Remove - Install Front Module (FM) PDF
Remove - Install Front Module (FM) PDF
05
MODEL 930, 932, 933, 934
1 Cover
W54.21-1221-06
W54.21-1222-08
Remove/install
Notes on self-locking nuts and bolts AH00.00-N-0001-01A
1 Turn off ignition
2 Compare central data memory (ZDS) prior to Only when front module (FM) (A64) is to AR54.21-W-1245-01MP
control unit replacement be replaced.
*WH58.30-Z-1049-13A
Danger! Risk of injury caused by being caught or Ensure that no one is within the tilting range of AS60.80-Z-0001-01A
pinched as cab is tilted the cab as it is being tilted. Always tilt the cab
all the way to the end position and secure with
the safety strut.
3 Tilt cab The front flap must always be opened
when tilting.
Notes on tilting the cab AH60.80-N-0003-01A
4 Remove cover (1) To do so press the tabs (arrows) towards
the cover (1) and swivel the cover forwards.
5 Remove tie straps (2) Installation: Install new cable ties.
© Daimler AG, 6/5/19, L/01/18, ar54.21-w-1245mp, Remove/install front module (FM) Page 1 of 2
MODEL 930, 932, 933, 934
6 Detach connectors on front module (FM) To avoid damaging the front module,
(A64) detach connector (X7) of the front module's
voltage supply first. To do so slide securing
clip (3) in direction of arrow, until the
connector (X7) is unlocked.
7 Remove front module (FM) (A64)
8 Install in the reverse order
9 Compare central data memory (ZDS) Only when front module (FM) (A64) was AR54.21-W-1245-02MP
following control unit replacement replaced.
*WH58.30-Z-1049-13A
© Daimler AG, 6/5/19, L/01/18, ar54.21-w-1245mp, Remove/install front module (FM) Page 2 of 2
MODEL 930, 932, 933, 934