0% found this document useful (0 votes)
261 views

SJCAM FunCam Paper Manual - EN - Revised31Oct2019

The FunCam is a simple point-and-shoot camera. It has basic controls like buttons to take photos or videos, switch between modes, navigate menus, and turn the camera on/off. Users can change simple settings like resolution, timer, continuous shooting, loop recording time, date/time, language, and reset defaults. Safety instructions remind adults to supervise children and avoid long charging or sunlight exposure.

Uploaded by

Troy Ferrer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
261 views

SJCAM FunCam Paper Manual - EN - Revised31Oct2019

The FunCam is a simple point-and-shoot camera. It has basic controls like buttons to take photos or videos, switch between modes, navigate menus, and turn the camera on/off. Users can change simple settings like resolution, timer, continuous shooting, loop recording time, date/time, language, and reset defaults. Safety instructions remind adults to supervise children and avoid long charging or sunlight exposure.

Uploaded by

Troy Ferrer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

FUNCAM

Parts of the camera

Shutter Lens

Ports

LCD Display
Lanyard hole

Speaker
Indicator Lights

Main buttons
How to use FunCam

Click to take a
Picture or Video

3 seconds

Turn Camera On
The buttons at the back

Go Back

Previous Next

Ok / Select
Turn On /Off
Photo/Video Change Settings
How to charge FunCam

Slide the cover upward

Plug the charger in


How to insert Memory Card

Slide the cover upward

Insert the MicroSD


Card in the slot
Switch to Video or Photo

While camera is on,


Short-press to switch camera from Photo to Video mode.
Or Video to Photo mode.
Icons on the screen

Take Pictures Battery Status

Shoot Movie
Moving around the selections

Next

Previous
Return to previous screen

The Back button brings you back to the


screen or selection before.
How to change backgrounds

In Photo Mode, choose from 8 background frames


by pressing or .
(Photo Mode only)
How to change colors

Choose from 4 image colors by pressing .


How to turn the camera off

3 seconds

Press POWER BUTTON for 3 seconds to


Turn off camera.
How to change settings

Press the settings button (wheel) to make


changes.
This page is for grownups
1. Children must always be accompanied by a grownup to always keep
them safe while operating the camera.

2. This camera is not suitable for underwater use, do not submerge.

3. Do not leave the camera in hot environments or under direct sunlight


for long periods.

4. Avoid charging for long durations. Keep it away from children and pets
while charging to avoid accidents.

5. Store the camera in a cool, dry, and dust-free place when not in use.
Power Button
• Turn the camera ON by pressing the Power Button for 3 seconds.
• Camera will start in Photo mode.
• Press the Power Button again to switch to Video mode.
• To turn camera OFF, press the Power Button again for 3 seconds.

Previous and Next Buttons


• You can choose from 8 different background images by
using the Previous and Next buttons.

OK Button
• Press OK button to select between 4 different colors.
Each time you press OK button, you will change the color.

Back Button
• Use the Back button to go to the previous screen.
Settings Menu
USE TO NAVIGATE. THEN TO SET.

Video resolution: 1080FHD 1920x1080; 720P 1280X720.


Timed Photo: Single shot, 3S timing, 5S timing, 10S timing.
Continous shooting: On/Off
Loop Video: Off/ 1 minute; 2 minutes; 3 minutes; 5 minutes
Time setting: set up date, time and date format (YY/MM/DD;
MM/DD/YY; DD/MM/YY
Language setting: English, Simplified Chinese, Traditional
Chinese, French, German, Korean, Italian, Portuguese, Russian,
Spanish, and Turkish
Format: Cancel / Confirm
Default Setting: Cancel / Confirm

You might also like