PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO.

LLC 1
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Support Lug Calculations: Operating Case

INPUT ECHO OF SUPPORT LUG INPUT

Type of Geometry : Gussets with No Top Plate

Number of Support Lugs Nlug 3

Distance from Vessel OD to Lug Contact Point Dlug 198.5000 mm

Lug Support Force Bearing Width Wfb 200.0000 mm

Lug Material AISI 4130

Lug Yield Stress 517.20 MPa

Radial Width of bottom Support Lug Plate Wpl 350.0000 mm

Effective Force Bearing Length Lpl 340.0000 mm

Thickness of bottom Support Lug Plate Tpl 20.0000 mm

Distance between Gussets Dgp 240.0000 mm

Mean Width of Gusset Plate Wgp 200.0000 mm

Height of Gusset Plate Hgp 330.0000 mm

Thickness of Gusset Plate Tgp 20.0000 mm

Pad Width along Circumference C11P 400.000 mm

Pad Length along Vessel Axis C22P 400.000 mm

Pad Thickness Tpad 30.000 mm

Bolt Material SA-193 B7

Bolt Allowable Stress at Design Temperature 172.38 MPa

Thread Series TEMA

Bolt Diameter 41.28 mm

Results for Support Lugs: Description: LUG SUPPORT

Overturning Moment at Support Lug 930135. N-mm

Weight Load at the top of one Lug 22681. N

Force on one Lug, Operating Condition [Flug]:

= ( W/Nlug + Mlug/( Rlug * Nlug/2 ) )

= ( 68043/3 + 930135/( 600.00 * 3/2 ))

= 23714.18 N
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 2
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Bearing Area [Ba]:

= Lpl * Wfb

= 340.000 * 200.000

= 0.07 m²

Bending Stress in bottom Plate (Unif. Load) Per Bednar p.156 [Spl2]:

= Beta1 * Flug/Ba * Wfb² / Tpl² per Roark & Young 5th Ed.

= 0.768 * 23714.2/0.068 * 200.000²/20.000²

= 26.80 MPa

Bottom Plate Required Thickness (Uniform Load) 5.5755 mm

Bottom Plate Required Thickness based on ADM S 3/4 [trAD]:

= 0.71 * Dgp(( Flug / ( Lpl * Wfb ))/Spa )½

= 0.71*240.00((23714/(340.00*200.00))/344.800)½

= 5.419 mm

Note: If using the AD Code recommendations, the force bearing width (Wfb) must

be greater than or equal to 1/3 of the bottom plate radial width (Wpl)

plus the pad thickness (Padthk), if there is a pad.

Bottom Support Plate Allowable Stress [Spa]:

= 2/3 * Ylug

= 2/3 * 517

= 344.80 MPa

Gusset Plate Axial Stress ( Force / Gusset Plate Area ) [Sgp]:

= ( Flug/2 )/( Wgp * Tgp )

= ( 23714/2 )/( 200.000 *20.0000 )

= 2.96 MPa

Required Thickness of Gussets per AISC 4.6710 mm

Gusset Plate Allowable Stress [Sga]:

= ( 1-(Klr)²/(2*Cc²))*Fy /( 5/3+3*(Klr)/(8*Cc)-(Klr³)/(8*Cc³)

= ( 1-( 66.00 )²/(2 * 86.68² )) * 517/

( 5/3+3*(66.00 )/(8* 86.68 )-( 66.00³)/(8*86.68³)

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 3
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

= 193.60 MPa

Maximum Compressive Gusset Plate Stress per Bednar [SgpB]:

= Flug*( 3*Dlug-Wpl )/( Tgp* Wpl² * (sin(Alph_G))² )

= 23714 *( 3*198.500 -350.000 )/( 20.0000 *350.000²*(sin(47.73 ))² )

= 4.34 MPa

Gusset Plate Allowable Compressive Stress [SgaB]:

= 18000/(1+(1/18000)*( Hgp/sin(Alph_G)/(0.289*Tgp))² )

= 18000/(1+(1/18000)* (330.000/sin(47.73 )/(0.289*20.0000 ))² )

= 93.26 MPa

Note :

There was no uplift. Please choose an appropriate bolt

size for this support design.

Input Echo, WRC107/537 Item 1, Description: LUG SUPPORT

Diameter Basis for Vessel Vbasis ID

Cylindrical or Spherical Vessel Cylsph Cylindrical

Internal Corrosion Allowance Cas 1.5000 mm

Vessel Diameter Dv 625.000 mm

Vessel Thickness Tv 89.000 mm

Design Temperature 121.00 °C

Attachment Type Type Rectangular

Parameter C11 C11 144.00 mm

Parameter C22 C22 264.00 mm

Thickness of Reinforcing Pad Tpad 30.000 mm

Pad Parameter C11P C11p 400.000 mm

Pad Parameter C22P C22p 400.000 mm

Design Internal Pressure Dp 68.970 MPa

Include Pressure Thrust No

Vessel Centerline Direction Cosine Vx 0.000

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 4
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Vessel Centerline Direction Cosine Vy 1.000

