www.fairchildsemi.

com

KA3S0765R/KA3S0765RF
www.DataSheet4U.com

Fairchild Power Switch(SPS)

Features Description
• Wide operatimg frequency range up to (150kHz) The SPS product family is specially designed for an offline
• Pulse by pulse over current limiting SMPS with minimal external components. The SPS consist
• Over load protection of high voltage power SenseFET and current mode PWM
• Over voltage protecton (Min. 23V) IC. Included control IC features a trimmed oscillator, under
• Internal thermal shutdown function voltage lock-out, leading edge blanking, optimized gate turn-
• Under voltage lockout on/turn-off driver, thermal shut down protection, over volt-
• Internal high voltage sense FET age protection, temperature compensated precision current
• External sync terminal sources for loop compensation and fault protection circuit.
• Auto Restart Mode Compared to discrete MOSFET and controller or RCC
switching converter solution, a SPS can reduce total compo-
nent count, design size, weight and at the same time increase
& efficiency, productivity, and system reliabilit. It has a
basic platform well suited for cost-effective C-TV power
supply.

TO-3P-5L TO-3PF-5L

1
1

1. DRAIN 2. GND 3. Vcc 4. FB 5. Sync

Internal Block Diagram

#3 VCC
32V 5V Internal #1 DRAIN
Vref bias SFET
Good
logic
#5 Sync −
+ OSC
5V
S
6.4V Q
R
#4 FB −
L.E.B
2µA 1mA 2.5R +
9V 1R
0.1V
+
7.5V − S #2 GND
Q
R
+ Thermal S/D
25V − Power on reset
OVER VOLTAGE S/D

Rev.1.0.1
©2001 Fairchild Semiconductor Corporation
 KA3S0765R/KA3S0765RF

Absolute Maximum Ratings

www.DataSheet4U.com

Characteristic Symbol Value Unit

(1) VD,MAX
Maximum drain voltage 650 V
Drain-gate voltage (RGS=1MΩ) VDGR 650 V
Gate-source (GND) Voltage VGS ±30 V
Drain current pulsed (2) IDM 28.0 ADC
Avalanche current IAS 20 A
Continuous drain current (TC=25°C) ID 7.0 ADC
Continuous drain current (TC=100°C) ID 5.6 ADC
Maximum supply voltage VCC,MAX 30 V
Input voltage range VFB −0.3 to VSD V
PD (watt H/S) 140 W
Total power dissipation
Derating 1.11 W/°C
Operating ambient temperature TA −25 to +85 °C
Storage temperature TSTG −55 to +150 °C

Notes:
1. Tj=25°C to 150°C
2. Repetitive rating: Pulse width limited by maximum junction temperature
3. L=24mH, VDD=50V, RG=25Ω, starting Tj=25 °C

2
 KA3S0765R/KA3S0765RF

Electrical Characteristics (SFET part)

www.DataSheet4U.com
(Ta = 25°C unless otherwise specified)

Characteristic Symbol Test condition Min. Typ. Max. Unit

Drain-source breakdown voltage BVDSS VGS=0V, ID=50µA 650 - - V

VDS=Max., Rating, - - 50 µA
VGS=0V
Zero gate voltage drain current IDSS
VDS=0.8Max., Rating, - - 200 mA
VGS=0V, TC=125°C
Static drain-source on resistance (note) RDS(ON) VGS=10V, ID=4.0A - 1.25 1.6 W

Forward transconductance (note) gfs VDS=15V, ID=4.0A 3.0 - - S

Input capacitance Ciss - 1600 - pF

VGS=0V, VDS=25V, - 310 -
Output capacitance Coss
f=1MHz
Reverse transfer capacitance Crss - 120 -

Turn on delay time td(on) - 25 - nS

VDD=0.5BVDSS, ID=7.0A
Rise time tr (MOSFET switching - 55 -
time are essentially
Turn off delay time td(off) - 80 -
independent of
Fall time tf operating temperature) - 50 -

