Scribd
Upload
89 views

Hammer Crushers With Rollers KDV en

Hammer crushers KDV are used to crush sticky and moist materials like coal, clay, and ceramics. They have a hammer rotor and rotating rollers that prevent material from getting stuck. The rollers rotate and are cleaned by scrapers. KDV crushers can be installed together on a shared frame. They produce an output size of 90% under 30-40 mm and have high capacity, reliability, and service life of crushing elements.

Uploaded by

vjakovljevic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views

Hammer Crushers With Rollers KDV en

Hammer crushers KDV are used to crush sticky and moist materials like coal, clay, and ceramics. They have a hammer rotor and rotating rollers that prevent material from getting stuck. The rollers rotate and are cleaned by scrapers. KDV crushers can be installed together on a shared frame. They produce an output size of 90% under 30-40 mm and have high capacity, reliability, and service life of crushing elements.

Uploaded by

vjakovljevic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Hammer crushers KDV with rollers

Hammer crushers with rollers


CRUSHING
Hammer crushers KDV are used for crushing The crushing area consists of a hammer rotor
of sticky and moistened materials. They are and a group of rotating rollers that prevent the
used especially for crushing of bituminous processed material to deposit in the crusher.
coal and lignite of moisture up to 50%, clay The rollers rotate in operation and they are
components of moisture up to 25%, raw kaolin cleaned with scrapers. KDV crushers are
of moisture 25%, clay gypsum of moisture up reverse ones. They can be positioned together
to 18% as well as for crushing of bauxite, brick with a drive on one common frame and flexible
and ceramic raw materials. seating.

The crusher may be equipped with an


automatic lubrication system.
Main operating properties are:
 high operating reliability  insensitivity towards uncrushable pieces
 low cost for operation and maintenance  long service life of crushing elements
 easy operation and maintenance  outlet gran size is 90% 30 mm – 40 mm
 high specific capacity
 high resistance against clogging of the
crushing area
Crusher KDV 1013 – coal crushing 350t/h
Main parameters
Inlet
Type opening Max. inlet piece Capacity* El. motor
size
mm m3 mm t/h kW
KDV 0606 670x630 0,03 500 90-150 55-75
KDV 1010 1030x995 0,05 500 230-380 100-200
KDV 1013 1030x1265 0,05 600 300-500 250-400
KDV 1313 1260x1245 0,06 800 550-900 315-500
KDV 1318 1260x1750 0,06 800 750-1250 400-630
KDV 1616 1650x1620 0,1 900 1000-2000 500-1000
KDV 1622 1650x2200 0,1 1000 1300-2500 800-1200

Main parameters of crushers KDV

Crushers KDV 1313 – coal crushing 400t/h

Type A B C D E F
mm mm mm mm mm mm
KDV 0606 2200 1100 900 865 2000 990
KDV 1010 2420 1660 1250 1220 2465 1485
Cut through the crusher KDV
KDV 1013 2420 1930 1250 1490 2735 1485
KDV 1313 3280 1820 1500 1535 2570 2000
KDV 1318 3280 2350 1500 2040 3100 2000
KDV 1616 3900 2280 1900 1880 3500 2500
KDV 1622 3900 2880 1900 2480 4100 2500
1

You might also like