0% found this document useful (0 votes)
265 views

CS601 Final MCQs PDF

This document contains 30 multiple choice questions from final exams for data communication courses. The questions cover topics like data encoding, transmission media, networking protocols, and the layers of the OSI model. Specifically, they assess knowledge of concepts like NRZ encoding, ARQ protocols, modem speeds, cable types, wireless propagation, multiplexing, and the responsibilities of different network layers.

Uploaded by

Sumaira Naz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
265 views

CS601 Final MCQs PDF

This document contains 30 multiple choice questions from final exams for data communication courses. The questions cover topics like data encoding, transmission media, networking protocols, and the layers of the OSI model. Specifically, they assess knowledge of concepts like NRZ encoding, ARQ protocols, modem speeds, cable types, wireless propagation, multiplexing, and the responsibilities of different network layers.

Uploaded by

Sumaira Naz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 54

CS601-Data Communication

Latest Solved MCQs from Final term Papers May 26,2011

Lectures 23-45 Mc100401285 [email protected] Moaaz Siddiq Latest Mcqs

FINAL TERM EXAMINATION


Spring 2011
Question No: 1 ( Marks: 1 ) - Please choose
The inversion of the level at 1 bit is called as __________
► NRZ-L
► NRZ-I Page 73
► RZ

Question No: 2 ( Marks: 1 ) - Please choose


In selective-reject ARQ, only the specific damaged or lost frame is_____________.
► Retransmitted (Page 200)
► Forwarded
► Selected
► Rejected

Question No: 3 ( Marks: 1 ) - Please choose


YMODEM has _________Byte of data unit.
► 1024 Page 205
► 256
► 128
► 512

Question No: 4 ( Marks: 1 ) - Please choose


Which of the following sublyer, resolves the contention for the shared media
► MAC (Page 219)
► LLC
► Physical

Question No: 5 ( Marks: 1 ) - Please choose


Like 10 Base 5, 10 Base 2 is a _________ topology LAN
► Ring
► Mesh
► Star
► Bus (Page 227)
Question No: 6 ( Marks: 1 ) - Please choose
At the CRC generator, __________ added to the data unit after the division process
► 0s are (Page 176)
► 1s are
► The polynomial
► The CRC remainder is

Question No: 7 ( Marks: 1 ) - Please choose


Flow control is needed to prevent ___________.
► Bit errors
► Overflow of the sender buffer
► Overflow of the receiver buffer (Page 46)
► Collision between sender and receiver

Question No: 8 ( Marks: 1 ) - Please choose


In Y-MODEM Multiple files can be sent simultaneously
► True (Page 205)
► False

Question No: 9 ( Marks: 1 ) - Please choose


In 56K Modems Max Uploading speed is ______ bytes and downloading speed is
______ byte.
Ø 40K, 56K
Ø 33.6K, 56K (Page 117)
Ø 56K, 33.6K
Ø None of given

Question No: 10 ( Marks: 1 ) - Please choose


If db is amplified then attenuation is ------------------
Ø Positive (Page 142)
Ø Negative
Ø Zero
Ø None of the above

Question No: 11 ( Marks: 1 ) - Please choose


Amplifiers are used to __________the signal to heat.
Ø Amplify (Page 142)
Ø Rectify
Ø Testify
Ø Nullify

Question No: 12 ( Marks: 1 ) - Please choose


_________requires the maximum number of I/O ports.
Ø Bus
Ø Star
Ø Mesh (Page 29)
Ø Ring

Question No: 13 ( Marks: 1 ) - Please choose


There are ________ basic categories of multiplexing.
Ø 3 (Page 148)
Ø 4
Ø 2
Ø 5
Question No: 14 ( Marks: 1 ) - Please choose
In _____________ transmission, bits are transmitted over a single wire, one at a time.
Ø Asynchronous serial
Ø Synchronous serial
Ø Parallel (Page 98)
Ø Asynchronous & Synchronous serial

Question No: 15 ( Marks: 1 ) - Please choose


In_____________ transmission, bits are transmitted over their own wires
Ø Asynchronous serial
Ø Synchronous serial
Ø Parallel
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter4/mixed_quiz.html
Ø Asynchronous & Synchronous serial

Question No: 16 ( Marks: 1 ) - Please choose


EIA 232 allows for a maximum bit rate of __________Kbps.
Ø 40
Ø 30
Ø 20 (Page 104)
Ø 10

Question No: 17 ( Marks: 1 ) - Please choose


In CRC the quotient at the sender _____________
Ø Becomes the dividend at the receiver
Ø Becomes the divisor at the receiver
Ø Is discarded
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html
Ø Is the remainder

Question No: 18 ( Marks: 1 ) - Please choose


In line discipline after the data transmission, the sending system finishes with an
_____________ frame
Ø EOT (Page 189)
Ø EKT
Ø ENT
Ø ESP
FINALTERM EXAMINATION
Spring 2010

Question No: 1 ( Marks: 1 ) - Please choose one


Encryption and encoding are the same terms.

► True
► False (Page 52)

Question No: 2 ( Marks: 1 ) - Please choose one


Traditional modems are wide spread now to a data rate of __________.

► 56 Kbps (Page 115)


► 72 Kbps
► 42 Kbps
► 96 Kbps

Question No: 3 ( Marks: 1 ) - Please choose one


Bi phase encoding is a type of bipolar encoding in which we use two voltage levels.

► True
► False (Page 73)

Question No: 4 ( Marks: 1 ) - Please choose one


The _______________ layer changes bits into electromagnetic signals.

► physical http://www.ee.surrey.ac.uk/Projects/CAL/networks/Physical_Layer.htm
► data link
► transport
► none of given

Question No: 5 ( Marks: 1 ) - Please choose one


Which is not an element of protocol?

► Semantics
► Timing
► Communication service module (Page 19)

Question No: 6 ( Marks: 1 ) - Please choose one


A telephone network is an example of a __________ network.

► Packet-switched
► Circuit-switched (Page 38)
► Message-switched
► none of the given

Question No: 7 ( Marks: 1 ) - Please choose one


The bit rate always equals the baud rate in which type of signal?

► FSK (Page 86)


► QAM
► 4-PSK
► PSK

Question No: 8 ( Marks: 1 ) - Please choose one


Secondary hub in a tree must be a passive hub.

► True
► False (Page 31)

Question No: 9 ( Marks: 1 ) - Please choose one


In case of uploading at the switching station, data is converted to digital signal using ___________.

► TCP
► PCM (Page 116)
► ICP
► TDM

Question No: 10 ( Marks: 1 ) - Please choose one


Category 5 UTP cable is used for data transmission of upto__________.

► 100 Mbps (Page 123)


► 200 Mbps
► 250 Mbps
► 400 Mbps

Question No: 11 ( Marks: 1 ) - Please choose one


Which of the following primarily uses guided media?

► Cellular telephone system


► Local telephone system (Page 120)
► Satellite communications
► Radio broadcasting

Question No: 12 ( Marks: 1 ) - Please choose one


Ultra high-frequency waves always use __________ propagation.

► Ground
► Sky
► Line of Sight (Page 136)
► Space

Question No: 13 ( Marks: 1 ) - Please choose one


Distortion occurs in a ___________ signal.

► Rectified
► Composite (Page 141)
► Amplified
► none of the given

Question No: 14 ( Marks: 1 ) - Please choose one


Which of the following are not used to measure the performance of TX Media.

► Throughput
► Propagation Speed
► Propagation Time
► none of the given (Page 144)

Question No: 15 ( Marks: 1 ) - Please choose one


A portion of the path that carries TX b/w a given pair of devices is known as __________.

