Scribd
Upload
4K views1 page

Calb 1

This document is a calibration certificate for a pressure gauge from Fontus Water Pvt. Ltd. issued by H-Guru. It provides details of the calibration including the pressure gauge's identification number and measurement ranges. The calibration was performed on April 26, 2012 within the laboratory's specified temperature and humidity conditions. The calibration results show the standard and measured readings at six pressure points within the gauge's specified range, all of which were within the measurement uncertainty of ±0.8% FSD.

Uploaded by

ranjt53
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
4K views1 page

Calb 1

This document is a calibration certificate for a pressure gauge from Fontus Water Pvt. Ltd. issued by H-Guru. It provides details of the calibration including the pressure gauge's identification number and measurement ranges. The calibration was performed on April 26, 2012 within the laboratory's specified temperature and humidity conditions. The calibration results show the standard and measured readings at six pressure points within the gauge's specified range, all of which were within the measurement uncertainty of ±0.8% FSD.

Uploaded by

ranjt53
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

CUSTOMER : M/S FONTUS WATER PVT. LTD.

D-4, FREEDOM FIGHTER ENCLAVE, NEB SARAI, IGNOU ROAD NEW DELHI
Calibration certificate of : PRESSURE GAUGE Certificate No. – HTCS/0105
Make : H-GURU Service Request No. : HTCS/03171
Range : 0-21 kg/cm2 Service Request Date : 25.04.2012
L.C. : 01 kg/cm2 Date of Calibration : 26.04.2012
I.D. No. : FWPL/PG-01 Suggested due Date : 26.04.2013
Sl. No. : ---------- Page : 1 of 1
: :
Visual Inspection OK Calibration Method WI-30
:
Environmental Condition of Lab.- : Uncertainty of Measurement : ±0.8% FSD
Temperature : (20+/-1) Deg. C (At 95% Confidence Level,
Humidity (50+/-10)% RH k=1.96)

DETAILS OF STANDARD EQUIPMENTS USED FOR CALIBRATION


Name of the Instrument : DIGITAL PRESSURE GAUGE : :
Make : VIJAY ENTERPRISES : :
Certificate No. : B5476 : :
Sl. No./ID No. : HTCS/PG//01 : :
: 22/09/2012 : :
Calibration Due Date
: NCCB, BALLABGARH : :
Traceable By
Calibration Results
Sl. No. Standard Reading Measured Reading
(kg/cm2) (kg/cm2)
01 00 00.00
02 05 05.27
03 10 10.46
04 15 15.34
05 20 20.26
06 21 21.32
Remarks:-

Notes :-
1. This calibration results reported in this certificate are valid at the time of & under the stated conditions of measurements.
2. This report should not be reproduced except in full without our prior permission in writing.
3. This certificate relates only to the item calibrated.
4. Format No.-F01(5.10/01).

Calibrated By Approved By

_____________________________________________________________________________________
B-19, Saraswati Enclave, Gali No.4, Khandsa Road, (Near Kadipur Chowk) Gurgoan
Mob. : 9810842522, 9999518005, E-mail : [email protected]

You might also like