Vessel Centerline Direction Cosine Vz 0.000

Nozzle Centerline Direction Cosine Nx 1.000

Nozzle Centerline Direction Cosine Ny 0.000

Nozzle Centerline Direction Cosine Nz 0.000

Global Force (SUS) Fx 0.0 N

Global Force (SUS) Fy 22681.1 N

Global Force (SUS) Fz 0.0 N

Global Moment (SUS) Mx 0.0 N-mm

Global Moment (SUS) My 0.0 N-mm

Global Moment (SUS) Mz 4504026.5 N-mm

Internal Pressure (SUS) P 68.97 MPa

Include Pressure Thrust No

Global Force (OCC) Fx 433.5 N

Global Force (OCC) Fy 1033.1 N

Global Force (OCC) Fz 0.0 N

Global Moment (OCC) Mx 0.0 N-mm

Global Moment (OCC) My 86075.4 N-mm

Global Moment (OCC) Mz 205146.5 N-mm

Occasional Internal Pressure (OCC) Pvar 0.00 MPa

Use Interactive Control No

WRC107 Version Version March 1979

Include Pressure Stress Indices per Div. 2 No

Compute Pressure Stress per WRC-368 No

Note:

WRC Bulletin 537 provides equations for the dimensionless curves

found in bulletin 107. As noted in the foreword to bulletin 537,

"537 is equivalent to WRC 107". Where 107 is printed in the

results below, "537" can be interchanged with "107".

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 5
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

WRC 107 Stress Calculation for SUStained loads:

Radial Load P 0.0 N

Circumferential Shear VC 0.0 N

Longitudinal Shear VL 22681.1 N

Circumferential Moment MC 0.0 N-mm

Longitudinal Moment ML -4504026.5 N-mm

Torsional Moment MT 0.0 N-mm

Dimensionless Parameters used : Gamma = 5.00 ( 3.17)

Dimensionless Loads for Cylindrical Shells at Attachment Junction:

-------------------------------------------------------------------

Curves read for 1979 Beta Figure Value Location

-------------------------------------------------------------------

N(PHI) / ( P/Rm ) 0.338 4C ! 0.862 (A,B)

N(PHI) / ( P/Rm ) 0.338 3C ! 0.765 (C,D)

M(PHI) / ( P ) 0.243 2C1 ! 0.097 (A,B)

M(PHI) / ( P ) 0.243 1C ! 0.123 (C,D)

N(PHI) / ( MC/(Rm**2 * Beta) ) 0.236 3A ! 0.138 (A,B,C,D)

M(PHI) / ( MC/(Rm * Beta) ) 0.258 1A ! 0.098 (A,B,C,D)

N(PHI) / ( ML/(Rm**2 * Beta) ) 0.289 3B ! 0.542 (A,B,C,D)

M(PHI) / ( ML/(Rm * Beta) ) 0.276 1B ! 0.047 (A,B,C,D)

N(x) / ( P/Rm ) 0.293 3C ! 0.817 (A,B)

N(x) / ( P/Rm ) 0.293 4C ! 0.890 (C,D)

M(x) / ( P ) 0.301 1C1 ! 0.104 (A,B)

M(x) / ( P ) 0.301 2C ! 0.077 (C,D)

N(x) / ( MC/(Rm**2 * Beta) ) 0.236 4A ! 0.207 (A,B,C,D)

M(x) / ( MC/(Rm * Beta) ) 0.319 2A ! 0.056 (A,B,C,D)

N(x) / ( ML/(Rm**2 * Beta) ) 0.289 4B ! 0.163 (A,B,C,D)

M(x) / ( ML/(Rm * Beta) ) 0.321 2B ! 0.072 (A,B,C,D)

Note - The ! mark next to the figure name denotes curve value exceeded.

Stress Concentration Factors Kn = 1.00, Kb = 1.00

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 6
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Stresses in the Vessel at the Attachment Junction

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.5 0.5 -0.5 -0.5 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

| |

Tot. Circ. Str.| 1.3 -0.4 -1.3 0.4 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Bend. ML | 1.2 -1.2 -1.2 1.2 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 1.4 -1.0 -1.4 1.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

-------------------------------------------------------------------------

Str. Int. | 1.4 1.0 1.4 1.0 0.7 0.7 0.7 0.7|

Dimensionless Parameters used : Gamma = 5.00 ( 4.09)

Dimensionless Loads for Cylindrical Shells at Pad edge:

-------------------------------------------------------------------

Curves read for 1979 Beta Figure Value Location

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 7
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

-------------------------------------------------------------------

N(PHI) / ( P/Rm ) 0.559 4C ! 0.749 (A,B)

N(PHI) / ( P/Rm ) 0.559 3C ! 0.603 (C,D)

M(PHI) / ( P ) 0.559 2C1 ! 0.040 (A,B)

M(PHI) / ( P ) 0.559 1C ! 0.058 (C,D)

N(PHI) / ( MC/(Rm**2 * Beta) ) 0.559 3A ! 0.245 (A,B,C,D)

M(PHI) / ( MC/(Rm * Beta) ) 0.559 1A ! 0.086 (A,B,C,D)