Total gate charge VGS=10V, ID=7.0A, - - 72 nC

Qg
(gate-source+gate-drain) VDS=0.5BVDSS (MOSFET
switching time are - 9.3 -
Gate-source charge Qgs
essentially independent of
Gate-drain (Miller) charge Qgd operating temperature) - 29.3 -

Note:
Pulse test: Pulse width < 300µS, duty cycle < 2%
1
S = ----
R

3
 KA3S0765R/KA3S0765RF

Electrical Charcteristics (CONTROL part)

www.DataSheet4U.com
(Ta = 25°C unless otherwise specified)

Characteristic Symbol Test condition Min. Typ. Max. Unit

UVLO SECTION
Start threshold voltage VSTART - 14 15 16 V
Stop threshold voltage VSTOP After turn on 9 10 11 V
OSCILLATOR SECTION
Initial accuracy FOSC Ta=25°C 18 20 22 kHz
Frequency change with temperature (2) ∆F/∆T −25°C≤Ta≤+85°C - ±5 ±10 %
Maximum duty cycle Dmax - 92 95 98 %
FEEDBACK SECTION
Feedback source current IFB Ta=25°C, Vfb=GND 0.7 0.9 1.1 mA
Shutdown Feedback voltage VSD - 6.9 7.5 8.1 V
Shutdown delay current Idelay Ta=25°C, 5V≤Vfb≤VSD 1.4 1.8 2.2 µA
SYNC. & SOFT START SECTION
Soft start voltage VSS VFB=2V 4.7 5.0 5.3 V
Soft start current ISS Sync & S/S=GND 0.8 1.0 1.2 mA
Sync threshold voltage(3) VSYTH Vfb=5V 6.0 6.4 6.8 V
REFERENCE SECTION
Output voltage (1) Vref Ta=25°C 4.80 5.00 5.20 V
Temperature Stability (1)(2) Vref/∆T −25°C≤Ta≤+85°C - 0.3 0.6 mV/°C
CURRENT LIMIT (SELF-PROTECTION) SECTION
Peak Current Limit IOVER Max. inductor current 4.40 5.00 5.60 A
PROTECTION SECTION
Thermal shutdown temperature (Tj) (1) TSD - 140 160 - °C
Over voltage protection voltage VOVP - 23 25 28 V
TOTAL DEVICE SECTION
Start Up current ISTART VCC=14V 0.1 0.3 0.55 mA
Operating supply current
IOP Ta=25°C 6 12 18 mA
(control part only)
VCC zener voltage VZ ICC=20mA 30 32.5 35 V

NOTE:
1. These parameters, although guaranteed, are not 100% tested in production
2. These parameters, although guaranteed, are tested in EDS(water test) process
3.The amplitude of the sync. pulse is recommended to be between 2V and 3V for stable sync. function.

4
 KA3S0765R/KA3S0765RF

Typical Performance Characteristics

www.DataSheet4U.com
(These characteristic graphs are normalized at Ta = 25°C)

Fig.1 Operating Frequency Fig.2 Feedback Source Current

1.2 1.2
1.15 1.15
1.1 1.1
1.05 1.05
Fosc 1 Ifb 1
IFB
0.95 0.95
0.9 0.9
0.85 0.85
0.8 0.8
-25 0 25 50 75 100 125 150 -25 0 25 50 75 100 125 150
Temperature [°C] Temperature [°C]

Figure 1. Operating Frequency Figure 2. Feedback Source Current

Fig.3 Operating Current Fig.4 Max Inductor Current

1.2 1.1
1.15 1.05
1.1
Iover
Ipeak 1
1.05
Iop 1 0.95
0.95 0.9
0.9
0.85 0.85
0.8 0.8
-25 0 25 50 75 100 125 150 -25 0 25 50 75 100 125 150
Temperature [°C] Temperature [°C]

