ring 23/.0076 flexible cord (Twin
plastic) up to 1.5m in length. 165.00 27.70 13.80

22-127 - Ditto - but without lamp holder 113.50 18.00 9.00

22-128 Pendent stiff comprising galvanised back plate 20 mm heavy
gauze steel conduit upto 9m in length with brass adopter &
bakelite lamp holder complete with accessories 395.90 51.90 26.00

22-129 Pendent rise & fall comprising ceiling rose, lamp holder
bakelite BC, CG with shade carrier ring counter weight
complete with pulley cord guide lead shot, ceiling rose 271.00 43.70 21.90
23/.0076 flexible cord upto 3m

427
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-130 Lamp holder batten BC with shade carrier ring 16mm all
66.90 14.00 7.00
insulated.
22-131 - Ditto - but 450 degree angle 72.60 14.00 7.00

22-132 - Ditto - BC, CG (pendent holder) 69.20 15.30 7.70

428
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

LAMP HOLDER/PENDENT Rate in Taka

Materials & Fixing Add if fixed

Each
Labour only in r/r

22-133 - Ditto - threaded (brass) 63.20 15.30 7.70

22-134 - Ditto - for brass bracket 93.20 15.30 7.70

WALL BRACKET
Each
22-135 Brass Bracket plain 300 mm swan neck with brass /
bakelite lamp holder with shade carrier ring complete in
190.00 46.40 23.20
all respect (with out bulb)

Rate in Taka
Materials & Labour
Fixing Add to
only fixed in r/r
Crescent Gloria

22-136 Fancy type wall bracket wall Crescent cat no. CB-373-NS
(without bulb) GWB-1201-1884 CH 347.00 635.00 55.60 27.80

22-137 - Ditto - Crescent cat no. CB-931-684 895.00 - 55.60 27.80

22-138 - Ditto - but Crescent cat no. CB-373-HR-CH / Gloria cat
No. GWB 1201-1821-CR.B-130 H-170 703.00 358.00 56.30 28.20

22-139 - Ditto - Crescent / Gloria cat no. CB-565-970 / GWB- 1018.00 1164.00 64.70 32.30
1501-2297-FR
22-140 - Ditto - Crescent / Gloria cat no. CB-651-666 / GWB- 981.00 1099.00 64.70 32.30
2683-1888
22-141 - Ditto - Crescent cat no. CB-604-540-BF(4B), Gloria cat
no GWB-2684-1888 1544.00 1789.00 70.30 35.20

22-142 - Ditto - Crescent cat no. CB-221-678-3B 681.00 - 70.30 35.00

22-143 - Ditto - Crescent cat no. CB-952-CPG-02 / Gloria cat no-
GWB-2690-651-NC 1227.00 1261.00 70.30 35.00

22-144 - Ditto - Crescent cat no. CB-929-CPG-2 / Gloria cat no.

GWB-2689-651-NC. 873.00 1208.00 70.30 35.00

22-145 - Ditto - Crescent cat no. CB-911-977 / Gloria cat no

GWB-1793-2147-FR 1633.00 1672.00 70.30 35.00

22-146 - Ditto - Crescent cat no. CB-518 crystal / Gloria cat no

GWB-1521-Crystal 8403.00 10373.00 70.30 35.20

22-147 - Ditto - Crescent cat no. CB-331-684 / Gloria cat No.

GWB-1478-2298-pata. 843.00 2416.00 70.00 35.00

22-148 - Ditto - Crescent cat no. CB-897-694 / Gloria cat no

GWB-2731-1839 2386.00 814.00 70.00 35.00

429
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-149 - Ditto - Crescent cat no. CB-986 crystal / Gloria cat no
GWB-1776-Crystal 6220.00 7573.00 79.90 39.90

22-150 - Ditto - Crescent cat no. CB: 431-592 (frosted)/Gloria cat

no GWB 1501-2105 Tinted 976.00 1170.00 69.96 35.00

22-151 - Ditto - Crescent cat no. CB-895 (1) - 996-C/F 1653.00 - 71.70 36.00

430
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka

WALL BRACKET Materials & Labour

Fixing Add to
Each Crescent Gloria only fixed in r/r

22-152 - Ditto - Crescent cat no. CB: 332-684 / Gloria cat no.
GWB 1502-2101 frosted 1337.00 1561.00 71.70 35.80

22-153 - Ditto - Crescent cat no. CB-892 (1) - 972 - D / Gloria

cat no. GBB-979-2401T 1676.00 1928.00 69.80 34.90

22-154 - Ditto - Crescent cat no. CB: 447 Gold-644 Amber F

(bath room) / Gloria cat no. GBB 958-1205 T 1064.00 1266.00 69.80 34.90

22-155 - Ditto - Crescent cat no. CB-981-CG-crystal 1884.00 - 69.80 34.90

22-156 - Ditto - Crescent cat no. CB-412-BL-T 12"D / Gloria
model no GBB-970-2127-FR. ###### 1940.00 69.80 34.90

22-157 - Ditto - Crescent cat no. CB-652-666

###### - 69.80 34.90
22-158 - Ditto - Crescent cat no. CB-792 (1) 92 DF
###### - 69.80 35.00
22-159 - Ditto - but Crescent cat no. CB-899-977 F/C
###### - 69.80 35.00
22-160 - Ditto - Crescent cat no. CBB-4/12-BL T-12"DD 1558.00 - 68.90 34.00
22-161 - Ditto - Crescent cat no. CB: 602-909 FF./ Gloria Model
no. GWB-1595-2407-FR 1103.00 1183.00 69.90 34.90

22-162 - Ditto - Crescent cat no. CB-740 / Gloria Model no.

GWB-1787 933.00 1179.00 69.90 34.90

22-163 - Ditto - Gloria Model no GWB-2628-1809

- 1123.00 68.90 34.40

22-164 - Ditto - Crescent cat no. CB-577-662 711.00 - 68.90 34.00

22-165 - Ditto - Crescent cat no. CB-577 (ii) - 662 1343.00 - 70.40 35.00
22-166 - Ditto - Crescent cat no. CB-498-540-4B 797.00 70.40 35.20
-
22-167 - Ditto - Crescent cat no. CB-337-551/Gloria cat no. GWB-
1215-1816 998.00 937.00 69.80 34.90

22-168 - Ditto - Gloria cat no. GWB-1589-2151 T. - 1386.00 69.80 35.00

22-169 - Ditto - Crescent cat no. CB-675-642-A2 / Gloria Model
no GWB-1741-2291 SR 1999.00 2354.00 70.70 35.40

22-170 - Ditto - Crescent cat no. CB-894-977 / Gloria model no

GWB-1754-2294 BND 1817.00 2238.00 70.70 35.40

22-171 - Ditto - Crescent cat no. CB-591-681-542 2062.00 - 70.70 35.00

22-172 - Ditto - Crescent cat no. CB-560-681-547 1009.00 - 70.20 35.00

22-173 - Ditto - Crescent cat no. CB-331-678-4B/ Gloria cat no.
GWB 1217-1807-BR. 718.00 613.00 70.20 35.10

431
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-174 - Ditto - Crescent cat no. CB-751 (1) 676 699.00 - 70.20 35.00
- Ditto - Crescent cat no CB-610-668 CHGloria model no
22-175 1587.00 2007.00 70.30 35.00
GWB-2592-1892
22-176 - Ditto - Gloria model no GWB-2672-1897 - 1200.00 70.30 35.00

432
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka
WALL BRACKET Materials & Labour Fixing Add to
Each Gloria Swash only fixed in r/r
22-177 - Ditto - but fancy type wall bracket Gloria cat no. GWB-
1667-2256 BND 1579.00 - 70.30 35.20

22-178 - Ditto - Gloria cat no. GWB 1347-658 1347.00 - 70.30 35.00
22-179 - Ditto - Gloria cat no. GWB 1348-1843
2253.00 - 70.30 35.20

22-180 - Ditto - Gloria cat no. GWB 1207-1809-DS. 982.00 - 70.30 35.20

22-181 - Ditto - Gloria cat no. GWB 1501-2286-FR.

1184.00 - 70.30 35.20

22-182 - Ditto - Gloria cat no. GWB 1334-1817 1729.00 - 70.30 35.20

22-183 - Ditto - Gloria model no GWB-1333-1817

1000.00 - 70.30 35.20

- Ditto - Gloria model no GWB-1511-2114/1828

22-184 1337.00 - 70.30 35.20

22-185 - Ditto - Gloria cat no. GWB 1201-1821 CR/Swash cat

no. SCS -76 HRBR 356.00 506.00 70.30 35.20

22-186 - Ditto - Gloria cat no. GWB 2543-1823 ##### - 70.30 35.20

22-187 - Ditto - Gloria cat no. GWB 1671-2255

883.00 - 70.30 35.20

22-188 - Ditto - Gloria cat no. GWB 1663-2255 .

1146.00 - 70.30 35.20

22-189 - Ditto - Gloria cat no. GWB-1203-1804 634.00 - 70.30 35.20

22-190 - Ditto - Gloria cat no. GWB-1475-2129 FR

3160.00 - 70.30 35.20

22-191 - Ditto - Gloria cat no. GWB-1662-2250 BND

2281.00 - 70.30 35.20

433
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka

WALL BRACKET Materials & Labour

Fixing Add to
only fixed in r/r
Each Gloria Swash

22-192 - Ditto - Swash cat no. SCDB-161 DT 732 - 2129.00 70.30 35.20

22-193 - Ditto - Swash cat no. SCSB-220-DT-743

- 1243.00 70.30 35.20

22-194 - Ditto - Gloria cat no. GCF-380 (B) DIA 178

1000.00 - 70.30 35.20

22-195 - Ditto - Gloria cat no. GWB-1299-1839

883.00 - 70.30 35.20
22-196 - Ditto - Gloria model no GWB-1501- TV Glass
1149.00 - 70.30 35.20

22-197 - Ditto - but Gloria model no GWB-1218-1807 DS FR 1077.00 - 70.30 35.20

22-198 - Ditto - Gloria cat no. GWB-1665-2251 BND

1722.00 - 70.30 35.20

22-199 - Ditto - Gloria cat no. GWB-1476-2129 1618.00 - 70.30 35.20

22-200 - Ditto - Gloria cat no. GWB-1203-3604 B-130 H-210 P-

140 640.00 - 70.30 35.20

22-201 - Ditto - Gloria cat no. GWB-1588-2148 crystal l

6638.00 - 70.30 35.20

22-202 - Ditto - Gloria cat no. GWB-1587-2148 crystal

3667.00 - 70.30 35.20

22-203 - Ditto - Gloria cat no. GWB-1661-2250 BND

1210.00 - 70.30 35.20

22-204 - Ditto - Gloria model no GBB-961-2127 FR L-305 B-105

P-750 / Swash cat no. SCB 33 (12") PL B-72 L-368 P- 1712.00 1002.00 70.30 35.20
110.
22-205 - Ditto - Gloria model no GBB-953-1803 D Cut 1058.00 - 70.30 35.20
22-206 - Ditto - Gloria cat no. GBB-959-2105 T / Swash cat no.
SCB-35 TTG 12" B-115 L-410 P-112 1402.00 1453.00 70.30 35.20

22-207 - Ditto - Gloria cat no. GWB- 1261-1807 DS BR / Swash

cat no. SCB-37 TTG B-120 L-318 P-91 1101.00 2053.00 70.30 35.20

22-208 - Ditto - Gloria model no GWB-1753-2293 BND

1911.00 - 70.30 35.20

434
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-209 - Ditto - Gloria model no GWB-1607-2105
1386.00 - 70.30 35.20

22-210 - Ditto - Swash cat no. SCS -112 (B) G 8" NC. - 903.00 70.30 35.20

435
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
WALL BRACKET Materials & Labour Fixing Add to
Each Gloria Swash only fixed in r/r
22-211 - Ditto - Swash cat no. SCB -35 TTG 6" L-255 B-105 P-
92 - 1203.00 70.30 35.20

22-212 - Ditto - Gloria cat no. GEPL-714./ Swash cat no. BFWT-
6 SMAL D-230 L-281 8619.00 1,791.00 70.30 35.20

22-213 - Ditto - Gloria GWT-708 / Swash cat no. BFWT-6 BIG

B-308 L-385 1342.00 1810.00 70.30 35.20

22-214 - Ditto - Gloria cat no. GWT-706

1392.00 - 70.30 35.20

22-215 - Ditto - Gloria model no , GWB-2628-1809

1092.00 - 70.30 35.20

22-216 - Ditto - Gloria model no GWB-2543-1814

797.00 - 70.30 35.20

22-217 - Ditto - Gloria cat no. GWB-1205-1809.

579.00 - 70.30 35.20

22-218 - Ditto - Gloria model no GWT-711 (Brass net)

1966.00 - 70.30 35.20

22-219 - Ditto - Swash cat no. BFWT-1 B-170 H-108 675.00 70.30 35.20
-

22-220 - Ditto - Gloria model no GWT-701Alu cast body L-166

B-125 H-105 521.00 - 70.30 35.20

22-221 - Ditto - Swash cat no. BFWT-4 PARSPEX B-119, H-

235, P-110 - 1159.00 70.30 35.20

Materials & Add if fixed

Fixing only
Labour in r/r
22-222 Shade Enamelled / Aluminium Conical 250 mm dia 80 mm deep 25
to 28 mm holes complete with spd painting 56.90 13.80 6.90

22-223 - Ditto - 300 mm dia 100 mm deep 61.70 13.80 6.90

22-224 Shade decorative white glass bowl / opal type 45 mm hole with brass
chain upto 50mm length complete with gallery as required 357.00 45.90 23.00

22-225 - Ditto - without chain & gly 312.00 30.60 15.00

22-226 Glass for water tight bracket 75.00 15.30 7.70

22-227 Glove white glass opal type 150mm 93.00 15.30 7.70

436
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Materials & Labour
Fixing Add to fixed
Saucer light Crescent Gloria only in r/r

Each
22-228 Ceiling light fitting complete as per Gloria model no. GCF- - 372.00 70.30 35.20
602

22-229 - Ditto - but Crescent cat no. CP-8-F / Gloria GCF-624 654.00 512.00 70.30 35.20
DIA-215 H-70

22-230 - Ditto - but Crescent cat no. CP-8-R 677.00 - 70.30 35.20

22-231 - Ditto - but Crescent cat no. CP-25 / Gloria GCF-640 736.00 1267.00 70.30 35.20

22-232 - Ditto - but Crescent cat no. CP-22 / Gloria GCF-661 710.00 1266.00 70.30 35.20

22-233 - Ditto - but Crescent cat no. CP-17 DD-Ring 953.00 - 70.30 35.20

22-234 - Ditto - but Crescent cat no. CP-17 design with ring / 1329.00 1259.00 70.30 35.20
Gloria Model no GCF-630-DIA-313 H-126

22-235 - Ditto - but Crescent cat no. CP-19 / Gloria GCF-707 AB 823.00 1408.00 70.30 35.20

22-236 - Ditto - but Crescent cat no. CMP-45 D-425 H-230 (with 4909.00 - 70.30 35.20
Tube)

Rate in Taka

Saucer light Materials & Labour Fixing Add to fixed

only in r/r
Each Gloria Swash
22-237 Saucer light fittings as per Gloria cat no. GCF-463 D 130 L- 847.00 1217.00 70.30 35.20
120 H-70 / Swash cat no. SCPF-7 (without bulb)

22-238 - Ditto - Gloria cat no. GCF-378(B) / Swash cat no. 1324.00 1419.00 70.30 35.20
SCCSL-6(B) Brass DIA -150 H-153

22-239 - Ditto - Gloria cat no. GCF-611 DIA-223 H-92 / Swash 505.00 973.00 70.30 35.20
cat no. SCCF-22 DIA-222 H-91

22-240 - Ditto - Gloria cat no. GCF-610 DIA-223 H-92/ Swash cat 506.00 838.00 70.30 35.20
no. SCCF-28 DESIGN GLASS DIA - 222 H-97

22-241 - Ditto - Swash cat no. SCCSL-2 - 1399.00 70.30 35.20

22-242 - Ditto - Gloria cat no. GCF-609(B) / Swash cat no. SCCF- 483.00 1046.00 70.30 35.20
30

22-243 - Ditto - Gloria cat no. GCF-410-658 / Swash cat no. 743.00 694.00 70.30 35.20
SCCF-35 DIA-157 H-173

437
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-244 - Ditto - Gloria cat no. GCF-623-DS / BR DIA P-218 H-70 512.00 1202.00 70.30 35.20
Swash cat no. SCCF-8-Side cut Dia-255 H-82

22-245 - Ditto - Gloria cat no. GWT-713 1186.00 - 70.30 35.20

22-246 - Ditto - Gloria cat no GCF-605 DIA-201 H-207 / Swash 1426.00 1232.00 70.30 35.20
cat no. SCPF-4/84

438
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

SPOT LIGHT Materials & Labour Fixing Add to

only fixed in r/r
Each Crescent Gloria
22-247 Spot-Light fittings as per Crescent cat no. CML-369 with
CFL 23-25 watt lamp. 1051.00 - 70.30 35.20

22-248 - Ditto - Crescent cat no. CML-386 950.00 - 70.30 35.20

22-249 - Ditto - Crescent cat no. CML-190 B--95 L-130 P-115 T 934.00 - 70.30 35.20

22-250 - Ditto - Crescent cat no. CML-159(2) 1626.00 - 70.30 35.20

22-251 - Ditto - Crescent cat no. CML-135 with PAR-38 bulb 1966.00 - 70.30 35.20

22-252 - Ditto - Crescent cat no. CML-58, D-150, H-110 1317.00 - 70.30 35.20
22-253 - Ditto - Crescent cat no. CP-10 DS / Gloria cat no. GSL-
384 928.00 845.00 70.30 35.20

-
22-253A - Ditto - Crescent cat no. CML-26 1670.00 70.30 35.20
-
22-253B - Ditto - Crescent cat no. CML-339 (Explosive proof) 5782.00 70.30 35.20
SPOT LIGHT Materials & Labour
Fixing Add to
Each Swash Gloria only fixed in r/r

22-254 Spot light fittings as per swash cat no. SCSL-21 / Gloria 825.00 857.00 70.30 35.20
model no GSL-364

22-255 - Ditto - Swash cat no. SCSL-9 / Gloria model no GCF- 1289.00 632.00 70.30 35.20
627

22-256 - Ditto - swash cat no. SCSL-20 (B) / Gloria cat no. GSL- 828.00 861.00 70.30 35.20
396.

22-257 - Ditto - swash cat no. SCSL-29(2) / Gloria cat no. GSL- 2030.00 1334.00 70.30 35.20
397(2)

439
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

CHANDELIER LIGHT Materials & Labour Fixing Add to

only fixed in r/r
Each Gloria Crescent
22-258 Chandelier light fitting Complete with all fittings as per
Crescent cat no. CR - 367 (4) CY (except bulb) 0.00 24463.00 107.80 54.00

22-259 - Ditto - Crescent cat no. CR-310 (i) Dgn. CY / Gloria

model no GCF-3108 (3)-2151 T ###### 14704.00 107.80 53.90

22-260 - Ditto Gloria model no GCF-3110 (9) - 2260 / Crescent

cat no. CR-244 (9)-022/CY 20239.00 22955.00 107.80 53.90

22-261 - Ditto - Crescent cat no. CR-386 (1) - 7789.00 107.80 53.90

22-262 - Ditto - Crescent cat no.CB-170(21) crystal - 250406.00 359.00 179.60

22-263 - Ditto - Crescent cat no. CR-170(8) crystal. - 53417.00 107.80 53.90

22-264 - Ditto - Crescent cat no. CB-239 (7) 925 clear design - 18531.00 107.80 53.90
22-265 - Ditto - Gloria model no GCF-3109 (3) - 2415 Crescent
cat no. CR-230-919-AMBER ###### 12166.00 107.80 53.90

Chandelier Light Materials & Labour Fixing Add to

Each Swash Gloria only fixed in r/r
22-266 Chandelier light fittings as per Gloria cat no. GCF/-1086
(16) crystal (except bulb) - 116509.00 359.00 179.60

22-267 - Ditto - Swash cat no. SCDB-156 crystall. 14958.00 - 107.80 54.00

22-268 - Ditto - Gloria cat no. GCF-1197 (18) - 2404 - 34949.00 107.80 54.00

22-269 - Ditto - Swash cat no. SCDB-155 crystall. 7419.00 - 107.80 54.00
22-270 - Ditto - Swash cat no. SCH-183 (8) crystal / Gloria cat no.
GCF/-1084 (8) crystal. 48592.00 36749.00 359.00 180.00

22-271 - Ditto - Gloria cat no. GCF-1196 (11) -2278 Crystal. - 27458.00 359.00 180.00

22-272 - Ditto - Swash cat no. SCDB-388 crystall. 13358.00 - 107.80 53.90

22-273 - Ditto - Swash cat no. SCDB-447 (F) pata. 2050.00 - 107.80 53.90

TUBE LIGHT FIXTURES / FITTINGS Materials & Labour Fixing Add to

only fixed in r/r
Each 1220 mm 610 mm
22-274 Tube light fixture (Double) complete with fluorescent tube,
choke, starter, holder, flexible cord etc CATA brand ###### - 107.80 54.00
(China / Taiwan) 2x40 watt..
22-275 - Ditto - but single fixture 1x40 watt 868.00 - 80.80 40.00
22-276 - Ditto - but single tube electronics fixture fixed on PVC
batten local made, brand MEP, model no B-231.1x40 watt. 569.00 - 80.80 40.00

440
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-277 Reflector trough type with open top stove enamelled
ordinary type, white colour complete with all fittings i.e.
choke, starter, holder, flexible cord / wire etc suitable for 863.00 726.00 57.60 29.00
1220 mm 40 watt & 610 mm with tube (Eastern)

22-278 Fluorescent tube local made (Eastern) 159.00 135.00 27.50 14.00

441
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

TUBE LIGHT FIXTURES / FITTINGS Materials & Labour

Fixing Add to
only fixed in r/r
Each Crescent Gloria

22-279 Tube light fixture complete with fluorescent tube choke

starter holder flexible cord etc as per Crescent cat no. CTLS
94x1x40 watt Gloria model no GTF-863x1x40 watt.. 2267.00 2383.00 234.00 117.00

22-280 - Ditto - Crescent cat no. CTLS- 96x4x20 watt / Gloria

model no GTF-815x4x20 watt. 4853.00 8046.00 350.00 175.20

22-281 - Ditto - Crescent cat no. CTLS-11x1x40 watt (design)/

Gloria cat no. GTF-755x1x40 watt design 1977.00 1921.00 234.00 117.00

22-282 - Ditto - Crescent cat no. CTLS 4x2x40 watt/Gloria cat no.
GTF-812x2x40 watt 3858.00 4198.00 284.00 142.00

22-283 - Ditto - Crescent cat no. CTLS 11x1x20 watt/(design)

Gloria cat no. GTF-753x1x20 watt 2455.00 1442.00 234.00 116.80

22-284 - Ditto - Crescent cat no. CTLS-160x1x40 watt 4099.00 - 234.00 117.00

22-285 - Ditto - Crescent cat no. CTLS-11x1x10 watt (design) 1352.00 - 234.00 117.00
22-286 - Ditto - Crescent cat no. CTLS-1x1x40 watt Gloria cat
1977.00 1874.00 234.00 116.80
no. 753x4x40 watt
22-287 - Ditto - Crescent cat no. CTLS 68x2x40 watt / Gloria cat
no. GTF-756x2x40 watt. 3099.00 2982.00 234.00 116.80

22-288 - Ditto - Crescent cat no. CTLS-31x4x20 watt/Gloria cat

no. GTF-793x4x20 watt. 5972.00 5435.00 350.00 175.20

22-289 - Ditto - Crescent cat no. CTLS-22x4x20 watt/Gloria cat

no. GTF-771x4x20 watt. 5972.00 5435.00 350.00 175.20

TUBE LIGHT FIXTURES / FITTINGS Materials & Labour Fixing Add to

Each Swash Gloria only fixed in r/r
22-290 - Ditto - but as per Swash cat no. SCTF74/79 x1x20 watt /
Gloria model no. GTF-815x1x20 watt. 2032.00 1814.00 350.00 175.20

22-291 - Ditto - Swash cat no. SCTF 11/78x1x20 watt. 1951.00 - 234.00 117.00

22-292 - Ditto - Swash cat no. SCTF 34x1x20 watt. 2169.00 - 234.00 117.00

22-293 - Ditto - Swash cat no. SCTF 34x1x40 watt. 2396.00 - 234.00 117.00
22-294 - Ditto - Swash cat no. SCTF 24/85x2x40 watt / Gloria cat
no. GTF 764x2x40 watt 5359.00 4631.00 234.00 117.00

22-295 - Ditto - Swash cat no. SCTF 8/78x2x40 watt/Gloria cat

no. 789x2x40 watt. 3074.00 2773.00 234.00 117.00

22-296 - Ditto - Swash cat no. SCTF 33x4x20 watt 5465.00 - 350.00 175.00

442
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

22-297 - Ditto - Swash cat no. SCTF 11x178x1x40 watt. 2111.00 - 234.00 117.00

22-298 - Ditto - Swash cat no. SCTF 37x2x40 watt. 4380.00 - 284.00 142.00

22-299 - Ditto - Swash cat no. SCRL 2x2x40 watt.Alu 4495.00 - 284.00 142.00

443
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

TUBE LIGHT FITTINGS Materials & Labour Fixing Add to

only fixed in r/r
Each 40 Watt 20 Watt
22-300 Choke coil (approved quality) 235.00 241.00 37.10 18.50

22-301 Starter for fluorescent tube 23.00 23.00 7.40 4.00

Per Pair

22-302 Tube light holder / spring type (Local) 71.60 71.60 29.60 15.00

22-303 - Ditto - but foreign made 71.60 71.60 29.60 15.00

Materials & Fixing Add to

CONTROL SWITCHES
Labour only fixed in r/r
Each
22-304 Switch sp bakelite surface type all insulated 5 Amps one way
approved quality. 47.60 21.30 11.00

22-305 - Ditto - but 15 Amps 107.50 29.60 15.00

22-306 - Ditto - but 5 Amps 2 way 72.30 35.40 17.72

22-307 - Ditto - but push action suspension type approved quality. 45.20 21.30 11.00
22-308 Switch / Bell push sp bakelite piano type all insulated 5 Amps one 46.40 21.30 11.00
way (Concealed)

22-309 - Ditto - but 15 Amps 99.10 21.30 10.60

22-310 - Ditto - but 5 Amps 2 way 100.30 21.30 11.00

22-311 Switch sp bakelite surface type flame proof all insulated 5 Amps one
way mounted in malleable cast iron 574.00 35.40 17.70

22-312 - Ditto - but 5 Amps 2 way 656.00 35.40 17.70

22-313 - Ditto - but water tight one way 257.00 35.40 17.70

22-314 - Ditto - but water tight 2 way 484.00 35.40 17.70

CONTROL SWITCHES Materials & Labour

Fixing Add to
ABB MK (Singapore)
MK / MEM Legrand only fixed in r/r
Each (Singapore / MEM
(England) brand ) (Malaysia)

22-315 Switch Gang type 5 Amps, one

way, mounted in bakelite square /
rectangular plate foreign made
- 432.00 253.00 439.00 42.50 21.30
fixed on proper size concealed
steel board as required. (1x Gang)

22-316 - Ditto - but 2xgang. 317.00 359.00 484.00 424.00 53.20 26.60

22-317 - Ditto - but 3xgang 461.00 539.00 561.00 526.00 59.10 29.50
444
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

22-318 - Ditto - but 4xgang 537.00 825.00 838.00 769.00 70.90 35.40

22-319 Bell push foreign made - 551.00 488.00 527.00 71.10 35.60

445
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

SWITCH SOCKET / PLUGS Materials & Labour

MK Fixing Add to
(Singapore) / Legrand / Local Best only fixed in r/r
Each
MEM ABB quality
(Malaysia)

22-320 Switch sp socket combined 3 pin (round /

flat) out let 5 Amps shuttered pattern
- - 181.00 49.40 24.70
surface type without plug

22-321 - Ditto - but concealed type 554.00 554.00 152.00 74.10 37.10
22-322 Switch sp socket combined 3 (round / flat)
pin 13 / 15 Amps shuttered pattern surface
- - 287.00 59.00 30.00
type without plug

22-323 - Ditto - but concealed type 964.00 745.00 224.00 74.10 37.10

22-324 Socket 3 pin 5 Amps surface type - - 71.60 29.60 15.00

22-325 - Ditto - concealed type - 0.00 71.60 29.60 15.00

22-326 - Ditto -15 Amps surface type - - 125.40 29.60 15.00

22-327 - Ditto - 15 Amps concealed type - - 117.10 15.30 7.70

22-328 Socket 2 pin 5 Amps surface type 575.00 716.00 36.90 15.30 8.00

22-329 - Ditto - concealed type 547.00 547.00 29.20 7.70 3.80

22-330 Plug 3 pin 5 Amps best quality - - 37.60 7.70 3.80

22-331 Plug 3 pin 15 Amps best quality - - 66.60 24.70 12.40

22-332 Plug 2 pin 5 Amps best quality - - 25.60 7.70 4.00

Materials & Fixing Add to

BELL ELECTRIC CALLING
Labour only fixed in r/r

Each

22-333 Bell electric bakelite AC 117.10 15.30 8.00

22-334 Bazzar electric bakelite AC 111.10 15.30 8.00

22-335 Door bell electric (Ding Dong) 266.00 32.90 16.50

22-336 Door bell electric (Musical) 308.00 32.90 16.50

446
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-337 Mechanical replacement indicator highly polished hard wood
case combined together with hinged front movement of the
improved grip device of rotary type 2 way / Electronic call 8650.00 148.20 74.10
system 3 way.

22-338 Add for additional way either mechanical replacement or

electronic call system channel. 1307.00 49.40 24.70

447
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
FAN ELECTRICS Materials & Labour

With Fixing Add to

Without only fixed in r/r
Each electronics
regulator
regulator

22-339 Ceiling fan AC 230 / 220 volts single phase 50 HZ

complete with capacitor, blade down rod canapoy
electronics regulator etc 1400 mm sweep brand GEC ###### 4445.00 148.20 74.10
Deluxe

22-340 - Ditto - but 1200 mm sweep brand GEC Deluxe ###### 4315.00 148.20 74.10

22-341 Ceiling fan AC 230 / 220 volts single Fixing Add to

phase 50 HZ complete with capacitor, Super only fixed in
Luxury Super luxury
blade down rod canapoy electronics Deluxe r/r
regulator etc 1400 mm sweep brand
Jamuna 3120.00 ###### 3818.00 148.20 74.10

22-342 - Ditto - but 1200 mm sweep brand 3184.00 - - 148.20 74.10

Jamuna
Ceiling fan AC 230 / 220 volts single Fixing Add to
22-343 phase 50 HZ complete with capacitor, Deluxe Popular Econo only fixed in
blade down rod canapoy electronics r/r
regulator etc 1400 mm sweep brand
Habib 4390.00 ###### 3262.00 148.20 74.10

22-344 - Ditto - but 1200 mm sweep brand Habib 3741.00 - - 148.20 74.10
22-345 - Ditto - but 900 mm sweep brand Habib 3233.00 - - 148.20 74.10
22-346 - Ditto - but Millat (1400/1200 mm sweep) - - 148.20 74.10
22-347 Ceiling fan AC 230 / 220 volts single Fixing Add to
phase 50 HZ complete with capacitor, Super only fixed in
Deluxe
blade down rod canapoy electronics Deluxe r/r
regulator etc 1400 mm sweep brand
National Tongi - ###### - 148.20 74.10
22-347A - Ditto - but 1200 mm sweep brand
- ###### - 148.20 74.10
National Tongi
22-347B - Ditto - but 900 mm sweep brand
- ###### - 148.20 74.10
National Tongi
22-348 Ceiling fan AC 230 / 220 volts single phase 50 HZ Fixing Add to
complete with capacitor, blade down rod canapoy Deluxe Super only fixed in
electronics regulator etc 1400 mm sweep brand Deluxe r/r
SINGER
###### 4100.00 148.20 74.10

448
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Materials & Fixing Add to
Each
Labour only fixed in r/r
22-349 Exhaust fan AC 230/220 volts single phase 50 HZ complete with
capacitor, blade, louver, rain guard etc 300 mm sweep. Brand GEC 5485.00 520.00 260.00

22-349A - Ditto - but other than GEC (Like Millat / National or other E in C's
approved brand) 3538.00 520.00 260.00

22-350 Exhaust fan AC 230/220 volts single phase 50 HZ complete with

capacitor, blade, louver, rain guard etc 400 mm sweep. Brand GEC 6268.00 520.00 260.00

22-351 - Ditto - but other than GEC (Like Millat / National or other E in C's
approved brand) 3634.00 520.00 260.00

22-352 Take down fan externally clean bearings dust from field coils and
clean armature/ commutator provide with fresh lubricant (oil/grease
as required) fix blades, adjust blades for sweet running, refixed & 146.70 98.80 49.40
testing any sweep.

22-353 Complete rewinding of fan/armatures coil with the appropriate super

enamelled winding wire duly disassembling & reassembling taken
out burnt coils completely including 24hrs continuous running of 2129.00 559.00 279.00
different brand & type of 1400mm sweep ceiling fan.

22-354 - Ditto - 1200mm ceiling fan 1816.00 447.00 224.00

22-355 - Ditto - 900mm ceiling fan 1571.00 419.00 210.00

22-356 - Ditto - 400mm exhaust fan 1806.00 419.00 210.00

22-357 - Ditto - 300mm exhaust fan 1589.00 329.00 165.00

22-358 - Ditto - off size table fan 1315.00 329.00 165.00

449
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

Materials & Fixing Add to

Per coil
Labour only fixed in r/r

22-359 Partly rewinding of armatures coil with the appropriate super

enamelled winding wire duly disassembling & reassembling taken
out burnt coils including burnishing heating testing for 24 hrs
138.50 49.10 25.00
continuous running of different brand & type of ceiling/Table/Exhaust
fan not exceeding 50% of total fan coils

Each

22-360 Ceiling fan blades for different brand type and sweep. 259.00 19.80 10.00

22-361 - Ditto - table / Exhaust fan 359.00 59.30 30.00

22-362 Ball bearing for ceiling/Table & Exhaust fan of different sizes 205.00 49.40 24.70

22-363 Rubber insulator for down rod 39.20 29.60 15.00

22-364 Nut bolts off sizes 30.40 14.80 7.00

22-365 Split pin for ceiling fan 34.40 29.60 15.00

22-366 Capacitor 2.5mfd for fan 98.60 14.80 7.00

22-367 Regulator for ceiling fan electronics 275.40 95.80 48.00

22-368 - Ditto - but Inductive 329.00 29.60 15.00

22-369 Clamp hook for ceiling fan as req. 414.00 55.10 28.00

Fan hook for RCC roof slab : Rate is to be taken from SECTION 8
Painting of complete fan off sizes brand & type incl rod and blade as
done by :
22-370 Manually with spd paint & brush 106.00 49.90 25.00

22-371 Done by spray machine with spd paint.. 104.00 47.90 24.00
Per figure / Letter
22-372 Number stamping / embossing on fan body size not less than 9 mm 7.90 7.00 -
22-373 Writing fan number with paint & toly on fan body as per direction
size of letter 1 fig not less than 12mm 7.20 6.00 -

Each sticker
22-374 Supply of printed sticker and writing fan number with marker pen
and paste on fan body as per direction of Engineer in charge (size 7.80 4.10 -
not less than 9 mm)
22-375 Blank
Each
22-376 Switch flame proof sp 5 Amps one way terminal chamber drilled and
tapped on both sides a solid brass threaded plug for fitting the hole
not required. The switch and cover completely inter locked. The unit 680.00 141.00 70.65
should comply with BSS-229, 542 & 889

450
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-377 Switch fuse flame proof sp 230 volts 15 Amps terminal chamber
drilled and tapped 25mm ET on both sides a solid brass threaded
plug for sealing hole not required. The switch and cover completely 1053.00 235.00 118.00
inter locked. The unit should comply with BSS-229, 542 & 889

451
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

Materials & Fixing Add to

Each
Labour only fixed in r/r

22-378 Flame proof gland and armour clamp screwed 25mm ET for cable .
The cable sealing gland with the armour clamps should be patent
design to provide means for attachment detachment of the cable and 12031.00 56.50 28.00
gland from the switch case without interference compound filling BS-
229 & 542.
22-379 Flame proof fitting 20mm ET tapped entry cast iron body grey
painted with heavy glass cemented to fix ring strong wire guard and
lamp holder with terminal chamber. The internal connections of solid
metal passing through insulating sleeves despersive or angle type 2650.00 235.00 118.00
vitreous enamelled reflector over all diameter 175mm suitable for 60
w lamp.
22-380
- Ditto - over all height 325mm & dia 250mm for 100 watt. 714.00 235.00 118.00

22-381 Flame proof fitting bulk head 20mm ET tapped entry cast body
armour platform glass and fittings straps suitable to take upto 100 w
lamp or local made similar to Crescent model, Explosion proof B- 391.00 235.00 118.00
125mm, H-220mm.

22-382 Spare glass and ring above 177.60 117.70 59.00

WOODEN BOARD

Each
22-383 Block hard wood round/rectangular 75mm diameter 75x 75mm 53.90 23.90 12.00

22-384 Block hard wood rectangular recessed 35mm deep 100x 100mm. 65.70 27.40 14.00

22-385 - Ditto - 100x150 mm 75.30 27.40 14.00

22-386 - Ditto - 150x 200 mm 93.20 27.40 14.00

22-387 - Ditto - 200x250 mm 128.10 38.30 19.00

22-388 - Ditto - 250x300 mm 140.00 38.30 19.20

22-389 - Ditto - but 50 mm deep 300x400 mm 260.00 38.30 19.20

22-390 - Ditto - 50 mm deep 400x500 mm 338.00 38.30 19.20

WIRING TELEPHONE CABLE

Materials & Fixing Add to

Per Metre
Labour only fixed in r/r

22-391 House / internal wiring with pvc sheathed telephone cable on or in

prelaid wooden batten / pvc conduit exclusive (battening / laying
25.20 9.60 5.00
conduit is to be paid seperataly) for 1x pair.

22-392 - Ditto - for 2 x pair 35.90 9.60 5.00

22-393 . - Ditto - for 3 x pair 48.70 9.60 5.00

452
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

22-394 - Ditto - for 4 x pair 64.80 9.60 5.00

22-395 - Ditto - for 8 x pair 111.20 9.60 5.00

22-396 - Ditto - for 10 x pair 136.60 9.60 5.00

453
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka

MAIN SWITCH (FUSE) IC Materials & Labour Fixing Add to

Add to for N/L
only fixed in r/r
Each SP DP TP

22-397 Switch fuse i/c 230/220 volt 400 /

380 volts local made capacity 15 362.00 - 332.00 717.00 98.80 49.40
Amps

22-398 - Ditto - but but 30 Amps 616.00 - 332.00 1026.00 98.80 49.40

22-399 - Ditto - but but 60 Amps - - 1693.00 1770.00 148.20 74.12

22-400 - Ditto - but but 100 Amps - - 3336.00 3491.00 247.00 124.00

22-401 - Ditto - but but 200 Amps - - 5643.00 5901.00 494.00 247.00
NO FUSE BREAKER (MCB /
Materials & Labour
MCCB)
Siemens / Add to fixed
ABB / Fixing only
Marlin Gerin Dorman / MEM in r/r
Each LG (Korea) Legrand
(France) / MK (England /
(Italy) Germany)

22-402 Miniature circuit breaker 230/220

volts 50 HZ SP Foreign made
430.00 645.00 645.00 1006.00 74.10 37.10
upto 5 / 6 Amps.

22-403 - Ditto - but 10 Amps 430.00 645.00 645.00 1006.00 74.10 37.10

22-404 - Ditto - but 10 - 16 Amps 430.00 645.00 645.00 1006.00 74.10 37.10

22-405 - Ditto - but 20 - 32 Amps 430.00 868.00 868.00 1006.00 74.10 37.10

22-406 - Ditto - but 40 - 50 Amps 430.00 868.00 868.00 1153.00 74.10 37.10
22-407 Metal clade circuit breaker 400 /
440 volt 50 Hz, 32 Amps TP 2409.00 10888.00 10888.00 12971.00 98.80 49.40
(Triple pole)

22-408 - Ditto - but 40 Amps 2689.00 10888.00 10888.00 14258.00 98.80 49.40

22-409 - Ditto - but 50 Amps 2689.00 10888.00 10888.00 14258.00 98.80 49.40

22-410 - Ditto - but 63 Amps 2689.00 10888.00 10888.00 15595.00 148.20 74.00

22-411 - Ditto - but 100 -125 Amps 3348.00 12206.00 12206.00 18169.00 148.20 74.00

22-412 - Ditto - but 200 Amps 6438.00 20679.00 20679.00 31264.00 371.00 185.30

22-413 - Ditto - but 250 Amps 6438.00 20679.00 20679.00 41622.00 371.00 185.30

22-414 - Ditto - but 300 Amps 14871.00 54051.00 54051.00 85360.00 741.00 371.00

22-415 - Ditto - but 400 Amps 14871.00 56589.00 56589.00 85360.00 741.00 371.00

454
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

22-416 - Ditto - but 500 Amps 30340.00 62935.00 62935.00 85360.00 741.00 371.00

22-417 - Ditto - but 800 Amps 37216.00 127816.00 ####### 137125.00 889.00 445.00

455
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

CUT OUT (PORCELAIN) Materials & Fixing Add to

Labour only fixed in r/r
Each
22-418 Porcelain fuse cut out 230/220 volts best quality upto 15 Amps 110.00 74.10 37.00

22-419 - Ditto - but 30 Amps 125.60 74.10 37.00

22-420 - Ditto - but 60 Amps 176.00 74.10 37.00

22-421 - Ditto - but 100 Amps 226.00 74.10 37.00

22-422 - Ditto - but 200 Amps 518.00 74.10 37.00

Bus bar type distribution board Materials & Labour

Fixing Add to
only fixed in r/r
Each 3 bar 4 bar

22-423 Main distribution busber made of 600 mm long steel sheet

& FI bar with hinged cover & proper sized copper bar 6
mm thick with hammer paints suitable for 400 volts 60 2275.00 2754.00 239.00 120.00
Amps

22-424 - Ditto - but 100 Amps 3098.00 4176.00 344.00 172.00

22-425 - Ditto - but 200 Amps 0.00 0.00 0.00 0.00

22-426 - Ditto - but 300 Amps 5942.00 7499.00 553.81 277.00

22-427 - Ditto - but 500 Amps 5942.00 7499.00 554.00 277.00

Distribution board with fused cut out Materials & Labour Fixing Add to
only fixed in r/r
Each 15 amp 30amp
22-428 Distribution board i/c 230/220 volts sp fused with N/L 2
way. 677.00 1036.00 137.70 69.00

22-429 Add to for additional way 41.90 60.00

22-430 Supply and fixing of foreign made DB / SDB cabinet
having arrangement for fixing MCB's Brand MEM / MK /
2834.00 2834.00 619.00 309.00
TCL / ABB / Legrand

22-431 - Ditto - but having arrangement 30 - 40 MCB's 5263.00 5263.00 928.00 464.00

Steel box (for DB/SDB) Materials & Labour

Complete Complete as
as description Fixing Add to
Each descriptio without busbar only fixed in r/r
n with but depth 200
4xbusbar mm

456
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-432 Steel box made with 18 BG, MS sheet complete with
hinged type door (single / double shutter) built-in type
locking system with necessary arrangement for fixing of
MCB / MCCBs by keeping it's knob out on the top cover ie
shutter of the board, including stove enamelled grey 8441.00 7699.00 593.00 296.00
hammer spray painting to the satisfaction of engineer in
charge .size 900x750x110 mm.

22-433 - Ditto - but 700x600x110 mm 6111.00 5860.00 200.70 100.00

22-434 - Ditto - but 450x330x110 mm 4539.00 4312.00 181.70 91.00

457
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description

EBONITE / PLASTIC BOARD COVER (sheet) Materials & Labour Fixing Add to
only fixed in r/r
Per sq.m Plastic Ebonite
22-435 Switch board/Joint board top cover with plastic/ebonite
sheet incl cutting sizing making holes, screws etc thickness 2064.00 2423.00 148.20 74.00
of 4mm

22-436 - Ditto - but 3mm 1825.00 2184.00 148.20 74.00

Materials & Fixing Add to

Metre Energy
Labour only fixed in r/r
Each Set
22-437 Energy meter electric AC 210/220 volts complete in all respect upto
20 Amps sp. 2543.00 148.20 74.00

22-438 - Ditto - but 50 Amps T/P 6854.00 148.20 74.00

22-439 - Ditto - but over 50 Amps T/P 12122.00 148.20 74.00

22-440 CT suitable for Energy Metre : Rate to be taken from sec:21 - - -

EARTHING
Each set
22-441 Earth complete as per specification as described for electrification. 7894.00 1902.00 951.00

22-442 - Ditto - for lightning 6875.00 1747.00 873.00

LIGHTNING CONDUCTOR
Per Metre
22-443 Down / roof conductor (strips) 25 x 3 mm thick as per approved
designed and drawing and direction of Engineer in Charge. 948.00 37.10 19.00

22-444 Down / roof conductor Round copper conductor for which rate is to
be taken from sec 21 if used as per approved designed and drawing Rate is applicable from sec-21
of concerned authority and direction of Engineer in Charge.

22-445 Air termination for lightning conductor with 12mm diameter of

copper rod 1500mm long with gun metal/copper base 75x38x3mm 1585.00 148.20 74.00
fixed with brass nut & bolts.

22-446 Inspection joint as spd. 162.20 18.50 9.00

VOLTAGE STABILIZER & ELECTRONICS APPLIANCE

Each
22-447 Automatic voltage stabilizer having in put voltage 160-260v AC, out put
220v 5% +/- AC 50Hz, capacity 500VA 6597.00 371.00 185.00

458
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka
Each Materials & Fixing Add to
Labour only fixed in r/r
22-448 Micro Automatic voltage stabilizer having in put voltage 280-4500v
AC, out put voltage 380v+/- 50% +/- AC 50HZ capacity 3KVA 21,684.00 741.00 371.00

22-449 Micro uninterruptable power supply (UPS) with automatic battery

charging system single phase 50 HZ having capacity 650VA 42280.00 371.00 185.00

22-450 Automatic emergency light (portable) lantern type complete with 2x6
watt . Flowers cut tube and special circuit protection. 2131.39 - -

22-451 Electronic cord less fan regulator cum light switch suitable operation
upto 150 watt for light & fan having two socket points. 1576.00 371.00 185.00

22-452 Electronic fan regulator for surface & concealed type with fixing
consumable. 275.00 95.80 48.00

22-453 Electronic light dimmer complete with consumable for surface &
concealed type 1175.00 95.80 48.00

22-454 Electronic call system bell complete with bell push & LED indicator
having a musical alarm capacity 6 points 12118.00 95.80 48.00

22-455 Electronic light dimmer with panel board for lighting control capacity
55367.00 1482.00 741.00
10KW
22-456 Micro electronic digital clock, size 12.5"x4"x3.5"
4708.00 266.00 133.00

22-457 Supply and fixing of Bath bracket fixtures complete without bulb 230
volts Crescent cat no. CBB-4/12-T 12-P 750.00 92.00 46.00

22-458 Supply and fixing of fancy type round tube light fixtures complete
without tube, choke, starter, holder as req. Crescent cat no. CML 42 3182.00 137.70 69.00

22-459 Supply and fixing of Gang switch single (one way) 329.00 137.70 69.00
Supply and fixing of Ceiling light shade fancy Crescent cat no. CPC-
22-460 1446.00 137.70 69.00
34
22-461 Supply and fixing of ceiling light shade fancy without Crescent cat
no. CML 430-Plan 2413.00 137.70 69.00

22-462 Supply and fixing of Switch SP Socket outlet 3 pin 15 Amps

Shuttered pattern concealed type MEM / MK / DORMAN (England) 847.00 68.90 34.00

22-463 Supply and fixing of Switch SP Socket outlet 3 pin 5 Amps Shuttered
pattern concealed type MEM / MK / DORMAN (England) 757.00 68.90 34.00

22-464 Supply and fixing of Socket for TV/Dish Antenna to be fixed at cable
terminal MEM / MK (Singapore / Malaysia) 757.00 68.90 34.00

22-465 Supply and fixing of Socket for Telephone to be fixed at cable

terminal MEM / MK (Singapore / Malaysia) 1059.00 68.90 34.00

459
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Rate in Taka
Materials & Labour
Fixing Add to
with switch without without
Each / Per point without cables only fixed in r/r
board switch board channel

22-466 Wiring one light/fan/bell point

controlled by one switch with
PVC non-sheathed single core 1.5
rm eastern cable in PVC plastic 1,139.00 1,043.00 996.00 724.00 329.00 167.80
channel including switch board
and final sub-ckt.
22-467 Wiring one socket point with
normal final sub ckt PVC non-
sheathed single core 1.5 rm
eastern cable in PVC plastic 545.00 513.00 505.00 406.00 168.10 84.05
channel including switch board
and final sub-ckt. 3 pin 5 Amps
22-468 Wiring one socket point outlet 3
pin 15 Amps with PVC non-
sheathed single core 2.5 rm in 3,925.00 3,842.00 ###### 2,856.90 168.10 84.10
PVC channel as spd.

Per Metre
22-469 Supply and Laying / Wiring of TV
/ Dish line Co-axial 2x.09 mm RJ-
6 cable foreign made as direction - - 74.40 - 13.60 7.00
of Engineer in Charge.

LAMPS (CFL) Materials (brand wise) & Labour

Each Osram Fixing only
Osram
Energypac (German Philips Plasma
economy
y)
22-470 Energy saving lamps thread / pin
type 15 watt 360.00 360.00 - 310.00 286.00 14.00

22-471 Energy saving lamps thread or pin

type 20 watt 341.00 346.00 - 347.00 316.00 14.00

22-472 Energy saving lamps thread or

pin type 23 / 25 watt 377.00 385.00 - 367.00 343.00 17.00

Materials (watt wise) & Labour

Anti insect Fixing only
LAMPS Electric 25 watt 40 watt 60 watt 75/100 watt
(Argenta)

22-473 Lamp electric Sainik / Philips 47.00 47.00 47.00 49.50 60.20 7.00

Materials (brand wise) & Labour

Halogen Fixing only
Mercury Halogen 500 Bulb 300 / Bulb
LAMPS 1000 watt
125/160 watt watt (Philips) 500 watt 1000 watt
(Philips)

22-474 Lamps as spd thread or pin type 407.00 266.00 684.00 206.00 278.00 17.00

Materials (brand wise) & Labour

Fixing only
460
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
Fluorescen
Fluorescent Fluorescent Panel type
t tube
tube Philips tube philips indicating Fixing only
LAMPS Philips Bulb 200 watt
TLD 40 watt TLD 36 watt 4' lamp
TLD 18
4' ft ft (Taiwan)
watt 2' ft

22-475 Lamps as spd thread or pin type 5.62 5.62 4.60 3.32 2.55 1,248.50

VOLTAGE STABILIZER & ELECTRONICS APPLIANCE

Each
Materials & Fixing Add to
Labour only fixed in r/r

22-476 GREEN POWER AUTOMATIC VOLTAGE REGULATOR : 600

VA SINGLE PHASE 5,052.00 741.00 371.00

22-477 - Ditto - but 01 KVA

6,249.00 741.00 371.00
22-478 - Ditto - but 02 KVA
8,644.00 741.00 371.00
22-479 - Ditto - but 03 KVA
12,236.00 741.00 371.00
22-480 - Ditto - but 05 KVA
21,696.00 741.00 371.00

22-481 - Ditto - but 7.5 KVA

29,479.00 741.00 371.00

22-482 - Ditto - but 10 KVA

36,664.00 741.00 371.00

22-483 - Ditto - but 15 KVA

51,033.00 741.00 371.00

22-484 GREEN POWER AUTOMATIC VOLTAGE REGULATOR : 10

KVA THREE PHASE (DRY TYPE) 66,600.00 741.00 371.00

22-485 - Ditto - but 15 KVA

78,574.00 739.00 369.00

22-486 - Ditto - but 20 KVA

96,535.00 739.00 369.00

22-487 - Ditto - but 30 KVA

114,497.00 739.00 369.00

22-488 - Ditto - but 40 KVA

144,432.00 739.00 369.00

22-489 - Ditto - but 50 KVA

174,368.00 739.00 369.00

22-490 - Ditto - but 60 KVA

198,316.00 739.00 369.00

22-491 - Ditto - but 75 KVA

234,239.00 739.00 369.00

22-492 - Ditto - but 100 KVA

330,033.00 739.00 369.00

461
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-493 - Ditto - but 150 KVA
599,454.00 739.00 369.00

22-494 GREEN POWER AUTOMATIC VOLTAGE REGULATOR : 100

KVA THREE PHASE (OIL TYPE) 551,557.00 739.00 369.00

22-495 - Ditto - but 150 KVA

826,964.00 739.00 369.00

22-496 - Ditto - but 200 KVA

970,655.00 739.00 369.00

22-497 - Ditto - but 250 KVA

1,060,462.00 739.00 369.00
22-498 - Ditto - but 300 KVA
1,317,909.00 739.00 369.00

22-499 - Ditto - but 350 KVA

1,437,651.00 739.00 369.00

Each Materials & Fixing Add to

Labour only fixed in r/r
22-500 - Ditto - but 400 KVA 1,659,175.00 739.00 369.00
22-501 - Ditto - but 450 KVA 1,826,814.00 739.00 369.00
22-502 - Ditto - but 500 KVA 2,156,106.00 739.00 369.00
22-503 - Ditto - but 650 KVA 2,395,591.00 739.00 369.00
22-504 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (Off
line-UPS): 600/650 VA (Backup time 15 min-1 phase) 8,992.00 371.00 185.00

22-505 - Ditto - but (Backup time 30 min-1 phase) 12,345.00 369.00 185.00
22-506 - Ditto - but (Backup time 60 min-1 phase) 24,319.00 369.00 185.00
22-507 - Ditto - but (Backup time 120 min-1 phase) 36,293.00 369.00 185.00
22-508 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (Off
line-UPS): 100/1200 VA (Backup time 15 min-1 phase) 12,345.00 369.00 185.00

22-509 - Ditto - but (Backup time 30 min-1 phase) 20,727.00 369.00 185.00
22-510 - Ditto - but (Backup time 60 min-1 phase) 38,688.00 369.00 185.00
22-511 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (Off
line-UPS): 1500 VA (Backup time 60 min-1 phase) 55,452.00 369.00 185.00

22-512 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (Off

line-UPS): 2000 VA (Backup time 60 min-1 phase) 75,808.00 369.00 185.00

22-513 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (On

line-UPS): 1000 VA (Backup time 30 min-1 phase) 57,847.00 369.00 185.00

22-514 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (On

68,624.00 369.00 185.00
line-UPS): 1000 VA (Backup time 60 min-1 phase)
22-515 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (On
99,517.00 369.00 185.00
line-UPS): 2000 VA (Backup time 30 min-1 phase)
22-516 GREEN POWER UNINTERRUPTIBLE POWER
126,100.00 369.00 185.00
SUPPLY (On line-UPS): 2000 VA (Backup time 60 min-1
phase)
462
RESTRICTED
 RESTRICTED
SECTION-22
INTERNAL ELECTRIFICATION RATES
Item Description
22-517 GREEN POWER UNINTERRUPTIBLE POWER
132,087.00 369.00 185.00
SUPPLY (On line-UPS): 3000 VA (Backup time 30 min-1
22-518 phase)
GREEN POWER UNINTERRUPTIBLE POWER
158,431.00 369.00 185.00
SUPPLY (On line-UPS): 3000 VA (Backup time 60 min-1
22-519 phase)
GREEN POWER UNINTERRUPTIBLE POWER
263,804.00 369.00 185.00
SUPPLY (On line-UPS): 5KVA (Backup time 60 min-1
22-520 phase)
- Ditto - but 6 KVA
287,753.00 369.00 185.00
22-521 - Ditto - but 10 KVA
413,482.00 369.00 185.00
22-522 GREEN POWER UNINTERRUPTIBLE POWER SUPPLY (IPS):
26,714.00 369.00 185.00
200 VA (Backup time 02 hours)
22-523 - Ditto - but 300 VA 32,102.00 369.00 185.00
22-524 - Ditto - but 400 VA 37,491.00 369.00 185.00
22-525 - Ditto - but 600 VA 44,675.00 369.00 185.00
22-526 - Ditto - but 800 VA 54,255.00 369.00 185.00
22-527 - Ditto - but 1000 VA 68,624.00 369.00 185.00
22-528 - Ditto - but 1500 VA 86,585.00 369.00 185.00
22-529 - Ditto - but 2000 VA 108,139.00 369.00 185.00

463
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION
Trench
Excavation/Embankment
Trench excavation in soil, Rate is to be taken from similar item of works of section -1
rock and embankments. (earth works)

ROAD BORING

Per Metre Rate in Taka

Materials & Add if fixed
Fixing only
Labour in r/r
23-1 Thrust boring of road and other back filing/make
good the same after placing GI/MS/Casing/Gas 808.00 409.00 205.00
tubing of 150 mm dia.

23-2 - Ditto - but 100 mm dia 693.00 351.00 175.00

23-3 - Ditto - but 75 mm dia 606.00 307.00 153.00

23-4 - Ditto - but 50 mm dia 485.00 245.00 123.00

23-5 - Ditto - but 40 mm dia 441.00 223.00 112.00

23-6 - Ditto - but 25 mm dia 404.00 204.60 102.00

23-7 - Ditto - but 20 mm dia 373.00 188.80 94.00

CASING PIPE

Per Metre

Casing Pipe of various size Rate is to be taken from similar item of works of section -17
and type either MS/GI (Water Supply)

446
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION
LOW PRESSURE GAS & OIL LINE

Per Metre Rate in Taka

Installation Only
Materials & Add if fixed
Labour Except in r/r
With consumable
Consumable

23-8 14.60 kg / sq.cm API grade gas

quality MS Tubing as approved by
respective Gas Co duly
commissioned with installation
including cleaning coaltering, 3,182.00 437.00 281.00 141.00
wrapping, laying (exclusive trench
excavation sand spreading back
filling) of 100 mm dia meter.