► Node
► Bridge
► Channel (Page 147)
► Gateway

Question No: 16 ( Marks: 1 ) - Please choose one


_________ takes data from one high speed line and breaks it into portions.

► Multiplexing
► Inverse multiplexing (Page 158)
► Inverse subtraction
► Inverse addition

Question No: 17 ( Marks: 1 ) - Please choose one


The _________ layer is the layer closest to the transmission medium.

► physical
► data link
► network
► transport
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter2/multiple_choice_quiz.html
Question No: 18 ( Marks: 1 ) - Please choose one
In primary-secondary communication ______________ is always the initiator of a session

► Primary (Page 189)


► Secondary
► Sender
► Receiver

Question No: 19 ( Marks: 1 ) - Please choose one


YMODEM has _________Byte of data unit.

► 1024 (Page 205)


► 256
► 128
► 512

Question No: 20 ( Marks: 1 ) - Please choose one


____________ coordinates the amount of data that can be sent before receiving acknowledgment

► flow control (Page 186)


► error control
► data control

Question No: 21 ( Marks: 1 ) - Please choose one


If the ASCII character H is sent and the character I is received, what type of error is this?

► Single-bit (Page 169)


► Multiple-bit
► Burst
► Recoverable

Question No: 22 ( Marks: 1 ) - Please choose one


In __________ ARQ, if a NAK is received, only the specific damaged or lost frame is retransmitted.

► Stop-and-wait
► Go-Back-N
► Selective reject (Page 200)
► Stop-and-wait & Go-back-N

Question No: 23 ( Marks: 1 ) - Please choose one


Data link protocols can be divided into ______________ sub-groups.

► two (Page 202)


► three
► four
► five
Question No: 24 ( Marks: 1 ) - Please choose one
If odd parity is used for ASCII error detection, the number of 0s per 8-bit symbol is _________

► Even
► Odd (Page 173)
► Indeterminate
► 42

Question No: 25 ( Marks: 1 ) - Please choose one


In Y-MODEM Multiple files can be sent simultaneously

► True (Page 205)


► False

Question No: 26 ( Marks: 1 ) - Please choose one


The PDU has no flag fields, no CRC, and no station address

► TRUE (Page 220)


► FALSE

Question No: 27 ( Marks: 1 ) - Please choose one


Check sum method is used for _______________ layers.

► Physical
► Application
► Transport
► Data link http://www.cse.iitk.ac.in/users/dheeraj/cs425/lec09.html

Question No: 28 ( Marks: 1 ) - Please choose one


Repeater is an amplifier, not a regenerator.

► True
► False (Page 240)

Question No: 29 ( Marks: 1 ) - Please choose one


RARP stands for Reverse Address Resolution Protocol.
► True (Page 244)
► False

Question No: 30 ( Marks: 1 ) - Please choose one


The BNC-T connector is a T-shaped device with _______ ports

► Three (Page 228)


► Two
► Four
► Five
FINALTERM EXAMINATION
Spring 2010

Question No: 1 ( Marks: 1 ) - Please choose one


When data are transmitted from device A to device B, the header from A’s layer 4 is read by B’s
__________ layer.

► physical
► transport
► application
► none of the given
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter2/multiple_choice_quiz.html

Question No: 2 ( Marks: 1 ) - Please choose one


A periodic signal completes one cycle in 0.001 s. What is the frequency?

► 1 Hz
► 100 Hz
► 1 KHz (Page 61)
► 1 MHz

Question No: 3 ( Marks: 1 ) - Please choose one


Zero crossing bandwidth is also called as equivalent noise bandwidth.

► True
► False (Page 67)

Question No: 4 ( Marks: 1 ) - Please choose one


Amplitude in ASK is more resistive to EMI and Noise.

► True
► False (Page 87)

Question No: 5 ( Marks: 1 ) - Please choose one


If FCC regulations are followed, the carrier frequencies of adjacent AM radio stations are ____________
apart.

► 5 KHz
► 10 KHz (Page 95)
► 200 KHz
► 530 KHz

Question No: 6 ( Marks: 1 ) - Please choose one


There are _________________ types of serial transmission:
►1
► 2 (Page 99)
►3
►4

Question No: 7 ( Marks: 1 ) - Please choose one


Synchronous transmission has _____________.

► a start bit
► a stop bit
► gaps between bytes
► none of the given (page 99)

Question No: 8 ( Marks: 1 ) - Please choose one


Which of the following is an example of ITU-T modem standards?

► T-series
► X-series
► N-series
► V-series (Page 114)

Question No: 9 ( Marks: 1 ) - Please choose one


The maximum data rate in the uploading direction is still ____________.

► 26.6 Kbps
► 33.6 Kbps (Page 117)
► 36.6 Kbps
► 46.6 Kbps

Question No: 10 ( Marks: 1 ) - Please choose one


Category 5 UTP cable is used for data transmission of upto__________.

► 100 Mbps (Page 123)


► 200 Mbps
► 250 Mbps
► 400 Mbps

Question No: 11 ( Marks: 1 ) - Please choose one


All of popular Fiber optic connectors are ___________ shaped.

► Conical
► Barrel (Page 131)
► Circular
► Rectangular
Question No: 12 ( Marks: 1 ) - Please choose one
The VLF and LF bands use _________ propagation for communications.

► Ground
► Sky
► Line of sight (Page 134)
► Space

Question No: 13 ( Marks: 1 ) - Please choose one


Multiplexing is the set of techniques that allows simultaneous TX of multiple signals across ___________
data link

► Single (Page 147)


► Multi
► Single and Multi
► none of the given

Question No: 14 ( Marks: 1 ) - Please choose one


Need for Addressing makes Asynchronous TDM inefficient for bit or byte ___________.

► Interleaving (Page 158)


► Addition
► Subtraction
► None of the given

Question No: 15 ( Marks: 1 ) - Please choose one


_________ takes data from one high speed line and breaks it into portions.

► Multiplexing
► Inverse multiplexing (Page 158)
► Inverse subtraction
► Inverse addition

Question No: 16 ( Marks: 1 ) - Please choose one


A traditional telephone line has a bandwidth of __________.

► 3000Hz (Page 111)


► 4000 Hz
► 2000 MHz
► 4000 MHz

Question No: 17 ( Marks: 1 ) – Please choose one


If the ASCII character H is sent and the character I is received, what type of error is this?

► Single-bit (Page 169)


► Multiple-bit
► Burst
► Recoverable

Question No: 18 ( Marks: 1 ) - Please choose one


At the CRC generator, __________ added to the data unit after the division process

► 0s are
► 1s are
► The polynomial
► The CRC remainder is
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 19 ( Marks: 1 ) - Please choose one


Error control in the data link layer is based on ________________

► automatic repeat request (Page 196)


► automatic repeat acknowledgment
► automatic send acknowledgment

Question No: 20 ( Marks: 1 ) - Please choose one


In line discipline the initiator first transmits a frame called an ________

► Enquiry (Page 189)


► Acknowledgment
► NAK
► Request

Question No: 21 ( Marks: 1 ) - Please choose one


Primary device uses ____________ to receive transmission from the secondary devices.

► ACK
► ENQ
► POLL (Page 191)

Question No: 22 ( Marks: 1 ) - Please choose one


Flow control is needed to prevent ___________.

► Bit errors
► Overflow of the sender buffer
► Overflow of the receiver buffer (Page 46)
► Collision between sender and receiver

Question No: 23 ( Marks: 1 ) - Please choose one


For stop-and-wait ARQ, for N data packets sent, ___________ acknowledgments are needed.

►N
► 2N
► N-1
► N+1
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter11/mixed_quiz.html

Question No: 24 ( Marks: 1 ) - Please choose one


In Y-MODEM Multiple files can be sent simultaneously

► True (Page 205)


► False

Question No: 25 ( Marks: 1 ) - Please choose one


HDLC is an acronym for ______________.

