Vent I VRF Specifikacija Opreme
Vent I VRF Specifikacija Opreme
2. Specifications
Type ARTCOOL Gallery
Model Unit ARNU12GSF14
kW 3.6
Cooling Capacity kcal/h 3,100
Btu/h 12,300
kW 4.0
Heating Capacity kcal/h 3,400
Btu/h 13,600
Power Input (H / M / L) W 32 / 20 / 12
Dimensions mm 600 x 600 x 146
Body
(W x H x D) inch 23-5/8 x 23-5/8 x 5-25/32
Rows x Columns x FPI 2x20x21
Coil
Face Area m² 0.18
Type Turbo Fan
Motor Output x Number W 30
Running Current A 0.16
Fan Air Flow Rate m³/min 9.3 / 7.7 / 6.0
(H / M / L) ft³/min 328 / 272 / 212
Drive Direct
Motor type BLDC
Temperature Control Microprocessor, Thermostat for cooling and heating
Sound Absorbing Thermal Insulation Material Foamed polystrene
Air Filter Resin Net(washable)
Safety Device Fuse
Liquid Side mm (inch) Ø6.35(1/4)
Pipe Connections Gas Side mm (inch) Ø12.7(1/2)
Drain Pipe(Internal Dia.) mm (inch) 12.2(15/32)
Net Weight kg (lbs) 15(33.1)
Sound Pressure Level (H / M / L) dB(A) 44 / 38 / 32
Sound Power Level (H / M / L) dB(A) 54 / 46 / 38
1, 220-240, 50
Power Supply Ø, V, Hz
1, 220, 60
Refrigerant Control EEV
Transmission Cable mm² 1.0~1.5 x 2C
Front Panel Color 1: Kiss (Photo changeable)
Note
1. Due to our policy of innovation some specifications may be changed without notification.
2. Wiring cable size must comply with the applicable local and national code. And “Electric characteristics” chapter should be considered for electrical
work and design. Especially the power cable and circuit breaker should be selected in accordance with that.
3. Sound pressure level is measured on the rated condition in the anechoic rooms by ISO 3745 standard.
Sound power level is measured on the rated condition in the reverberation rooms by ISO 3741 standard.
Therefore, these values can be increased owing to ambient conditions during operation.
4. Capacities are net capacities and based on the following conditions. Refer to the Outdoor Unit Specifications for calculating the real capacity.
• Cooling : Indoot Ambient Temp. 27°CDB / 19°CWB, Outdoor Ambient Temp. 35°CDB / 24°CWB
• Heating : Indoot Ambient Temp. 20°CDB / 15°CWB, Outdoor Ambient Temp. 7°CDB / 6°CWB
• Interconnected Pipe is standard length and difference of Elevation (Outdoor ~ Indoor Unit) is Zero.
4
MULTI V Indoor Unit ARTCOOL (Gallery)
3. Dimensions
ARNU07GSF14 / ARNU09GSF14 / ARNU12GSF14
[Unit : mm]
5
MULTI V Indoor Unit Ceiling Concealed Duct (Low Static)
2. Specifications
Type Ceiling Concealed Duct (Low Static)
Model Unit ARNU09GL1G4 ARNU12GL2G4
kW 2.8 3.6
Cooling Capacity kcal/h 2,400 3,100
Btu/h 9,600 12,300
kW 3.2 4.0
Heating Capacity kcal/h 2,800 3,400
Btu/h 10,900 13,600
Power Input (H / M / L) W 39 / 29 / 24 41 / 34 / 29
Casing Galvanized Steel Plate Galvanized Steel Plate
mm 700 x 190 x 700 900 x 190 x 700
Dimensions(WxHxD) Body
inch 27-9/16 × 7-15/32 × 27-9/16 35-7/16 × 7-15/32 × 27-9/16
Rows x Columns x FPI 2 x 11 x 14 2 x 11 x 18
Coil
Face Area m² 0.12 0.17
Type Sirocco Fan Sirocco Fan
Motor Output x Number W 19 x 1 19 x 1, 5 x 1
Running Current A 0.4 0.76
Air Flow Rate (H / M / L) m³/min 9.0 / 7.0 / 5.5 10.0 / 8.5 / 7.0
(High static Mode-factory set) ft³/min 320 / 250 / 200 360 / 310 / 250
Fan External Static Pressure mmAq(Pa) 2.54 (25) 2.54 (25)
Air Flow Rate (H / M / L) m³/min 9.0 / 7.0 / 5.5 10.0 / 8.5 / 7.0
(Standard Mode) ft³/min 320 / 250 / 200 360 / 310 / 250