23-9 - Ditto - but 75 mm 2,128.00 356.00 234.00 117.00

23-10 - Ditto - but 50 mm 1,440.00 295.00 209.50 105.00

23-11 - Ditto - but 40 mm 1,093.00 255.00 186.30 93.00

23-12 - Ditto - but 25 mm 766.00 234.00 186.30 93.00

23-13 - Ditto - but 20 mm 569.00 206.00 167.60 84.00

BUTT WELDING JOINTS Rate in Taka

Each
Materials & Installation Only (Except Add if fixed
Labour consumables) in r/r

23-14 Butt welded joints made above or in

trench or below ground level
complete in all respect as approved
by respective Gas Co. for pipe and 574.00 287.00 144.00
fittings of 100 mm dia meter

23-15 - Ditto - but 75 mm 445.00 191.60 96.00

23-16 - Ditto - but 50 mm 323.00 143.70 72.00

23-17 - Ditto - but 40 mm 307.00 143.70 72.00

23-18 - Ditto - but 25 mm 242.00 115.00 57.00

447
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

23-19 - Ditto - but 20 mm 221.00 102.60 51.00

448
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION
Rate in Taka
Purging /
Labour Only
Testing
23-20 Purging / Testing of installed gas line with
necessary tools / equipments and ready for
commissioning of 100 mm diameter. 27.50 13.00

23-21 - Ditto - but 75 mm diameter 21.20 10.00

23-22 - Ditto - but 50 mm diameter 19.70 9.00

23-23 - Ditto - but 40 mm diameter 19.00 9.00

23-24 - Ditto - but 25 mm diameter 18.40 9.00

23-25 - Ditto - but 20 mm diameter 17.80 8.00

BEND/ELBOW Rate in Taka

Materials & Add if fixed

Each Fixing only
Labour in r/r
Bend/Elbow (except welding) of 100 mm
23-26 1,042.00 263.00 132.00
diameter
23-27 - Ditto - but 75 mm diameter 554.00 164.60 82.00

23-28 - Ditto - but 50 mm diameter 335.00 131.70 66.00

23-29 - Ditto - but 40 mm diameter 289.00 109.80 55.00

23-30 - Ditto - but 25 mm diameter 171.00 101.30 51.00

23-31 - Ditto - but 20 mm diameter 133.00 87.80 44.00

MS REDUCER

Each
23-32 MS Reducer (except welding) 100x down to 20 576.00 131.70 66.00
mm dia

23-33 - Ditto - but 75 x down to 20 mm dia 523.00 109.80 55.00

449
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

23-34 - Ditto - but 50 x down to 20 mm dia 274.00 94.10 47.00

23-35 - Ditto - but 40 x down to 20 mm dia 250.00 82.30 41.00

450
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

TEE EQUAL / UNEQUAL Rate in Taka

Each Materials & Labour Add if fixed

Fixing only
in r/r
Equal Unequal
23-36 Tee equal / unequal (MS) API grade
(except welding) of 100 mm dia 1,347.00 1,407.00 329.00 165.00

23-37 - Ditto - but 75 mm dia 1,018.00 1,018.00 263.00 132.00

23-38 - Ditto - but 50 mm dia 667.00 637.00 188.20 94.00

23-39 - Ditto - but 40 mm dia 500.00 494.00 164.60 82.00

23-40 - Ditto - but 25 mm dia 446.00 446.00 146.40 73.00

23-41 - Ditto - but 20 mm dia 502.00 - 131.70 66.00

FLANGE W/N 150 R/R Rate in Taka

Materials & Add if fixed

Each Fixing only
Labour in r/r

23-42 Flange w/n 150 r/r as per approved design and

specification of respective Gas Co. Ltd for 100
1628.00 131.70 66.00
dia meter.

23-43 - Ditto - but 75 mm diameter 1487.00 109.80 55.00

23-44 - Ditto - but 50 mm diameter 880.00 101.30 51.00

23-45 - Ditto - but 40 mm diameter 783.00 94.10 47.00

23-46 - Ditto - but 25 mm diameter 453.00 94.10 47.00

GASKET ASBESTOS
Each
23-47 Gasket asbestos as required and approved
specification Gas Co. Ltd for 100 mm diameter 177.00 32.90 16.00

23-48 - Ditto - but 75 mm diameter 158.00 26.30 13.00

23-49 - Ditto - but 50 mm diameter 130.00 22.00 11.00

23-50 - Ditto - but 25 mm diameter 100.00 22.00 11.00

451
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

FlANGE / VALVE / SERVICE TEE Rate in Taka

Add if fixed
Each Materials & Labour Fixing only
in r/r
23-51 Flange / Valve / Service Tee as per
approved design and specification of
respective Gas Co Ltd for 100 x 75 x 117,611.00 263.00 132.00
down to 20 mm diameter

23-52 - Ditto - but 75 x 50x down to 20

mm diameter 92,421.00 220.00 110.00

23-53 - Ditto - but 50 x 40x down to 20

mm diameter 18,150.00 188.20 94.00

23-54 - Ditto - but 40 x 25x down to 20

mm diameter 18,126.00 164.60 82.00

23-55 - Ditto - but 25x down to 20 mm 2,048.00 131.70 66.00

diameter

SADDLE WELDING

Each Rate in Taka

Welding/ Test Drilling/ Commission Labour Only

23-56 Saddle welding and drilling of existing

serviceable line for commissioning of new line 1,976.00 1,317.00
100x75 mm dia

23-57 - Ditto - but 75x50 mm diameter 1,197.00 659.00

23-58 - Ditto - but 50x40 mm diameter 918.00 439.00

23-59 - Ditto - but 37.5x25 mm diameter 798.00 439.00

23-60 - Ditto - but 25x20 mm diameter 659.00 329.00

452
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

VALVE PLUG Rate in Taka

Materials & Add if fixed

Each Fixing only
Labour in r/r

23-61 Valve plug S/P class 150 S/P as per approved and
specification of respective Gas Co. Ltd for 100 26,224.00 1,676.00 838.00
mm dia.

23-62 - Ditto - but 75 mm diameter 16,644.00 1,676.00 838.00

23-63 - Ditto - but 50 mm diameter 8,502.00 1,317.00 659.00

23-64 - Ditto - but 40 mm diameter 7,903.00 1,317.00 659.00

23-65 - Ditto - but 25 mm diameter 4,371.00 659.00 330.00

23-66 - Ditto - but 20 mm diameter 2,485.00 329.00 165.00

453
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

STUD BOLT Rate in Taka

Materials & Add if fixed

Each Fixing only
Labour in r/r

23-67 Stud bolts as per approved design and

specification of respective Gas Co. Ltd for 20x30 146.00 26.30 13.00
down to 20 mm long

23-68 - Ditto - but 25x50 down to 20 mm long 170.00 26.30 13.00

GAS REGULATOR

Each
23-69 Gas Regulator as per approved design and
specification of respective Gas Co. Ltd for 25
down to 20 mm dia (Domestic use) 1,928.00 132.20 66.00

23-70 - Ditto - but (Commercial use) 3,782.00 189.50 95.00

GAS VALVE PIT CMS

Gas valve pit masonry

Rate is to be taken from similar item of B/R
works central metering
works section (1-20)
station works.

DOMESTIC/COMMERCIAL GAS TUBING

Per Metre

Tubes of various size as

required for domestic / Rate is to be taken from Section -17 (Water Supply)
commercial Gas line

454
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

GAS VALVE

Each Rate in Taka

Add if fixed in
Materials & Labour Fixing only
r/r
23-71 Gas valve complete with all accessories as per approved 732.00 133.60 67.00
specification of Gas Co. Ltd for 25 mm dia.

23-72 - Ditto - but 20 mm dia 672.00 133.50 67.00

23-73 - Ditto - but 13 mm dia 530.00 111.10 56.00

23-74 - Ditto - but 6.5mm dia 320.00 110.60 55.00

DOMESTIC BURNER

Each Rate in Taka

Materials & Add if fixed in Add to for

Fixing only
Labour r/r servicing

23-75 22 BG steel sheet gas stove/burner complete with

all accessories as per approved design and
specification of respective Gas Co. Ltd size 1,010.00 111.50 55.70 167.00
350x350 mm (single)

23-76
- Ditto - but 300x300 mm (single) 950.00 111.70 55.80 167.50

23-77 20 BG steel sheet gas stove/burner complete with

all accessories as per approved design and
specification of respective Gas Co. Ltd size 1,965.00 168.50 84.30 253.00
750x300-350 mm (double)

23-78 22 BG steel sheet gas stove/burner complete with

all accessories as per approved design and
specification of respective Gas Co. Ltd size 1,245.00 167.20 83.60 251.00
650x300-350 mm (double)

23-79 - Ditto - but Auto fire ignation system size 650 x

350 mm (double) local made 4,484.00 233.00 116.30 349.00

23-80 - Ditto - but Auto fire ignation system size 650 x

350 mm (double) foreign made 6,225.00 238.00 119.00 357.00

GAS BURNER KNOB

Each

23-81 Knob for Gas stove / burner 63.00 33.00 17.00 0.00

455
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

456
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

COMMERCIAL BURNER
Rate in Taka
INJECTOR NOZZLE

Materials & Add if fixed in Add to for

Each Fixing only
Labour r/r servicing

23-82 Injector Nozzle complete set for

C/Burner tondoor 4.25 cu.m 905.00 66.40 33.00 0.00

23-83 - Ditto - but 3.50 cu.m 845.00 66.30 33.00 0.00

23-84 - Ditto - but 2.75 cu.m 785.00 66.30 33.00 0.00

23-85 - Ditto - but 2.00 cu.m 760.00 53.00 27.00 0.00

23-86 - Ditto - but 1.50 cu.m 688.00 53.00 27.00 0.00

23-87 Injector Nozzle only 146.00 37.90 19.00 0.00

COMMERCIAL STAR BURNER

Each
23-88 Commercial star burner complete set
for C/burner tondoor 4.25 cu.m 891.00 53.20 26.60 80.00

23-89 - Ditto - but 3.50 cu.m 772.00 53.10 26.60 80.00

23-90 - Ditto - but 2.75 cu.m 703.00 44.30 22.20 66.00
23-91 - Ditto - but 2.00 cu.m 589.00 44.30 22.20 66.00
23-92 - Ditto - but 1.50 cu.m 559.00 44.30 22.20 67.00

TONDOOR

Each

23-93 Earthen tondoor large size 3,035.00 1,239.00 619.00 310.00

23-94 - Ditto - but medium size 2,491.00 1,054.00 527.00 264.00

23-95 - Ditto - but small size 2,073.00 876.00 438.00 219.00

457
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION
23-96 Steel tondoor locally made with best
quality steel sheet / plate as required 6,853.00 1,177.00 589.00 294.00
(weight near about 60 kg).

458
RESTRICTED
 RESTRICTED
SECTION-23
GAS / OIL LINE (SUPPLY) RATES
ITEM DESCRIPTION

MS TOP PLATE Rate in Taka

Materials & Add if fixed in Add to for

Per Sq. m Fixing only
Labour r/r servicing

23-97 MS top plate for tondoor made by

steel plate of 20mm thick 6,633.00 2,082.00 1,041.00 0.00

23-98
- Ditto - but 13 mm thick 5,073.00 2,080.00 1,040.00 0.00
23-99
- Ditto - but 9 mm thick 4,242.00 2,087.00 1,044.00 0.00

VALVE PIT COVER Rate in Taka

Add if fixed in
Per Sq. m Materials & Labour Fixing only
r/r
23-100MS Valve pit cover as
specified by respective gas 17,117.00 2,574.00 1,287.00
co.

LP GAS REGULATOR

Each

23-101LP Gas regulator standard size

foreign made and approved quality 1236.00 278.00 139.00

LP GAS HOSE PIPE

Each

23-102LP Gas hose pipe 12 mm dia

approved quality 1.5 m long. 180.00 96.40 48.00

LP GAS BURNER

Each
23-103LP Gas burner (single) size 350x350 971.00 132.80 66.00
mm

LP GAS NIPPLE

Each

23-104LP Gas nipple made of brass 121.50 37.60 19.00

459
RESTRICTED
 RESTRICTED
SECTION-24
AIR CONDITION DUCTING AND PERIODICAL MAINTENANCE / SERVICING RATES

Rate in Taka
Item no Description of works M/Unit Add if
Materials Fixing
fixed in
and labour only
R/R
24-001 Supply & installation of Air Condition ducting work
including bends, tees, reducers, branch takeoffs, air
chamber etc. comprising with 26 BG GP sheet, MS
angle, FI bar & 25/30 mm thick glass wool cover,
hanging rod, clamps, rawl bolts and nuts complete
with reinforced aluminium foil vapour barrier sq.m 1242.00 323.00 162.00
adhesive tape, pin, washer, as per drg & direction of
Engineer in charge having cross sectional area upto
0.04 sq.m as per specification.

24-002 - Ditto - but with 24 BG for over 0.04 sq.m

upto 0.18 sq.m cross sectional area. sq.m 1448.00 323.00 162.00

24-003 - Ditto - but with 22 BG with 40 / 50 mm thick

glass wool cover for over 0.18 sq.m upto 0.31
sq.m cross sectional area. sq.m 1888.00 359.00 180.00

24-004 - Ditto - but with 20 BG for over 0.31 sq.m

upto 0.60 sq.m cross sectional area. sq.m 2025.00 401.00 201.00

24-005 - Ditto - but with 18 BG for over 0.60 sq.m

cross sectional area. sq.m 2396.00 455.00 228.00

24-006 Supply & installation of adjustable type ceiling

mounted Air supply diffuser having neck velocity not
more than 3 metre / sec at a pressure drop of 2 mm
Wg made with 18 BG sheet and other accessories as Each 2294.00 96.00 48.00
required including epoxy painting as per direction of
Engineer in charge size 200x200 mm.

24-007 - Ditto - but size 250x250 mm. Each 2917.00 96.00 48.00

24-008 - Ditto - but size 300x300 mm. Each 3352.00 128.00 64.00

24-009 - Ditto - but size 350x350 mm. Each 3621.00 128.00 64.00

24-010 - Ditto - but size 400x400 mm. Each 4,491.00 192.00 96.00

24-011 - Ditto - but size 450x450 mm. Each 13,925.00 192.00 96.00
24-012 Supply & installation of adjustable type Air receiving
return grill having neck velocity not more than 3 metre
/ sec at a pressure drop of 2 mm Wg made with 18
BG sheet and other accessories as required including Each 3437.00 213.00 106.00
epoxy painting as per direction of Engineer in charge
size 200x200 mm.

24-013 - Ditto - but size 250x250 mm. Each 3706.00 213.00 106.00

458
RESTRICTED
 RESTRICTED
SECTION-24
AIR CONDITION DUCTING AND PERIODICAL MAINTENANCE / SERVICING RATES

Rate in Taka
Item no Description of works M/Unit Add if
Materials Fixing
fixed in
and labour only
R/R
24-014 - Ditto - but size 300x300 mm. Each 4148.00 239.00 120.00

24-015 - Ditto - but size 350x350 mm. Each 4270.00 239.00 120.00

24-016 - Ditto - but size 400x400 mm. Each 4,976.00 274.00 137.00

24-017 - Ditto - but size 450x450 mm. Each 5,159.00 274.00 137.00

459
RESTRICTED
 RESTRICTED
SECTION-24
AIR CONDITION DUCTING AND PERIODICAL MAINTENANCE / SERVICING RATES

Rate in Taka
Item no Description of works M/Unit Add if
Materials Fixing
fixed in
and labour only
R/R
24-018 Supply & installation of volume control / splitter
damper made with 18 BG sheet and other accessories
with locking arrangement as required including 2
coats painting with synthetic paint complete all as per sq.m 1,617.00 359.00 180.00
direction of Engineer in charge.

24-019 Supply and installation of pre-filter having an

efficiency of 65% and shall be complete with steel
framing and fixing materials as required. Filter depth
shall be 50mm and initial pressure drop shall not be
more than 6mm Wg. The filter shall be consist with
modular holding frame made by 16 SWG sheet steel Each 28,092.00 958.00 479.00
corners with reinforced angle, neoprene seal integral
spring, suitable for servicing from duty end and size
shall be 600x300x50 mm.

24-020 Supply and installation of intermediate filter

constructed with ultra fine glass fiber media formed
into thin mat with water resistant binder, packing and
galvanized metal cell side. The filter shall have dust
stop efficiency of 85% as per ASH RAE 52-76, test
initial pressure drop shall not be more than 125mm
Wg. The filter shall be supplied along with modular
holding frame constructed with 16 BG sheet steel. Each 49,400.00 1,916.00 958.00
Filter shall be complete with neoprene seal, integral
spring type latches shall be serviceable from side.
Intermediate filter shall be installed in combination
with pre-filter. Filter size shall be 600 x 300 x 50 mm.

24-021 Supply and installation of Hepa-filter of 99.97% DOP

with waterproof and fire retardant glass fiber media,
all side aluminium. Filter shall be complete with craft
paper separator (Max 85% Relative Humidity)
neoprene rubber band and gasket. Initial air pressure
drop across the filter shall not be more than 25 mm
Wg. Filter shall also be complete with holding frame
constructed with 16 BG sheet steel. Each filter shall
be complete with four spring latch assemblies for Each 2,656.00 1,916.00 958.00
sealing pre-gasket filter. Holding frame shall be
suitable to service filter from side. Filter shall be
installed on discharge side of air handling unit.
Required duct and installation of filters shall be done
as per direction. Filter size shall be 600x300x150mm.

460
RESTRICTED
 RESTRICTED
SECTION-24
AIR CONDITION DUCTING AND PERIODICAL MAINTENANCE / SERVICING RATES

Rate in Taka
Item no Description of works M/Unit Add if
Materials Fixing
fixed in
and labour only
R/R
24-022 Periodical inspection / Trouble shooting and
preparation of inspection report highlighting the
present and future trouble / problem and remedy by a
Engineer / licenciate expert for maintenance of central
Each 2,076.00 - -
air conditioning plant having capacity upto 30 TR as
per direction of Engineer in charge.

24-023 - Ditto - but over 30 TR upto 60 TR capacity. Each 3,113.00 - -

24-024 - Ditto - but over 60 TR capacity. Each 4,730.00 - -

24-025 - Ditto - but split / package / almirah type Air

conditioner upto 3 ton capacity. Each 1,038.00 - -

24-026 - Ditto - but split / package / almirah type Air

conditioner over 3 ton capacity.
Each 1,557.00 - -

24-027 Periodical servicing / cleaning / routine maintenance

of installed split type Air condition condensing and fan
coil unit including testing, continuous trial run for a
period of 6 hrs as per satisfaction of engineer in Each 1,437.00 - -
charge having capacity upto 3 ton.

24-028 - Ditto - but capacity over 3 ton Each 1,856.00 - -

24-029 - Ditto - but all window type Air conditioner Each 958.00 - -
24-030 Servicing / cleaning / routine maintenance of installed
Central Air condition Plant (Chiller, Air handling unit,
water circulating pump etc.) including testing,
continuous trial run for a period of 6 hrs as per Each 8,382.00 - -
satisfaction of Engineer in charge having capacity upto
30 TR.

24-031 - Ditto - but over 30 TR upto 60 TR capacity. Each 10,777.00 - -

24-032 - Ditto - but over 60 TR capacity. Each 13,830.00 - -

24-033 Gas charging as required for split type Air conditioner
having capacity upto 3 ton including testing and trial
Each 9,976.00 509.00 -
run for 6 hrs.

24-034 - Ditto - but capacity over 3 ton Each 12,660.00 611.00 -

461
RESTRICTED
 RESTRICTED
SECTION-24
AIR CONDITION DUCTING AND PERIODICAL MAINTENANCE / SERVICING RATES

Rate in Taka
Item no Description of works M/Unit Add if
Materials Fixing
fixed in
and labour only
R/R
- Ditto - but for window type AC 18,000 -
24-035 Each 6,189.00 509.00 -
22,000 BTU

- Ditto - but for window type AC 24,000 -

24-036 Each 8,357.00 611.00 -
28,000 BTU

462
RESTRICTED
 RESTRICTED
SECTION-24
AIR CONDITION DUCTING AND PERIODICAL MAINTENANCE / SERVICING RATES

Rate in Taka
Item no Description of works M/Unit Add if
Materials Fixing
fixed in
and labour only
R/R
24-037 Installation / Reinstallation of split type Air
conditioner with all required consumables like
holdfast, rawl bolt, MS clamps etc. as required having
capacity upto 3 ton including testing / commissioning
Each 2,018.00 1,018.00 -
with the satisfaction of Engineer in charge including
making holes in brick wall and make good the same in
all respect.

24-038 - Ditto - but capacity over 3 ton Each 2,937.00 1,527.00 -

24-039 - Ditto - but all types of window type Air conditioner.

Each 1,763.00 763.00 -

24-040 Supply and fixing of selector switch assembly for

window type Air conditioner all complete as spd. Each 838.00 98.80 49.00

463
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-001 Supply and Installation of end

suction vertical discharge direct
coupled centrifugal pumping set
having capacity 150 GPM against
water head 60 metre at efficiency
not less than 60% complete with
Motor electric AC 400 volt, 50 Hz,
3 phase, HP 25, as specified brand
and model including base plate,
coupling guard, control panel with Per set 242,839.00 4,251.00 10,777.00 1,886.00
starter and switches, connecting
cables and testing / commissioning
/ trial run to the satisfaction of the
Engineer in charge.

25-002 Supply and Installation of

multistage Jokey pumping set
having capacity 12 GPM against
water head 60 metre at efficiency
not less than 70% complete with
Motor electric AC 230 volt, 50 Hz,
1 phase, 1.5 KW, as specified
brand and model with base plate,
coupling guard, provision for
connection to main control panel Per set 148,037.00 2,125.00 5,029.00 943.00
with starter and switches as
required all connecting cables
including testing / commissioning /
trial run to the satisfaction of the
Engineer in charge.

25-003 Supply and fixing of fire hydrant

box with 37.5 mm dia brass
hydrant valve fitted with 100 mm
dia vertical riser pipe, for
connection with 37.5 mm dia hose. Per set 8,472.00 689.00 - 344.00

464
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-004 Supply and fixing of fire hydrant

hose pipe 37.5 mm dia (Canvas) 30
metre in length capable to work
against 200 PSIG pressure with all
fittings i.e. 18.7 mm dia brass
nozzle having capacity 30 GPM
throw 15 metre, hose cradle Per set 30,395.00 459.00 - 230.00
oblique type, landing valve suitable
to withstand water pressure 300
PSIG. as spd.

25-005 Pressure reducing valve Rate exit in section 17

25-006 Supply and fixing of MS pipe with
all fittings i.e.. Tee, Bend, Elbow,
etc. to withstand water pressure
300 PSIG. as spd including red
Metre 2,272.00 191.60 - 96.00
oxide painting and testing /
commissioning 100 mm dia

25-007 - Ditto - but 75 mm dia Metre 1,559.00 172.10 - 86.00

25-008 - Ditto - but 50 mm dia Metre 1,096.00 143.70 - 72.00

25-009 - Ditto - but 37.5 mm dia Metre 803.00 106.30 - 53.00

25-010 - Ditto - but 25 mm dia Metre 699.00 89.10 - 45.00

25-011 Supply and fixing of ball valve

heavy duty to withstand water
pressure 300 PSIG. Foreign made Each 4,962.00 172.00 - 86.00
(UK) as spd 50 mm dia

25-012 - Ditto - but 37.5/40 mm dia Each 3,131.00 138.00 - 69.00

25-013 - Ditto - but 25 mm dia Each 2,510.00 115.00 - 57.00

25-014 Supply and fixing of ball valve to

withstand water pressure 220
PSIG. Foreign made (UK) as spd Each 1,010.00 172.00 - 86.00
50 mm dia

25-015 - Ditto - but 37.5/40 mm dia Each 856.00 138.00 - 68.90

25-016 - Ditto - but 25 mm dia Each 654.00 115.00 - 57.00
25-017 - Ditto - but 20 mm dia Each 571.00 92.00 - 46.00
25-018 - Ditto - but 12.5 mm dia Each 451.00 92.00 - 46.00

465
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-019 Supply and fixing of gate valve

flanged end type to withstand water
pressure 300 PSIG. Foreign made
UK / Italy as spd 100 mm dia Each 11,669.00 449.00 - 225.00

25-020 - Ditto - but 75 mm dia 9,543.00 359.00 180.00

Each -
25-021 - Ditto - but 50 mm dia 5,952.00 299.00 150.00
Each -
25-022 - Ditto - but 37.5 / 40 mm dia 5,289.00 299.00 150.00
Each -
25-023 - Ditto - but 25 mm dia 5,879.00 257.00 128.00
Each -
25-024 Supply and fixing of globe valve
flanged end type to withstand water
pressure 300 PSIG. Foreign made
UK / Italy as spd 100 mm dia Each 11,573.00 449.00 - 225.00

25-025 - Ditto - but 75 mm dia Each 9,508.00 359.00 - 180.00

25-026 - Ditto - but 50 mm dia Each 8,048.00 299.00 - 150.00

25-027 - Ditto - but 37.5 / 40 mm dia Each 6,547.00 299.00 - 150.00

25-028 Supply and fixing of Auto Air Vent

valve floating type to withstand
water pressure 300 PSIG. Foreign
made UK / Japan as spd 25 mm dia Each 4,969.00 180.00 - 90.00

25-029 - Ditto - but 20 mm dia Each 4,341.00 149.70 - 75.00

25-030 - Ditto - but 12.5 mm dia Each 3,742.00 149.70 - 75.00
25-031 Supply and fixing of pressure auto
relief valve to withstand water
pressure 300 PSIG. Foreign made
UK / Italy as spd 50 mm dia Each 11,001.00 224.50 - 112.00

25-032 - Ditto - but 37.5 / 40 mm dia Each 9,759.00 179.60 - 90.00

25-033 - Ditto - but 25 mm dia Each 5,538.00 149.70 - 75.00

466
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-034 Supply and fixing of pressure

switch suitable to cut out and cut in
its preset pressure as spd foreign
origin (China) to be fitted in 25 mm Each 8,562.00 898.00 - 449.00
dia water line

25-035 Supply and fixing of pressure

gauge range 0 - 500 PSIG as spd
foreign origin (USA) Each 4,191.00 599.00 - 299.00

25-036 Supply and fixing of Y-Strainer

brass suitable to withstand a
pressure 300 PSIG as spd foreign
origin (Italy) 100 mm dia Each 12,274.00 898.00 - 449.00

25-037 - Ditto - but 75 mm dia Each 5,987.00 599.00 - 299.00

25-038 - Ditto - but 50 mm dia Each 3,083.00 449.00 - 225.00

25-039 - Ditto - but 37.5 / 40 mm dia Each 2,078.00 449.00 - 225.00

25-040 - Ditto - but 25 mm dia Each 1,167.00 359.00 - 180.00

25-041 Supply and fixing of flexible joints

suitable to withstand a pressure
300 PSIG as spd foreign origin
(Italy/Germany) 100 mm dia x 300 Each 7,544.00 299.00 - 150.00
mm long

25-042 - Ditto - but 75 mm dia x 300 mm Each 5,525.00 257.00 - 128.00

long

25-043 - Ditto - but 50 mm dia x 300 mm Each 5,254.00 225.00 - 112.00

long

25-044 - Ditto - but 40/37.5 mm dia x 300 Each 4,715.00 225.00 - 112.00
mm long

25-045 - Ditto - but 25 mm dia x 300 mm Each 2,874.00 179.60 - 90.00

long

25-046 - Ditto - but 20 mm dia x 300 mm Each 2,215.00 179.60 - 90.00

long

25-047 - Ditto - but 12.5 mm dia x 300 Each 1,634.00 137.70 - 69.00
mm long

467
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-048 Supply and fixing of fire brigade

connection 65 mm dia 2 way
suitable to withstand a pressure
300 PSIG as spd foreign origin Each 22,512.00 2,754.00 - 1,377.00
(Malaysia)

25-049 Supply and fixing of landing valve

suitable to withstand a pressure
300 PSIG as spd foreign origin
(UK) 50 mm dia Each 8,133.00 230.00 - 115.00

25-050 - Ditto - but 37.5 / 40 mm dia Each 7,893.00 230.00 - 115.00

25-051 - Ditto - but 25 mm dia Each 6,040.00 172.10 - 86.00
25-052 Supply and fixing of Fire alarm
bell, DC 24 volt of 150 mm dia
gong red colour capable to produce
90 db sound at a distance of 1 Each 4,899.00 230.00 - 115.00
metre foreign origin (UK)

25-053 Supply and fixing of break glass

switch or pull station complete with
all accessories as required foreign
origin (UK/Malaysia) Each 3,582.00 230.00 115.00

25-054 Supply and fixing of central control

fire alarm panel surface type made
with 20 gauged steel sheet
complete with red enameled paint.
All indicating lamp & display LCD
shall be on front side cover /
shutter. The panel consists at least
fire indication lamp to indicate the
location of break glass switch
elegised, Master alarm bell off 4x Each 165,185.00 3,532.00 11,974.00 1,766.00
light for remote sensor, 24 volt DC
nickel cadmium re-chargeable
battery etc. as required for
satisfactory functioning foreign
origin (UK/Malaysia)

468
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-055 Supply and Installation of Fully

automatic pressure boosting
package unit with 4 nos vertical
multistage inline pump having
capacity 25-15M3/hr, at working
pressure 3-4kg, 1.1 kw, size 50x50
mm spd brand, model complete
with flanges, volute casing,
impeller equipped with replaceable
casing wear rings, 2xcheck valve,
4x shut off valves, membrane tank,
analogue pressure sensor for
suction. Complete unit mounted on Each
567,750.00 17,602.00 107,768.00 8,083.00
an epoxy covered base plate. unit
foreign origin (Germany / France)
to be controlled by an auto
pressurised water supply panel
(rate is to be estimated / paid
separately) for high rise
multistoried building including 6
month trial run / operation

25-056 Add or Deduct to / from the above

item for 1xpump motor having
capacity as stated above incl one Each 119,486.00 4,401.00 4,490.00 2,021.00
month trial run set

25-057 - Ditto - item no 25-055 but 4 nos

pump having capacity 45-25M3/hr,
at working pressure 3-4kg, 1.5 kw,
size 75x75 mm and all other Per
700,065.00 17,602.00 107,768.00 8,083.00
specification same as above item. unit

25-058 Add to or Deduct from the above

item for 1xpump motor having
similar capacity as stated above Each 152,565.00 4,401.00 4,490.00 2,021.00
incl one month trial run set

25-059 - Ditto -item no 25-055 but 4 nos

pump having capacity 80-36M3/hr,
at working pressure 3-4kg, 3 kw,
size 100x100 mm and all other
Per
1,108,879.00 24,068.00 107,768.00 11,316.00
specification same as above item. unit

469
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-060 Add to or Deduct from the above

item for 1xpump motor having
similar capacity as stated above Each
254,768.00 6,017.00 4,490.00 2,829.00
incl one month trial run set

25-061 - Ditto - item no 25-055 but 4 nos

pump having capacity 80-36M3/hr,
at working pressure 3.5-5kg, 5.5
kw, size 150x150 mm and all other Per
1,314,297.00 24,068.00 107,768.00 11,316.00
specification same as above item. unit

25-062 Add to or Deduct from the above

item for 1xpump motor having
similar capacity as stated above Each
incl one month trial run 306,123.00 6,017.00 4,490.00 2,829.00
set

25-063 Supply and Installation of auto

pressurised water supply system
boosting package unit control
panel equipped with pressure tank
and pressure transmitter, butterfly
valves, motor starter-panel and all
other fittings, connecting cables as
required for satisfactory operation
Per
398,943.00 7,185.00 - 2,874.00
of the system consists 4x1.1 / unit
4x1.5 kw pumping package unit
powered by 3 ph AC 380-415 volt,
50 Hz including testing /
commissioning.

25-064 Add to or Deduct from the above

item for 1xpump motor (Except
pressure Tank) having similar
Each
capacity as stated above. 73,163.24 1,796.00 - 719.00
set

25-065 - Ditto - item no 25-063 but 4x 3 /

4x 5.5 kw pumping package unit
powered by 3 ph AC 380-415 volt,
50 Hz including testing / Each
416,579.00 7,185.00 - 2,874.00
commissioning. set

470
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-066 Add to or Deduct from the above

item for 1xpump motor (Except
pressure Tank) having similar
Each
capacity as stated above. 76,244.00 1,796.00 - 719.00
set

25-067 Supply and Installation of fire

pump control panel equipped with
starter/magnetic switch and all
other fittings volt meter ammeter
indicating lamp etc., connecting
cables as required for satisfactory Each
operation of the system powered by set 97,768.00 5,149.00 - 2,095.00
3 ph AC 380-415 volt, 50 Hz
including testing / commissioning.

25-068 Supply and installation of Chlorine

gas cylinder (50 kg) filled with gas
and cylinder mounted Gas control
unit (vacuum feed type regulator)
having capacity 10 - 50 PPD,
complete with all accessories
including Testing and Each 284,028.00 1,227.00 4,790.00 494.00
commissioning (Brand : Regal,
Model : 210, Country of origin :
USA).

25-069 Supply and installation of Chlorine

gas Ejector unit complete with all
accessories, including testing
commissioning (Brand : Regal,
Model : A-920, Country of origin : Each 78,449.00 554.00 - 247.00
USA).

471
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-070 Supply and installation of vertical

high pressure centrifugal / Boosting
pumping set complete with
induction motor AC 400/220 volt
(Three / Single phase), 50 Hz, 2/3
HP country of origin : USA/ Italy
complete with push button starter, Each
117,568.00 2,934.00 25,745.00 1,467.00
MCCB, connecting cable, check set
valve, suction pipe etc as required
including testing commissioning.

25-071 Supply and fixing of chlorine gas

leakage detector with electronic
sensor alarm complete as spd.
Brand : Regal, Model : 3000,
country of origin : USA. including Each 156,775.00 1,048.00 - 494.00
testing commissioning.

25-072 Supply and fixing of chlorine gas

cylinder weighing scale (kg)
capacity 150 kg minimum complete
as spd. Country of origin : China. Each 36,539.00 554.00 - 247.00

Electric wiring
Rate exist in section 21 & 22
Fire extinguisher

Elbow
Flange (Local made) Rate exist in section 17
Check valve

Chlorine Test Kit

Chlorine gas plant spare
Rate exist in section 29
Chlorine gas cylinder
Chlorine gas

472
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

New Item
25-001A Supply and Installation of end suction
vertical discharge direct coupled
centrifugal pumping set having capacity
250 USGPM/2900RPM against water
head 75 metre at efficiency not less than
60% complete with Motor electric AC
400 volt, 50 Hz, 3 phase, HP 35, as
specified brand and model including
base plate, coupling guard, control Per set 586,021.00 6,107.00 10,777.00 2,814.00
panel with starter and switches,
connecting cables and testing /
commissioning / trial run to the
satisfaction of the Engineer in
charge.(Made in UK)

25-002A Supply and Installation of multistage Jokey

pumping set having capacity 20 US GPM
against water head 120 metre at efficiency
not less than 70% complete with Motor
electric AC 230 volt, 50 Hz, 1 phase, 3.2
KW/2900 RPM, as specified brand and
model with base plate, coupling guard,
provision for connection to main control
panel with starter and switches as required
all connecting cables including testing /
commissioning / trial run to the satisfaction Per set 304,624.00 2,125.00 5,029.00 943.00
of the Engineer in charge.(Made in UK)

25-073 Supply & Installation of end section

Vertical discharge direct coupled
Centrifugal pumping set having
capacity 350 GPM, 90 mtr head, 2900
rpm and efficiency minimum 70%
complete with motor electric AC 400
volt 50Hz, 3 Ph, 50 HP as spd brand
and model including base plate, Each
coupling guard, (except control panel & 699,821.00 5,808.00 8,981.00 2,664.00
set
switch), connecting cable with testing/
commissioning/ trial run to the
satisfaction of the Engineer-in-Charge.
(Origin-USA/UK/Italy/Germany).

473
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run

25-074 Supply & Installation of end section

Vertical discharge direct coupled
Centrifugal pumping set having
capacity 500 GPM against water head
not less than 90 mtr, 2900 rpm at
efficiency minimum 70% complete with
motor electric AC 400 volt 50Hz, 3 Ph,
60 HP as spd brand and model Each
830,400.00 8,502.00 8,981.00 4,011.00
including base plate, coupling guard set
(except control panel & switch),
connecting cable with testing/
commissioning/ trial run to the
satisfaction of the Engineer-in-Charge.
(Origin-USA/UK/Italy/Germany).

25-075 Supply & Installation of end section

Vertical discharge direct coupled
Centrifugal pumping set having
capacity 650 GPM against water head
not less than 100 mtr, 2900 rpm at
efficiency not less than 70% complete
with motor electric AC 400 volt 50Hz,
3 Ph, 100 HP as spd brand and model Each
including base plate, coupling guard
953,353.00 8,502.00 8,981.00 4,011.00
set
(except control panel & switch),
connecting cable with testing/
commissioning/ trial run to the
satisfaction of the Engineer-in-Charge.
(Origin-USA/UK/Italy/Germany).

25-076 Supply & Installation of multistage

Jockey pumping set having capacity to
Discharge 15-20 GPM against water
head 100 mtr at efficiency not less than
70% complete with motor electric AC 3
Phase, 3KW, 50Hz, 2900 rpm as spd
brand and model including base plate, Each
388,600.00 4,251.00 8,981.00 1,886.00
coupling guard, connecting cable set
(except control panel & switch),
including testing/commissioning/ trial
run to the satisfaction of the Engineer-
in-Charge. (Qrigin-USA/
UK/Italy/Germany).

474
RESTRICTED
 RESTRICTED
SECTION-25

FIRE FIGHTING, CHLORINE PLANT AND PRESSURISED WATER SUPPLY SYSTEM &
EQUIPMENTS RATES

Rate in Taka
Measuring Testing /
Item no Description of works Unit Materials and labour
Fixing /
Commissioning /
Add to if removal
Installation only / repair
Trial run
25-077 Supply & Installation of auto star delta
control panel box for fire main &
Jockey Pump with MCCB, Busbar
voltmeter, ammeter, auto to manual
change switch, manual on off switch, Each
280,666.84 1,497.00 - 748.00
power isolation circuit for auto set
operation for control of 100 HP motor
pump (Origin-USA/UK/Italy).

475
RESTRICTED
 RESTRICTED
SECTION-26

SUB-SOIL INVESTIGATION WORKS (SOIL TEST) RATES

Item Description Unit Rate in Tk

26-1 Mobilization and De-mobilization of boring

equipment such as drilling pipes drop hammer,
Tripod, pulley, chain, wrench, sample collection
devices of tools & plants, tripod for temporary Per site 13,651.00
camp, other accessories and manpower at work site
as per direction of Engineer-in-Charge.

26-2 Installation of boring equipment at site on dry

ground / and a surface up to a maximum 750 mm
under water and as per direction of the Engineer-in- Per point 1,138.00
Charge.

26-3 Installation of boring equipment at site for depth

water above 750 mm to 3000 mm as per direction
of the Engineer-in-Charge. Per point 2,372.00

26-4 Installation of boring equipment at site for depth of

water above 3000 mm (stagnant water) as per
direction of the Engineer-in-Charge. Per point 4,381.00

26-5 Drilling 100 mm dia bore hole by wash boring

method 0 to 9 meter including the depth for SPT
operation as per direction of the Engineer-in- Per meter 303.00
Charge.

26-6 Drilling 100 mm dia bore hole by wash boring

method exceeding 9 meter to 18 meter including
the depth for SPT operation as per direction of the
Per meter 303.00
Engineer-in-Charge.

26-7 Drilling 100 mm dia bore hole by wash boring

method exceeding 18 meter to 27 meter including
the depth for SPT operation as per direction of the
Per meter 272.00
Engineer-in-Charge.

621
RESTRICTED
 RESTRICTED
SECTION-26

SUB-SOIL INVESTIGATION WORKS (SOIL TEST) RATES

Item Description Unit Rate in Tk

26-8 Drilling 100 mm dia bore hole by wash boring

method exceeding 27 meter to 36 meter including
the depth for SPT operation as per direction of the Per meter 291.00
Engineer-in-Charge.

26-9 Drilling 100 mm dia bore hole by wash boring

method exceeding 36 meter to 45 meter including
the depth for SPT operation as per direction of the Per meter 303.00
Engineer-in-Charge.

26-10 Execution of SPT (ASTM D-1586-84, hammer :

(140 + 2 Lbs)/ 63.5 + 1 Kg), height of fall : (760
mm + 25 mm) including withdrawn of drilling pipe
from the bore-hole and fixing the steel cap with
drilling pipe and replacing the drilling pipe with Per point 135.00
cap into the bore hole upto the layer of interest and
as per direction of Engineer-in-Charge. For 0 to 9
meter boring.

26-11 - Ditto - exceeding 9 meter to 18 meter boring. Per point 99.00

26-12 - Ditto - exceeding 18 meter to 27 meter boring. Per point 59.00

26-13 - Ditto - exceeding 27 meter to 36 meter boring. Per point 81.00

26-14 - Ditto - exceeding 36 meter to 45 meter boring. Per point 88.00

26-15 Collection of undisturbed soil samples in 75 mm
tubes from cohesive layer incl preservation, and
transportation and as per direction of Engineer-in- Per sample 57.00
Charge.

26-16 Collection of disturbed soil samples in 75 mm

tubes from cohesive layer incl preservation, and
transportation and as per direction of Engineer-in- Per sample 29.00
Charge.

622
RESTRICTED
 RESTRICTED
SECTION-26

SUB-SOIL INVESTIGATION WORKS (SOIL TEST) RATES

Item Description Unit Rate in Tk

Carrying out different test on soil samples

collected from the subsoil investigation site.
(Laboratory charges for testing of samples vary
widely among BRTC (BUET), BIT's (now KUET,
RUET, DUET & CUET) HBRI and privately
owned laboratories as under.

26-17 Specific gravity Per test 1,557.00

26-18 Grain size Analysis of soil by sieve and
Hydrometer analysis & Specific gravity test Per test 3,832.00

26-19 Classification of soil for engineering purposes. Per test 359.00

26-20 Linear shrinkage for cohesive soil. Per test 1,197.00

26-21 Shrinkage limit for cohesive soil. Per test 1,078.00

26-22 Atterberg limit test Per test 2,155.00

26-23 Liquid limit for cohesive soil. Per test 1,796.00

26-24 Plastic limit for cohesive soil. Per test 599.00

26-25 Unit weight of soil. Per test 1,437.00

26-26 Void ratio Per test 1,078.00

26-27 Natural moisture contents tests. Per test 598.70

26-28 Organic mater contents. Per test 2,515.00

26-29 Direct Shear test. Per test 3,113.00

26-30 Consolidated drain test. Per test 5,029.00

26-31 Triaxial shear test. Per test 7,544.00

26-32 Un-Confined compression test for cohesive soil. Per test 2,754.00

26-33 Standard proctor test. Per test 4,430.00

26-34 Modified proctor test. Per test 5,029.00

623
RESTRICTED
 RESTRICTED
SECTION-26

SUB-SOIL INVESTIGATION WORKS (SOIL TEST) RATES

Item Description Unit Rate in Tk

26-35 Preparation writing and submission of report on

sub-soil investigation containing all parameters,
bearing capacities, sections through all bore holes
along different axis, on eight sets of data given
Per site 6,107.00
siting references etc. and all complete as per
satisfaction and direction of Engineer-in-Charge.

624
RESTRICTED
 RESTRICTED
SECTION - 27
SCHEDULE OF RATES FOR CONVEYANCE OF MATERIALS

Description of works / Equipments rent / Engineering Rate in

Item Unit
test charge Taka
27-1 Unload of stores of any description from Trucks, Per M ton 230.00
barge, Rly. Wagons & stack the same for counting or
measurement as directed.

27-2 Carrying of stores of any description by any means Per M ton 259.00
from inside or out side bldg for a distance at 1/4 km or
part there of at the destination.

27-3 - Ditto - but for distance exceeding 1/4 km but not Per M ton 287.00
exceeding 1/2 km

27-4 - Ditto - but for distance exceeding 1/2 km but not Per M ton 345.00
exceeding 1 km

27-5 - Ditto - but add to item 27-4 only each additional 1 Per M ton 38.00
km for distance accounted up to 40 km

27-6 - Ditto - but add to item 27-4 only each additional 1 Per M ton 34.00
km for distance accounted above 40 km

27-7 Loading of stores of any description from godown, Per M ton 276.00
barge, Rly. Wagons etc into truck for stacking,
counting and measuring and for carrying the same as
directed.

27-8 Re-filling of cement or similar stores in jute bags if Per bag 41.00
found loose in wagon, barge, godown etc needed at the
time of loading, unloading, carrying & stacking, duly
weighing and sewing, providing new jute bag and sutly
etc by contractor.

27-9 Loading/unloading of stores of any description Per M ton 517.00

from/into coaster, vessel, boat, barge etc and carrying
the same on head load within a distance of 250 metre
and stacking at the Jetty or coaster etc at river port.

625
RESTRICTED
 RESTRICTED
SECTION - 27
27-10 Weighing, counting and measuring of Engineer Stores Per M ton 138.00
of any description during the course of taking delivery
from Rly. Authority, private or Govt. organization,
firm, corporation etc. wherever necessity arises.

626
RESTRICTED
 RESTRICTED
SECTION - 27
T&P RENTS / TEST FEES FOR ANALYSIS

Item Description of works / Equipments rent / Engineering test

Unit
charge Rate in Taka

Following rates are applicable only for Analysis B/R & E/M items of different section

27-11 Truck fare 5 to 10 ton capacity for carrying any types Truck 1,267.00
of materials up to distance up to 0-5 km

27-12 Truck fare 5 to 10 ton capacity for carrying any types Per km 236.00
of materials above 5 km up to distance 10 km

27-13 Truck fare 5 to 10 ton capacity for carrying any types Per km 167.00
of materials above 10 km to 100 km

27-14 Truck fare 5 to 10 ton capacity for carrying any types Per km 126.00
of materials distance over 100 km

27-15 Rent / Hire charges for Mixer machine 0.15/0.20 cu.m Per hour 327.00
capacity
27-16 Rent / Hire charges for Mixer machine 0.20 / .030 Per hour 448.00
cu.m capacity
27-17 Rent / Hire charges for Road roller 4 ton capacity Per hour 379.00

27-18 Rent / Hire charges for Road roller 6 ton capacity Per hour 431.00

27-19 Rent / Hire charges for Road roller 8 ton capacity with Per hour 460.00
fuel
27-20 Rent / Hire charges for Road roller 10/12 ton capacity Per hour 747.00
with fuel
27-21 Rent / Hire charges for power operated tile cutter with Per hour 13.00
cutting tools

27-22 Rent / Hire charges for drilling Rigs / Crane and other Per hour 2,875.00
equipments for deep tube well including fuel cost.

27-23 Rent / Hire charges for road boring equipments with Per hour 374.00
consumables / fuels

27-24 Rent / Hire charges for welding generator / equipments Per hour 253.00
with fuels
27-25 Rent / Hire charges for purging testing equipments Per hour 259.00

27-26 Rent / Hire charges for shuttering etc Per sq.m 167.00

27-27 Rent / Hire charges of scaffolding for painting / Per sq.m 7.00
glazing works.
627
RESTRICTED
 RESTRICTED
SECTION - 27
27-28 Rent / Hire charges of MS pipe prop for Rib beam Each 92.00

27-29 Rent / Hire charges of MS pipe prop Rib slab Each 103.00

628
RESTRICTED
 RESTRICTED
SECTION - 27
T&P RENTS / TEST FEES FOR ANALYSIS
Following rates are applicable only for Analysis B/R & E/M items of different section
Item Description of works / Equipments rent / Engineering test
Unit
charge Rate in Taka

27-30 Rent / Hire charges of MS Pipe (prop) for fair face and Each 86.00
other works

27-31 Rent / Hire charges for fair face steel shuttering for Per sq.m 201.00
Rib slab. (Note Per cu.m work shuttering will be
required 9.30 sq.m)
27-32 Rent / Hire charges for fair face steel shuttering for Per sq.m 262.00
Rib beam. (Note Per cu.m work shuttering will be
required 15.60 sq.m)
27-33 Rent / Hire charges for fair face steel shuttering (Note Per sq.m 431.00
Per cu.m work shuttering will be required 6.67 sq.m)

27-34 Rent / Hire charges for the small tools with cutter used Per hour 69.00
by tradesman
27-35 Rent / Hire charges for hand tools used by labour Per hour 11.00
27-36 Carrying of demolished materials incl loading / cu.m 494.00
unloading 1 km
27-37 Rent / Hire charges for Vibrator Machine Electric) Per hour 57.00

27-38 Rent / Hire charges for Pumping set 1-2 Cusec Per day 944.00
capacity including fuel cost.
27-39 Rent / Hire charges for compactor Per hour 460.00
27-40 Rent / Hire charges for piling rig with consumables / Per hour 1,207.00
fuels
27-41 Rent / Hire charges for the load testing equipments for Per day 8,625.00
pile
27-42 Preparation of test result / insection reort in a standard Each 1,437.00
form (3 copy) for load / soil test

27-43 Specific gravity Per test 1,782.00

27-44 Grain size Analysis of soil by sieve and Hydrometer Per test 4,542.00
analysis & Specific gravity test
27-45 Classification of soil for engineering purposes. Per test 414.00
27-46 Linear shrinkage for cohesive soil. Per test 1,322.00
27-47 Shrinkage limit for cohesive soil. Per test 1,300.00
27-48 Atterberg limit test Per test 2,415.00
27-49 Liquid limit for cohesive soil. Per test 2,012.00
629
RESTRICTED
 RESTRICTED
SECTION - 27
27-50 Plastic limit for cohesive soil. Per test 690.00

630
RESTRICTED
 RESTRICTED
SECTION - 27

Item Description of works / Equipments rent / Engineering test charge

Unit Rate in Taka
27-51 Unit weight of soil. Per test 1,667.00
27-52 Void ratio Per test 1,265.00
27-53 Natural moisture contents tests. Per test 690.00
27-54 Organic matter contents. Per test 3,507.00
27-55 Direct Shear test. Per test 3,680.00
27-56 Consolidated drain test. Per test 5,750.00
27-57 Triaxial shear test. Per test 8,625.00
27-58 Un-Confined compression test for cohesive soil. Per test 3,220.00
27-59 Standard proctor test. Per test 5,175.00
27-60 Modified proctor test. Per test 5,750.00
27-60A Integrity test done by EinC's Lab Per test 1,782.00
27-61 Transformer Oil test Per sample 3,220.00
27-62 Transformer fitness test 100 - 200 KVA, 3 Ph Each 2,185.00
27-63 Transformer fitness test 250 - 500 KVA, 3 Ph Each 2,530.00
27-64 Transformer / Switchgear fitness test over 500 KVA, Each 2,990.00
3Ph
27-65 Transformer fitness test 10 - 75 KVA, Single phase Each 1,380.00
27-66 Rent for scaffolding etc. Sq.m 135.00
27-67 Hire charge for boring rig Day 2,300.00

27-68 Truck fare incl loading and unloading (bothways) up Truck 3,450.00
to 25 km
27-69 Carrying charge for one truck upto 8 km Km 205.00

27-70 Carrying charge for one truck upto 24 km km 136.00

27-71 Rent / hire charge for unusual tools Hour 10.50

27-72 Rent for T & P unusual tools Hour 56.00

27-73 Binding charges Nos 75.00

27-74 Hire charge of tiles cutting machine Nos 100.00

27-75 Truck Fare & Labour charge for carrying 5 M/Ton Truck 105.00

27-76 Hire charge of load testing equipment (Joist, Jacks Nos 7,000.00
and other nec devices incl calibration charges ,
hydraulic fluid etc.
27-77 Hire charge for rig set for working hrs Hour 1,000.00

631
RESTRICTED
RESTRICTED
SECTION - 27

632
RESTRICTED
 RESTRICTED
SECTION-28
FURNITURE RATES

Schedule Description Rate in Taka

Item no Ctg. Teak Shisham Ctg. Jessore
Shilkorai Teak
Each
28-001 M & S "Almirah wardrobe 14,893.00 8,497.00 9,697.00 12,698.00
(single)" Plan No. (F-1/92) /
(FQ-70/68)

28-002 M & S "Almirah Glazed 21,286.00 13,207.00 14,723.00 17,484.00

shutter for crockery and linen"
Plan No. (F-2/92) / (F-116/56)

28-003 M & S "Almirah Library" Plan 26,853.00 16,733.00 18,786.00 23,445.00

No. (F-3/92) / (FQ-11-62)

28-004 M & S "Almirah large with 62,041.00 32,973.00 38,428.00 52,065.00

shelves" Plan No. (F-4/92) / (F-
21/51)

28-005 M & S "Almirah Medium 27,307.00 19,083.00 22,159.00 29,847.00

W/shelves" Plan No. (F-5/92) /
(F-115/51)

28-006 M & S "Almirah Food" Plan 30,270.00 16,468.00 19,058.00 25,534.00

No. (F-6/92)/(F-116/51)

28-007 M & S "Almirah wardrobe. 52,696.00 35,221.00 38,501.00 46,699.00

1/2hx1/2sh for officer" Plan
No. (F-7/92)/(FQ-49/68)

28-008 M & S "Almirah Mess 47,758.00 23,183.00 27,795.00 39,324.00

Utensils" Plan No. (F-8/92)/(F-
25/25)
28-009 M & S "Almirah Wardrobe 46,914.00 28,567.00 32,010.00 40,618.00
Hanging" Plan No. (F-9/92)/(F-
110/50)

28-010 M & S "Box ice" Plan No. (F- 69,184.00 43,600.00 48,401.00 60,404.00
10/92)/(F-24/25)

28-011 M & S "Book shelf open large" 27,617.00 19,201.00 20,780.00 24,729.00
Plan No. (F-11/92)/(F-13/25)

28-012 M & S "Box soiled Linen" Plan 7,243.00 3,999.00 4,608.00 6,130.00
No. (F-12/92)/(FQ-68/68)

633
RESTRICTED
 RESTRICTED
SECTION-28
28-013 M & S "Box Tally Cards" Plan - 4,356.00 4,751.00 -
No. (F-13/92)/(F-101/29)

28-014 M & S "Bed wooden double 30,169.00 22,671.00 24,078.00 27,596.00

with frame MN set of 8" Plan
No. (F-14/92) / (F-17/80)

634
RESTRICTED
 RESTRICTED
SECTION-28
28-015 M & S "Bed wooden single 20,759.00 16,168.00 17,030.00 17,439.00
with frame MN set of 8." Plan
No. (F-15/92)/(F-16/80)

28-016 M & S "Bed wooden Newar 21,395.00 13,576.00 15,043.00 18,712.00

with frame MN set of 8." Plan
No. (F-16/92) / (AF-1/74)

28-017 M & S "Bed Newar" Plan No. 39,619.00 19,252.00 23,074.00 32,630.00
(F-17/92)/(FQ-50/68)

28-018 M & S "Book case library 46,118.00 57,269.00 85,144.00

pattern " Plan No. (F-18/92)/(F-
8/25)
105535
28-019 M & S "Book shelf with G/S 12,533.00 8,662.00 9,388.00 11,205.00
door " Plan No. (F-19/92)/(FQ-
72/68)(M)

28-020 M & S "Book case G/S door " 20,746.00 12,177.00 13,785.00 17,805.00
Plan No. (F-20/92)/(FQ-36/64)

28-021 M & S "Book Shelf small with 33,271.00 16,439.00 19,598.00 27,495.00
glazed single door " Plan No. (F-
21/92) / (F-122/56)

28-022 M & S "Black Board & Easel " 9,237.00 6,605.00 7,099.00 8,334.00
Plan No. (F-22/92)/(FQ-73/68)

28-023 M & S "Board notice " Plan 7,662.00 4,036.00 4,716.00 6,418.00
No. (F-23/92)/(AF-5/74M)

28-024 M & S "Bench workshop" Type - 26,663.00 32,477.00 -

'A' Plan No. (F-24/92)/(FQ-
18/63)

28-025 M & S "Bench workshop" Type - 40,072.00 48,919.00 -

'B' Plan No. (F-25/92)/(FQ-
19/63)

28-026 M & S "Bench workshop" Type - 53,422.00 66,324.00 -

'C' Plan No. (F-26/92)/(FQ-
20/63)

28-027 M & S "Chair Universal" Plan - 3,771.00 4,244.00 -

No. (F-27/92)/(FQ-54/68)(M)

635
RESTRICTED
 RESTRICTED
SECTION-28
28-028 M & S "Chair dining offrs w/o 5,088.00 2,868.00 3,270.00 4,353.00
Arms." Plan No. (F-28/92)/(FQ-
55/68)(M)

636
RESTRICTED
 RESTRICTED
SECTION-28
28-029 M & S "Chair Barrack." Plan - 2,971.00 3,355.00 -
No. (F-29/92)/(F-26/25)

28-030 M & S "Chair officer w/Arms." 7,761.00 4,144.00 4,796.00 6,569.00

Plan No. (F-30/92)/(F-10/80)

28-031 M & S "Chair Cushioned 6,382.00 3,501.00 3,992.00 5,485.00

w/Arms." Plan No. (F-
31/92)/(AF-6/74)

28-032 M & S "Chair School" Plan No. - 2,810.00 3,194.00 4,318.00

(F-32/92)/(F-20/33)

28-033 M & S "Couch foam 20,971.00 14,664.00 15,818.00 18,860.00

cushioned" Plan No. (F-
33/92)/(FQ-57/68)
28-034 M & S "Chair Easy" Plan No. 8,185.00 3,923.00 4,775.00 6,856.00
(F-34/92)/(FQ-52/68)(M)

28-035 M & S "Chair Cane bottom 5,955.00 2,911.00 3,541.00 5,031.00

W/Arms" Plan No. (F-35/92)/(F-
30/49)

28-036 M & S "Chair with Arms (offrs) 6,076.00 3,018.00 3,649.00 5,151.00
" Plan No. (F-36/92)/(FQ-
53/68)(M)

28-037 M & S "Chair foam cushioned " 12,982.00 9,225.00 9,982.00 11,826.00
Plan No. (F-37/92)/(FQ-56/68)

28-038 M & S "Chest of drawers with 19,007.00 14,110.00 15,029.00 17,326.00

Mirror " Plan No. (F-
38/92)/(FQ-69/68)

28-039 M & S "Cup board Barrack " - 8,833.00 10,476.00 14,582.00

Plan No. (F-39/92)/(FQ-10/62)

28-040 M & S "Commode wooden " 6,951.00 3,921.00 4,490.00 5,911.00

Plan No. (F-40/92) / (FQ-7/62)

28-041 M & S "Desk School " Plan No. 8,851.00 5,285.00 5,954.00 7,627.00
(F-41/92)/(F-20/33)

28-042 M & S "Desk writing officer 21,922.00 16,260.00 17,322.00 19,979.00

"Plan No.(F-42/92)/(F-12/80)

637
RESTRICTED
 RESTRICTED
SECTION-28
28-043 M & S "Desk Instructor " Plan 20,389.00 10,871.00 12,657.00 17,123.00
No. (F-43/92)/(FQ-14/62)

28-044 M & S "Dresser with shelves " 84,997.00 39,551.00 48,079.00 69,400.00
Plan No. (F-44/92)/(HF/232/25)

28-045 M & S "Form w/o back" Plan - 4,133.00 4,179.00 -

No. (F-45/92)/(F-4/80)

28-046 M & S "Form w/o back" Plan - 5,022.00 5,435.00 7,365.00

No. (F-46/92)/(FQ-58/68)

28-047 M & S "Form w/o back" Plan - 4,574.00 5,022.00 6,796.00

No. (F-47/92)/(FQ-4/62)

28-048 M & S "Foot Board" Plan No. - 1,542.00 1,636.00 2,034.00

(F-48/92)/(F-32/49)

28-049 M & S "Hot Case Large " Plan 40,083.00 22,486.00 25,788.00 34,044.00
No. (F-49/92)/(F- 44/25)

28-050 M & S "Hot case Small " Plan 35,882.00 22,416.00 24,943.00 31,261.00
No. (F-50/92) / (F-44/25)

28-051 M & S "Ladder step (3.66 Mtr) - 10,178.00 11,757.00 15,837.00

Plan No. (F-51/92)/(F-27/37)

28-052 M & S "Cot semi double " Plan 25,017.00 18,391.00 19,634.00 22,743.00
No. (F-52/92)

28-053 M & S "Peg set of 3 " Plan No. 986.00 757.00 800.00 907.00
(F-53/92)/(F-111/56)

28-054 M & S "Peg set of 6 " Plan No. 1,732.00 1,227.00 1,322.00 1,558.00
(F-54/92)/(F-111/56)

28-055 M & S "Peg set with Mirror " 3,355.00 2,805.00 2,908.00 2,854.00
Plan No. (F-55/92)/(F-14/80)

28-056 M & S "Peg Table" Plan No. (F- 2,193.00 1,352.00 1,510.00 1,905.00
56/92)/(FQ-62/68)

28-057 M & S "Rack side (office)" 14,021.00 7,579.00 8,788.00 11,810.00

Plan No. (F-57/92)/(FQ-25/64)

638
RESTRICTED
 RESTRICTED
SECTION-28
28-058 M & S "Rack Towel" Plan No. 6,143.00 3,327.00 3,856.00 5,176.00
(F-58/92) / (F-52/60)

28-059 M & S "Rack pegion hole" Plan 70,114.00 32,165.00 39,287.00 57,090.00
No. (F-59/92)/(F-41/28)

28-060 M & S "Rack Map" Plan No. (F- 11,829.00 7,224.00 8,088.00 10,249.00
60/92)/(F-36/27)

28-061 M & S "Safe meat & Milk" - 12,751.00 14,236.00 -

Plan No. (F-61/92)/(AF-4/74)

28-062 M & S "Side Board" Plan No. 3,374.00 2,532.00 2,690.00 3,208.00
(F-62/92)/(FQ-62/68)

28-063 M & S "Side Board" Plan No. 36,833.00 18,930.00 22,289.00 30,689.00
(F-63/92)/(FQ-59/68(M)

28-064 Sofa (Foam cushioned) set, 60,839.00 40,870.00 44,617.00 53,985.00

(consist of one couch-3 seater,
two chair, two side table & one
centre table" Plan No. (F-
64/92) (F-20/80)

28-064(a) M & S " Chair Sofa (Foam 11,114.00 7,747.00 8,379.00 9,958.00
cushioned) " Plan No. (F-
64/92) / (F-20/80).

