Scribd
Upload
57 views

Footing A

The document describes the design of a footing for a column with a load of 690 kN. It provides the design parameters such as soil bearing capacity, grade of concrete and steel. It then calculates the required size, reinforcement and checks shear stress and bending moment to ensure the design is safe. The footing size is increased to a provided size of 1.85x1.93 m. The reinforcement is calculated and 13 bars of 10 mm diameter are required but 19 bars are provided to be safe. Shear and bending capacity are checked against demand to ensure the design is adequate.

Uploaded by

Praveen Cyssan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
57 views

Footing A

The document describes the design of a footing for a column with a load of 690 kN. It provides the design parameters such as soil bearing capacity, grade of concrete and steel. It then calculates the required size, reinforcement and checks shear stress and bending moment to ensure the design is safe. The footing size is increased to a provided size of 1.85x1.93 m. The reinforcement is calculated and 13 bars of 10 mm diameter are required but 19 bars are provided to be safe. Shear and bending capacity are checked against demand to ensure the design is adequate.

Uploaded by

Praveen Cyssan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 10

DESIGN OF FOOTING

Grade of concrete = 30 N/sq. mm Size of column breadth depth


Grade of steel = 500 N/sq.mm 0.3 0.45
Bearing capacity of soil = 200 kN/sq.m
Load on column = 690 kN xumax/d = 0.48
coefficient for BM = 4.138906
Area of footing required = 3.45 sq.m Required size = 1.783931 1.933931
size of square footing = 1.857418 m
Provided size 1.9 2.05 Offsetx = 0.8 m
Upward soil pressure intensity = 265.7253 kN/sq.m Offsety= 0.8 m
Bending moment along x direction = 161.561 kN-m
Bending moment along y direction = 174.3158 kN-m Maximum Bending moment =
Depth required = 205.2228 mm
Depth provided = 600 mm side depth = 150 mm Safe
Steel required = 697.99676 sq. mm
Along ly Effective depth = 544 mm 0.544
Steel required along lx = 754.4348 sq.mm
Dia of bars = 10 mm Dia of bars = 10
No. = 8.891678 No. No. required = 9.610634
Provided No. of bars = 13 No. Safe Provided bars = 13
Provided area of steel = 1020.5 sq.mm Provided area of steel =
Check for one way shear
Along ly Along lx
vertical offset (y) = 134.48533 mm vertical offset (y) = 134.4853
width of trapazium = 1538 mm width of trapazium = 1388
Area resisting shear = 516180.3 sq.mm Area resisting shear =
Percentage of steel provided = 0.187592 Percentage of steel provided =
Permissible shear stress = 0.324696 N/sq.mm Permissible shear stress =
Shear resisted = 167.60189 kN Shear resisted = 164.3269
Shear developed = 139.45263 kN Safe Shear developed = 129.2488

Check for two way shear

Depth = 277.376 mm
Shear force developed = 812.0735 kN
Beta = 0.666667
ks = 1.166667 ks= 1
permmissible shear stress = 1.369306 N/sq.mm
Actual shear stress = 1.369306 N/sq.mm
Shear force resisted = 1396.192 kN Safe

y
x
Axial force 701.1

1.9 0.15 12.66667


2.05 0.15 13.66667

Area provided = 3.895 sq.m


Safe

174.3158 kN-m

mm
No.
No. Safe
1020.5 sq. mm b

mm
mm
506093.9 sq. mm
0.187592
0.324696
kN
kN Safe

0.187592
0.25 0.5
0.35 0.46
0.32254

0.324696 18.56855 0.324696 18.56855


18.56855 18.56855
0.187592
0.25 0.5
0.35 0.46
0.32254
DESIGN OF FOOTING

DESIGN DATA

Grade of concrete = 15 N/sq. mm


Grade of steel = 415 N/sq.mm

Enter the values of factored load on column (Pu)= 743 KN

Enter The Factored S.B.C. of soil = 175 KN/sqM

Area of footing required = 4.25 sqM Rquired size of rectangular footing

Rquired size of rectangular footing

Provided size = 2 2.4 Offsetx = 0.885 m

Area provided of footing 4.8 SAFE

Upward soil pressure intensity = 232.19 kN/sq.m FACTORE 1.5

Bending moment along X direction = 255.99 kN-m


255.99
Bending moment along y direction = 218.23 kN-m

Depth required = 351.71 mm Depth provided = 600 mm

Dia of bars = 10 mm Effective depth = 545 mm

REQUIRED STEEL

ALONG X DIECTION = 1401.25659 ALONG Y DIECTION = 1180.30415

NO.OF BAR = 18 NO.OF BAR = 15

PROVIDED NO. BAR = 19 SAFE PROVIDED NO. BAR = 16


SPACING 105 SPACING 150
Provided area of steel = 1491.5 sq.mm Provided area of steel =

CHECK FOR SHEAR STRESS

545
SHEAR FORCE V 189.465
450
DEPTH AT D eff 311.43 545
311.43
trapazoidal width 1595.61 95

area of resisting shear 496917.66 1050


shear devloped = 189.465

percentage of steel 0.14

shear streess 0.38

pemissible shear stress


Y

Size of column

Breadth 0.23
Width 0.3 1.05
0.23

0.3 2.4
2.10 2.03 X
X
2.06 2.06 0.885

Offsety= 1.05 m
2
Y
IS 456
XU 0.53 250 0
XU 0.48 415 0.48 Xu Ru
XU 0.46 500 0 0.48 2.07 Mu=Ru*b*d*d

side depth = 150 mm SAFE

Effective depth = 95

DEPTH OF NEUTRAL AXIS = 124.5714 216.43

SAFE 1047.193

1256 sq.mm 1595.607

SHEAR FORCE V #VALUE!

DEPTH AT D eff #DIV/0!


Tc values for different grade of concrete and and pe
trapazoidal width 0.00 % of steel concrete garde
M15 M20
area of resisting shear #DIV/0! 0.15 0.28 0.28
0.25 0.35 0.36
shear devloped = 0 0.50 0.46 0.48
0.75 0.54 0.56
percentage of steel #VALUE! 1.00 0.60 0.62
1.25 0.64 0.67
shear streess #DIV/0! 1.50 0.68 0.72
1.75 0.71 0.75
pemissible shear stress 2.00 0.71 0.79
2.25 0.71 0.81
2.50 0.71 0.82
2.75 0.71 0.82
3.00 0.71 0.82
t grade of concrete and and percentage of steel
concrete garde
M25 M30 M35 M40and above
0.29 0.29 0.29 0.30
0.36 0.37 0.37 0.38
0.49 0.50 0.50 0.51
0.57 0.59 0.59 0.60
0.64 0.66 0.67 0.68
0.70 0.71 0.73 0.74
0.74 0.76 0.78 0.79
0.78 0.80 0.82 0.84
0.82 0.84 0.86 0.88
0.85 0.88 0.90 0.92
0.88 0.91 0.93 0.95
0.90 0.94 0.96 0.98
0.92 0.96 0.99 1.01

You might also like