Scribd
Upload
2K views

Classification of Composites

Composite materials are composed of two or more distinct phases that provide bulk properties different from the individual components. The primary phase is called the matrix, which is usually more ductile and holds the dispersed reinforcing phase. The reinforcing phase is stronger but less abundant. Composites are classified based on their matrix material as metal matrix composites, ceramic matrix composites, or polymer matrix composites. They are also classified based on the structure of the reinforcing material as particulate composites, fibrous composites, or laminate composites.

Uploaded by

Pushkar Mishra
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views

Classification of Composites

Composite materials are composed of two or more distinct phases that provide bulk properties different from the individual components. The primary phase is called the matrix, which is usually more ductile and holds the dispersed reinforcing phase. The reinforcing phase is stronger but less abundant. Composites are classified based on their matrix material as metal matrix composites, ceramic matrix composites, or polymer matrix composites. They are also classified based on the structure of the reinforcing material as particulate composites, fibrous composites, or laminate composites.

Uploaded by

Pushkar Mishra
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Classification of composites

Definition:
Composite material is a material composed of two or more distinct phases (matrix phase and
dispersed phase) and having bulk properties significantly different form those of any of the
constituents.

 Matrix phase

The primary phase, having a continuous character, is called matrix. Matrix is usually more
ductile and less hard phase. It holds the dispersed phase and shares a load with it.

 Dispersed (reinforcing) phase

The second phase (or phases) is embedded in the matrix in a discontinuous form. This
secondary phase is called dispersed phase. Dispersed phase is usually stronger than the
matrix, therefore it is sometimes called reinforcing phase.

Many of common materials (metal alloys, doped Ceramics and Polymers mixed with
additives) also have a small amount of dispersed phases in their structures, however they are
not considered as composite materials since their properties are similar to those of their base
constituents (physical properties of steel are similar to those of pure iron).

There are two classification systems of composite materials. One of them is based on the
matrix material (metal, ceramic, polymer) and the second is based on the material structure:

Classification of composites I

(based on matrix material)

Metal Matrix Composites (MMC)

Metal Matrix Composites are composed of a metallic matrix (aluminum, magnesium, iron,
cobalt, copper) and a dispersed ceramic (oxides, carbides) or metallic (lead, tungsten,
molybdenum) phase.

Ceramic Matrix Composites (CMC)

Ceramic Matrix Composites are composed of a ceramic matrix and embedded fibers of other
ceramic material (dispersed phase).

Polymer Matrix Composites (PMC)

Polymer Matrix Composites are composed of a matrix from thermoset (Unsaturated Polyester
(UP), Epoxiy (EP)) or thermoplastic (Polycarbonate (PC), Polyvinylchloride, Nylon,
Polysterene) and embedded glass, carbon, steel or Kevlar fibers (dispersed phase).

Classification of composite materials II


(based on reinforcing material structure)

Particulate Composites

Particulate Composites consist of a matrix reinforced by a dispersed phase in form of


particles.

1. Composites with random orientation of particles.


2. Composites with preferred orientation of particles. Dispersed phase of these
materials consists of two-dimensional flat platelets (flakes), laid parallel to each other.

Fibrous Composites

1. Short-fiber reinforced composites. Short-fiber reinforced composites consist of a


matrix reinforced by a dispersed phase in form of discontinuous fibers (length <
100*diameter).
1. Composites with random orientation of fibers.
2. Composites with preferred orientation of fibers.
2. Long-fiber reinforced composites. Long-fiber reinforced composites consist of a
matrix reinforced by a dispersed phase in form of continuous fibers.
1. Unidirectional orientation of fibers.
2. Bidirectional orientation of fibers (woven).

Laminate Composites

When a fiber reinforced composite consists of several layers with different fiber orientations,
it is called multilayer (angle-ply) composite.

You might also like