28-064(b) M & S " 1x couch sofa 3 23,140.00 16,606.00 17,832.00 20,897.00

seater(Foam cushioned)" Plan
No. (F-64/92) / (F-20/80)

28-064© M & S "Side table" Plan No. (F- 3,706.00 2,192.00 2,476.00 3,187.00
64/92) / (F-20/80)

28-064(d) M & S "1x Table Centre" Plan 8,059.00 4,386.00 5,075.00 6,798.00
No. (F-64/92) / (F-20/80)

28-065 M & S "Stool 1'-6" high " Plan 3,763.00 2,309.00 2,570.00 3,234.00
No. (F-65/92) / (FQ-23/63)

28-066 M & S "Stool Typist" Plan No. 3,907.00 2,361.00 2,651.00 3,377.00
(F-66/92) / (F-104/40) (M)

639
RESTRICTED
 RESTRICTED
SECTION-28
28-067 M & S "Couch upholstered" 32,681.00 24,112.00 25,721.00 29,741.00
Plan No. (F-67/92)/(F-90/56)

28-068 M & S "Chair upholstered" 17,466.00 13,487.00 14,234.00 16,100.00

Plan No. (F-68/92)/(F-108/56)

28-069 M & S "Stool 2'-0" high" Plan 4,046.00 2,532.00 2,816.00 3,527.00
No. (F-69/92)/(F-2/25)

28-070 M & S "Stand Hall" Plan No. 16,532.00 8,881.00 10,317.00 13,906.00
(F-70/92)/(F-77/25)

28-071 M & S "Table Offrs (Medium)" 17,235.00 12,950.00 13,754.00 15,764.00

Plan No. (F-71/92)/(FQ-66/68)

28-072 M & S "Table Bed side 6,827.00 4,302.00 4,776.00 5,961.00

Officer" Plan No. (F-
72/92)/(FQ-51/68)(M)

28-073 M & S "Table Pedestal writing 24,515.00 15,257.00 16,994.00 21,337.00

" Plan No. (F-73/92)/(F-12/56)

28-074 M & S "Table Pedestal writing 23,847.00 16,226.00 17,656.00 21,231.00

" Plan No. (F-74/92)/(FQ-
6/62)(M)
28-075 M & S "Table Writing small " 11,781.00 7,451.00 8,264.00 10,295.00
Plan No. (F-75/92)/(F-67/25)

28-076 M & S "Table Writing officer 12,585.00 8,269.00 9,079.00 11,104.00

small " Plan No. (F-76/92)/(FQ-
71/68)

28-077 M & S "Table Clerical " Plan - 8,414.00 9,034.00 -

No. (F-77/92)/(FQ-65/68)(M)

28-078 M & S "Table Typist " Plan - 6,339.00 7,229.00 -

No. (F-78/92)/(FQ-104/40)(M)

28-079 M & S "Table Draftsman " 88,955.00 41,825.00 50,670.00 72,781.00

Plan No. (F-79/92)/(F-65/28)

28-080 M & S "Table Centre " Plan 7,752.00 4,079.00 4,768.00 6,491.00
No. (F-80/92)/(FQ-61/68)(M)

28-081 M & S "Table Bed side " Plan 7,245.00 4,047.00 4,647.00 6,148.00
No. (F-81/92)/(F-66/56)

640
RESTRICTED
 RESTRICTED
SECTION-28
28-082 M & S "Table 6'-0"x3'-6"Plan 31,780.00 14,948.00 18,107.00 26,003.00
No. (F-82/92)/(F-37/25)

28-083 M & S "Table dining "Plan No. 40,751.00 19,634.00 23,597.00 33,504.00
(F-83/92)/(F-99/56)

28-084 M & S "Table dining 9,693.00 6,327.00 6,959.00 6,977.00

JCO's/OR's "Plan No. (F-84/92)
/ (FQ-63/68)(M)

28-085 M & S "Table (5'-0"x2'-10") 21,951.00 11,178.00 13,200.00 18,254.00

"Plan No. (F-85/92)/(F1/56)

28-086 M & S "Table dressing Ladies 18,507.00 11,269.00 12,627.00 16,023.00

W/M & Stool "Plan No. (F-
86/92)/(FQ-67/68)

28-087 M & S "Table dressing Ladies 14,566.00 10,282.00 11,086.00 13,096.00

W/M & Stool "Plan No. (F-
87/92)/(FQ-23/80)

28-088 M & S Table dressing 15,349.00 7,958.00 9,345.00 12,710.00

W/Mirror 'A' Plan No. (F-
88/92)/(FQ-33/64)
28-089 M & S "Table 3'x3' " Plan No. 11,606.00 6,051.00 7,094.00 9,699.00
(F-89/92)/(AF-3/74)(M)

28-090 M & S "Table Tea low round " 5,279.00 3,259.00 3,638.00 4,585.00
Plan No. (F-90/92)/(F-106/99)

28-091 M & S "Table Card " Plan No. 11,236.00 6,018.00 6,997.00 9,445.00
(F-91/92)/(F-79/24)

28-092 M & S "Table Dining Officer " 16,039.00 10,821.00 11,800.00 14,248.00
Plan No. (F-92/92)/ (FQ-
64/68)(M)

28-093 M & S "Table Cook house large - 8,925.00 9,737.00 -

" Plan No. (F-93/92)/ (F-3/39)

28-094 M & S "Table Cook house - 7,698.00 8,194.00 -

small " Plan No. (F-94/92)/ (F-
3/39)
28-095 M & S "Teapoy " Plan No. (F- 5,325.00 3,244.00 3,635.00 4,611.00
95/92)/ (FQ-60/68)

641
RESTRICTED
 RESTRICTED
SECTION-28
28-096 M & S "Table hall " Plan No. 11,548.00 6,330.00 7,309.00 9,757.00
(F-96/92)/ (AF-86/24)

28-097 M & S "Trestle store room " - 10,797.00 13,221.00 -

(Wooden) Plan No. (F-97/92)/
(F-9/62)

642
RESTRICTED
 RESTRICTED
SECTION-28
28-098 M & S "Almirah Map" Plan 70,498.00 34,080.00 40,914.00 58,000.00
No. (F-98/92)/ (F-22/26)

28-099 M & S "Wall Board 10,077.00 5,792.00 6,596.00 8,606.00

2400x1200mm (8'x4')" Plan
No. (F-99/92)/ (F-13/80)

28-100 M & S "Wall Board 5,926.00 4,503.00 4,770.00 5,438.00

1200x1200mm " Plan No. (F-
100/92)/ (F-13/80)
Rate in Tk
28-101 M & S "Almirah Steel large - 17,382.00 - -
with shelves" Plan No. (F-
101/92)/ (F-9/80)

28-102 M & S "Almirah Steel with - 14,973.00 - -

shelves (Medium)" Plan No. (F-
102/92)/ (F-6/80)

28-103 M & S "Almirah wardrobe - 21,454.00 - -

Steel .5hx.5sh" Plan No. (F-
103/92)/ (F-15/80)

28-104 M & S "Chowki sleeping - 12,569.00 - with poles

single" Plan No. (F-104/92) / (F- MN set
1/80)(R)
28-105 M & S "Charpoy I/P 38 mm - 11,822.00 - with poles
(1.5") dia " Plan No. (F-105/92) MN set
/ (F-27/83)

28-106 M & S "Charpoy I/P double - 25,241.00 - -

Decker with , newar & MNS of
4 " Plan No. (F-106/92) / (F-
1/90)
28-107 M & S "Double Tier steel kit - 15,389.00 - -
locker .5hx.5sh " Plan No. (F-
107/92)/ (F-3/80)

28-108 M & S "Receptacle large" Plan - 4,418.00 - -

No. (F-108/92)/ (F-47/35)

28-109 M & S "Receptacle small" Plan - 2,929.00 - -

No. (F-109/92)/ (F-47/35)

28-110 M & S "Mattress coir single - 6,676.00 - -

(2.133 mx1.066mx.101m)"
Plan No. (F-110/92)

643
RESTRICTED
 RESTRICTED
SECTION-28
28-111 M & S "Mattress coir double - 8,500.00 - -
(2.133 mx1.52mx.101m)" Plan
No. (F-111/92)

28-112 File Cabinet steel ( F-1/2002) - 17,314.00 - -

644
RESTRICTED
 RESTRICTED
SECTION-28
28-113 Rack steel with Wooden - 24,300.00 - -
Shelves (Shisham) ( F-2/2002)

28-114 Rack steel with Wooden - - 24,243.00 -

Shelves (Silkorai-Ctg.) (F-
2/2002)

28-115 Rack Wooden three Shelves - 30,327.00 - -

(Shisham) 2400mm x 500mm x
1500 mm (F-3/2002)

28-116 Rack Wooden three Shelves - - 30,327.00 -

(Shilkorai-ctg.) 2400mm x
500mm x 1500 mm (F-3/2002)

28-117 Rack Wooden three Shelves - 35,471.00 - -

(Shisham) 2400mm x 600mm x
1800 mm (F-4/2002)

28-118 Rack Wooden three Shelves - - 35,458.00 -

(Shilkorai-ctg.) 2400mm x
600mm x 1800 mm (F-4/2002)

28-119 Rack Rifle (Shisham) 2100mm - 18,830.00 - -

x 400mm (F-5/2002)

28-120 Rack Rifle (Shilkorai-ctg.) - - 18,830.00 -

2100mm x 400mm (F-5/2002)

28-121 Rack Rifle (Shisham) 2100mm - 27,219.00 - -

x 700mm (F-6/2002)

28-122 Rack Rifle (Shilkorai - ctg.) - - 27,207.00 -

2100mm x 700mm (F-6/2002)

28-123 Stand Hall Plan No- B-01/99 ######## - - 19,399.00

28-124 Chair Sofa single seater Plan ######## - - 23,079.00

No- B-02/99

28-125 Chair Sofa Two seater Plan No- ######## - - 33,255.00

B-03/99

28-126 Chair Sofa Three seater Plan ######## - - 42,301.00

No- B-04/99

645
RESTRICTED
 RESTRICTED
SECTION-28
28-127 Table Center Plan No- B-05/99 ######## - - 9,372.00

28-128 Table Side Plan No- B-06/99 6,442.00 - - 5,811.00

646
RESTRICTED
 RESTRICTED
SECTION-28
28-129 Table Corner Plan No- B-07/99 ######## - - 16,935.00

28-130 Book Shelf Large GSD Plan No- ######## - - 75,992.00

B-08/99

28-131 Chair Dining Plan No- B-09/99 ######## - - 10,851.00

28-132 Table Dining Plan No- B-10/99 ######## - - 27,574.00

28-133 Dinner Wagon Plan No- B- ######## - - 75,758.00

11/99
28-134 Serving Trolley Plan No- B- ######## - - 16,183.00
12/99
28-135 Box Type Bed Double Plan No- - - 90,679.00
B-13/99
101812
28-136 Box Type Bed Semi Double ######## - - 72,983.00
Plan No- B-14/99

28-137 Chair Officers with arms Plan ######## - - 12,681.00

No- B-15/99
28-138 Table Writing Plan No- B- ######## - - 24,325.00
16/99
28-139 Table For TV Plan No- B-17/99 ######## - - 20,834.00

28-140 Table Telephone Plan No- B- ######## - - 11,613.00

18/99
28-141 Peg Set of Three Plan No- B- 2,686.00 - - 2,423.00
19/99
28-142 Table Dressing W/Stool Plan ######## - - 30,021.00
No- BCDE-20/99

28-143 Chest of Drawer Cum ######## - - 40,308.00

Wardrobe Plan No- BCDE-
21/99
28-144 Chair Easy Plan No- BCDE- ######## - - 10,291.00
22/99
28-145 Rack Towel Plan No- BCDE- ######## - - 11,115.00
23/99

647
RESTRICTED
 RESTRICTED
SECTION-28
28-146 Box Soiled Linen Plan No- ######## - - 11,074.00
BCDE-24/99

28-147 Rack Boot Plan No- BCDE- ######## - - 14,899.00

25/99

28-148 Poles M N set of 4 (See - 562.00 -

Analysis item 28-105)

28-149 Stand hall Plan No- C-27/99 ######## - - 12,915.00

28-150 Almirah Steel Plan No- C- - 17,614.00 - -

28/99 (See Sl. No. 103)

28-151 Almirah Food Plan No- C- ######## - - 26,183.00

29/99

28-152 Side Board Plan No- CD-30/99 ######## - - 33,944.00

28-153 Tea poy Plan No- CD-31/99 7,078.00 - - 6,080.00

28-154 Chair Sofa Three Seater Plan ######## - - 42,375.00

No- CDE-32/99

28-155 Chair Dining Plan No- CDE- 7,755.00 - - 6,705.00

33/99

28-156 Table Dining Plan No- CDE- ######## - - 20,953.00

34/99

28-157 Chair Universal Plan No- CDE- 8,162.00 - - 6,954.00

35/99

28-158 Bed Wooden Double Plan No- ######## - - 50,308.00

CDE-36/99

28-159 Bed Wooden Single Plan No- ######## - - 34,949.00

CDE-37/99

28-160 Table Bed Side Officer Plan No- 8,300.00 - - 7,354.00

CDE-38/99

28-161 Chair Sofa Single Seater Plan ######## - - 18,547.00

No- CDES-39/99

648
RESTRICTED
 RESTRICTED
SECTION-28
28-162 Table Centre Plan No- CDES- ######## - - 9,112.00
40/99

649
RESTRICTED
 RESTRICTED
SECTION-28
28-163 Table Side Plan No- CDES- 5,253.00 - - 4,623.00
41/99

28-164 Book Shelf GSD Plan No- ######## - - 32,188.00

CDES-42/99

28-165 Chair Officer W/Arms Plan No- 9,555.00 - - 8,137.00

CDES-43/99

28-166 Table Writing Plan No- CDES- ######## - - 17,395.00

44/99

28-167 Peg Set of Three Plan No- 1,429.00 - - 1,271.00

CDES-45/99

OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no

28-168 M & S Bed steel single (CR Each 14,228.00

pipe) with poles MN set of 4
plan No F-104/92 (M)
Supersedes plan No. 104/92

28-169 M & S Charpoy CR (Cold Each 8,225.00

Rolled) Pipe single with Jute
Newar & Poles MN set of 4
plan No F-105/92(M) review
(Supersedes plan No. 105/92
(M)

28-170 M & S Chair Sofa single seater Each 20,527.00

plan No. B-02/99 (M)
(Supersedes plan No. B-02/99)

28-171 M & S Chair Sofa two seater Each 38,142.00

plan No. B-03/99 (M)
(Supersedes plan No. B-03/99)

28-172 M & S Chair Sofa three seater Each 49,922.00

plan No. B-04/99 (M)
(Supersedes plan No. B-04/99)

650
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-173 M & S Table corner plan No. B- Each 8,458.00
07/99 (M) (Supersedes plan No.
B-07/99)

651
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-174 M & S of Book Shelf large (2 Each 25,784.00
Part), plan No. B-08/99 (M)
(Supersedes plan No. B-08/99)

28-175 M & S of Chair Dining plan Each 15,445.00

No. B-09/99 (M) (Supersedes
plan No. B-09/99)

28-176 M & S Table Dining plan NO. Each 26,037.00

B-10/99 (M) (Supersedes plan
No. B-10/99)

28-177 M & S Dinner Wagon plan No. Each 37,622.00

CD--11/99 (M) (Supersedes
plan No. B-11/99)

28-178 M & S Serving Trolly plan No. Each 12,200.00

B-12/99 (M) (Supersedes plan
No. B-12/99)

28-179 M & S Box type Bed Double Each 47,629.00

with Spring Matttress, plan No.
BC-13/99 (M) (Supersedes plan
No. 13/99)

28-180 M & S Box type Bed semi Each 42,928.00

Double with Spring Matttress,
plan No. BC-14/99 (M)
(Supersedes plan No. 14/99)

28-181 M & S Chair offrs with Arms Each 9,710.00

plan No. B-15/99 (M)
(Supersedes plan No. B-15/99)

28-182 M & S Table writing, plan No. Each 14,308.00

B-16/99 (M-1) (Supersedes
plan No. B-16/99 (M)

652
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-183 M & S Table for TV plan No. B- Each 7,960.00
17/99 (M) (Supersedes plan No.
B-17/99)

28-184 M & S Table Telephone with Each 12,602.00

stool plan No. B-18/99 (M)
(Supersedes plan No. B-18/99)

28-185 M & S Table Dressing with Each 12,144.00

mirror plan No. BCDE-20/99
(M) (Supersedes plan No.
BCDE-20/99)

28-186 M & S Stool for Table dressing Each 7,481.00

plan No. BCDE-20/99 (M)a
(Supersedes plan No. BCDE-
20/99)

28-187 M & S Chest of drawer cum Each 27,375.00

wardrobe plan No. BCDE-
21/99 (M) (Supersedes plan No.
BCDE-21/99)

28-188 M & S Chair Easy with Foam Each 26,024.00

Cushion (Fabric cover) plan
No. B-22/99 (M) (Supersedes
plan No. B-22/99)

28-189 M & S Chair Sofa Three seater Each 40,654.00

plan No. CDE-32/99 (M)
(Supersedes plan No. CDE-
32/99)

28-190 M & S Chair Dining plan No. Each 16,651.00

CDE-33/99 (M) (Supersedes
plan No. CDE-33/99)

28-191 M & S Table Dining plan No. Each 22,337.00

CDE-34/99 (M) (Supersedes
plan No. CDE-34/99)

653
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-192 M & S Box type Bed Double Each 29,886.00
with Foam Mattress plan No.
DE-36/99 (M) (Supersedes plan
No. CDE-36/99)

28-193 M & S Bed Single W/out Each 13,823.00

Mattress plan No. CDES-37/99
(M) (Supersedes plan No.
CDES-37/99)

28-194 M & S Chair Sofa single seater Each 16,953.00

plan No. CDES-39/99 (M)
(Supersedes plan No. CDES-
39/99)

28-195 M & S Book Shelf small with Each 12,536.00

5mm thick glass incl aluminium
chanel plan No. CDES-42/99
(M) (Supersedes plan No.
CDES-42/99)
28-196 M & S Chair Offrs with Arms Each 8,370.00
plan No. CDES-43/99 (M)
(Supersedes plan No. CDES-
43/99)

28-197 M & S Table writing, plan No. Each 11,537.00

CDES-44/99 (M) (Supersedes
plan No. CDES-44/99)

28-198 M & S Bed steel Double (CR Each 18,036.00

pipe) with poles MN set of 4
plan No. F-1/2004

28-199 M & S Chair Plastic W/out Each 787.00

Arms, plan No. F-2/2004
(Supersedes plan No. F-45/92,
F46/92 & F-47/92)

28-200 M & S Chair Easy with Foam Each 10,622.00

Cushion (Rexin cover) plan No.
CDE-03/2004

654
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-201 M & S Table Bed Side Officer Each 5,314.00
Plan No. CDES-38/99 (M)
(Supersedes plan No. CDE-
38/99)

655
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-202 M & S Rack, Boot, Plan No. Each 7,954.00
BCDE-25/99 (M) (Supersedes
BCDE-25/99)

28-203 M & S Table Writing, Plan No. Each 14,662.00

B-16/99 (M) (Supersedes plan
No. B-16/99)

28-204 M & S Table Side, Plan No. B- Each 3,281.00

06/99 (M) (Supersedes pna No.
B-06/99)

28-205 M & S Table Centre, Plan No. Each 5,185.00

B-05/99 (M) (Supersedes plan
No. B-05/99)

28-206 M & S Stand Hall, Plan No. BC- Each 11,356.00

01/99 (M) (Supersedes plan No.
B-01/99)

28-207 M & S Receptacle small Each 999.00

(Plastic) Plan No. F-109/92 (M)
(Supersedes plan No. F-109/92
(F-47/35)

28-208 M & S Receptacle large Each 1,623.00

(Plastic) Plan No. F-108/92 (M)
(Supersedes plan No. F-108/92
(F-47/35)

28-209 M & S Chair Easy (Plastic) Each 1,498.00

Plan No. F-34/92 (M)
(Supersedes plan No. F-34/92)
FQ-52/68 (M)

28-210 M & S Chair Computer, Plan Each 6,592.00

No. BCDE-05/2004

28-211 M & S Table Writing with Each 9,366.00

shelves, Plan No. BCDE-
06/2004.

656
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-212 M & S Table Computer, Plan Each 8,833.00
No. BCDE-04/2004.

657
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-213 M & S curtain for door / Mtr - As required
window for A type Quarter .

28-214 M & S curtain for door / Sqm 626.00 Minium

window for B type Quarter . width of
cloth 1.37
mtr

28-214 (A)M & S curtain for door / Sqm 576.00 Minium

window for C,D, E type width of
Quarter & BOQ . cloth 1.37
mtr

28-214 (B)M & S curtain for door / Sqm 726.00 Minium

window for Officers Mess width of
cloth 1.37
mtr

658
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no

Each

28-215 Almirah clothing linen plan No. 52,992.00

1/2005

28-216 Box letter plan No. 2/2005 2,980.00

28-217 Book shelf display (with all) 19,954.00

plan No. 03/2005

28-218 Bed examination Plan No. 15,290.00

04/2005

28-219 Chair easy Plan No. 05/2005 4,968.00

28-220 Chair dining Plan No. 06/2005 5,796.00

28-221 Chair wheel Plan No. 07/2005 8,694.00

28-222 Chair auditorium Plan No. 6,706.00

08/2005

28-223 Chair reading for student 5,547.00

officer Plan No. 09/2005

28-224 Chair Technical Plan No. 9,985.00

10/2005

28-225 Chair Conference with arms 7,452.00

Plan No. 11/2005

28-226 Chair revolving with arms Plan 11,376.00

No. 12/2005

28-227 Chair counter Plan No. 11,592.00

13/2005

28-228 Chair fibre glass Plan No. 6,723.00

14/2005

28-229 Chair fabric with arms Plan 8,942.00

No. 15/2005

659
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-230 Chair visitors Plan No. 9,936.00
16/2005

28-231 Chair reading / syndicate with 6,607.00

arms Plan No. 17/2005

28-232 Chair cabinet catalogue Plan 17,388.00

No. 18/2005

28-233 Chair dais Plan No. 19/2005 18,209.00

28-234 Chair foot step Plan No. 6,077.00

20/2005

28-235 Chair foot trolley Plan No. 5,464.00

21/2005

28-236 Honour board Plan No. 4,355.00

22/2005

28-237 Key board Plan No. 23/2005 3,370.00

28-238 Rack library Plan No. 24/2005 11,260.00

28-239 Rack magazine Plan No. 21,237.00

25/2005

28-240 Rostrum Plan No. 26/2005 13,181.00

28-241 Stool for laboratory Plan No. 6,262.00

27/2005

28-242 Stool for technician Plan No. 4,140.00

28/2005

Per Set
28-243 Sofa set for VIP Plan No. 139,104.00
29/2005

Each

660
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-244 Table conference Plan No. 136,785.00
30/2005

28-245 Table bed side cup board Plan 5,464.00

No. 31/2005

661
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-246 Table counter Plan No. 47,692.00
32/2005

28-247 Table technician Plan No. 16,477.00

33/2005

28-248 Table full secretariat with side 54,648.00

rack glass top Plan No.
34/2005
28-249 Table secretariat with side rack 36,432.00
Plan No. 35/2005

28-250 Table for D.S Plan No. 8,114.00

36/2005

28-251 Table magazine Plan No. 13,248.00

37/2005

28-252 Table laboratory Plan No. 17,884.00

38/2005

28-253 Table for flower base Plan No. 1,656.00

39/2005

28-254 Table dispensary Plan No. 13,827.00

40/2005

28-255 Table demonstrator Plan No. 33,534.00

41/2005

28-256 Table laboratory with rack 14,076.00

Plan No. 42/2005

28-257 Table executive with attached 29,808.00

side table Plan No. 43/2005

28-258 Table reading Plan No. 9,936.00

44/2005

28-259 Table visitor Plan No. 45/2005 13,248.00

28-260 Table syndicate Plan No. 9,936.00

46/2005

662
RESTRICTED
 RESTRICTED
SECTION-28
OTOBI / NAVANA / PARTEX / HATIL / SIMILAR IN KIND

Schedule
Description of irem Unit Rate in Tk Remarks
Item no
28-261 Table computer Plan No. 9,522.00
47/2005

663
RESTRICTED
 RESTRICTED
SECTION - 29
RATES OF MATERIALS (with carrying) for basis and consideration
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1001 Aica Aibon (Local) kg 241.00

29-1002 - Ditto - but (Japan) kg 368.00

29-1003 Aluminium Sliding lock each 241.00

29-1004 - Ditto - but rubber gasket Japan Made metre 14.00

29-1005 - Ditto - but lock Reliance Japan Made each 270.00

29-1006 - Ditto - but show lock Japan Made each 224.00

29-1007 Aluminium Netting rubber round Japan Made metre 8.00

29-1008 - Ditto - but rubber flat Japan Made metre 29.00

29-1009 - Ditto - but angle metal Japan Made each 86.00

29-1010 - Ditto - but wheel Japan Made each 57.00

29-1011 Aluminium Fixed rubber gasket metre 8.00

29-1012 - Ditto - but double metre 10.00

29-1013 Aluminium Door mohair single metre 20.00

29-1014 - Ditto - but Wheel (Get on) Japan Made each 74.00

29-1015 - Ditto - but Door mohair (Double) Japan Made metre 22.00

29-1016 - Ditto - but Wheel (Matex) Japan Made each 57.00

29-1017 Aluminium 38 mm counter sunk screw Japan Made each 2.00

29-1018 - Ditto - but 50 mm each 3.00

29-1019 Aluminium Flush bolt Japan Made set 391.00

29-1020 Aluminium Nylex cover sq. m 345.00

29-1021 - Ditto - but Paste for Nylex cover sq. m 178.00

29-1022 Aluminium 25x25mm size Aluminium Tee 1.50 mm metre 92.00

29-1023 - Ditto - but 32x25mm size Aluminium Tee 1.50 mm metre 105.00

29-1024 - Ditto - but 25x25x2 mm size Aluminium Angle metre 94.00

29-1025 - Ditto - but 32x25x3 mm size Aluminium Angle metre 224.00

29-1026 Aluminium grove cover 115mmX1.50mm (foreign) any metre 287.00

colour
29-1027 Aluminium curtain rail 19x1.20mmm (foreign) any colour metre 80.00

653
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1028 - Ditto - but 19x1.20mm (Local made) any colour metre 69.00

29-1029 Aluminium sheet 1 mm thick sq. m 759.00

29-1030 Aluminium sheet 3 mm thick sq. m 3,162.00

29-1031 Aluminium standard spandrel anodized natural colour sq. m 1,725.00

29-1032 - Ditto - (Bronze) sq. m 1,725.00

29-1033 Aluminium sliding frame BTA 75 mm die no 2121N metre 322.00

sliding outer top (Silver)
29-1034 - Ditto - (Bronze) metre 345.00

29-1035 - Ditto - (Black) metre 368.00

29-1036 - Ditto - (P/C) metre 345.00

29-1037 - Ditto - die no 2120A sliding outer bottom (Silver) (L) metre 241.00

29-1038 - Ditto - (Bronze) (L) metre 247.00

29-1039 - Ditto - (Black) (L) metre 253.00

29-1040 - Ditto - (P/C) (L) metre 270.00

29-1041 - Ditto - die no 2120 sliding outer bottom (Silver) (H) metre 287.00

29-1042 - Ditto - (Bronze) (H) metre 293.00

29-1043 - Ditto - (Black) (H) metre 304.00

29-1044 - Ditto - (P/C) (H) metre 304.00

29-1045 - Ditto - die no 2122 N sliding outer side (Silver) metre 230.00

29-1046 - Ditto - (Bronze) metre 253.00

29-1047 - Ditto - (Black) metre 253.00

29-1048 - Ditto - (P/C) metre 264.00

29-1049 - Ditto - die no 1440 sliding shutter top (Silver) metre 212.00

29-1050 - Ditto - (Bronze) metre 218.00

29-1051 - Ditto - (Black) metre 224.00

29-1052 - Ditto - (P/C) metre 224.00

29-1053 - Ditto - die no 1441 sliding shutter bottom (Silver) metre 299.00

29-1054 - Ditto - (Bronze) metre 316.00

654
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1055 - Ditto - (Black) metre 316.00

29-1056 - Ditto - (P/C) metre 322.00

29-1057 - Ditto - die no 1443 sliding shutter lock (Silver) metre 276.00

29-1058 - Ditto - (Bronze) metre 287.00

29-1059 - Ditto - (Black) metre 299.00

29-1060 - Ditto - (P/C) metre 299.00

29-1061 - Ditto - die no 2124 sliding shutter inter lock (Silver) metre 287.00

29-1062 - Ditto - (Bronze) metre 299.00

29-1063 - Ditto - (Black) metre 310.00

29-1064 - Ditto - (P/C) metre 327.00

29-1065 - Ditto - die no -9823 fixed top & side 75 mm (silver) metre 356.00

29-1066 - Ditto - (Bronze) metre 402.00

29-1067 - Ditto - (Black) metre 402.00

29-1068 - Ditto - (P/C) metre 402.00

29-1069 - Ditto - die no -9821 fixed bottom75 mm (Silver) metre 304.00

29-1070 - Ditto - (Bronze) metre 327.00

29-1071 - Ditto - (Black) metre 339.00

29-1072 - Ditto - (P/C) metre 333.00

29-1073 - Ditto - die no -9820 fixed bottom cover 75 metre 120.00

mm(Silver)
29-1074 - Ditto - (Bronze) metre 126.00

29-1075 - Ditto - (Black) metre 132.00

29-1076 - Ditto - (P/C) metre 138.00

29-1077 - Ditto - die no -9819 plane cover (Silver) metre 109.00

29-1078 - Ditto - (Bronze) metre 109.00

29-1079 - Ditto - (Black) metre 115.00

29-1080 - Ditto - (P/C) metre 126.00

29-1081 - Ditto - die no -9818 wall frame (Silver) metre 270.00

655
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1082 - Ditto - (Bronze) metre 276.00

29-1083 - Ditto - (Black) metre 299.00

29-1084 - Ditto - (P/C) metre 310.00

29-1085 - Ditto - die no -9822 Grove cover (Silver) metre 172.00

29-1086 - Ditto - (Bronze) metre 189.00

29-1087 - Ditto - (Black) metre 201.00

29-1088 - Ditto - (P/C) metre 201.00

29-1089 Aluminium sliding frame BTA 90-95 mm die no -1437 metre 391.00
outer top (Silver)
29-1090 - Ditto - (Bronze) metre 402.00

29-1091 - Ditto - (Black) metre 431.00

29-1092 - Ditto - (P/C) metre 448.00

29-1093 - Ditto - die no -1438A outer frame (Silver) L metre 309.00

29-1094 - Ditto - (Bronze) L metre 322.00

29-1095 - Ditto - (Black) L metre 339.00

29-1096 - Ditto - (P/C) L metre 356.00

29-1097 - Ditto - die no -1438 outer frame (Silver) H metre 379.00

29-1098 - Ditto - (Bronze) H metre 402.00

29-1099 - Ditto - (Black) H metre 414.00

29-1100 - Ditto - (P/C) H metre 431.00

29-1101 - Ditto -die no -1439 outer side (Silver) metre 304.00

29-1102 - Ditto - (Bronze) metre 310.00

29-1103 - Ditto - (Black) metre 327.00

29-1104 - Ditto - (P/C) metre 345.00

29-1105 - Ditto - die no -1444 Net section (Silver) metre 195.00

29-1106 - Ditto - (Bronze) metre 200.00

29-1107 - Ditto - (Black) metre 212.00

29-1108 - Ditto -(P/C) metre 218.00

656
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1109 - Ditto - die no -1447 Net handle (Silver) metre 161.00

29-1110 - Ditto - (Bronze) metre 161.00

29-1111 - Ditto - (Black) metre 166.00

29-1112 - Ditto - (P/C) metre 166.00

29-1113 - Ditto - die no -6005 fixed side & top 90-95 mm metre 575.00
(Silver)
29-1114 - Ditto - (Bronze) metre 586.00

29-1115 - Ditto - (Black) metre 598.00

29-1116 - Ditto - (P/C) metre 595.00

29-1117 - Ditto - die no -9987 fixed bottom 90-95 mm (Silver) metre 425.00

29-1118 - Ditto - (Bronze) metre 437.00

29-1119 - Ditto - (Black) metre 454.00

29-1120 - Ditto - (P/C) metre 471.00

29-1121 - Ditto - die no -9991 fixed bottom cover 90-95 mm metre 158.00
(Silver)
29-1122 - Ditto - (Bronze) metre 161.00

29-1123 - Ditto - (Black) 1.5 metre 166.00

29-1124 - Ditto - (P/C) metre 178.00

29-1125 - Ditto - die no -9988 grove cover 90-95 mm (Silver) metre 244.00

29-1126 - Ditto - (Bronze) 90-95X150 metre 253.00

29-1127 - Ditto - (Black) metre 264.00

29-1128 - Ditto - (P/C) metre 276.00

29-1129 - Ditto - die no -9989 plane cover (Silver) metre 161.00

29-1130 - Ditto - (Bronze) metre 161.00

29-1131 - Ditto - (Black) metre 172.00

29-1132 - Ditto - (P/C) metre 178.00
29-1133 - Ditto - die no -9998 wall frame (Silver) metre 441.00

29-1134 - Ditto - (Bronze) metre 454.00

29-1135 - Ditto - (Black) metre 471.00

29-1136 - Ditto - (P/C) metre 483.00

657
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1137 Aluminium swing door section BTA die no -9500 door metre 465.00
shutter side (Silver)
29-1138 - Ditto - (Bronze) metre 483.00
29-1139 - Ditto - (Black) metre 494.00
29-1140 - Ditto - (P/C) metre 517.00
29-1141 - Ditto - die no -9498 door shutter top (Silver) metre 460.00
29-1142 - Ditto - (Bronze) metre 477.00
29-1143 - Ditto - (Black) metre 477.00
29-1144 - Ditto - (P/C) metre 506.00
29-1145 - Ditto - die no -9499 door shutter bottom (Silver) metre 563.00
29-1146 - Ditto - (Bronze) metre 575.00
29-1147 - Ditto - (Black) metre 586.00
29-1148 - Ditto - (P/C) metre 603.00
29-1149 - Ditto - die no -9985A door closure section (Silver) metre 396.00

29-1150 - Ditto - (Bronze) metre 448.00

29-1151 - Ditto - (Black) metre 471.00
29-1152 - Ditto - (P/C) metre 529.00
29-1153 - Ditto - die no -9984 door closure cover (Silver) metre 170.00
29-1154 - Ditto - (Bronze) metre 178.00
29-1155 - Ditto - (Black) metre 195.00
29-1156 - Ditto - (P/C) metre 201.00
29-1157 - Ditto - die no -9497 door floor bottom (Silver) metre 465.00
29-1158 - Ditto - (Bronze) metre 488.00
29-1159 - Ditto - (Black) metre 506.00
29-1160 - Ditto - (P/C) metre 518.00
29-1161 - Ditto - die no -9999A door glass bit (Silver) metre 57.00
29-1162 - Ditto - (Bronze) metre 57.00
29-1163 - Ditto - (Black) metre 63.00
29-1164 - Ditto - (P/C) metre 69.00

658
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1165 - Ditto - die no -9456 door handle (Silver) metre 632.00
29-1166 - Ditto - (Bronze) metre 661.00
29-1167 - Ditto - (Black) metre 701.00
29-1168 - Ditto - (P/C) metre 718.00
29-1169 - Ditto - die no -9975 fixed glass protector bit metre 57.00
29-1170 (Silver)
- Ditto -S (Bronze) S metre 63.00
29-1171 - Ditto - (Black) S metre 69.00
29-1172 - Ditto - (P/C) S metre 69.00
29-1173 - Ditto - die no -9976A fixed glass protector bit metre 92.00
(Silver) D
29-1174 - Ditto - (Bronze) D metre 97.00
29-1175 - Ditto - (Black) D metre 97.00
29-1176 - Ditto - (P/C) D metre 105.00
29-1177 - Ditto - die no -4646 door divider (Silver) metre 241.00
29-1178 - Ditto - (Bronze) metre 247.00
29-1179 - Ditto - (Black) metre 299.00
29-1180 - Ditto - (P/C) metre 310.00
29-1181 - Ditto - die no -4646 door wall side (Silver) metre 454.00
29-1182 - Ditto - (Bronze) metre 454.00
29-1183 - Ditto - (Black) metre 465.00
29-1184 - Ditto - (P/C) metre 483.00
29-1185 Thai aluminum double type curtain rail foreign made metre 1,437.00
29-1186 Tarssle stand for curtain foreign made each 1,437.00
29-1187 Aluminium angle size 38 x 25 x 5 mm metre 419.00
29-1188 Asbestos 3.60 m Pair 327.00
29-1189 Ballies 75 to 100 mm dia metre 327.00
29-1190 Sal Ballies 100 to 150 mm dia metre 517.00
29-1191 Bamboo borak 200mm girth, 9 M long each 322.00
29-1192 - Ditto - but 225mm girth, 12 M long each 368.00
29-1193 - Ditto - but 250mm girth, 12 M long each 448.00
29-1194 - Ditto - but 300mm girth, 12 M long each 488.00
29-1195 Bamboo Pin each 1.00
29-1196 Chatai matting single sq. m 46.00
29-1197 - Ditto - but double sq. m 69.00

659
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1198 Bamboo prop 75-100mm dia & 3mm long using 6 times each 109.00
29-1199 Bamboo props 3 M long each 86.00
29-1200 Bamboo Single Mooli (150 mm to 200 mm girth) metre 34.00
29-1201 Barbed wire 12 SWG galvania kg 109.00
29-1202 - Ditto - but 14 SWG kg 126.00
29-1203 C I bend 150 mm bore (MAANCO / NISSAN / SNG / each 1,322.00
NANAKHI)
29-1204 C I door bend 150 mm bore each 1,357.00
29-1205 Bitumen straight run 80/100 kg 69.00
29-1206 -Ditto-but 60/70 kg 74.00
29-1207 PB-4 kg 97.00
29-1208 Tar litre 103.00
29-1209 Blue kg 201.00
29-1210 Boulders upto 100mm (packed measure) cu. m 4,945.00

29-1211 - Ditto - but exc 100mm (packed measure) cu. m 5,175.00

29-1212 Bricks 1st Class / Over burnt size 238mmX113X69mm M. Nos 8,526.00

29-1213 Bricks Ceramic (Mirpur) 10 hole size 238mmX113X69mmM. Nos 20,125.00

29-1214 - Ditto - but 3 hole size 240x162x113 M. Nos 25,300.00

29-1215 Hollow clay block (brick) size 238mmX113X69mm M. Nos 28,175.00

29-1216 Concord tiles special 400x400x25 mm double layer sq. m 1,552.00

29-1217 - Ditto - but 250x250x22 mm double layer sq. m 1,035.00

29-1218 Solid high load bearing and facing bricks (size 237.5 x M. Nos 19,550.00
112.5x68.75)

29-1219 M. CW wall block design-A (size 237.5 x 162.5 x 1125) M. Nos 25,875.00

29-1220 - Ditto - but design-B (size 237.5 x 162.5 x 1125) M. Nos 25,300.00

29-1221 - Ditto - but cut into two piecis (size 118.75 x 162.5 x M. Nos 16,100.00
1125)
29-1222 Facing bricks (Mirpur) size 200x100x50 mm M. Nos 21,275.00

29-1223 - Ditto - but 200x50x50 mm M. Nos 16,100.00

29-1224 - Ditto - but 200x62x25 mm Klinker Red each 35,075.00

660
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1225 - Ditto - but 200x62x25 mm Black Jet each 43,125.00

29-1226 - Ditto - but 200x62x25 mm Beige & Pearl white each 40,250.00

29-1227 - Ditto - but 200x62x25 mm Apricot each 55,200.00

29-1228 Ceramic zali bricks (Mirpur) size 150x100x150 mm M. Nos 37,950.00

29-1229 Hexagonal Ceramics Tiles (Mirpur ) CT-10, size 230 x each 22.00
150 x 80 x 20 mm Klinker red

29-1230 - Ditto - but Black Jet each 40.00

29-1231 - Ditto - but Beige each 28.00

29-1232 - Ditto - but Apricot each 34.00

29-1233 Hexagonal Ceramics Tiles (Mirpur ) CT-12, size each 42.00

300x90x210x20 mm Klinker red

29-1234 - Ditto - but Black Jet each 57.00

29-1235 - Ditto - but Pearl White each 63.00
29-1236 - Ditto - but Apricot each 63.00
29-1237 Fire bricks SK-34 each 115.00

29-1238 - Ditto - but SK-32 each 80.00

29-1239 Fire clay for SK-34 bricks each 34.00

29-1240 - Ditto - but SK-32 bricks each 23.00

29-1241 Over burnt Bricks aggregate 19 mm graded cu. m 3,654.00

29-1242 Over burnt Bricks aggregate 38 / 50 mm graded cu. m 3,565.00

29-1243 Brick screening cu. m 2,242.00

29-1244 Surki (Machine Made) cu. m 2,472.00

29-1245 Brass angle 38x38x6 mm metre 1,840.00

29-1246 - Ditto - but 50x38x6 mm metre 2,357.00

29-1247 - Ditto - but 50x25x6 mm metre 2,070.00

29-1248 Brass sheet 3 mm thick kg 1,092.00

29-1249 Chair Cane natural kg 2,530.00

661
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1250 Cane plastic for chair caining kg 310.00

29-1251 Catechu kg 368.00

29-1252 Cement ordinary Portland (OPC) kg 10.00

29-1253 Cement Portland composite (PCC) kg 9.00

29-1254 Cement White kg 32.00

29-1255 Corrugated colour sheet 26 BG sq. m 920.00

29-1256 CGI Sheet 26 BG kg 155.00

29-1257 - Ditto - but 28 BG kg 143.00

29-1258 Asbestos cement two pieces ridge Pair 667.00

29-1259 Corrugated Transparent fiber sheet (Coloured) sq. m 920.00

29-1260 Security chain (225-300mm long) each 373.00

29-1261 Chain for sofa cover (Jipper) metre 57.00

29-1262 Chalk Powder kg 28.00

29-1263 Chock for door each 20.00

29-1264 Brass coated clips No 150 Pkt 51.00

29-1265 - Ditto - but No 200 Pkt 63.00

29-1266 Clips for MN stand doz 86.00

29-1267 Cleat (wrought iron) doz 201.00

29-1268 - Ditto - but (Brass) doz 517.00

29-1269 - Ditto - but (Steel) each 80.00

29-1270 Belaying Cleat iron each 57.00

29-1271 Belaying Cleat Brass each 115.00

29-1272 Combi closet Foreign made (China, Malaysia, Thailand) each 35,650.00

29-1273 Fabric width not less than 1.52 M metre 632.00

29-1274 Cloth Markin sq. m 23.00

29-1275 Cloth Emery doz 248.00

662
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1276 Cloth Curtain standard width (Best) metre 920.00

29-1277 Cloth Curtain standard width (Normal) metre 690.00

29-1278 Cloth Curtain standard width (Neting) metre 920.00

29-1279 Cloth for foam cover width 1.35 M metre 460.00

29-1280 - Ditto - but Mattress width not less than 1 M metre 345.00

29-1281 Cloth Rexin sq. m 287.00

29-1282 Cloth Black sq. m 92.00

29-1283 Cloth Poplin metre 149.00

29-1284 - Ditto - but Hessian 1.5 metre width metre 74.00

29-1285 - Ditto - but Molmol 1 metre width metre 46.00

29-1286 - Ditto - but Velvet 1.35 metre width metre 747.00

29-1287 Coal steam kg 25.00

29-1288 Coir coconut / Jute rope / sutly kg 69.00

29-1289 Cotton rope kg 195.00

29-1290 Cork sheet 25mm thick sq. m 166.00

29-1291 Cork sheet 19mm thick sq. m 138.00

29-1292 Glass wool 25/30 mm thick sq. m 402.00

29-1293 Glass wool 40/50 mm thick sq. m 534.00

29-1294 Copper sheet 24 gauze kg 1,380.00

29-1295 Cotton for mattress kg 92.00

29-1296 Drum Sheet sq. m 460.00

29-1297 Dursban 20 EC litre 1,207.00

29-1298 Earth brought from private land (Out side Cantt) lead Truck 747.00
upto 100 M
29-1299 Expanded metal 14 SWG kg 109.00

29-1300 Eye Viewer each 184.00

29-1301 Felt for 1 ply sq. m 546.00

663
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1302 - Ditto - but 2 ply sq. m 690.00

29-1303 CI floor trap 100 mm bore each 1,035.00

29-1304 C I floor trap 150 mm bore each 1,523.00

29-1305 Foam cover cloth (cord) width not less than 1 M metre 402.00

29-1306 Foam cover cord (1.52x2.13 M) each 1,380.00

29-1307 - Ditto - but (1.22x2.13 M) each 1,150.00

29-1308 Foam cover normal (1.52x2.13 M) each 1,035.00

29-1309 - Ditto - but (1.22x2.13 M) each 805.00

29-1310 Foam Arco 280, 100 mm thick (1.52x2.13 M) each 6,742.00

29-1311 - Ditto - but 1.22x2.13 M each 5,382.00

29-1312 Foam 100 mm thick sq. m 2,081.00

29-1313 Foam any thickness cu. m 13,800.00

29-1314 Foam any thickness (Jacket / Poly) cu. m 14,950.00

29-1315 Foam Amar 280 size 550x450x75 mm each 426.00

29-1316 - Ditto - but 550x550x100 mm each 695.00

29-1317 Foam Apex 550x550x100 mm each 695.00

29-1318 - Ditto - but 550x450x75 mm each 426.00

29-1319 Foam Arco-280 / Karmo-2001 (550x450x75 mm) each 426.00

29-1320 - Ditto - but (550x550x100 mm) each 695.00

29-1321 Foam Swan 280 size 550x450x75 mm each 425.00

29-1322 - Ditto - but 550x550x100 mm each 695.00

29-1323 Foam Mattress with cover 100 mm thick (Size1.52 x each 11,833.00
2.13 M)
29-1324 Foam Mattress Spring with cover 200 mm thick (1.52 x each 23,575.00
2.13mm)
29-1325 Formica sq. m 402.00
29-1326 Collapsible gate made of standard MS channel & sq. m 3,737.00
19mx5mm thick FI bar
29-1327 Rolling shutter made of 24 BG galvanized plain sheet sq. m 3,277.00

664
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1328 Galvanized Plain Sheet 18 BG sq. m 1,265.00

29-1329 - Ditto - but 20 BG sq. m 977.00

29-1330 - Ditto - but 22 BG sq. m 874.00

29-1331 - Ditto - but 24 BG sq. m 690.00

29-1332 - Ditto - but 26 BG sq. m 506.00

29-1333 MS / Mat plain sheet any thickness kg 115.00

29-1334 Glass sheet 3mm (Local) sq. m 322.00

29-1335 - Ditto but 3mm Frosted (India) sq. m 615.00

29-1336 - Ditto but 5mm (Local) sq. m 768.00

29-1337 - Ditto but 5mm (China/Taiwan) sq. m 776.00

29-1338 - Ditto but 5mm Frosted (India) sq. m 977.00

29-1339 - Ditto but 5mm Frosted China/Taiwan) sq. m 920.00

29-1340 - Ditto but 5mm Tinted (Foreign made) sq. m 1,035.00

29-1341 - Ditto but 6mm Frosted (India) sq. m 1,092.00

29-1342 - Ditto but 6 mm thick Tinted frosted foreign sq. m 1,380.00

29-1343 Glass strip 5mm thick and 19 mm wide metre 20.00

29-1344 - Ditto - but 3mm thick and 19 mm wide metre 15.00

29-1345 Glass 6 mm thick decorative foreign made sq. m 1,506.00

29-1346 Grinding disc / cutter 100 mm dia each 155.00

29-1347 Gum Arabic kg 333.00

29-1348 Gum silicon (foreign) kg 862.00

29-1349 Glue (Master Gum) kg 230.00

29-1350 Hooks and Eyes 15 cm (Iron) doz 165.00

29-1351 - Ditto - but 20 cm (Iron) doz 207.00

29-1352 Hooks and Eyes 15 cm (Brass) doz 828.00

29-1353 - Ditto - but 20 cm (Brass) doz 1,035.00

665
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1354 Hooks and Eyes 10 cm (Iron) each 11.00

29-1355 - Ditto - but 25 cm (Brass) each 115.00

29-1356 - Ditto - but 30 cm (Brass) each 161.00

29-1357 - Ditto - but 45 cm (Brass) each 287.00

29-1358 - Ditto - but 60cm (Brass) each 391.00

29-1359 Heptachlor 40 WP Gram 2.00

29-1360 Iron Strip 225x40x50 mm kg 98.00

29-1361 MS Angle 19x19x3mm kg 80.00

29-1362 - Ditto - but 25x25x3mm kg 80.00

29-1363 - Ditto - but 38x38x3/6mm kg 80.00

29-1364 - Ditto - but 50x50x6mm kg 80.00

29-1365 MS rolled section such as Channel 'Z' bar any size kg 86.00

29-1366 - Ditto - but "Tee" bar any size kg 86.00

29-1367 MS Structure 50x25x2200 mm each 1,840.00

29-1368 - Ditto - but 50x25x1850 mm each 1,610.00

29-1369 - Ditto - but 38x38 mm metre 552.00

29-1370 - Ditto - but 18x18 mm metre 345.00

29-1371 MS Base plate 75 mm dia 5 mm thick each 36.00

29-1372 MS Flat bar any size kg 74.00

29-1373 MS sheet 18-24 BG kg 101.00

29-1374 MS sheet square box 25x25mm with 18 BG sheet metre 103.00

29-1375 MS sheet square box 19x19mm with 18 BG sheet metre 105.00

29-1376 MS Clamp 50 mm (150mm - 300mm long) each 120.00

29-1377 MS Plate any thickness kg 103.00

29-1378 MS Hold Fast kg 109.00

29-1379 - Ditto - but 37.50 mm x 225 mm each 109.00

666
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1380 - Ditto - but 25 mm x 300 mm each 109.00

29-1381 Hoop Iron kg 109.00

29-1382 Iron Wire 28 Gauze 7x7 mesh sq. m 431.00

29-1383 Iron Wire 24 Gauze 4x4 mesh sq. m 333.00

29-1384 Plastic wire net 7x7 mesh sq.m 316.00

29-1385 MS bar round any dia (BDS grade 275, fy=275 MPA) kg 63.00

29-1386 - Ditto - but (BDS grade 350, fy=350 MPA) kg 64.00

29-1387 Tor steel (60 grade, fy=60000 psi) any dia kg 71.00

29-1388 Deformed bar (40 grade, fy=40000 psi) any dia kg 66.00

29-1389 - Ditto - but (60 grade, fy=60000 psi) any dia kg 69.00

29-1389 (A)Ditto but (72.50 grade, fy=72500 psi) any dia kg 70.00

29-1391 Lead white kg 184.00

29-1392 Lead sheet 5 mm thick sq. m 10,407.00

29-1393 - Ditto - but 3 mm thick sq. m 7,935.00

29-1394 Lime unslacked best quality kg 25.00

29-1395 Linoleum sheet for floor sq. m 414.00

29-1396 Lock concealed with one side handle for steel cupboard or Almirah
each 448.00

29-1397 Lock Yale (Bangladesh) 200mm long each 632.00

29-1398 - Ditto - but (Japan / Italy / England) (size 200/250/300mm each

hight) 3,105.00

29-1399 - Ditto - but (China) 200mm long each 1,782.00

29-1400 Lock Rim (Japan) each 1,437.00

29-1401 - Ditto - but (Bangladesh) each 632.00

29-1402 Lock concealed with handle for steel cupboard or each 437.00
Almirah Size 50X50mm
29-1403 Lock Alpha door Japan Made each 1,322.00

29-1404 Lock for Cupboard 5 cm (Iron body) each 69.00

29-1405 - Ditto - but 6.25 cm each 69.00

667
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1406 - Ditto - but 7.5 cm each 138.00

29-1407 - Ditto - but 5 cm (Brass body) each 517.00

29-1408 - Ditto - but 6.25 cm each 575.00

29-1409 - Ditto - but 7.5 cm each 603.00

29-1410 Lock (Desk, Drawer & Flush Cupboard) 75 mm Iron each 115.00

29-1411 - Ditto - but Brass each 287.00

29-1412 Lock for Almirah Steel each 287.00

29-1413 Lock for drawer Brass each 172.00

29-1414 Lock for File Cabinet each 402.00

29-1415 Lock with handle for Almirah Steel set 460.00

29-1416 Lock & Key with handle foreign made each 805.00

29-1417 Lock English for steel Almirah each 402.00

29-1418 Lowdown cistern Plastic with fitting (foreign origin) each 2,300.00

29-1419 Manhole cover CI special type inner dia 550 mm outer each 7,130.00
dia 800 mm and 100 mm depth with ring (MAANCO /
NISSAN / SNG / NANAKHI)
29-1420 Handle bow 150 mm (Iron) doz 109.00

29-1421 - Ditto - but 150 mm (Brass) doz 517.00

29-1422 - Ditto - but 250 mm (Brass) doz 1,092.00

29-1423 Handle bow (fancy brass) 130 mm each 322.00

29-1424 - Ditto - but 100 mm each 103.00

29-1425 - Ditto - but 250 mm foreign made each 1,380.00

29-1426 Casement Stays quadrant for fan light 175 mm long Iron each 69.00

29-1427 - Ditto - but 250 mm dia Iron each 98.00

29-1428 - Ditto - but 300 mm long Iron each 126.00

29-1429 - Ditto - but 175 mm long Brass each 172.00

29-1430 - Ditto - but 250 mm long Brass each 212.00

668
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1431 - Ditto - but 300 mm long Brass each 224.00

29-1432 Diamond door closer Japan each 3,650.00

29-1433 Iron Handle for steel window each 115.00

29-1434 Handle drawers 75 mm grip brass doz 1,012.00

29-1435 Handle for drawer 100 mm (Brass) each 287.00

29-1436 - Ditto - but 125 mm (Brass) each 299.00

29-1437 - Ditto - but 150 mm (Brass) each 316.00

29-1438 Handle for Almirah steel each 172.00

29-1439 Handle for gate steel each 207.00

29-1440 Flush pattern handles 7.5 cm grip brass doz 1,552.00

29-1441 19mm wide1400 mm long brass hinges sq. m 1,150.00

29-1442 Pintol hinges for steel Almirah each 172.00

29-1443 Hinges (Iron) 5.00 cm doz 138.00

29-1444 - Ditto - but 7.5 cm doz 207.00

29-1445 - Ditto - but 10.00 cm doz 276.00

29-1446 - Ditto - but (Brass) 5.00 cm doz 552.00

29-1447 - Ditto - but 7.5 cm doz 1,035.00

29-1448 - Ditto - but 10.00 cm doz 2,070.00

29-1449 - Ditto - but 12.50cm doz 2,760.00

29-1450 Hinges steel round 75mm long made of 9.53mm dia bar each 29.00

29-1451 Hinges roller round 75 mm long 9.53 mm dia each 35.00

29-1452 Hings clamp (Male / Female) each 63.00

29-1453 Roller with cleat for cupboard each 172.00

29-1454 C-Clamps 62.5x25 mm each 34.00

29-1455 Hinges spring iron (Double action) 10 cm long set 517.00

29-1456 - Ditto - but 12.50 cm long set 690.00

669
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1457 - Ditto - but 15 cm long set 943.00

29-1458 - Ditto - but 10 cm long (Brass) set 1,322.00

29-1459 - Ditto - but 12.50 cm long (Brass) set 1,725.00

29-1460 - Ditto - but 15 cm long (Brass) set 2,127.00

29-1461 Hinges spring iron (Single action) 10 cm long set 402.00

29-1462 - Ditto - but 12.50 cm long set 575.00

29-1463 - Ditto - but 15 cm long set 644.00

29-1464 - Ditto - but 10 cm long (Brass) set 1,380.00

29-1465 - Ditto - but 12.50 cm long (Brass) set 1,472.00

29-1466 - Ditto - but 15 cm long (Brass) set 1,782.00

29-1467 Knob for cup board 31,5 mm (Iron) doz 345.00

29-1468 - Ditto but (Brass) doz 2,530.00

29-1469 Knob Brass 3.75 cm each 2,875.00

29-1470 - Ditto - but 5.00 cm each 287.00

29-1471 - Ditto - but 6.25 cm each 310.00

29-1472 Knob for drawer Brass each 51.00

29-1473 - Ditto - but Steel each 28.00

29-1474 - Ditto - but Receptacle each 115.00

29-1475 Pin lid corner for receptacle each 34.00

29-1476 Brass handles for steel windows 15.0 cm doz 1,380.00

29-1477 Channel for file cabinet's drawer 30 cm long each 368.00

29-1478 Channel for file cabinet's drawer 45 cm long each 414.00

29-1479 F.I Bar handles for Steel windows doz 517.00

29-1480 Brass handles for steel windows doz 1,207.00

29-1481 Steel window handle each 63.00

29-1482 Looking mirror (size 450x1350 mm) 4mm thick each 1,092.00

670
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1483 Mirror (1.05x0.400) 5mm thick sq. m 1,362.00

29-1484 Mirror 5 mm thick foreign sq. m 1,495.00

29-1485 Frame glass door 1200x400x4mm size each 1,150.00

29-1486 Special type mirror cabinet size 600 x 500 x 300 mm each 9,775.00
foreign made

29-1487 Molasses kg 57.00

29-1488 Mosaic top 25 mm thick sq. m 2,242.00

29-1489 Sliding bolt Iron 15 mm dia 25 cm long each 143.00

29-1490 - Ditto but 30 cm long each 172.00

29-1491 - Ditto but 45 cm long each 316.00

29-1492 - Ditto but brass 25 cm long each 437.00

29-1493 - Ditto but 30 cm long each 460.00

29-1494 - Ditto but steel 30cm long made of 15.87mm dia bar each 184.00

29-1495 Hasps & staples steel over 15 cm each 63.00

29-1496 - Ditto - but 10 cm to 15 cm each 51.00

29-1497 - Ditto - but 7.5 cm each 28.00

29-1498 - Ditto - but 5 cm each 17.00

29-1499 - Ditto - but 3.75 cm each 11.00

29-1500 Haps and staple 50 mm doz 138.00

29-1501 - Ditto - but 75 mm doz 207.00

29-1502 Adjustable stay / stopper for steel window made of 19 doz 299.00
mm x 3mm FI bar
29-1503 - Ditto but Brass doz 1,840.00