N(PHI) / ( ML/(Rm**2 * Beta) ) 0.559 3B ! 0.588 (A,B,C,D)

M(PHI) / ( ML/(Rm * Beta) ) 0.559 1B ! 0.028 (A,B,C,D)

N(x) / ( P/Rm ) 0.559 3C ! 0.603 (A,B)

N(x) / ( P/Rm ) 0.559 4C ! 0.749 (C,D)

M(x) / ( P ) 0.559 1C1 ! 0.059 (A,B)

M(x) / ( P ) 0.559 2C ! 0.039 (C,D)

N(x) / ( MC/(Rm**2 * Beta) ) 0.559 4A ! 0.487 (A,B,C,D)

M(x) / ( MC/(Rm * Beta) ) 0.559 2A ! 0.051 (A,B,C,D)

N(x) / ( ML/(Rm**2 * Beta) ) 0.559 4B ! 0.216 (A,B,C,D)

M(x) / ( ML/(Rm * Beta) ) 0.559 2B ! 0.053 (A,B,C,D)

Note - The ! mark next to the figure name denotes curve value exceeded.

Stress Concentration Factors Kn = 1.00, Kb = 1.00

Stresses in the Vessel at the Edge of Reinforcing Pad

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.4 0.4 -0.4 -0.4 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.5 -0.5 -0.5 0.5 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 8
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

| |

Tot. Circ. Str.| 0.9 -0.1 -0.9 0.1 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Bend. ML | 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 1.1 -0.8 -1.1 0.8 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 -0.3 -0.3 0.3 0.3|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 -0.3 -0.3 0.3 0.3|

-------------------------------------------------------------------------

Str. Int. | 1.1 0.8 1.1 0.8 0.6 0.6 0.6 0.6|

WRC 107 Stress Calculation for OCCasional loads:

Radial Load P 433.5 N

Circumferential Shear VC 0.0 N

Longitudinal Shear VL 1033.1 N

Circumferential Moment MC -86075.4 N-mm

Longitudinal Moment ML -205146.5 N-mm

Torsional Moment MT 0.0 N-mm

Dimensionless Parameters used : Gamma = 5.00 ( 3.17)

Stress Concentration Factors Kn = 1.00, Kb = 1.00

Stresses in the Vessel at the Attachment Junction

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 9
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Circ. Str.| 0.0 0.0 -0.1 0.0 0.0 0.0 -0.1 0.1|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. ML | 0.1 -0.1 -0.1 0.1 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 0.0 0.0 -0.1 0.1 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Str. Int. | 0.0 0.0 0.1 0.1 0.0 0.0 0.1 0.1|

Dimensionless Parameters used : Gamma = 5.00 ( 4.09)

Stress Concentration Factors Kn = 1.00, Kb = 1.00

Stresses in the Vessel at the Edge of Reinforcing Pad

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 10
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Circ. Str.| 0.0 0.0 -0.1 0.0 0.0 0.0 -0.1 0.0|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 0.0 0.0 -0.1 0.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Str. Int. | 0.0 0.0 0.1 0.0 0.0 0.0 0.1 0.0|

WRC 107/537 Stress Summations:

Vessel Stress Summation at Attachment Junction

Type of Stress Values at |

Stress Int. (MPa ) |

Location Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Pm (SUS) 155.3 224.2 155.3 224.2 155.3 224.2 155.3 224.2|

Circ. Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Pm(TOTAL) 155.3 224.2 155.3 224.2 155.3 224.2 155.3 224.2|

Circ. Pl (SUS) 0.5 0.5 -0.5 -0.5 0.0 0.0 0.0 0.0|

Circ. Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Pl(TOTAL) 0.5 0.5 -0.5 -0.5 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 11
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Circ. Q (SUS) 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

Circ. Q (OCC) 0.0 0.0 -0.1 0.1 0.0 0.0 -0.1 0.1|

Circ. Q (TOTAL) 0.9 -0.9 -0.9 0.9 0.0 0.0 -0.1 0.1|

-------------------------------------------------------------------------

Long. Pm (SUS) 77.6 77.6 77.6 77.6 77.6 77.6 77.6 77.6|

Long. Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Pm(TOTAL) 77.6 77.6 77.6 77.6 77.6 77.6 77.6 77.6|

Long. Pl (SUS) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Pl(TOTAL) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Q (SUS) 1.2 -1.2 -1.2 1.2 0.0 0.0 0.0 0.0|

Long. Q (OCC) 0.0 0.0 -0.1 0.1 0.0 0.0 0.0 0.0|

Long. Q (TOTAL) 1.2 -1.2 -1.3 1.3 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm(TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pl (SUS) 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

Shear Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pl(TOTAL) 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Pm (SUS) 155.3 224.2 155.3 224.2 155.3 224.2 155.3 224.2|

-------------------------------------------------------------------------

Pm (SUS+OCC) 155.3 224.2 155.3 224.2 155.3 224.2 155.3 224.2|

-------------------------------------------------------------------------

Pm+Pl (SUS) 155.7 224.7 154.8 223.8 155.3 224.2 155.3 224.2|

-------------------------------------------------------------------------

Pm+Pl (SUS+OCC) 155.7 224.7 154.8 223.8 155.3 224.2 155.3 224.2|

-------------------------------------------------------------------------

Pm+Pl+Q (Total) 156.6 223.8 153.8 224.7 155.3 224.2 155.2 224.3|

Stress Summation Comparison:

Type of | Max. S.I. S.I. Allowable | Result |

Stress Int. | MPa | |

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 12
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

-------------------------------------------------------------------------

Pm (SUS) | 224.23 287.30 | Passed |

Pm (SUS+OCC) | 224.23 344.76 | Passed |

Pm+Pl (SUS) | 224.68 430.95 | Passed |

Pm+Pl (SUS+OCC)| 224.69 517.14 | Passed |

Pm+Pl+Q (TOTAL)| 224.70 861.90 | Passed |

WRC 107/537 Stress Summations:

Vessel Stress Summation at Reinforcing Pad Edge

Type of Stress Values at |

Stress Int. (MPa ) |

Location Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Pm (SUS) 217.2 286.2 217.2 286.2 217.2 286.2 217.2 286.2|

Circ. Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Pm(TOTAL) 217.2 286.2 217.2 286.2 217.2 286.2 217.2 286.2|

Circ. Pl (SUS) 0.4 0.4 -0.4 -0.4 0.0 0.0 0.0 0.0|

Circ. Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Pl(TOTAL) 0.4 0.4 -0.5 -0.5 0.0 0.0 0.0 0.0|

Circ. Q (SUS) 0.5 -0.5 -0.5 0.5 0.0 0.0 0.0 0.0|

Circ. Q (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Q (TOTAL) 0.5 -0.5 -0.5 0.5 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Pm (SUS) 108.6 108.6 108.6 108.6 108.6 108.6 108.6 108.6|

Long. Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Pm(TOTAL) 108.6 108.6 108.6 108.6 108.6 108.6 108.6 108.6|

Long. Pl (SUS) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Pl(TOTAL) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Q (SUS) 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

Long. Q (OCC) 0.0 0.0 -0.1 0.1 0.0 0.0 0.0 0.0|

Long. Q (TOTAL) 1.0 -1.0 -1.0 1.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm(TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 13
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Ope : Lugs: 2 12:44pm Sep 28,2016

Shear Pl (SUS) 0.0 0.0 0.0 0.0 -0.3 -0.3 0.3 0.3|

Shear Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pl(TOTAL) 0.0 0.0 0.0 0.0 -0.3 -0.3 0.3 0.3|

Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Pm (SUS) 217.2 286.2 217.2 286.2 217.2 286.2 217.2 286.2|

-------------------------------------------------------------------------

Pm (SUS+OCC) 217.2 286.2 217.2 286.2 217.2 286.2 217.2 286.2|

-------------------------------------------------------------------------

Pm+Pl (SUS) 217.7 286.6 216.8 285.8 217.2 286.2 217.2 286.2|

-------------------------------------------------------------------------

Pm+Pl (SUS+OCC) 217.7 286.6 216.8 285.8 217.2 286.2 217.2 286.2|

-------------------------------------------------------------------------

Pm+Pl+Q (Total) 218.2 286.1 216.3 286.3 217.2 286.2 217.2 286.2|

Stress Summation Comparison:

Type of | Max. S.I. S.I. Allowable | Result |

Stress Int. | MPa | |

-------------------------------------------------------------------------

Pm (SUS) | 286.21 287.30 | Passed |

Pm (SUS+OCC) | 286.21 344.76 | Passed |

Pm+Pl (SUS) | 286.63 430.95 | Passed |

Pm+Pl (SUS+OCC)| 286.64 517.14 | Passed |

Pm+Pl+Q (TOTAL)| 286.29 861.90 | Passed |

PV Elite is a trademark of Intergraph CADWorx & Analysis Solutions, Inc. 2016

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 14
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Support Lug Calculations: Test Case

INPUT ECHO OF SUPPORT LUG INPUT

Type of Geometry : Gussets with No Top Plate

Number of Support Lugs Nlug 3

Distance from Vessel OD to Lug Contact Point Dlug 198.5000 mm

Lug Support Force Bearing Width Wfb 200.0000 mm

Lug Material AISI 4130

Lug Yield Stress 517.12 MPa

Radial Width of bottom Support Lug Plate Wpl 350.0000 mm

Effective Force Bearing Length Lpl 340.0000 mm

Thickness of bottom Support Lug Plate Tpl 20.0000 mm

Distance between Gussets Dgp 240.0000 mm

Mean Width of Gusset Plate Wgp 200.0000 mm

Height of Gusset Plate Hgp 330.0000 mm

Thickness of Gusset Plate Tgp 20.0000 mm

Pad Width along Circumference C11P 400.000 mm

Pad Length along Vessel Axis C22P 400.000 mm

Pad Thickness Tpad 30.000 mm

Bolt Material SA-193 B7

Bolt Allowable Stress at Design Temperature 172.38 MPa

Thread Series TEMA

Bolt Diameter 41.28 mm

Results for Support Lugs: Description: LUG SUPPORT

Overturning Moment at Support Lug 0. N-mm

Weight Load at the top of one Lug 26382. N

Force on one Lug, Test Condition [Flug]:

= ( W/Nlug + Mlug/( Rlug * Nlug/2 ) )

= ( 79146/3 + 0/( 600.00 * 3/2 ))

= 26382.12 N
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 15
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Bearing Area [Ba]:

= Lpl * Wfb

= 340.000 * 200.000

= 0.07 m²

Bending Stress in bottom Plate (Unif. Load) Per Bednar p.156 [Spl2]:

= Beta1 * Flug/Ba * Wfb² / Tpl² per Roark & Young 5th Ed.

