How To Unlock Pattern Lock or Password in Android Smartphone Without Losing Data
How To Unlock Pattern Lock or Password in Android Smartphone Without Losing Data
Step 1. After downloading Aroma File Manager, place it in your memory card (SD
card). Insert the memory card into your locked android device.
Step 2. Open Stock Recovery Mode with reboot your android device and pressing
Power Key and Volume up key simultaneously. Different phones may be have
different methods to open stock recovery mode so if you face any problem Google it.
Step 3. After entering into recovery mode use Volume+ and Volume- buttons to scroll
up and down. For select use middle button.
Step 4. From there click on “Install Zip from SD Card” and give a path to install
“Aroma File Manager” from SD card.
Step 6. From the Aroma File Manager navigate to settings >> go to bottom and click
on“Automount all devices on start” and then exit.
Step 8. After this you will get “Aroma File Manager” opened again.
Step 9. Now navigate to Data Folder >> System Folder and find >>
“gesture.key”or“password.key” for pattern lock or password lock respectively.
Step 10. Delete that any one file and then exit aroma file manager and reboot your
android device. After rebooting you will notice that password or pattern lock not
removed. But don’t worry draw any pattern and you will open your android device
but remember or note that pattern.
2. So the other requirement is USB Debugging should be enabled before your android
device is locked.
3. The process will not be helpful if you doesn’t have specific and compatible drivers
for your phone. So you should be very careful While installing your device
compatible drivers.
Step 1. Connect your locked android phone with PC/Laptop via USB.
Step 2. Open folder where you installed Android SDK Tools Users >> App Data >>
Local >> Android >> Android-SDK >> Platform-Tools and then click on blank space
hold shift and click right mouse button and select “open command window here”.
Step 3. It will open you command window now you have to put some commands in
the command window:-
adb devices
Now put these commands:-
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name=’lock_pattern_autolock’;
update system set value=0 where name=’lockscreen.lockedoutpermanently’;
.quit
Step 4. Once you done you have rebooted your android device. Now its all done.
After rebooting your device you will see the pattern lock disabled. So in this method
USB Debugging should be enabled before locked and it is must. But If it is not enable
then you cannot proceed further steps.
Method 3rd:- Unlock Pattern With Factory Settings (Data Will Lost)
If you don’t have a PC or if USB Debugging is not enabled then follow the below
steps
Step 2. Now, boot your Android device into “Recovery Mode” using specific keys by
holding power key and volume up key simultaneously.
Step 3. After opening Recovery Mode
Step 5. All Done ! Now, your device will start from the scratch.