NREZ010 5-2015

CAL. Z010 (R23 SERIES)

■ CHARACTERISTICS Choice of 12-Hour/24-Hour format

1. Time/calendar display: Hour, minute, second, • T h e t i m e d i s p l a y f o r m a t i n e i t h e r 12- h o u r
month, date and day of the week indication or in 24-hour indication can be
2. Time indication: 12-hour display format with selected alternately by pressing button B or
PM indicator and 24-hour display format are C. Under the 12-hour indication format, “PM”
available. mark appears in the afternoon, but no AM
mark appears in the morning. Under the 24-
3. S t o p wa t c h : The stopwatch can measure
hour indication format, no mark appears on
up to 23 hours 59 minutes and 59 seconds
the display.
i n 1/100- s e c o n d i n c r e m e n t s . L a p t i m e
measurement is available. Up to 15 lap times ■ E N G A G E M E N T / D I S E N G A G E M E N T O F
can be stored in memory. CHIME
Memor y recall function: Data obtained in With each press of Button C in the TIME/CALENDAR
the Stopwatch mode can be recalled after mode, the chime can be alternately engaged
measurement. or disengaged. The CHIME signal appears or
4. C o u n t d ow n t i m e r : T h e c o u n t d o w n t i m e r disappears on the display accordingly.
can be set up to 23 hours 59 minutes and 59
seconds. ■ H O W T O U S E S T O P WAT C H
5. Daily alarm: The daily alarm can be set to Press Button D to go to the STOPWATCH mode.
sound at the designated time on a 24-hour The STOPWATCH mode indicator appears on the
basis. Three individual daily alarms can be set. display.
S i n g l e - t i m e a l a r m : The Single-time alar m S T O P WAT C H m o d e i n d i c a t o r
sounds only once at a designated time and it
is disengaged automatically.　Five individual
single-time alarms can be set. B
6. Second Time Zone: Time in a different time
zone can be displayed.
7. Chime: The chime can be set to sound every D C
hour on the hour with a single beep.
8. I l l u m i n a t i n g l i g h t : T h e b u i l t - i n e l e c t r o - S T O P WAT C H s i g n a l
luminescent (EL) light evenly illuminates the
display for easy viewing in darkness. STOPWATCH OPERATION
■ B U T T O N S A N D D I S P L AY S Standard Measurement
Local city Day of the week

A (SET/LIGHT) B ( S TA R T / S T O P )
B B C
Chime
PM indi- signal Start Stop Reset
cator Alarm
signal
Hour Lap Time Measurement
Minute
Second
Stopwatch
signal B C C B C
Start Lap 1 Lap 2 Stop Reset
D (MODE) C (LAP/RESET)
Date
Month Ye a r Timer signal LAP number

The display mode changes in the following

order by pressing Button D.
TIME/CALENDAR S T O P WAT C H LAP time

D
To t a l t i m e f ro m S TA R T

* Measurement and release of lap time can be

repeated by pressing Button C.
* When Button C is pressed, the display changes
D to show the current lap time and total time from
M E M O RY R E C A L L START for 3 seconds, and then it automatically
returns to show the ongoing measurement.
* When the stopwatch is reset by pressing Button C,
D the measured data is stored in memory.

During the measurement, the STOPWATCH signal

keeps flashing.
Press Button D to return to the TIME/CALENDAR
D mode.
LOCAL CITY TIMER
Memory Recall Function
Data obtained in the Stopwatch mode can be
recalled after measurement. Each time data from
START to RESET is managed as a RUN. Press Button
D to return to the TIME/CALENDAR mode.
1. Press Button D to go to the Memory Recall
D D mode. The MEMORY RECALL moce indicator
SINGLE-TIME ALARM D A I LY A L A R M appears on the display.