29-1504 Hook for Peg set large each 69.00

29-1505 - Ditto - but small each 57.00

29-1506 Head Cap 50 mm each 40.00

29-1507 Stay hook brass 30 cm long doz 1,092.00

671
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1508 - Ditto - but Iron 30 cm long doz 172.00
29-1509 Hooks Brass 17 cm or over doz 1,322.00

29-1510 Tower bolt (iron) 50 mm doz 124.00

29-1511 - Ditto - but 75 mm doz 165.00

29-1512 - Ditto - but 100 mm doz 207.00

29-1513 - Ditto - but 150 mm doz 276.00

29-1514 - Ditto - but 200 mm doz 345.00

29-1515 Tower bolt steel 200 mm long made of 9.53mm dia bar doz 276.00

29-1516 - Ditto - but 150 mm long made of 9.53mm dia bar doz 241.00

29-1517 Tower bolt (Brass bright sheet) 375 mm doz 3,450.00

29-1518 Tower bolt brass 75 mm doz 851.00

29-1519 - Ditto - but 100 mm doz 920.00

29-1520 - Ditto - but 150 mm doz 1,242.00

29-1521 - Ditto - but 200 mm doz 2,070.00

29-1522 - Ditto - but 50 mm doz 690.00

29-1523 SS Tower bolts 150mm light doz 1,242.00

29-1524 SS Tower bolts 150mm heavy doz 2,070.00

29-1525 SS Tower bolts 200mm light doz 2,012.00

29-1526 SS Tower bolts 200mm heavy doz 4,140.00

29-1527 Nails iron kg 109.00

29-1528 Nails brass kg 920.00

29-1529 Net plastic wire gauge mosquito proofing 7x7 mesh sq. m 322.00

29-1530 - Ditto - but 9x9 mesh sq. m 368.00

29-1531 Net galvanized iron wire 14 SWG 50 mm Mesh sq. m 201.00

29-1532 - Ditto - but 38 mm Mesh sq. m 230.00

29-1533 - Ditto - but 25 mm Mesh sq. m 253.00

672
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1534 - Ditto - but 19 mm Mesh sq. m 287.00

29-1535 Net galvanized wire 16 SWG 50 mm mesh sq. m 155.00

29-1536 - Ditto - but 37 mm mesh sq. m 166.00

29-1537 - Ditto - but 25 mm mesh sq. m 172.00

29-1538 - Ditto - but 19 mm mesh sq. m 189.00

29-1539 Net galvanized wire 18 SWG, 12.5 mm mesh sq. m 138.00

29-1540 - Ditto - but 20 SWG 12.5 mm mesh sq. m 115.00

29-1541 - Ditto - but 22 SWG 12.5 mm mesh sq. m 112.00

29-1542 Net gauges woven wire mosquito 18x18 mesh sq. m 241.00

29-1543 Net aluminium wire mosquito proof sq. m 322.00

29-1544 Newar cotton 50 mm wide metre 23.00

29-1545 Newar jute 50 mm wide metre 6.00

29-1546 Oil Turpentine / foam oil litre 155.00

29-1547 Oil Linseed litre 224.00

29-1548 Oil Crude litre 51.00

29-1549 Oil Creosote litre 46.00

29-1550 Oil Varnish litre 218.00

29-1551 Oxalic acid kg 207.00

29-1552 Diesel / Kerosene litre 74.00

29-1553 Mobil litre 442.00

29-1554 Grease kg 402.00

29-1555 Chemical for burning paint kg 1,023.00

29-1556 Distemper Berger Robbialac litre 155.00

29-1557 - Ditto - but Elite / Aqua / Berjer litre 126.00

29-1558 - Ditto - but Imperial, Navana/ Berjer litre 135.00

29-1559 Paint Plastic Berger Robbialac litre 282.00

673
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1560 - Ditto - but Elite / Aqua litre 270.00

29-1561 - Ditto - but Imperial, Navana/ Berjer litre 258.00

29-1562 Paint Synthetic Enamel Berger Robbialac litre 322.00

29-1563 - Ditto - but Elite / Aqua/ Berjer litre 304.00

29-1564 - Ditto - but Imperial, Navana/ Berjer litre 287.00

29-1565 Paint Ready Mixed litre 155.00

29-1566 Paint Red oxide litre 322.00

29-1567 Paint blue / yellow / marine yellow oxide litre 287.00

29-1568 Paint Aluminium Berger Robbialac litre 287.00

29-1569 - Ditto - but Elite / Aqua/ Berjer litre 281.00

29-1570 - Ditto - but Imperial, Navana/ Berjer litre 276.00

29-1571 Paint Road Marking Berger Robbialac litre 690.00

29-1572 - Ditto - but Elite / Aqua/ Berjer litre 672.00

29-1573 Snowcem Berger Robbialac kg 109.00

29-1574 - Ditto - but Thailand kg 103.00

29-1575 - Ditto - but England kg 115.00

29-1576 Paint Hammer litre 333.00

29-1577 Paint Weather coat / Acrylic paint Berger Robbialac litre 322.00

29-1578 - Ditto - Elite / Navana / Aqua/ Berjer litre 310.00

29-1579 Textured / Tartaruga paint (Bone tile paint) Berger litre 437.00
Robbialac
29-1580 Paint Tennis court (Berger Robbialac / Elite / Aqua) litre 511.00

29-1581 Paint / Primer for Tennis court (Berjer) litre 540.00

29-1582 Brush 25 mm for painting works each 57.00

29-1583 - Ditto - but 50 mm each 74.00

29-1584 - Ditto - but 75 mm each 115.00

674
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1585 Coconut subra for pile cap cushion kg 23.00

29-1586 M.S Pipe 12 mm (light) 1.8mm thick metre 115.00

29-1587 - Ditto - but 25 mm (light) 1.20mm thick metre 230.00

29-1588 - Ditto - but 36 mm heavy) 1.50mm thick metre 345.00

29-1589 - Ditto - but 38 mm (light) 1.50mm thick metre 322.00

29-1590 - Ditto - but 150 mm (light) 3.40mm thick metre 2,300.00

29-1591 Brass pipe heavy type 25 mm dia metre 782.00

29-1592 - Ditto - but 19 mm dia metre 632.00

29-1593 Tubing GI Other than NTL (Gold) 12.50 mm dia metre 150.00

29-1594 - Ditto - but (Gold) 18.70 mm dia metre 198.00

29-1595 - Ditto - but (Gold) 25 mm dia metre 282.00

29-1596 - Ditto - but (Gold) 37.50 mm dia metre 471.00

29-1597 - Ditto - but (Gold) 50 mm dia metre 588.00

29-1598 Ditto-but (Gold) 75 mm dia metre 943.00

29-1599 Ditto - but (Gold) 100 mm dia metre 1,641.00

29-1600 MS Leg Stoper 25 mm each 40.00

29-1601 MS Leg stopper 75 mm dia each 120.00

29-1602 C R pipe 16 mm (5/8") dia. metre 86.00

29-1603 - Ditto - 19 mm (3/4") dia. metre 97.00

29-1604 - Ditto - 22 mm (7/8") dia. metre 115.00

29-1605 - Ditto - 25 mm (1") dia. metre 138.00

29-1606 - Ditto - 38 mm (11/2") dia. metre 201.00

29-1607 - Ditto - 50 mm (2") dia. metre 258.00

29-1608 MS rectangular box 25x25x25 mm each 207.00

29-1609 Rectangular connector 50x25 mm each 57.00

29-1610 Metal connector 8 mm each 28.00

675
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1611 Tubing brass/copper 12 mm dia metre 701.00

29-1612 - Ditto - but 15 mm dia metre 1,058.00

29-1613 - Ditto - but 22 mm dia metre 1,368.00

29-1614 - Ditto - but 28 mm dia metre 2,047.00

29-1615 PVC Pipe (Non pressure) 38 mm dia x 2 mm thick metre 97.00

29-1616 - Ditto - but 50 mm dia x 2.40 mm thick metre 132.00

29-1617 - Ditto - but 75 mm dia x 2.50 mm thick metre 287.00

29-1618 - Ditto - but 100 mm dia x 3.40 mm thick metre 425.00

29-1619 - Ditto - but 150 mm dia x 4.5 mm thick metre 920.00

29-1620 - Ditto - but 200 mm dia x 5.5 mm thick metre 1,437.00

29-1621 PVC Bend / Elbow 16 mm dia for conduit each 8.00

29-1622 - Ditto - but 19 mm dia for conduit each 10.00

29-1623 PVC Tee 16 mm for conduit each 13.00

29-1624 - Ditto - but 19 mm conduit each 17.00

29-1625 PVC Edge 1x29 mm metre 63.00

29-1626 - Ditto - but 1x22 mm metre 57.00

29-1627 - Ditto - but 1x19 mm metre 46.00

29-1628 - Ditto - but 1x18 mm metre 34.00

29-1629 - Ditto - but 1x12 mm metre 26.00

29-1630 PVC Edge 2x34 mm metre 74.00

29-1631 - Ditto - but 2x19 mm metre 40.00

29-1632 PVC Stoper / Base each 23.00

29-1633 Asbestos cement pipe 75 mm bore metre 82.00

29-1634 - Ditto - but 100 mm bore metre 112.00

29-1635 CI pipe 45 mm bore metre 1,040.00

29-1636 Elbow GI 3 way (Lipi / BPFI ) each 287.00

676
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1637 Pipe MS 38 mm dia adjustable with thread metre 494.00

29-1638 Pipe aluminium 19 mm dia any colour metre 89.00

29-1639 Pipe aluminium 25 mm dia any colour metre 94.00

29-1640 Pipe aluminium 25 mm dia any colour foreign made metre 155.00
1.0mm thick
29-1641 Pipe stainless (SS) 12 mm dia 2 mm thick metre 155.00

29-1642 Pipe stainless (SS) 19 mm dia 2 mm thick metre 333.00

29-1643 Pipe stainless (SS) 25 mm dia 1.5 mm thick metre 366.00

29-1644 Pipe stainless (SS) 25 mm dia 2 mm thick metre 402.00

29-1645 Pipe stainless (SS) 38 mm dia 1.5 mm thick metre 501.00

29-1646 Pipe stainless (SS) 38 mm dia 2 mm thick metre 664.00

29-1647 Pipe stainless (SS) 50 mm dia 2 mm thick metre 882.00

29-1648 Pipe stainless (SS) 75mm dia 1.2mm thick metre 815.00

29-1649 Pipe stainless (SS) 75mm dia 1.5mm thick metre 1,014.00

29-1650 Pipe stainless (SS) 100mm dia 1.3mm thick metre 1,159.00

29-1651 Pipe stainless (SS) 100mm dia 1.5mm thick metre 1,459.00

29-1652 Stainless steel (SS) Ball / Top cap / U cap / Anchor Plate each 98.00
size 25mm

29-1653 - Ditto - 38 mm each 143.00

29-1654 - Ditto - 50 mm each 207.00

29-1655 - Ditto - 75 mm each 290.00

29-1656 Stainless steel (SS) Elbow/bend 19 mm dia each 115.00

29-1657 - Ditto - 25 mm dia each 161.00

29-1658 - Ditto - 38 mm dia each 204.00

29-1659 - Ditto - 50 mm dia each 289.00

29-1660 Stainless steel (SS) sheet 20 gauge sq. m 4,289.00

29-1661 - Ditto - 22 gauge sq. m 3,708.00

677
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1662 Stainless steel (SS) chain 3 mm dia metre 569.00

29-1663 Stainless steel angle 38x38x3 mm metre 730.00

29-1664 - Ditto - 38x38x2 mm metre 598.00

29-1665 MS Socket 150 mm each 546.00

29-1666 Pivot MS each 17.00

29-1667 Pivots & socket (wrought iron) doz 425.00

29-1668 - Ditto - but (Brass) doz 2,357.00

29-1669 Pivot and Socket Brass set 220.00

29-1670 Pivot & socket 62.5 CM size iron set 109.00

29-1671 150 mm dia perforated plate for Air breather each 538.00

29-1672 Poles (1st class soft wood) metre 135.00

29-1673 Ends (1st class soft wood) each 40.00

29-1674 Ends for curtain pipe 19 mm dia each 40.00

29-1675 Ends for curtain pipe 25 mm dia each 46.00

29-1676 Poles MN kg 92.00

29-1677 Mansion Polish for ceramic brick work litre 138.00

29-1678 Polythene sheet (1 kg per 6 sq. m) sq. m 32.00

29-1679 Black oxide powder kg 178.00

29-1680 Brown powder kg 276.00

29-1681 Champa colour kg 402.00

29-1682 - Ditto - but Mahagony kg 1,150.00

29-1683 French powder kg 46.00

29-1684 Red Oxide powder kg 207.00

29-1685 Zinc Oxide powder (China) kg 138.00

29-1686 Pudlo (England) kg 552.00

29-1687 Putty kg 92.00

29-1688 Sealant for aluminium works Tube 207.00

29-1689 Rajon kg 345.00

678
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1690 Rawel plug (Plastic) gross 92.00

29-1691 Rowel bolt any size (copper / brass) each 51.00

29-1692 RCC Rail Post (750 to 900 mm) each 230.00

29-1693 Hire Rent Mixer machine 0.15 / 0.20 cu.m Hour 310.00

29-1694 - Ditto - but Tiles cutting machine Hour 34.00

29-1695 Mobilization & Transportation charge of Piles/driving Job 27,600.00

equipment
29-1696 Hire / Rent for Rig & Winch for foundation pilling Day 3,680.00

29-1697 Truck fare (5 Ton) upto 24 km incl earth Truck 2,070.00

29-1698 - Ditto - but upto 8 km incl earth Truck 2,875.00

29-1699 Rivet Pin Japan Made each 1.50

29-1700 Rivet kg 241.00

29-1701 Rivet / Sheeting bolts each 1.50

29-1702 Sand washed FM 1.20 cu. m 624.00

29-1703 - Ditto - but FM 1.50 cu. m 764.00

29-1704 - Ditto - but FM 1.80 (Av) (1/3 of 2.5 FM +2/3 of 1.5 cu. m 1,003.00
FM)
29-1705 - Ditto - but FM 2.50 (Sylhet / Others) cu. m 1,442.00

29-1706 Sand FM 0.80 (Unwashed) cu. m 405.00

29-1707 Sand FM 1.50 (Unwashed) cu. m 784.00
29-1708 Sand Vitty cu. m 381.00
29-1709 Plastic/Synthetic sand bag of capacity 0.035 cum each 17.00
excluding sand
29-1710 Sand paper 0 - 1 No each 11.00
29-1711 - Ditto - but 1.5 - 2.5 no. each 9.00

29-1712 Sash cords 1.87 cm girth Cotton metre 10.00

29-1713 - Ditto - but Nylon metre 10.00

29-1714 Sash cord with eye cotton/nylon metre 34.00

29-1715 Shash Cord for Venetian Blind metre 16.00

29-1716 Screw 8 mm dia 95 mm long each 36.00

679
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1717 Screw 6 mm x 55 mm each 20.00

29-1718 Screw mudgard 12 mm doz 10.00

29-1719 Screw mudgard 20 mm doz 12.00

29-1720 Screw mudgard 25 mm doz 13.00

29-1721 Screw Bolts 9 mm dia 7.5 cm long each 11.00

29-1722 - Ditto - but 15 cm long each 28.00

29-1723 - Ditto - but 30 cm long each 43.00

29-1724 Screw Bolts 19 mm dia 7.5 cm long each 18.00

29-1725 - Ditto - but 15 cm long each 43.00

29-1726 - Ditto - but 30 cm long each 51.00

29-1727 Screw Bolts 25 mm dia 7.5 cm long each 32.00

29-1728 - Ditto - but 15 cm long each 55.00

29-1729 - Ditto - but 30 cm long each 63.00

29-1730 Screw brass19 mm gross 115.00

29-1731 - Ditto - but 25 mm gross 172.00

29-1732 - Ditto - but 31mm gross 195.00

29-1733 Screw eyes (wrought iron) doz 41.00

29-1734 - Ditto - but (Brass) doz 165.00

29-1735 Screw Roofing each 6.00

29-1736 Tin Screw gross 414.00

29-1737 'J' Hooks/bolts 6.0mm dia 150mm long each 23.00

29-1738 J clip for fixing mirror doz 55.00

29-1739 J hooks for fixing with angle iron gross 1,023.00

29-1740 Screw wood 12 mm gross 51.00

29-1741 - Ditto - but 19 mm gross 82.00

29-1742 - Ditto - but 25 mm gross 96.00

680
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1743 - Ditto - but 31 mm gross 110.00

29-1744 - Ditto - but 38 mm gross 130.00

29-1745 - Ditto - but 50 mm gross 179.00

29-1746 - Ditto - but 62.50 mm gross 322.00

29-1747 - Ditto - but 75 mm gross 414.00

29-1748 Methi Seeds kg 93.00

29-1749 Gala (shellac fine leaf) kg 1,725.00

29-1750 Varnish Shellac kg 920.00

29-1751 Carfa kg 460.00

29-1752 Shuttering sq. m 186.00

29-1753 Sindur kg 460.00

29-1754 Yellow ochre kg 207.00

29-1755 Soap washing each 17.00

29-1756 Catches spring 5 cm each 40.00

29-1757 - Ditto - but 6.25 cm each 46.00

29-1758 Helical door spring 150 mm Brass each 920.00

29-1759 - Ditto - but Iron each 460.00

29-1760 - Ditto - but Aluminium each 258.00

29-1761 Spring for rolling shutter metre 101.00

29-1762 - Ditto - each 316.00

29-1763 Spring for sofa upholster 225mm long doz 690.00

29-1764 - Ditto - but 150mm doz 632.00

29-1765 Hydraulic door closure (China) each 1,725.00

29-1766 Hydraulic door closure (Japan) for aluminium swing door (Daimond) each 3,450.00

29-1767 Spirit Methylated litre 172.00

29-1768 Steel window adjustable stay 300 mm long made of 19x3 mm FI bar each 40.00

681
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1769 Steel board 100mmx100mmX3.00mm each 46.00

29-1770 Steel board 250mmx300mmX3.00mm each 172.00

29-1771 Saddle / Clip each 8.00

29-1772 Stone aggregate 50 mm graded cu. m 6,011.00

29-1773 -Ditto-but 19 mm graded cu. m 6,295.00

29-1774 Shingle / Gravel 19mm graded cu. m 4,060.00

29-1775 Pea gravel cu. m 3,248.00

29-1776 Stone screening cu. m 3,910.00

29-1777 Stone chips White for mosaic 3mm (Pakistan) kg 22.00

29-1778 - Ditto - but (India) kg 17.00

29-1779 Stone chips for mosaic 3mm size (Black) kg 17.00

29-1780 Stone coloured chips kg 17.00

29-1781 Marble stone 12 mm thick (India) sq. m 7,475.00

29-1782 - Ditto - but 19 mm thick (India) sq. m 9,283.00

29-1783 Pumice stone / Carborandum forgin made each 195.00

29-1784 12 mm thick marble stone other then India sq. m 7,417.00

29-1785 10 /12 mm thick granite (foreign) other than India sq. m 7,475.00

29-1786 Foot press stopper (Japan/china made) each 172.00

29-1787 Foot press stopper (Plastic block Local made) each 92.00

29-1788 Tack cut steel any size kg 178.00

29-1789 Tape Insulation roll 29.00

29-1790 Tarja matting double sq. m 86.00

29-1791 RCC Tee 150 mm bore each 460.00

29-1792 RCC Tee 100 mm bore each 402.00

29-1793 150 x 100 mm C I plain Tee each 2,070.00

29-1794 Thinner litre 170.00

682
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1795 Thinner for tennis court paint (T2) litre 339.00

29-1796 Red facing tiles BISF 142 x 142 x 8.5mm sq. m 897.00

29-1797 Red facing tiles BISF 100 x 100 x 8.5mm sq. m 460.00

29-1798 Chalklet facing tiles BISF 142 x 142 x 8.5mm sq. m 1,207.00

29-1799 Chalklet facing tiles BISF 95 x 95 x 8.5mm sq. m 632.00

29-1800 Ceramic glazed tiles wall (coloured / printed) size sq. m 640.00
250x400 mm (MIR / Madhumati)
29-1801 Ceramic glazed tiles wall (coloured / printed) size sq.m 519.00
200x300 mm (MIR / Madhumati)
29-1802 Ceramic glazed tiles wall size 200x300 mm (RAK ) sq. m 531.00

29-1803 Ceramic glazed tiles wall size 250x330 mm (RAK) sq. m 644.00

29-1804 Ceramic glazed tiles wall size 250x400 mm (RAK sq. m 687.00
/MIR)
29-1805 Ceramic glazed tiles floor size 300x300 mm (MIR) sq.m 483.00

29-1806 Ceramic glazed tiles floor special size 300x300 mm sq. m 508.00
(MIR)
29-1807 Ceramic glazed tiles floor size 400x400 mm (MIR) sq.m 891.00

29-1808 Ceramic glazed tiles wall red body size 305x510 mm sq. m 805.00
(RAK)
29-1809 Glazed tiles wall design Fu-wang 200x300 mm sq.m 621.00

29-1810 Glazed tiles wall special design Fu-wang 200x300 mm sq. m 632.00

29-1811 Glazed tiles wall plain Fu-wang 200x300 mm sq.m 615.00

29-1812 Glazed tiles wall luxury (Luster colour) Fu-wang sq. m 632.00
200x300 mm
29-1813 Glazed tiles wall luxury (Roto colour) Fu-wang 200x300 sq.m 621.00
mm
29-1814 Glazed tiles wall luxury special Fu-wang 250x360 mm sq. m 667.00

29-1815 Glazed tiles wall luxury Fu-wang 310x450 mm sq.m 690.00

29-1816 Glazed tiles wall luxury polished Fu-wang 310x450 mm sq. m 501.00

29-1817 Glazed tiles wall Exterior Fu-wang 65x200 mm sq. m 621.00

29-1818 Glazed tiles wall white body (squaring) 305x510 mm sq. m 768.00
(RAK)
29-1819 Glazed tiles wall white body (squaring) 300x600 mm sq. m 940.00
(RAK)

683
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1820 Glazed tiles wall (Matt) 250x400 mm (RAK) sq. m 776.00

29-1821 Glazed tiles floor Homogeneous GP 400x400 mm sq. m 830.00

(RAK)
29-1822 Glazed tiles floor Homogeneous mettalic 400x400 mm sq. m 878.00
(RAK)
29-1823 Glazed tiles floor Homogeneous mettalic 305x305 mm sq.m 742.00
(RAK)
29-1824 Glazed tiles floor Homogeneous GP mirror polish sq.m 1,040.00
400x400 mm (RAK)

29-1825 Glazed tiles floor Homogeneous GP mirror polish sq.m 1,411.00

595x595 mm (RAK)

29-1826 Glazed tiles Stair bull nose 305x305 mm (RAK) sq. m 792.00

29-1827 Glazed tiles Stair group 305x305 mm (RAK) sq. m 862.00

29-1828 Glazed tiles floor Homogeneous 400x400 mm (MIR) sq. m 817.00

29-1829 Glazed tiles floor Homogeneous 400x400 mm (MIR) G- sq. m 1,238.00

4400 GL
29-1830 Glazed tiles floor Homogeneous 400x400 mm (MIR) G- sq.m 878.00
4400, 4402,4403, 4404, 4405, 4406, 4407
29-1831 Glazed tiles Homogeneous stair 260x300 mm (MIR) sq. m 833.00
29-1832 Glaze Tiles floor (Matt) 316x316 mm (RAK) sq. m 609.00

29-1833 Glaze Tiles floor (Matt) 400x400 mm (RAK) sq. m 661.00

29-1834 Glaze Tiles floor plain 310x310 mm (Fu-wang) sq. m 511.00

29-1835 Ceramic glazed tiles floor, coloured/printed (Fu wang) sq. m 523.00
size 310x310mm

29-1836 Ceramic glazed tiles floor special design (Fu wang) size 310x310mm sq. m 511.00

29-1837 Ceramic glazed tiles floor luxury (Fu wang) size 310 x 310 mm sq.m 517.00

29-1838 Ceramic glazed tiles floor luxury (Fu wang) size 420 x 420 mm sq.m 759.00

29-1839 Glazed tiles wall (China) any size and design sq.m 782.00

29-1840 Glazed tiles wall (other than china) any size and design sq.m 822.00

29-1841 Ceramic glazed tiles floor (MIR) size 300 x 300 mm sq. m 506.00

29-1842 Ceramic glazed tiles floor special (MIR) size 300 x 300 mm sq. m 552.00

29-1843 Floor tiles non-slide (Foreign made) any Size sq. m 1,587.00

684
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1844 Floor tiles coloured (Madhumati ) 316x316 mm sq. m 747.00

29-1845 Floor tiles coloured (Madhumati ) 400x400 mm sq. m 782.00

29-1846 Floor tiles Homogeneous (MIR code G-3300, 3302, sq. m 755.00
3303, 3304, 3305, 3306, 3307, 3023, 3026) 300 x 300
mm
29-1847 - Ditto - (RAK code -GP, 7GP, 173G, 173UP) 400 x 400 mm sq. m 929.00

29-1848 Floor tiles Homogeneous mirror polish (MIR code G- sq. m 1,014.00
4401) 400 x 400 mm

29-1849 - Ditto - (MIR code G-4400GL) 400 x 400 mm sq. m 1,238.00

29-1850 - Ditto - (RAK code-GP) 400 x 400 mm sq. m 1,040.00

29-1851 Homogeneous floor parquet sheet / wood alder type (foreign) sq. m 3,714.00

29-1852 Stair tiles Homogeneous (Fu-wang code-3601, 3611 / sq. m 805.00

MIR code ST-2600, 2602) size 260x 300mm

29-1853 Sealer for bone tiles litre 437.00

29-1854 Floor tiles homogenous 100x400 (Fu-Wang code - sq. m 920.00

B2301, 23260, 215, 219, 23256, 23561)

29-1855 Floor tiles homogenous (Fu-Wang code- sq. m 908.00

30906,30910,4001,4011)
29-1856 Timber in Scantling Chamble cu. m 105,800.00

29-1857 - Ditto - but Chittagong Teak cu. m 203,061.00

29-1858 - Ditto - but Gamar (Ctg.) cu. m 81,224.00

29-1859 - Ditto - but Garjon cu. m 81,224.00

29-1860 - Ditto - but Jessore Teak cu. m 161,000.00

29-1861 - Ditto - but Jarul cu. m 93,150.00

29-1862 - Ditto - but Kathal cu. m 115,575.00

29-1863 - Ditto - but Mango cu. m 22,770.00

29-1864 - Ditto - but Shisham / Mehgoni cu. m 80,500.00

29-1865 - Ditto - but Silkorai (Ctg. ) cu. m 103,500.00

29-1866 - Ditto - but Telshu cu. m 101,200.00

685
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1867 - Ditto - but Tit Chamble cu. m 138,000.00

29-1868 Mango wood 25mm thick for 6 time shuttering cu. m 27,600.00

29-1869 Hard wood beads metre 43.00

29-1870 Wooden Bead metre 25.00

29-1871 Timber plank 9.3 sq. mx38mmx1/2 using 6 times cu. m 23,000.00

29-1872 Runner 4.5 Nos x3.0mx75mmx38mm using 6 times cu. m 24,150.00

(Mango)
29-1873 Hard wood cleat n.exc 250 cum wrought and splayed each 43.00

29-1874 Hard board sheets 3 mm thick sq. m 155.00

29-1875 Gypsum board 10 mm thick sq. m 310.00

29-1876 Melamine laminated board 12 mm thick sq. m 765.00

29-1877 - Ditto - but 16 mm thick sq. m 765.00

29-1878 - Ditto - but 18 / 19mm thick sq. m 893.00

29-1879 - Ditto - but 25 mm thick sq. m 1,099.00

29-1880 - Ditto - but 30 mm thick sq. m 1,322.00

29-1881 - Ditto - but 3 mm thick sq. m 402.00

29-1882 Partex board 8 mm thick 400 density sq. m asin

29-1883 - Ditto - but 12 mm thick 500 density sq. m 460.00

29-1884 - Ditto - but 19 mm thick 400 density sq. m 575.00

29-1885 - Ditto - but 19 mm thick 500 density sq. m 575.00

29-1886 - Ditto - but 26 mm thick 400 density sq. m 874.00

29-1887 - Ditto - but 26mm thick 500 density sq. m 874.00

29-1888 Veneered Partex board 8 mm thick 600 density sq. m 1,702.00

29-1889 - Ditto - but 12mm thick 500 density chapalish sq. m 1,354.00

29-1890 - Ditto - but 19mm thick 500 density chapalish sq. m 1,508.00

29-1891 - Ditto - but 12mm thick 500 density Teak sq. m 1,315.00

29-1892 - Ditto - but 19mm thick 500 density Teak sq. m 1,412.00

686
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1893 - Ditto - but 12mm thick 500 density Garjon sq. m 967.00

29-1894 - Ditto - but 19mm thick 500 density Garjon sq. m 1,074.00

29-1895 - Ditto - but 26 mm thick 500 density chapalish sq. m 1,721.00

29-1896 Ply wood 3 mm thick sq. m 353.00

29-1897 - Ditto - but 4 mm thick sq. m 424.00

29-1898 - Ditto - but 6 mm thick sq. m 573.00

29-1899 - Ditto - but 12 mm thick sq. m 783.00

29-1900 - Ditto - but 19 mm thick sq. m 1,013.00

29-1901 - Ditto - but 25 mm thick sq. m 1,320.00

29-1902 Ply wood one side laminated 3 mm thick sq. m 713.00

29-1903 Flush door (Star Particle) 36 mm (Both side veneered) sq. m 2,810.00
Garjon
29-1904 - Ditto - but Chapalish sq. m 3,404.00

29-1905 - Ditto - but Tit Chamble/Champa sq. m 3,404.00

29-1906 - Ditto - but Burma Teak sq. m 4,271.00

29-1907 Vertical blind 75-125 mm width sq. m 2,127.00

29-1908 Vertical blind 125 mm width synthetic fibre cloth foreign sq. m 2,328.00

29-1909 Venetian blind 25 mm width sq. m 1,552.00

29-1910 Flush door 36 mm (Star Particle) Garjon ( Size sq. m 2,389.00

2.08mx0.76m to 2.08mx1.06 m)

29-1911 - Ditto - but Chapalish ( Size 2.08mx0.76m to sq. m 2,995.00

2.08mx1.06 m)
29-1912 - Ditto - but Tit Chamble(2.08mx0.76m to 2.08mx1.06 sq. m 2,995.00
m)
29-1913 - Ditto - but Champa ( Size 2.08mx0.76m to sq. m 2,995.00
2.08mx1.06 m)
29-1914 - Ditto - but Burma Teak ( Size 2.08mx0.76m to sq. m 3,850.00
2.08mx1.06 m)
29-1915 Vinyl Board as on ceiling as spd sq. m 540.00

29-1916 Gypsum board (Vinyl pested) as on ceiling as spd sq. m 793.00

687
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1917 Fibre board (MDF) medium density thick 18 mm sq. m 1,144.00

29-1918 - Ditto - but 12 mm sq. m 1,063.00

29-1919 - Ditto - but 3 mm sq. m 747.00

29-1920 Flush door (Star Particle) 36 mm thick one side vinyl sq. m 3,762.00
laminated (2.08x0.76 M to 2.08 x 1.06 M) Burma teak

29-1921 - Ditto - but Champa sq. m 3,330.00

29-1922 - Ditto - but Chapalish sq. m 3,330.00

29-1923 Flush door (Star Particle) 36 mm thick one side vinyl sq. m 4,234.00
laminated (2.08x0.76 M to 2.08 x0.68 M) Burma teak

29-1924 - Ditto - but Champa sq. m 3,800.00

29-1925 - Ditto - but Chapalish sq. m 3,507.00

29-1926 Flush door (Star Particle) 36 mm thick both side vinyl sq. m 2,909.00
laminated (2.8x0.76 M to 2.08 x1.06 M) Chaplish

29-1927 - Ditto - but (2.8x0.6 M to 2.08 x.68 M) Chaplish sq. m 3,467.00

29-1928 Partex Vinyl board one side laminated 500 density 12 sq. m 546.00
mm thick
29-1929 - Ditto - but 19 mm thick sq. m 603.00
29-1930 - Ditto - but both side laminated 12 mm thick sq. m 710.00

29-1931 - Ditto - but 19 mm thick sq. m 954.00

29-1932 - Ditto - but 600 density 8 mm thick one side laminated sq. m 396.00

29-1933 - Ditto - but both side laminated sq. m 747.00

29-1934 PCC Pre cast ventilator 450x225 mm size of any design each 166.00

29-1935 - Ditto - 450x300 mm size of any design each 178.00

29-1936 PCC ventilator each 115.00

29-1937 Bitumen washer gross 57.00

29-1938 Limpet washer gross 143.00

29-1939 5 mm thick PVC water stopper 150 mm wide metre 172.00

29-1940 6 mm thick PVC water stopper 200 mm wide metre 230.00

29-1941 - Ditto - but 250 mm wide metre 264.00

688
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1942 Water base acrylic sealer litre 202.00
29-1943 Water paper each 28.00
29-1944 Wax bee kg 345.00
29-1945 Gas welding of MS or wrought iron metre 552.00
29-1946 Electric welding of cast or wrought iron metre 218.00
29-1947 Welding electrode 8 SWG each 8.00
29-1948 Wheel 50 mm dia steel each 517.00
29-1949 Wheel for Glass each 34.00
29-1950 Wheel for Trolley 50 mm dia set of 4 set 690.00
29-1951 - Ditto - but 40 mm dia set of 4 each 345.00
29-1952 - Ditto - but 150 mm dia Japan each 1,610.00
29-1953 - Ditto - but 75 mm dia Japan each 805.00
29-1954 Steel wheel for Venetian blind sq. m 115.00
29-1955 GI wire kg 115.00

29-1956 GI wire 14 SWG metre 11.00

29-1957 Frame glass door 4 mm for wagon each 575.00

29-1958 Glass door 5 mm thick sq.m 1,495.00

29-1959 Heating Fire wood kg 11.00

29-1960 Wooden board (Teak) 100x100 mm each 57.00

29-1961 Wooden board (Teak) 250x300 mm each 184.00

29-1962 Plastic wood 10 mm thick sq. m 1,322.00

29-1963 - Ditto - but 5/6 mm thick sq. m 667.00

29-1964 - Ditto - but 3 mm thick sq. m 425.00

29-1965 Plastic (Hollow) board 10 mm thick sq.m 419.00

29-1966 Plastic Sheet 3 mm sq. m 1,058.00

29-1967 Plastic door 25 mm thick including chowkat / frame each 5,175.00

29-1968 - Ditto - but 32 mm thick each 5,011.00

29-1969 C R pipe 6 mm dia. metre 46.00

689
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1970 Neocidol - 60 litre 207.00

29-1971 32 mm thick hollow plastic door shutter with chowkat sq. m 2,507.00

29-1972 Foam lub admixture of BARAL CHEMICAL litre 281.00

29-1973 Desalt (SO1) equivalent admixture of BARAL litre 425.00

CHEMICAL
29-1974 Hydro-seal Ef-32 admixture of BARAL CHEMICAL litre 515.00

29-1975 Hydro-seal Ef-34 admixture of BARAL CHEMICAL litre 595.00

29-1976 Pesterthy powder admixture of BARAL CHEMICAL kg 1,942.00

29-1977 Mosasol admixture of BARAL CHEMICAL litre 810.00

29-1978 Marbosol admixture of BARAL CHEMICAL kg 805.00

29-1979 Gray cementitious alloy /equivalent chemical of BARAL litre 425.00

CHEMICAL

29-1980 Pestoklea admixture of BARAL CHEMICAL litre 2,530.00

29-1981 Pestonol admixture of BARAL CHEMICALt (Termite litre 2,530.00

controling liquid)

29-1982 High strength highly liquified constructional epoxy litre 1,942.00

(A&B) admixture of BARAL CHEMICAL

29-1983 Flexicem AB of BARAL CHEMICAL litre 1,437.00

29-1984 Pestocon of BARAL CHEMICAL (200 mm) litre 414.00

29-1985 uPVC Pipe bore 38/40 mm, Non-pressure, wall thickness metre 92.00
2.0mm
29-1986 uPVC Pipe bore 50 mm, Non-pressure, wall thickness metre 143.00
2.4 mm
29-1987 uPVC Pipe bore 75 mm, Non-pressure, wall thickness 3 metre 276.00
mm
29-1988 uPVC Pipe bore 100 mm, Non-pressure, wall thickness metre 400.00
3.4 mm
29-1988A uPVC Pipe bore 100 mm, Non-pressure, wall thickness metre 350.00
4.2mm
29-1989 uPVC Pipe bore 150 mm, Non-pressure, wall thickness 4 metre 801.00
mm
29-1990 uPVC plain bend 50 mm dia each 55.00

29-1991 uPVC plain bend 100 mm dia each 228.00

29-1992 uPVC door bend 100 mm dia each 195.00

690
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-1993 uPVC door bend 150 mm dia each 488.00

29-1994 uPVC Plain Tee 50 mm dia each 111.00

29-1995 uPVC Plain Tee 100 mm dia each 351.00

29-1996 uPVC Plain Tee 150 mm dia each 862.00

29-1997 uPVC door Tee 100 mm dia each 238.00

29-1998 uPVC double branch 100 mm dia each 276.00

29-1999 uPVC floor trap (P or S type) 100 mm dia each 270.00

29-2000 uPVC Cowel 50 mm dia each 103.00

29-2001 uPVC Cowel 100 mm dia each 58.00

29-2002 uPVC Cowel 150 mm dia each 218.00

29-2003 uPVC Y / T section 50 mm bore each 163.00

29-2004 uPVC Y / T section 100 mm bore each 287.00

29-2005 uPVC Y / T section 150 mm bore each 373.00

29-2006 Diffuser 200x200 mm each 1,725.00

29-2007 Diffuser 250x250 mm each 2,185.00

29-2008 Diffuser 300x300 mm each 2,541.00

29-2009 Diffuser 350x350 mm each 2,702.00

29-2010 Diffuser 400x400 mm each 3,231.00

29-2011 Diffuser 450x450 mm each 8,337.00

29-2012 Pre-filter for central Air conditioner each 11,244.00

29-2013 Intermediate filter for central Air conditioner each 25,556.00

29-2014 Hepa filter for central Air conditioner each 41,093.00

29-2015 Gas freon 12 kg 434.00

29-2016 Gas freon 22 kg 486.00

29-2017 Return grill 200x200 mm each 2,875.00

29-2018 Return grill 250x250 mm each 3,162.00

29-2019 Return grill 300x300 mm each 3,507.00

691
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2020 Return grill 350x350 mm each 3,565.00

29-2021 Return grill 400x400 mm each 3,967.00

29-2022 Return grill 450x450 mm each 4,290.00

29-2023 Thermostat switch for air conditioner each 511.00 E/M

29-2024 Thermostat switch for refrigerator each 409.00

29-2025 Selector switch foreign made for Window type Air each 613.00
cooler / conditioner

29-2026 Facing bricks ATI ceramic any colour size M nos 16,675.00
228.6x63.5x12 mm
29-2027 Iron Wire 32 Gauze 7x7 mesh sq. m 4,036.00

29-2028 Iron Wire 24 Gauze 7x7 mesh sq. m 4,013.00

29-2029 Ceramic Glazed tiles ATI any colour size 300x300 mm sq. m 644.00

29-2030 Ceramic Glazed tiles ATI any colour size 400x400 mm sq. m 706.00

29-2031 Ceramic Glazed tiles ATI mono colour any size sq. m 805.00

29-2032 Homogeneous mirror polish foreign made size 600x600 mmsq. m 2,535.00

29-2033 Combi closet RAK product Karla each 6,274.00

29-2034 Combi closet RAK product Orient each 7,476.00

29-2035 3 hole re-inforcing Bricks size 237.5x112x70 mm M nos 19,320.00

(MCW Ltd)
29-2036 In / out side wall facing strips DT-5 200x62x16 mm M nos 21,562.00
colour Red
29-2037 In / out side wall facing strips DT-5 200x62x16 mm M nos 24,150.00
colour Black
29-2038 In / out side wall facing strips DT-5 200x62x16 mm M nos 25,012.00
colour Beige /Grey /Staffordshire mixed stone

29-2039 In / out side wall facing strips DT-5 200x62x12 mm M nos 28,750.00
colour Apricot

29-2040 In / out side wall facing strips DT-5 200x62x12 mm M nos 34,500.00
colour peach
29-2041 In / out side wall facing strips DT-5 200x62x12 mm M nos 36,800.00
colour Red

692
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2042 In / out side wall facing strips DT-5 200x62x25 mm M nos 27,485.00
colour Black/Beige

29-2043 In / out side wall facing strips DT-5 200x62x9mm colour M nos 16,675.00
Apricot
29-2044 In / out side wall facing strips DT-5 200x75x9 mm M nos 21,275.00
colour Red
29-2045 In / out side wall facing strips DT-5 200x75x19 mm M nos 33,350.00
colour Beige
29-2046 In / out side wall facing strips Sand stone effect 225x100 M nos 51,750.00
mm colour Grey

29-2047 In / out side wall facing strips Textured tiles 225x37.5 M nos 15,525.00
mm colour Red

29-2048 In / out side wall facing strips Textured tiles 225x37.5 M nos 17,250.00
mm colour Beige
29-2049 In / out side wall facing strips Smooth surface 225x37.5 M nos 15,525.00
mm colour Red
29-2050 In / out side wall facing strips Smooth surface 225x37.5 M nos 16,500.00
mm colour Black/Beige

29-2051 In / out side wall facing strips Smooth surface 150x25 M nos 6,957.00
mm colour Red /Black /Beige/ Grey/ Staffordshire mixed
stone
29-2052 In / out side wall facing strips Smooth surface 150x25 M nos 8,912.00
mm colour Apricot/Peach

29-2053 In / out side wall facing strips Paty design 200x100 mm M nos 31,625.00
colour Red/Black/Beige

29-2054 In / out side wall facing strips Mountain tiles 150x100 M nos 20,700.00
mm colour Red/Beige/ Grey/ Staffordshird mixed stone

29-2055 In / out side wall facing strips Mountain tiles 150x100 M nos 20,125.00
mm colour Peach

29-2056 In / out side wall facing strips Ruby design size 112x75 M nos 11,500.00
mm colour Red/Black/Beige/Grey/ Staffordsired mixed
stone
29-2057 In / out side wall facing strips Ruby design size 112x75 M nos 15,525.00
mm colour Peach

29-2058 In / out side wall facing strips Centered tapered size M nos 18,745.00
100x100 mm colour Red/Beige

693
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2059 In / out side wall facing strips Embossed design size M nos 15,180.00
100x100 mm colour Red/Black/ Beige/ Grey
/Staffordsired mixed stone
29-2060 In / out side wall facing strips Embossed design size M nos 17,940.00
100x100 mm colour Peach

29-2061 In / out side wall facing strips Stone effect tiles size M nos 15,295.00
100x100 mm colour Red
29-2062 In / out side wall facing strips Stone effect tiles size M nos 17,825.00
100x100 mm colour Black/Beige/Grey

29-2063 In / out side wall facing strips Smooth surface size M nos 15,525.00
100x100 mm colour Red

29-2064 In / out side wall facing strips Smooth surface size M nos 17,710.00
100x100 mm colour Black/Beige

29-2065 In / out side wall facing strips Smooth surface size M nos 21,505.00
100x100 mm colour Apricot

29-2066 In / out side wall facing strips Klinker facing size M nos 16,100.00
200x50x50 mm colour Maroon

29-2067 Roofing/Ceiling/Flooring Blocks Roof Tiles-Taylor size M nos 28,520.00

125x171mm colour Red

29-2068 Roofing/Ceiling/Flooring Blocks Roof Tiles-Taylor size M nos 35,075.00

125x171mm colour Black

29-2069 Roofing/Ceiling/Flooring Blocks Roof Tiles-Taylor size M nos 32,200.00

125x171mm colour Beige

29-2070 Roofing/Ceiling/Flooring Blocks Roof Tiles-Flower size M nos 27,025.00

175x175mm colour Red

29-2071 Roofing/Ceiling/Flooring Blocks Roof Tiles-Flower size M nos 30,015.00

175x175mm colour Black

29-2072 Roofing/Ceiling/Flooring Blocks Roof Tiles-Flower size M nos 28,175.00

175x175mm colour Beige

29-2073 Roofing/Ceiling/Flooring Blocks Roof Tiles-Channel C M nos 30,590.00

size 200x100mm v Red

29-2074 Roofing/Ceiling/Flooring Blocks Roof Tiles-Channel C M nos 35,075.00

size 200x100mm colour Black

694
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2075 Roofing/Ceiling/Flooring Blocks Roof Tiles-Channel C M nos 32,660.00
size 200x100mm colour Beige

29-2076 Roofing/Ceiling/Flooring Blocks Roof Tiles-Channel B M nos 30,475.00

size 200x100mm colour Red

29-2077 Roofing/Ceiling/Flooring Blocks Roof Tiles-Channel B M nos 35,420.00

size 200x100mm colour Black

29-2078 Roofing/Ceiling/Flooring Blocks Roof Tiles-Channel B M nos 32,775.00

size 200x100mm colour Beige

29-2079 Roofing/Ceiling/Flooring Blocks Roof Tiles-Ridge size M nos 28,520.00

200x100mm colour Red

29-2080 Roofing/Ceiling/Flooring Blocks Roof Tiles-Ridge size M nos 35,880.00

200x100mm colour Black

29-2081 Roofing/Ceiling/Flooring Blocks Roof Tiles-Ridge size M nos 31,970.00

200x100mm colour Beige

29-2082 Roofing/Ceiling/Flooring Blocks Roof Tiles-Round size M nos 35,880.00

200x125mm colour Red

29-2083 Roofing/Ceiling/Flooring Blocks Roof Tiles-Ruond size M nos 43,930.00

200x125mm colour Black

29-2084 Roofing/Ceiling/Flooring Blocks Roof Tiles-Round size M nos 40,307.00

200x125mm colour Beige

29-2085 Roofing/Ceiling/Flooring Blocks Roof Tiles-Residence M nos 32,775.00

size 200x125mm colour Red

29-2086 Roofing/Ceiling/Flooring Blocks Roof Tiles-Residence M nos 41,515.00

size 200x125mm colour Black

29-2087 Roofing/Ceiling/Flooring Blocks Roof Tiles-Residence M nos 37,950.00

size 200x125mm colour Beige

29-2088 High Load Bearing Pavers size 200x100x50mm colour M nos 19,550.00
Red
29-2089 High Load Bearing Pavers size 200x100x20mm colour M nos 25,415.00
Red
29-2090A High Load Bearing Pavers size 200x100x20mm colour M nos 22,775.00
Black
29-2090A High Load Bearing Pavers size 200x100x20mm colour M nos 32,775.00
Beige
29-2090A High Load Bearing Pavers size 200x100x20mm colour M nos 35,650.00
Apricot

695
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2090A High Load Bearing Pavers size 100x100x20mm colour M nos 15,295.00
Red
29-2090B High Load Bearing Pavers size 100x100x20mm colour M nos 18,975.00
Black
29-2090B High Load Bearing Pavers size 100x100x20mm colour M nos 19,320.00
Beige
29-2090B High Load Bearing Pavers size 100x100x20mm colour M nos 21,850.00
Apricot
29-2090B High Load Bearing Pavers size 100x100x50mm colour M nos 14,720.00
Red
29-2091 High Load Bearing Pavers size 100x100x50mm colour M nos 17,135.00
Maroon
29-2092 High Load Bearing Pavers size 200x50x50mm colour M nos 16,100.00
Red
29-2093 High Load Bearing Pavers size 200x50x50mm colour M nos 16,100.00
Maroon
29-2094 High Load Bearing CT-10 size 230/150x80x25mm M nos 20,700.00
colour Red
29-2095 High Load Bearing CT-10 size 230/150x80x25mm M nos 28,750.00
colour Black
29-2096 High Load Bearing CT-10 size 230/150x80x25mm M nos 28,750.00
colour Beige
29-2097 High Load Bearing CT-10 size 230/150x80x25mm M nos 35,650.00
colour Apricot
29-2098 High Load Bearing CT-3 size 150x150x25mm colour M nos 26,450.00
Red
29-2099 High Load Bearing CT-3 size 150x150x25mm colour M nos 43,700.00
Black
29-2100 High Load Bearing CT-3 size 150x150x25mm colour M nos 29,900.00
Beige
29-2101 High Load Bearing CT-3 size 150x150x25mm colour M nos 35,075.00
Apricot
29-2102 High Load Bearing Button Tiles size 300x300mm colour M nos 97,750.00
Red
29-2103 High Load Bearing Button Tiles size 300x300mm colour M nos 98,325.00
Black
29-2104 High Load Bearing Button Tiles size 300x300mm colour M nos 120,750.00
Beige
29-2105 Fancy Screens (Ornamental screens) Design No.-1 size Each 32.00
138x138x100mm
29-2106 Fancy Screens (Ornamental screens) Design No.-20 size Each 37.00
150x150x100mm
29-2107 Fancy Screens (Ornamental screens) Design No.-21 size Each 37.00
150x150x113mm
29-2108 Fancy Screens (Ornamental screens) Design No.-3 size Each 32.00
100x100x100mm

696
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2109 Fancy Screens (Ornamental screens) Design No.-24 size Each 46.00
200x200x106mm

29-2110 Fancy Screens (Ornamental screens) Design No.-25 size Each 46.00
200x200x113mm

29-2111 Fancy Screens (Ornamental screens) Design No.-31 size Each 46.00
200x119x100mm

29-2112 Fancy Screens (Ornamental screens) Design No.-27 size Each 37.00
150x150x100mm

29-2113 Brick work with Mirpur ceramic having 3 holes size M nos 20,700.00
240x162x100mm

29-2114 Brick work with Mirpur ceramic having 3 holes M nos 12,650.00
size120x165x115
29-2115 Brick work with Mirpur ceramic having 3 holes re- M nos 23,000.00
inforcing size 240x113x70mm

29-2116 SS hings 10cm long doz 966.00

29-2117 SS hings 7.5cm long doz 483.00

29-2118 SS bow handle 15cm long doz 690.00

29-2119 SS sliding bolt 15 mm dia 25.00 cm long each 345.00

29-2120 SS sliding bolt 15 mm dia 30.00 cm long each 460.00

29-2121 18/19 mm thick granite (Foreign made) other than India Sq m 12,075.00

29-2122 Plastic door 36 mm thick (solid) including chowkat / each 5,819.00

frame with SS mongeries. (Size 750 x 2100 mm)

29-2123 Plastic door 36 mm thick (hollow) including chowkat / each 3,949.00

frame with SS mongeries. (Size 750 x 2100 mm)
New Item

29-2124 Aluminium sliding frame ALTECH 75 mm die no metre 402.00

2121N sliding outer top (Silver)
29-2125 - Ditto - (Bronze) metre 408.00

29-2126 - Ditto - (Black) metre 414.00

697
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2127 - Ditto - (P/C) metre 425.00

29-2128 - Ditto - die no 2120A sliding outer bottom (Silver) (L) metre 258.00

29-2129 - Ditto - (Bronze) (L) metre 276.00

29-2130 - Ditto - (Black) (L) metre 281.00

29-2131 - Ditto - (P/C) (L) metre 287.00

29-2132 - Ditto - die no 2120 sliding outer bottom (Silver) (H) metre 333.00

29-2133 - Ditto - (Bronze) (H) metre 339.00

29-2134 - Ditto - (Black) (H) metre 356.00

29-2135 - Ditto - (P/C) (H) metre 345.00

29-2136 - Ditto - die no 2122 N sliding outer side (Silver) metre 316.00

29-2137 - Ditto - (Bronze) metre 322.00

29-2138 - Ditto - (Black) metre 333.00

29-2139 - Ditto - (P/C) metre 345.00

29-2140 - Ditto - die no 1440 sliding shutter top (Silver) metre 276.00

29-2141 - Ditto - (Bronze) metre 287.00

29-2142 - Ditto - (Black) metre 295.00

29-2143 - Ditto - (P/C) metre 299.00

29-2144 - Ditto - die no 1441 sliding shutter bottom (Silver) metre 333.00

29-2145 - Ditto - (Bronze) metre 345.00

29-2146 - Ditto - (Black) metre 356.00

29-2147 - Ditto - (P/C) metre 361.00

29-2148 - Ditto - die no 1443 sliding shutter lock (Silver) metre 327.00

29-2149 - Ditto - (Bronze) metre 333.00

29-2150 - Ditto - (Black) metre 345.00

29-2151 - Ditto - (P/C) metre 351.00

29-2152 - Ditto - die no 2124 sliding shutter inter lock (Silver) metre 333.00

29-2153 - Ditto - (Bronze) metre 338.00

29-2154 - Ditto - (Black) metre 351.00

698
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2155 - Ditto - (P/C) metre 356.00

29-2156 - Ditto - die no -9823 fixed top & side 75 mm (silver) metre 345.00

29-2157 - Ditto - (Bronze) metre 471.00

29-2158 - Ditto - (Black) metre 477.00

29-2159 - Ditto - (P/C) metre 494.00

29-2160 - Ditto - die no -9821 fixed bottom75 mm (Silver) metre 356.00

29-2161 - Ditto - (Bronze) metre 362.00

29-2162 - Ditto - (Black) metre 368.00

29-2163 - Ditto - (P/C) metre 373.00

29-2164 - Ditto - die no -9820 fixed bottom cover 75 metre 172.00

mm(Silver)
29-2165 - Ditto - (Bronze) metre 178.00

29-2166 - Ditto - (Black) metre 178.00

29-2167 - Ditto - (P/C) metre 178.00

29-2168 - Ditto - die no -9819 plane cover (Silver) metre 14.00

29-2169 - Ditto - (Bronze) metre 149.00

29-2170 - Ditto - (Black) metre 149.00

29-2171 - Ditto - (P/C) metre 155.00

29-2172 - Ditto - die no -9818 wall frame (Silver) metre 350.00

29-2173 - Ditto - (Bronze) metre 356.00

29-2174 - Ditto - (Black) metre 362.00

29-2175 - Ditto - (P/C) metre 368.00

29-2176 - Ditto - die no -9822 Grove cover (Silver) metre 230.00

29-2177 - Ditto - (Bronze) metre 235.00

29-2178 - Ditto - (Black) metre 241.00

29-2179 - Ditto - (P/C) metre 258.00

29-2180 Aluminium sliding frame ALTECH 90-95 mm die no - metre 448.00

1437 outer top (Silver)
29-2181 - Ditto - (Bronze) metre 471.00

699
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2182 - Ditto - (Black) metre 483.00

29-2183 - Ditto - (P/C) metre 488.00

29-2184 - Ditto - die no -1438A outer frame (Silver) L metre 258.00

29-2185 - Ditto - (Bronze) L metre 276.00

29-2186 - Ditto - (Black) L metre 285.00

29-2187 - Ditto - (P/C) L metre 304.00

29-2188 - Ditto - die no -1438 outer frame (Silver) H metre 402.00

29-2189 - Ditto - (Bronze) H metre 414.00

29-2190 - Ditto - (Black) H metre 423.00

29-2191 - Ditto - (P/C) H metre 431.00

29-2192 - Ditto -die no -1439 outer side (Silver) metre 333.00

29-2193 - Ditto - (Bronze) metre 350.00

29-2194 - Ditto - (Black) metre 368.00

29-2195 - Ditto - (P/C) metre 379.00

29-2196 - Ditto - die no -1444 Net section (Silver) metre 212.00

29-2197 - Ditto - (Bronze) metre 218.00

29-2198 - Ditto - (Black) metre 218.00

29-2199 - Ditto -(P/C) metre 235.00

29-2200 - Ditto - die no -1447 Net handle (Silver) metre 184.00

29-2201A - Ditto - (Bronze) metre 195.00

29-2202A - Ditto - (Black) metre 201.00

29-2203A - Ditto - (P/C) metre 201.00

29-2204A - Ditto - die no -6005 fixed side & top 90-95 mm metre 465.00
(Silver)
29-2205A - Ditto - (Bronze) metre 471.00

29-2206A - Ditto - (Black) metre 534.00

29-2207A - Ditto - (P/C) metre 552.00

29-2208A - Ditto - die no -9987 fixed bottom 90-95 mm (Silver) metre 460.00

29-2209A - Ditto - (Bronze) metre 471.00

700
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2210A - Ditto - (Black) metre 477.00

29-2211A - Ditto - (P/C) metre 488.00

29-2212A - Ditto - die no -9991 fixed bottom cover 90-95 mm metre 184.00
(Silver)
29-2213A - Ditto - (Bronze) metre 201.00

29-2214A - Ditto - (Black) metre 201.00

29-2215A - Ditto - (P/C) metre 212.00

29-2216A - Ditto - die no -9988 grove cover 90-95 mm (Silver) metre 281.00

29-2217A - Ditto - (Bronze) metre 293.00

29-2218A - Ditto - (Black) metre 299.00

29-2219A - Ditto - (P/C) metre 304.00

29-2220A - Ditto - die no -9989 plane cover (Silver) metre 178.00

29-2221A - Ditto - (Bronze) metre 184.00

29-2222A - Ditto - (Black) metre 184.00

29-2223A - Ditto - (P/C) metre 195.00
29-2224A - Ditto - die no -9998 wall frame (Silver) metre 441.00

29-2225A - Ditto - (Bronze) metre 448.00

29-2226A - Ditto - (Black) metre 460.00

29-2227A - Ditto - (P/C) metre 465.00

29-2228A Aluminium swing door section ALTECH die no -9500 metre 437.00
door shutter side (Silver)
29-2229A - Ditto - (Bronze) metre 442.00
29-2230A - Ditto - (Black) metre 454.00
29-2231A - Ditto - (P/C) metre 471.00
29-2232A - Ditto - die no -9498 door shutter top (Silver) metre 414.00
29-2233A - Ditto - (Bronze) metre 419.00
29-2234A - Ditto - (Black) metre 425.00
29-2235A - Ditto - (P/C) metre 431.00
29-2236A - Ditto - die no -9499 door shutter bottom (Silver) metre 448.00
29-2237A - Ditto - (Bronze) metre 460.00

701
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2238A - Ditto - (Black) metre 529.00
29-2239A - Ditto - (P/C) metre 569.00
29-2240A - Ditto - die no -9985A door closure section (Silver) metre 402.00

29-2241A - Ditto - (Bronze) metre 414.00

29-2242A - Ditto - (Black) metre 419.00
29-2243A - Ditto - (P/C) metre 431.00
29-2244A - Ditto - die no -9984 door closure cover (Silver) metre 155.00
29-2245A - Ditto - (Bronze) metre 161.00
29-2246A - Ditto - (Black) metre 161.00
29-2247A - Ditto - (P/C) metre 166.00
29-2248A - Ditto - die no -9497 door floor bottom (Silver) metre 431.00
29-2249A - Ditto - (Bronze) metre 431.00
29-2250A - Ditto - (Black) metre 454.00
29-2251A - Ditto - (P/C) metre 488.00
29-2252A - Ditto - die no -9999A door glass bit (Silver) metre 51.00
29-2253A - Ditto - (Bronze) metre 51.00
29-2254A - Ditto - (Black) metre 51.00
29-2255A - Ditto - (P/C) metre 57.00
29-2256A - Ditto - die no -9456 door handle (Silver) metre 563.00
29-2257A - Ditto - (Bronze) metre 580.00
29-2258A - Ditto - (Black) metre 580.00
29-2259A - Ditto - (P/C) metre 661.00
29-2260A - Ditto - die no -9975 fixed glass protector bit metre 57.00
29-2261A (Silver)
- Ditto -S (Bronze) S metre 57.00
29-2262A - Ditto - (Black) S metre 57.00
29-2263A - Ditto - (P/C) S metre 63.00
29-2264A - Ditto - die no -9976A fixed glass protector bit metre 86.00
(Silver) D
29-2265A - Ditto - (Bronze) D metre 86.00
29-2266A - Ditto - (Black) D metre 92.00
29-2267A - Ditto - (P/C) D metre 109.00