► High-duplex line communication


► High-level data link control (Page 210)
► Half-duplex digital link combination
► Host double-level circuit

Question No: 26 ( Marks: 1 ) - Please choose one


Token Bus has no commercial application in data communications

► True (Page 232)


► False

Question No: 27 ( Marks: 1 ) - Please choose one


The BNC-T connector is a T-shaped device with _______ ports

► Three (Page 228)


► Two
► Four
► Five

Question No: 28 ( Marks: 1 ) - Please choose one


Each station in the Token Ring regenerates the frame.

► True (Page 234)


► False

Question No: 29 ( Marks: 1 ) - Please choose one


Repeater works on __________ layer.

► Data Link
► Physical
► Network (224)
► Application
Question No: 30 ( Marks: 1 ) - Please choose one
Trunks are transmission media such as _________ that handle the telephone to the nearest end office.

► Satellite links
► Twisted-pair & Fiber-optic
► Twisted-pair
► Fiber-optic
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter8/mixed_quiz.html

Spring 2010
CS601- Data Communication

Question No: 1 ( Marks: 1 ) - Please choose one


__________representation of links that connect nodes is called as physical topology.

► geometrical
► logical
► physical (page 44)

Question No: 2 ( Marks: 1 ) – Please choose one


The internet model consists of _________ layers.

► three
► two
► five
► seven
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter2/multiple_choice_quiz.html

Question No: 3 ( Marks: 1 ) – Please choose one


Encryption and encoding are the same terms.

► True
► False (Page 52)

Question No: 4 ( Marks: 1 ) - Please choose one


The amplitude of a digital signal depends upon the________ to represent a bit.

► phase
► voltage (Page 59)
► wavelength

Question No: 5 ( Marks: 1 ) - Please choose one


The inversion of the level at 1 bit is called as __________

► NRZ-L
► NRZ-I (Page 73)
► RZ

Question No: 6 ( Marks: 1 ) - Please choose one


Modulation of an analog signal can be accomplished through changing the ___________ of the carrier
signal.

► amplitude
► frequency
► phase
► all of the given

Question No: 7 ( Marks: 1 ) - Please choose one


If FCC regulations are followed, the carrier frequencies of adjacent AM radio stations are ____________
apart.

► 5 KHz
► 10 KHz (Page 95)
► 200 KHz
► 530 KHz

Question No: 8 ( Marks: 1 ) - Please choose one


Category 5 UTP cable is used for data transmission of upto__________.

► 100 Mbps (Page 123)


► 200 Mbps
► 250 Mbps
► 400 Mbps

Question No: 9 ( Marks: 1 ) - Please choose one


The RG number gives us information about ________.

► Twisted pairs
► Coaxial cables (Page 125)
► Optical fibers
► all of the given

Question No: 10 ( Marks: 1 ) - Please choose one


The inner core of an optical fiber is __________ in composition.

► Glass plastic (Page 130)


► Copper
► Bimetallic
► Liquid
Question No: 11 ( Marks: 1 ) - Please choose one
All of popular Fiber optic connectors are ___________ shaped.

► Conical
► Barrel (Page 131)
► Circular
► Rectangular

Question No: 12 ( Marks: 1 ) - Please choose one


The VLF and LF bands use _________ propagation for communications.

► Ground
► Sky
► Line of sight (Page 134)
► Space

Question No: 13 ( Marks: 1 ) - Please choose one


Multiplexing is the set of techniques that allows simultaneous TX of multiple signals across ___________
data link

► Single (Page 147)


► Multi
► Single and Multi
► none of the given

Question No: 14 ( Marks: 1 ) - Please choose one


A portion of the path that carries TX b/w a given pair of devices is known as __________.

► Node
► Bridge
► Channel (Page 147)
► Gateway

Question No: 15 ( Marks: 1 ) - Please choose one


Which error detection method involves polynomials?

► Checksum
► Two-dimensional parity check
► CRC (Page 177)
► Simple parity check

Question No: 16 ( Marks: 1 ) - Please choose one


If the ASCII character G is sent and the character D is received, what type of error is this?

► Single-bit
► Multiple-bit
► Burst
► Recoverable
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 17 ( Marks: 1 ) - Please choose one


Which error detection method involves the use of parity bits?

► Simple parity check & two dimensional parity check


► CRC
► Two-dimensional parity check
► Simple parity check
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 18 ( Marks: 1 ) - Please choose one


Which error detection method can detect a single-bit error?

► Simple parity check


► Two-dimensional parity check
► CRC
► All of the given
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 19 ( Marks: 1 ) - Please choose one


The Hamming code is a method of __________

► Error detection
► Error correction (Page 181)
► Error encapsulation
► Error detection & Error encapsulation

Question No: 20 ( Marks: 1 ) - Please choose one


Sliding window requires that data frames be transmitted _______________

► Sequentially (Page 199)


► Frequently
► Synchronously
► Asynchronously

Question No: 21 ( Marks: 1 ) - Please choose one


In selective-reject ARQ, only the specific damaged or lost frame is_____________.

► Retransmitted (Page 200)


► Forwarded
► Selected
► Rejected
Question No: 22 ( Marks: 1 ) - Please choose one
Which of the following sub layer, resolves the contention for the shared media

► MAC (Page 219)


► LLC
► Physical

Question No: 23 ( Marks: 1 ) - Please choose one


The PDU has no flag fields, no CRC, and no station address

► TRUE (Page 220)


► FALSE

Question No: 24 ( Marks: 1 ) - Please choose one


IEEE divides the base band category into ______ standards.

► 5 (Page 222)
►4
►3
►6

Question No: 25 ( Marks: 1 ) - Please choose one


Like 10 Base 5, 10 Base 2 is a _________ topology LAN

► Ring
► Mesh
► Star
► Bus (Page 227)

Question No: 26 ( Marks: 1 ) - Please choose one


Check sum method is used for _______________ layers.

► Physical
► Application
► Transport
► Data link http://www.cse.iitk.ac.in/users/dheeraj/cs425/lec09.html

Question No: 27 ( Marks: 1 ) - Please choose one


Repeater works on __________ layer.

► Data Link
► Physical
► Network (Page 224)
► Application
Question No: 28 ( Marks: 1 ) - Please choose one
Trunks are transmission media such as _________ that handle the telephone to the nearest end office.

► Satellite links
► Twisted-pair & Fiber-optic
► Twisted-pair
► Fiber-optic
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter8/mixed_quiz.html

Question No: 29 ( Marks: 1 ) - Please choose one


Which of the following ___________ uses a series of filters to decompose multiplexed signal into its
constituent signals?

► MUX
► DEMUX (Page 150)
► Switch
► Bridge

Question No: 30 ( Marks: 1 ) - Please choose one


In Fast Ethernet, data rate can be increased by _______________ collisions.

► Increasing
► Decreasing (Page 230)
► Keeping Constant
► None of the given

FINALTERM EXAMINATION
Spring 2009

Question No: 1 ( Marks: 1 ) - Please choose one


Which is not an element of protocol
► semantics
► timing
► communication service module (Page 19)

Question No: 2 ( Marks: 1 ) - Please choose one


Layers 5, 6 and 7 also called as network support layers.

► True
► False (Page 42)

Question No: 3 ( Marks: 1 ) - Please choose one


Fourier transform tells us that any digital signal can be decomposed into infinite number of periodic signals

► True
► False (Page 42)
Question No: 4 ( Marks: 1 ) - Please choose one
Time domain plot show changes in signal phase with respect to time.

► True
► False (Page 63)

Question No: 5 ( Marks: 1 ) - Please choose one


Analog to digital conversion is also termed as modulating an analog signal.

