Scribd
Upload
91 views

SPS 820

This document provides specifications and troubleshooting information for an SPS-820 audio system. It lists output power levels for the subwoofer and different speaker channels. Impedance requirements and frequency response are also specified. Troubleshooting steps are outlined for issues like no sound, with potential causes like a faulty transformer, capacitor, or integrated circuit. Connections to equipment are diagrammed.

Uploaded by

Alexey Hlebnikov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
91 views

SPS 820

This document provides specifications and troubleshooting information for an SPS-820 audio system. It lists output power levels for the subwoofer and different speaker channels. Impedance requirements and frequency response are also specified. Troubleshooting steps are outlined for issues like no sound, with potential causes like a faulty transformer, capacitor, or integrated circuit. Connections to equipment are diagrammed.

Uploaded by

Alexey Hlebnikov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

SERVICE MANUAL SAMPLE

SPS-820
2. SPECIFICATIONS

TECHNICALSPECIFICATION:

OUTPUT POWER SUB-WOOFER 35 RMS THD 0.7%)

FRONT 15W+15W RMS THD 0.7%)

CENTER 15W RMS THD 0.7%)

SURROUND 15W+15W RMS THD 0.7%)

SUB WOOFER IMPEDANCE 8 OHM

FRONT/CENTER/SURROUND 4 OHM

FREQUENCE RESPONSE 50Hz-20KHz

SEPARATION 40dB

S/N RATIO 80dB

DIMENSION

SUB WOOFER W170*D355*H260mm

FRONT/CENTER/SURROUND W97*D135*H155mm

SERVICE MANUAL 3
4. CONNECTING TO EQUIPMENT

L. R.

L.

R.

~220V 50Hz

SERVICE MANUAL 5
5. TROUBLE SHOOTING GUIDE

TROUBLE SHOOTING AND RESOLUTION


1 No sound

check whether the vice-level I NOT


alternating voltage13v*2 of replace the
thransformer is ok or not. transformer

OK
check whether the current NOT check whether the
capacitor C3C8
transfer output voltsD.Cis ok are ok or not.
or not.

OK
judge whether JRC4558, NOT replace it
TOA7275,TDA2030A,are
ok or not

OK
NOT Replace it
Check the speakers
dried machine ok or not

BURNED OUT
check whether the power switch is all right or not. replace the it

OK
NOT check the plug,power
check whether there is 220V alternating
current of the transformer in elementary. buttonare all right or not.

3 Error Possible reason Obivating

The power plug is not exactly inserted. Insert the plug in right place
The connection of output and input is not well Connect the output and input
No sound The input format is not right cables
The volume control be settled in the minimum Adjust the volume
Rest estate

SERVICE MANUAL 5
SERVICE MANUAL 12

You might also like