External Static Pressure mmAq(Pa) 0 (0) 0 (0)
Drive Direct Direct
Motor type BLDC BLDC
Temperature Control Microprocessor, Thermostat for cooling and heating
Sound Absorbing Thermal Insulation Material Foamed polystrene Foamed polystrene
Air Filter - -
Safety Device Fuse Fuse
Liquid Side mm(inch) Ø6.35(1/4) Ø6.35(1/4)
Pipe Connections Gas Side mm(inch) Ø12.7(1/2) Ø12.7(1/2)
Drain Pipe(Internal Dia.) mm(inch) 25.4(1) 25.4(1)
Net Weight kg(lbs) 17.5 (38.6) 23 (50.7)
Sound Pressure Levels (H / M / L) dB(A) 28 / 25 / 22 30 / 27 / 25
Sound Power Levels (H / M / L) dB(A) 53 / 49 / 45 50 / 47 / 46
1, 220 - 240, 50 1, 220 - 240, 50
Power Supply Ø, V, Hz
1, 220, 60 1, 220, 60
Refrigerant Control EEV EEV
Transmission cable mm² 1.0~1.5 x 2C 1.0~1.5 x 2C
Note
1. Due to our policy of innovation some specifications may be changed without notification.
2. Wiring cable size must comply with the applicable local and national code. And “Electric characteristics” chapter should be considered for electrical
work and design. Especially the power cable and circuit breaker should be selected in accordance with that.
3. Sound pressure level is measured on the rated condition in the anechoic rooms by ISO 3745 standard.
Sound power level is measured on the rated condition in the reverberation rooms by ISO 3741 standard.
Therefore, these values can be increased owing to ambient conditions during operation.
4. Capacities are net capacities and based on the following conditions. Refer to the Outdoor Unit Specifications for calculating the real capacity.
• Cooling : Indoot Ambient Temp. 27°CDB / 19°CWB, Outdoor Ambient Temp. 35°CDB / 24°CWB
• Heating : Indoot Ambient Temp. 20°CDB / 15°CWB, Outdoor Ambient Temp. 7°CDB / 6°CWB
• Interconnected Pipe is standard length and difference of Elevation (Outdoor ~ Indoor Unit) is Zero.
5. Sound levels are measured at 20Pa External Static Pressure condition.
4
MULTI V Indoor Unit
5
20 D
(unit: mm)
135
Chassis A B C D
34
190
100 L1 774 700 733 660
94
3. Dimensions & Gravity point
119
2
292
67
1
L3 1,174 1,100 1,133 1,060
3
(unit : mm)
700
628
Number Name Descripition
Unit size(5k,7k,9k,12k,18k) : 6.35
220
1 Liquid pipe connection Unit size(21k, 24k) : 9.52
4
Unit size(5k,7k,9k,12k,18k) : 12.7
2 Gas pipe connection Unit size(21k, 24k) : 15.88
L1 : 366 3 Drain pipe connection
L2 : 561
L3 : 755
ARNU15GL2G4 / ARNU18GL2G4 / ARNU21GL3G4/ ARNU24GL3G4
6
5 Air discharge
20
6 Air suction
Note
190
155
L1 : 75
L2 : 78
L3 : 81
7
MULTI V Indoor Unit Ceiling Concealed Duct (Low Static)
2. Specifications
Type Ceiling Concealed Duct (Low Static)
Model Unit ARNU15GL2G4 ARNU18GL2G4
kW 4.5 5.6
Cooling Capacity kcal/h 3,900 4,800
Btu/h 15,400 19,100
kW 5.0 6.3
Heating Capacity kcal/h 4,300 5,400
Btu/h 17,100 21,500
Power Input (H / M / L) W 56 / 41 / 34 71 / 56 / 41
Casing Galvanized Steel Plate Galvanized Steel Plate
mm 900 x 190 x 700 900 x 190 x 700
Dimensions(WxHxD) Body
inch 35-7/16 × 7-15/32 × 27-9/16 35-7/16 × 7-15/32 × 27-9/16
Rows x Columns x FPI 2 x 11 x 18 2 x 11 x 18
Coil
Face Area m² 0.17 0.17
Type Sirocco Fan Sirocco Fan
Motor Output x Number W 19 x 1, 5 x 1 19 x 1, 5 x 1
Running Current A 0.76 0.76
Air Flow Rate (H / M / L) m³/min 12.5 / 10.0 / 8.5 15.0 / 12.5 / 10.0
(High static Mode-factory set) ft³/min 450 / 360 / 310 530 / 450 / 360
