Scribd
Upload
241 views

How To Create A Bootable Windows XP ISO From A Folder

This document provides a guide to creating a bootable Windows XP installation disc from files on an existing hard drive installation. It outlines downloading and copying necessary installation files to a new folder, creating text files to identify the version, and using a program like ImgBurn to adjust settings and burn the folder contents to disc to make it bootable. This allows reinstalling Windows XP without the original installation disc.

Uploaded by

Vaso Jaric
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
241 views

How To Create A Bootable Windows XP ISO From A Folder

This document provides a guide to creating a bootable Windows XP installation disc from files on an existing hard drive installation. It outlines downloading and copying necessary installation files to a new folder, creating text files to identify the version, and using a program like ImgBurn to adjust settings and burn the folder contents to disc to make it bootable. This allows reinstalling Windows XP without the original installation disc.

Uploaded by

Vaso Jaric
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 13

How to Create a Bootable Windows XP ISO from a

Folder
If your computer came installed with Windows XP, but didn’t come with a disc, you may be wondering how to go about
reinstalling in case something happens. Luckily, you can create a Windows XP installation disc with the files on your hard
drive. Follow this guide to learn how.

Method 1

Create the Folder

1.

Create a new folder. For simplicity, name it WINXP and place it in the root directory of your hard drive. You will
need to create a folder “C:\WINXP\”. This folder will temporarily house the Windows installation.
2.

Copy the installation files. In order to create a bootable disc from your Windows folder, you will need to have
an i386 folder on your computer. You can find it at the root of your Windows installation hard drive. The typical
location is C:\i386\.

o Copy the folder to the WINXP folder you created in the first step. Make sure that you copy and not
move the files. To ensure this, right-click on the i386 folder and select copy. Navigate to the WINXP
folder, right-click, and select Paste. The files will begin copying. Depending on the speed of your
computer, this could take a few minutes.
o After copying, you should have an i386 folder in your WINXP folder. The directory should look like
C:\WINXP\i386\.
3.

Create the Windows text file. Navigate to the WINXP folder and right-click in the window. Select New, and then
Text Document from the submenu. This will create a new text document in the WINXP folder. In the text
document, type “Windows” without the quotes, and add a single space after it. Hit the Enter key once.

o Click Save and set the filename as “WIN51”. Include the quotes to make sure that the file is saved
without an extension.
4.

Create the appropriate copies. Depending on which version of Windows you originally installed, you will need
to make specific copies of the file you just created. All the files that you create should be located in the WINXP
folder.

o XP Home: Make a copy of the file named WIN51IC.


o XP Home SP1: make the above file plus one named WIN51IC.SP1
o XP Home SP2: make the above files plus one named WIN51IC.SP2
o XP Home SP3: make the above files plus one named WIN51IC.SP3
o XP Pro: Make a copy of the file named WIN51IP.
o XP Pro SP1: make the above file plus one named WIN51IP.SP1
o XP Pro SP2: make the above files plus one named WIN51IP.SP2
o XP pro SP3: make the above files plus one named WIN51IP.SP3
5.

Slipstream the latest SP update. If you have ever upgraded your Windows XP installation with a Service Pack,
then you will need to upgrade your installation. This is because even though the system is upgraded when a
Service Pack is installed, the installation file is not.

o Download the Service Pack installation file from Microsoft. Make sure to download the pack that was
last installed. This guide will assume you are slipstreaming to SP3. Rename the downloaded file to
XPSP3.EXE and place it at the root of your C: drive for easy access.
o Open the command prompt. Click start and select Run… Enter “cmd” into the field and press enter. This
will open the command prompt. Type the following command and press Enter:

C:\XPSP3.EXE /integrate:C:\XPSETUP
Method 2

Burn the Disc

1.

Download the Windows boot sector. You can download the Windows boot sector legally and for free from
various places online. Be sure that you are downloading from a trusted source, and that you are downloading a
Windows XP boot sector in the correct language.

o Place the boot image in the root of your C: drive. It is typically called w2ksect.bin. This will be required
during the burning process.
2.

Download and install ImgBurn. There are a variety of free programs available that can create bootable discs.
This guide will assume you are using ImgBurn. You will need to make adjustments to the program’s settings
before you begin burning.
3.

Adjust your settings. Open ImgBurn and switch to Build mode. In the output menu, choose whether you are
burning to a blank disc or creating an image on your hard drive.

o Drag and drop your WINXP folder into ImgBurn.


o Select the Options tab. Change File System to ISO9660. Make sure that Recurse Subdirectories is
checked.
o Select the Advanced Tab and then select the Bootable Disc tab. Check the box for Make Image bootable.
Select None (Custom) from the Emulation Type dropdown menu. Click the Folder icon and select the
w2ksect.bin file that you downloaded earlier. Change the Sectors To Load value from 1 to 4.
4.

Click the Write/Build button. Confirm the changes you’ve made to the settings above. Enter any label you’d like
for the disc. The burn process will commence. The time this takes will vary depending on the speed of your CD
burner. Once the process is complete, your CD will work just like a typical Windows XP bootable installation CD.

Community Q&A
Ask a Question

Submit

Video

Tips

 Adjust the settings in ImgBurn exactly as outlined in the steps above. If you are using a program other than
ImgBurn, you will need to locate the equivalent settings in order to create a working CD.
EditRelated wikiHows

How to

Create a Download Folder

How to

Create an ISO File

How to

Make a Windows XP Bootable Disk Using a ISO File


How to

Activate Windows XP Without a Genuine Product Key

How to

Reset a Windows XP or Vista Password

How to

Install Windows XP
How to

Install Windows Xp Mode in Windows 7

How to

Fix the Volume on Your Computer in Windows

How to

Reinstall Windows XP Without the CD

You might also like