► True
► False (Page 70)

Question No: 6 ( Marks: 1 ) - Please choose one


DC component is also termed as Direct current component or a component with non-zero frequency.

► False (Page 72)


► True

Question No: 7 ( Marks: 1 ) - Please choose one


Manchester is a type of ____________encoding.

► biphase (Page 75)


► polar
► biphase & polar
► none of the given

Question No: 8 ( Marks: 1 ) - Please choose one


The inversion of the level at 1 bit is called as __________

► NRZ-L
► NRZ-I (Page 73)
► RZ

Question No: 9 ( Marks: 1 ) - Please choose one


PCM is the first process of PAM.

► True
► False (Page 80)

Question No: 10 ( Marks: 1 ) - Please choose one


In 4PSK each phase change represents ______bits.

►3
►6
►2 (Page 91)
►4

Question No: 11 ( Marks: 1 ) - Please choose one


In RS 422 Balanced mode two lines carry ________ signals which are not identical to each other.
► Same (Page 109)
► different
► digital
► analog

Question No: 12 ( Marks: 1 ) - Please choose one


A ______________ converts an analog signal into a digital signal.

► Demodulator (Page 110)


► Modulator
► Digital-to-analog converter

Question No: 13 ( Marks: 1 ) - Please choose one


Which of the following is an example of ITU-T modem standards:

► T-series
► X-series
► N-series
► V-series (Page 114)

Question No: 14 ( Marks: 1 ) - Please choose one


The maximum data rate in the uploading direction is still ____________.

► 26.6 Kbps
► 33.6 Kbps (Page 117)
► 36.6 Kbps
► 46.6 Kbps

Question No: 15 ( Marks: 1 ) - Please choose one


Which of the following primarily uses guided media

► Cellular telephone system


► Local telephone system (Page 120)
► Satellite communication
► Radio broadcasting

Question No: 16 ( Marks: 1 ) - Please choose one


When a beam of light travels through media of two different densities, if the angle of incidence is greater than
the critical angle, ____________occurs.

► Reflection
► Refraction (Page 127)
► Incidence
► Criticism

Question No: 17 ( Marks: 1 ) - Please choose one


When we talk about unguided media, usually we are referring to _________.

► Metallic wires
► Nonmetallic wires
► The air (Page 132)
► Water

Question No: 18 ( Marks: 1 ) - Please choose one


Optical fibers are defined by the ratio of the ___________ of their core to the diameter of their cladding.

► Diameter (Page 130)


► Radius
► Length
► Width
Question No: 19 ( Marks: 1 ) - Please choose one
All of popular Fiber optic connectors are ___________ shaped.

► Conical
► Barrel (Page 131)
► Circular
► Rectangular

Question No: 20 ( Marks: 1 ) - Please choose one


Radio wave transmission utilizes ___________ different types of propagation.

► Four
► Three
► Two
► Five (Page 132)

Question No: 21 ( Marks: 1 ) - Please choose one


dB is ____________ if a signal is amplified.

► Negative
► Positive (Page 142)
► Null
► Zero

Question No: 22 (Marks: 1) - Please choose one


A prism can deflect the light depending upon the angle of ____________ and the frequency.

► Deviation
► Incident (Page 151)
► Refraction (Page 127)
► Reflection

Question No: 23 ( Marks: 1 ) - Please choose one


Asynchronous TDM is efficient only when the size of the time slot is kept relatively _______________

► Large (Page 158)


► Small
► Medium
► None of the given
Question No: 24 ( Marks: 1 ) - Please choose one
The local loop has ___________ cable that connects the subscriber telephone to the nearest end office.

► Twisted-pair (Page 160)


► Coaxial
► Fiber-optic
► None of the given

Question No: 25 ( Marks: 1 ) - Please choose one


Data from a computer are ____________; the local loop handles _________ signals.

► Analog; analog
► Analog; digital
► Digital; digital
► Digital; analog
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter9/multiple_choice_quiz.html

Question No: 26 ( Marks: 1 ) - Please choose one


Which error detection method uses ones complement arithmetic?

► Simple parity check


► Two-dimensional parity check
► CRC
► Checksum (Page 179)

Question No: 27 ( Marks: 1 ) - Please choose one


Flow control is needed to prevent ____________

► Bit errors
► Overflow of the sender buffer
► Overflow of the receiver buffer (Page 46)
► Collision between sender and receiver

Question No: 28 ( Marks: 1 ) - Please choose one


____________ coordinates the amount of data that can be sent before receiving acknowledgment

► flow control (Page 186)


► error control
► data control

Question No: 29 ( Marks: 1 ) - Please choose one


Error control is both error _________ and error ___________

► detection; correction (Page 186)


► detection; deletion
► detection; avoidance
► detection; forwarding

Question No: 30 ( Marks: 1 ) - Please choose one


Addressing is not needed in _______________ configuration.
► Point to Point (Page 190)
► Multipoint
► Point to point and multipoint

Question No: 31 ( Marks: 1 ) - Please choose one


In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence number?

► 0 to 63
► 0 to 64
► 1 to 63
► 1 to 64
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter11/multiple_choice_quiz.html

Question No: 32 ( Marks: 1 ) - Please choose one


A timer is set when ___________ is sent out.

► A data frame
► An ACK (Page 197)
► A NAK

Question No: 33 ( Marks: 1 ) - Please choose one


Sliding window requires that data frames be transmitted _______________

► Sequentially (Page 199)


► Frequently
► Synchronously
► Asynchronously

Question No: 34 ( Marks: 1 ) - Please choose one


In Y-MODEM Multiple files can be sent simultaneously

► True (Page 205)


► False

Question No: 35 ( Marks: 1 ) - Please choose one


BLAST stands for :

► Blocked asynchronous transmission (Page 205)


► Blocked synchronous transmission
► Barrel asynchronous transmission
► Below asynchronous transmission

Question No: 36 ( Marks: 1 ) - Please choose one


HDLC is an acronym for ______________.

► High-duplex line communication


► High-level data link control (Page 210)
► Half-duplex digital link combination
► Host double-level circuit
Question No: 37 ( Marks: 1 ) – Please choose one
The HDLC ___________ field defines the beginning and end of a frame.

► Flag (Page 214)


► Address
► Control
► FCS

Question No: 38 ( Marks: 1 ) – Please choose one


_________ is the access protocol used by traditional Ethernet.

► CSMA/CD (Page 222)


► CSMA/CA
► Token Ring
► CSMA

Question No: 39 ( Marks: 1 ) – Please choose one


Bridges can divide a large ________ into smaller segments

► Network (Page 241)


► Packet
► Frame
► Address

Question No: 40 ( Marks: 1 ) – Please choose one


Like VRC, LRC and CRC, Checksum is also based on _______________.

► Redundancy (Page 179)


► Decimal Division
► Encryption
► Encoding

FINALTERM EXAMINATION
Fall 2009

Question No: 1 ( Marks: 1 ) – Please choose one


The information to be communicated in a data communications system is the

► Medium
► Protocol
► Message (Page 7)
► Transmission

Question No: 2 ( Marks: 1 ) – Please choose one


A set of devices connected by communication links is called networking

► True (Page 12)


► False
Question No: 3 ( Marks: 1 ) – Please choose one
Internet with small “i” specifies the world wide Network the actual internet.

► True
► False (Page 39)

Question No: 4 ( Marks: 1 ) – Please choose one


Data chunk at data link layer is called________

► frame
► packet (Page 38)
► datagram

Question No: 5 ( Marks: 1 ) – Please choose one


Data synchronization is a function related with ___________

► session layer (Page 51)


► presentation layer
► transport

Question No: 6 ( Marks: 1 ) – Please choose one


When data are transmitted from device A to device B, the header from A’s layer 4 is read by B’s
__________ layer.