= 0.768 * 26382.1/0.068 * 200.000²/20.000²

= 29.81 MPa

Bottom Plate Required Thickness (Uniform Load) 5.8812 mm

Bottom Plate Required Thickness based on ADM S 3/4 [trAD]:

= 0.71 * Dgp(( Flug / ( Lpl * Wfb ))/Spa )½

= 0.71*240.00((26382/(340.00*200.00))/344.750)½

= 5.717 mm

Note: If using the AD Code recommendations, the force bearing width (Wfb) must

be greater than or equal to 1/3 of the bottom plate radial width (Wpl)

plus the pad thickness (Padthk), if there is a pad.

Bottom Support Plate Allowable Stress [Spa]:

= 2/3 * Ylug

= 2/3 * 517

= 344.75 MPa

Gusset Plate Axial Stress ( Force / Gusset Plate Area ) [Sgp]:

= ( Flug/2 )/( Wgp * Tgp )

= ( 26382/2 )/( 200.000 *20.0000 )

= 3.30 MPa

Required Thickness of Gussets per AISC 4.7929 mm

Gusset Plate Allowable Stress [Sga]:

= ( 1-(Klr)²/(2*Cc²))*Fy /( 5/3+3*(Klr)/(8*Cc)-(Klr³)/(8*Cc³)

= ( 1-( 66.00 )²/(2 * 87.96² )) * 517/

( 5/3+3*(66.00 )/(8* 87.96 )-( 66.00³)/(8*87.96³)

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 16
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

= 196.05 MPa

Maximum Compressive Gusset Plate Stress per Bednar [SgpB]:

= Flug*( 3*Dlug-Wpl )/( Tgp* Wpl² * (sin(Alph_G))² )

= 26382 *( 3*198.500 -350.000 )/( 20.0000 *350.000²*(sin(47.73 ))² )

= 4.83 MPa

Gusset Plate Allowable Compressive Stress [SgaB]:

= 18000/(1+(1/18000)*( Hgp/sin(Alph_G)/(0.289*Tgp))² )

= 18000/(1+(1/18000)* (330.000/sin(47.73 )/(0.289*20.0000 ))² )

= 93.26 MPa

Note :

There was no uplift. Please choose an appropriate bolt

size for this support design.

Input Echo, WRC107/537 Item 1, Description: LUG SUPPORT

Diameter Basis for Vessel Vbasis ID

Cylindrical or Spherical Vessel Cylsph Cylindrical

Internal Corrosion Allowance Cas 0.0000 mm

Vessel Diameter Dv 625.000 mm

Vessel Thickness Tv 89.000 mm

Design Temperature 21.11 °C

Attachment Type Type Rectangular

Parameter C11 C11 144.00 mm

Parameter C22 C22 264.00 mm

Thickness of Reinforcing Pad Tpad 30.000 mm

Pad Parameter C11P C11p 400.000 mm

Pad Parameter C22P C22p 400.000 mm

Design Internal Pressure Dp 68.970 MPa

Include Pressure Thrust No

Vessel Centerline Direction Cosine Vx 0.000

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 17
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Vessel Centerline Direction Cosine Vy 1.000

Vessel Centerline Direction Cosine Vz 0.000

Nozzle Centerline Direction Cosine Nx 1.000

Nozzle Centerline Direction Cosine Ny 0.000

Nozzle Centerline Direction Cosine Nz 0.000

Global Force (SUS) Fx 0.0 N

Global Force (SUS) Fy 22681.1 N

Global Force (SUS) Fz 0.0 N

Global Moment (SUS) Mx 0.0 N-mm

Global Moment (SUS) My 0.0 N-mm

Global Moment (SUS) Mz 4504027.0 N-mm

Internal Pressure (SUS) P 68.97 MPa

Include Pressure Thrust No

Global Force (OCC) Fx 0.0 N

Global Force (OCC) Fy 3701.0 N

Global Force (OCC) Fz 0.0 N

Global Moment (OCC) Mx 0.0 N-mm

Global Moment (OCC) My 0.0 N-mm

Global Moment (OCC) Mz 734947.2 N-mm

Occasional Internal Pressure (OCC) Pvar 32.05 MPa

Use Interactive Control No

WRC107 Version Version March 1979

Include Pressure Stress Indices per Div. 2 No

Compute Pressure Stress per WRC-368 No

Note:

WRC Bulletin 537 provides equations for the dimensionless curves

found in bulletin 107. As noted in the foreword to bulletin 537,

"537 is equivalent to WRC 107". Where 107 is printed in the

results below, "537" can be interchanged with "107".