702
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2268A - Ditto - die no -4646 door divider (Silver) metre 230.00
29-2269A - Ditto - (Bronze) metre 230.00
29-2270A - Ditto - (Black) metre 241.00
29-2271A - Ditto - (P/C) metre 247.00
29-2272A - Ditto - die no -4646 door wall side (Silver) metre 224.00
29-2273A - Ditto - (Bronze) metre 230.00
29-2274A - Ditto - (Black) metre 235.00
29-2275A - Ditto - (P/C) metre 247.00
29-2276A Ditto - die no -9967 -100mm louver- Z (Silver) metre 258.00
- Ditto - (Bronze) metre 264.00
- Ditto - (Black) metre 264.00
- Ditto - (P/C) metre 258.00
29-2277A Ditto - die no -9769-100mm louver -U metre 184.00
- Ditto - (Bronze) metre 184.00
- Ditto - (Black) metre 195.00
- Ditto - (P/C) metre 195.00
New items

29-2278A Sink (White) size 515x430x275mm each 2,654.00

Ditto Sink (White) Size 625x490x224 mm each 2,816.00

29-2279A Sink with single draining board (Foreign made) each 3,549.00

- Ditto - (Sink with double draining board) each 7,281.00

29-2281A Rawl plug nos 0.70

29-2282A 1.00 cu.m Earth cu. m 170.00

29-2283A Rolling charge / rent 10/12 Ton hour 687.00

703
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2284A Nut & Bolts kg 108.00

29-2285A Shuttering sides 11x2x15 metre x 350 Sqm 149.00

29-2286A Mobilization and demobilization of testing equipment by truck 2,060.00

Truck (5 ton)

29-2287A Fire Clay kg 20.00

29-2288A Wood Screw 50 mm long gross 166.00

29-2289A Boarding 12.50 mm thick on side chamble mtr 1,250.00

-Ditto- Jessore Teak mtr 1,525.00

29-2290A 31mm dia PVC waste water pipe 300mm long nos 82.00

29-2291A 12.50 mm dia plastic connection & nipple 600 mm long nos 98.00

29-2292A Chain & plug 300 mm long nos 143.00

29-2293A 31 mm dia PVC flush pipe 750 mm long nos 178.00

29-2294A uPVC Pipe 75mm Bore mtr 92.00

29-2295A -Do-32x1.6mm gde-e uPVC pipe mtr 55.00

29-2296A -Do-Pipe 100mm Bore mtr 126.00

29-2297A Reinforced cement concrete pipes (non-pressure) 100mm m 194.00

bore
- Ditto - 150mm bore m 275.00

- Ditto - 225mm bore m 429.00

- Ditto - 300mm bore m 630.00

29-2298A Reinforced cement concrete pipes 375 mm Bore m 938.00

(37.5mm thick)
29-2299A Reinforced cement concrete pipes 450 mm Bore m 1,328.00
(62.5mm thick)
29-2300A Vantilation pipe 50mm Bore type of pipe wall thick m 790.00

29-2301A Vantilation pipe 100mm Bore type of pipe wall thick m 1,472.00

- Ditto - 100mm bore type of pipe wall thick m 1,660.00

29-2302A uPVC pipe 250mm Bore 18 mm thick m 1,717.00

- Ditto - 300mm bore 12mm thick m 2,862.00

29-2303A Reinforced cement concrete pipes 750 mm Bore (75mm thick)

m 2,748.00

-Do-900 mm Bore (100mm thick) m 4,663.00

704
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

-Do- 1200 mm Bore (125mm thick) m 9,388.00

29-2304A Clamp for fixing of pipe with rawl plug & screws each 17.00

29-2305A For 150 mm RCC/250mm Birck wall (Excavation) cu. m 297.00

29-2306A Wooden plank Mango (using 6 times) cu. m 35.00

29-2307A Bed joint heavy type B/Q set 251.00

29-2308A Screw nos 9.00

29-2309A Jute Bag 1.00 kg nos 29.00

29-2310A Nut & Bolts nos 35.00

29-2311A Cloth Molmol metre 35.00

29-2312A Water proof sand paper nos 51.00

29-2313A Brass hook nos 68.00

29-2314A Sutly kg 68.00

29-2315A F I bar [email protected]= kg 80.00

29-2316A Clamp with hole for hanging nos 86.00

29-2317A Lock for file cabinet no 286.00

29-2318A Back Foam ARCO-280/Karmo -2001 nos 423.00

29-2319A Cloth Best quality metre 515.00

29-2320A 12mm thick Partex board Sq m 552.00

29-2321A 19 mm thick partex board Sq m 578.00

29-2322A Foam nos 630.00

29-2323A Cloth for Foam Cover B/Q metre 630.00

29-2324A Back Foam 55x45x7.5 (ARCO-280)/Karmo-2001 nos 652.00

29-2325A Cover for Mattress double ARCO-280/karmo-2001 nos 705.00

29-2326A 5 mm thick glass (Colour) -(NGIL) local Sq m 802.00

29-2327A Seat foam 55x55x10 (ARCO-280)/Karmo-2001 nos 859.00

29-2328A Gasket /rope wire kg 103.00

29-2329A Solutions / aica foreign made kg 1,250.00

29-2330A Lead kg 240.00

705
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2331A General steel vent for clamp (25x3mmFI Bar)= mtr 143.00

29-2332A Bamboo for platform (using 6 times) 100mm dia mtr 35.00

29-2333A Rope (using 6 times) kg 57.00

29-2334A Screw brass 25 mm long no 4.00

29-2335A Staple/Nail etc kg 118.00

29-2336A FI bar 19x3 mm holdfast kg 80.00

29-2337A Cement morter (1:3) for pointing Sq m 55.00

29-2338A Iron Screw 25 mm long doz 8.00

29-2339A Water closet incl seat cover (Star Ceramic) No 4,247.00

29-2340A Water closet incl seat cover (Orient) No 4,637.00

29-2341A Water closet incl seat cover (Washington) No 7,362.00

29-2342A Water closet incl seat cover (Venice) No 10,568.00

29-2343A Water tank with flushing No 2,415.00

29-2344A Water tank with flushing (Orient) No 3,349.00

29-2345A Water tank with flushing (Washington) No 3,584.00

29-2346A Water tank with flushing (Venice) No 3,800.00

29-2347A Plastic seat cover (Hammar) No 1,317.00

29-2348A Plastic seat cover (Local) Nos 859.00

29-2349A Combi closet (White) Nos 7,488.00

29-2350A Combi closet (Coloured) Nos 8,793.00

29-2351A Combi closet (Special coloured) Nos 9,943.00

29-2352A Combi closet Complete set (Karala) Nos 6,423.00

29-2353A Combi closet Complete set (Orient) Nos 9,010.00

29-2354A CI bracket pair 366.00

29-2355A CP basin waste with brass coupling Nos 366.00

29-2356A 12.50 mm dia CP pillar cock Nos 1,041.00

29-2357A Tee 50mm Bore uPVC (50x2.40) Nos 104.00

29-2358A Plain Tee 50mm Bore uPVC (50x2.40) Nos 304.00

706
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2359A Plain Tee 100mm Bore uVPC (110x3.40) Nos 790.00

29-2360A Tee 100mm Bore UPVC (110x3.40) Nos 286.00

29-2361A Tee 150mm Bore uPVC (150x4.80) Nos 916.00

29-2361A Door type Tee 50mm Bore uPVC (50x2.40) Nos 343.00

29-2362A Door type Tee 100mm Bore uPVC (110.3.40) Nos 859.00

29-2363A Plain Bend 50mm Bore uPVC (50x3.40) No 339.00

29-2364A Plain Bend 100mm Bore uPVC (50x3.40) No 458.00

29-2365A Door Bend 50mm Bore uPVC (50x2.40) No 343.00

29-2366A Ditto 100mm Bore uPVC (110x3.40) No 480.00

29-2367A 100mm Bore branch pieces uPVC (110x3.40) No 9,010.00

29-2368A CI floor trap 100mm Bore uPVC (110x3.40) No 779.00

29-2369A Materials Guard cowl 50mm Bore uPVC (50x2.40) No 126.00

29-2370A -Do- Guard cowl 100mm Bore uPVC (110x3.40) No 229.00

29-2371A -Do- Manhole cover 375mm dia (Havy type) No 1,030.00

29-2372A -Do- Manhole cover 450mm dia (Havy type) No 1,489.00

29-2373A -Do- Manhole cover 525mm dia (Havy type) No 1,889.00

29-2374A Brick work in CM (1:4) cu. m 6,619.00

29-2375A Steel Reinforcement kg 75.00

29-2376A Screw wood steel 38 mm kg 0.86

29-2377A Side Foam 55x55x5 Sq m 400.00

29-2378A Cloth for Foam Cover B/Q mtr 859.00

29-2379A MS leg stoper 75x3.12) mm mtr 57.00

29-2380A Hard ware (Nails, screw) kg 103.00

29-2381A Screw 25 mm long steel kg 92.00

29-2382A Water barrier (Berger-Robbialac) Litre 180.00

29-2383A Roofing compound (Berger Robbialac) Litre 373.00

29-2384A 6mm thick Murcury glass (Foreign made) Sq.M 2,650.00

29-2385A 10mm thick clear glass (Foreign made) Sq.M 4,500.00

707
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2386A Various size of Joist kg 90.00

29-2387A Various size of `U' channel kg 85.00

29-2388A Purine/Angle (Off size) kg 78.40

29-2389A Deformed bar BDS grade 500 (72000psi) kg 68.32

29-2390A Zink aloy sheet 0.46 mm thick Sq.M 675.00

29-2391A -Do- Ridge Sq.M 750.00

29-2392A -Do-Gutter Sq.M 750.00

29-2393A Rain Water droping duct metre 600.00

29-2394A Exterior wall putty (RAK) kg 75.00

29-2395A Interior wall putty (RAK) kg 65.00

29-2396A Pilling Crews Nos 450.00

29-2397A Ballah Sal 6 metre 150 mm girth metre 445.00

29-2398A Mega flow SP-402 kg 203.00

29-2399A Alumium Swing door section 998A door claser (Silver meter 400.00
Colour)
29-2400A Dursban 20EC (BCCL) Leter 1,233.00

29-2401A Glass sheet 3mm thick (local) Sqm 370.00

29-2402A Glass sheet 5mm thick (China) Sqm 1,007.00

29-2403A Gum Arabic kg 445.00

29-2404A MS Angle 19x19x3mm kg 80.00

29-2405A Plastic wire Net 7x7 mesh sqm 377.00

29-2406A Yale lock (Japan/Italy/England each 3,200.00

29-2407A Brass handle for steel window Doz 1,200.00

29-2408A SS Tower bolts 150mm long (heavy) Doz 2,500.00

29-2409A Net gauges woven plastic wire (mosquite proof 18x18 Sqm 240.00
mesh)
29-2410A Paint Alumium Berger Robbilac Liter 293.00

29-2411A SS Pipe 75mm dia 1.5mm thick meter 1,010.00

29-2412A Sand FM 0.80 (Unwashed) Cum 480.00

29-2413A Ceramic glazed tiles floor (300x300) MIR Sqm 490.00

708
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2414A MS Squar solied bass 12x12 mm size of Approved Kg 69.44
quality
29-2415A Deformed bas yeld strength 72,000 psi BDS grade 500 Kg 52.31
(496-500 N unit) of “Purbachal steel Mill Ltd” Products.

29-2416A Glazed/Matt wall Tiles 200x300mm size of “Star Sq.M 460.00

Ceramic Ltd” Products (Code No.2300 WH, 2306 BE,
2310 BR and 2358 DRB)

29-2417A Glazed/Matt wall Tiles 200x300mm size of “Star Sq.M 668.00

Ceramic Ltd” Products (Code No.2300 WH, 2306 BE,
2310 BR and 2358 DRB) but floor Glazed Tiles
305x305mm size. Code no.GPG-3300WH, GPG-33004
WH, 33005 LBE, GPG-33006 LBL, GPG-33009 DBR,
GPG-33018 BE, GPG-33051 DBE, GPG-33204 LGR,
GPG-33208 WH, GPG-33210 DRG, GPG-332121 LBE
& GPG-33407 BE.
29-2418A Wall Tiles star Graphic 200x500mm size of “Star Sq.M 775.00
Ceramic Ltd” product. Code no.25704 PK, 25712
SGBE, 25714 SGGY & 25716 SGBE.

29-2416A Homogeneous Glazed Tiles floor of “Star Ceramic Ltd” Sq.M 721.20
products. 400x400mm size. Code no. GPG-44000 WH,
GPG-44000 YE, GPG-4405 IV, GPG-44025 BL, GPG-
44040 GYPE and GPG-44407 WBE.

29-2419A Homogeneous un glazed Tiles floor of “Star Ceramics Sq.M 904.00

Ltd” products. 600x600mm size. Code no. 66656
MTLBR.
29-2420A Polished Tiles-“Clasic” Crystal 600x600mm size of Sq.M 1,090.00
“Star Ceramics Ltd” products. 66000 GPCC,
x66314GPCC-GY and 66337 GPCC-IV.

29-2421A Décor tiles (Embosed) 324x494mm size of “Star Sq.M 990.00

Ceramic Ltd” products.

29-2422A Border Tiles (Printed) 77x550mm size of “Star Ceramic Sq.M 3,000.00
Ltd” products.

29-2423A Namo-Crystal mirror polished Tiles 600x600mm size of Sq.M 1,271.00

“Star Ceramic Ltd” products. Code no. 66000 PNC Bk.

29-2424A Namo-Crystal mirror polished Tiles 600x1200mm size Sq.M 2,664.00

of “Star Ceramic Ltd” as spd.

709
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2425A Glazed Homogeneous floor Tiles 400x400mm size of Sq.M 1,076.00
“Star Ceramic Ltd” Products.

29-2426A Sealer water base “Premium emulsion (Plastic) of “Asian Liter 302.00
pants Ltd”.

29-2427A Exterior primer sealer of “Asian paints Bangladesh Ltd” Liter 210.00
product.
29-2428A Apex weather proof exterior emulsion paints (weather Liter 210.00
coat) of “Asian paints Bangladesh Ltd” product.

29-2429A Wall putty of “Asian Paints Bangladesh Ltd” products. Kg 76.00

29-2430A Acrylic distemper of “Asian paints Bangladesh Ltd” Liter 104.00

products.
29-2431A Apcolite premium emulsion plastic paints of “Asian Liter 268.00
paints Bangladesh Ltd” products.

29-2432A Asian pan (Lotas) of “Abul Khair ceramic Industries Ltd” Set 1,253.00
Products. (with water Tank) 2,190.00
3,443.00
29-2433A Asian pan (ORCHID) with water tank of “Abul Khair Set 1,958.00
ceramic Industries Ltd” Products. 2,190.00
4,148.00

710
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2434A Glazed porcelain European water closet low down cistern Set
5,710.00
(VERSO) of “Abul Khair ceramic Industries Ltd” 2,190.00
Products. 7,900.00
29-2435A Glazed porcelain European water closet low down cistern (VERSO)
Set of “Abul Khair ceramic Industries L
4,800.00
2,650.00
7,450.00
29-2436A Glazed porcelain combi closet (VIOLA) any colour of Set 24,750.00
“Abul Khair ceramic Industries Ltd” Products.

29-2437A Glazed porcelain wash hand basin (VERSO) of “Abul Each 2,745.00
Khair ceramic Industries Ltd” Products.

29-2438A Glazed porcelain wash hand basin Padestal (SOFIA) of Set 1,715.00
“Abul Khair ceramic Industries Ltd” Products. 1,125.00
2,840.00
29-2439A Glazed porcelain counter basin with Marble shade (JINATA) Each 3,206.00
of “Abul Khair ceramic Industries Ltd” Products.

29-2440A Glazed porcelain water closed with water Tank & marble shade Set 8,470.00
(ROSELA) of “Abul Khair ceramic Industries Ltd” Products.

29-2441A Stainless angle as spd. 25 mmX 25mm 2 mm thick mtr 360.00

29-2442A Stainless Angle as spd.19 mm X19mm dia 2 mm thick mtr 265.00

29-2443A S.S pipe 19mm X dia 2mm thick no 350.00

29-2444A Screw mudguard 20mm no 25.00

29-2445A Silicon water repellent paint (Berger Robbialac) ltr 240.00

29-2446A Runner 4.50 Nos x 3.00 m x 75 mm x 38 mm using cum 20,500.00

6time)
29-2447A Coloured cement kg 60.00

29-2448A Pesting cement kg 30.00

29-2449A floor Tiles size 600x600mm incl. 2.5% tollerance Sqm 1,800.00

29-2450A PVC Trap (Heavy type) Set 583.00

29-2451A Stone dust Kg 2,000.00

29-2452A Rivet Doz 14.00

29-2453A Tower Botol 15 cm long Nos 1,840.00

29-2454A Polythine sqm 207.00

711
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2455A Carfa sqm 458.00

29-2456A Oak Wood Per Cum 143,200.00

29-2457A Oak/ Equivalent Veneered 36 mm thick Sqm 1,900.00

29-2457A Oak/Equivalent Veneered 18 mm thick Sqm 1,740.00

29-2458A Proces/Eng. wood 18 mm thick Sqm 1,560.00

29-2459A Proces/Eng. wood 30 mm thick Sqm 2,200.00

29-2460A Process/Eng. wood 2 side veneered 25 mm thick Sqm 1,883.00

29-2461A Red Oak/Equivalent process/Engineer wood 15 mm thick Sqm 1,450.00

29-2462A Proces/Eng. wood 12 mm thick Sqm 1,350.00

29-2463A Proces/Eng. wood 3 mm thick Sqm 645.00

29-2464A Oak/Equivalent Proces/Ply wood 4mm thick Sqm 375.00

29-2465A Bed Plank (ply wood 15 mm thick) Sqm 500.00

29-2466A Bite Suta Sqm 150.00

29-2458A Bed joint for long rail Sqm 125.00

29-2459A Back Cover & Dust Cover Sqm 94.00

29-2460A Black Marking mtr 40.00

29-2461A Bush Nut 6/8 mm nos 7.00

29-2462A Bolt 6X50 mm Set 6.00

29-2463A Bolt 6X70 mm nos 20.00

29-2464A Bolt 6X120 mm nos 35.00

29-2465A Bolt 8 x 95 mm nos 50.00

29-2466A Box 50 X 25 mm mtr 155.00

29-2467A Clear glass 5 mm thick (Forgin made) cum 27,065.00

29-2468A Coir mattress 2000 x 850 x38 mm nos 3,000.00

29-2469A Clear glass 5 mm thick ltr 1,600.00

29-2470A Coir Mattress 2000X850X38 mm nos 2,000.00

29-2471A Coffee color glass 8 mm thick Sqm 2,000.00

29-2472A Clear glass 8 mm thick cum 1,400.00

712
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2473A Lacquer/Polish Material ltr 1,600.00

29-2474A Foam cum 27,065.00

29-2475A Foam semi rubber cum 18,500.00

29-2476A Foam semi rubber cum 21,600.00

29-2477A Foam Supper cum 22,000.00

29-2478A Oak Veneered 18mm Sqm 1,740.00

29-2479A MDF Board 18mm Sqm 2,100.00

29-2480A Engineering wood 18mm Sqm 4,500.00

29-2481A Engineering wood 25mm Sqm 4,850.00

29-2482A Engineering wood 12mm Sqm 2,450.00

29-2483A Oak Veneered 25mm Sqm 2,800.00

29-2484A MDF Board 25mm Sqm 2,580.00

29-2485A Lacquered Polish Per Ltr 1,600.00

29-2486A RK/New Delux polli foam cum 16,000.00

29-2487A RK/New Delux semi rubber foam cum 18,700.00

29-2488A RK/New Delux rubber foam cum 25,700.00

29-2489A Glass colour 5mm thick Sqm 2,150.00

29-2490A Glass colour 8mm thick Sqm 3,230.00

29-2491A Glass natural colour 10mm thick with grainding Sqm 4,850.00

29-2492A Receptacle small (Plastic) Each 800.00

29-2493A Receptacle large (Plastic) Each 1,300.00

29-2494A Plastic chair (Easy) Each 1,200.00

29-2495A Chair (Computer) Each 5,280.00

29-2496A Steel plate 6 mm thick 4x200x175 mm Sqm 60.00

29-2497A 16 mm dia MS rod connected with MS plate 5x.75 m kg 65.00

29-2498A Insulation Bubble Sqm 185.00

29-2499A 36 mm thick solid wooden door shutter Sqm 27,850.00

29-2500A Brass mongeries complete Set 1,800.00

713
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2501A SS mongeries complete Set 760.00

29-2502A Aluminium frame with cleat mtr 90.00

29-2503A Layer brick flat soling Sqm 312.00

29-2504A Boarding Chamble Sqm 3,796.00

29-2505A Boarding Gamar (Ctg.) Sqm 2,287.00

29-2506A Boarding Garjan Sqm 2,125.00

29-2507A Boarding Shilcorai (Ctg) Sqm 2,845.00

29-2508A Boarding Jessore Teak Sqm 2,632.00

29-2509A Boarding Tit Chamble Sqm 4,350.00

29-2510A Boarding Chitagong Teak Sqm 5,386.00

29-2511A Boarding Kathal Sqm 4,536.00

29-2512A Boarding Jarul Sqm 2,668.00

29-2513A Boarding Shisham Sqm 2,820.00

29-2514A Foam Arco-280 / Karmo-2001, 100mm thick (150x2.13mm)Each 7,280.00

29-2515A Foam Arco-280 / Karmo-2001, 100mm thick (1.22x2.13mm)

Each 6,272.00

29-2516A Foam Arco-280 / Karmo-2001/Swan Supper/RK- Sqm 504.00

2001/Apex-2000 Swan etc 12.50mm size
(1800x900mm)
29-2517A Foam Arco-280 /Swan Supper/RK-2001/Apex- Sqm 1,008.00
2000/Swan etc 25mm size (1800x900mm)

29-2518A Foam Arco-280 /Kermo-2001/Swan Supper/RK- Sqm 2,016.00

2001/Apex-2000/Swan etc 50mm size (1800x900mm)

29-2519A Foam any thickness Cum 23,971.00

29-2520A Foam Amar-280 size (550x450x75m) Sqm 2,820.00

29-2521A Foam Amar-280 size (550x550x100m) Each 776.00

29-2522A Foam Appex-2000 size (550x550x100mm) Each 779.00

29-2523A Foam Appex-2000 size (550x450x75mm) Each 478.00

29-2524A Foam Kermo-2000 size (550x450x75mm) Each 462.00

29-2525A Foam Arco-280/kermo-2001 size (550x550x100mm) Each 753.00

714
RESTRICTED
 RESTRICTED
SECTION - 29
BUILDING, ROAD, LANDING GROUND, FURNITURE ETC
PART-I

Item No Description of Materials Unit Rate in Taka Remarks

29-2526A Foam Swan supper (550x450x75mm) Each 476.00

29-2527A Foam Swan supper (550x550x100mm) Each 776.00

29-2528A RK-3D Gold spl Rubber Foam size (550x450x75mm) Each 502.00

29-2529A RK-3D Gold spl Rubber Foam size (550x550x100mm) Each 818.00

29-2530A RK-2001 Rubber Foam size (550x450x75mm) Each 462.00

29-2531A RK-2001 Rubber Foam size (550x550x100mm) Each 753.00

29-2532A Foam Mattress with cover 100mm thick size Each 8,690.00
(1.52x2.13m) RK-2001/Appex-2000/Swan
supper/Kermo-2001 etc.
29-2533A Foam Mattress with cover 100mm thick size Each 6,474.00
(1.22x2.13m) RK-2001/Appex-2000/Swan
supper/Kermo-2001 etc.

29-2534A Foam Mattress spring with cover 200mm thick size Each 15,400.00
(1.52x2.13m)
29-2535A Foam Mattress spring with cover 200mm thick size Each 11,000.00
(1.066x2.13m)

715
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3701 Distribution Power

Transformer 11/.4 KV, 3 50 KVA Energypac Each 331,250.00
Phase, 50 HZ

29-3702 - Ditto - but for 50 KVA GEC Each 307,400.00

29-3703 - Ditto - but for 50 KVA GEM Each 279,500.00

29-3704 - Ditto - but for 50 KVA Micro Each -

29-3705 - Ditto - but for 50 KVA Each -

29-3706 - Ditto - but for 100 KVA Energypac Each 477,000.00

29-3707 - Ditto - but for 100 KVA GEC Each 477,000.00

29-3708 - Ditto - but for 100 KVA GEM Each 333,250.00

29-3709 - Ditto - but for 100 KVA Micro Each 394,320.00

29-3710 - Ditto - but for 100 KVA BETELCO Each 347,388.00

29-3711 - Ditto - but for 200 KVA Energypac Each 662,500.00

29-3712 - Ditto - but for 200 KVA GEC Each 662,500.00

29-3713 - Ditto - but for 200 KVA GEM Each 510,625.00

29-3714 - Ditto - but for 200 KVA Micro Each 534,240.00

29-3715 - Ditto - but for 200 KVA BETELCO Each 509,800.00

29-3716 - Ditto - but for 250 KVA Energypac Each 795,000.00

29-3717 - Ditto - but for 250 KVA GEC Each 768,500.00

29-3718 - Ditto - but for 250 KVA GEM Each 632,000.00

29-3719 - Ditto - but for 250 KVA Micro Each 623,280.00

29-3720 - Ditto - but for 250 KVA BETELCO Each 586,600.00

29-3721 - Ditto - but for 300 KVA Energypac Each 993,750.00

29-3722 - Ditto - but for 300 KVA GEC Each 927,500.00

29-3723 - Ditto - but for 300 KVA GEM Each 731,000.00

604
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3724 - Ditto - but for 300 KVA Micro Each 693,240.00

29-3725 - Ditto - but for 300 KVA BETELCO Each -

605
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3726 - Ditto - but for 400 KVA Energypac Each 1,125,720.00

29-3727 - Ditto - but for 400 KVA GEC Each 1,038,000.00

29-3728 - Ditto - but for 400 KVA GEM Each -

29-3729 - Ditto - but for 400 KVA Micro Each 814,000.00

29-3730 - Ditto - but for 400 KVA BETELCO Each 720,400.00

29-3731 - Ditto - but for 500 KVA Energypac Each 1,258,750.00

29-3732 - Ditto - but for 500 KVA GEC Each 1,240,200.00

29-3733 - Ditto - but for 500 KVA GEM Each 1,010,500.00

29-3734 - Ditto - but for 500 KVA Micro Each 915,840.00

29-3735 - Ditto - but for 500 KVA BETELCO Each 940,400.00

29-3736 - Ditto - but for 630 KVA Energypac Each 1,590,000.00

29-3737 - Ditto - but for 630 KVA GEC Each 1,653,600.00

29-3738 - Ditto - but for 630 KVA GEM Each -

29-3739 - Ditto - but for 630 KVA Micro Each 1,074,840.00

29-3740 - Ditto - but for 750 KVA Energypac Each 1,590,000.00

29-3741 - Ditto - but for 750 KVA GEC Each 1,855,000.00

29-3742 - Ditto - but for 750 KVA GEM Each -

29-3743 - Ditto - but for 750 KVA Micro Each 1,237,000.00

29-3744 - Ditto - but for 750 KVA BETELCO Each -

29-3745 - Ditto - but for 800 KVA Energypac Each 1,987,500.00

29-3746 - Ditto - but for 800 KVA GEC Each 1,855,000.00

29-3747 - Ditto - but for 800 KVA BETELCO Each -

29-3748 - Ditto - but for 800 KVA Micro Each 1,399,200.00

29-3749 - Ditto - but for 1000 KVA Energypac Each 2,318,750.00

606
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3750 - Ditto - but for 1000 KVA GEC Each 2,279,000.00

29-3751 - Ditto - but for 1000 KVA GEM Each 1,200,000.00

29-3752 - Ditto - but for 1000 KVA Micro Each 1,844,400.00

29-3753 - Ditto - but for 1000 KVA BETELCO Each -

607
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3754 - Ditto - but for 1250 KVA Energypac Each 2,517,500.00

29-3755 - Ditto - but for 1250 KVA GEC Each 2,745,000.00

29-3755A - Ditto - but for 1250 KVA Micro Each 2,276,900.00

29-3756 - Ditto - but for 1500 KVA Energypac Each 3,047,500.00

29-3757 - Ditto - but for 1500 KVA GEC Each 3,657,000.00

29-3757A - Ditto - but for 1500 KVA Micro Each 2,779,300.00

29-3758 - Ditto - but for 2000 KVA Energypac Each 3,378,750.00

29-3759 - Ditto - but for 2000 KVA GEC Each 4,770,000.00

29-3759A - Ditto - but for 2000 KVA Micro Each 3,377,200.00

29-3760 - Ditto - but for 2500 KVA Energypac Each 4,438,750.00

29-3761 - Ditto - but for 2500 KVA GEC Each -

29-3762 Distribution Power
Transformer 6.35/.24 10 KVA GEC Each -
KV, Single Phase, 50 HZ

29-3763 - Ditto - but for 10 KVA GEM Each 106,657.00

29-3764 - Ditto - but for 15 KVA GEC Each -

29-3765 - Ditto - but for 15 KVA GEM Each 118,720.00

29-3766 - Ditto - but for 25 KVA GEC Each -

29-3767 - Ditto - but for 25 KVA GEM Each 166,625.00

29-3768 - Ditto - but for 37.5 KVA GEC Each -

29-3769 - Ditto - but for 37.5 KVA GEM Each -

29-3770 - Ditto - but for 50 KVA GEC Each -

29-3771 - Ditto - but for 50 KVA GEM Each -

608
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3772 Switchgear 11 KV, 3

Phase 50 Hz (HT)
complete with all 630 Amps GEC Each 400,000.00
accessories ( LBS )
without KWH Meter
29-3773 - Ditto - but for 630 Amps GEM Each -

29-3774 - Ditto - but for 630 Amps Energypac Each 490,000.00

29-3775 - Ditto - but for 630 Amps Micro Each 372,800.00

609
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3776 Switchgear (HT) 11 KV,

3 Phase 50 Hz complete
with all accessories VCB 630 Amps GEC Each 750,000.00
(Fixed) without KWH
Meter
29-3777 - Ditto - but for 630 Amps Each -

29-3778 - Ditto - but for 630 Amps Energypac Each 890,000.00

29-3779 - Ditto - but for 630 Amps Micro Each 880,000.00

29-3780 Switchgear (HT) 11 KV,
3 Phase 50 Hz complete
with all accessories 630 Amps GEC Each 850,000.00
(VCB Drawout) without
KWH Meter

29-3781 - Ditto - but for 630 Amps Each -

29-3782 Switchgear (HT) 11 KV,
3 Phase 50 Hz complete
with all accessories 630 Amps GEC Each -
(MOCB) without KWH
Meter
29-3783 - Ditto - but for 630 Amps GEM Each -

29-3784 - Ditto - but for 630 Amps Energypac Each -

29-3785 - Ditto - but for 630 Amps Micro Each -

29-3786 Switch gear LT 440 Volt

3 Phase 50 Hz complete 100 Amps Energypac Each 161,607.00
with cubical & MCCB

29-3787 - Ditto - but for 200 Amps Each -

29-3788 - Ditto - but for 100 Amps Micro Each 95,600.00

29-3789 - Ditto - but for 200 Amps Energypac Each 181,518.00

29-3790 - Ditto - but for 200 Amps GEC Each 250,000.00

29-3791 - Ditto - but for 200 Amps Micro Each 115,500.00

29-3792 - Ditto - but for 300 Amps Energypac Each 220,300.00

29-3793 - Ditto - but for 300 Amps GEC Each 308,000.00

29-3794 - Ditto - but for 300 Amps Micro Each 165,000.00

610
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3795 - Ditto - but for 400 Amps Energypac Each 272,200.00

611
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3796 - Ditto - but for 400 Amps GEC Each 305,000.00

29-3797 - Ditto - but for 400 Amps Micro Each 210,000.00

29-3798 - Ditto - but for 500 Amps Energypac Each 315,500.00

29-3799 - Ditto - but for 500 Amps GEC Each 365,000.00

29-3800 - Ditto - but for 500 Amps Micro Each 240,000.00

29-3801 - Ditto - but for 600 Amps Energypac Each 347,000.00

29-3802 - Ditto - but for 600 Amps GEC Each 364,500.00

29-3803 - Ditto - but for 600 Amps Each -

29-3804 - Ditto - but for 600 Amps Micro Each 272,000.00

29-3805 - Ditto - but for 800 Amps Energypac Each 462,000.00

29-3806 - Ditto - but for 800 Amps GEC Each 398,000.00

29-3807 - Ditto - but for 800 Amps Each -

29-3808 - Ditto - but for 800 Amps Micro Each 304,000.00

29-3809 - Ditto - but for 1000 Amps Energypac Each 597,000.00

29-3810 - Ditto - but for 1000 Amps GEC Each 512,000.00

29-3811 - Ditto - but for 1000 Amps Micro Each 373,000.00

29-3812 - Ditto - but for 1250 Amps Energypac Each 624,000.00

29-3813 - Ditto - but for 1250 Amps GEC Each 658,000.00

29-3814 - Ditto - but for 1250 Amps Micro Each 886,000.00

29-3815 - Ditto - but for 1600 Amps Energypac Each 878,000.00

29-3816 - Ditto - but for 1600 Amps GEC Each 769,000.00

29-3817 - Ditto - but for 2000 Amps Energypac Each 1,130,000.00

29-3818 - Ditto - but for 2000 Amps GEC Each 1,142,000.00

612
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3819 - Ditto - but for 2500 Amps Energypac Each 1,297,000.00

29-3820 - Ditto - but for 2500 Amps GEC Each 1,199,000.00

613
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3821 Auto PFI (L T) 440 Volt

3 Phase 50 Hz complete 20 KVAr GEC Each 135,360.00
with all accessories &
Cubical
29-3822 - Ditto - but for 30 KVAr Energypac Each 165,360.00

29-3823 - Ditto - but for 40 KVAr GEC Each 170,950.00

29-3824 - Ditto - but for 40 KVAr Energypac Each 209,867.00

29-3825 - Ditto - but for 60 KVAr GEC Each 235,400.00

29-3826 - Ditto - but for 60 KVAr Energypac Each 226,670.00

29-3827 - Ditto - but for 80 KVAr GEC Each 260,000.00
29-3828 - Ditto - but for 90 KVAr Energypac Each 284,928.00
29-3829 - Ditto - but for 100 KVAr GEC Each 361,533.00
29-3830 - Ditto - but for 100 KVAr Energypac Each 353,663.00
29-3831 - Ditto - but for 90 KVAr Micro Each 192,097.00
29-3832 - Ditto - but for 125 KVAr GEC Each 328,600.00
29-3833 - Ditto - but for 120 KVAr Energypac Each 356,160.00
29-3834 - Ditto - but for 120 KVAr Micro Each 247,500.00
29-3835 - Ditto - but for 160 KVAr GEC Each 475,210.00
29-3836 - Ditto - but for 160 KVAr Energypac Each 516,833.00
29-3837 - Ditto - but for 160 KVAr Micro Each 265,661.00
29-3838 - Ditto - but for 200 KVAr GEC Each 535,081.00
29-3839 - Ditto - but for 200 KVAr Micro Each 313,558.00
29-3840 - Ditto - but for 190 KVAr Energypac Each 457,920.00
29-3841 - Ditto - but for 190 KVAr Micro Each 260,000.00
29-3842 - Ditto - but for 300 KVAr GEC Each 711,979.00
29-3843 - Ditto - but for 300 KVAr Micro Each 430,584.00
29-3844 - Ditto - but for 300 KVAr Energypac Each 809,497.00
29-3845 - Ditto - but for 300 KVAr Micro Each 345,000.00
29-3846 - Ditto - but for 400 KVAr GEC Each 665,000.00
29-3847 - Ditto - but for 400 KVAr Each -
29-3848 - Ditto - but for 400 KVAr Energypac Each 610,000.00
29-3849 - Ditto - but for 400 KVAr Micro Each 405,000.00

614
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3850 - Ditto - but for 500 KVAr GEC Each 820,000.00

29-3851 - Ditto - but for 500 KVAr Energypac Each 973,080.00
29-3852 - Ditto - but for 40 KVAr Micro Each 132,034.00

615
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
HT / LT EQUIPMENTS

Description of
Item no Capacity Brand Unit Rate in Taka Remarks
Equipments

29-3853 Energy Meter with panel Energypac /

11 KV, 3 Phase (HT) 630 Amps ELSTER Each 312,405.00
(USA)
29-3854 - Ditto - but for 630 Amps GEM Each 273,158.00

29-3855 - Ditto - but for 630 Amps Other Brand Each 260,150.00
29-3856 Disconnector / Isolator
11 KV, TP for 3 Ph 320 Amps GEC Each 41,388.00
System

29-3857 - Ditto - but for 320 Amps GEM Each 35,422.00

29-3858 - Ditto - but for 320 Amps Other Brand Each 49,680.00

29-3859 Lightning arrestor 9 - 11 KV GEC Each 6,576.00

29-3860 - Ditto - but for 9 - 11 KV GEM Each 1,892.00

29-3861 - Ditto - but for 9 - 11 KV Other Brand Each 1,870.00

29-3862 Drop out Fuse 11 KV 100 Amps GEC Each 6,136.00

29-3863 - Ditto - but for 100 Amps GEM Each 3,105.00

29-3864 - Ditto - but for 100 Amps Other Brand Each 2,365.00

29-3865 Transformer oil Litre 226.00

29-3866 to
Blank
29-3900

616
RESTRICTED
 RESTRICTED
SECTION-29

RATES OF MATERIALS ONLY (With Carrying Charges)

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

TUBINGS
29-3901 Water Tube (GI) Brand National Tubes Ltd, Size Metre 144.00
(Bore & thickness) 12.5x2 mm
29-3902 -Ditto-but 18.7x2.35 mm Metre 213.00
29-3903 -Ditto-but 25x2.65 mm Metre 301.00
29-3904 -Ditto-but 37.5x2.90 mm Metre 471.70
29-3905 -Ditto-but 50x2.90 mm Metre 567.10
29-3906 -Ditto-but 75x3.25 mm Metre 973.00
29-3907 -Ditto-but 100x3.65 mm Metre 1,499.00
29-3908 -Ditto-but 150x4.85 mm Metre -
29-3909 -Ditto-but 200x4.78 mm Metre -
29-3910 Water Tube (GI) Brand Other than National tubes Metre 141.00
ltd, Size 12.5x2 mm

29-3911 -Ditto-but 18.7x2.35 mm Metre 183.74

29-3912 -Ditto-but 25x2.65 mm Metre 230.00
29-3913 -Ditto-but 37.5x2.90 mm Metre 416.69
29-3914 -Ditto-but 50x2.90 mm Metre 518.00
29-3915 -Ditto-but 75x3.25 mm Metre 918.00
29-3916 -Ditto-but 100x4-4.2 mm (diamond) Metre 1,391.00
29-3917 -Ditto-but 150x4.85 mm Metre 2,500.00
29-3918 -Ditto-but 200x4.78 mm Metre 3,400.00
29-3919 Steam Tube (MS) Brand National tubes ltd, 12.5x2 Metre 107.00
mm dia
29-3920 -Ditto-but 18.7x2.35 mm Metre 165.00
29-3921 -Ditto-but 25x2.65 mm Metre 226.00
29-3922 -Ditto-but 37.5x2.90 mm Metre 365.00
29-3923 -Ditto-but 50x2.90 mm Metre 461.00
29-3924 -Ditto-but 75x3.25 mm Metre 675.00
29-3925 -Ditto-but 100x3.65 mm Metre 1,082.26
29-3926 -Ditto-but 150x4.85 mm Metre 2,225.00

611
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-3927 PVC Tube (Water grade) 13 mmx Gde E (thickness Metre 29.00
2.2mm)
29-3928 -Ditto-but 16 mm x T/S (Thread type) Metre 40.30
thickness 2.5mm
29-3929 -Ditto-but 20 mm x T/S (Thread type) Metre 42.00
thickness 3.5mm
29-3930 -Ditto-but 25 mm x T/S (Thread type) Metre 57.00
thickness 4.0mm
29-3931 -Ditto-but 30 mm x T/S (Thread type) Metre 80.00
thickness 4.5mm
29-3932 -Ditto-but 40 mm x T/S (Thread Type) Metre 130.00
thickness 4mm
29-3933 -Ditto-but 50 mm x 4.0 mm thick Metre 180.00
29-3934 -Ditto-but 75 mm x 6.0 mm thick Metre 297.00
29-3935 -Ditto-but 100 mm x 7.5 mm thick Metre 501.00
29-3936 -Ditto-but 150 mm x 10.50 mm thick Metre 1,166.00
29-3937 -Ditto-but 200 mm x 14.00 mm thick Metre 1,650.00
29-3938 -Ditto-but 250 mm x 10.00 mm thick Metre 1,774.00
29-3939 uPVC Tube 16 mm gde-E (thickness 3.2mm) Metre 32.00
29-3940 -Ditto-but 20 mm gde-E (thickness 3.5mm) Metre 47.00
29-3941 -Ditto-but 25 mm gde-E (thickness 4.0mm Metre 64.00
29-3942 -Ditto-but 30 mm x 4.5 mm thick Metre 87.00
29-3943 -Ditto-but 40 mm x 4.5 mm thick Metre 138.00
29-3944 -Ditto-but 50 mm x 4.5 mm thick Metre 191.00
29-3945 -Ditto-but 75 mm x 6.0 mm thick Metre 340.00
29-3946 -Ditto-but 100 mm 8.0 mm thick Metre 625.00
29-3947 -Ditto-but 150 mm 12.0 mm thick Metre 1,550.00
29-3948 -Ditto-but 200 mm 14.0 mm thick Metre 1,875.00
29-3949 -Ditto-but 250 mm 18.0 mm thick Metre 2,984.00
29-3950 -Ditto-but 300 mm 12.0 mm thick Metre 2,710.00
29-3951 PVC Pipe (Light gd-C) 75 mm x 3.5 mm thick Metre 199.20
29-3952 -Ditto- but 100 mm x 4.5 mm thick Metre 318.00
29-3953 PVC Corrugated flexible pipe Aziz brand 13 mm dia Metre 16.80
29-3954 - Ditto - but for 20 mm dia Metre 18.00
29-3955 - Ditto - but for 25 mm dia Metre 26.40
29-3956 - Ditto - but for 30 mm dia Metre 36.00
29-3957 - Ditto - but for 40/50 mm dia Metre 45.60
29-3958 PVC Water grade Coil pipe (HDPE) any length & Metre 30.00
brand 13 mm dia 2.0 mm thick

29-3959 - Ditto - but for 20 mm dia 2.3 mm thick Metre 39.00

29-3960 - Ditto - but for 25 mm dia 2.3 mm thick Metre 51.00

612
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

LINE FITTINGS
29-3961 Socket GI 12.50 mm dia Each 15.00

29-3962 - Ditto - but for 18.70 mm dia Each 18.00

29-3963 - Ditto - but for 25.00 mm dia Each 28.00

29-3964 - Ditto - but for 37.50 mm dia Each 75.00

29-3965 - Ditto - but for 50.00 mm dia Each 93.00

29-3966 - Ditto - but for 75.00 mm dia Each 273.00

29-3967 - Ditto - but for 100.00 mm dia Each 432.00

29-3968 - Ditto - but for 150.00 mm dia Each 557.00

29-3969 - Ditto - but for 200.00 mm dia Each 690.00

29-3970 Socket redg GI 18.70x12.50 Each 22.00

29-3971 - Ditto - but for 25.00x12.50 Each 35.00

29-3972 - Ditto - but for 37.50 x to 12.50 Each 62.00

29-3973 - Ditto - but for 50.00 x to 12.50 Each 99.00

29-3974 - Ditto - but for 75.00 x to 12.50 Each 288.00

29-3975 - Ditto - but for 100.00 x to 12.50 Each 675.00

29-3976 - Ditto - but for 150.00 x to 12.50 Each 833.00

29-3977 Tee GI 12.50 mm dia Each 19.00

29-3978 - Ditto - but for 18.70 mm dia Each 60.00

29-3979 - Ditto - but for 25.00 mm dia Each 93.00

29-3980 - Ditto - but for 37.50 mm dia Each 99.00

29-3981 - Ditto - but for 50.00 mm dia Each 143.00

29-3982 - Ditto - but for 75.00 mm dia Each 495.00

29-3983 - Ditto - but for 100.00 mm dia Each 680.00

29-3984 - Ditto - but for 150.00 mm dia Each 2,475.00

29-3985 - Ditto - but for 200.00 mm dia Each 2,500.00

29-3986 Tea redg GI 18.70 x 12.50 mm Each 44.00

29-3987 - Ditto - but for 25.00 x to 12.50 mm Each 62.00

29-3988 - Ditto - but for 37.50 x to 12.50 mm Each 130.00

29-3989 - Ditto - but for 50.00 x to 12.50 mm Each 148.00

29-3990 - Ditto - but for 75.00 x to 12.50 mm Each 495.00

29-3991 - Ditto - but for 100.00 x to 12.50 mm Each 796.00

29-3992 - Ditto - but for 150.00 x to 12.50 mm Each 2,720.00

613
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-3993 Elbow GI 12.50 mm dia Each 18.00

29-3994 - Ditto - but for 18.70 mm dia Each 25.00
29-3995 - Ditto - but for 25.00 mm dia Each 44.00
29-3996 - Ditto - but for 37.50 mm dia Each 81.00
29-3997 - Ditto - but for 50.00 mm dia Each 112.00
29-3998 - Ditto - but for 75.00 mm dia Each 520.00
29-3999 - Ditto - but for 100.00 mm dia Each 710.00
29-4000 - Ditto - but for 150.00 mm dia Each 1,900.00
29-4001 Bend GI 12.50 mm dia Each 31.00
29-4002 - Ditto - but for 18.70 mm dia Each 44.00
29-4003 - Ditto - but for 25.00 mm dia Each 93.00
29-4004 - Ditto - but for 37.50 mm dia Each 161.00
29-4005 - Ditto - but for 50.00 mm dia Each 271.00
29-4006 - Ditto - but for 75.00 mm dia Each 1,051.00
29-4007 - Ditto - but for 100.00 mm dia Each 2,163.00
29-4008 - Ditto - but for 150.00 mm dia Each 4,966.00
29-4009 - Ditto - but for 200.00 mm dia Each 5,300.00
29-4010 Elbow redg GI 18.70 x to 12.50 mm Each 35.00
29-4011 - Ditto - but for 25.00 x to 12.50 mm Each 52.00
29-4012 - Ditto - but for 37.50 x to 12.50 mm Each 81.00
29-4013 - Ditto - but for 50.00 x to 12.50 mm Each 105.00
29-4014 - Ditto - but for 75.00 x to 12.50 mm Each 522.00
29-4015 - Ditto - but for 100.00 x to 12.50 mm Each 704.00
29-4016 - Ditto - but for 150.00 x to 12.50 mm Each 2,047.00
29-4017 - Ditto - but for 200.00 x to 12.50 mm Each 2,300.00
29-4018 Check / Back Nut GI 12.50 mm dia Each 17.00
29-4019 - Ditto - but for 18.70 mm dia Each 22.00
29-4020 - Ditto - but for 25.00 mm dia Each 31.00
29-4021 - Ditto - but for 37.50 mm dia Each 47.00
29-4022 - Ditto - but for 50.00 mm dia Each 53.00
29-4023 - Ditto - but for 75.00 mm dia Each 177.00
29-4024 - Ditto - but for 100.00 mm dia Each 295.00
29-4025 - Ditto - but for 150.00 mm dia Each 426.00
29-4026 - Ditto - but for 200.00 mm dia Each 550.00

614
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4027 Union Socket GI 12.50 mm dia Each 55.00

29-4028 - Ditto - but for 18.70 mm dia Each 72.00
29-4029 - Ditto - but for 25.00 mm dia Each 83.00
29-4030 - Ditto - but for 37.50 mm dia Each 154.00
29-4031 - Ditto - but for 50.00 mm dia Each 213.00
29-4032 - Ditto - but for 75.00 mm dia Each 650.00
29-4033 - Ditto - but for 100.00 mm dia Each 1,065.00
29-4034 Nipple GI/MS 12.50 mm dia Each 13.00
29-4035 - Ditto - but for 18.70 mm dia Each 18.00
29-4036 - Ditto - but for 25.00 mm dia Each 24.00
29-4037 - Ditto - but 37.50 mm dia Each 48.00
29-4038 - Ditto - but for 50.00 mm dia Each 89.00
29-4039 - Ditto - but for 75.00 mm dia Each 261.00
29-4040 - Ditto - but for 100.00 mm dia Each 537.00
29-4041 Plug MS/GI 12.50 mm dia Each 101.00
29-4042 - Ditto - but for 18.70 mm dia Each 15.00
29-4043 - Ditto - but for 25.00 mm dia Each 18.00
29-4044 - Ditto - but for 37.50 mm dia Each 35.00
29-4045 - Ditto - but for 50.00 mm dia Each 53.00
29-4046 Cap GI 37.50 mm dia Each 79.00
29-4047 - Ditto - but for 50.00 mm dia Each 86.00
29-4048 - Ditto - but for 75.00 mm dia Each 165.00
29-4049 - Ditto - but for 100.00 mm dia Each 212.00
29-4050 - Ditto - but for 150.00 mm dia Each 295.00
29-4051 - Ditto - but for 200.00 mm dia Each 462.00
29-4052 Flange GI 50.00 mm dia Pair 215.00
29-4053 - Ditto - but for 75.00 mm dia Pair 537.00
29-4054 - Ditto - but for 100.00 mm dia Pair 900.00
29-4055 - Ditto - but for 150.00 mm dia Pair 1,100.00
29-4056 - Ditto - but for 200.00 mm dia Pair 1,250.00
29-4057 Dresser joint CI upto 75.00 mm dia Each 530.00
29-4058 - Ditto - but for 100.00 mm dia Each 636.00
29-4059 - Ditto - but for 150.00 mm dia Each 742.00
29-4060 - Ditto - but for 200.00 mm dia Each 1,325.00

615
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

CONTROL COCKS & VALVES

29-4061 Sluice valve CI 50.00 mm dia (Milnars / KSB) Each 4,240.00

29-4062 - Ditto - but for 75.00 mm dia (Milnars / KSB) Each 4,770.00
29-4063 - Ditto - but for 100.00 mm dia (Milnars / KSB) Each 7,420.00
29-4064 - Ditto - but for 150.00 mm dia (Milnars / KSB) Each 8,480.00
29-4065 - Ditto - but for 200.00 mm dia (Milnars / KSB) Each 11,385.00
29-4066 Gate valve Gun metal 12.50 mm dia Each 233.00
29-4067 - Ditto - but for 18.70 mm dia Each 297.00
29-4068 - Ditto - but for 25.00 mm dia Each 424.00
29-4069 - Ditto - but for 37.50 mm dia Each 689.00
29-4070 - Ditto - but for 50.00 mm dia Each 1,113.00
29-4071 - Ditto - but for 75.00 mm dia Each 3,286.00
29-4072 - Ditto - but for 100.00 mm dia Each 5,459.00
29-4073 Non-return valve CI 50 mm dia Each 2,968.00
29-4074 - Ditto - but for 75 mm dia (Milnars / KSB) Each 4,240.00
29-4075 - Ditto - but for 100 mm dia (Milnars / KSB) Each 6,360.00
29-4076 - Ditto - but for 150 mm dia (Milnars / KSB) Each 10,600.00
29-4077 - Ditto - but for 200 mm dia Each 13,780.00
29-4078 Check valve Gun metal 25 mm dia Each 409.00
29-4079 - Ditto - but for 37.5 mm dia Each 668.00
29-4080 - Ditto - but for 50 mm dia Each 1,050.00
29-4081 - Ditto - but for 75 mm dia Each 2,809.00
29-4082 - Ditto - but for 100 mm dia Each 4,664.00
29-4083 - Ditto - but for 125/150 mm dia Each 7,740.00
29-4084 Float valve brass 12.50 mm dia with copper ball Each 380.00
29-4085 - Ditto - but for 18.70 mm dia Each 500.00
29-4086 - Ditto - but for 25.00 mm dia Each 716.00
29-4087 - Ditto - but for 37.50 mm dia Each 800.00
29-4088 - Ditto - but for 50.00 mm dia Each 820.00
29-4089 Float valve brass with Plastic ball 12.50 mm dia Each 377.00
29-4090 - Ditto - but 18.70 mm dia Each 435.00
29-4091 - Ditto - but 25.00 mm dia Each 465.00
29-4092 - Ditto - but 37.50 mm dia Each 657.00

616
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4093 Gloria brand Bib Cock Model GBC-30100 Each 650.00

29-4094 - Ditto - but Con. (M) Model GBC-3042 Each 827.00

29-4095 - Ditto - but (H) Model GBC-3045 Each 843.00

29-4096 - Ditto - but (H-SP) Model GBC-30117 Each 880.00

29-4097 - Ditto - but Sink Cock Model GSC-3085 Each 923.00

29-4098 Nazma metal brand Fancy Bib Cock Model Sixcorn Each 917.00

29-4099 - Ditto - but Con. Model Sixcorn Each 943.40

29-4100 - Ditto - but Sink Cock 8" Model Tristar Each 965.00
29-4101 Bib cock brass 12.50 mm dia approved brand Each 413.00
(Weight not less than 250 gm)

29-4102 - Ditto - 18.70 mm dia Each 450.00

29-4103 - Ditto - but 12.50 mm dia long size Each 514.00

29-4104 - Ditto - 18.70 mm dia long size Each 612.00

29-4105 - Ditto - double knob (Hot & Cold) 12.50 mm dia CP Each 1,517.00
29-4106 - Ditto - 18.70 mm dia CP Each 1,753.00
29-4107 Bib cock CP 12.50 mm dia approved brand Each 615.00

29-4108 - Ditto - 18.70 mm dia Each 650.00

29-4109 - Ditto - long 150 mm size 12.50 mm dia Each 742.00

29-4110 - Ditto - 18.70 mm dia Each 786.00

29-4111 - Ditto - long 200 mm size 12.50 mm dia Each 742.00
29-4112 - Ditto - 18.70 mm dia Each 784.00

29-4113 Bib cock plastic 12.50 mm dia (Local) Each 50.00

29-4114 - Ditto - 18.70 mm dia Each 60.00

29-4115 Bib Cock CP Raja metal, Model R-719 Each 615.00

29-4116 - Ditto - but Con. Model A-716 Each 742.00

29-4117 - Ditto - but Sink Model A-717 Each 838.00

29-4118 - Ditto - but Fancy Sharif, Model Each 659.00

29-4119 - Ditto - but Con. Model Each 840.00

29-4120 - Ditto - but Sink Cock, Model Each 941.00

29-4120A Twin bib cock chromium plated 12.50mm dia Each 1,176.60

29-4121 Stop cock brass 12.50 mm dia approved brand Each 413.00

617
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4122 - Ditto - 18.70 mm dia Each 445.00

29-4123 - Ditto - 25.00 mm dia Each 477.00

618
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4124 Stop cock CP 12.50 mm dia (Concealed) Each 986.00

29-4125 - Ditto - 18.70 mm dia Each 1,050.00
29-4126 Stop cock CP Surface type 12.50 mm dia Each 615.00
29-4127 - Ditto - 18.70 mm dia Each 742.00
29-4128 Stop cock Gloria, Model GSC-30105 Each 676.00
29-4129 - Ditto - but (M) Model GSC-30106 Each 944.00
29-4130 - Ditto - but (H) Model GSC-30104 Each 965.00
29-4131 - Ditto - but (H-SP) Model GSC-30118 Each 1,055.00
29-4132 Stop cock Con (H) Nazma, Model TRI-STAR Each 1,108.00
29-4133 - Ditto - but Con (L) Model Sixcorn Each 1,002.00
29-4134 - Ditto - but Con. (M) Model TRI-STAR Each 1,002.00
29-4135 Stop cock Con. Raja metal, Model A-713 Each 986.00
29-4136 Stop cock con Sharif metal, Model Each 990.00
29-4137 Angle stop cock CP 12.5 mm approved brand Each 620.00
29-4138 - Ditto - but Gloria, Model GASC-30116 Each 669.00
29-4139 - Ditto - but Con. Model GASC-30115 Each 698.00
29-4140 - Ditto - Nazma, Model Sixcorn Each 700.00
29-4141 - Ditto - Raja metal, Model A-718 Each 620.00
29-4142 - Ditto - Sharif metal, Model Each 625.00
29-4143 Elbow action Bib Cock Gloria, Model GEBC-046 Each 2,062.00
29-4144 - Ditto - but Raja metal, Model A-826 Each 1,755.00
29-4145 - Ditto - but Sink Cock Model A-828 Each 1,643.00
29-4146 Elbow action Pillar Cock Gloria, Model GEPC-0122 Each 2,115.00
29-4147 - Ditto - but Raja metal, Model A-827 Each 1,643.00
29-4148 Push Cock CP Raja metal, Model A-836 Each 520.00
29-4149 - Ditto - but Brass Model A-837 Each 509.00
29-4150 Bathtub Mixture hand Shower Gloria, Model GBTM- Each 3,843.00
29-4151 3058
- Ditto - but Nazma Model TRI-STAR Each 3,996.00
29-4152 - Ditto - but Raja Metal Model R-701 Each 3,551.00
29-4153 - Ditto - but Sharif metal, Model Each 3,600.00
29-4154 Sink Mixture Tap Gloria, Model GSM-3071 Each 2,677.00
29-4155 - Ditto - but Nazma brand, Model TRI-STAR Each 2,846.00
29-4156 - Ditto - but Raja metal, Model R-703 Each 2,438.00
29-4157 - Ditto - but Sharif metal, Model Each 2,680.00

619
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4158 WHB Mixture Tap Gloria, Model GBM-3054 Each 2,131.00