► physical
► transport
► application
► none of the given
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter2/multiple_choice_quiz.html

Question No: 7 ( Marks: 1 ) – Please choose one


Data must be converted into__________ before transmission.

► signal (Page 56 and 84)


► wave
► electric pulse

Question No: 8 ( Marks: 1 ) – Please choose one


PCM is the first process of PAM.

► True
► False (Page 80)
Question No: 9 ( Marks: 1 ) – Please choose one
In _____________ transmission, bits are transmitted over a single wire, one at a time.
► Asynchronous serial
► Synchronous serial
► Parallel (Page 98)
► Asynchronous & Synchronous serial

Question No: 10 ( Marks: 1 ) – Please choose one


EIA 232 allows for a maximum bit rate of __________Kbps.

► 40
► 30
► 20 (Page 104)
► 10

Question No: 11 ( Marks: 1 ) – Please choose one


When a beam of light travels through media of two different densities, if the angle of incidence is greater
than the critical angle, ____________occurs.

► Reflection
► Refraction (Page 127)
► Incidence
► Criticism

Question No: 12 ( Marks: 1 ) – Please choose one


A parabolic dish antenna is a(n) ______________ antenna.

► Omnidirectional
► Bidirectional
► Unidirectional (Page 138)
► Horn

Question No: 13 ( Marks: 1 ) – Please choose one


Ultra high-frequency waves always use __________ propagation.

► Ground
► Sky
► Line of Sight (Page 136)
► Space

Question No: 14 ( Marks: 1 ) – Please choose one


Middle frequency waves having range 300 KHz-3 MHz always use __________ propagation.

► Ground
► Sky
► Line of Sight
► Space
http://www.scribd.com/doc/22810820/Data-Communication-and-Networking Page 8 of this book.
Question No: 15 ( Marks: 1 ) – Please choose one
DB is ____________ if a signal is attenuated.

► Negative (Page 142)


► Positive
► Null
► Zero

Question No: 16 ( Marks: 1 ) – Please choose one


Which multiplexing technique involves signals composed of light beams?

► FDM
► TDM
► WDM (Page 150)
► none of the given

Question No: 17 ( Marks: 1 ) – Please choose one


Multiplexing has long been used as an essential tool in the ____________.

► Electronic industry
► Telephone industry (Page 159)
► Space science
► VLAN
Question No: 18 ( Marks: 1 ) – Please choose one
A telephone network is an example of a __________ network.

► Packet-switched
► Circuit-switched (Page 38)
► Message-switched
► none of the given

Question No: 19 ( Marks: 1 ) – Please choose one


The local loop has ___________ cable that connects the subscriber telephone to the nearest end office.

► Twisted-pair (Page 160)


► Coaxial
► Fiber-optic
► None of the given

Question No: 20 ( Marks: 1 ) – Please choose one


Which error detection method involves polynomials?

► Checksum
► Two-dimensional parity check
► CRC (Page 177)
► Simple parity check
Question No: 21 ( Marks: 1 ) – Please choose one
In CRC there is no error if the remainder at the receiver is ____________

► Equal to the remainder at the sender


► Zero (Page 176)
► Nonzero
► The quotient at the sender

Question No: 22 ( Marks: 1 ) – Please choose one


In CRC the quotient at the sender _____________

► Becomes the dividend at the receiver


► Becomes the divisor at the receiver
► is discarded
► is the remainder
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 23 ( Marks: 1 ) – Please choose one


Which error detection method can detect a bust error?

► The parity check


► Two-dimensional parity check
► CRC
► Two-dimensional parity check and CRC
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 24 ( Marks: 1 ) – Please choose one


At the CRC checker, ________ means that the data unit is damaged

► A string of 0s
► A string of 1s
► A string of alternating 1s and 0s
► A nonzero remainder
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 25 ( Marks: 1 ) – Please choose one


Error control is both error _________ and error ___________

► detection; correction (Page 186)


► detection; deletion
► detection; avoidance
► detection; forwarding

Question No: 26 ( Marks: 1 ) – Please choose one


In line discipline the initiator first transmits a frame called an ________
► Enquiry (Page 189)
► Acknowledgment
► NAK
► Request

Question No: 27 ( Marks: 1 ) – Please choose one


In line discipline after the data transmission, the sending system finishes with an _____________ frame

► EOT (Page 189)


► EKT
► ENT
► ESP

Question No: 28 ( Marks: 1 ) – Please choose one


In primary-secondary communication ______________ is always the initiator of a session

► Primary (Page 189)


► Secondary
► Sender
► Receiver

Question No: 29 ( Marks: 1 ) – Please choose one


Primary device uses ____________ to receive transmission from the secondary devices.

► ACK
► ENQ
► POLL (Page 191)

Question No: 30 ( Marks: 1 ) – Please choose one


In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence number?

► 0 to 63
► 0 to 64
► 1 to 63
► 1 to 64
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter11/multiple_choice_quiz.html

Question No: 31 ( Marks: 1 ) – Please choose one


Sliding window requires that data frames be transmitted _______________

► Sequentially (Page 199)


► Frequently
► Synchronously
► Asynchronously

Question No: 32 ( Marks: 1 ) – Please choose one


Data link protocols can be divided into ______________ sub-groups.

► two (Page 202)


► three
► four
► five

Question No: 33 ( Marks: 1 ) – Please choose one


XMODEM is a ______________ protocol designed for telephone-line communication b/w PCs.

► file transfer (Page 203)


► hardware
► software
► application exchange

Question No: 34 ( Marks: 1 ) – Please choose one


In Y-MODEM Multiple files can be sent simultaneously

► True (Page 205)


► False

Question No: 35 ( Marks: 1 ) – Please choose one


Which of the following combines features of the other two?

► ZMODEM (Page 205)


► YMODEM
► XMODEM
► None of given

Question No: 36 ( Marks: 1 ) – Please choose one


BLAST stands for :

► Blocked asynchronous transmission (Page 205)


► Blocked synchronous transmission
► Barrel asynchronous transmission
► Below asynchronous transmission

Question No: 37 ( Marks: 1 ) – Please choose one


Which one of the following uses full duplex operation with sliding window flow control.

► BLAST (Page 205)


► XMODEM
► YMODEM
► ZMODEM
Question No: 38 ( Marks: 1 ) – Please choose one
HDLC is an acronym for ______________.

► High-duplex line communication


► High-level data link control (Page 210)
► Half-duplex digital link combination
► Host double-level circuit

Question No: 39 ( Marks: 1 ) – Please choose one


The DSAP and SSAP are addresses used by _________ to identify the protocol stacks.

► LLC (Page 220)


► MAC
► Network

Question No: 40 ( Marks: 1 ) – Please choose one


The PDU has no flag fields, no CRC, and no station address

► TRUE (Page 220)


► FALSE

Question No: 41 ( Marks: 1 ) – Please choose one


Which of the following is a bus topology LAN that uses base band signaling and has a max? segment length
of 500 meters

► 10 Base5 (Page 223)


► 10 Base2
► 100 Base2
► 100 Base5

Question No: 42 ( Marks: 1 ) – Please choose one


Token Bus has no commercial application in data communications

► True (Page 232)


► False

Question No: 43 ( Marks: 1 ) – Please choose one


The BNC-T connector is a T-shaped device with _______ ports

► Three (Page 228)


► Two
► Four
► Five

Question No: 44 ( Marks: 1 ) – Please choose one


_________ is the access protocol used by traditional Ethernet.
► CSMA/CD (Page 222)
► CSMA/CA
► Token Ring
► CSMA
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter13/mixed_quiz.html

Question No: 45 ( Marks: 1 ) – Please choose one


When a collision is detected in a network using CSMA/CD. _________

► The frame is immediately resent


► A jam signal is sent by the station
► The backoff value is set to 0
► The backoff value is decremented by 1
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter13/mixed_quiz.html

Question No: 46 ( Marks: 1 ) – Please choose one


Like VRC, LRC and CRC, Checksum is also based on _______________.

