0% found this document useful (0 votes)
155 views7 pages

7KM31200BA011DA0 Datasheet en

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
155 views7 pages

7KM31200BA011DA0 Datasheet en

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Data sheet 7KM3120-0BA01-1DA0

SENTRON PAC3120 LCD 96X96 mm Power Monitoring Device


Controll panel instrument for electrical values protocol: Modbus RTU
with graphics display U rated input: 690/400V 45-65Hz IE rated input:
X/1A oder X/5A AC Power supply: 100 ... 250 V +-10 % AC/DC
screw connections

Model
Product brand name SENTRON
Design of the product basic
Product type designation Measuring instrument
Type of measured value detection complete
Design of the power supply Wide-range power supply

General technical data


Cutout width 92 mm
Cutout height 92 mm
Size of Power Monitoring Device / company-specific size 96
Operating mode for measured value detection
● automatic line frequency detection Yes
● set at 50 Hz No
● set to 60 Hz No
Pulse duration
● initial value 30 ms
● Full-scale value 500 ms

7KM3120-0BA01-1DA0 Subject to change without notice


Page 1/7 01/22/2020 © Copyright Siemens
Voltage curve Sinusoidal or distorted
Measurable line frequency / initial value 45 Hz
Measurable line frequency / Full-scale value 65 Hz
Measuring procedure / for voltage measurement TRMS

Supply voltage
Type of voltage / of the supply voltage AC/DC
Measuring category / for supply voltage CATIII
Apparent power consumption
● without expansion module / typical 8 V·A

Protection class
Protection class IP
● on the front IP65
● Rear side IP20

Current
Measurable current
● 1 / at AC / Rated value 1 A
● 2 / at AC / Rated value 5 A

Suitability
Suitability for operation Installation in stationary control panels in closed rooms
Adjustable time period / minimum 10 ms

Product function
Product function
● Illuminance of display backlighting adjustable No
● Time-controlled reduction of the illuminance of Yes
display backlighting possible
● reactive power measurement Yes
● frequency measurement Yes
● pulse measurement Yes
● Display contrast adjustable Yes
● voltage measurement Yes
● Current measurement Yes
● active power measurement Yes

Display and operation


Design of the display LCD
Number of keys 4
Color / of the background of the display white
Product function / Display can be inverted (positive Yes
<=> negative mode)
Horizontal image resolution 128
Vertical screen resolution 96

7KM3120-0BA01-1DA0 Subject to change without notice


Page 2/7 01/22/2020 © Copyright Siemens
Communication
Number of active connections / at the Ethernet 3
interface
Protocol
● is supported Modbus RTU
Transfer rate
● minimum 4.8 kbit/s
● maximum 115.2 kbit/s

Fault limits
Reference condition / for metering accuracy In accordance with IEC61557-12, IEC62053-22 and IEC62053-23
Formula for relative total measurement inaccuracy
● for measured variable reactive energy Class 2 according to IEC61557-12 and/or IEC62053-23
● for measured variable output +/- 0,5 %
● for measured variable output factor +/- 0,5 %
● for measured variable voltage +/- 0,2 %
● for measured variable current +/- 0,2 %
● for measured variable active energy Cl. 0.5 acc. to... IEC62053-22

Inputs Outputs
Input voltage / at digital input
● at DC / maximum 30 V
Number of digital outputs 2
Number of digital inputs 2
Digital output version switching or pulse output function
Type of switching output bidirectional
Type of electrical connection
● at the digital inputs screw-type terminals
● at the digital outputs screw-type terminals
Input current / at digital input
● initial value for signal<1>-recognition 7 mA
Output current
● at the digital outputs / at DC / limited to 100 ms 130 mA
/ maximum
Operating conditions for digital inputs / external Yes
voltage supply
Operating voltage / as output voltage / at DC / 30 V
maximum permissible
Property of the output / Short-circuit proof Yes
Internal resistance / at the digital outputs 55 Ω
Switching frequency / at digital output / maximum 17 Hz

Measuring inputs
Outer conductors and neutral conductors internal 1.5 MΩ
resistance / for voltage measurement

7KM3120-0BA01-1DA0 Subject to change without notice


Page 3/7 01/22/2020 © Copyright Siemens
Measurable supply voltage
● between (PE)N and L / at AC / minimum 11.5 V
● between (PE)N and L / at AC / maximum 480 V
● between (PE)N and L / at AC / maximum rated 400 V
value
● between the outer conductors / at AC / 690 V
maximum rated value
Voltage measuring range extension / with external Yes
voltage transformers
Current measuring range extension / with external Yes
current transformers
Measuring category / for voltage measurement CATIII
Supply voltage / between the outer conductors / at 831 V
AC / maximum permissible
Continuous current / at AC / maximum permissible 10 A
Measuring category / for current measurement CATIII
Zero-point suppression / for current measurement 0 ... 10 %
Relative measurable current / at AC
● minimum 1 %
● maximum 100 %
Apparent power consumption / for current
measurement
● with measuring range 5 A / per phase 0.3 V·A
Measuring procedure / for current measurement TRMS

Connections
Type of electrical connection
● at the inputs for supply voltage screw-type terminals
● at the measurement inputs for voltage screw-type terminals
● at the measurement inputs for current screw-type terminals

Mechanical Design
Height 96 mm
Height / of the display 54 mm
Width 96 mm
Width
● of the display 72 mm
Depth 56 mm
Installation depth 51 mm
Mounting type / panel mounting Yes
Mounting position vertical
Material thickness / of the control panel
● maximum 4 mm
Net weight 325 g

7KM3120-0BA01-1DA0 Subject to change without notice


Page 4/7 01/22/2020 © Copyright Siemens
Environmental conditions
Installation altitude / at height above sea level / 2 000 m
maximum
Standard
● for pulse emitter according to IEC62053-31
Ambient temperature / during operation
● minimum -25 °C
● maximum 55 °C
Ambient temperature / during storage
● minimum -25 °C
● maximum 70 °C

Certificates
Certificate of suitability
● Approval Australia Yes

Declaration of Conformity other


Manufacturer Declaration

Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.siemens.com/lowvoltage/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=7KM3120-0BA01-1DA0
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/7KM3120-0BA01-1DA0
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=7KM3120-0BA01-1DA0
CAx-Online-Generator
http://www.siemens.com/cax
Tender specifications
http://www.siemens.com/specifications

7KM3120-0BA01-1DA0 Subject to change without notice


Page 5/7 01/22/2020 © Copyright Siemens
96 57,9
96

7KM3120-0BA01-1DA0 Subject to change without notice


Page 6/7 01/22/2020 © Copyright Siemens
7KM3120-0BA01-1DA0 Subject to change without notice
Page 7/7 01/22/2020 © Copyright Siemens

You might also like