29-4159 - Ditto - but Nazma brand, Model TRI-STAR Each 2,226.00
29-4160 - Ditto - but Raja metal, Model R-702 Each 1,866.00
29-4161 - Ditto - but Sharif metal, Model Each 1,860.00
29-4162 Bottle trap Gloria, Model GBT-13 Each 912.00
29-4163 - Ditto - but Nazma brand, Model Each 1,002.00
29-4164 - Ditto - but Raja metal, Model A-835 Each 1,113.00
29-4165 - Ditto - but Sharif metal, Model Each 1,125.00
29-4166 Pillar Cock (L) Gloria, Model GPC-3082 Each 770.00
29-4167 - Ditto - but (M) Model GPC-3095 Each 785.00
29-4168 - Ditto - but (H) Model GPC-3083 Each 800.00
29-4169 - Ditto - but (H-SP) Model GPC-30119 Each 938.00
29-4170 - Ditto - but (L) Nazma, Model TRI-STAR Each 917.00
29-4171 - Ditto - but (H) Model Each 991.00
29-4172 - Ditto - but (SPL) Moving Model TRI-STAR Each 1,315.00
29-4173 - Ditto - but (H-SP) Model TRI-STAR Each 949.00
29-4174 - Ditto but 12.50 mm approved brand Each 827.00
29-4175 - Ditto - 12.50 mm foreign made Each 1,484.00
29-4176 - Ditto - but Raja metal Model R-710 Each 658.00
29-4177 - Ditto - but (NL) Sharif metal, Model Each 833.00
29-4178 - Ditto - but (L) Model Each 812.00
29-4179 - Ditto - but (M) Model Each 698.00
29-4180 - Ditto - but (N-H) Model SM-7016 Each 954.00
29-4181 Shower Moving 12.50 mm dia approved brand Each 678.00
29-4182 - Ditto - but Gloria, Model GMS-032 Each 875.00
29-4183 - Ditto - but Raja metal, Model A-832 Each 615.00
29-4184 Shower Round Raja metal, Model A-830 Each 901.00
29-4185 Shower CP 12.50 mm dia approved brand Each 410.00
29-4186 - Ditto - but 18.70 mm dia approved brand Each 450.00
29-4187 Shower Telephonic 12.50 mm dia approved brand Each 700.00
29-4188 Plastic pipe connection with brass union on both Each 101.00
29-4189 ends
- Ditto12.50
- but mm diamm dia
18.70 Each 106.00

620
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

WATER TANKS

29-4190 PVC / Plastic food grade water Tank any shape and
size (Gazi / Polycon / Padma) Litre 9.50

29-4191 Water tank GI 1600 Litre with 16 BG sheet Each 13,113.37

29-4192 - Ditto - 18 BG sheet Each 9,131.99
29-4193 Water tank GI 800 Litre 16 BG sheet Each 7,573.54
29-4194 - Ditto - 18 BG sheet Each 6,050.04
29-4195 Ferro Cement W/Tank 1800 Litre complete Each 9,955.70
29-4196 GP Sheet for water Tank Kg 95.00
29-4197 Rivet Each 0.70
29-4198 Locking arrangement (Hinges, Haps & staple) Each 150.00

HAND TUBE WELLS

29-4199 Hand pump no .6 with handle, plunger , head, base,

bucket etc. Each 2,290.00

29-4200 Handle for hand pump Each 371.00

29-4201 Base plate for hand pump Each 262.00
29-4202 Plunger for hand pump Each 101.00
29-4203 Head cover for hand pump Each 307.00
29-4204 Seat valve for hand pump Each 22.00
29-4205 Bucket for hand pump Each 37.00
29-4206 Strainer brass for tube well 37.5 mm Metre 875.00
29-4207 - Ditto - but for 50 mm Metre 986.00
29-4208 Strainer PVC/uPVC approved brand for tube well
Metre 111.00
37.5 mm
29-4209 - Ditto - but for 50 mm Metre 141.00

DEEP TUBE WELLS & PUMPS

29-4210 Strainer Stainless (SS) foreign made, 20 - 40 Slot,

20% - 25% opening Area having wall thickness 2.75 Metre 21,195.00
mm, for 200 mm dia
29-4211 - Ditto - but for 150 mm dia Metre 15,339.00
29-4212 - Ditto - but for 100 mm dia Metre 10,319.00
29-4213 - Ditto - but for 75 mm dia Metre 8,000.00

621
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4214 Strainer uPVC 20 - 40 Slot, 20% - 25% opening

Metre 2,565.00
area, 200 mm dia wall thickness 9 mm
- Ditto - but for 150 mm dia wall thickness
29-4215 Metre 1,800.00
7.9 mm- but for 100 mm dia wall thickness
- Ditto
29-4216 Metre 850.00
6.2 mm
29-4217 - Ditto - but for 75 mm dia wall thickness 4.8 Metre 550.00
Casing / housing pipe, thickness 6.35 for 400 mm
29-4218 Metre 6,100.00
dia
29-4219 - Ditto - but for 350 mm dia Metre 5,400.00
29-4220 - Ditto - but for 300 mm dia Metre 5,000.00
29-4221 - Ditto - but for 250 mm dia Metre 4,550.00
29-4222 Casing / housing pipe, thickness 4 for 600 mm dia Metre 5,550.00
29-4223 - Ditto - but for 650 mm dia Metre 6,125.00
29-4224 - Ditto - but for 700 mm dia Metre 7,250.00
29-4225 Casing / housing pipe, thickness 8 for 400 mm dia Metre 8,350.00
29-4226 Casing / housing pipe, thickness 10 for 400 mm dia Metre 10,400.00
Reducer MS thickness 6.35 mm for 400x200 mm
29-4227 Each 8,500.00
dia
29-4228 - Ditto - but for 350 x 150 mm dia Each 6,400.00
29-4229 - Ditto - but for 300x 150 mm dia Each 6,000.00
29-4230 - Ditto - but for 300x 100 mm dia Each 6,500.00
29-4231 - Ditto - but for 250 x 75 mm dia Each 5,000.00
29-4232 Centralizer made of 12.50 mm dia round bar Each 675.00
29-4233 Well graded pea gravel c.um 3,300.00
29-4234 Nut Bolt for Hand Pump Each 22.00
29-4235 Drinking water quality test full package Sample 6,000.00
29-4236 Column pipe 1.5 / 3.04 m long wall thickness not Metre 6,590.00
29-4237 less than 6.35- mm
- Ditto with100
but for shaft
mm ,bush
dia socket etc (KSB Metre 8,470.00
29-4238 - Ditto - but for 125 mm dia Metre 10,470.00
29-4239 - Ditto - but for 150 mm dia Metre 11,230.00
29-4240 - Ditto - but for 200 mm dia Metre 16,600.00
29-4241 Both Ends flanged type MS Column Pipe 150 mm Metre 3,977.00
29-4242 with special
- Dittocable
- butgroove,
for 100 nut-bolts
mm pipeand gasket Metre 2,780.00
29-4243 - Ditto - but for 75 mm pipe Metre 2,259.00
29-4244 Both Ends flanged type MS Column / Riser Pipe Each 3,977.00
29-4245 (API-5L- grade-B)
Ditto - but150
for mm with pipe
100 mm special cable Each 2,780.00
29-4246 - Ditto - but for 75 mm pipe Each 2,259.00

622
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4247 - Ditto - but for 50 mm pipe Each 1,564.00

29-4248 Both Ends flanged type MS/GI Bend 150 mm Each 4,326.00
29-4249 - Ditto - but for 100 mm pipe Each 1,834.00
29-4250
- Ditto - but for 75 mm pipe Each 927.00

29-4251 Butterfly Valve 75 mm complete with nut bolts and

Each 3,305.00
flanges foreign made
29-4252
- Ditto - but for 100 mm Each 4,112.00

29-4253
- Ditto - but for 150 mm Each 5,214.00

29-4254
- Ditto - but for 200 mm Each 7,418.00

29-4255 Discharge head complete with priming funnel,

pressure Metre gauge for outlet 75 mm dia. Each 23,000.00

29-4256
- Ditto - but for 100 mm dia Each 23,500.00

29-4257 - Ditto - but for 125 mm dia Each 26,000.00

29-4258
- Ditto - but for 150 mm dia Each 27,000.00

29-4259 - Ditto - but for 175/200 mm dia Each 31,000.00

29-4260 Direct on line Push button starter suitable for 230 /
400 V 3 ph / 1 ph up to 2 HP motor Each 806.00

29-4261
- Ditto - but for 230/ 400 V 3 ph / 1 ph over 2
Each 1,613.00
to 5 HP motor
29-4262 Star Delta Push button auto starter suitable for 380/
400 V (6 HP to 20 HP Motor) China / Korea / Taiwan Each 4,128.00

29-4263
- do - but for 40 HP Each 10,000.00

29-4264
- do - but for 60 HP Each 11,000.00

29-4265 Starter Push Button auto Star Delta other than

China / Korea / Taiwan for 5 HP Motor Each 4,500.00

29-4266
- Ditto- but for 7.5 - 15 HP Motor Each 5,000.00

29-4267
- Ditto- but for 20 - 30 HP Motor Each 10,000.00

29-4268
- Ditto- but for 40 - 50 HP Motor Each 12,000.00

29-4269
- Ditto- but for Over 50 HP Motor Each 15,000.00

623
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4270 Panel Box (275x125x175 mm) type Auto Starter Complete with
1xMCB, 1xAmMetre with ASS, 1xVolt Metre with VSS, 3xPh
indicator, 1xpneumatic timer, 2xPush button, indicator lamp for
ON/TRIP, Thermal over load relay for protection against phase
Set 37,033.00
failure, phase reverse and dry run complete with cables and lugs
having rating for 5 / 6 HP motor foreign made

29-4271 - Ditto - but (size 350x275x175) for 10 HP

Set 51,062.00
motor
29-4272 - Ditto - but (size 450x350x200) for 15 HP
Set 56,867.00
motor
29-4273 - Ditto - but (size 450x350x200) for 20 HP
Set 58,802.00
motor
29-4274 - Ditto - but (size 450x350x200) for 25 HP
Set 65,897.00
motor
29-4275 - Ditto - but (size 450x350x200) for 30 HP
Set 73,906.00
motor
29-4276 - Ditto - but (575x500x200 mm) for 41 HP
Set 87,612.00
motor
29-4277 - Ditto - but (625x500x200 mm) for 52 HP
Set 101,211.00
motor
29-4278 - Ditto - but (625x500x200 mm) for 62/75 HP
Set 129,000.00
motor
29-4279
Submersible Marine cable flat 3 core size 4 mm Metre 451.00
29-4280
- Ditto - but size 6 mm Metre 689.00
29-4281
- Ditto - but size 10 mm Metre 1,007.00
29-4282
- Ditto - but size 16 mm Metre 1,484.00
29-4283
- Ditto - but size 25 mm Metre 1,887.00
29-4284 Submersible type pumping set complete with
electric Motor SP 220 Volts 50 Hz, Brand CALAMA
Each 52,688.00
having lifting head 78-45 M capacity 2.4-4.5 M3 /hr ,
Model no. Gold 3/17+2 HP
29-4285 - Ditto - but head 50-27 M capacity 12 - 20
M3/hr, Model no. Gold 5/13.2+5 HP (3 ph) Each 29,300.00

29-4286 - Ditto - but head 34-20 M capacity 35 - 57

M3/hr, Model no. QM 63/5+10 HP (3 ph) Each 120,297.00

29-4287 - Ditto - but head 63 - 41 M capacity 50 - 71

M3/hr, Model no. QM 65/8+20 HP (3 ph) Each 178,323.00

29-4288 - Ditto - but head 79 - 52 M capacity 121 -

136 M3/hr, Model no. QM 83/IV+30 HP (3 ph) Each 277,000.00

624
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4289 - Ditto - but head 50 - 30 M capacity 142 -

214 M3/hr, Model no. GM - 185/2+40 HP (3 Each 355,000.00
ph)

625
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4290 Centrifugal pumping set complete with electric

Motor SP 220 Volts 50 Hz, 2900 rpm, Brand
Each 11,556.00
STRIATE / Pedrolla / Marina / GAZI / RFL having
lifting head 15-30 M capacity 100-20 LPM (0.75/1
29-4291 HP)
- Ditto - but for head 20-45 M, capacity 140-
Each 20,693.00
20 LPM (1.5 HP)
29-4292
- Ditto - but for head 25-55 M, capacity 20-
Each 26,337.00
160 LPM (2 HP)
29-4293
- Ditto - but for head 25-55 M, capacity 20-
Each 41,871.00
180 LPM (3 HP)

29-4294
- Ditto - but for head 35-60 M, capacity 100-
Each 60,737.00
350 LPM (5 HP)
29-4295 - Ditto - but for head 25-40 M, cpacity 270-
540 LPM (7.5 HP), KSB / Milnars Pump with
Each 98,050.00
SIEMENS Motor 3 Ph, 400 volts, 50 Hz

29-4296 - Ditto - but for 260-580 LPM (10 HP) KSB /

Milnars Pump with SIEMENS / GEC /
Crompton Motor 400 Volt, 3 Ph, 50 Hz Each 101,000.00
against head 50-40 metre with suction 50 mm
delivary 40 mm. Complete
29-4297 - Ditto - but for 360-630 LPM (15 HP) KSB /
Milnars Pump with SIEMENS /GEC /
Crompton Motor, 3 Ph, 50 Hz, 400 Volts Each 126,000.00
against head 55-40 metre with suction 50 mm
delivary 40 mm complete
29-4298 - Ditto - but for 780-1500 LPM ( 20 HP) KSB /
Milnars Pump with SIEMENS /GEC /
Crompton Motor, 400 Volts, 3 Ph, 50 Hz Each 144,000.00
against head 50-40 metre with suction 75 mm
29-4299 delivary
Horizontal 65 mmInduction
Electric complete.Motor 400 Volt, 3
phase 50 Hz, rpm 1400-1500, 5 HP GEC / China / Each 24,237.00
Crompton / Teco / Siemens brand
29-4300 - Ditto - but for 7.5 HP GEC / China /
Each 33,330.00
Crompton / Teco / Siemens brand
29-4301 - Ditto - but for 10 HP GEC / China /
Each 38,834.00
Crompton / Teco / Siemens brand
29-4302 - Ditto - but for 15 HP GEC / China /
Each 57,020.00
Crompton / Teco / Siemens brand
29-4303 - Ditto - but for 20 HP GEC / China /
Each 62,763.00
Crompton / Teco / Siemens brand
29-4304 - Ditto - but for 25 HP GEC / China /
Each 67,327.00
Crompton / Teco / Siemens brand
29-4305 - Ditto - but for 30 HP GEC / China /
Each 94,155.00
Crompton / Teco / Siemens brand

626
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4306 - Ditto - but for 40 HP GEC / China /

Each 175,000.00
Crompton/ Teco / Siemens brand

627
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4307 Horizontal Electric Induction Motor 400 Volt, 3

phase 50 Hz, rpm 2800-2900, 5 HP GEC / China / Each 22,733.00
Crompton / Teco / Siemens brand
29-4308 - Ditto - but for 7.5 HP GEC / China /
Each 32,236.00
Crompton / Teco / Siemens brand
29-4309 - Ditto - but for 10 HP GEC / China /
Each 38,082.00
Crompton / Teco / Siemens brand
29-4310 - Ditto - but for 15 HP GEC / China /
Each 55,619.00
Crompton / Teco / Siemens brand
29-4311 - Ditto - but for 20 HP GEC / China /
Each 59,482.00
Crompton / Teco / Siemens brand
29-4312 - Ditto - but for 25 HP GEC / China /
Each 67,618.00
Crompton / Teco / Siemens brand
29-4313 - Ditto - but for 30 HP GEC / China /
Each 90,248.00
Crompton / Teco / Siemens brand
29-4314 - Ditto - but for 40 HP GEC / China /
Each 122,177.00
Crompton/ Teco / Siemens brand
29-4315 Centrifugal Pumping set KSB / Milnars suitable for 5
HP Primeover / Electric Motor 3Ph 50 Hz 400 Volts Each 23,358.00
2900 rpm
29-4316 - Ditto - but for 7.5 HP Primeover / Electric
Each 58,830.00
Motor
29-4317 - Ditto - but for 10 HP Primeover / Electric
Each 60,600.00
Motor
29-4318 - Ditto - but for 15 HP Primeover / Electric
Each 75,600.00
Motor
29-4319 - Ditto - but 20/25/30 HP Primeover / Electric
Each 135,300.00
Motor
29-4320 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 40-315, rated HP 10, Head 40 - 20 M, Discharge "Q" 9 - 31
m3/hr, Suction 65 mm Delivery 40 mm Complete. Set 44,612.00

29-4321 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 50-315, rated HP 15, Head 36 - 20 M, Discharge "Q" 16 - 56
m3/hr, Suction 80 mm Delivery 50 mm Complete. Set 50,400.00

29-4322 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 65-315, rated HP 20, Head 37 - 20 M, Discharge "Q" 30 -100
m3/hr, Suction 100 mm Delivery 65 mm Complete. Set 62,156.00

29-4323 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 125-250, rated HP 25, Head 23 - 9 M, Discharge "Q" 100 - 350
m3/hr, Suction 150 mm Delivery 125 mm Complete. Set 67,993.00

29-4324 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 80-315, rated HP 30, Head 40 - 23 M, Discharge "Q" 50 - 160
m3/hr, Suction 125 mm Delivery 80 mm Complete. Set 90,200.00

628
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4325 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 100-315, rated HP 35, Head 40 - 22 M, Discharge "Q" 70 - 230
m3/hr, Suction 125 mm Delivery 100 mm Complete. Set 105,000.00

29-4326 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 80-400, rated HP 40, Head 56 - 30 M, Discharge "Q" 60 - 170
m3/hr, Suction 125 mm Delivery 80 mm Complete. Set 116,800.00

629
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4327 KSB (India) Brand, Centrifugal Pump only, 1450 rpm Model Mega
G 125-315, rated HP 50, Head 40 - 22 M, Discharge "Q" 100 -
340 m3/hr, Suction 150 mm Delivery 125 mm Complete.
Set 140,000.00

29-4328 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 40-125, rated HP 5.5, Head 47 - 17 M, Discharge "Q" 18 - 64
m3/hr, Suction 65 mm Delivery 40 mm Complete. Set 29,670.00

29-4329 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 40-160, HP 10, Head 47 - 17 M, Discharge "Q" 18 - 64 m3/hr,
Suction 65 mm Delivery 40 mm Complete. Set 48,177.00

29-4330 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 40-200, rated HP 15/16, Head 60 - 24 M, Discharge "Q" 16 - 62
m3/hr, Suction 65 mm Delivery 40 mm Complete.
Set 60,102.00

29-4331 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 32-250, rated HP 20, Head 94 - 50 M, Discharge "Q" 9 - 31
m3/hr, Suction 50 mm Delivery 32 mm Complete. Set 67,018.00

29-4332 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 65-160, rated HP 20, Head 41 - 18 M, Discharge "Q" 45 - 150
m3/hr, Suction 100 mm Delivery 65 mm Complete. Set 68,688.00

29-4333 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 40-250, rated HP 30, Head 91 - 40 M, Discharge "Q" 18 - 64
m3/hr, Suction 65 mm Delivery 40 mm Complete. Set 84,906.00

29-4334 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 65-200, rated HP 40, Head 66 - 36 M, Discharge "Q" 50 - 160
m3/hr, Suction 100 mm Delivery 65 mm Complete. Set 109,710.00

29-4335 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 50-250, HP 45, Head 95 - 50 M, Discharge "Q" 30 - 100 m3/hr,
Suction 80 mm Delivery 50 mm Complete. Set 124,974.00

29-4336 KSB (India) Brand, Centrifugal Pump only, 2900 rpm Model Mega
G 65-250, rated HP 50/60, Head 92 - 50 M, Discharge "Q" 50 -
150 m3/hr, Suction 100 mm Delivery 65 mm Complete. Set 147,870.00

29-4337 KSB Brand, Centrifugal Pump with Motor, TRIABLOC, origin

Germany Nickle cast iron impeller, 2900 rpm, Model 32-160, HP 3,
Head 31 - 22 M, Discharge "Q" 05 - 20 m3/hr, Suction 50 mm
Delivery 32 mm Complete as spd by SIGMA Pumps ltd. Set 55,093.00

29-4338 KSB Brand, Centrifugal Pump with Motor, TRIABLOC, origin

Germany Nickle cast iron impeller, 2900 rpm, Model 32-160, HP 5,
Head 40 - 22 M, Discharge "Q" 05 - 34 m3/hr, Suction 50 mm
Delivery 32 mm Complete as spd by SIGMA Pumps ltd.
Set 85,140.00

29-4339 KSB Brand, Centrifugal Pump with Motor, TRIABLOC, origin

Germany Nickle cast iron impeller, 2900 rpm, Model 40-160, HP
7.5, Head 35 - 24 M, Discharge "Q" 10 - 62 m3/hr, Suction 65 mm Set 98,050.00
Delivery 40 mm Complete as spd by SIGMA Pumps ltd.

630
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4340 KSB Brand, Centrifugal Pump with Motor, TRIABLOC, origin

Germany Nickle cast iron impeller, 2900 rpm, Model 40-160, HP
10, Head 45 - 31 M, Discharge "Q" 10 - 66 m3/hr, Suction 65 mm
Delivery 40 mm Complete as spd by SIGMA Pumps ltd. Set 107,060.00

29-4341 KSB Brand, Centrifugal Pump with Motor, TRIABLOC, origin

Germany Nickle cast iron impeller, 2900 rpm, Model 40-200, HP
15, Head 61 - 44 M, Discharge "Q" 10 - 56 m3/hr, Suction 65 mm
Delivery 40 mm Complete as spd by SIGMA Pumps ltd. Set 136,471.00

29-4342 KSB Brand, Centrifugal Pump with Motor, TRIABLOC, origin

Germany Nickle cast iron impeller, 2900 rpm, Model 40-250, HP
20, Head 75 - 48 M, Discharge "Q" 10 - 58 m3/hr, Suction 65 mm
Set 185,115.00
Delivery 40 mm Complete as spd by SIGMA Pumps ltd.

29-4343 Centrifugal Pumping set (KSB/Milnars) 3 HP complete with

Horizontal induction Motor Electric 3 Ph, AC 400V 50 Hz (local /
foreign ) as required, having capacity to lift water 50-200 LPM at
static head not less than 25 M. Set 41,871.00

29-4344 Centrifugal Pumping set (KSB/Milnars) 5 HP complete with

Horizontal induction Motor Electric 3 Ph, AC 400V 50 Hz (local /
foreign ) as required, having capacity to lift water 300-400 LPM at
Set 46,684.00
static head not less than 25 M.

29-4345 Centrifugal Pumping set (KSB/Milnars) 7.5 HP complete with

Horizontal induction Motor Electric 3 Ph, AC 400V 50 Hz (local /
foreign ) as required, having capacity to lift water 600-750 LPM at
static head not less than 25 M. Set 107,855.00

29-4346 Centrifugal Pumping set (KSB/Milnars) 10 HP complete with

Horizontal induction Motor Electric 3 Ph, AC 400V 50 Hz (local /
foreign ) as required, having capacity to lift water 900-1100 LPM
at static head not less than 35 M. Set 111,100.00

29-4347 Centrifugal Pumping set (KSB/Milnars) 15 HP complete with

Horizontal induction Motor Electric 3 Ph, AC 400V 50 Hz (local /
foreign ) as required, having capacity to lift water 1100-1350 LPM
at static head not less than 35 M. Set 138,600.00

29-4348 Centrifugal Pumping set (KSB/Milnars) 20 HP complete with

Horizontal induction Motor Electric 3 Ph, AC 400V 50 Hz (local /
foreign ) as required, having capacity to lift water 1500-1350 LPM
at static head not less than 35 M.
Set 158,400.00

631
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4349 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM83/2 + 17.5 HP, Head 43-32 M, Discharge Set 175,237.00
"Q" 50-85 m3/hr Complete.

29-4350 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM83/3 + 25 HP, Head 65-47 M, Discharge
Set 193,306.00
"Q" 50-85 m3/hr Complete.

29-4351 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM83/3 + 35 HP, Head 87-64 M, Discharge Set 232,260.00
"Q" 50-85 m3/hr Complete.

29-4352 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM83/5 + 45 HP, Head 109-80 M, Discharge
Set 302,343.00
"Q" 50-85 m3/hr Complete.

29-4353 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM83/6 + 55 HP, Head 130-96 M, Discharge
"Q" 50-85 m3/hr Complete. Set 350,718.00

29-4354 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM83/7 + 60 HP, Head 153-93 M, Discharge
"Q" 50-85 m3/hr Complete. Set 362,812.00

29-4355 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM84/1 + 15 HP, Head 17-13 M, Discharge
"Q" 80-115 m3/hr Complete. Set 172,456.00

29-4356 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM84/2 + 20 HP, Head 34-25 M, Discharge
Set 204,443.00
"Q" 80-115 m3/hr Complete.

29-4357 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM84/3 +30 HP, Head 50-37 M, Discharge "Q"
Set 308,390.00
80-115 m3/hr Complete.

29-4358 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM84/4 +40 HP, Head 68-50 M, Discharge "Q"
Set 289,282.00
80-115 m3/hr Complete.

29-4359 Submersible pumping set with 30 M marine cable Brand

CALAMA, Model PM84/6 +55 HP, Head 102-68 M, Discharge
"Q" 80-115 m3/hr Complete.
Set 344,671.00

29-4360 Bore Well type Submersible Pump Motor Brand KSB (India),
Model CORA 100-7c / 22 + UMA 100-4.5/22, Size 38 mm,
Capacity 0.05 Cusec - 0.08 Cusec against Water Head 110 M -
65 M, Speed 2900 RPM Powered with AC 3 Phase, 50 Hz 400 Set 117,289.00
Volts 6 HP Complete with built in Non - return valve.

29-4361 - Ditto - but for Model BPD 242/7 + UMA 150 - 8/22 or BPD 273/6
+ UMA 150 - 8/22 or BPD 302/4 + UMA 150 - 8/22 or BPH 333/2
+ UMA 150 - 8/22, Size as per manufacturer, Capacity 0.06
Cusec - 0.90 Cusec against Water Head 70 M - 15 M, Speed Set 177,300.00
2900 RPM Powered with AC 3 Phase, 50 Hz 400 Volts 10 HP
Complete with built in Non - return valve.

632
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4362 - Ditto - but for Model BPD 273/8 + UMA 150 - 13/21 or BPD
302/6 + UMA 150 - 13/21 or BPD 302/7 + UMA 150 - 13/21or
BPH 333/2 + UMA 150 - 13/22 or BPH 384/2 + UMA 150 -
13/21, Size as per manufacturer, Capacity 0.10 Cusec - 0.45
Set 243,500.00
Cusec against Water Head 20 M - 48 M, Speed 2900 RPM
Powered with AC 3 Phase, 50 Hz 400 Volts 15 HP Complete with
built in Non - return valve.

29-4363 - Ditto - but for Model BPD 302/8 + UMA 150 - 21/21 or BPD
273/10 + UMA 150 - 21/21 or BPH 333/3 + UMA 150 - 21/21 or
BPH 333/3 + HB - 203 or BPH 384/2 + UMA 150 - 21/21 or BPH
384/2 + HB - 203, Size as per manufacturer Capacity 0.15 Cusec - Set 274,000.00
1.10 Cusec against Water Head 80 M - 24 M, Speed 2900 RPM
Powered with AC 3 Phase, 50 Hz 400 Volts 20 HP Complete with
built in Non - return valve.
29-4364 - Ditto - but for Model BPD 273/12 + UMA 150 - 24/21 or BPD
302/10 + UMA 150 - 24/21 or BPH 333/4 + UMA 150 - 24/21 or
BPH 384/2 + HB - 253 or BPH 384/3 + UMA 150 - 24/21 Size as
per manufacturer, Capacity 0.10 Cusec - 1.10 Cusec against Set 316,700.00
Water Head 125 M - 30 M, Speed 2900 RPM Powered with AC 3
Phase, 50 Hz 400 Volts 25 HP Complete with built in Non - return
valve.
29-4365 - Ditto - but for Model BPH 333/4 + HB 303 or BPH 384/3 + HB
303 or BPN 274/2 + HB 303 or BPH 425/1 + HB 303, Size as per
manufcturer, Capacity 0.40 Cusec - 1.95 Cusec against Water
Head 75 M - 15 M, Speed 2900 RPM Powered with AC 3 Phase, Set 375,000.00
50 Hz 400 Volts 30 HP Complete with built in Non - return valve.

29-4366 - Ditto - but for Model BPH 333/5 + HB 413 or BPN 373/3 + HB
413 or BPN 394/2 + HB 413, Size as per manufacturer, Capacity
0.40 Cusec - 1.80 Cusec against Water Head 115 M - 30 M,
Speed 2900 RPM Powered with AC 3 Phase, 50 Hz 400 Volts 41
Set 453,600.00
HP Complete with built in Non - return valve.

29-4367 - Ditto - but for Model BPH 384/4 + HB 413, Size 125 mm,
Capacity 0.60 Cusec -1.10 Cusec against Water Head 90 M - 50
M, Speed 2900 RPM Powered with AC 3 Phase, 50 Hz 400 Volts Set 453,600.00
41 HP Complete with built in Non - return valve.

29-4368 - Ditto - but for Model BPH 384/4 + HB 523 or BPH 384/5 + HB
523, Size as per manufacturer, Capacity 0.60 Cusec -1.40 Cusec
against Water Head 120 M - 45 M, Speed 2900 RPM Powered
with AC 3 Phase, 50 Hz 400 Volts 52 HP Complete with built in Set 612,000.00
Non - return valve.

29-4369 - Ditto - but for Model BPN 374/3 + NB 523, Size 150 mm,
Capacity 0.65 Cusec -1.40 Cusec against Water Head 75 M - 45
M, Speed 2900 RPM Powered with AC 3 Phase, 50 Hz 400 Volts Set 612,000.00
52 HP Complete with built in Non - return valve.

29-4370 - Ditto - but for Model BPN 374/4 + NB 623 or BPN 394/3 + NB
625, BPN 425/2 + NB 623, Size as per manufacturer, Capacity
0.65 Cusec -1.95 Cusec against Water Head 103 M - 42 M,
Speed 2900 RPM Powered with AC 3 Phase, 50 Hz 400 Volts 62
Set 695,000.00
HP Complete with built in Non - return valve.

633
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4371 - Ditto - but for Model BPN 374/4 + NB 753 or BPN 425/2 + NB
753, Size 150 mm, Capacity 0.65 Cusec -1.95 Cusec against
Water Head 103 M - 51 M, Speed 2900 RPM Powered with AC 3
Phase, 50 Hz 400 Volts 75 HP Complete with built in Non - return
Set 785,000.00
valve.

29-4372 - Ditto - but for Model BPN 374/5 + NBC 853 or BPN 425/3 + NB
853, Size 150 mm, Capacity 0.98 Cusec -2.13 Cusec against
Water Head 130 M - 64 M, Speed 2900 RPM Powered with AC 3
Phase, 50 Hz 400 Volts 85 HP Complete with built in Non - return Set 969,900.00
valve.

29-4373 Multistage Turbine Pump set 25 - 65 M head 100 / 75 mm dia

450 - 600 LPM Brand KSB / Milnars Pumps (BD) Ltd Model
B7B/12 Per Set 167,103.00

29-4374 - Ditto - but 125 / 125 mm dia 900- 1200 LPM, Model
B8B/10 Per Set 194,418.00

29-4375 - Ditto - but 150 / 125 mm dia 1200- 1350 LPM, Model
B8D/12 Per Set 223,494.00

29-4376 - Ditto - but 150 / 125 mm dia 1500-1700 LPM, Model

B10B/6 Per Set 184,969.00

29-4377 - Ditto - but 150 / 125 mm dia 1500-1700 LPM, Model

B10D/8 Per Set 230,000.00

29-4378 Vertical hollow shaft induction Motor 380 / 400 Volts

3 Phase 1450 / 2900 RMP, Brand SIEMENS, Each 159,522.00
having capacity 10 HP
29-4379 - Ditto - but 15 HP Each 161,451.00
29-4380 - Ditto - but 20 HP Each 188,367.00
29-4381 - Ditto - but 30 HP Each 305,609.00
29-4382 - Ditto - but 40 HP Each 374,801.00
29-4383 - Ditto - but 50 HP Each 451,562.00
29-4384 - Ditto - but 60 HP Each 480,981.00
29-4385
- Ditto - but Brand GEC, having capacity, 10 HP Each 45,960.00

29-4386
- Ditto - but 15 HP Each 56,915.00

29-4387
- Ditto - but 20 HP Each 62,692.00

29-4388
- Ditto - but 30 HP Each 98,950.00

29-4389
- Ditto - but 40 HP Each 150,809.00

634
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

GEYSER
29-4390 Water heater electric SP having capacity 45 Litre Each 6,900.00
29-4391 local made
- Ditto - but for 55 - 70 Litre Each 8,000.00
29-4392 - Ditto - but for 80 - 90 Litre Each 10,300.00
29-4393 - Ditto - but for gas operated Each 17,500.00
29-4394 Water heater electric having capacity 100-115 Litre Each 14,500.00
29-4395 - Ditto - but gas operated Each 20,670.00
29-4396 - Ditto - but gas 125-140 Litre Each 23,000.00
29-4397 - Ditto - but gas 160-230 Litre Each 36,570.00
29-4398 Pressure relief valve fro water heater Each 1,590.00
29-4399 Gas thermos couple for gas geyser Each 2,000.00
29-4400 Element for water heater 1500 / 2000 Watt made in Each 2,200.00
29-4401 USA / Italy Kg
Bleaching powder 52.00
29-4402 Caustic Soda Kg 50.00
29-4403 Wire brush Each 55.00
29-4404 Thread tape taflon Roll 12.00
SANITARY FITTINGS
29-4405 Wash hand basin 645x460 mm code-204, white Each 1,272.00
29-4406 -Ditto - but Colour Each 1,344.00
29-4407 -Ditto - but Special Colour Each 1,584.00
29-4408 Wash hand basin 570x420 mm code-211, white Each 1,427.00
29-4409 -Ditto -but Colour Each 1,290.00
29-4410 -Ditto - but special Colour Each 1,440.00
29-4411 Wash hand basin RAK, (Karla) Each 1,665.00
29-4412 -Ditto -but (Orient) Each 1,940.00
29-4413 -Ditto -but (Washington) Each 2,316.00
29-4414 -Ditto -but (Venice) Each 3,646.00
29-4415 -Ditto -but (Windsor) Each 3,030.00
29-4416 Wash hand basin RAK size 590x475, (Cabinat type) Each 2,035.00
29-4417 Porcelain Pedestal code-212A, for WHB white Each 727.00
29-4418 -Ditto - but Colour Each 764.00
29-4419 -Ditto - but special Colour Each 803.00

635
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4420 Bath mirror 350x450 mm Each 300.00

29-4421 -Ditto - but 450x600 mm Each 370.00
29-4422 Porcelain Pedestal RAK, (Karla) Each 1,430.00
29-4423 -Ditto -but (Orient) Each 1,460.00
29-4424 -Ditto -but (Washington) Each 1,650.00
29-4425 -Ditto -but (Venice) Each 2,180.00
29-4426 -Ditto -but (Windsor) Each 1,975.00
29-4427 Glass self 5 mm thick 125x600 mm with braket local Each 490.00
29-4427A Glass self 5 mm thick 125x600 mm only each 70.00
29-4428 - Ditto - but foreign Each 600.00
29-4429 Stainless steel sink single bowl Each 3,100.00
29-4430 -Ditto - but double bowl Each 6,360.00
29-4431 -Ditto - but double bowl foreign (72" x 24") Each 9,000.00
29-4432 Sink (BISF) code-501, size 515 x 430 x 275 mm Each 2,328.00
29-4433 - Ditto - but code-502, size 625 x 490 x 224
Each 2,460.00
mm
29-4434 Asiatic type glazed porcelain water closet (BISF) Each 662.00
code-313, white
29-4435 -Ditto - but Colour Each 720.00
29-4436 -Ditto - but special Colour Each 810.00
29-4437 Asiatic type glazed porcelain water closet (BISF) Each 1,100.00
code-316, white
29-4438 -Ditto - but Colour Each 1,350.00
29-4439 -Ditto - but special Colour Each 1,620.00
29-4440 Asiatic type glazed porcelain water closet (BISF)
Each 540.00
code-314 E, white
29-4441 Asiatic type glazed porcelain water closet RAK Each 1,460.00
29-4442 Oriental pan Orissa type code no. 318 Each 1,386.00
29-4443 -Ditto - but Colour Each 1,595.00
29-4444 European type Water closet White code 106 / 106A Each 1,460.00
29-4445 - Ditto - but Colour Each 1,830.00
29-4446 - Ditto - but Special Colour Each 2,250.00
29-4447 European type glazed porcelain water closet "P" & "S" trap
white (BISF) code no .105 / 105-A Each 1,445.00
29-4448 -Ditto - but coloured Each 1,750.00
29-4449 -Ditto - but special coloured Each 2,107.00

636
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4450 European type glazed porcelain water closet with

seat cover RAK, (Karla) Each 3,710.00

29-4451
- Ditto - but (Orient) Each 4,050.00
29-4452 - Ditto - but (Washington) Each 6,430.00
29-4453 - Ditto - but (Venice) Each 9,230.00
29-4454 Water Combi closet with "P" & "S" trap without
fittings (BISF) code-118/418, White Each 6,540.00

29-4455 -Ditto - but colour Each 7,680.00

29-4456 -Ditto - but special colour Each 8,685.00
29-4457 -Ditto - but foreign made Each 12,000.00
29-4458 Water Combi closet with "P" & "S" trap without
fittings (BISF) code-114/414, White Each 6,540.00

29-4459 - Ditto but Colour Each 7,680.00

29-4460 - Ditto - but Special Colour Each 8,685.00
29-4461 Cistern flushing porcelain with for WC without fittings
(BISF) code-401 Each 1,542.00

29-4462 - Ditto -but colour Each 1,918.00

29-4463 - Ditto -but special colour Each 2,300.00
29-4464 Combi closet flushing mechanism / fittings local
Each 1,600.00
made
29-4465 - Ditto - but foreign made Each 2,350.00
29-4466 Low down cistern flushing mechanism / fittings local Each 650.00

29-4467 C I Cistern flushing mechanism local made Each 1,935.00

29-4468 Cistern (BISF) code-403, for WC white Each 1,358.00
29-4469 - Ditto - but Colour Each 1,700.00
29-4470 - Ditto - but Special Colour Each 1,917.00
29-4471 Water Tank with flushing unit RAK (Karla) Each 2,110.00
29-4472
- Ditto - but (Orient) Each 2,925.00
29-4473
- Ditto - but (Washington) Each 3,130.00
29-4474
- Ditto - but (Venice) Each 3,320.00
29-4475 Full set of spare parts for low down cistern / Combi
closet (BISF) / foreign Each 1,600.00

29-4476 Porcelain foot rest white Pair 240.00

29-4477 Porcelain Standing Urinal BISF code no . 603 Each 1,044.00
29-4478 Glazed Porcelain squatting type Urinal BISF Each 960.00

637
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4479 Porcelain lid for low down cistern Each 965.00

29-4480 -Ditto - but colour / spl colour Each 1,203.00
29-4481 Plastic seat cover any colour local (Hammer) Each 750.00
29-4482 -Ditto - but foreign Each 1,600.00
29-4483 Plastic seat cover Local (Victory) Each 900.00
29-4484 PVC waste pipe for WHB / Sink / Urinal Each 72.00
29-4485 -Ditto -but low down cistern Each 72.00
29-4486 -Ditto - but C I cistern Each 175.00
29-4487 C P chain with rubber plug Each 125.00
29-4488 Basin / Sink PVC waste Each 300.00
29-4489 Bracket for WHB/ Sink / Cistern Each 320.00
29-4490 Paper holder Each 420.00
29-4491 -Ditto - but RAK Each 465.00
29-4492 C P soap dish Each 300.00
29-4493 -Ditto - but foreign Each 370.00
29-4494 -Ditto - but RAK Each 290.00
29-4494A -Ditto - but Melamine Each 180.00
29-4495 C P Towel rail 20 mm Each 430.00
29-4496 -Ditto - but 25 mm Each 460.00
29-4497 -Ditto - but RAK Each 466.00
29-4498 C P Towel rail trangular type Each 460.00
29-4498A C P Towel rail circular type Each 390.00
29-4499 CP Shower curtain pipe rail 20 mm Each 200.00
29-4500 C P gratings 100 mm Each 120.00
29-4501 CP Bottle trap approved brand Each 900.00
29-4502 CI floor trap 100 mm Each 680.00
29-4503 CI 10 cm dia grating Each 90.00
29-4504 Box type PVC grating 100mm any colour Each 280.00
29-4505 RCC Pipe 100 mm Bore (30 mm Thick) Metre 170.00
29-4506 - Ditto - but 150 mm (30 mm Thick) Metre 240.00
29-4507 - Ditto - but 225 mm (40 mm Thick) Metre 375.00
29-4508 - Ditto - but 300 mm (40 mm Thick) Metre 550.00
29-4509 - Ditto - but 375 mm (40 mm Thick) Metre 820.00

638
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4510 - Ditto - but 450 mm (60 mm Thick) Metre 1,160.00

29-4511 - Ditto - but 600 mm (75 mm Thick) Metre 1,700.00
29-4512 - Ditto - but 750 mm (75 mm Thick) Metre 2,400.00
29-4513 - Ditto - but 900 mm (100 mm Thick) Metre 3,075.00
29-4514 - Ditto - but 1200 mm (125 mm Thick) Metre 8,200.00
29-4515 CI Pipe 50 mm Bore approved brand Metre 690.00
29-4516 - Ditto - but 100 mm Metre 1,440.00
29-4517 - Ditto - but 150 mm Metre 1,700.00
29-4518 CI Bend 50 mm bore (Plain) Each 296.00
29-4519 - Ditto - but 100 mm (Plain) Each 400.00
29-4520 CI Bend 50 mm bore (Door) Each 300.00
29-4521 - Ditto - but 100 mm (Door) Each 420.00
29-4522 CI Tee 50 mm bore (Plain) Each 265.00
29-4523 - Ditto - but 100 mm (Plain) Each 690.00
29-4524 uPVC Tee section 100x100 mm Each 321.00
29-4525 - Ditto - but 50x50 mm Each 91.00
29-4526 uPVC Tee section 100x50 mm Each 410.00
29-4527 - Ditto - but 150x50 mm Each 1,050.00
29-4528 - Ditto - but 50x50 mm Each 200.00
29-4529 uPVC Tee reducing 150x100 mm Each 850.00
29-4530 CI Tee 50 mm bore (Door) Each 300.00
29-4531 - Ditto - but 100 mm (Door) Each 750.00
29-4532 CI Branch Pieces 100 mm Bore (Double) Each 795.00
29-4533 - Ditto - but (Single) Each 550.00
29-4534 Guard Cowl 50 mm bore Each 110.00

639
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4535 - Ditto - but 100 mm bore Each 200.00

29-4536 Guard Cowl uPVC 150 mm bore Each 200.00
29-4537 Lead kg 210.00
29-4538 Gasket / rope wire kg 90.00
29-4539 Clamp with rawl plug & screws for pipe Each 16.00
29-4540 Manhole Cover 375 mm dia Each 900.00
29-4541 - Ditto - but 450 mm dia Each 1,220.00
29-4542 - Ditto - but 525 mm dia Each 1,540.00
29-4543 Push / commode hand shower 12.50 mm for Each 477.00
29-4544 toilet use / Filter (brass) PN20, brand : Itap,
Y Strainer Each 300.00
29-4545 (Italy) 12.50 mm
- Ditto - but 20 mm dia Each 450.00
29-4546 - Ditto - but 25 mm dia Each 675.00
29-4547 - Ditto - but 37.5 mm dia Each 1,360.00
29-4548 - Ditto - but 50 mm dia Each 2,200.00
29-4549 - Ditto - but 75 mm dia Each 4,500.00
29-4550 - Ditto - but 100 mm dia Each 9,500.00
29-4551 Pressure reducer Valve, light model RINOX2, Each 1,607.00
brand : Itap, (Italy) 12.50 mm
29-4552 - Ditto - but 20 mm dia Each 1,875.00
29-4553 - Ditto - but 25 mm dia Each 3,676.00
29-4554 - Ditto - but 37.5 mm dia Each 7,546.00
29-4555 Pressure reducer Valve, Heavy model RINOX, Each 3,094.00
brand : Itap, (Italy) 12.50 mm
29-4556 Each 3,726.00
- Ditto - but 20 mm dia

640
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4557 - Ditto - but 25 mm dia Each 4,225.00

29-4558 - Ditto - but 37.5 mm dia Each 8,062.00
29-4559 Ball Valves for standard flow, brand : Itap, (Italy) 12.50 Each 300.00
29-4560 mm - Ditto - but 20 mm dia
Each 400.00
29-4561 - Ditto - but 25 mm dia Each 450.00
29-4562 - Ditto - but 37.5 mm dia Each 600.00
29-4563 - Ditto - but 25 mm dia Heavy duty Each 2,000.00
foreign made (UK)
29-4564 - Ditto - but 40/37.5 mm dia Each 2,500.00
29-4565 - Ditto - but 50 mm dia 4,000.00
29-4566 Globe Valves working 300 PSIG 100 mm Each 8,000.00
29-4567 (UK/Japan)
- Ditto - but 75 mm dia Each 6,550.00
29-4568 - Ditto - but 50 mm dia Each 5,750.00
29-4569 - Ditto - but 37.5 mm dia Each 4,550.00
29-4570 Air Vent Valves working 300 PSIG 25 mm Each 4,000.00
(UK/ Japan)
29-4571 - Ditto - but 20 mm dia Each 3,500.00
29-4572 - Ditto - but 12.5 mm dia Each 3,000.00
29-4573 Auto Relief Valves working 300 PSIG 50 mm Each 9,000.00
(Italy)
29-4574 - Ditto - but 37.5 mm dia Each 8,000.00
29-4575 - Ditto - but 25 mm dia Each 4,500.00
29-4576 Auto Pressure switch 25 mm (China) Each 6,400.00
29-4577 Pressure gauge 0 to 500 PSIG for 25 mm line Each 3,000.00
(China)
29-4578 Flexible joint 100 mm dia foreign made Each 6,050.00
29-4579 Each 4,400.00
- Ditto - but 75 mm dia

641
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4580 - Ditto - but 50 mm dia Each 4,200.00

29-4581 - Ditto - but 37.5/40 mm dia Each 3,750.00
29-4582 - Ditto - but 25 mm dia Each 2,250.00
29-4583 - Ditto - but 20 mm dia Each 1,700.00
29-4584 - Ditto - but 12.5 mm dia Each 1,250.00
29-4585 Landing Valve 50 mm Each 6,600.00
29-4586 - Ditto - but 37.5/40 mm dia Each 6,400.00
29-4587 - Ditto - but 25 mm dia Each 4,900.00
29-4588 Fire alarm bell foreign made Each 3,900.00
29-4589 Frie break glass switch foreign made Each 2,800.00
29-4590 Central fire control alarm station 16 zone 24 Each 125,000.00
volt DC foreign origin
29-4591 High pressure Multistage in line pump size 25x25 mm
capacity 0.7-3.6M 3/hr, head 152-66, 2.2 kw with motor
foreign made (KSB Holland) complete. Set 154,262.00

29-4592 High pressure Multistage in line pump size 32x32 mm

capacity 1.4-7.2M 3/hr, head 230-110, 4 kw with motor
foreign made (KSB Holland) complete Set 211,237.00

29-4593 High pressure Multistage in line pump size 50x50 mm

capacity 4.3-23.8M 3/hr, head 113-70, 7.5 kw with motor
foreign made (KSB Holland) complete Set 273,251.00

29-4594 High pressure Multistage in line pump size

32x32 mm capacity 1.4-7.2M3/hr, 1.1 kw with Set 75,000.00
motor foreign made (KSB Holland) suitabe for
bosting package unit
29-4595 High pressure Multistage in line pump size
75x75 mm capacity 45-25M3/hr, pressure 3-4
kg, 1.5 kw with motor foreign made (KSB Set 95,000.00
Holland) suitabe for bosting package unit

642
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4596 High pressure Multistage in line pump size

100x100 mm capacity 80-36M3/hr, pressure 3-
4 kg, 3 kw with motor foreign made (KSB Set 165,000.00
Holland) suitabe for bosting package unit

29-4597 High pressure Multistage in line pump size

150x150 mm capacity 80-36M3/hr, pressure
3.5-5 kg, 5.5 kw with motor foreign made (KSB Set 177,200.00
Holland) suitabe for bosting package unit
29-4598 Fire pump centrifugal with motor 3 ph 50 hz,
25 HP foreign origin GPM 150, head 60 M Set 170,000.00
complete
29-4599 Jocky pump multi stage complete with motor
GPM 12, head 60 M foreign origin Set 110,000.00

29-4600 Fire Hydrant Box 100 mm dia vertical riser pipe

complete as spd. Each 6,500.00

29-4601 Pressurised control panel for 4xunit bosting

pumping package unit complete set Set 200,000.00

29-4602 Carbon steel pressure tank 60/75 litre cpacity Each 90,000.00

29-4603 High pressure centrifugal / boosting pump

multistage complete with Vertical induction
single / three phase Motor electric AC 400/220 Set 70,000.00
volt, 50 Hz, HP 2/3 as required. Made in USA /
Italy.
29-4604 Gas chlorinator control unit (Vacuum regulator) Each
165,000.00
capacity 10-50 PPD foreign made (Regal brand set
29-4605 USA)
Chlorine gas ejector unit foreign made (Regal Each 65,000.00
brand USA)
29-4606 Chlorine Test Kit foreign made (USA) Set 25,000.00
29-4607 Chlorine gas empty cylinder capacity 50 kg Each 62,500.00
29-4608 Chlorine gas kg 130.00
29-4609 Chlorine gas leakage detector with sensor alarm
foreign made (Regal brand USA) Each 130,000.00

643
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4610 Gas cylinder weighing scale, capacity 150 kg

foreign made (China) Each 30,000.00
29-4611 Safety Gas Mask Canister type foreign made Each 50,000.00

SPARE PARTS CHLORINATION PLANT

29-4612 Bearing thrust (foreign) no. 6313 NTN Each 2,250.00

29-4613 Bearing thrust (foreign) no. 7311/6312 NTN Each 1,875.00

29-4614 Bearing (foreign) no. 51313 NTN Each 2,250.00

29-4615 Adaptor face seal S-404 Each 625.00

29-4616 Adaptor seal S-406 Each 437.00

29-4617 Bearing for chlorine plant Each 375.00

29-4618 Body back inlet seal S-413 Each 375.00

29-4619 Body seal S-403 Each 175.00

29-4620 Check Valve E-250 Each 2,812.00

29-4621 Check Valve seat gasket G-203 Each 368.00

29-4622 Cylinder Valve Each 4,375.00

29-4623 Diaphragm body seal S-408 Each 625.00

29-4624 Diaphragm Plate seal S-407 Each 500.00

29-4625 Diffuser for chlorine plant Each 2,875.00

29-4626 Ejector / body gasket G-204 Each 375.00

29-4627 Chlorine test tablet DPD-I / DPD-3 Each 12.00

29-4628 Ejector seat 0-ring S-405 Each 312.00

29-4629 Filter Y-275 Each 250.00

29-4630 Gum boot (Rubber) Each 600.00

644
RESTRICTED
 RESTRICTED
SECTION-29

WATER SUPPLY & SANITARY FITTINGS

PART -III

Item No. Description of Materials Unit Rate in Taka Remarks

29-4631 Indicator seal S-301 Each 187.00

29-4632 Lead Gasket Each 194.00

29-4633 Metering tube gasket G-202 Each 250.00

29-4634 Nozzle for chlorine plant Each 3,750.00

29-4635 Rate valve plug seal S-302 Each 430.00

29-4636 Rate valve tool Z-297 Each 396.00

29-4637 Safety Googols Each 537.00

29-4638 Safety Helmet Each 806.00

29-4639 Trolley for cylinder Each 6,875.00

29-4640 Vacuum seal 4-409 Each 362.00

29-4641 Valve seal seat S-402 Each 700.00

29-4642 Vent line bug screen Z-297 Each 375.00

29-4643 Vent seal S-401 Each 237.00

29-4644 High pressure leakproof uPVC/PVC tube 6 to Metre 687.00

12 mm dia for chlorine gas line foreign made
29-4645 Metering tube for chlorine gas 10-50 PPD as Each 7,500.00
reuired length foreign made

29-4646

To Blank

29-4700

645
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks

CONTROL SWITCHES
29-2601 Auto Change Over / Power Transfer Switch 500
Volts TP & N with magnetic contactor and other Each 146,500.00
accessories 100 Amps Foreign made
29-2602
- Ditto - but for 125 to 200 Amps Each 218,600.00
29-2603
-Ditto - but for 250 to 400 Amps Each 302,000.00

29-2604 Automatic Water level Control Switch for 230 volts

SP, Pump Motor up to 3 HP Each 4,250.00

29-2605
-Ditto - but for 400 volt 3 Ph, Pump Motor 10
Each 34,200.00
HP
29-2606
-Ditto - but for 15 to 30 HP Each 51,000.00

29-2607 Change Over switch 500 Volts TP & N 60 Amps

Each 9,000.00
local made
29-2608 -Ditto-but for 100 Amps Each 11,500.00
29-2609 -Ditto-but for 200 Amps Each 15,000.00
29-2610 -Ditto-but for 400 Amps Each 26,000.00
29-2611 -Ditto-but for 500 / 600 Amps Each 38,000.00
29-2612 -Ditto-but for 1000 Amps Each 45,000.00
29-2613 MCB 230 Volt SP (MEM / DORMAN) ENGLAND
/ (AEG / SIEMENS) GARMANY capacity up to 6 Each 778.00
Amps
29-2614 -Ditto - but for 10 to 16 Amps Each 778.00
29-2615 -Ditto - but for 20 to 32 Amps Each 778.00
29-2616 -Ditto - but for 40 to 50 Amps Each 901.00
29-2617 MCB 230 volts SP (Marlin Gerin) FRANCE /
(Legrand / ABB) ITALY, up to 6 Amps Each 477.00

29-2618 -Ditto - but for 10 to 16 Amps Each 477.00

29-2619 -Ditto - but for 20 to 40 Amps Each 633.00
29-2620 -Ditto - but for 50 Amps Each 633.00
29-2621
MCB (LG) KOREA, 230 volts, SP, up to 6 Amps Each 297.00

29-2622 -Ditto - but for 10 to 16 Amps Each 297.00

29-2623 -Ditto - but for 20 to 32 Amps Each 297.00

569
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2624 -Ditto - but for 40 to 50 Amps Each 297.00

570
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2625 MCCB (MEM / DORMAN) England / (AEG /
SIEMENS) Garmany, 400 volts, TP, 15 to 32 Amps Each 10,750.00

29-2626
-Ditto - but for 40 Amps Each 11,825.00

29-2627
-Ditto - but for 60 Amps Each 12,900.00

29-2628
-Ditto - but for 100 Amps (Adjustable ) Each 15,050.00

29-2629
-Ditto - but for 125 Amps (Adjustable ) Each 17,200.00

29-2630
-Ditto - but for 150 Amps (Adjustable) Each 23,650.00

29-2631
-Ditto - but for 200 Amps (Adjustable) Each 25,800.00

29-2632
-Ditto - but for 300/320 Amps (Adjustable ) Each 70,667.00

29-2633
-Ditto - but for 400 Amps (Adjustable ) Each 70,667.00

29-2634
-Ditto - but for 500 Amps (Adjustable ) Each 70,667.00

29-2635
-Ditto - but for 600/630 Amps (Adjustable) Each 75,600.00

29-2636
-Ditto - but for 800 Amps (Adjustable) Each 113,744.00

29-2637
-Ditto - but for 1000 Amps (Adjustable) Each 175,000.00

29-2638 MCCB (Marlin Gerin) FRANCE / (ABB / Legrand)

ITALY, 400 volts, TP, 15 to 40 Amps (Adjustable) Each 9,010.00

29-2639
-Ditto - but for 50 to 63 Amps (Adjustable) Each 9,010.00
29-2640
-Ditto - but for 100 Amps (Adjustable) Each 10,070.00
29-2641
-Ditto - but for 160 Amps (Adjustable) Each 16,960.00
29-2642
-Ditto - but for 320 Amps (Adjustable ) Each 44,520.00
29-2643
-Ditto - but for 400 Amps (Adjustable ) Each 46,640.00
29-2644
-Ditto - but for 500 Amps (Adjustable ) Each 51,940.00
29-2645
-Ditto - but for 630 Amps (Adjustable) Each 54,820.00
29-2646
-Ditto - but for 800 Amps (Adjustable) Each 106,000.00
29-2647
-Ditto - but for 1000 Amps (Adjustable) Each 122,000.00

571
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2648
MCCB (LG) Korea , 400 volts TP, 15 to 32 Amps Each 1,929.00
29-2649
-Ditto - but for 40 to 63 Amps Each 2,163.00
29-2650
-Ditto - but for 100 to 125 Amps Each 2,672.00

572
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2651
-Ditto - but for 150 to 200 Amps Each 5,067.00

29-2652
-Ditto - but for 300 Amps (Adjustable ) Each 11,800.00

29-2653
-Ditto - but for 400 Amps (Adjustable ) Each 11,800.00

29-2654
-Ditto - but for 500 Amps Each 24,719.00

29-2655
-Ditto - but for 600 Amps Each 26,400.00

29-2656
-Ditto - but for 800 Amps (Adjustable) Each 30,337.00

29-2657
-Ditto - but for 1000 Amps (Adjustable) Each 36,450.00

29-2658 DB Cabinet (Dorman / MEM / Legrand brand) for

10-25 MCBs Each 1,850.00

29-2659
- Ditto but for 30-40 MCBs Each 3,620.00

29-2660
Main switch IC, SP 15 Amps Local Each 220.00

29-2661
- Ditto but DP 15 Amps Local Each 195.00

29-2662
- Ditto but TP 15 Amps Local Each 516.00

29-2663
- Ditto but SP 30 Amps Local Each 432.00

29-2664
- Ditto but DP 30 Amps Local Each 195.00

29-2665
- Ditto but TP 30 Amps Local Each 774.00

29-2666
- Ditto but DP 60 Amps Local Each 1,175.00

29-2667
- Ditto but TP 60 Amps Local Each 1,290.00

29-2668
- Ditto but TP & N 100 Amps China / Taiwan Each 2,710.00

29-2669
- Ditto but TP with N 100 Amps Local Each 2,580.00

29-2670
- Ditto but TP with N 200 Amps China / Taiwan Each 4,300.00

29-2671
Plug outlet 2 pin 5 Amps local Each 15.00

29-2672
Plug outlet 3 pin 5 Amps local Each 25.00

573
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2673
Legrand Brand 13 A 3 Pin Plug with fuse (Flat) Each 750.00

29-2674
Plug outlet 3 pin 15 Amps local Each 35.00

29-2675
MK Brand 15 A 3 Pin flat / round Plug Each 195.00

574
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2676
Socket 2 pin bakelite concealed type 5 Amps Each 18.00

29-2677
Socket 2 pin bakelite surface type 5 Amps Each 18.00
29-2678 Socket 2 pin 5 Amps MK (Singapore) / MEM
Each 450.00
(Malaysia)
29-2679 Socket Telephone / Dish MK (Singapore) / MEM
(Malaysia) Each 575.00

29-2680
Socket TV MK (Singapore) / MEM (Malaysia) Each 827.00

29-2681
Legrand Brand 2 Pin Socket with switch concealed Each 850.00

29-2682
Legrand Brand 2 Pin Socket without switch concealed Each 550.00

29-2683 Switch SP socket outlet 3 pin combined concealed

type 5 Amps local Each 65.00

29-2684 Switch SP socket outlet 3 pin combined surface type

5 Amps local Each 110.00

29-2685 Switch SP socket shutter pattern outlet 3 pin

Combined concealed type 5 Amps MK England Each 575.00

29-2686 Switch SP socket outlet 3 pin Combined concealed

type 15 Amps local Each 125.00

29-2687 Switch SP socket outlet 3 pin combined surface type

15 Amps local Each 190.00

29-2688 Switch SP Socket 3 pin 13/15 Amps shuttered

pattern MK (Singapore) / MEM (Malaysia) Each 230.00

29-2689 Switch SP socket outlet 3 (flat / round) Pin

Combined surface / concealed type 13 / 15 Amps Each 698.00
MK/MEM (Singapore / Malaysia) / Switch flame
proof 5 amps 2 way
29-2690 Switch SP Socket 3 pin 5 Amps shuttered pattern
MK (Singapore) / MEM (Malaysia) Each 575.00

29-2691 - Ditto but stainless steel body 15A, MK / MEM

Each 750.00
England
29-2692
Legrand Brand 15 A 3 Pin Socket (Round) Each 530.00

29-2693
- Ditto but 15 A 3 Pin Socket with Switch (Round) Each 580.00

29-2694
- Ditto but 15 A 3 Pin Socket with Switch and Neon (Flat)
Each 675.00

575
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2695
- Ditto but 13 A 3 Pin Socket (Flat) Each 530.00

29-2696
- Ditto but 13 A 3 Pin Socket with Switch (Flat) Each 580.00

29-2697
- Ditto but 13 A 3 Pin Socket with Switch and Neon (Flat)
Each 620.00

29-2698 Bell push SP surface / piano / suspension type 5

Each 20.00
Amps
29-2699
Legrand Brand bell push Each 480.00
29-2700 Bell push MK (Singapore) / MEM (Malaysia) 5
Each 371.00
Amps
29-2701
Switch SP bakelite surface type 5 Amps one way Each 22.00

29-2702
Switch SP bakelite surface type 5 Amps two way Each 30.75

29-2703
Switch SP bakelite surface type 15 Amps one way Each 65.00

29-2704
Switch SP bakelite surface type 15 Amps two way Each 68.00

29-2705 Switch SP bakelite concealed piano type 5 Amps Each 21.00

one way
29-2706
- Ditto - but 2 Way Each 66.00

29-2707 Switch SP bakelite concealed piano type 15 Amps

Each 65.00
one way
29-2708
- Ditto - but 2 Way Each 67.00

29-2709
Switch bakelite suspension type 5 Amps one way Each 19.00

29-2710
- Ditto - but 2 Way Each 33.00

29-2711
Legrand Brand Switch 1 Gang 1 Way Each 143.00

29-2712
- Ditto - but for 1 Gang 2 Way Each 172.00

29-2713
- Ditto - for 2 Gang 1 Way Each 225.00

29-2714
- Ditto - but for 2 Gang 2 Way Each 256.00

29-2715
- Ditto - but for 3 Gang 1 Way Each 371.00

29-2716
- Ditto - but for 4 Gang 1 Way Each 600.00

576
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2717 MK (Singapore) / MEM (Malaysia) Switch 5 Amps
1 way 1 gang Each 210.00

29-2718
-Ditto - but 2 gang Each 280.00

29-2719
-Ditto - but 3 gang Each 360.00

29-2720
-Ditto - but 4 gang Each 583.00

29-2721 Selector switch for Volt Metre (Japan / England / Each 750.00
French)
29-2722 Selector switch for CT AmMetre (Japan / England /
Each 850.00
French)
29-2723 Switch SP flame proof surface/concealed type one
way 5 amps mounted in malleable cast iron box Each 450.00

29-2724
Switch water tight 1 way Each 295.00

29-2725
Switch water tight 2 way Each 380.00

29-2726
Flame Proof Switch 15 Amps 1 way foreign made Each 683.00

29-2727
ABB (Singapore) switch 5 amps 1 Gang 1 way Each 146.00

29-2728
- Ditto - but 1 gang 2 way Each 178.00

29-2729
- Ditto - but 2 gang 1 way Each 303.00

29-2730
- Ditto - but 2 gang 2 way Each 340.00

29-2731
- Ditto - but 3 gang 1 way Each 360.00

29-2732
- Ditto - but 4 gang 1 way Each 583.00

29-2733
- Ditto - but 5 gang 1 way Each 625.00

29-2734
- Ditto - but intermediate switch Each 520.00

29-2735
- Ditto - but bell push Each 310.00

29-2736
- Ditto - but Rotary dimmer 600w (Fan controller) Each 1,290.00

29-2737

To
Blank
577
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
Blank
29-2800

578
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks

MISCELLANIES
29-2801 Steel Tubular pole as per drawing type 'A' 9 Each 13,795.00
metre height, weight not less than 150 Kg

29-2802 -Ditto-but type 'AA' 9 metre height made with Each 18,803.00
other than NTL tube,'

29-2803 -Ditto-but type 'B' 11 metre height, weight not Each 14,502.00
less than 185 Kg

29-2804 -Ditto-but type 'C' 12 metre height, weight not Each 16,546.00
less than 210 Kg

29-2805 -Ditto-but type 'D' 9 metre height made with Each 11,203.00
other than NTL tube.

