Scribd
Upload
2K views1 page

128 Sid 240

This document provides diagnostic information for a Volvo vehicle that is experiencing issues with its engine control unit (ECU). It lists a fault code of 128 for the ECU and 240 for a program memory issue. The fault mode is described as a self-test error in the ECU. Symptoms include the central warning light being red, a continuous buzzer, an error message screen, and the engine not starting. The recommended actions are to check parameters if the issue occurred during programming or reprogram or replace the ECU if the malfunction occurred during operation.

Uploaded by

Naing Min Htun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

128 Sid 240

This document provides diagnostic information for a Volvo vehicle that is experiencing issues with its engine control unit (ECU). It lists a fault code of 128 for the ECU and 240 for a program memory issue. The fault mode is described as a self-test error in the ECU. Symptoms include the central warning light being red, a continuous buzzer, an error message screen, and the engine not starting. The recommended actions are to check parameters if the issue occurred during programming or reprogram or replace the ECU if the malfunction occurred during operation.

Uploaded by

Naing Min Htun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Volvo Guided Diagnostics

Date: Information Type:


11/17/2011 Diagnostics Fault Codes 128: Engine ECU 240: Programme memory
Profile:
EXC, EC290B LC (Volvo) [GB] EXC, EC290B LC (Volvo) [GB] EXC, EC290B LC (Volvo) [GB] EXC, EC290B LC (Volvo) [GB]
EXC, EC290B LC (Volvo) [GB]

MID128 Engine ECU;SID240 Programme memory(128 SID240)


128 SID240

Reference 3002 Engine control unit E-ECU, function description

Fault mode diagnosis

Fault mode Detection conditions:The engine control unit (E-ECU) registers: Self-test error in engine
FMI 2 control unit
Symptom: Possible causes:

 Red central warning  Programming error


 Buzzer sounds continuously  Internal error in the engine
 Error message screen control unit
 Engine does not start

Action Parameters should be checked if malfunction has occurred in connection with


programming
If malfunction has occurred during operation, the E-ECU should be re-programmed or
replaced

Guided Diagnostics

You might also like