Scribd
Upload
674 views2 pages

ETERKYD 50713-S-60 TDS (Non Stick Coating) PDF

ETERKYD 50713-S-60 is a silicone-modified polyester resin recommended for cookware, bakeware, and electrical appliance coatings. It exhibits heat hardness up to 250°C and maintains good gloss and color retention at high temperatures. The technical data sheet provides curing conditions, specifications, and a suggested formulation for this resin consisting of the resin, TiO2, and solvents.

Uploaded by

Imran Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
674 views2 pages

ETERKYD 50713-S-60 TDS (Non Stick Coating) PDF

ETERKYD 50713-S-60 is a silicone-modified polyester resin recommended for cookware, bakeware, and electrical appliance coatings. It exhibits heat hardness up to 250°C and maintains good gloss and color retention at high temperatures. The technical data sheet provides curing conditions, specifications, and a suggested formulation for this resin consisting of the resin, TiO2, and solvents.

Uploaded by

Imran Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA

ETERKYD 50713-S-60
Silicone-Modified Polyester
　
　　ETERNAL CHEMICAL CO., LTD. 2006/11/15

Silicone-Modified Polyester Resin for Decorative high Quality Coating of Cookware.


Bakware and Electrical Domestic Appliances.

DESCRIPTION : ETERKYD 50713-S-60 is a premium quality high temperature baking


finishes silicone modified polyester resin. It is recommend for use in
cookware ,bakeware and electrical domestic finishes, designed for heat
resistance and color retention at elevation temperatures.

PERFORMANCE :
 Exhibits heat hardness.
 Resistance to permanent temperature up to 250℃.
 Exhibits good gloss resistance and heating loss resistance.
 Meets F.D.A. Regulations (21CFR 175.300) for coatings in contact
with food.

SUGGESTED USES :
 Cookware, e.g. pots, pans.
 Bakeware, e.g. toasters, grills.
 Electrical domestic appliance.
 Decorative coating for high temperature applications.

CURING CONDITIONS :
 200℃ 60mins.
 230℃ 20mins.
 280℃ 10mins.

SPECIFICATIONS

Appearance Clear & Clean


Percent solids (1g x 180℃ x 60mins) 59±1%
Solvent PMA/NBA
Viscosity, (G-H @25℃) V-Y
Viscosity, (Brookfied,#4*60rpm @25℃) 1000-2200
Color (Gardner) 1 max.
Acid Value (mg KOH/g, solid) <=10

1
SUGGESTED FORMULATION

Materials
ETERKYD 50713-S-60 50.0
TiO2 30.0

PMA 20.0
Dispersing agent 0.2

The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this
bulletin are made without guarantee or representation as to results. We suggest that you evaluate these recommendations and
suggestions in your own laboratory prior to use. Our responsibility for claims arising from breach of warranty. negligence. or
otherwise is limited to the purchase price of the material.

You might also like