MC-Fix ST

Rapid-setting Repair Grout for Stopping Water Leakages

Properties
 Sets within minutes and develops the normal 28 days strength within hours
 Ready-to-use, requires only addition of water
 Free from chloride and other harmful substances

Areas of Application
 Tunnels, subways and underground structures, sewage works, tanks and pipes
 Fillings holes left by tie wires, wood and steel seperators etc.
 Fast installation and connection work in concrete and masonry

Application
General
MC-Fix ST is a specially developed one component Mix MC-Fix ST with water in the ratio of about 3 : 1
formulation, which stops leakage, seepage and running (MC-Fix ST powder : Water) and knead rapidly to a
water in concrete or masonry walls and floors within pasty consistency.
minutes. It provides immediate and reliable repair-work
against undesired water leakage. MC-Fix ST is free Mix only small quantities which can be applied
from chlorides and other harmful substances, and can instantly.
be universally used to stop leaking and running water in
concrete as well as brickwork. Take the paste in the hand (the wearing of thick
hand gloves is absolutely mandatory due to the heat
MC-Fix ST does not only stop water leakage instantly, development) and quickly form into a shape of a
but also develops the normal 28 days strength of ball, plug the cut dovetail and press firmly with the
concrete within hours. aid of a trowel or similar tool, and keep pressing
firmly for about 1-2 minutes until the compound sets.
MC-Fix ST can also be used as an anchoring aid for
bolts, mechanical posts, poles etc. in concrete and If water is gushing in under high pressure, insert a
masonry, or wherever rapid hardening and quick plastic pipe into the point of leakage and plug the
strength are required. MC-Fix ST has varied usage for compound around the pipe. Once the compound
almost all civil engineering structures, both old and new. around the pipe is hardened, pull off the pipe and
plug the hole left from the pipe.
Instructions for use
Examine the area where water is leaking or gushing in Before the compound has fully hardened, smooth out
and identify the cause. the surface using suitable tools. Immediately after an
active water leakage has been stopped, remove the
Where water is leaking chip the surface to form a V- excess plugging material from the surroundings.
shape dovetail. Cut at the point of leakage and
remove all dirt, loose particles, debris and Keep the plugging slightly wet by gently sprinkling
contaminants adjacent to it. water for about 15 - 30 minutes depending on
ambient temperatures.
From here on gloves should be worn at all times until
completion of the work. Do not apply the compound if it shows signs of
hardening before application, and do not add more
water to make it workable again.

_________________________________________________________________________________________________________________________________________________________________

MC-Bauchemie GmbH & Co. KG • Am Kruppwald 1-8 • D-46238 Bottrop • Tel : +49 (0)2041 101-10 • Fax : +49 (0) 2041-101 188
MC Bauchemie (M) Sdn Bhd • Lot S113 • 2nd Floor • Centrepoint • No.3 Lebuh Bandar Utama • Bandar Utama • 47800 Petaling Jaya • Selangor • Malaysia • Tel: +603 7728 1233 • Fax: +603 7728 6833
MC-Bauchemie Singapore Pte Ltd • 12A Sixth Avenue • Singapore 276475 • Tel : +65 6462 0362 • Fax : +65 6466 0205
MC-Bauchemie Taiwan Co Ltd • No. 14 Road 30 • Taichung Industrial Park • Taiwan • Tel : +886 4 2355 0345 • Fax : +886 4 2355 0349
www.mc-bauchemie.com
 Technical Data for MC-Fix ST
Characteristic Unit Value Comments
Mixing Ratio p.b.v. 3:1 MC-Fix ST powder : Water
Application Time seconds ~60 at 20 °C

Product Characteristics for MC-Fix ST

Delivery 12 & 24 kg bucket
Can be stored in cool and dry conditions for one year in original
Storage
unopened packs.
Disposal Buckets must be emptied completely.

Note: The information on this data sheet is based on our experiences and correct to the best of our knowledge. It is, however, not binding. It has
to be adjusted to the individual structure, application purpose and especially to local conditions. Our data refers to the accepted engineering rules,
which have to observed during application. This provided we are liable for the correctness of this data within the scope of our terms and
conditions of sale-delivery-and-service. Recommendations of our employees which differ from the data contained in our information sheets are
only binding if given in written form. The accepted engineering rules must be observed at all times.

Edition 02/14. Some technical changes have been made to this print medium. Older editions are invalid and may not be used anymore. If a
technically revised new edition is issued, this edition becomes invalid.

_________________________________________________________________________________________________________________________________________________________________

MC-Bauchemie GmbH & Co. KG • Am Kruppwald 1-8 • D-46238 Bottrop • Tel : +49 (0)2041 101-10 • Fax : +49 (0) 2041-101 188
MC Bauchemie (M) Sdn Bhd • Lot S113 • 2nd Floor • Centrepoint • No.3 Lebuh Bandar Utama • Bandar Utama • 47800 Petaling Jaya • Selangor • Malaysia • Tel: +603 7728 1233 • Fax: +603 7728 6833
MC-Bauchemie Singapore Pte Ltd • 12A Sixth Avenue • Singapore 276475 • Tel : +65 6462 0362 • Fax : +65 6466 0205
MC-Bauchemie Taiwan Co Ltd • No. 14 Road 30 • Taichung Industrial Park • Taiwan • Tel : +886 4 2355 0345 • Fax : +886 4 2355 0349
www.mc-bauchemie.com