29-2806 Pole Steel tubular type "DD" 9 M height made Each 11,454.00
with other than NTL tube

29-2807 Pole Steel Street/Garden type "E", weight not

less than 105 Kg Each 8,305.00

29-2808 P C Pole (RCC) PDB / REB type 9/10 metre

Each 16,300.00
height
29-2809 P C Pole (RCC) PDB / REB type 11 metre
Each 19,760.00
height
29-2810 P C Pole (RCC) PDB / REB type 12 metre
Each 23,000.00
height
29-2811 Insulator Pin type Glazed porcelain vitreous of
glass caps for LT Each 94.00

29-2812 - Ditto - but for HT 11 KV Each 335.00

29-2813 - Ditto - but for Disk type Each 750.00
29-2814 Insulator Shackle for LT 100 x 112 mm Each 70.00
29-2815 - Ditto - but for LT 75 x 87 mm Each 60.00
29-2816 Insulator Strain / EGG type Each 65.00
29-2817 - Ditto - but for STAR type Each 70.00
29-2818 Guy Insulator Each 90.00
29-2819 Stay / Guy assembly Each 60.00
29-2820 Stay / Guy wire GI Stranded Kg 285.00
29-2821 Tension / Straining Clamps for 11 KV disk
Each 290.00
insulator
29-2822 Tension / Straining Clamps for Stay Each 300.00
29-2823 Aluminium conductor standard (AAC) Kg 550.00

579
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2824 - Ditto - but (ACSR) Kg 600.00

580
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2825 Aluminium conductor steel reinforced (ACSR)
BS: 215 Part-2 : 1970 & BDS 1037: 1983 & Kg 600.00
ASTM B-232/74)
29-2826 All Aluminium Alloy conductor (AAAC) stranded
ASTM B 399: 86 Kg 550.00

29-2827 Insulated Aluminium stranded Conductor (Type

-8) BS 6485 & BS 215, Part-1 MIDGE (22 mm2) Metre 54.00

29-2828
-Ditto- but GNAT (25 mm2) Metre 54.00

29-2829
-Ditto- but ANT (50 mm2) Metre 102.00

29-2830
-Ditto- but EARWIG (75 mm2) Metre 124.00

29-2831
-Ditto- but WASP (100 mm2) Metre 150.00

29-2832 Insulated Aluminium Conductor steel reinforced

(ACSR) SQUIRAL (20.97 mm )
2 Metre 48.16

29-2833
-Ditto- but (ACSR) GOPHER (26.23 mm2) Metre 59.86

29-2834
-Ditto- but (ACSR) WEASEL (31.61 mm2) Metre 72.00

29-2835
-Ditto- but (ACSR) FERRET (42.39 mm2) Metre 96.00

29-2836
-Ditto- but (ACSR) RABBIT (52.85 mm) Metre 123.86

29-2837
-Ditto- but (ACSR) DOG (104.93 mm2) Metre 227.32

29-2838 Insulated (XLPE) Aluminium Conductor steel

Metre 56.00
reinforced (ACSR) SQUIRAL (20.97 mm2)
29-2839
-Ditto- but (ACSR) GOPHER (26.23 mm2) Metre 92.00

29-2840
-Ditto- but (ACSR) WEASEL (31.61 mm2) Metre 74.00

29-2841
-Ditto- but (ACSR) FERRET (42.39 mm2) Metre 104.00

29-2842
-Ditto- but (ACSR) RABBIT (52.85 mm) Metre 148.00

29-2843
-Ditto- but (ACSR) DOG (104.93 mm2) Metre 185.00

29-2844 Copper Conductor Hard drawn bare/stranded Kg 750.00

(GAZI)

581
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2845
Copper conductor bare solid/stranded Kg 750.00

29-2846
Copper Strip 25 x 3 mm Kg 850.00

582
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2847
Copper Bar Kg 750.00

29-2848
Dry Powder fire extinguisher (China/Local) 2 kg Each 1,875.00

29-2849
- Ditto - but for 3 kg Each 2,100.00

29-2850
- Ditto - but for 5 kg Each 3,400.00

29-2851 Foam type fire extinguisher (China/Local) 10

Each 1,300.00
Litre
29-2852
-Ditto-but for 8 Litre Each 1,100.00

29-2853 Soda water type fire extinguisher (China/Local) Each 1,200.00

10 Litre
29-2854
-Ditto-but for 8 ltr Each 1,050.00

29-2855 Steel conduit heavy gauge welded class 'B' BS-

31 dia 19 mm Metre 210.00

29-2856
-Ditto-but for 25 mm Metre 310.00

29-2857 Steel conduit solid drawn for flame proof wiring

dia 19 mm Metre 250.00

29-2858
- Ditto - but for 25 mm Metre 330.00

29-2859 PVC conduit gde "D" Aziz / BRB / Rina / Lira /

RFL or any other approved brand dia 16 mm Metre 20.40

29-2860
-Ditto-but 20 mm gde "D" Metre 27.00

29-2861
-Ditto-but 25 mm gde "D" Metre 38.00

29-2862 Plastic Channel ( Brand NPI / Aziz / BRB )

Metre 14.50
width 10 mm
29-2863
- Ditto - but 16 mm Metre 20.00
29-2864
- Ditto - but 20 mm Metre 23.00
29-2865
- Ditto - but 25 mm Metre 28.00
29-2866
- Ditto - but 30 mm Metre 36.00
29-2867
- Ditto - but 40 mm Metre 41.00
29-2868
PVC Circular box 1 way Each 11.00
29-2869
- Ditto - but 2 way Each 13.00

583
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2870
- Ditto - but 3 way Each 15.00
29-2871
- Ditto - but 4 way Each 18.00

584
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2872 PVC Conduit fittings (Tee, Bend, Elbow,
Coupler, Adopter etc) up to 20 mm dia Each 7.00

29-2873
- Ditto - but over 20 mm dia Each 8.00

29-2874 Steel Conduit fittings (Tee, Bend, Elbow,

Coupler, Adopter etc.) up to 20 mm dia Each 16.00

29-2875
- Ditto - but over 20 mm dia Each 20.00

29-2876 Circular Box (Steel)

Each 23.00

29-2877 Ceramics tiles 300x50x75 mm (Cable Cover)

M Nos 15,500.00

29-2878 Ceramics tiles 300x78x125 mm (Cable Cover)

M Nos 18,800.00

29-2879 Ceramics tiles 300x100x150 mm (Cable

M Nos 24,000.00
Cover)
29-2880 Fuse aerial 5 amps
Each 23.00

29-2881 Fuse aerial 10 amps

Each 24.00

29-2882 Fuse aerial 15 amps

Each 29.00

29-2883 Fuse aerial 30 amps

Each 40.00

29-2884 Fuse aerial 60 amps

Each 96.50
29-2885 Fuse aerial 100 amps
Each 130.00

29-2886 Porcelain Fuse cut out 5 Amps China/Taiwan

Each 20.00

29-2887 Porcelain Fuse cut out 15 Amps China/Taiwan

Each 30.00

29-2888 Porcelain Fuse cut out 30 Amps China/Taiwan

Each 43.00

29-2889 Porcelain Fuse cut out 60 Amps China /Taiwan

Each 85.00

29-2890 Porcelain Fuse cut out 100 Amps China/Taiwan

Each 127.00

29-2891 Porcelain Fuse cut out 200 Amps China/Taiwan

Each 37.00

29-2892 Aluminium link clips off sizes

Gross 48.00

29-2893 Brass link clips off sizes

Gross 90.00

585
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2894
Brass / copper screw 12- 20 mm Doz 42.00

29-2895
Brass/copper screw 25-30 mm Doz 42.00

29-2896
Brass / copper nails 12- 20 mm Kg 1,000.00

29-2897
Copper nut bolts 25 x 10 mm Each 26.00

29-2898
Connecting / Soldering Lugs /Socket (Brass) Kg 950.00

29-2899 Under ground cable joint box with kit (straight

Each 2,500.00
through) for PVC LT 1x16-50 mm2
29-2900
- Ditto - but for LT 2x16-50 mm2 Each 3,500.00

29-2901
- Ditto - but LT 3x16-50 mm2 Each 4,500.00

29-2902 - Ditto - but LT 31/2 or 4 x 16-50 mm2

Each 5,500.00

29-2903
- Ditto - but LT 1x70-150 mm2 Each 3,000.00

29-2904
- Ditto - but LT 2x70-150 mm2 Each 3,900.00

29-2905
- Ditto - but LT 3x70-150 mm2 Each 5,000.00

29-2906
- Ditto - but LT 3.5 or 4x70-150 mm2 Each 6,000.00

29-2907
- Ditto - but LT above 1x150 mm2 Each 5,000.00

29-2908
- Ditto - but LT above 2x150 mm2 Each 5,000.00

29-2909
- Ditto - but LT above 3x150 mm2 Each 5,800.00

29-2910
- Ditto - but LT above 3.5 or 4x150 mm2 Each 60,000.00

29-2911 Cable joint straight through for HT Armoured

Each 40,000.00
1x16-50 mm2
29-2912
- Ditto - but HT Armoured 3x16-50 mm2 Each 7,200.00

29-2913 Cable joint straight through HT Armoured over

Each 5,000.00
1x50 mm2
29-2914 - Ditto - but HT Armoured over 3x50 mm2
Each 8,000.00

29-2915 Cable rout and Joint sign plate

Each 1,000.00

586
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2916 Compound foreign made
kg 390.00

29-2917 Heat and shrinks kit for 11KV single core cable
Each 2,900.00

29-2918 Heat and shrinks kit for 11KV three core cable
Each 6,000.00

587
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2919 Nut bolt off size Brass / Galvanized
Each 42.00

29-2920 Nut bolt off Size local

Kg 128.00

29-2921 Washer for Nut Bolts

Each 3.00

29-2922 Nuts Bolts 50 mm x 16 mm dia

Each 18.00

29-2923 Nuts Bolts 120 mm x 20 mm dia

Each 29.00

29-2924 PVC/ Plastic Rowel Plug

Gross 50.00

29-2925 Wood Pin Teak

Gross 270.00

29-2926 Salt coarse

Kg 18.00

29-2927 Charcoal local

Kg 35.00

29-2928 Tape Insulation

Roll 18.00

29-2929 Tape Ampere foreign

Roll 250.00

29-2930 Tape PIB foreign (England / Germany)

Roll 260.00

29-2931 Varnish Insulation Nitto Japan

Litre 900.00

29-2932 -Ditto - but local

Litre 350.00

29-2933 Varnish shellac local

Litre 250.00

29-2934 Lock with Handle for MDB / SDB box

Each 380.00

29-2935 Pulley with steel rope for Pendant light

Each 110.00

29-2936 Panel type Ammeter 0-50 A range (China/ Each 430.00

Korea/ Taiwan)
29-2937 -Ditto-but made in (Japan/Germany/
Each 950.00
England)
29-2938 Panel type CT Ammeter 0-200 A range (China / Korea / Each 695.00
Taiwan)

29-2939 Panel type CT Ammeter 500 / over 500 A range (China / Each 8,010.00
Korea / Taiwan)

588
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2940 Panel type CT Ammeter Over 0-100 A range (China / Korea Each 650.00
/ Taiwan)

29-2941 Panel type Indicating lamps (Taiwan) complete Each 135.00

589
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2942 Panel type volt Metre 0- 500 V range ( China / Each 750.00
Korea / Taiwan)

29-2943 -Ditto -but made in (Japan / Germany / Each 1,050.00

England)
29-2944
CT 100 - 500 / 5 for LT Each 900.00

29-2945
CT over 500 / 5 for LT Each 1,150.00

29-2946
Bell electric bakelite AC Each 85.00

29-2947
Buzzer electric bakelite AC Each 80.00

29-2948
Door bell electric AC (Ding Dong ) Each 195.00

29-2949
Door bell electric AC (Musical ) Each 230.00

29-2950
Door bell electric DC (Musical ) Each 230.00

29-2951 Electrical/ Electronic call system from 3 Each 7,100.00

Channel
29-2952 Electrical/ Electronic call system additional Each 1,050.00
Channel
29-2953 Ebonite sheet 2.5 mm thick Sqm 1,100.00

29-2954 Ebonite sheet 3mm thick Sqm 1,400.00

29-2955 Ebonite sheet 4mm thick Sqm 1,600.00

29-2956 Energy Metre electric AC 230 volts SP up to 40 Each 2,000.00

Amps
29-2957 Energy Meter electric TP up to 50 Amps Each 5,600.00

29-2958 Energy Metre electric TP 60-200 Amps with CT Each 10,000.00

/ PT
29-2959 Wooden batten (ctg teak) 12 x 12 mm Metre 14.00

29-2960
- Ditto - but 12 x 19 Metre 18.00

29-2961
- Ditto - but 12 x 25 Metre 24.00

29-2962
- Ditto - but 12 x 30 Metre 40.00

29-2963
- Ditto - but 12 x 40 Metre 50.00

590
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2964
- Ditto - but 25 x 40 Metre 60.00

591
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2965
Wooden switch board 100x 100 x 35 mm Each 32.00

29-2966
-Ditto - but 150x100x35 mm Each 40.00

29-2967
-Ditto - but 200x150x35 mm Each 55.00

29-2968
-Ditto - but 250x200x35 mm Each 75.00

29-2969
-Ditto - but 300x250x35 mm Each 85.00

29-2970
-Ditto - but 400x300x50 mm Each 185.00

29-2971
-Ditto - but 500x400x50 mm Each 250.00

29-2972
Wooden block 75x75x35 mm round Each 25.00

29-2973
Plastic switch board 100x100x35 mm Each 32.00

29-2974
-Ditto - but 150x100x35 mm Each 40.00

29-2975
-Ditto - but 200x150x35 mm Each 55.00

29-2976
-Ditto - but 250x200x35 mm Each 75.00

29-2977
Electronic digital clock size 12.5"x4"z3.5" Each 3,710.00

29-2978
UPS 1000 VA with 30 min backup Each 55,000.00

29-2979
Electronic Light Dimmer Each 901.00

29-2980
Voltage Stabilizer 500 VA SP Each 5,500.00

29-2981
Voltage Stabilizer 1000 VA SP Each 8,600.00

29-2982
Voltage Stabilizer 1500 VA SP Each 16,000.00

29-2983 18 BG Switch box /board size 250 x 150 x 100 Each 95.00
mm
29-2984
-Ditto - but 300 x 250 x 100 mm Each 140.00

29-2985
20 BG Switch box/ board size 100x75 x 75 mm Each 38.00

29-2986
-Ditto - but 75 x 75 x 75 mm Each 35.00

592
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2987
-Ditto - but 150 x 100 x 75 mm Each 40.00

29-2988
-Ditto - but 200 x 150 x 75 mm Each 65.00

29-2989
-Ditto - but 250 x 200 x 75 mm Each 75.00

593
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-2990 Fibre Glass / DB Cabinet having 12-15 nos x
MCB fixing arrangement (DORMAN / MEM) Each 2,500.00

29-2991 Steel Almirah type cubical panel box as spd in

Cu.m 25,000.00
sch
29-2992 DB / MDB / SDB Steel Box 450x330x110 mm
18/20 BG GI sheet Each 3,000.00

29-2993
- Ditto - but size 700x600x110 mm Each 3,900.00

29-2994
- Ditto - size 900x750x110 mm Each 4,600.00

29-2995
PG Clamp (Bimetallic) / U Clamps / Line Taps Each 105.00

29-2996 Anti Climbable devices made with MS/FI round Each 315.00
bars
29-2997 Air termination rod with brass/bronze base Each 1,200.00
100x100x6 mm
29-2998 M S / F I Bar Clamps for Pole band Pair 200.00

29-2999 Service Bale PDB type Each 80.00

29-3000 Service drawing distribution box Each 600.00

29-3001 Distribution Board 2 Way 15 Amps Each 450.00

29-3002 Distribution Board 2 Way 30 Amps Each 750.00

29-3003 Distribution Board Additional Way 15 Amps Each 35.00

29-3004 Distribution Board Additional Way 30 Amps Each 50.00

29-3005 Distribution Bus bar 60 A 3 Bar Each 1,700.00

29-3006 Distribution Bus bar 100 A 3 Bar Each 2,300.00

29-3007 Distribution Bus bar 500 A 3 Bar Each 4,500.00

29-3008 Distribution Bus bar 60 A 4 Bar Each 2,100.00

29-3009 Distribution Busber100 A 4 Bar Each 3,200.00

29-3010 Distribution Bus bar 500 A 4 Bar Each 5,800.00

594
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-3011 Joint / End termination Heats and Shrink Kit for Set 7,200.00
11 KV Cable set of 3 Nos

29-3012 Winding wire Supper enamel copper 14 - 20 Kg 1,200.00

SWG
29-3013 -Ditto- but 21-28 SWG Kg 1,200.00

29-3014 -Ditto- but 29-36 SWG Kg 1,272.00

29-3015 -Ditto- but 37-46 SWG Kg 1,272.00

29-3016
29-3017 Blank
29-3018

FAN AND SPARES

29-3019 Ceiling Fan 1400 mm Deluxe (GEC) without Each 3,438.00

regulator
29-3020 - Ditto - but Deluxe (GEC) with electronics Each 3,588.00
regulator
29-3021 Ceiling Fan 1200 mm Deluxe (GEC) without Each 3,330.00
regulator
29-3022 - Ditto - Deluxe (GEC) with electronic regulator Each 3,480.00

29-3023 Ceiling Fan 1400 mm Deluxe (Habib) with Each 3,542.00

reulator
29-3023A Ceiling Fan 1400 mm Popular (Habib) with Each 2,700.00
reulator
29-3024 - Ditto - but1400 mm Econo (Habib) with Each 2,600.00
reulator
29-3025 Ceiling Fan 1200 mm Deluxe (Habib) with Each 3,000.00
reulator
29-3026 - Ditto - but 1200 mm Econo (Habib) with Each 2,800.00
reulator
29-3027 Ceiling Fan 900 mm sweep Deluxe (Habib) with Each 2,700.00
reulator
29-3028 Ceiling fan 1400 mm Deluxe (Jamuna) with Each 2,482.00
reulator
29-3029 - Ditto - but 1400 mm Luxury (Jamuna) with Each 2,747.00
reulator
29-3030 - Ditto - but 1400 mm Super Luxury (Jamuna) Each 3,065.00
with reulator
29-3031 - Ditto - but 1200 Super Deluxe (Jamuna) with Each 2,535.00
reulator
29-3032 Ceiling fan 1400 mm Deluxe (National Tongi) Each 2,641.00
with reulator

595
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-3033 Ceiling fan 1200 mm Deluxe (Natinal Tongi) Each 2,535.00
with reulator
29-3034 Ceiling fan 900 mm Deluxe (Natinal Tongi) with Each 2,270.00
reulator
29-3035 Ceiling Fan 1400/1300 mm sweep (SINGER) Each 3,200.00
with reulator
29-3036 Wall / Cabin fan Plastic body, 300-400 mm sweep, AC 220
volt, 50 Hz complete with blade, regulator, connecting cord,
safety guard etc (China) Each 2,400.00

29-3037 Pedestal fan Plastic body steel stand, 300-400 mm sweep,

AC 220 volt, 50 Hz complete with blade, regulator,
connecting cord, safety guard etc (China) Each 3,600.00

29-3038 Pedestal fan steel body standard size, 500-600 mm sweep

complete with all accessories (GFC Pakistan) Each 6,500.00

29-3039 Ceiling Fan 600 mm 4 blade Hi-speed any Each 2,400.00

brand
29-3040
Exhaust Fan 300 mm GEC Each 4,146.00
29-3041 - Ditto - but 400 mm GEC Each 4,800.00
29-3042 Exhaust Fan 300 mm, National, Tongi / other Each 2,100.00
approved brand
29-3043
- Ditto - but 400 mm Each 2,300.00
29-3044 Exhaust Fan 200-300 mm Plastic body (China) Each 1,300.00

29-3045 Capacitor up to 3 microfarad Each 70.00

29-3046 Ceiling rose bakelite Each 18.00
29-3047 Ceiling Fan Blade Each 200.00
29-3048 Table / Exhaust Fan Blade Each 250.00
29-3049 Ball bearing for fan NTN (Japan) Each 130.00
29-3050 Ball bearing for fan (Korea / China) Each 75.00
29-3051 Insulator for fan down rod Each 8.00
29-3052 Nut & bolts for insulator Each 13.00
29-3053 Split Pin for C/fan Each 4.00
29-3054 Regulator for fan (Electronics) Each 150.00
29-3055 Regulator for fan (Inductive) Each 250.00
29-3056 Clamp hock for C/fan Each 300.00
29-3057 Number Stamping Set 0 to 9 (10 mm size) Set 1,000.00

596
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
Item no Description of Materials Unit Rate in Taka Remarks
29-3058

To Blank

25-3200

597
RESTRICTED
 RESTRICTED
SECTION-29
RATE TABLE (With Carrying Charges)
ELECTRIFICATION
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC sheathed BS 6004/6004 : 84, BDS 900 : 79 Rated
Voltage 250/440 volts.

29-2201 IYYL / BYM 1 x 1.3 rm Metre 26.39 26.56 -

29-2202 - Ditto - but 1 x 1.5 rm (3/.036) Metre 27.08 27.40 -

29-2203 - Ditto - but 1 x 2.5 rm (7/.029) Metre 41.76 43.29 -

29-2204 - Ditto - but 1x 4 rm (7/.036) Metre 63.75 65.95 -

29-2205 - Ditto - but 1x 6 rm (7/.044) Metre 92.64 95.96 -

29-2206 - Ditto - but 1 x 9.5 rm (7/.052) Metre 155.49 155.49 -

29-2207 - Ditto - but 1 x 14.5 rm (7/.064) Metre 222.32 222.32 -

Cable PVC insulated non-sheathed single core BS 2004 & 6004 : 84, BDS 900 : 79 Rated
Voltage 250/440 volts.

IYAL/BYA -
29-2208 1 x 1.3 rm (3/.029) Metre 20.96 22.04 -
FR/ FRLS

29-2209 - Ditto - but 1 x 1.5 rm (3/.036) Metre 21.46 22.53 -

29-2210 - Ditto - but 1 x 2.5 rm (7/.029) Metre 34.66 35.55 -

29-2211 - Ditto - but 1x 4 rm (7/.036) Metre 54.64 55.38 -

29-2212 - Ditto - but 1x 6 rm (7/.044) Metre 82.04 83.23 -

29-2213 - Ditto - but 1 x 14.5 rm (7/.052) Metre 195.72 203.64 -

29-2214 - Ditto - but 1 x 16 rm (7/.064) Metre 214.59 221.94

Cable PVC insulated Field limiting semi conducting layers over conductor and core,
copper shield over core & PVC overall sheathed 5.8/10 KV VDE-0271/3.69, BDS 901 :
79 Rated permissable service Voltage 7000/12000 volts.

29-2215 NYHSY-HT 1 x 50 rm Metre 1291.41 1320.00 -

29-2216 - Ditto - but 1 x 70 rm Metre 1636.17 1695.50 -

29-2217 - Ditto - but 1 x 95 rm Metre 2061.89 2103.00 -

29-2218 - Ditto - but 1 x 120 rm Metre 2464.03 2507.30 -

553
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2219 - Ditto - but 1 x 185 rm Metre 3496.54 3501.00 -

29-2220 - Ditto - but 1 x 240 rm Metre 4387.11 4450.50 -

554
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC non - sheathed BS 2004 / 6004 : 84, BDS 900 : 79 Rated
Voltage 250/440 volts.

29-2221 IYAL / BYA 1 x 1.3 rm (3/.029) Metre 20.96 22.04 -

29-2222 - Ditto - but 1 x 1.5 rm (3/.036) Metre 21.46 22.53 -

29-2222A - Ditto - but 1 x 1.5 rm (7/.029) Metre 34.66 35.55 -

29-2223 - Ditto - but 1 x 2.5 rm (7/.029) Metre 34.66 35.55 -

29-2224 - Ditto - but 1x 4 rm (7/.036) Metre 54.64 55.35 -

29-2225 - Ditto - but 1x 6 rm (7/.044) Metre 82.04 83.23 -

29-2226 - Ditto - but 1 x 9.5 rm (7/.052) Metre - 137.08 -

29-2227 - Ditto - but 1 x 14.5 rm (7/.064) Metre 196.72 203.64 -

Cable PVC insulated and PVC sheathed Flat Twin core BS : 2004 & 6004/84 BDS
900/79 Rated Voltage 250/400 volts.

29-2228 BYFY 2 x 1.3 rm (3/.029) Metre 36.57 48.51 -

29-2229 - Ditto - but 2 x 1.5 rm (3/.036) Metre 52.34 54.28 -

29-2230 - Ditto - but 2 x 2.5 rm (7/.029) Metre 83.64 86.66 -

29-2231 - Ditto - but 2x 4 rm (7/.036) Metre 128.57 133.21 -

29-2232 - Ditto - but 2x 6 rm (7/.044) Metre 186.77 193.53 -

29-2233 - Ditto - but 2 x 10 rm (7/.052) Metre 0.00 317.24 -

29-2234 - Ditto - but 2 x 16 rm (7/.064) Metre 0.00 488.34 -

Cable PVC insulated and PVC sheathed VDE 0271/3.69, BDS 901 / 79 Rated Voltage
600/1000 volts.
NYY /
29-2235 1 x 1.5 re (7-w) Metre 40.28 44.60 44.60
N2XY
29-2236 - Ditto - but 1 x 2.5 re (7-w) Metre 57.98 62.37 62.37
29-2237 - Ditto - but 1x 4 rm (7-w) Metre 85.75 92.18 92.18

29-2238 - Ditto - but 1x 6 rm (7-w) Metre 122.00 131.24 131.24

29-2239 - Ditto - but 1 x 10 rm (7-w) Metre 185.60 199.53 199.53

29-2240 - Ditto - but 1 x 16 rm (7-w) Metre 281.75 303.07 303.07

29-2241 - Ditto - but 1 x 25 rm (7-w) Metre 431.31 454.57 454.57

29-2242 - Ditto - but 1 x 25 rm (19-w) Metre 0.00 466.38 466.38

555
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2243 - Ditto - but 1 x 35 rm (19-w) Metre 573.88 615.88 615.88

29-2244 - Ditto - but 1 x 50 rm (19-w) Metre 826.27 870.80 870.80

29-2245 - Ditto - but 1 x 70 rm (19-w) Metre 1141.30 1227.19 1227.19

556
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
Cable PVC insulated and PVC sheathed VDE 0271/3.69, BDS 901 / 79 Rated Voltage 600/1000
volts.
NYY /
29-2246 N2XY 1 x 95 rm (19-w) Metre 1527.04 1642.19 1642.19

29-2247 - Ditto - but 1 x 120 rm (37-w) Metre 1914.25 2058.33 2058.33

29-2248 - Ditto - but 1 x 150 rm (37-w) Metre 2387.06 2566.75 2566.75

29-2249 - Ditto - but 1 x 185 rm (37-w) Metre 2942.34 3163.94 3163.94

29-2250 - Ditto - but 1 x 240 rm (61-w) Metre 3812.18 4099.21 4099.21

29-2251 - Ditto - but 1 x 300 rm (61-w) Metre 4734.49 5090.96 5090.96

29-2252 - Ditto - but 1 x 400 rm (61-w) Metre 6304.55 6778.74 6778.74

29-2253 - Ditto - but 1 x 500 rm (61-w) Metre 7865.04 8456.93 8456.93
29-2254 - Ditto - but 1 x 630 rm (127-w) Metre 9916.83 10663.14 10663.14

29-2255 - Ditto - but 1 x 800 rm (127-w) Metre 0.00 0.00 0.00

29-2256 - Ditto - but 1 x 1000 rm (127-w) Metre 0.00 0.00 0.00

NYY /
29-2257 2 x 1.5 re (1-w) Metre 99.20 106.63 106.63
N2XY
29-2258 - Ditto - but 2 x 1.5 rm (7-w) Metre 102.39 110.00 110.00

29-2259 - Ditto - but 2 x 2.5 re (1-w) Metre 140.53 151.07 151.07

29-2260 - Ditto - but 2 x 2.5 rm (7-w) Metre 143.31 153.94 153.94
29-2261 - Ditto - but 2x 4 rm (7-w) Metre 204.00 219.28 219.28
29-2262 - Ditto - but 2x 6 rm (7-w) Metre 280.90 301.96 301.96

29-2263 - Ditto - but 2 x 10 rm (7-w) Metre 425.27 457.05 457.05

29-2264 - Ditto - but 2 x 16 rm (7-w) Metre 626.99 674.30 674.30

29-2265 - Ditto - but 2 x 25 rm (7-w) Metre 971.38 1044.57 1044.57

29-2266 - Ditto - but 2 x 35 rm (19-w) Metre 0.00 1397.52 1397.52

NYY /
29-2267 N2XY 3 x 1.5 re (1-w) Metre 100.50 134.96 134.96

29-2268 - Ditto - but 3 x 1.5 rm (7-w) Metre 129.10 138.97 138.97

29-2269 - Ditto - but 3 x 2.5 re (1-w) Metre 180.51 194.13 194.13

29-2270 - Ditto - but 3 x 2.5 rm (7-w) Metre 185.81 199.77 199.77

29-2271 - Ditto - but 3x 4 rm (7-w) Metre 272.00 292.68 292.68

29-2272 - Ditto - but 3x 6 rm (7-w) Metre 379.05 407.48 407.48

557
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC sheathed VDE 0271/3.69, BDS 901 / 79 Rated Voltage
600/1000 volts.

NYY /
29-2273 N2XY 3 x 10 rm (7-w) Metre 583.42 627.20 627.20

29-2274 - Ditto - but 3 x 16 rm (7-w) Metre 895.55 963.02 963.02

29-2275 - Ditto - but 3 x 25 rm (7-w) Metre 1376.62 1480.41 1480.41

29-2276 - Ditto - but 3 x 35 sm (19-w) Metre 1757.69 1890.00 1890.00

29-2277 - Ditto - but 3 x 50 sm (19-w) Metre 2493.33 2681.14 2681.14

29-2278 - Ditto - but 3 x 70 sm (19-w) Metre 3447.54 3706.93 3706.93

29-2279 - Ditto - but 3 x 95 sm (19-w) Metre 4644.70 4994.17 4994.17

29-2280 - Ditto - but 3 x 120 sm (37-w) Metre 5818.07 6255.86 6255.86

29-2281 - Ditto - but 3 x 150 sm (37-w) Metre 7245.36 7790.59 7790.59

29-2282 - Ditto - but 3 x 185 sm (37-w) Metre 8956.47 9630.41 9630.41

29-2283 - Ditto - but 3 x 240 sm (61-w) Metre 11596.93 12469.42 12469.42

29-2284 - Ditto - but 3 x 300 sm (61-w) Metre 14459.67 18366.60 18366.60

29-2285 - Ditto - but 3 x 400 rm (61-w) Metre 0.00 15547.58 15547.58

29-2286 - Ditto - but 3 x 500 rm (61-w) Metre 0.00 0.00 0.00

29-2287 - Ditto - but 3 x 630 rm (61-w) Metre 0.00 0.00 0.00

0.00
NYY / 1
29-2288 N2XY 3 /2 x 25/16 rm (7/7-w) Metre 1661.55 1661.34 1661.34

29-2289 - Ditto - but 31/2 x 35/16 sm (19/7-w) Metre 2072.30 2228.38 2228.38

29-2290 - Ditto - but 31/2 x 50/25 sm (19/7-w) Metre 2945.10 3166.88 3166.88

29-2291 - Ditto - but 31/2 x 70/35 sm (19/19-w) Metre 4132.79 4443.70 4443.70

29-2292 - Ditto - but 31/2 x 95/50 sm (19/19-w) Metre 5608.24 6030.12 6030.12

29-2293 - Ditto - but 31/2 x 120/70 sm (37/19-w) Metre 7086.07 7619.29 7619.29

29-2294 - Ditto - but 31/2 x 150/70 sm (37/19-w) Metre 8512.75 9153.24 9153.24

29-2295 - Ditto - but 31/2 x 185/95 sm (37/19-w) Metre 10599.62 11396.74 11396.74

29-2296 - Ditto - but 31/2 x 240/120 sm (37/19-w) Metre 13724.35 14756.73 14756.73

558
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2297 - Ditto - but 31/2 x 300/150 sm (61/19-w) Metre 17082.11 18366.60 18366.60

559
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC sheathed VDE 0271/3.69, BDS 901 / 79 Rated Voltage
600/1000 volts.

NYY /
29-2298 4 x 1.5 re (1-w) Metre 160.97 172.87 172.87
N2XY

29-2299 - Ditto - but 4 x 1.5 rm (7-w) Metre 163.98 175.64 175.64

29-2300 - Ditto - but 4 x 2.5 re (1-w) Metre 233.73 251.63 251.63

29-2301 - Ditto - but 4 x 2.5 rm (7-w) Metre 244.33 262.84 262.84

29-2302 - Ditto - but 4x 4 rm (7-w) Metre 391.92 378.50 378.50

29-2303 - Ditto - but 4x 6 rm (7-w) Metre 500.42 538.22 538.22

29-2304 - Ditto - but 4 x 10 rm (7-w) Metre 771.65 830.00 830.00

29-2305 - Ditto - but 4 x 16 rm (7-w) Metre 1180.00 1268.71 1268.71

29-2306 - Ditto - but 4 x 16 rm (19-w) Metre 0.00 1277.78 1277.78

29-2307 - Ditto - but 4 x 25 rm (7-w) Metre 1820.44 1957.38 1957.38

29-2308 - Ditto - but 4 x 25 rm (19-w) Metre 0.00 1959.02 1959.02

29-2309 - Ditto - but 4 x 35 sm (20-w) Metre 2370.16 2548.73 2548.73

29-2310 - Ditto - but 4 x 50 sm (20-w) Metre 3337.50 3589.02 3589.02

29-2311 - Ditto - but 4 x 70 sm (20-w) Metre 4626.10 4974.54 4974.54

29-2312 - Ditto - but 4 x 95 sm (20-w) Metre 6254.00 6725.24 6725.24

29-2313 - Ditto - but 4 x 120 sm (39-w) Metre 7793.32 8380.32 8380.32

29-2314 - Ditto - but 4 x 150 sm (39-w) Metre 9736.63 10470.00 10470.00

29-2315 - Ditto - but 4 x 185 sm (39-w) Metre 11968.46 12870.37 12870.37

29-2316 - Ditto - but 4 x 240 sm (39-w) Metre 15068.00 16787.30 16787.30

29-2317 - Ditto - but 4 x 300 sm (39-w) Metre 20800.00 21085.86 21085.86

560
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated flat steel wire armouring helical steel taping and PVC outer
sheathe VDE 0271/3.69, BDS 901 / 85 Rated Voltage 5800/10000 volts.

29-2318 NYSEYFGb 3 x 16 rm Metre 2690.28 2685.39 2685.39

y/
2XSEYFGb
29-2319 Y (HT) 3 x 25 rm Metre 3326.49 3576.55 3576.55

29-2320 - Ditto - but 3 x 35 sm Metre 3963.76 3963.42 3963.42

29-2321 - Ditto - but 3 x 50 sm Metre 4806.04 5167.54 5167.54

29-2322 - Ditto - but 3 x 70 sm Metre 6109.31 6568.87 6568.87

29-2323 - Ditto - but 3 x 95 sm Metre 7587.69 8158.52 8158.52

29-2324 - Ditto - but 3 x 120 sm Metre 9080.49 9763.61 9763.61

29-2325 - Ditto - but 3 x 150 sm Metre 10834.26 11649.19 11649.19

29-2326 - Ditto - but 3 x 185 sm Metre 12854.62 13821.66 13821.66

29-2327 - Ditto - but 3 x 240 sm Metre 0.00 17108.53 17108.53

Cable PVC insulated and PVC Non - sheathed BS : 900 / 79 BDS : 900 / 79Rated
Voltage 450 / 750 volts.

29-2328 BYA 1x 1 re (1-w) Metre 14.37 14.82 -

29-2329 - Ditto - but 1 x 1.5 re (1-w) Metre 22.53 -

20.96

29-2330 - Ditto - but 1 x 1.5 rm (7-w) Metre 21.46 22.53 -

29-2331 - Ditto - but 1 x 2.5 re (1-w) Metre 34.23 35.53 -

29-2332 - Ditto - but 1 x 2.5 rm (7-w) Metre 34.66 35.55 -

29-2333 - Ditto - but 1x 4 rm (7-w) Metre 54.64 58.53 -

29-2334 - Ditto - but 1x 6 rm (7-w) Metre 82.04 83.27 -

29-2335 - Ditto - but 1 x 10 rm (7-w) Metre 135.09 137.08 -

29-2336 - Ditto - but 1 x 16 rm (7-w) Metre 214.60 221.94 -

29-2337 - Ditto - but 1 x 16 rm (19-w) Metre 215.44 222.76 -

561
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2338 - Ditto - but 1 x 25 rm (7-w) Metre 392.00 421.12 -

29-2339 - Ditto - but 1 x 25 rm (19-w) Metre 394.63 424.37 -

562
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC Non - sheathed BS : 900/79 BDS : 900/79 Rated Voltage
450/750 volts.

29-2340 - Ditto - but 1 x 35 rm (19-w) Metre 541.66 582.53 -

29-2341 - Ditto - but 1 x 50 rm (19-w) Metre 772.85 793.15 -

29-2342 - Ditto - but 1 x 70 rm (19-w) Metre 1080.14 1161.67 -

29-2343 - Ditto - but 1 x 95 rm (19-w) Metre 1454.74 1564.21 -

29-2344 - Ditto - but 1 x 120 rm (37-w) Metre 1831.36 1969.21 -

29-2345 - Ditto - but 1 x 150 rm (37-w) Metre 2290.13 2462.44 -

29-2346 - Ditto - but 1 x 185 rm (37-w) Metre 2822.78 3035.26 -

29-2347 - Ditto - but 1 x 240 rm (61-w) Metre 3850.00 3951.72 -

29-2348 - Ditto - but 1 x 300 rm (61-w) Metre 4850.00 4917.22 -

29-2349 - Ditto - but 1 x 400 rm (61-w) Metre 6473.00 6557.44 -

29-2350 - Ditto - but 1 x 500 rm (61-w) Metre 0.00 8182.80 -

Cable PVC insulated and PVC sheathed Flat Twin core BS : 6004/84 BDS 900/79 Rated
Voltage 300/500 volts.

29-2351 BYFY 2x 1 re (1-w) Metre 36.57 37.99 -

29-2352 - Ditto - but 2 x 1.5 re (1-w) Metre 52.34 53.32 -

29-2353 - Ditto - but 2 x 2.5 re (1-w) Metre 83.63 86.66 -

29-2354 - Ditto - but 2x 4 rm (7-w) Metre 128.57 133.21 -

29-2355 - Ditto - but 2x 6 rm (7-w) Metre 186.77 193.53 -

29-2356 - Ditto - but 2 x 10 rm (7-w) Metre 0.00 317.24 -

29-2357 - Ditto - but 2 x 16 rm (7-w) Metre 0.00 488.34 -

29-2358 - Ditto - but 3 x 1.5 re (1-w) Metre 0.00 80.69 -

563
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

29-2359 - Ditto - but 3 x 2.5 re (1-w) Metre 0.00 126.80 -

564
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC sheathed Flat Twin core with ECC BS : 6004/84 BDS
900/79 Rated Voltage 300/500 volts.

29-2360 BYFYE 2x 1 re (1-w) Metre 0.00 58.36 -

29-2361 - Ditto - but 2 x 1.5 re (1-w) Metre 0.00 76.70 -

29-2362 - Ditto - but 2 x 2.5 re (1-w) Metre 0.00 119.14 -

29-2363 - Ditto - but 2x 4 rm (7-w) Metre 0.00 176.69 -

29-2364 - Ditto - but 2x 6 rm (7-w) Metre 0.00 264.88 -

Cable PVC insulated and PVC Non - sheathed BS : 6004 : 1995 & BDS 900/79Rated
Voltage 450/750 volts.

BYA / FR /
29-2365 1 x 1.5 re (1-w) Metre 22.04 22.04 -
FRLS

29-2366 - Ditto - but 1 x 1.5 rm (7-w) Metre 22.53 22.53 -

29-2367 - Ditto - but 1 x 2.5 re (1-w) Metre 36.02 36.02 -

29-2368 - Ditto - but 1 x 2.5 rm (7-w) Metre 36.60 36.60 -

29-2369 - Ditto - but 1x 4 rm (7-w) Metre 57.12 57.12 -

29-2370 - Ditto - but 1x 6 rm (7-w) Metre 85.69 85.69 -

29-2371 - Ditto - but 1 x 10 rm (7-w) Metre 141.07 141.07 -

29-2372 - Ditto - but 1 x 16 rm (7-w) Metre 223.43 223.43 -

29-2373 - Ditto - but 1 x 25 rm (7-w) Metre 0.00 423.74 -

29-2374 - Ditto - but 1 x 35 rm (19-w) Metre 0.00 585.60 -

29-2375 - Ditto - but 1 x 70 rm (19-w) Metre 0.00 1166.62 -

565
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC sheathed Single / Multi cores (Circular) BS : 6004 / 84,
BDS 900 / 79 Rated Voltage 300/500 volts.

29-2376 BYM 1x 1 re (1-w) Metre 0.00 19.23 -

29-2377 - Ditto - but 1 x 1.5 re (1-w) Metre 26.39 27.40 -

29-2378 - Ditto - but 1 x 1.5 rm (7-w) Metre 27.08 28.10 -

29-2379 - Ditto - but 1 x 2.5 re (1-w) Metre 40.81 42.45 -

29-2380 - Ditto - but 1 x 2.5 rm (7-w) Metre 41.76 43.29 -

29-2381 - Ditto - but 1x 4 rm (7-w) Metre 63.75 65.95 -

29-2382 - Ditto - but 1x 6 rm (7-w) Metre 92.64 95.96 -

29-2383 - Ditto - but 1 x 10 rm (7-w) Metre 150.15 155.49 -

29-2384 - Ditto - but 1 x 16 rm (7-w) Metre 236.59 244.88 -

29-2385 - Ditto - but 1 x 16 rm (19-w) Metre 0.00 246.94 -

29-2386 - Ditto - but 1 x 25 rm (7-w) Metre 0.00 446.51 -

29-2387 - Ditto - but 1 x 25 rm (19-w) Metre 0.00 448.40 -

29-2388 - Ditto - but 1 x 35 rm (19-w) Metre 0.00 613.39 -

29-2389 - Ditto - but 1 x 50 rm (19-w) Metre 0.00 872.48 -

29-2390 - Ditto - but 1 x 70 rm (19-w) Metre 0.00 1209.59 -

29-2391 - Ditto - but 1 x 95 rm (19-w) Metre 0.00 1614.77 -

29-2392 BYM 2x 1 re (1-w) Metre 57.96 62.34 -

29-2393 - Ditto - but 2 x 1.5 re (1-w) Metre 78.97 84.78 -

29-2394 - Ditto - but 2 x 1.5 rm (7-w) Metre 0.00 88.99 -

29-2395 - Ditto - but 2 x 2.5 re (1-w) Metre 117.23 126.48 -

29-2396 - Ditto - but 2 x 2.5 rm (7-w) Metre 0.00 130.93 -

566
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

29-2397 - Ditto - but 2x 4 rm (7-w) Metre 165.33 189.08 -

567
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated and PVC sheathed Single / Multi cores (Circular) BS : 6004 / 84,
BDS 900 / 79 Rated Voltage 300/500 volts.

29-2398 BYM 2x 6 rm (7-w) Metre 246.61 246.94 -

29-2399 - Ditto - but 2 x 10 rm (7-w) Metre 402.37 433.04 -

29-2400 - Ditto - but 2 x 16 rm (7-w) Metre 605.79 651.65 -

29-2401 - Ditto - but 2 x 25 rm (7-w) Metre 941.81 1013.09 -

29-2402 - Ditto - but 2 x 35 rm (19-w) Metre 1275.13 1370.99 -

29-2403 BYM 3x 1 re (1-w) Metre 79.00 80.08 -

29-2404 - Ditto - but 3 x 1.5 re (1-w) Metre 104.51 112.23 -

29-2405 - Ditto - but 3 x 1.5 rm (7-w) Metre 0.00 117.22 -

29-2406 - Ditto - but 3 x 2.5 re (1-w) Metre 160.06 171.95 -

29-2407 - Ditto - but 3 x 2.5 rm (7-w) Metre 173.20 186.31 -
29-2408 - Ditto - but 3x 4 rm (7-w) Metre 249.73 268.44 -
29-2409 - Ditto - but 3x 6 rm (7-w) Metre 355.10 382.01 -

29-2410 - Ditto - but 3 x 10 rm (7-w) Metre 564.23 606.69 -

29-2411 - Ditto - but 3 x 16 rm (7-w) Metre 868.14 933.51 -

29-2412 - Ditto - but 3 x 25 rm (7-w) Metre 1344.61 1446.35 -

29-2413 - Ditto - but 3 x 35 rm 20-w) Metre 1800.00 1877.82 -

29-2414 BYM 4x 1 re (1-w) Metre 96.67 104.02 -

29-2415 - Ditto - but 4 x 1.5 re (1-w) Metre 133.03 143.26 -

29-2416 - Ditto - but 4 x 1.5 rm (7-w) Metre 0.00 147.58 -

29-2417 - Ditto - but 4 x 2.5 re (1-w) Metre 204.21 219.67 -

29-2418 - Ditto - but 4 x 2.5 rm (7-w) Metre 0.00 225.89 -

29-2419 - Ditto - but 4x 4 rm (7-w) Metre 315.77 339.75 -

29-2420 - Ditto - but 4x 6 rm (7-w) Metre 456.86 491.27 -

29-2421 - Ditto - but 4 x 10 rm (7-w) Metre 730.12 785.20 -

29-2422 - Ditto - but 4 x 16 rm (7-w) Metre 1131.00 1216.45 -

29-2423 - Ditto - but 4 x 25 rm (7-w) Metre 1762.25 1894.96 -

568
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2424 - Ditto - but 4 x 25 rm (19-w) Metre 0.00 1904.47 -

29-2425 - Ditto - but 4 x 35 sm 20-w) Metre 2409.00 2506.00 -

569
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Cable PVC insulated Flexible single / multi core (Circular) BS : 6004 / 1961, BDS 809 /
79 Rated Voltage 250/440 volts.

29-2426 F/T 2x14 x 0.19 mm (14/.0076)Metre - 18.86 -

29-2427 - Ditto - but 2x23 x 0.19 mm (23/.0076)Metre - 26.87 -

29-2428 T/T 2x14 x 0.19 mm (14/.0076)Metre - 13.94 -

29-2428A - Ditto - but 2x23 x 0.19 mm (23/.0076)Metre - 21.57

29-2429 Single Core 14 x 0.193 mm (14/.0076)Metre - 6.95 -

29-2430 - Ditto - but 23 x 0.193 mm (23/.0076)Metre - 10.54 -

29-2431 - Ditto - but 40 x 0.193 mm (40/.0076)Metre - 17.62 -

29-2432 - Ditto - but 70 x 0.193 mm (70/.0076)Metre - 30.00 -

29-2433 - Ditto - but 110 x 0.193 mm (110/.0076)Metre - 46.85 -

PVC insulated Flexible Cable round (Circular) BDS 899/79 BS : 6500/89 Rated Voltage
300/500 volts.

