Scribd
Upload
215 views1 page

ERIEZ 50 Gallon Sump Cleaner (FBSS-300A)

The document describes a 50 gallon single compartment sump cleaner unit that is portable and removes coolant, sludge, and chips from machine tool sumps while filtering the sludge from the fluid and returning filtered coolant or transporting to waste. The unit has a 3 stage motor, float switch, cleaning tool, and dimensions and specifications are provided.

Uploaded by

angelsiddharta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
215 views1 page

ERIEZ 50 Gallon Sump Cleaner (FBSS-300A)

The document describes a 50 gallon single compartment sump cleaner unit that is portable and removes coolant, sludge, and chips from machine tool sumps while filtering the sludge from the fluid and returning filtered coolant or transporting to waste. The unit has a 3 stage motor, float switch, cleaning tool, and dimensions and specifications are provided.

Uploaded by

angelsiddharta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FBSS-300A

ERIEZ

50 Gallon Sump Cleaner


90-1030G2E

The 50 gallon single compartment unit is ideal for the smaller


shop where floor space is limited. It is portable, removes the
coolant, sludge, and chips from the sump while filtering the
sludge from the fluid. It returns filtered coolant to the machine
tool sump, or transports the coolant to waste treatment for
disposal, or to an Eriez Recycling System for recycling.

F e a t u re s :
• 120-volt 3 stage motor assembly that generates
10” HG vacuum with suction rates up to 85 GPM while
being able to pick up chips, sludge, grinding swarf, etc,
and discharge pressure of 5 PSI for discharge rates of
up to 40 GPM
• Electric normally closed high level float switch to shut
motor off when unit is full
• One 3’ x 2” cleaning tool
• Heavy duty tank construction
• Push around configuration with two each 4” x 2”
swivel and rigid caster

Dimensions:
44” (1118mm) L x 22.5” (597mm) W x 51”(1295mm) H
Weight Empty: 350 pounds (159kg)
Specifications:
Available in both air venturi and electric models.
10’ Long x 2” ID suction and 1-1/2 discharge hoses.
1.6 cubic foot rectangular chip basket with
polyfiber sleeve.

Utility Requirements:
Electrical: 115 V, Single Phase, 60 Hz, 20 amp outlet
(running amp draw is 14 amps)

Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co, Erie, PA ©2018 Eriez Magnetics All Rights Reserved

World Authority in Separation Technologies


Headquarters: 2200 Asbury Road, Erie, PA 16506-1402 U.S.A.
Telephone: 814-835-6000 • Fax: 814-838-4960
www.eriez.com e-mail: [email protected] 
Manufacturing Facilities: AUSTRALIA • BRAZIL • CANADA • CHINA • INDIA • JAPAN • MEXICO • SOUTH AFRICA • UNITED KINGDOM • UNITED STATES

You might also like