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 18
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

WRC 107 Stress Calculation for SUStained loads:

Radial Load P 0.0 N

Circumferential Shear VC 0.0 N

Longitudinal Shear VL 22681.1 N

Circumferential Moment MC 0.0 N-mm

Longitudinal Moment ML -4504027.0 N-mm

Torsional Moment MT 0.0 N-mm

Dimensionless Parameters used : Gamma = 5.00 ( 3.13)

Dimensionless Loads for Cylindrical Shells at Attachment Junction:

-------------------------------------------------------------------

Curves read for 1979 Beta Figure Value Location

-------------------------------------------------------------------

N(PHI) / ( P/Rm ) 0.338 4C ! 0.861 (A,B)

N(PHI) / ( P/Rm ) 0.338 3C ! 0.765 (C,D)

M(PHI) / ( P ) 0.243 2C1 ! 0.097 (A,B)

M(PHI) / ( P ) 0.243 1C ! 0.123 (C,D)

N(PHI) / ( MC/(Rm**2 * Beta) ) 0.237 3A ! 0.139 (A,B,C,D)

M(PHI) / ( MC/(Rm * Beta) ) 0.259 1A ! 0.098 (A,B,C,D)

N(PHI) / ( ML/(Rm**2 * Beta) ) 0.290 3B ! 0.542 (A,B,C,D)

M(PHI) / ( ML/(Rm * Beta) ) 0.277 1B ! 0.047 (A,B,C,D)

N(x) / ( P/Rm ) 0.294 3C ! 0.816 (A,B)

N(x) / ( P/Rm ) 0.294 4C ! 0.890 (C,D)

M(x) / ( P ) 0.302 1C1 ! 0.104 (A,B)

M(x) / ( P ) 0.302 2C ! 0.077 (C,D)

N(x) / ( MC/(Rm**2 * Beta) ) 0.237 4A ! 0.208 (A,B,C,D)

M(x) / ( MC/(Rm * Beta) ) 0.319 2A ! 0.056 (A,B,C,D)

N(x) / ( ML/(Rm**2 * Beta) ) 0.290 4B ! 0.163 (A,B,C,D)

M(x) / ( ML/(Rm * Beta) ) 0.322 2B ! 0.072 (A,B,C,D)

Note - The ! mark next to the figure name denotes curve value exceeded.

Stress Concentration Factors Kn = 1.00, Kb = 1.00

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 19
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Stresses in the Vessel at the Attachment Junction

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.4 0.4 -0.4 -0.4 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

| |

Tot. Circ. Str.| 1.3 -0.4 -1.3 0.4 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Bend. ML | 1.2 -1.2 -1.2 1.2 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 1.3 -1.0 -1.3 1.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

-------------------------------------------------------------------------

Str. Int. | 1.3 1.0 1.3 1.0 0.7 0.7 0.7 0.7|

Dimensionless Parameters used : Gamma = 5.00 ( 4.01)

Dimensionless Loads for Cylindrical Shells at Pad edge:

-------------------------------------------------------------------

Curves read for 1979 Beta Figure Value Location

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 20
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

-------------------------------------------------------------------

N(PHI) / ( P/Rm ) 0.560 4C ! 0.749 (A,B)

N(PHI) / ( P/Rm ) 0.560 3C ! 0.603 (C,D)

M(PHI) / ( P ) 0.560 2C1 ! 0.040 (A,B)

M(PHI) / ( P ) 0.560 1C ! 0.058 (C,D)

N(PHI) / ( MC/(Rm**2 * Beta) ) 0.560 3A ! 0.245 (A,B,C,D)

M(PHI) / ( MC/(Rm * Beta) ) 0.560 1A ! 0.086 (A,B,C,D)

N(PHI) / ( ML/(Rm**2 * Beta) ) 0.560 3B ! 0.588 (A,B,C,D)

M(PHI) / ( ML/(Rm * Beta) ) 0.560 1B ! 0.028 (A,B,C,D)

N(x) / ( P/Rm ) 0.560 3C ! 0.603 (A,B)

N(x) / ( P/Rm ) 0.560 4C ! 0.749 (C,D)

M(x) / ( P ) 0.560 1C1 ! 0.059 (A,B)

M(x) / ( P ) 0.560 2C ! 0.039 (C,D)

N(x) / ( MC/(Rm**2 * Beta) ) 0.560 4A ! 0.487 (A,B,C,D)

M(x) / ( MC/(Rm * Beta) ) 0.560 2A ! 0.051 (A,B,C,D)

N(x) / ( ML/(Rm**2 * Beta) ) 0.560 4B ! 0.216 (A,B,C,D)

M(x) / ( ML/(Rm * Beta) ) 0.560 2B ! 0.053 (A,B,C,D)

Note - The ! mark next to the figure name denotes curve value exceeded.