M E M O RY R E C A L L m o c e i n d i c a t o r

■ HOW TO SET THE TIME/CALENDAR

1 Press Button A for 2 seconds to change the 2. Press Button C to show the data of the latest
display to the TIME/CALENDAR SETTING mode. measurement. The elapsed time and the
(The second digits start flashing.) date of measurement are displayed with a
2 Selection of the digits to be adjusted (flashing) RUN number.
is made in the following order by pressing 3. Press Button B to read each recorded lap time.
Button D. Recorded lap time is shown in order of each
lap number.
D D
SECONDS MINUTES HOURS 4. P re s s B u t t o n C t o e x i t t h e M e m o r y R e c a l l
Function. The display returns to the MEMORY
D D RECALL mode.
1 2 / 2 4 - H O U R F O R M AT YEAR

D D B
C
LOCAL CITY D AT E MONTH
D D
C
3 One digit (flashing) is increased or decreased
with each pressing of Button B or C, C
respectively. To move the digits quickly, keep D B
the Button pressed.
• Second setting
Press Button B or C in accordance with a B B
time signal. The second digits are reset to
“00” and start counting immediately.
When the second digits count any number D C
f ro m “30” t o “59” a n d B u t t o n B o r C i s
p re s s e d , o n e minut e is ad d ed and t he
seconds are immediately reset to “00.” How to delete all of the memories
• Press Button A for 2 seconds. The “DELETE”
indicator appears on the display when the
A B watch starts deleting stored data. When the
deletion is finished, the display returns to the
A MEMORY RECALL mode, and after 1 second, it
automatically goes to the STOPWATCH mode.
C

TIME/CALENDAR mode SECOND SETTING

A A
D

B
A

MINUTE SETTING
After
D 1 second

B B ■ H O W T O U S E C O U N T D O W N T I M E R
Press Button D three times to go to the TIMER
mode. The TIMER mode indicator appears on the
C C display.
1. Press Button A for 2 seconds to change the
12/24 FORMAT SETTING HOUR SETTING display to the TIMER SETTING mode. The hour
digits start flashing.
D D 2. P r e s s B u t t o n B o r C t o s e t t h e s e c o n d
digits. One digit (flashing) is increased or
decreased with each pressing of Button B or C,
B B respectively. To move the digits quickly, keep
the Button pressed.
3. Press Button D to confirm the second setting
C C and move on to the minute setting. The minute
digits start flashing.
LOCAL CITY SETTING YEAR SETTING 4. Press Button B or C to set the minute digits.
One digit (flashing) is increased or decreased
D D with each pressing of Button B or C,
respectively. To move the digits quickly, keep
the Button pressed.
B B 5. Press Button D to confirm the minute setting
and move on to the hour setting. The hour
D digits start flashing.
C 6. Press Button D to set the Timer number.
C
7. Press Button A to complete the timer setting.
DATE SETTING MONTH SETTING
4 After all the adjustments are completed, press
Button A to retur n to the TIME/CALENDAR
mode.
 TIMER number How to stop the alarm while sounding
T h e a l a r m s o u n d s f o r 10 s e c o n d s a t t h e
B d e s i g n a t e d t i m e . To s t o p i t m a n u a l l y w h i l e
sounding, press any Button.
C
C ■ H O W T O S E T S E C O N D T I M E Z O N E
Press Button D six times to go to the SECOND TIME
ZONE mode.
SECOND SETTING
1. Press Button C to select the city code.
D 2. If the daylight saving time is effective in the
selected city, press Button B to show the
daylight saving time. The daylight saving time
A B (“DST”) mark will appear.
Press Button D to return to the TIME/CALENDAR
mode.
C Local city Second time zone

