0% found this document useful (0 votes)
206 viewsIcom IC-V220, U220 Transceiver WW PDF
Uploaded by
Chris AvoCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
206 viewsIcom IC-V220, U220 Transceiver WW PDF
Uploaded by
Chris AvoCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 12
MASTER
Do Not Remove
From Tech Support Area
INSTRUCTION MAN
VHF TRANSCEIVER
IC-V2e20
UHF TRANSCEIVER
___ic=Ue220
Icom Inc. IMPORTANT SAFETY PRECAUTIONS
READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL!
This instruction manual contains important safety and oper-
ating instructions for the 1C-V220 and 10-220.
NEVER connect the transceiver to an AC outlet.
NEVER connect the transceiver to a 24 V DC car battery.
Only 12 V DC car batteries can be used.
NEVER allow children to touch the transceiver.
NEVER expose the transceiver to rain, snow or any liquids.
NEVER disassemble the transceiver. Incorrect reassem:
bly may result in a fire hazard or electric shock.
NEVER place the transceiver where normal operation of the
vehicle may be hindered or where it could cause bodily injury.
NEVER place the transceiver in excessively humid or dusty
environments, or in direct sunlight
NEVER use the transceiver ifitis covered by objects which
impede heat dispersal
NEVER use an accessory which Icom does not sell or
recommend, as it could result ina fire hazard or electric shock.
AVOID using or storing the transceiver in extreme cold
(under -30°C; —22°F) or extreme heat (over +60°C;
+140°F},
BE CAREFUL! The heatsink will become hot when oper-
ating the transceiver continuously for long periods. TABLE OF CONTENTS
IMPORTANT SAFETY PRECAUTIONS i
‘TABLE OF CONTENTS 1
FOREWORD 1
UNPACKING .... 1
1 PANEL DESCRIPTION 2
2 INSTALLATION AND CONNECTIONS «noes 9-5
3. SPECIFICATIONS 6
4 OPTIONS 7
5 OPERATION . sonnnnns 89
UNPACKING
®
ge?
FOREWORD
Thank you for choosing the Icom IC-V220 VHF TRAN-
‘SCEIVER or the IC-U220 UHF TRANSCEIVER. The IC-V220
land IC-U220 are compact and easy-to-operate transceivers
designed with Icom’s state-of-the-art technology.
It you have questions regarding the operation of the tran
sceiver, please feel free to contact your nearest Icom Dealer
cr Service Center.
‘Accessories included with the IC-V220/IC-U220:
@ Mounting bracket
@ DC power cable (OPC-0448)
@ Microphone (EM-65)
@ Microphone hanger
© Cable lugs
© External speaker plug (8.5 6)
Fuses (15 A)
© Microphone connector covers
@ Mounting screws, nuts and washers ___|
gm 1949 PANEL DESCRIPTION
Front panel
[SQUELCH CONTROL [SGL}
Sets the squelch threshold level
POWER SWITCH [POWER]
‘Turns power ON and OFF.
VOLUME CONTROL [VOL]
Adjusts the audio output level
MIG CONNECTOR JACK
Connects the supplied micro-
phone.
(CHANNEL SELECTOR
Selects an operating c
DIMMER SWITCH [DIMMER
Selects the intensity of the func
tion display,
FUNCTION DISPLAY
™ Function display
BUSY INDICATOR [FX [CALL INDIGATOR [CALL]
Appears when the selected chan- [Appears when you are called.
el is busy.
TRANSMIT INDIGATOR [TX]
Appears while transmitting, TIME-OUT TIMER INDICATOR
ror)
Appears when continuous trans-
(CHANNEL INDICATOR mission time has exceeded the
‘Shows the operating channel, TOT time. INSTALLATION AND CONNECTIONS 2 Zz
1 Microphone connector
Before connecting the microphone, attach the supplied U-type
and L-type connector covers to the microphone connector plug
‘as shown in the figure below.
+
\
+ sees
22
Ltype connector Gover
1 Microphone connection
Insert the microphone connector plug into the microphone
‘connector jack as shown in the figure below.
To remove the microphone connector plug, push and hold the
clip of the plug, then pull out the plug as shown in the figure
below.
lp 2 INSTALLATION AND CONNECTIONS
i Main body installation
1, Select a location that can support the weight of the tran-
sceiver, and does not interfere with your driving in any way.
2. Place the mounting bracket in a suitable mounting loca
tion and mark the screw holes on the bracket. Make sure
the controls and switches can be reached easily,
3, Drill the holes and install the bracket; then, mount the tran-
sceiver on the bracket as shown in the figure below.
4. Adjust the angle for the clearest view of the function
display.
When using
selttapping
‘DO NOT install the transceiver where hot or cold air blows
directly onto it.
1 Microphone hanger
Install the microphone hanger withthe supplied grounding
lead at the desired postion near the transceiver.. The other
terminal of the lead must be grounded,
This microphone hanger functions asa monitor switch. When
the microphone is off the hanger, CTCSS or DTCS squelch
Is opened, and undesired signals may be heard.
Microphone
ranger
To chassis
ground INSTALLATION AND CONNECTIONS 2
™@ Connections
1. ANTENNA 3, EXTERNAL SPEAKER
‘Ask your dealer about the best location and antenna For clearer audio reception an optional external speaker
selection, ‘can be used, if you desire,
2. DC POWER
Pay attention to polarities. NEVER connect a 24 V DC.
battery directly. This may damage the transceiver.
When using the transceiver with AC, the PS-200 DC
POWER SUPPLY is available.
L259 connector
To antenna