Fan External Static Pressure mmAq(Pa) 2.54 (25) 2.54 (25)
Air Flow Rate (H / M / L) m³/min 12.5 / 10.0 / 8.5 15.0 / 12.5 / 10.0
(Standard Mode) ft³/min 450 / 360 / 310 530 / 450 / 360
External Static Pressure mmAq(Pa) 0 (0) 0 (0)
Drive Direct Direct
Motor type BLDC BLDC
Temperature Control Microprocessor, Thermostat for cooling and heating
Sound Absorbing Thermal Insulation Material Foamed polystrene Foamed polystrene
Air Filter - -
Safety Device Fuse Fuse
Liquid Side mm(inch) Ø6.35(1/4) Ø6.35(1/4)
Pipe Connections Gas Side mm(inch) Ø12.7(1/2) Ø12.7(1/2)
Drain Pipe(Internal Dia.) mm(inch) 25.4(1) 25.4(1)
Net Weight kg(lbs) 23 (50.7) 23 (50.7)
Sound Pressure Levels (H / M / L) dB(A) 33 / 30 / 28 35 / 32 / 29
Sound Power Levels (H / M / L) dB(A) 54 / 51 / 47 56 / 54 / 51
1, 220 - 240, 50 1, 220 - 240, 50
Power Supply Ø, V, Hz
1, 220, 60 1, 220, 60
Refrigerant Control EEV EEV
Transmission cable mm² 1.0~1.5 x 2C 1.0~1.5 x 2C
Note
1. Due to our policy of innovation some specifications may be changed without notification.
2. Wiring cable size must comply with the applicable local and national code. And “Electric characteristics” chapter should be considered for electrical
work and design. Especially the power cable and circuit breaker should be selected in accordance with that.
3. Sound pressure level is measured on the rated condition in the anechoic rooms by ISO 3745 standard.
Sound power level is measured on the rated condition in the reverberation rooms by ISO 3741 standard.
Therefore, these values can be increased owing to ambient conditions during operation.
4. Capacities are net capacities and based on the following conditions. Refer to the Outdoor Unit Specifications for calculating the real capacity.
• Cooling : Indoot Ambient Temp. 27°CDB / 19°CWB, Outdoor Ambient Temp. 35°CDB / 24°CWB
• Heating : Indoot Ambient Temp. 20°CDB / 15°CWB, Outdoor Ambient Temp. 7°CDB / 6°CWB
• Interconnected Pipe is standard length and difference of Elevation (Outdoor ~ Indoor Unit) is Zero.
5. Sound levels are measured at 20Pa External Static Pressure condition.
5
MULTI V Indoor Unit
5
20 D
(unit: mm)
135
Chassis A B C D
34
190
100 L1 774 700 733 660
94
3. Dimensions & Gravity point
119
2
292
67
1
L3 1,174 1,100 1,133 1,060
3
(unit : mm)
700
628
Number Name Descripition
Unit size(5k,7k,9k,12k,18k) : 6.35
220
1 Liquid pipe connection Unit size(21k, 24k) : 9.52
4
Unit size(5k,7k,9k,12k,18k) : 12.7
2 Gas pipe connection Unit size(21k, 24k) : 15.88
L1 : 366 3 Drain pipe connection
L2 : 561
L3 : 755
ARNU15GL2G4 / ARNU18GL2G4 / ARNU21GL3G4/ ARNU24GL3G4
6
5 Air discharge
20
6 Air suction
Note
190
155
L1 : 75
L2 : 78
L3 : 81
7
5. Specifications
5.2 With DX_coil
TECHNICAL SPECIFICATIONS LZ-H050GXN4 LZ-H080GXN4 LZ-H100GXN4
Refrigerant R410A
Phase 1 1 1
Power Supply Frequency Hz 50 / 60 50 / 60 50 / 60
Voltage V 220-240 / 220
Dimensions Height x Width x Depth mm 365 x 1,667 x 1,140 365 x 1,667 x 1,140 365 x 1,667 x 1,140
Fresh air Cooling (Note 2) kW 4.93 (1.23) 7.46 (1.84) 9.12 (2.53)
conditioning load Heating (Note 3) kW 6.73 (2.53) 9.80 (3.68) 11.72 (4.32)
Heat Super-high kW 0.25 0.42 0.48
exchange High kW 0.20 0.35 0.42
Power input mode Low kW 0.15 0.25 0.27
(normal) Super-high kW 0.25 0.42 0.48
Bypass High kW 0.20 0.35 0.42
mode 0.15 0.25 0.27
Low kW
Casing Material Galvanized steel plate