Figure 3. Operating Supply Current Figure 4. Peak Current Limit

Fig.5 Start up Current Fig.6 Start Threshold Voltage

1.5 1.15
1.3 1.1
1.05
1.1
IIstart
ST V th(H) 1
Vstart
0.9
0.95
0.7 0.9
0.5 0.85
-25 0 25 50 75 100 125 150 -25 0 25 50 75 100 125 150
Temperature [°C] Temperature [°C]

Figure 5. Start up Current Figure 6. Start Threshold Voltage

5
 KA3S0765R/KA3S0765RF

Typical Performance Characteristics (Continued)

www.DataSheet4U.com
(These characteristic graphs are normalized at Ta = 25°C)

Fig.7 Stop Threshold Voltage Fig.8 Maximum Duty Cycle

1.15 1.15
1.1 1.1
1.05 1.05
Vth(L) 1
Vstop Dmax 1
0.95 0.95
0.9 0.9
0.85 0.85
-25 0 25 50 75 100 125 150 -25 0 25 50 75 100 125 150
Temperature [°C] Temperature [°C]

Figure 7. Stop Threshold Voltage Figure 8. Maximum Duty Cycle

Fig.9 Vcc Zener Voltage Fig.10 Shutdown Feedback Voltage

1.2 1.15
1.15 1.1
1.1
1.05 1.05
Vz 1 Vsd 1
0.95 0.95
0.9
0.85 0.9
0.8 0.85
-25 0 25 50 75 100 125 150 -25 0 25 50 75 100 125 150
Temperature [°C] Temperature [°C]

Figure 9. VCC Zener Voltage Figure 10. Shutdown Feedback Voltage

Fig.11 Shutdown Delay Current Fig.12 Over Voltage Protection

1.2 1.15
1.15
1.1
1.1
1.05 1.05
Idelay 1 Vovp 1
0.95 0.95
0.9
0.85 0.9
0.8 0.85
-25 0 25 50 75 100 125 150 -25 0 25 50 75 100 125 150
Temperature [°C] Temperature [°C]

Figure 11. Shutdown Delay Current Figure 12. Over Voltage Protection

6
 KA3S0765R/KA3S0765RF

Typical Performance Characteristics (Continued)

www.DataSheet4U.com
(These characteristic graphs are normalized at Ta = 25°C)

Fig.13 Soft Start Voltage Fig.14 Drain Source Turn-on

1.15 Resistance
1.1 2.5
1.05 2
Vss 1 1.5
0.95 ( )1
Rdson
0.9 0.5
0.85 0
-25 0 25 50 75 100 125 150 -25 0 25 50 75 100 125 150

Figure13. Soft Start Voltage Figure 14. Static Drain-Source on Resistance

7
 KA3S0765R/KA3S0765RF

Package Dimensions
www.DataSheet4U.com

TO-3P-5L

8
 KA3S0765R/KA3S0765RF

Package Dimensions (Continued)

www.DataSheet4U.com

TO-3P-5L (Forming)

9
 KA3S0765R/KA3S0765RF

Package Dimensions (Continued)

www.DataSheet4U.com

TO-3PF-5L

10
 KA3S0765R/KA3S0765RF

Package Dimensions (Continued)

www.DataSheet4U.com

TO-3PF-5L(Forming)

11
 KA3S0765R/KA3S0765RF

Ordering Information
www.DataSheet4U.com
Product Number Package Rating Operating Temperature
KA3S0765R-TU TO-3P-5L
650V, 7A -25°C to +85°C
KA3S0765R-YDTU TO-3P-5L(Forming)
KA3S0765RF-TU TO-3PF-5L
650V, 7A -25°C to +85°C
KA3S0765RF-YDTU TO-3PF-5L(Forming)
TU : Non Forming Type
YDTU : Forming Type

12
 KA3S0765R/KA3S0765RF

www.DataSheet4U.com

13
 KA3S0765R/KA3S0765RF

www.DataSheet4U.com

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, and (c) whose failure to reasonably expected to cause the failure of the life support
perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.

www.fairchildsemi.com

2/5/01 0.0m 001

Stock#DSxxxxxxxx
 2001 Fairchild Semiconductor Corporation