Stress Concentration Factors Kn = 1.00, Kb = 1.00

Stresses in the Vessel at the Edge of Reinforcing Pad

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.4 0.4 -0.4 -0.4 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.5 -0.5 -0.5 0.5 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 21
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

| |

Tot. Circ. Str.| 0.9 -0.1 -0.9 0.1 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Bend. ML | 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 1.1 -0.8 -1.1 0.8 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 -0.3 -0.3 0.3 0.3|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 -0.3 -0.3 0.3 0.3|

-------------------------------------------------------------------------

Str. Int. | 1.1 0.8 1.1 0.8 0.6 0.6 0.6 0.6|

WRC 107 Stress Calculation for OCCasional loads:

Radial Load P 0.0 N

Circumferential Shear VC 0.0 N

Longitudinal Shear VL 3701.0 N

Circumferential Moment MC 0.0 N-mm

Longitudinal Moment ML -734947.2 N-mm

Torsional Moment MT 0.0 N-mm

Dimensionless Parameters used : Gamma = 5.00 ( 3.13)

Stress Concentration Factors Kn = 1.00, Kb = 1.00

Stresses in the Vessel at the Attachment Junction

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 22
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.1 0.1 -0.1 -0.1 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.1 -0.1 -0.1 0.1 0.0 0.0 0.0 0.0|

| |

Tot. Circ. Str.| 0.2 -0.1 -0.2 0.1 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. ML | 0.2 -0.2 -0.2 0.2 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 0.2 -0.2 -0.2 0.2 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 -0.1 -0.1 0.1 0.1|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 -0.1 -0.1 0.1 0.1|

-------------------------------------------------------------------------

Str. Int. | 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1|

Dimensionless Parameters used : Gamma = 5.00 ( 4.01)

Stress Concentration Factors Kn = 1.00, Kb = 1.00

Stresses in the Vessel at the Edge of Reinforcing Pad

| Stress Values at |

| ( MPa) |

Type of | |

Stress Load| Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 23
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Circ. Memb. ML | 0.1 0.1 -0.1 -0.1 0.0 0.0 0.0 0.0|

Circ. Bend. ML | 0.1 -0.1 -0.1 0.1 0.0 0.0 0.0 0.0|

| |

Tot. Circ. Str.| 0.1 0.0 -0.1 0.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Memb. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. P | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. MC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Memb. ML | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Bend. ML | 0.1 -0.1 -0.1 0.1 0.0 0.0 0.0 0.0|

| |

Tot. Long. Str.| 0.2 -0.1 -0.2 0.1 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear VC | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear VL | 0.0 0.0 0.0 0.0 -0.1 -0.1 0.1 0.1|

Shear MT | 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

| |

Tot. Shear| 0.0 0.0 0.0 0.0 -0.1 -0.1 0.1 0.1|

-------------------------------------------------------------------------

Str. Int. | 0.2 0.1 0.2 0.1 0.1 0.1 0.1 0.1|

WRC 107/537 Stress Summations:

Vessel Stress Summation at Attachment Junction

Type of Stress Values at |

Stress Int. (MPa ) |

Location Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Pm (SUS) 152.1 221.1 152.1 221.1 152.1 221.1 152.1 221.1|

Circ. Pm (OCC) 70.7 102.7 70.7 102.7 70.7 102.7 70.7 102.7|

Circ. Pm(TOTAL) 222.8 323.9 222.8 323.9 222.8 323.9 222.8 323.9|

Circ. Pl (SUS) 0.4 0.4 -0.4 -0.4 0.0 0.0 0.0 0.0|

Circ. Pl (OCC) 0.1 0.1 -0.1 -0.1 0.0 0.0 0.0 0.0|

Circ. Pl(TOTAL) 0.5 0.5 -0.5 -0.5 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 24
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Circ. Q (SUS) 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

Circ. Q (OCC) 0.1 -0.1 -0.1 0.1 0.0 0.0 0.0 0.0|

Circ. Q (TOTAL) 1.0 -1.0 -1.0 1.0 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Pm (SUS) 76.1 76.1 76.1 76.1 76.1 76.1 76.1 76.1|

Long. Pm (OCC) 35.3 35.3 35.3 35.3 35.3 35.3 35.3 35.3|

Long. Pm(TOTAL) 111.4 111.4 111.4 111.4 111.4 111.4 111.4 111.4|

Long. Pl (SUS) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Pl(TOTAL) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Q (SUS) 1.2 -1.2 -1.2 1.2 0.0 0.0 0.0 0.0|

Long. Q (OCC) 0.2 -0.2 -0.2 0.2 0.0 0.0 0.0 0.0|

Long. Q (TOTAL) 1.3 -1.3 -1.3 1.3 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm(TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pl (SUS) 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

Shear Pl (OCC) 0.0 0.0 0.0 0.0 -0.1 -0.1 0.1 0.1|

Shear Pl(TOTAL) 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Pm (SUS) 152.1 221.1 152.1 221.1 152.1 221.1 152.1 221.1|

