Scribd
Upload
160 views

Firmware Upgrade Instructions PDF

The document provides instructions for upgrading firmware versions for various Geovision controller models. It lists the controller models and their current and upgrade-to firmware versions. It then describes three upgrade methods - through the GV-Net Module Utility, GV-IP Device Utility, or the controller's web browser. Step-by-step instructions are provided for each upgrade method.

Uploaded by

Stiven Romez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
160 views

Firmware Upgrade Instructions PDF

The document provides instructions for upgrading firmware versions for various Geovision controller models. It lists the controller models and their current and upgrade-to firmware versions. It then describes three upgrade methods - through the GV-Net Module Utility, GV-IP Device Utility, or the controller's web browser. Step-by-step instructions are provided for each upgrade method.

Uploaded by

Stiven Romez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

How do I Upgrade my Firmware Version?

Applied to
All GV-Controllers

Summary
The upgrade method varies depending on controller models and version numbers. The tables
below specify the method for each controller.

GV-Controller Firmware Version Upgrade To… Upgrade Method


210 / 2110 / 2120 V1.41 V1.41  V2.00
410 / 4110 / 4111 V1.41 V1.41  V2.00
Through GV-Net
810 / 8110 / 8111 V1.41 V1.41  V2.00
Module Utility (V4.3.5.0
AS1010 V1.32 V1.32  V1.XX
or later)
AS1110 V1.21 V1.21  V1.XX
EV48 V1.41 V1.41  V1.XX
Note: For GV-AS 21 / 41 / 81 series controllers, you can also choose to upgrade your firmware
version from the Web browser.

GV-Controller Firmware Version Upgrade To… Upgrade Method


210 / 2110 / 2120 V2.00 V2.00  V2.XX
Through GV-IP Device
410 / 4110 / 4111 V2.00 V2.00  V2.XX
Utility (V8.7.1.0
810 / 8110 / 8111 V2.00 V2.00  V2.XX
or later)
AS1520 V2.00 V2.00  V2.XX
V1.10 V1.41  V2.00 Through GV-IP Device
CS1320 Utility (V8.6.2.0
V2.00 V2.00  V2.XX
or later)

1
How to Upgrade
According to the tables, there are three methods to upgrade your GV-Controller’s firmware
version: from the Web browser, GV-Net Module Utility or GV-IP Device Utility. Use the
appropriate upgrade method for your GV-controller’s current firmware version and follow the
instructions in that section below.

From GV-Net Module Utility


1. Run GV-Net Module Utility.

2. Locate your GV-AS Controller from the list, and click the Log in button to log on to

this module with the login ID and password.

3. Click the Firmware… button, and assign the firmware file for upgrade.

4. After the Firmware Update is complete, your GV-Controller will be automatically logged
onto the module again.

2
From GV-IP Device Utility

IMPORTANT: Never use GV-IP Device Utility for the firmware upgrade if the firmware
version of your GV-Controller is earlier than 2.00.

1. Run GV-IP Device Utility.

2. Locate your GV-Controller from the list.

3. Double click that controller. When the dialog box appears, click the Firmware Upgrade
tab.

4. Click the Browse button to locate the firmware file saved at your local computer.

3
From the Web Browser
1. Go to the Web interface of your GV-Controller.
2. In the left menu, click Firmware Update. This page appears.

3. Click the Browse… button to upload the firmware file.

4. Click the Upload button. When the Update Process reaches 100%, a dialog box appears
and asks you to reboot the system.

5. Click OK. After finishing the Reboot operation, your firmware upgrade is complete.

You might also like