29-2434 Two Core 14 x 0.193 mm (14/.0076)Metre - 23.46 -

29-2435 - Ditto - but 23 x 0.193 mm (23/.0076)Metre - 34.02 -

29-2436 - Ditto - but 40 x 0.193 mm (40/.0076)Metre - 52.01 -

29-2437 - Ditto - but 70 x 0.193 mm (70/.0076)Metre - 83.74 -

29-2438 - Ditto - but 110 x 0.193 mm (110/.0076)Metre - 124.94 -

29-2439 Three Core 14 x 0.193 mm (14/.0076)Metre - 31.30 -

29-2440 - Ditto - but 23 x 0.193 mm (23/.0076)Metre - 44.23 -

29-2441 - Ditto - but 40 x 0.193 mm (40/.0076)Metre - 68.64 -

29-2442 - Ditto - but 70 x 0.193 mm (70/.0076)Metre - 117.77 -

29-2443 - Ditto - but 110 x 0.193 mm (110/.0076)Metre - 175.33 -

29-2444 Four Core 14 x 0.193 mm (14/.0076)Metre - 39.14 -

29-2445 - Ditto - but 23 x 0.193 mm (23/.0076)Metre - 56.52 -

29-2446 - Ditto - but 40 x 0.193 mm (40/.0076)Metre - 91.21 -

29-2447 - Ditto - but 70 x 0.193 mm (70/.0076)Metre - 153.03 -

570
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2448 - Ditto - but 110 x 0.193 mm (110/.0076)Metre - 228.30 -

571
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

Plain annealed copper conductor PVC insulated and twisted (600/1000 volts)

29-2449 Druplex 2.5 re / 2.5 rm Metre - 93.90 -

29-2450 - Ditto - but 4 rm / 4 re Metre - 147.39 -

29-2451 - Ditto - but 4 rm / 6 re Metre - 180.43 -

29-2452 - Ditto - but 6 rm / 6 re Metre - 217.26 -

29-2453 - Ditto - but 10 rm / 10 re Metre - 358.64 -

29-2454 - Ditto - but 16 rm / 16 re Metre - 566.19 -

29-2455 - Ditto - but 25 rm / 25 re Metre - 881.04 -

29-2456 Quadruplex 3x 4 rm / 4 re Metre - 295.86 -

29-2457 - Ditto - but 3x 6 rm / 6 re Metre - 437.49 -

29-2458 - Ditto - but 3x 10 rm / 10 re Metre - 716.54 -

29-2459 - Ditto - but 3x 16 rm / 16 re Metre - 1135.14 -

29-2460 - Ditto - but 3x 25 rm / 25 re Metre - 1761.84 -

Aluminium conductor XLPE insulated PVC sheathed, 600/1000 volts as per BS 5467:
1989, IEC: 60502-1-1998, IS: 7098 (P-1)-1988, BDS: 1521 (P-1) Code A2xY

29-2461 AL/XLPE (1-

1x 1.5 re (1-W) Metre - - 13.65
C)

29-2462 - Ditto - but 1x 1.5 rm (7-W) Metre - - 15.91

29-2463 - Ditto - but 1x 2.5 re (1-W) Metre - - 18.08

29-2464 - Ditto - but 1x 2.5 rm (7-W) Metre - - 19.30

29-2465 - Ditto - but 1x 4 rm (7-W) Metre - - 28.45

29-2466 - Ditto - but 1x 6 rm (7-W) Metre - - 43.04

29-2467 - Ditto - but 1x 10 rm (7-W) Metre - - 65.52

29-2468 - Ditto - but 1x 16 rm (7-W) Metre - - 97.44

29-2469 - Ditto - but 1x 16 rm (19-W) Metre - - 103.70

29-2470 - Ditto - but 1x 25 rm (7-W) Metre - - 148.69

29-2471 - Ditto - but 1x 25 rm (19-W) Metre 182.23

29-2472 - Ditto - but 1x 35 rm (19-W) Metre - - 208.79

572
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2473 - Ditto - but 1x 50 rm (19-W) Metre - - 225.56

573
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
AL/XLPE (1-
29-2474 1x 70 rm (19-W) Metre - - 302.41
C)

29-2475 - Ditto - but 1x 95 rm (19-W) Metre - - 394.65

29-2476 - Ditto - but 1x 120 rm (37-W) Metre - - 486.88

29-2477 - Ditto - but 1x 150 rm (37-W) Metre - - 609.86

29-2478 - Ditto - but 1x 185 rm (37-W) Metre - - 745.48

29-2479 - Ditto - but 1x 240 rm (61-W) Metre - - 956.44

29-2480 - Ditto - but 1x 300 rm (61-W) Metre - - 1187.04

29-2481 - Ditto - but 1x 400 rm (61-W) Metre - - 1558.77

29-2482 - Ditto - but 1x 500 rm (61-W) Metre - - 1922.12

29-2483 - Ditto - but 1x 630 rm (61-W) Metre - - 2433.61

29-2484 - Ditto - but 1x 800 rm (61-W) Metre - - 3077.85

29-2485 - Ditto - but 1x 1000 rm (61-W) Metre - - 3819.93

29-2486 AL/XLPE (2-

2x 1.5 re (1-W) Metre - - 0.00
C)

29-2487 - Ditto - but 2x 1.5 rm (7-W) Metre - - 0.00

29-2488 - Ditto - but 2x 2.5 re (1-W) Metre - - 62.35

29-2489 - Ditto - but 2x 2.5 rm (7-W) Metre - - 0.00

29-2490 - Ditto - but 2x 4 rm (7-W) Metre - - 87.20

29-2491 - Ditto - but 2x 6 rm (7-W) Metre - - 123.53

29-2492 - Ditto - but 2x 10 rm (7-W) Metre - - 171.05

29-2493 - Ditto - but 2x 16 rm (7-W) Metre - - 245.12

29-2494 - Ditto - but 2x 16 rm (19-W) Metre - - 256.30

29-2495 - Ditto - but 2x 25 rm (7-W) Metre - - 375.08

29-2496 - Ditto - but 2x 25 rm (19-W) Metre - - 389.06

29-2497 - Ditto - but 2x 35 rm (19-W) Metre - - 584.71

29-2498 - Ditto - but 2x 50 rm (19-W) Metre - - 968.64

574
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2499 AL/XLPE (3-
3x 4 rm (7-W) Metre - - 109.56
C)

29-2500 - Ditto - but 3x 6 rm (7-W) Metre - - 157.00

29-2501 - Ditto - but 3x 10 rm (7-W) Metre - - 218.59

29-2502 - Ditto - but 3x 16 rm (7-W) Metre - - 326.18

29-2503 - Ditto - but 3x 25 rm (7-W) Metre - - 478.50

29-2504 - Ditto - but 3x 35 sm (20-W) Metre - - 829.20

29-2505 - Ditto - but 3x 50 sm (20-W) Metre - - 968.64

29-2506 - Ditto - but 3x 70 sm (20-W) Metre - - 1233.15

29-2507 - Ditto - but 3x 95 sm (20-W) Metre - - 1374.30

29-2508 - Ditto - but 3x 120 sm (39-W) Metre - - 2479.16

29-2509 - Ditto - but 3x 150 sm (39-W) Metre - - 2633.44

29-2510 - Ditto - but 3x 185 sm (39-W) Metre - - 3261.88

29-2511 - Ditto - but 3x 240 sm (39-W) Metre - - 3954.09

29-2512 - Ditto - but 3x 300 sm (61-W) Metre - - 4885.66

29-2513 - Ditto - but 3x 400 sm (61-W) Metre - - 6307.46

29-2514 - Ditto - but 3x 500 sm (61-W) Metre - - 7983.07

29-2515 - Ditto - but 3x 630 sm (61-W) Metre - - 9989.88

1
AL/XLPE (3 /2-
29-2516 31/2 x 16 /10 rm/rm Metre - - 326.18
C)

29-2517 - Ditto - but 31/2 x 25 /16 rm/rm Metre - - 948.06

29-2518 - Ditto - but 31/2 x 35 /16 sm/rm Metre - - 1012.34

29-2519 - Ditto - but 31/2 x 50 /25 sm/rm Metre - - 1227.56

29-2520 - Ditto - but 31/2 x 70 /35 sm/rm Metre - - 1681.75

29-2521 - Ditto - but 31/2 x 95 /50 sm/rm Metre - - 2344.17

29-2522 - Ditto - but 31/2 x 120 /70 sm/rm Metre - - 3242.75

29-2523 - Ditto - but 31/2 x 150 /70 sm/rm Metre - - 3804.55

29-2524 - Ditto - but 31/2 x 185 /95 sm/rm Metre - - 3934.52

29-2525 - Ditto - but 31/2 x 240 /120 sm/rm Metre - - 4749.26

29-2526 - Ditto - but 31/2 x 300 /150 sm/rm Metre - - 5738.69

575
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

29-2527 - Ditto - but 31/2 x 400 /185 sm/rm Metre - - 7499.94

29-2528 - Ditto - but 31/2 x 500 /240 sm/rm Metre - - 8673.44

576
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
AL/XLPE (4-
29-2529 4x 16 rm (7-W) Metre - - 437.98
C)

29-2530 - Ditto - but 4x 25 rm (7-W) Metre - - 682.53

29-2531 - Ditto - but 4x 35 sm (20-W) Metre - - 1112.96

29-2532 - Ditto - but 4x 50 sm (20-W) Metre - - 1377.10

29-2533 - Ditto - but 4x 70 sm (20-W) Metre - - 1944.48

29-2534 - Ditto - but 4x 95 sm (20-W) Metre - - 2488.10

29-2535 - Ditto - but 4x 120 sm (39-W) Metre - - 3017.76

29-2536 - Ditto - but 4x 150 sm (39-W) Metre - - 3643.84

29-2537 - Ditto - but 4x 185 sm (39-W) Metre - - 4350.98

29-2538 - Ditto - but 4x 240 sm (39-W) Metre - - 5449.41

29-2539 - Ditto - but 4x 300 sm (61-W) Metre - - 6732.32

29-2540 - Ditto - but 4x 400 sm (61-W) Metre - - 8500.15

29-2541 - Ditto - but 4x 500 sm (61-W) Metre - - 10013.65

Telephone house wiring Cables PVC / PE Insulated and PVC sheathed
29-2542 Tele cable 1 x Pair (Conductor 0.6mm)
Metre - 13.03 -

29-2543 - Ditto - but 2 x Pair Metre - 22.02 -

29-2544 - Ditto - but 3 x Pair Metre - 32.68 -

29-2545 - Ditto - but 4 x Pair Metre - 46.11 -

29-2546 - Ditto - but 5 x Pair Metre - 55.01 -

29-2547 - Ditto - but 6 x Pair Metre - 66.21 -

29-2548 - Ditto - but 7 x Pair Metre - 75.57 -

29-2549 - Ditto - but 8 x Pair Metre - 84.84 -

29-2550 - Ditto - but 10 x Pair Metre - 106.09 -

29-2551 - Ditto - but 15 x Pair Metre - 153.94 -

29-2552 - Ditto - but 20 x Pair Metre - 203.46 -

29-2553 - Ditto - but 25 x Pair Metre - 250.03 -

29-2554 - Ditto - but 30 x Pair Metre - 296.88 -

29-2555 - Ditto - but 40 x Pair Metre - 387.40 -

29-2556 - Ditto - but 50 x Pair Metre - 476.98 -

577
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE
29-2557 - Ditto - but 100 x Pair Metre - 922.62 -

578
RESTRICTED
 RESTRICTED
SECTION-29
PART - II
House Wiring & Power Cables
Description of Cables Retail Price in Tk
Schedule Remark
Unit Other than Eastern
s
Item Code Core Size Eastern
PVC XLPE

PVC insulated flat twin core Telephone DROP WIRE

29-2558 - Ditto - but 2 x 0.6 mm Metre - 10.94 -

29-2559 - Ditto - but 2 x 0.9 mm Metre - 21.64 -

29-2560 Dish Antena cable RG-6/6u. Co-axial foreign

made 2x0.9 mm Metre - 49.35 -

29-2561

To Blank
29-2600

579
RESTRICTED
 RESTRICTED
SECTION-29
ELECTRIFICATION
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3201 Wall light Crescent Cat No.CB-221-678 -3B Each 486.00

29-3202 Wall light Crescent Cat No.CB-331-678-4B Each 541.00

29-3203 Wall light Crescent Cat No.CB-331-684 Each 615.00

29-3204 Wall light Crescent Cat No.CB-332-684 Each 1,007.00

29-3205 Wall light Crescent Cat No.CB-337-551 Each 752.00

29-3206 Wall light Crescent Cat No.CB-373-H R CH Each 514.00

29-3207 Wall light Crescent Cat No.CB-373-NS D Each 232.00

29-3208 Wall light Crescent Cat No.CB-412-BL-T-12" D Each 1,208.00

29-3209 Wall light Crescent Cat No.CB-431-592 frosted) Each 742.00

29-3210 Wall light Crescent Cat No.CB-447-644 Each 806.00

29-3211 Wall light Crescent Cat No.CB-498-540-4B Each 589.00

29-3212 Wall light Crescent Cat No.CB-518 Crystal Each 6,890.00

29-3213 Wall light Crescent Cat No.CB-560-681-547 Each 769.00

29-3214 Wall light Crescent Cat No.CB-565- 970 Each 758.00

29-3215 Wall light Crescent Cat No.CB-577 (ii) - 662 Each 1,032.00

29-3216 Wall light Crescent Cat No.CB-577- 662 Each 520.00

29-3217 Wall light Crescent Cat No.CB-591-681-547 Each 1,663.00

29-3218 Wall light Crescent Cat No.CB-602-909 FF Each 838.00

29-3219 Wall light Crescent Cat No.CB-604-540-BF (4B) Each 1,219.00

29-3220 Wall light Crescent Cat No.CB-651-666 Each 754.00

29-3221 Wall light Crescent Cat No.CB-652-666 Each 1,366.00

586
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3222 Wall light Crescent Cat No.CB-675-642-A2 Each 1,579.00

29-3223 Wall light Crescent Cat No.CB-740 Each 700.00

587
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3224 Wall light Crescent Cat No.CB-792 (1)-972/DF Each 1,574.00

29-3225 Wall light Crescent Cat No.CB-892-(1)-972/D Each 1,315.00

29-3226 Wall light Crescent Cat No.CB-894-977 Each 1,458.00

29-3227 Wall light Crescent Cat No.CB-895-(1)-976-C/F Each 1,295.00

29-3228 Wall light Crescent Cat No.CB-897-694 Each 1,896.00

29-3229 Wall light Crescent Cat No.CB-899--977 F/C Each 1,574.00

29-3230 Wall light Crescent Cat No.CB-911-977 Each 1,267.00

29-3231 Wall light Crescent Cat No.CB-929-CPG-2 Each 657.00

29-3232 Wall light Crescent Cat No.CB-931(1)-684 Each 693.00

29-3233 Wall light Crescent Cat No.CB-952-CPG-02 Each 950.00

29-3234 Wall light Crescent Cat No.CB-981-CG- Crystal Each 2,538.00

29-3235 Wall light Crescent Cat No.CB-986-Crystal Each 5,077.00

29-3236 Wall light Crescent Cat No.CBB-4/12-T-12"DD Each 1,208.00

29-3237 Wall light Crescent Cat No.CFLD-3 Each 3,392.00

29-3238 Wall light Crescent Cat No.CG-22 Each 1,872.00

29-3239 Wall light Crescent Cat No.CG-80 Each 1,435.00

29-3240 Wall light Crescent Cat No.CG-92 Each 1,570.00

29-3241 Wall light Crescent Cat No.CGL-49 Each 2,548.00

29-3242 Wall light Crescent Cat No.CGL-52 Each 9,708.00

29-3243 Wall light Crescent Cat No.CGL-79 Each 10,650.00

29-3244 Wall light Crescent Cat No.CG-Umb-8 / CG-Mush 8 Each 2,468.00

588
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3245 Flood light Crescent Cat No.CMHLD-02 Each 13,975.00

29-3246 Ceiling light Crescent Cat No.CML -133 WITH PAR-38 Each 1,537.00
BULB-B

589
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3247 Ceiling light Crescent Cat No.CML -190-B-95 L-130 P-115- Each 700.00
T
29-3248 Ceiling light Crescent Cat No.CML-159(2) Each 1,261.00

29-3249 Ceiling light Crescent Cat No.CML-26 Each 1,381.00

29-3250 Ceiling light Crescent Cat No.CML-339 (Explosive proof) Each 5,353.00

29-3251 Ceiling light Crescent Cat No.CML-369 Each 513.00

29-3252 Ceiling light Crescent Cat No.CML-386 Each 726.00

29-3253 Ceiling light Crescent Cat No.CML-42 Each 1,881.00

29-3254 Ceiling light Crescent Cat No.CML-58 DIA-145 H-110 Each 1,027.00

29-3255 Ceiling light Crescent Cat No.CP-10 DS Each 562.00

29-3256 Ceiling light Crescent Cat No.CP-17 DD-Ring No.2 Each 2,041.00

29-3257 Ceiling light Crescent Cat No.CP-17 DGN PC WITHOUT Each 1,028.00
LNC
29-3258 Ceiling light Crescent Cat No.CP-19 DIA -215 H-95 Each 610.00

29-3259 Ceiling light Crescent Cat No.CP-22 D-155 H-85 Each 519.00

29-3260 Ceiling light Crescent Cat No.CP-25 GCF Each 572.00

29-3261 Ceiling light Crescent Cat No.CP-8 (R) D-210 H-85 Each 492.00

29-3262 Ceiling light Crescent Cat No.CP-8F-DIA-225 H-85 Each 473.00

29-3263 Ceiling light Crescent Cat No.CPC-34 Each 500.00

29-3264 Chandelier Crescent Cat No.CR-170 (21) CY DIA 122 Each 208,820.00

29-3265 Chandelier Crescent Cat No.CR-170 (8) CY DIA 465 Each 44,520.00

29-3266 Chandelier Crescent Cat No.CR-230(3)-919 AMBER Each 10,070.00

29-3267 Chandelier Crescent Cat No.CR-239 (7) -925 CLEAR Each 15,386.00
DGN

590
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3268 Chandelier Crescent Cat No.CR-244(9)-922/CY Each 21,682.00

29-3269 Chandelier Crescent Cat No.CR-310 (1) DGN CY Each 12,190.00

591
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3270 Chandelier Crescent Cat No.CR-367 (4) CY Each 19,080.00

29-3271 Chandelier Crescent Cat No.CR-386 (1) Each 6,415.00

29-3272 Lawn light Crescent Cat No.CST-1001 Each 1,600.00

29-3273 Lawn light Crescent Cat No.CST-1001(N) Each 1,693.00

29-3274 Lawn light Crescent Cat No.CST-1004 Each 1,990.00

29-3275 Lawn light Crescent Cat No.CST-1004(N) Each 2,657.00

29-3276 Wall Light Gloria Cat No. GBB-970-2127 FR Each 1,366.00

29-3277 Wall Light Gloria Cat No. GBB-979-2401 T Each 1,315.00

29-3278 Wall Light Crescent Cat No.CGL-10 Each 2,869.90

29-3279 Wall Light Gloria Cat No. GGL-154 Each 1,290.00

29-3280 Wall Light Crescent Cat No.CGL-48 Each 5,327.00

29-3281 Wall Light Crescent Cat No.CGL-49 Each 2,493.00

29-3282 Flood light Gloria Cat No. GFL-710 Each 1,643.00

29-3283 Flood light Gloria Cat No. GFL-711-705 Each 1,666.00

29-3284 Halogen light Gloria Cat No. GFL-(H)715 (500 watt) Each 3,800.00

29-3285 Halogen light Gloria Cat No. GFL-(H)709 (1000 watt) Each 6,450.00

29-3286 Lawn light Gloria Cat No. GGDL-255 Each 2,350.00

29-3287 Lawn light Gloria Cat No. GGDL-256 Each 1,850.00

29-3288 Lawn light Gloria Cat No. GBL-253 Each 5,380.00

29-3289 Light fixture Gloria Cat No. GCF-380 DIA-178 H-203 Each 592.00

29-3290 Light fixture Gloria Cat No. GCF-410-658 DIA-170 H- Each 503.00
170

592
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3291 Light fixture Gloria Cat No. GCF-605 DIA-201H-107 Each 710.00

29-3292 Light fixture Gloria Cat No. GCF-609(8) DIA-95 H-160 Each 310.00

593
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3293 Light fixture Gloria Cat No. GCF-610 DIA-223 H-92 Each 330.00

29-3294 Light fixture Gloria Cat No. GCF-611 DIA-223 H-92 Each 335.00

29-3295 Light fixture Gloria Cat No. GCF-3110 (9)-2260 Each 15,373.00

29-3296 Light fixture Gloria Cat No. GCF-3108 (3)-2151T Each 7,095.00

29-3297 Light fixture Gloria Cat No. GCF-3109 (3)-2415T Each 7,686.00

29-3298 Light fixture Crescent Cat No.CPM-45 D-425 H-230 Each 3,631.00
(WITH TUBE)
29-3299 Light fixture Gloria Cat No. GWB-1201-1884 CH Each 233.00

29-3300 Light fixture Gloria Cat No. GWB-1203-3604 B-130 H- Each 565.00
210 P-140
29-3301 Light fixture Gloria Cat No. GWB-1203-1804 B-72 H- Each 305.00
180 P-250
29-3302 Light fixture Gloria Cat No. GWB-1207-1809 Each 525.00

29-3303 Light fixture Gloria Cat No. GWB-1215-1816 Each 545.00

29-3304 Light fixture Gloria Cat No. GWB-1217-1877 BR Each 420.00

29-3305 Light fixture Gloria Cat No. GWB-1218-1807 DS/BR Each 680.00

29-3306 Light fixture Gloria Cat No. GWB-1201-1821-CR B-130 Each 230.00
H-170 P-240
29-3307 Light fixture Gloria Cat No. GWB-1333-1817 Each 630.00

29-3308 Light fixture Gloria Cat No. GWB-1348-1843 F-1828 Each 1,550.00

29-3309 Light fixture Gloria Cat No. GWB-1478-2298-Pata Each 2,506.00

29-3310 Light fixture Gloria Cat No. GWB-1501-2105 T Each 790.00

29-3311 Light fixture Gloria Cat No. GWB-1501-2297 FR Each 795.00

29-3312 Light fixture Gloria Cat No. GWB-1501-TV Glass Each 790.00

29-3313 Light fixture Gloria Cat No. GWB-1502-2101-Frosted Each 1,108.00

594
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3314 Light fixture Gloria Cat No. GWB-1521 Crystal Each 9,300.00

595
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3315 Light fixture Gloria Cat No. GWB-1595-2407 FR Each 709.00

29-3316 Light fixture Gloria Cat No. GWB-1607-2105 T Each 937.20

29-3317 Light fixture Gloria Cat No. GWB-1663-2253 BND B- Each 810.00
160 H-200 P-100
29-3318 Light fixture Gloria Cat No. GWB-1671-2255 T Each 570.00

29-3319 Light fixture Gloria Cat No. GWB-1741-2291 SR Each 1,510.00

29-3320 Light fixture Gloria Cat No. GWB-1753-2293 BND Each 1,299.00

29-3321 Light fixture Gloria Cat No. GWB-1754-2294 BND Each 1,650.00

29-3322 Light fixture Gloria Cat No. GWB-1776 Crystal Each 5,670.00

29-3323 Light fixture Gloria Cat No. GWB-1787 Each 715.00

29-3324 Light fixture Gloria Cat No. GWB-1793-2147 FR Each 1,150.00

29-3325 Light fixture Gloria Cat No. GWB-2543-1823 Each 860.00

29-3326 Light fixture Gloria Cat No. GWB-2592-1892 Each 920.00

29-3327 Light fixture Gloria Cat No. GWB-2628-1809 Each 870.00

29-3328 Light fixture Gloria Cat No. GWB-2629-1809 Each 535.00

29-3329 Light fixture Gloria Cat No. GWB-2672-1897 Each 850.00

29-3330 Light fixture Gloria Cat No. GWB-2683-1888 Each 665.00

29-3331 Light fixture Gloria Cat No. GWB-2684-1888 Each 1,160.00

29-3332 Light fixture Gloria Cat No. GWB-2689-651 NC Each 590.00

29-3333 Light fixture Gloria Cat No. GWB-2690-651 NC Each 880.00

29-3334 Light fixture Gloria Cat No. GWB-2731-1839 Each 475.00

29-3335 Light fixture Gloria Cat No. GBB-959-2105 T Each 710.00

596
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3336 Light fixture Gloria Cat No. GWT-706 Each 950.00

29-3337 Light fixture Gloria Cat No. GWT-708 Each 1,040.00

597
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3338 Light fixture Gloria Cat No. GWT-711-2106 (Brass net) Each 1,155.00

29-3339 Light fixture Gloria Cat No. SCDB-161-DT 732 Each 1,380.00

29-3340 Light fixture Gloria Cat No. GCF-463 D-130 L-120 H-70 Each 475.00

29-3341 Light fixture Gloria Cat No. GCF-623 SD/BR DIA P-218 Each 326.00
H-70
29-3342 Light fixture Gloria Cat No. GCF-630-DIA-313 H-126 Each 858.00

29-3343 Light fixture Gloria Cat No. GCF-1084(8)CRYSTAL Each 27,780.00

29-3344 Light fixture Gloria Cat No. GCF-1086(16) CRYSTAL Each 88,690.00

29-3345 Light fixture Gloria Cat No. GCF-378(B) DIA-152 E-114 Each 710.00

29-3346 Light fixture Gloria Cat No. GCF-607-DIA-292 H-110 Each 940.00

29-3347 Light fixture Gloria Cat No. GCF-609(B) DIA-95 H-160 Each 3,010.00

29-3348 Light fixture Gloria Cat No. GCF-623 DS/BR DIAT-218 Each 295.00
H-70
29-3349 Light fixture Gloria Cat No. GCF-624 DIA-215 H-70 Each 278.00

29-3350 Light fixture Gloria Cat No. GCF-627 Each 355.00

29-3351 Light fixture Gloria Cat No. GEPL-714-DIA-210 H-318 P- Each 3,133.00
305
29-3352 Light fixture Gloria Cat No. GSL-364 DIA-110 L-150 P- Each 443.00
158
29-3353 Light fixture Gloria Cat No. GSL-396 DIA-95 L-150 P- Each 828.00
143
29-3354 Light fixture Gloria Cat No. GSL-397(2) DIA-100 L-155 Each 850.00
P-155 BASE L-220 B-165
29-3355 Light fixture Gloria Cat No. GBB 961-2127 FR L-305 B- Each 880.00
105 P-750

29-3356 Light fixture Gloria Cat No. GWB-1201-1821-CR Each 207.00

29-3357 Light fixture Gloria Cat No. GWB-1217-1807-DS/BR Each 405.00

29-3358 Light fixture Gloria Cat No. GWB-1298-1839 B-260- H- Each 798.00
179 P-125
29-3359 Light fixture Gloria Cat No. GWB-1299-1839 B-106 H- Each 474.00
174 P-128

598
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3360 Light fixture Gloria Cat No. GWB-1334-1817 Each 946.00

29-3361 Light fixture Gloria Cat No. GWB-1347-658 Each 887.00

29-3362 Light fixture Gloria Cat No. GWB-1475-2129 FR (B) B- Each 2,330.00
258 H-265 P-212
29-3363 Light fixture Gloria Cat No. GWB-1476-2129 B-90 H- Each 1,160.00
265 P-300

29-3364 Light fixture Gloria Cat No. GWB-1587- Each 2,720.00

2148(B)CRYSTAL B -150 H-
220 P-225
29-3365 Light fixture Gloria Cat No. GWB-1588-2148 CRYSTAL Each 4,960.00
B-370 H-225 P-240

29-3366 Light fixture Gloria Cat No. GWB-1661-2250 BND B- Each 860.00
124 H-205 P-110

29-3367 Light fixture Gloria Cat No. GWB-1662-2250 BND Each 1,650.00

29-3368 Light fixture Gloria Cat No. GWB-1665-2251 BND B- Each 1,235.00
225 H-215 P-150
29-3369 Light fixture Gloria Cat No. GWB-1667-2256 BND Each 1,105.00

29-3370 Light fixture Gloria Cat No. GWT-701 Alu cast BODY L- Each 290.00
166-B-125 H-105
29-3371 Light fixture Gloria Cat No. GBB-953-1803 D.cut Each 710.00

29-3372 Light fixture Gloria Cat No. GBB-958-1205T Each 532.00

29-3373 Light fixture Gloria Cat No. GBB-960-2106T L-405 B- Each 690.00
130 P-90
29-3374 Light fixture Swash Cat No. BFWT-6 SMALL D-230 L- Each 690.00
281
29-3375 Light fixture Swash Cat No. BFWT-1 B-170 H-108 Each 1,045.00

29-3376 Light fixture Swash Cat No. BFWT-6(BIG) B-308 L-385 Each 1,150.00

29-3377 Light fixture Swash Cat No. BFWT-4 PARSPEX B-119 H- Each 575.00
235 P-110
29-3378 Light fixture Swash Cat No. SCB-33 (12")PL-B-72- L-368 Each 595.00
P-110

599
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3379 Light fixture Swash Cat No. SCB-35 TTG 12" B-115 L- Each 920.00
410 P-112

600
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3380 Light fixture Swash Cat No. SCB-35 TTG-6"-L-255 B-105 Each 580.00
P-92

29-3381 Light fixture Swash Cat No. SCB-37 TTG B-120 L-318 P- Each 1,260.00
91
29-3382 Light fixture Swash Cat No. SCCF -28 DESIGN GLASS Each 399.00
DIA-222 H-97

29-3383 Light fixture Swash Cat No. SCCF-22 DIA-222 H-91 Each 405.00

29-3384 Light fixture Swash Cat No. SCCF-30 PLAN STK DIA- Each 533.00
145 H-96
29-3385 Light fixture Swash Cat No. SCCF-35 DIA-157 H-173 Each 380.00

29-3386 Light fixture Swash Cat No. SCCF-8 SIDE CUT DIA-225 Each 325.00
H-82
29-3387 Light fixture Swash Cat No. SCCSL-6 (B)BRASS DIA- Each 845.00
150 H-153
29-3388 Light fixture Swash Cat No. SCDB-155 CRYSTAL B-287 Each 4,516.00
H-219 P-166

29-3389 Light fixture Swash Cat No. SCDB-156 CRYSTAL B - Each 11,200.00
369 H-224- P-238

29-3390 Light fixture Swash Cat No. SCD-337 (S) AG B-259 H- Each 960.00
173 P-124

29-3391 Light fixture Swash Cat No. SCDB-388 CRYSTAL B-455 Each 6,395.00
H-278 P-165
29-3392 Light fixture Swash Cat No. SCDB-447(F) Pata B-265 H- 1,220.00
318 P-173

29-3393 Light fixture Swash Cat No. SCH-183 (8) CRYSTAL DIA- Each 30,977.00
460
29-3394 Light fixture Swash Cat No. SCCF-4/84 I-BRASS Each 578.00
Net/Glass DIA-199 H-77
29-3395 Light fixture Swash Cat No. SCPF-7 B-200 P-79 Each 586.00

29-3396 Light fixture Swash Cat No. SCSB-201 TINTED B -150 H- Each 595.00
199 P-98
29-3397 Light fixture Swash Cat No. SCSB-202 BEND GLASS B- Each 750.00
160 H-205 P-101
29-3398 Light fixture Swash Cat No. SCSB-337 (S) AGB -105 H- Each 490.00
172 P-126

601
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3399 Light fixture Swash Cat No. SCS-423 Each 724.00

29-3400 Light fixture Swash Cat No. SCS-426 STEET B-302 H- Each 1,098.00
320 P-78

602
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3401 Light fixture Swash Cat No. SCSB-428 BEND GLASS B- Each 752.00
115 H-203 P-98
29-3402 Light fixture Swash Cat No. SCSB-447 F. Pata Each 562.00

29-3403 Light fixture Swash Cat No. SCS-76 HR.BR B-133 H- Each 248.00
130 P-213
29-3404 Light fixture Swash Cat No. SCCSL-2 DIA 179 H-199 Each 706.00
(CONCEALED)
29-3405 Light fixture Swash Cat No. SCSL-20(B) B-85 H-225 P- Each 460.00
140
29-3406 Light fixture Swash Cat No. SCSL-21 B-107 H-281 P- Each 530.00
165
29-3407 Light fixture Swash Cat No. SCSL-29 (2) B-199 H-184 P- Each 960.00
147
29-3408 Light fixture Swash Cat No. SCSL-9 REFLECTOR B-101 Each 768.00
H-170 P-212
29-3409 Light fixture Swash Cat No. SCCF TFR-I/84 DESIGN Each 2,398.00
DIA 350 H-127
29-3410 Tube light Crescent Cat No.CTLS -96x4x20 watt Each 4,115.00

29-3411 Tube light Crescent Cat No.CTLS-11x1x40 watt (design) Each 1,388.00

29-3412 Tube light Crescent Cat No.CTLS-1x1x40 watt Each 1,237.00

29-3413 Tube light Crescent Cat No.CTLS-4x2x40 watt (design) Each 2,926.00

29-3414 Tube light Crescent Cat No.CTLS-68x2x40 watt Each 2,107.00

29-3415 Tube light Crescent Cat No.CTLS-11x1x10 watt (design) Each 1,075.00

29-3416 Tube light Crescent Cat No.CTLS-11x1x20 watt (DGN) Each 1,128.00

29-3417 Tube light Crescent Cat No.CTLS-22x4x20 watt Each 4,090.00

29-3418 Tube light Crescent Cat No.CTLS-31x4x20 watt Each 4,025.00

29-3419 Tube light Crescent Cat No.CTLS-160x2x40 watt Each 3,921.00

29-3420 Tube light Crescent Cat No.CTLS-160x1x40 watt Each 3,288.00

29-3421 Tube light Crescent Cat No.CTLS-94x1x40 watt Each 1,657.00

603
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3422 Tube light Gloria Cat No. GTF-753x1x20 watt Each 828.00

29-3423 Tube light Gloria Cat No. GTF-753x1x40 watt Each 920.00

604
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3424 Tube light Gloria Cat No. GTF-755x1x40 watt design Each 1,295.00

29-3425 Tube light Gloria Cat No. GTF-757x1x40 watt design Each 1,519.00

29-3426 Tube light Gloria Cat No. GTF-771x4x20 watt Each 3,644.00

29-3427 Tube light Gloria Cat No. GTF-789x2x40 watt Each 1,312.00

29-3428 Tube light Gloria Cat No. GTF-756x2x40 WATT Each 2,110.00

29-3429 Tube light Gloria Cat No. GTF-793x4x20 WATT-635 B- Each 3,642.00
635-H-128
29-3430 Tube light Gloria Cat No. GTF-764x2x40 watt Each 3,195.00
(W/Base Reflectoe)
29-3431 Tube light Gloria Cat No. GTF-783x2x40 watt Each 2,234.00

29-3432 Tube light Gloria Cat No. GTF-812x2x40 watt Each 3,074.00

29-3433 Tube light Gloria Cat No. GTF-815x1x20 watt Each 1,214.00

29-3434 Tube light Gloria Cat No. GTF-815x4x20 watt Each 4,966.00

29-3435 Tube light Gloria Cat No. GTF-863x1x40 watt Each 1,525.00

29-3436 Tube light Gloria Cat No. GCF-801x1x36 wall (with Each 1,892.00
tube)
29-3437 Tube light Gloria Cat No. GCF-883x1x32 wall (with Each 2,211.00
tube)
29-3438 Tube light Gloria Cat No. GBB-802x1x20 watt Each 2,602.00
(Swinging) Brass

29-3439 Tube light Swash Cat No. SCTF-11/78x1x20 watt Each 807.00

29-3440 Tube light Swash Cat No. SCTF-11x178x1x40 watt Each 1,045.00

29-3441 Tube light Swash Cat No. SCTF-14/79x1x20 watt Each 860.00

29-3442 Tube light Swash Cat No. SCTF-24/85x2x40 watt Each 3,920.00

29-3443 Tube light Swash Cat No. SCTF-33x4x20 watt Each 3,005.00

29-3444 Tube light Swash Cat No. SCTF-34x1x20 watt Each 1,179.00
DESIGN

605
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3445 Tube light Swash Cat No. SCTF-37x2x40 watt Each 2,220.00
DESIGN
29-3446 Tube light Swash Cat No. SCTF-8/78x2x40 watt Each 1,818.00
LOVER

606
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3447 Tube light China / Taiwan "CATA- Model" 1x40 watt Each 500.00
with tube
29-3448 Tube light China / Taiwan "CATA- Model" 2x40 watt Each 850.00
with tube
29-3449 Tube light MEP "Model B-224 1x40 watt with Each 260.00
tube
29-3450 Fixture for Ordinary Street light (double) 1200 Each 1,320.00
mm without fittings
29-3451 Fixture for Ordinary Street light (single) 1200 mm Each 935.00
without fittings
29-3452 Fixture for Crescent Cat No.CTLE 25x2x20 watt Each 1,710.00

29-3453 Fixture for Crescent Cat No.CTLS-28x1x20 watt Each 1,150.00

29-3454 Street light Crescent Cat No. CTLS 25x2x40 watt / GTF Each 2,520.00
768x2x40
29-3455 Street light Crescent Cat No. CTLS 28x1x40 watt GTF- Each 1,660.00
765x1x40 watt
29-3456 Sodium light Crescent Cat No. CSL-1001 watt (N) Each 13,942.00

29-3457 Street light fixture with sodium lamp 90 watt GSLF-797 Each 12,888.00

29-3458 Street light fixture with sodium lamp 250 watt HP (Philips) Each 14,080.00

29-3459 Metal Halide lamp fixture Complete 400 watt (Italy) Each 8,870.00

29-3460 Tube Light reflector (Ordinary) 1220mm 40 Watt Each 275.00

29-3461 Tube Light reflector (Ordinary) 610mm 20 Watt Each 198.00

29-3462 Bracket exterior watertight complete 12 mm Each 177.10

29-3463 Fancy type bath bracket for double lamp Each 308.00

29-3464 Fancy type bath bracket for single lamp Each 242.00

29-3465 Fancy type brass bracket wall double arm Each 407.00

29-3466 Fancy type brass bracket wall single arm Each 310.00

29-3467 Flame proof fittings Bulkhead type Each 778.00

607
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3468 Flame proof fittings for 100 watt lamp Each 1,650.00

29-3469 Flame proof fittings for 60 watt lamp Each 1,320.00

608
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3470 Swan neck brass bracket complete Each 165.00

29-3471 Swan neck brass bracket complete Each 83.00

29-3472 Flame Proof fittings Each 1,028.00

29-3473 Flame Proof Gland Each 188.00

29-3474 Flame Proof Fittings 20 mm E T Tapped Each 1,155.00

29-3475 Flame Proof Fittings 20 mm Tapped Height 325 mm Each 1,320.00

29-3476 Bracket wall plain without holder & shade Each 73.00

29-3477 Sodium Light complete fixture High Pressure 250 - 400 Set 12,338.00
watt (without lamp)
29-3478 Saucer type lamp shade glass local Each 181.00

29-3479 Water tight Shade with glass Each 85.00

29-3480 Shade conical aluminum / enamel 250 mm Each 42.00

29-3481 Shade conical aluminum / enamel 300 mm Each 44.00

29-3482 Shade decorative with chain Each 280.00

29-3483 Shade decorative without chain Each 262.00

29-3484 Ballast Philips (Holland), model BHL 125 for mercury lamp Each 1420.00

29-3485 Ballast (Holland) but BHL 250 for mercury lamp Each 2247.00

29-3486 Ballast(China) but BHL 250 for mercury lamp Each 767.00

29-3487 Ballast (Holland) but BHL 400 for mercury lamp Each 2500.00

29-3488 Ballast (China) but BHL 400 for mercury lamp Each 768.00

29-3489 Ballast but BSX 90 for low pressure sodium lamp Each 2120.00

29-3490 Ballast but BSN 90 for high pressure sodium lamp Each 1870.00

29-3491 Ballast but BSN 400 for high pressure sodium lamp Each 1870.00

609
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3492 Choke for mercury light 250 watt Each 768.00

610
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3493 Choke but for mercury light 400 watt Each 1,250.00

29-3494 Choke for sodium lamp high pressure 400 watt Each 1,870.00

29-3495 Choke but for low pressure 55-90 watt Each 1,650.00

29-3496 Choke for tube light 20 watt Each 170.00

29-3497 Choke but for 40 watt Each 165.00

29-3498 Choke (Electronics) for tube light 40/20 watt Micro/sepon Each 180.00

29-3499 Choke (Electronics) for tube light 40/20 watt CATA Each 112.00

29-3500 Capacitor brand Philips 10 mfd Each 238.00

29-3501 - Ditto - but 20/40 mfd Each 415.00

29-3502 Glove ordinary opal type 150 mm dia Each 60.00

29-3503 - Ditto - but for 250 mm dia Each 162.00

29-3504 Glass Heat Proof (Foreign) for Flood light Each 575.00

29-3505 Glass for water tight bracket Each 35.00

29-3506 Globe white 150mm dia (ordinary) Each 62.00

29-3507 Holder for tube light flat D/L type Each 35.00

29-3508 - Ditto - but for spring type Each 35.00

29-3509 Lamp holder Bakelite BC for Brass bracket Each 23.00

29-3510 Lamp holder batten BC Bakelite Each 40.00

29-3511 - Ditto - but 450 angle Each 45.00

29-3512 Lamp holder BC Bakelite pendant /Cord grip Each 45.00

29-3513 Lamp holder brass BC Batten Each 28.00

611
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3514 Lamp holder Brass BC for bracket Each 65.00

29-3515 Lamp holder threaded Bakelite Each 27.00

612
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3516 Lamp holder threaded brass/porcelain Each 40.00

29-3517 Lamp holder threaded brass / porcelain for bracket Each 36.00

29-3518 Lamp holder threaded pendant Bakelite Each 27.00

29-3519 Tube Light (Eastern)-40 Watt Each 110.00

29-3520 Tube Light (Eastern)-20 Watt Each 90.00

29-3521 Indicating Lamp complete (Taiwan) Each 132.00

29-3522 Bulb for panel Indicator any colour (Taiwan) Each 99.00

29-3523 Sodium lamp (Bulb) 230 Volts, 55 watt Each 1,550.00

29-3524 Sodium lamp (Bulb) 230 Volts, 90 watt Each 1,780.00

29-3525 Lawn Lamp (Bulb) 200 Watt ordinary Each 68.00

29-3526 125 / 160 Watt Mercury Lamp blended Each 348.00

29-3527 Flood Lamp (Bulb) 300 / 500 Watt Each 112.00

29-3528 Flood Lamp (Bulb) 1000 Watt Each 170.00

29-3529 Halogen Lamp (Bulb) double ended 500 Watt Philips Each 192.00
Holland / French
29-3530 - Ditto - but for 1000 / 1500 Watt Philips Holland / French Each 450.00

29-3531 Emergency lantern light set (Micro) portable 2x6 watt tube Each 1,780.00

29-3532 Low Pressure sodium street / security lamps fixture Set 7,170.00
complete 55 watt
29-3533 -Ditto - but for 90 watt Set 8,850.00

29-3534 High pressure Mercury lamp brand Philips model HPL-N- Each 17,750.00
400 watt
29-3535 - Ditto - but 80 / 125 watt Each 345.00

29-3536 Blended Mercury lamp brand Philips model ML 125 / 160 Each 360.00
watt

613
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3537 - Ditto - but 250 watt Each 1,070.00

29-3538 Sodium lamp high pressure brand Philips model SON 250 Each 2,250.00
watt

614
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3539 - Ditto - but 400 watt Each 26,015.00

29-3540 Sodium lamp low pressure brand Philips model SOX 18 Each 2,365.00
watt
29-3541 - Ditto - but 35 watt Each 2,384.00

29-3542 - Ditto - but 55 watt Each 2,384.00

29-3543 - Ditto - but 90 watt Each 3,075.00

29-3544 Energy saving lamps (CFL) 15 watt, Pin / thread type Each 245.00
brand Osram (Economy)
29-3545 - Ditto - but Philips Each 256.00

29-3546 - Ditto - but Energypac Each 237.00

29-3547 - Ditto - but Plazama Each 232.00

29-3548 Energy saving lamps (CFL) 20 watt, Pin / thread type Each 250.00
brand Osram (Economy)
29-3549 - Ditto - but Philips Each 263.00

29-3550 - Ditto - but Energypac Each 260.00

29-3551 - Ditto - but Plazama Each 242.00

29-3552 Energy saving lamps (CFL) 23-25 watt, Pin / thread type Each 267.00
brand Osram (Economy)
29-3553 - Ditto - but Philips Each 289.00

29-3554 - Ditto - but Energypac Each 296.00

29-3555 - Ditto - but Plazama Each 264.00

29-3556 Energy saving lamps (CFL) 20 watt, Pin / thread type Each 263.00
brand Sainik
29-3557 - Ditto - but 25 watt Each 267.00

29-3558 - Ditto - but 26 watt (spiral) Each 275.00

29-3559 Philips Softone Lamps Candle Clear ES type Each 28.00

29-3560 - Ditto - but for Luster Milky Each 32.00

615
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3561 - Ditto - but for Candle Milky Each 34.00

29-3562 - Ditto - but for Partytone Luster (4 colour) Each 34.00

29-3563 - Ditto - but for Candle (4 colour) Each 34.00

29-3564 - Ditto - but for Practitone 100 watt Anti Insect BC type Each 35.00

616
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3565 Philips Tube light TLD 40 watt/54, 4 ft Each 110.00

29-3566 - Ditto - but for 36 watt Each 110.00

29-3567 - Ditto - but for 18 watt 2 ft Each 90.00

29-3568 Starter for tube light (India) Each 13.00

29-3569 - Ditto - but (Philips) Each 16.00

29-3570 Igniter brand Philips for high pressure sodium lamp SN-58 Each 1,180.00

29-3571 - Ditto- for low pressure sodium lamp SX 75/76 Each 1,180.00

29-3572 - Ditto- for metal Halide lamp SI-51 Each 1,192.00

29-3573 Osram Fluorescent Lamps Cap Size T8, Tube light 36 Each 94.00
Watt, Basic plus
29-3574 - Ditto - but Tube light 40 Watt, Osram standard T12 Each 89.00

29-3575 - Ditto - but Tube light 18 W / 765TII Each 76.00

29-3576 - Ditto - but Tube light 20 Watt Each 78.00

29-3577 Osram dobule ended Tungsten Halogen Lamp Cap Size Each 157.00
R7S, 150 Watt
29-3578 - Ditto - but Halogen Lamp 200 Watt Each 154.00

29-3579 - Ditto - but Halogen Lamp 300 Watt Each 260.00

29-3580 - Ditto - but Halogen Lamp 500 Watt Each 262.00

29-3581 - Ditto - but Halogen Lamp 1000 Watt Each 450.00

29-3582 - Ditto - but Halogen Lamp 1500 Watt Each 562.00

29-3583 - Ditto - but Halogen Lamp 2000 Watt Each 935.00

29-3584 Osram Mercury - Tungsten Blended Lamp Cap Size Each 310.00
E27/B22, 160 Watt
29-3585 - Ditto - but Cap Size E40 Mercury HWL Lamp 250 Watt Each 415.00

29-3586 Osram Mercury - Delux HQL Lamp Cap Size E40, 250 Each 592.00
Watt
29-3587 - Ditto - but 400 Watt Each 772.00

29-3588 Osram High Pressure Metal Halide Lamp, Cap Size E40 Each 1,550.00
HQI 250 Watt
29-3589 - Ditto - but 400 Watt Each 2,035.00

29-3590 Philips (Holland) Metal Halide Lamp, 250 Watt Each 1,419.00

617
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3591 - Ditto - but 400 Watt Each 1,758.00

29-3592 Osram High Pressure Sodium Lamp, Cap Size E40 NAV- Each 1,726.00
T 250 Watt
29-3593 - Ditto - but 400 Watt Each 2,010.00

618
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3594 Philips High Pressure Sodium Lamp, 250 Watt Each 1,715.00

29-3595 - Ditto - but 400 Watt Each 1,870.00

29-3596 Osram Low Pressure Sodium Lamp, Cap Size B22 SOX Each 1,830.00
90 Watt
29-3597 - Ditto - but 55 Watt Each 1,597.00

29-3598 - Ditto - but 35 Watt Each 1,478.00

29-3599 - Ditto - but 18 Watt Each 1,478.00

29-3600 Lamp Electric incandcent 100 watt Each 25.00

29-3601 - Ditto - but 60 watt Each 22.00

29-3602 - Ditto - but 40 watt Each 22.00

29-3603 - Ditto - but 25 watt Each 22.00

29-3604 - Ditto - but 5 watt Each 22.00

29-3605 Tube light Swash Cat No. SCTF-34x1x40 watt Each 1,087.00

29-3606 Tube light Swash Cat No. SCRL-2x2x40 watt Each 1,833.00

29-3607 Bracket bathCrescent Cat No.CBB-4/12-T12-P Each 585.00

29-3608 Bracket wallCrescent Cat No.CB-751 (1) 676 Each 525.00

29-3609 Bracket wallGloria Cat No. GWB-1589-2151 T Each 828.00

29-3610 Bracket wallGloria Cat No. GWB-1501-2286 FR Each 710.00

29-3611 Bracket wallGloria Cat No. GWB-1511-2114/1828 Each 828.00

29-3612 Bracket wallGloria Cat No. GWB-2543-1814 Each 532.00

29-3613 Bracket wallGloria Cat No. GWB-1205-1809 Each 313.00

29-3614 Bracket wallSwash Cat No. SCSB-220 DT 743 Each 598.00

29-3615 Light fixture Gloria Cat No. GWT-713 Each 599.00

29-3616 Bracket wallSwash Cat No. SCS-112 (B) G 8" NC Each 422.00

29-3617 Ceiling light Crescent Cat No.CML-430-Plan Each 1,762.00

29-3618 Ceiling light Gloria Cat No. GCF-602 Each 265.00

29-3619 Chandelier Gloria Cat No. GCF-1197 (18)-2404 Each 28,050.00

29-3620 Chandelier Gloria Cat No. GCF-1196 (11)-2278 Each 22,250.00

29-3621 Spot light Gloria Cat No. GSL-384 Each 390.00

29-3622 Ceiling light Gloria Cat No. GCF-640 Each 975.00

29-3623 Ceiling light Gloria Cat No. GCF-661 Each 946.00

29-3624 Ceiling light Gloria Cat No. GCF-707 AB Each 935.00

619
RESTRICTED
 RESTRICTED
SECTION-29
PART-II
LIGHT FITTINGS / FIXTURES

Item no Description of Materials Unit Rate in Taka Remark

s
29-3625 Ceiling light Crescent Cat No.CB-610-668CH Each 1,015.00

29-3626 Blank

29-3700

620
RESTRICTED
 RESTRICTED
SECTION-30

LABOUR RATES

The following labour rates have been used in compiling the rates in MES Schedule-2016
and the same rates will be used in preparing star price etc.
Rate with 10% profit+
Rate per day 3.5% overhead & 5.5%
Item No Labour with usual tools VAT for making
Remarks
of 8 hrs.
STAR Rate

30-01 Head mason 750.00 897.00

30-02 Labour (Skilled) 500.00 598.00

30-03 Labour (Unskilled) 400.00 478.40

30-04 Black smith / Rod mistry 600.00 717.60

30-05 Brick layerer / Mason 600.00 717.60

30-06 Carpenter 600.00 717.60

30-07 Helper for carpenter 400.00 478.40

30-08 Glazier 600.00 717.60

30-09 Hammer man 600.00 717.60

30-10 Mali 500.00 598.00

30-11 Mate 500.00 598.00

30-12 Painter / Sign writer 600.00 717.60

30-13 Pipe fitter 600.00 717.60

30-14 Plumber 600.00 717.60

30-15 Sweeper 550.00 657.80

30-16 Thatcher 500.00 598.00

30-17 Mosaic mistry 600.00 717.60

30-18 Tiler 600.00 717.60

30-19 Marble / Granite layerer 700.00 837.20

30-20 Wire man 600.00 717.60

30-21 Line man 600.00 717.60

905
RESTRICTED
 RESTRICTED
SECTION-30

LABOUR RATES

The following labour rates have been used in compiling the rates in MES Schedule-2016
and the same rates will be used in preparing star price etc.
Rate with 10% profit+
Rate per day 3.5% overhead & 5.5%
Item No Labour with usual tools VAT for making
Remarks
of 8 hrs.
STAR Rate

30-22 Cable jointer / Layerer 700.00 837.20

30-23 Tin smith 600.00 717.60

30-24 Welder 600.00 717.60

30-25 Gas fitter 600.00 717.60

30-26 Air condition & Refrigerator Mechanic700.00 837.20

30-27 Cabinet maker 600.00 717.60

30-28 Polisher 600.00 717.60

30-29 Upholster 600.00 717.60

30-30 Upholster helper 400.00 478.40

30-31 Technician 600.00 717.60

30-32 Aluminium fabricator 700.00 837.20

30-33 Helper for aluminium / SS fabricator 400.00 478.40

30-34 Cane man 600.00 717.60

30-35 Foreman 700.00 837.20

30-36 Rig man 700.00 837.20

30-37 Winch man 700.00 837.20

30-38 OED ( Generator / Road roller /
Vibrator / Mixer Machine etc.) 700.00 837.20

30-39 Pilling crew 600.00 717.60

30-40 SS Welder / Fabricator 700.00 837.20

30-41 Lacquer Polisher/Painter 450.00 538.20

30-42 Painter/Tin smith helper 400.00 478.40

906
RESTRICTED
 RESTRICTED
SECTION-29
MATERIALS SUPPLIED ONLY (With Carrying Charges)
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4701 API grade Gas pipe, 150 mm outer dia 168.3 mm Metre 3,848.00

29-4702 - Ditto - but 100 mm outer dia 114.3 mm Metre 2,226.00

29-4703 - Ditto - but 75 mm outer dia 88.9 mm Metre 1,437.00

29-4704 - Ditto - but 50 mm outer dia 60.3 mm Metre 928.26

29-4705 - Ditto - but 40 mm outer dia 43.4 mm Metre 680.00

29-4706 - Ditto - but 25 mm outer dia 33.7 mm Metre 431.61

29-4707 - Ditto - but 20 mm outer dia 26.7 mm Metre 295.00

29-4708 Bend / Elbow (MS) API grade 150 mm dia Each 1,365.00

29-4709 - Ditto - but 100 mm Each 650.00

29-4710 - Ditto - but 75 mm Each 325.00

29-4711 - Ditto - but 50 mm Each 170.00

29-4712 - Ditto - but 40 mm Each 150.00

29-4713 - Ditto - but 25 mm Each 58.00

29-4714 - Ditto - but 20 mm Each 38.00

29-4715 Tee equal (MS) API grade 150 mm Each 1,932.00

29-4716 - Ditto - but 100 mm Each 850.00

29-4717 - Ditto - but 75 mm Each 630.00

29-4718 - Ditto - but 50 mm Each 400.00

29-4719 - Ditto - but 40 mm Each 280.00

29-4720 - Ditto - but 25 mm Each 250.00

29-4721 - Ditto - but 20 mm Each 309.00

Tee unequal (MS) API grade 150 mm x down to 20 mmEach 2,045.00
29-4722

29-4723 - Ditto - but 100 mm x down to 20 mm Each 900.00

29-4724 - Ditto - but 75 mm x down to 20 mm Each 630.00

642
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4725 - Ditto - but 50 mm x down to 20 mm Each 375.00

29-4726 - Ditto - but 40 mm x down to 20 mm Each 275.00

29-4727 - Ditto - but 25 mm x down to 20 mm Each 350.00

643
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4728 MS Reducer 150x100 down to 20 mm dia Each 845.00

29-4729 - Ditto - but 100x75 down to 20 mm dia Each 371.00

29-4730 - Ditto - but 75x50 down to 20 mm dia Each 345.00

29-4731 - Ditto - but 50 x 40 down to20 mm dia Each 150.00

29-4732 - Ditto - but 40 x 25 down to 20 mm dia Each 140.00

29-4733 Flange W/N nut gas quality 150 mm Each 3,097.00

29-4734 - Ditto - but 100 mm Each 1,250.00

29-4735 - Ditto - but 75 mm dia Each 1,150.00

29-4736 - Ditto - but 50 mm dia Each 650.00

29-4737 - Ditto - but 40 mm dia Each 575.00

29-4738 - Ditto - but 25 mm dia Each 300.00

29-4739 Gasket asbestos gas quality 150 mm Each 486.00

29-4740 - Ditto - but 100 mm Each 120.00

29-4741 - Ditto - but 75 mm dia Each 110.00

29-4742 - Ditto - but 50 mm dia Each 90.00

29-4743 - Ditto - but 25 mm dia Each 65.00

29-4744 Flange Tee gas quality for 150 x 100, down to 20 mm Each
dia 199,268.00

29-4745 - Ditto - but 100 x 75, down to 20 mm dia Each 98,000.00

29-4746 - Ditto - but 75 x 50, down to 20 mm dia Each 77,000.00

29-4747 Service Tee 25x20 mm dia Each 1,600.00

29-4748 Valve Plug 150 mm dia Each 56,212.00

29-4749 - Ditto - but 100 mm dia Each 20,500.00

29-4750 - Ditto - but 75 mm dia Each 12,500.00

29-4751 - Ditto - but 50 mm dia Each 6,000.00

644
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4752 - Ditto - but 40 mm dia Each 5,500.00

29-4753 - Ditto - but 25 mm dia Each 3,100.00

29-4754 - Ditto - but 20 mm dia Each 1,800.00

645
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4755 Valve Tee 50 x 40 down to 20 mm dia Each 15,000.00

29-4756 - Ditto - but 40 x25 down to 20 mm dia Each 15,000.00

29-4757 Saddle welding and drilling consumable / kits for Set 550.00
100x75 mm

29-4758 -Ditto-but 75x50 mm dia Each 450.00

29-4759 -Ditto-but 50x37.5 mm dia Each 400.00

29-4760 -Ditto-but 40x25 mm dia Each 300.00

29-4761 -Ditto-but 25x20 mm dia Each 275.00

29-4762 Stud bolt 20 x30 mm Each 100.00

29-4763 - Ditto - but 25 x 50 mm Each 120.00

29-4764 Welding Electrode 8 SWG Each 7.00

29-4765 Wrapping Tape 100 mm x 120 metre Reel 2,453.00

29-4766 - Ditto - but 50 mm x 60 metre Reel 640.00

29-4767 PVC Primer Litre 285.00

29-4768 Rent / Fee for T&P / apparatus for GT test point
(Cathodic protection) Point 3,332.00

29-4769 - Ditto - but for thrust boring equipments Day 390.00

29-4770 - Ditto - but for Purging/Testing Day 250.00

29-4771 Gas Regulator for 25 / 20 mm dia (Domestic) Each 1,500.00

29-4772 - Ditto - but (Commercial) Each 3,000.00

29-4773 Gas Valve for 25 mm dia Each 500.00

29-4774 - Ditto - but 20 mm dia Each 450.00

29-4775 - Ditto - but 13 mm dia Each 350.00

29-4776 - Ditto - but 6.5 mm dia Each 175.00

646
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4777 Gas Chulla (Single) 350 x 350 mm made with 22 BG sheet

Each 750.00

29-4778 - Ditto - but 300 x 300 mm Each 700.00

- Ditto - but 20 BG 750 x 310 mm / 750x300

29-4779 Each 1,500.00
mm RFL (Double)

647
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4780 - Ditto - but 650 x 350 mm (Double) Each 900.00

29-4781 - Ditto - but auto fire, local made double as available

Each 3,550.00

29-4782 - Ditto - but auto foreign made ss double as Each 5,000.00

available
29-4783 LP Gas Chulla (350x350 mm) Single with brass Each 700.00
burner & nozzle

29-4784 - Ditto - but with CI burner & nozzle Each 525.00

29-4785 Knob for gas burner Each 25.00

29-4786 Injector Nozzle 4.25 cu. m Each 700.00

29-4787 - Ditto - but 3.5 cu. m Each 650.00

29-4788 - Ditto - but 2.75 cu. m Each 600.00

29-4789 - Ditto - but 2.00 cu. m Each 590.00

29-4790 - Ditto - but 1.50 cu. m Each 530.00

29-4791 Injector only Each 90.00

29-4792 Commercial Star burner 4.25 cu. M Each 700.00

29-4793 - Ditto - but 3.50 cu. m Each 600.00

29-4794 - Ditto - but 2.75 cu. m Each 550.00

29-4795 - Ditto - but 2.00 cu. m Each 455.00

29-4796 - Ditto - but 1.50 cu. m Each 430.00

29-4797 Earthen Tondoor large Each 1,500.00

29-4798 - Ditto - but medium Each 1,200.00

29-4799 - Ditto - but small Each 1,000.00

29-4800 Top plate for tondoor made by MS plate of 20 mm Each 3,500.00
thick

29-4801 - Ditto - but 13 mm thick Each 2,200.00

29-4802 - Ditto - but 9 mm thick Each 1,500.00

29-4803 MS Steel Plate 20 mm thick kg 85.00

29-4804 - Ditto - but 13 mm thick kg 85.00

648
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4805 - Ditto - but 9 mm thick kg 85.00

29-4806 MS Sheet 3 mm thick for Steel tondoor kg 94.00

649
RESTRICTED
 RESTRICTED
SECTION-29
GAS & OIL SUPPLY

PART-IV

Item No Description of Materials Unit Rate in Tk Remarks

29-4807 Valve pit cover (MS) as per gas co.'s specification kg 96.00

29-4808 LP Gas Regulator standard size foreign made and Each 800.00
approved brand

29-4809 - Ditto - hose pipe PVC 12 mm dia approved Each 70.00

brand

29-4810 - Ditto - Nipple made of brass Each 70.00

29-4811 Ditto - Cylinder (Empty) foreign made Each 2,175.00

approved brand

29-4812 - Ditto - Cylinder (with gas) foreign made

approved brand Each 3,250.00

End

650
RESTRICTED
 RESTRICTED
SECTION-20
DEMOLITION AND DISMANTLING RATES
Item Description

CONCRETE Rate in Taka

Add for portion
Per Cubic metre Demolition
dismantled

20-1 Demolition of un-reinforced cement concrete including 1493.00 229.00

lime concrete

20-2 Demolition of reinforced concrete floor or roof slabs etc,

separating reinforcement from concrete including
cleaning and straightening the same. 1996.00 229.00

20-3 - Ditto - when reinforcement is not required to be 1811.00 223.00

separated

WALLS, FOUNDATIONS ETC.

20-4 Demolition of brick work or stone masonry incl. coping,
quoins etc 1311.00 219.00

20-5 Demolition of walls built in brick work concrete block or

stone masonry built in lime or cement mortar incl. pillars,
lintels, struts etc. 1835.00 219.00

20-6 Removing mud from roofs including plastering and 741.00 -

leeping, if any

FLOORs
Per Square metre
20-7 Take up stone or precast concrete slab, floors etc having
thickness 100 to 150 mm laid in any mortar 184.00 39.80

CUTTING OPENINGS Rate in Taka

Burnt brick work or Lime or RCC incl.

Per Cubic metre concrete block in any cement cutting of
mortar concrete reinforcement

20-8 Cutting through walls etc for door,

window or other opening or enlarging
existing opening and from reveals as 2229.00 2311.00 1240.00
specified.

347
RESTRICTED
 RESTRICTED
SECTION-20
DEMOLITION AND DISMANTLING RATES
Item Description
20-9 Cutting small openings for pipes etc
where surface area does not exc. 0.1
3828.00 4240.00 6913.00
sq.m & make good around the same

348
RESTRICTED
 RESTRICTED
SECTION-20
DEMOLITION AND DISMANTLING RATES
Item Description

WOOD WORK

Per Cubic metre Rate in Taka

20-10 Cut out & demolish timber in scantling in any position
not else where provided for , clear out nails etc , remove
1,728.00
and stack at site

-Ditto-but timber boarding (incl. Flooring) or pharas any

20-11 1,549.00
thickness

Per metre

All as last item, but ballies of any

20-12 19.00
diametre.
IRON AND STEEL WORK Rate in Taka

Per metre
20-13 Take down cast(or sheet) iron or asbestos cement flue (or
smoke) pipes, caves, gutters rain water pipes, valley
gutters or flashings, ridges & hips incl. bends, swan
necks, shoes, etc & any supports or brackets there to
36.00
(gutters, flashings, ridges & hips to be measured under
this item only when not taken down as part of roofing).

Per Kg
20-14 Dismantle steel or iron work of any description and in
any position not else where provided for 36.00

Per Square metre

20-15 -Ditto- iron or steel sheeting in hearths, iron covering to
doors, frames, curves, mongaries, & similar fittings of
66.00
any description or gauge.

ROOF ETC

Per Square metre

349
RESTRICTED
 RESTRICTED
SECTION-20
DEMOLITION AND DISMANTLING RATES
Item Description
20-16 - Ditto - but AC/GI corrugated sheets & any type of plain
sheeting to wall, ceiling, roofing gates etc incl. ridges,
hips valleys, wind ties, barge & eaves boarding (net area
80.80
of roof &/or walls to be measured)

350
RESTRICTED
 RESTRICTED
SECTION-20
DEMOLITION AND DISMANTLING RATES
Item Description

MISCELLANEOUS

Per Square metre

20-17 Dismantling single tiling of brick or PCC in roof or floors

laid in cement mortar incl. half bricks or block on edge in
any position 95.00

20-18 - Ditto - but of any other description incl. ridges, hips or

vallyes (Net area of roof surface measured, no additional
allowances for ridges, hips and vallyes) 95.00

20-19 Dismantling double tiling of brick or PCC in roof laid in

cement mortar incl. half bricks or block on edge in any
138.00
position

20-20 - Ditto - but any other description incl. ridges, hips and
vallyes (Net surface or roof area to be measured) 138.30

- Ditto - but single tiling to roof , -

20-21 54.00
ditto-

MISCELLANEOUS
Per Square metre

Rate in Taka
20-22 Taking down bamboo framing, mattings (incl. matting
doors & windows) or trellis work or tile batten of any
number or layers, size gauge, spacing or description 54.00

20-23 Dismantling of hard board, soft board or cloth etc from

ceiling & partition of any description incl. removing
fillets, moulding, nail, screws etc. 60.00

FINISHING

351
RESTRICTED
 RESTRICTED
SECTION-20
DEMOLITION AND DISMANTLING RATES
Item Description
20-24 Carefully taking up or down glazed or acoustic tiling to
floors, hearths or walls incl. border, skirtings, moulding
coppings etc & cement mortar setting but not backing. 132.00

352
RESTRICTED
 RESTRICTED
SECTION-20
DEMOLITION AND DISMANTLING RATES
Item Description
PLUMBING AND DRAINS

Per Kg

20-25 Taking down sheet lead in flats, gutters, dormers

flashings, ridges, hips, cistern etc & similar work (Not to
be paid when gutters, ridges & hips are taken down as 14.00
part of roofing)

Rate in Taka

BOTTOMING Flat soling Herring bone

Demolition Re-use
Demolition & Re-use after
Per Square metre & after
Removing cleaning
Removing cleaning
20-26 Demolition / Dismantling of
bottoming (Flat soling /herring bone)
in any description incl. re-using after 29.90 43.00 48.00 68.00
cleaning where necessary.

Rate in Taka
Bore of Pipe
Remove to store
Per Meter 10 cm 15 cm 22.5 cm

20-27 Demolition/Taking up of RCC pipe

from any places 86.00 120.00 150.00 48.00

Rate in Taka
Edging
Re-use after
Per Square metre Demolition & Removing
cleaning
20-28 Demolition / Dismantling of bottoming (Edging)
in any description incl. re-using after cleaning
100.00 126.00
where necessary.

353
RESTRICTED