MINUTE SETTING

D Local time
Time and
B date of
Second time
zone

C C City code Time City

differences
TIMER NUMBER SETTING HOUR SETTING H11 -11 Pago Pago
HNL -10 Honolulu, Patete
TIMER OPERATION
ANC -9 Anchorage, Nome
LAX -8 Los Angeles, San Francisco,
B B C
Las Vegas, Vancouver, Seattle
Start Stop Reset DEN -7 Denver, Edmonton
CHI -6 Chicago, Mexico City, Houston,
1. Press Button B in the TIMER mode to start the
countdown timer. New Orleans, Winnipeg
2. Press Button B to stop the countdown timer. NYC -5 New York, Washington, D.C.,
3. To reset the timer, press Button C.
Press Button D to return to the TIME/CALENDAR
Montreal, Lima, Havana, Boston
mode. SDQ -4 Santo Domingo(*)
RIO -3 Rio de Janeiro, Buenos Aires,
Brasilia, Montevideo, São Paulo
H02 -2
H01 -1 Praia
GMT 0
LON 0 London, Dublin, Reykjavik,
■ H O W T O U S E D A I LY A L A R M
Press Button D four times to go to the ALARM
Casablanca, Lisbon
mode. The DAILY ALARM mode indicator appears PAR 1 Paris, Vienna, Brussels, Berlin,
on the display.
Madrid, Rome, Milan, Algiers,
1. Press Button A for 2 seconds to change the
display to the DAILY ALARM SETTING mode. The Hamburg, Frankfurt, Stockholm
hour digits start flashing. CAI 2 Cairo, Athens, Helsinki,
2. One digit (flashing) is increased or decreased
with each press of Button B or C, respectively. Istanbul, Beirut, Damascus
To move the digits quickly, keep the Button JED 3 Jeddah, Baghdad, Nairobi,
pressed.
3. Press Button D to confirm the hour setting and
Kuwait, Riyadh, Moscow
move on to the minute setting. The minute DXB 4 Dubai, Abu Dhabi,
digits start flashing.
Muscat
4. Press Button B or C to set the minute digits.
One digit (flashing) is increased or decreased KHI 5 Karachi, Male
with each press of Button B or C, respectively. DAC 6 Dacca, Colombo
To move the digits quickly, keep the Button
pressed. BKK 7 Bangkok, Hanoi, Jakarta,
5. Press Button D to confirm the minute setting Phnom Penh, Vientiane
and move on to the alarm number setting. The HKG 8
alarm number starts flashing.
Hong Kong, Beijing, Singapore,
6. Press Button B or C to select the alarm number. Manila, Taipei, Kuala Lumpur, Perth
7. Press Button A to complete the alarm setting. TYO 9 Tokyo, Seoul, Pyongyang
SYD 10 Sydney, Guam, Melbourne, Rabaul
A B NOU 11 Nouméa, Port Villa
A
WLG 12 Wellington, Auckland,
C Christchurch, Nauru Island
(*) The display shows “CCS” (Santiago), but
HOUR SETTING currently Santiago is UTC-3.
A D D ■ H O W T O U S E E L B A C K L I G H T
In any mode press Button A to illuminate the
display for about 4 seconds.
A B B Note:
1. T h e b a c k l i g h t o f t h e w a t c h e m p l o y s a n
D electro-luminescent (EL) light, which tends to
C C lose illuminating power after very long use.
2. The illumination provided by backlight may
be hard to see when viewed under direct
ALARM NUMBER SETTING MINUTE SETTING sunlight.
Note: The alarm can be set only in one time zone.
■ B AT T E RY C H A N G E
Engagement/disengagement of daily alarm The miniature battery CR2032 which powers
With each press of Button B in the DAiLY ALARM your watch should last approximately 4 years.
mode, the alarm can be alternately engaged However, because it is inserted at the factory,
or disengaged. The ALARM signal appears or the actual life of the battery once in your
disappears on the display accordingly. possession may be less than 4 years.
How to stop the alarm while sounding Be sure to replace the battery to prevent any
possible malfunction as soon as it runs down. To
T h e a l a r m s o u n d s f o r 10 s e c o n d s a t t h e replace the battery we recommend taking the
d e s i g n a t e d t i m e . To s t o p i t m a n u a l l y w h i l e watch to a local watch repair shop.
sounding, press any Button.
Note: I f t h e a l a r m i s u s e d f o r m o r e t h a n 20
seconds a day and/or the illuminating
light for more than 8 seconds a day, the
■ H O W T O U S E S I N G L E - T I M E A L A R M battery life may be less than the specified
Press Button D five times to go to the SINGLE-TIME period.