-------------------------------------------------------------------------

Pm (SUS+OCC) 222.8 323.9 222.8 323.9 222.8 323.9 222.8 323.9|

-------------------------------------------------------------------------

Pm+Pl (SUS) 152.6 221.6 151.7 220.7 152.2 221.1 152.2 221.1|

-------------------------------------------------------------------------

Pm+Pl (SUS+OCC) 223.4 324.4 222.3 323.3 222.8 323.9 222.8 323.9|

-------------------------------------------------------------------------

Pm+Pl+Q (Total) 224.4 323.4 221.3 324.3 222.8 323.9 222.8 323.9|

Stress Summation Comparison:

Type of | Max. S.I. S.I. Allowable | Result |

Stress Int. | MPa | |

PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 25
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

-------------------------------------------------------------------------

Pm (SUS) | 221.12 287.30 | Passed |

Pm (SUS+OCC) | 323.86 344.76 | Passed |

Pm+Pl (SUS) | 221.57 430.95 | Passed |

Pm+Pl (SUS+OCC)| 324.38 517.14 | Passed |

Pm+Pl+Q (TOTAL)| 324.34 861.90 | Passed |

WRC 107/537 Stress Summations:

Vessel Stress Summation at Reinforcing Pad Edge

Type of Stress Values at |

Stress Int. (MPa ) |

Location Au Al Bu Bl Cu Cl Du Dl |

-------------------------------------------------------------------------

Circ. Pm (SUS) 212.0 281.0 212.0 281.0 212.0 281.0 212.0 281.0|

Circ. Pm (OCC) 98.5 130.5 98.5 130.5 98.5 130.5 98.5 130.5|

Circ. Pm(TOTAL) 310.5 411.5 310.5 411.5 310.5 411.5 310.5 411.5|

Circ. Pl (SUS) 0.4 0.4 -0.4 -0.4 0.0 0.0 0.0 0.0|

Circ. Pl (OCC) 0.1 0.1 -0.1 -0.1 0.0 0.0 0.0 0.0|

Circ. Pl(TOTAL) 0.5 0.5 -0.5 -0.5 0.0 0.0 0.0 0.0|

Circ. Q (SUS) 0.5 -0.5 -0.5 0.5 0.0 0.0 0.0 0.0|

Circ. Q (OCC) 0.1 -0.1 -0.1 0.1 0.0 0.0 0.0 0.0|

Circ. Q (TOTAL) 0.6 -0.6 -0.6 0.6 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Long. Pm (SUS) 106.0 106.0 106.0 106.0 106.0 106.0 106.0 106.0|

Long. Pm (OCC) 49.2 49.2 49.2 49.2 49.2 49.2 49.2 49.2|

Long. Pm(TOTAL) 155.2 155.2 155.2 155.2 155.2 155.2 155.2 155.2|

Long. Pl (SUS) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Pl (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Long. Pl(TOTAL) 0.2 0.2 -0.2 -0.2 0.0 0.0 0.0 0.0|

Long. Q (SUS) 0.9 -0.9 -0.9 0.9 0.0 0.0 0.0 0.0|

Long. Q (OCC) 0.1 -0.1 -0.1 0.1 0.0 0.0 0.0 0.0|

Long. Q (TOTAL) 1.1 -1.1 -1.1 1.1 0.0 0.0 0.0 0.0|

-------------------------------------------------------------------------

Shear Pm (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Pm(TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|
PV Elite 2016 Licensee: HEAVY EQUIPMENT MAINTENANCE TRADING CO. LLC 26
FileName : Sand catcher 10K Rev.0
Sup. Lug Calcs: Test : Step: 20 12:44pm Sep 28,2016

Shear Pl (SUS) 0.0 0.0 0.0 0.0 -0.3 -0.3 0.3 0.3|

Shear Pl (OCC) 0.0 0.0 0.0 0.0 -0.1 -0.1 0.1 0.1|

Shear Pl(TOTAL) 0.0 0.0 0.0 0.0 -0.4 -0.4 0.4 0.4|

Shear Q (SUS) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (OCC) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Shear Q (TOTAL) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0|

Pm (SUS) 212.0 281.0 212.0 281.0 212.0 281.0 212.0 281.0|

-------------------------------------------------------------------------

Pm (SUS+OCC) 310.5 411.5 310.5 411.5 310.5 411.5 310.5 411.5|

-------------------------------------------------------------------------

Pm+Pl (SUS) 212.4 281.4 211.6 280.5 212.0 281.0 212.0 281.0|

-------------------------------------------------------------------------

Pm+Pl (SUS+OCC) 311.0 412.0 310.0 411.0 310.5 411.5 310.5 411.5|

-------------------------------------------------------------------------

Pm+Pl+Q (Total) 311.5 411.4 309.4 411.6 310.5 411.5 310.5 411.5|

Stress Summation Comparison:

Type of | Max. S.I. S.I. Allowable | Result |

Stress Int. | MPa | |

-------------------------------------------------------------------------

Pm (SUS) | 280.95 287.30 | Passed |

Pm (SUS+OCC) | 411.50 344.76 | Failed |

Pm+Pl (SUS) | 281.37 430.95 | Passed |

Pm+Pl (SUS+OCC)| 411.98 517.14 | Passed |

Pm+Pl+Q (TOTAL)| 411.57 861.90 | Passed |

PV Elite is a trademark of Intergraph CADWorx & Analysis Solutions, Inc. 2016