► Redundancy (Page 179)


► Decimal Division
► Encryption
► Encoding

Question No: 47 ( Marks: 1 ) – Please choose one


Check sum method is used for _______________ layers.

► Physical
► Application
► Transport
► Data link http://www.cse.iitk.ac.in/users/dheeraj/cs425/lec09.html

Question No: 48 ( Marks: 1 ) – Please choose one


Repeater works on __________ layer.

► Data Link
► Physical
► Network (Page 224)
► Application

Question No: 49 ( Marks: 1 ) – Please choose one


When systems share a point to point link, then protocols used are called ___________ protocols.

► Direct (Page 21)


► Indirect
► Monolithic
► structured

Question No: 50 ( Marks: 1 ) – Please choose one


_________ requires more bandwidth.

► FSK http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter5/
► ASK
► PSK
► QAM
Fall 2009
CS601- Data Communication
Question No: 1 ( Marks: 1 ) – Please choose one
An unauthorized user is a network ___________ issue.

► Performance
► Reliability
► Security (Page 15)
► All of the given

Question No: 2 ( Marks: 1 ) – Please choose one


Which is not an element of protocol?

► semantics
► timing
► communication service module (Page 19)

Question No: 3 ( Marks: 1 ) – Please choose one


_______ is a multipoint topology.

► Ring
► Mesh
► Tree
► Bus (Page 31)

Question No: 4 ( Marks: 1 ) – Please choose one


Unidirectional traffic movement is overcome by dual ring technology.

► True (Page 33)


► False
Question No: 5 ( Marks: 1 ) – Please choose one
Physical layer define characteristics of interface between device and _________

► transmission medium http://en.wikipedia.org/wiki/OSI_model


► another device
► another peer physical layer at other side
► modem

Question No: 6 ( Marks: 1 ) – Please choose one


________ layer deals with syntax and semantics of information exchange.

► presentation (Page 51)


► session
► application
► physical

Question No: 7 ( Marks: 1 ) – Please choose one


To allow access to network resources is the function of ___________

► application layer (Page 53)


► physical layer
► network layer

Question No: 8 ( Marks: 1 ) – Please choose one


Time domain plot show changes in signal phase with respect to time.

► True
► False (Page 63)

Question No: 9 ( Marks: 1 ) – Please choose one


In 8QAM each signal shift or one baud represents ______.

► 4 bits
► 2 bits
► 5 bits
► 3 bits (Page 93)

Question No: 10 ( Marks: 1 ) – Please choose one


Modulation of an analog signal can be accomplished through changing the ___________ of the carrier
signal.

► amplitude
► frequency
► phase
► all of the given (Page 62)

Question No: 11 ( Marks: 1 ) – Please choose one


EIA 449 provides much better functionality than EIA ________

► 232 (Page 110)


► 223
► 262
► 222

Question No: 12 ( Marks: 1 ) – Please choose one


Which of the following is an example of ITU-T modem standards:

► T-series
► X-series
► N-series
► V-series (Page 114)

Question No: 13 ( Marks: 1 ) – Please choose one


Traditional modems are wide spread now to a data rate of __________.

► 56 Kbps (Page 115)


► 72 Kbps
► 42 Kbps
► 96 Kbps

Question No: 14 ( Marks: 1 ) – Please choose one


In case of uploading at the switching station, data is converted to digital signal using ___________.

► TCP
► PCM (Page 116)
► ICP
► TDM

Question No: 15 ( Marks: 1 ) – Please choose one


The RG number gives us information about ________.

► Twisted pairs
► Coaxial cables (Page 125)
► Optical fibers
► all of the given

Question No: 16 ( Marks: 1 ) – Please choose one


The _________ is an association that sponsors the use of infrared waves.

► IrDA http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter7/mixed_quiz.html
► EIA
► FCC
► PUD

Question No: 17 ( Marks: 1 ) – Please choose one


Optical fibers are defined by the ratio of the ___________ of their core to the diameter of their cladding.
► Diameter (Page 130)
► Radius
► Length
► Width

Question No: 18 ( Marks: 1 ) – Please choose one


The section of EM spectrum defined as Radio Communication is divided into _____ ranges called BANDS.

►8 (Page 132)
► 10
►5
►6

Question No: 19 ( Marks: 1 ) – Please choose one


Radio wave transmission utilizes ___________ different types of propagation.

► Four
► Three
► Two
► Five (Page 132)

Question No: 20 ( Marks: 1 ) – Please choose one


The VLF and LF bands use _________ propagation for communications.

► Ground
► Sky
► Line of sight (Page 136)
► Space

Question No: 21 ( Marks: 1 ) – Please choose one


In __________ propagation, low-frequency radio waves hug the earth.

► Ground
► Sky
► Line of Sight
► Space (Page 133)

Question No: 22 ( Marks: 1 ) – Please choose one


dB is ____________ if a signal is amplified.

► Negative
► Positive (Page 142)
► Null
► Zero
Question No: 23 ( Marks: 1 ) – Please choose one
Distortion occurs in a ___________ signal.

► Rectified
► Composite (Page 141)
► Amplified
► none of the given

Question No: 24 ( Marks: 1 ) – Please choose one


There are ________ basic categories of multiplexing.

► 3 (Page 148)
►4
►2
►5

Question No: 25 ( Marks: 1 ) – Please choose one


In bit ____________, MUX adds extra bits to a device.

► Stuffing (Page 156)


► Adding
► Multiplication
► Exchanging

Question No: 26 ( Marks: 1 ) – Please choose one


The local loop has ___________ cable that connects the subscriber telephone to the nearest end office.

► Twisted-pair (Page 160)


► Coaxial
► Fiber-optic
► None of the given

Question No: 27 ( Marks: 1 ) – Please choose one


FTTC stands for _____________

► flexible to the curb


► fiber to the curb (Page 166)
► fiber to the cable
► fiber to the center

Question No: 28 ( Marks: 1 ) – Please choose one


If the ASCII character G is sent and the character D is received, what type of error is this?

► Single-bit
► Multiple-bit
► Burst
► Recoverable
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 29 ( Marks: 1 ) – Please choose one


Which error detection method can detect a single-bit error?

► Simple parity check


► Two-dimensional parity check
► CRC
► All of the given
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 30 ( Marks: 1 ) – Please choose one


Flow control is needed to prevent ____________

► Bit errors
► Overflow of the sender buffer
► Overflow of the receiver buffer (Page 46)
► Collision between sender and receiver

Question No: 31 ( Marks: 1 ) – Please choose one


In data link layer, communication requires at least ___________ devices working together

►3
► 2 (Page 185)
►4
►5

Question No: 32 ( Marks: 1 ) – Please choose one


Data link control is composed of ____________ important functions.

►2
► 3 (Page 185)
►4
►5

Question No: 33 ( Marks: 1 ) – Please choose one


____________ coordinates the amount of data that can be sent before receiving acknowledgment

► flow control (Page 186)


► error control
► data control

Question No: 34 ( Marks: 1 ) – Please choose one


Primary device uses ____________ to receive transmission from the secondary devices.
► ACK
► ENQ
► POLL (Page 191)

Question No: 35 ( Marks: 1 ) – Please choose one


In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence number?

► 0 to 63
► 0 to 64
► 1 to 63
► 1 to 64
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter11/multiple_choice_quiz.html

Question No: 36 ( Marks: 1 ) – Please choose one


Data link protocols can be divided into ______________ sub-groups.