ALARM mode. The SINGLE-TIME ALARM mode
indicator appears on the display. ■ C A R E O F Y O U R L O R U S WAT C H
1. Press Button A for 2 seconds to change the This watch contains precise electronic
display to the SINGLE-TIME ALARM SETTING components. Never attempt to open the case
mode. The minute digits start flashing. or remove the back cover.
2. Press Button B or C to set the minute digits.
• BATTERY
One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
CAUTION
pressed.
3. Press Button D to confirm the minute setting
and move on to the hour setting. Do not expose the old battery to fire
or recharge it. Keep it at a place be-
One digit (flashing) is increased or decreased
yond the reach of chil­dren. If a child
with each press of Button B or C, respectively.
swallows it, consult a doctor immedi-
To move the digits quickly, keep the Button
ately.
pressed.
4. Press Button D to confirm the hour setting and • WATER RESISTANT
move on to the year setting. The year digits
start flashing. Condition Accidental
5. One digit (flashing) is increased or decreased of use contact Swimming
with each press of Button B or C, respectively. with water, and taking Skin div- Scuba
such as ing diving
To move the digits quickly, keep the Button Indication a shower
on the dial/ splashes
pressed. case back and rain
6. Press Button D to confirm the year setting and No
move on to the month setting. The month digits Indication NO NO NO NO
start flashing. WAT E R R E -
7. One digit (flashing) is increased or decreased S I S TA N T YES NO NO NO
with each press of Button B or C, respectively. WAT E R R E -
To move the digits quickly, keep the Button S I S TA N T YES YES NO NO
pressed. (50M/5 BAR)
8. Press Button D to confirm the month setting WAT E R R E -
and move on to the date setting. The date S I S TA N T YES YES YES NO
digits start flashing. ( 100M/10 BAR
or above
(
9. One digit (flashing) is increased or decreased
with each press of Button B or C, respectively. * I f y o u r w a t c h i s 200 M /20 B A R , 100 M /10
To move the digits quickly, keep the Button BAR or 50 M/5 BAR water resistant, it is so
pressed. indicated on the dial/case back.
10. Press Button A to complete the single time • Do not operate the buttons when the watch is
alarm setting. wet.
• If the watch is exposed to salt water, rinse it
in fresh water and then wipe it thoroughly
A B dry.
A
• Should you find any water or condensation
inside the watch, immediately have it
C checked. Water can corrode electric parts
inside the case.
MINUTE SETTING Caution:
Leather straps are not water resistant except
D D so indicated, even if the watch head is water
resistant.
• ALLERGIC REACTION
B B
Because the case and band touch the skin
directly, it is important to clean them regularly. If
not, shirt sleeves may be stained and those with
C C delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
HOUR SETTING
allergic reaction. If you develop a rash on your
D AT E S E T T I N G
wrist, stop wearing and consult a physician.
D D • MAGNETISM
Your watch will be adversely affected by strong
magnetism.Keep it away from close contact
B B with magnetic objects.
• SHOCKS AND VIBRATIONS
D Your watch may be wor n for nor mal sports
C C activities, but be careful not to drop it or hit it on
hard surfaces.
• TEMPERATURE
MONTH SETTING YEAR SETTING
Your watch is preadjusted so that constant
11. Press Button D to return to the TIME/CALENDAR accuracy may be insured at normal tem­p era­
mode. ture.
• CLEANING
Note: The alarm can be set only in one time zone. Use only a soft cloth and clean water for
cleaning your watch. Never use chemicals, as
Engagement/disengagement of single-time the waterproof gasket will corrode.
alarm
■ S E RV I C E
With each press of Button B in the SINGLE-TIM
W h e n y o u r L O R U S w a t c h re q u i re s re p a i r o r
ALARM mode, the alarm can be alternately
servicing, please see the enclosed WARRANTY/
engaged or disengaged. The ALARM signal
GUARANTEE.
appears or disappears on the display accordingly. Printed in China