Weight Net kg 98 98 98
Fan Type Sirocco fan
Heat Super-high CMH 500 800 1,000
exchange High CMH 500 800 1,000
Air flow rate Mode Low CMH 440 640 820
(Note 5) Super-high CMH 500 800 1,000
Bypass High CMH 500 800 1,000
mode 440 640 820
Low CMH
External Super-high Pa 180 170 150
static High Pa 150 120 100
Fan pressure Low Pa 110 80 70
Quantity EA 2 2 2
Motor
Output W 195 195 195
Super-high % 86 80 76
Temperature
High % 86 80 76
exchange efficiency
Low % 87 81 78
Super-high % 61 50 45
Cooling High % 61 50 45
Enthalpy exchange Low % 63 53 50
efficiency Super-high % 76 67 64
Heating High % 76 67 64
Low % 77 69 66
Operation Range Outdoor air Temperature °C -15 ~ 45 -15 ~ 45 -15 ~ 45
Heat Super-high dB(A) 39 41 41
Exchange High dB(A) 37 38 39
Sound
mode Low dB(A) 35 36 36
Pressure
Super-high dB(A) 39 41 41
(Note 4) Bypass High dB(A) 37 38 39
mode Low dB(A) 35 36 36
Type Flare connection
Liquid
Diameter mm Ø6.35 Ø6.35 Ø6.35
Piping Type Flare connection
Gas
connection Diameter mm Ø12.7 Ø12.7 Ø12.7
Water Type -
Diameter mm - - -
Drain (Outer diameter) mm 25.4
Heat Super-high A 1.5 2.5 3.6
Exchange High A 1.3 2.0 3.2
Nominal
mode Low A 1.0 1.5 2.3
Running current
Super-high A 1.5 2.5 3.6
(RLA) Bypass High A 1.3 2.0 3.2
mode
Low A 1.0 1.5 2.3
Refrigerant control Electronic expansion valve
Insulation material Self-extinguishable urethane foam
Heat exchange system Air to air cross flow total heat (sensible + latent heat) exchange
Heat exchange element Specially processed non-flammable paper
Air Filter Multidirectional fibrous fleeces
Connection duct diameter mm Ø250 Ø250 Ø250
Operation mode Heat exchange mode, Bypass mode, Auto mode
Notes:
1. Cooling and heating capacities are based on the following conditions. For operation in a quiet room, it is required to take measures to lower the sound.
- Fan is based on High and Super-high. 5. Air flow rate can be changed over to low mode or high mode.
- The figures in the parenthesis indicate the heat reclaimed from the Energy recovery 6. Normal Amp., input, efficiency depend on the other above conditions.
ventilator. 7. The specifications, designs and information here are subject to change without
2. Cooling Capacity Test condition : notice.
Indoor temperature : 27°C DB, 19°C WB, Outdoor temperature : 35°C DB 8. Temperature exchange efficiency is the higher value of both cooling and heating.
3. Heating Capacity Test condition : 9. In heating operation, freezing of the outdoor unit's coil increases.Heating capability
Indoor temperature : 20°C DB, Outdoor temperature : 7°C DB, 6°C WB decreases and the system goes into defrost operation. During defrost operation, the
4. The operating sound measured at the point 1.5 m below the center of the unit is con- fans of the unit continues driving (factory setting). The purpose of this is to maintain
verted to that measured at an anechoic chamber built in accordance with the KS B the amount of ventilation and humidifying.
6879 conditions. The actual operating sound varies depending on the surrounding 10. This product contains Fluorinated Greenhouse Gases.
conditions(near running unit's sound, reflected sound and so on) and is normally
higher than this value.
1006
6. Dimensions
RA
EA
SA
Maintenance Cover
Inspection hatch
(150)
Electronic Parts Box 1400 X 600 Maintenance cover