► two (Page 202)


► three
► four
► five

Question No: 37 ( Marks: 1 ) – Please choose one


XMODEM is a ______________ protocol designed for telephone-line communication b/w PCs.

► file transfer (Page 203)


► hardware
► software
► application exchange

Question No: 38 ( Marks: 1 ) – Please choose one


YMODEM uses ITU-T CRC-_____ for Error Checking

► 16 (Page 205)
► 32
►8
►4

Question No: 39 ( Marks: 1 ) – Please choose one


In Y-MODEM Multiple files can be sent simultaneously

► True (Page 205)


► False

Question No: 40 ( Marks: 1 ) – Please choose one


HDLC is an acronym for ______________.
► High-duplex line communication
► High-level data link control (Page 210)
► Half-duplex digital link combination
► Host double-level circuit

Question No: 41 ( Marks: 1 ) - Please choose one


What is present in all HDLC control fields?

► P/F bit (Page 215)


► N(R)
► N(S)
► Code bits

Question No: 42 ( Marks: 1 ) - Please choose one


Which of the following sublyer, resolves the contention for the shared media

► MAC (Page 219)


► LLC
► Physical

Question No: 43 ( Marks: 1 ) - Please choose one


Ethernet LANs can support data rates between _____________

► 1 and 100 Mbps (Page 223)


► 1 and 200 Mbps
► 1 and 500 Mbps
► 1 and 100 Gbps

Question No: 44 ( Marks: 1 ) - Please choose one


In FDDI, Token Passing is used as Access method.

► True (Page 236)


► False

Question No: 45 ( Marks: 1 ) - Please choose one


Bridges can divide a large ________ into smaller segments

► Network (Page 241)


► Packet
► Frame
► Address

Question No: 46 ( Marks: 1 ) - Please choose one


Like VRC, LRC and CRC, Checksum is also based on _______________.
► Redundancy (Page 179)
► Decimal Division
► Encryption
► Encoding

Question No: 47 ( Marks: 1 ) - Please choose one


Check sum method is used for _______________ layers.

► Physical
► Application
► Transport
► Data link http://www.cse.iitk.ac.in/users/dheeraj/cs425/lec09.html

Question No: 48 ( Marks: 1 ) - Please choose one


Which of the
following ___________ uses a series of filters to decompose multiplexed signal into its constituent signals?

► Bridge
► MUX
► DEMUX (Page 150)
► Switch

Question No: 49 ( Marks: 1 ) - Please choose one


We need
____________ to decompose a composite signal into its components.

► Fourier transform (Page 64)


► nyquist theorem
► shannon capacity

Question No: 50 ( Marks: 1 ) - Please choose one


Data from computer is in ____________ form and the local loop handles _________ signals.

► Analog; analog
► Analog; digital
► Digital; digital
► Digital; analog
http://highered.mcgraw-hill.com/sites/0072967757/student_view0/chapter9/multiple_choice_quiz.html

FINALTERM EXAMINATION
Spring 2009

Question No: 1 ( Marks: 1 ) - Please choose one


There are how many factors on which the performance of a network depends?
► Three
► Five (Page 14)
► Four
► Two

Question No: 2 ( Marks: 1 ) - Please choose one


_________requires the maximum number of I/O ports.

► Bus
► Star
► Mesh (Page 29)
► Ring

Question No: 3 ( Marks: 1 ) - Please choose one


Headers are added at layers 1 and 7 of OSI model.

► True
► False (Page 41)

Question No: 4 ( Marks: 1 ) - Please choose one


Trailer is only added at ________layer of OSI model.

► data link (Page 41)


► physical
► network
► application

Question No: 5 ( Marks: 1 ) - Please choose one


A sine wave must be an analog signal.

► True (Page 58)


► False

Question No: 6 ( Marks: 1 ) - Please choose one


If there is __________in voltage then the frequency is infinite.

► instantaneous change (Page 61)


► continuous change
► no change

Question No: 7 ( Marks: 1 ) - Please choose one


The inversion of the level at 1 bit is called as __________

► NRZ-L
► NRZ-I (Page 73)
► RZ

Question No: 8 ( Marks: 1 ) - Please choose one


The last process in PCM is _________ digital data into digital signal.

► encoding (Page 82)


► decoding
► modulating

Question No: 9 ( Marks: 1 ) - Please choose one


Amplitude in ASK is more resistive to EMI and Noise.

► True
► False (Page 87)

Question No: 10 ( Marks: 1 ) - Please choose one


If FCC regulations are followed, the carrier frequencies of adjacent AM radio stations are ____________
apart.

► 5 KHz
► 10 KHz (Page 95)
► 200 KHz
► 530 KHz

Question No: 11 ( Marks: 1 ) - Please choose one


In _____________ transmission, a start bit and a stop bit frame a character byte.

► Asynchronous serial (Page 99)


► Synchronous serial
► Parallel
► Asynchronous & Synchronous serial

Question No: 12 ( Marks: 1 ) - Please choose one


Synchronous transmissions have _____________.

► a start bit
► a stop bit
► gaps between bytes
► none of the given (Page 99)

Question No: 13 ( Marks: 1 ) - Please choose one


Transmission media are usually categorized as _____________

► Fixed or Unfixed
► Guided or Unguided (Page 119)
► Determinate or Indeterminate
► Metallic or Nonmetallic

Question No: 14 ( Marks: 1 ) - Please choose one


The RG number gives us information about ________.

► Twisted pairs
► Coaxial cables (Page 125)
► Optical fibers
► all of the given

Question No: 15 ( Marks: 1 ) - Please choose one


Radio wave and microwave frequencies range from _________.

► 3 to 300 KHz
► 300 KHz to 300GHz (Page 132)
► 3 KHz to 300 GHz
► 3 KHz to 3000 GHz

Question No: 16 ( Marks: 1 ) - Please choose one


All of popular Fiber optic connectors are ___________ shaped.

► Conical
► Barrel (Page 131)
► Circular
► Rectangular

Question No: 17 ( Marks: 1 ) - Please choose one


In ______________ method a signal can be directed in a straight from Antenna to antenna.

► Line of sight (Page 134)


► Ground propagation
► Sky propagation
► Microwaves

Question No: 18 ( Marks: 1 ) - Please choose one


Amplifiers are used to __________the signal to heat.

► Amplify (Page 142)


► Rectify
► Testify
► Nullify

Question No: 19 ( Marks: 1 ) - Please choose one


There are ________ basic categories of multiplexing.

► 3 (Page 148)
►4
►2
►5

Question No: 20 ( Marks: 1 ) - Please choose one


If a T-1 carries 8000 frames, the data rate is ___________

► 2.544 Mbps
► 1.544 Mbps (Page 165)
► 1.544 Kbps
► 1.544 Gbps

Question No: 21 ( Marks: 1 ) - Please choose one


FTTC stands for _____________

► flexible to the curb


► fiber to the curb (Page 166)
► fiber to the cable
► fiber to the center

Question No: 22 ( Marks: 1 ) - Please choose one


Optical signals are multiplexed using _________ at switching office to create wider BW optical signals

► WDM (Page 167)


► FDM
► TDM
► MUX

Question No: 23 ( Marks: 1 ) - Please choose one


Which error detection method consists of a parity bit for each unit as well as an entire data unit of parity
bits?

► Simple parity check


► Two-dimensional parity check
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html
► CRC
► Checksum

Question No: 24 ( Marks: 1 ) - Please choose one


If the ASCII character G is sent and the character D is received, what type of error is this?

► Single-bit
► Multiple-bit
► Burst
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html
► Recoverable

Question No: 25 ( Marks: 1 ) - Please choose one


Flow control is needed to prevent ____________

► Bit errors
► Overflow of the sender buffer
► Overflow of the receiver buffer. (Page 46)
► Collision between sender and receiver

Question No: 26 ( Marks: 1 ) - Please choose one


In data link layer, communication requires at least ___________ devices working together

►3
►2 (Page 185)
►4
►5

Question No: 27 ( Marks: 1 ) - Please choose one


Data link control is composed of ____________ important functions.

►2
►3 (Page 185)
►4
►5

Question No: 28 ( Marks: 1 ) - Please choose one


Error control is both error _________ and error ___________

► detection; correction (Page 186)


► detection; deletion
► detection; avoidance
► detection; forwarding

Question No: 29 ( Marks: 1 ) - Please choose one


ENQ/ACK stands for______________

► Enquiry/ Acknowledgment (Page 187)


► Enque/ Acknowledgment
► Enquist/ Acknowledgment
► none of the given

Question No: 30 ( Marks: 1 ) - Please choose one


In __________ ARQ, if a NAK is received, only the specific damaged or lost frame is retransmitted.
► Stop-and-wait
► Go-Back-N
► Selective reject (Page 200)
► Stop-and-wait & Go-back-N

Question No: 31 ( Marks: 1 ) - Please choose one


Sliding window requires that data frames be transmitted _______________

► Sequentially (Page 199)


► Frequently
► Synchronously
► Asynchronously

Question No: 32 ( Marks: 1 ) - Please choose one


Which of the following combines features of the other two?

► ZMODEM (Page 205)


► YMODEM
► XMODEM
► None of given

Question No: 33 ( Marks: 1 ) - Please choose one


BLAST stands for :

► Blocked asynchronous transmission (Page 205)


► Blocked synchronous transmission
► Barrel asynchronous transmission
► Below asynchronous transmission

Question No: 34 ( Marks: 1 ) - Please choose one


HDLC is an acronym for ______________.

► High-duplex line communication


► High-level data link control (Page 210)
► Half-duplex digital link combination
► Host double-level circuit

Question No: 35 ( Marks: 1 ) – Please choose one


The HDLC ___________ field defines the beginning and end of a frame.

► Flag (Page 214)


► Address
► Control
► FCS
Question No: 36 ( Marks: 1 ) – Please choose one
The shortest frame in HDLC protocol is usually the _________ frame.

► Information
► Supervisory (Page 213)
► Management
► None of the given

Question No: 37 ( Marks: 1 ) - Please choose one


The PDU has no flag fields, no CRC, and no station address

► TRUE (Page 220)


► FALSE

Question No: 38 ( Marks: 1 ) - Please choose one


_________ is the access protocol used by traditional Ethernet.

► CSMA/CD (Page 222)


► CSMA/CA
► Token Ring
► CSMA
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No: 39 ( Marks: 1 ) - Please choose one


Repeater is an amplifier, not a regenerator.

► True
► False (Page 240)

Question No: 40 ( Marks: 1 ) - Please choose one


Bridges can divide a large ________ into smaller segments

► Network (Page 241)


► Packet
► Frame
► Address

CS601 Data Communication


Final Term Examination – Spring 2006
Question No. 1 Marks : 2
Which error detection method uses ones complement arithmetic?
Ø Simple parity check
Ø Two-dimensional parity check
Ø CRC
Ø Checksum (Page 179)
Question No. 2 Marks : 2
In a time-domain plot, the vertical axis is the measure of ________.
Ø Amplitude (Page 59)
Ø Frequency
Ø Phase
Ø Time

Question No. 4 Marks : 2


Which topology requires a multipoint connection?
Ø Mesh
Ø Star
Ø Bus (Page 31)
Ø Ring

Question No. 8 Marks : 2


A timer is set when ___________ is (are) sent out.
Ø A data frame
Ø An ACK (Page 197)
Ø A NAK
Ø An ARQ

Question No. 9 Marks : 2


If the data unit is 111111, the divisor 1010, and the remainder 110, what is the dividend at the
receiver?

Ø 111111011
Ø 111111110
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html
Ø 1010110
Ø 110111111

FINALTERM EXAMINATION
FALL 2006

Question No: 1 ( Marks: 1 ) - Please choose one


OSI standard is practically implemented in the form of internet.
►TRUE
►FALSE

Question No: 2 ( Marks: 1 ) - Please choose one


TCP/IP application layers combine the functions of OSI Application, Session and Transport layers.
►TRUE (Page 55)
►FALSE
Question No: 3 ( Marks: 1 ) - Please choose one
Unipolar use one voltage levels.
►TRUE (Page 71)
►FALSE
Question No: 4 ( Marks: 1 ) - Please choose one
The material of core and cladding in fiber optic cable is same.
►TRUE
►FALSE (Page 127)
Question No: 5 ( Marks: 1 ) - Please choose one
Burst error is easily corrected then bit error.
►TRUE
►FALSE

Question No: 6 ( Marks: 1 ) - Please choose one


Set of rules governing communication is known as
►OSI model
►Protocol (Page 08)
►Medium
Question No: 7 ( Marks: 1 ) - Please choose one
WDM(wave division multiplexing) deals with
► electric waves
►light waves (Page 150)
►both
Question No: 8 ( Marks: 1 ) - Please choose one
A Null modem is a
►traditional modem
►technique to connect two DTE (Page 106)
►both
Question No: 9 ( Marks: 1 ) - Please choose one
Router work on
►data link layer
►physical layer
►network layer (Page 48)
Question No: 10 ( Marks: 1 ) - Please choose one
Poll/Select is a technique related with
►line control
►line discipline (Page 187)
►error control

Final Term Examination – Spring 2005

Question No. 1 Marks : 02


In cyclic redundancy checking, what is the CRC?

►the divisor
►the quotient
►the dividend
►the remainder
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No. 2 Marks : 02


In fiber optics the signal source is ____________waves.

►Light (Page 126)


►Radio
►Very Low frequency
►Infrared
Question No. 3 Marks : 02
Each device has a dedicated point – to – point line configuration only with the two devices on either
side of it.

►Ring Topology (Page 33)


►Star Topology
►Mesh Topology
►Tree Topology
Question No. 6 Marks : 02
Measures the relative strengths of two signals

►Decibel (Page 141)


►Bandwidth
►Wavelength
►Phase
Question No. 7 Marks : 02
Which multiplexing technique shifts each signal to a different carrier frequency?

►FDM (Page 149)


►Synchronous TDM
►Asynchronous TDM
►None of the above
Question No. 8 Marks : 02
The _____________of a signal is the width of the frequency spectrum.

►Amplitude
►Bandwidth (Page 66)
►Bit interval
►Phase

Final Term Examination – Spring 2005

Question No. 1
In cyclic redundancy checking, what is the CRC? Marks : 02

►the divisor
►the quotient
►the dividend
►the remainder
http://highered.mcgraw-hill.com/sites/0072515848/student_view0/chapter10/mixed_quiz.html

Question No. 2
In fiber optics the signal source is ____________waves. Marks : 02

►Light (Page 126)


►Radio
►Infrared
►Very Low frequency
Question No. 3 Marks : 02
Each device has a dedicated point – to – point line configuration only with the two devices on either
side of it.

►Ring Topology (Page 33)


►Mesh Topology
►Star Topology
►Tree Topology
Question No. 6
Measures the relative strengths of two signals Marks : 02
►Decibel (Page 141)
►Bandwidth
►Phase
►Wavelength
Question No. 7 Marks : 02
Which multiplexing technique shifts each signal to a different carrier frequency?

►FDM (Page 149)


►Synchronous TDM
►Asynchronous TDM
►None of the above
Question No. 8
The _____________of a signal is the width of the frequency spectrum. Marks : 02

►Amplitude
►Bandwidth (Page 66)
►Bit interval
►Phase

You might also like