//////////// Standard Header file for the PIC18F4520 device ////////////////

///////////////////////////////////////////////////////////////////////////
//// (C) Copyright 1996, 2013 Custom Computer Services ////
//// This source code may only be used by licensed users of the CCS C ////
//// compiler. This source code may only be distributed to other ////
//// licensed users of the CCS C compiler. No other use, reproduction ////
//// or distribution is permitted without written permission. ////
//// Derivative programs created using this software in object code ////
//// form are not restricted in any way. ////
///////////////////////////////////////////////////////////////////////////
#device PIC18F4520

#nolist
//////// Program memory: 16384x16 Data RAM: 1536 Stack: 31
//////// I/O: 36 Analog Pins: 13
//////// Data EEPROM: 256
//////// C Scratch area: 00 ID Location: 200000
//////// Fuses: LP,XT,HS,RC,EC,EC_IO,H4,RC_IO,INTRC_IO,INTRC,NOFCMEN,FCMEN
//////// Fuses: NOIESO,IESO,PUT,NOPUT,NOBROWNOUT,BROWNOUT_SW,BROWNOUT_NOSL
//////// Fuses: BROWNOUT,BORV45,BORV43,BORV27,BORV21,NOWDT,WDT,WDT1,WDT2
//////// Fuses: WDT4,WDT8,WDT16,WDT32,WDT64,WDT128,WDT256,WDT512,WDT1024
//////// Fuses: WDT2048,WDT4096,WDT8192,WDT16384,WDT32768,CCP2B3,CCP2C1
//////// Fuses: NOPBADEN,PBADEN,NOLPT1OSC,LPT1OSC,NOMCLR,MCLR,NOSTVREN
//////// Fuses: STVREN,NOLVP,LVP,NOXINST,XINST,DEBUG,NODEBUG,PROTECT
//////// Fuses: NOPROTECT,CPB,NOCPB,CPD,NOCPD,WRT,NOWRT,WRTC,NOWRTC,WRTB
//////// Fuses: NOWRTB,WRTD,NOWRTD,EBTR,NOEBTR,EBTRB,NOEBTRB
////////
#if (!defined(__PCH__)||defined(__ISNT_CCS__))
#define _bif
#define int8 char
#define int16 long
#define int32 long long
#define float32 float
#define int1 char

#endif
////////////////////////////////////////////////////////////////// I/O
// Discrete I/O Functions: SET_TRIS_x(), OUTPUT_x(), INPUT_x(),
// PORT_x_PULLUPS(), INPUT(),
// OUTPUT_LOW(), OUTPUT_HIGH(),
// OUTPUT_FLOAT(), OUTPUT_BIT()
// Discrete I/O Prototypes:
_bif void set_tris_a(int8 value);
_bif void set_tris_b(int8 value);
_bif void set_tris_c(int8 value);
_bif void set_tris_d(int8 value);
_bif void set_tris_e(int8 value);
_bif int8 get_tris_a(void);
_bif int8 get_tris_b(void);
_bif int8 get_tris_c(void);
_bif int8 get_tris_d(void);
_bif int8 get_tris_e(void);
_bif void output_a(int8 value);
_bif void output_b(int8 value);
_bif void output_c(int8 value);
_bif void output_d(int8 value);
_bif void output_e(int8 value);
_bif int8 input_a(void);
_bif int8 input_b(void);
_bif int8 input_c(void);
_bif int8 input_d(void);
_bif int8 input_e(void);
_bif int1 input_change_a(void);
_bif int1 input_change_b(void);
_bif int1 input_change_c(void);
_bif int1 input_change_d(void);
_bif int1 input_change_e(void);
_bif int1 input(int16 pin);
_bif int1 input_state(int16 pin);
_bif void output_low(int16 pin);
_bif void output_high(int16 pin);
_bif void output_toggle(int16 pin);
_bif void output_bit(int16 pin, int1 level);
_bif void output_float(int16 pin);
_bif void output_drive(int16 pin);

// Constants used to identify pins in the above are:

#define PIN_A0 31744

#define PIN_A1 31745
#define PIN_A2 31746
#define PIN_A3 31747
#define PIN_A4 31748
#define PIN_A5 31749
#define PIN_A6 31750
#define PIN_A7 31751

#define PIN_B0 31752

#define PIN_B1 31753
#define PIN_B2 31754
#define PIN_B3 31755
#define PIN_B4 31756
#define PIN_B5 31757
#define PIN_B6 31758
#define PIN_B7 31759

#define PIN_C0 31760

#define PIN_C1 31761
#define PIN_C2 31762
#define PIN_C3 31763
#define PIN_C4 31764
#define PIN_C5 31765
#define PIN_C6 31766
#define PIN_C7 31767

#define PIN_D0 31768

#define PIN_D1 31769
#define PIN_D2 31770
#define PIN_D3 31771
#define PIN_D4 31772
#define PIN_D5 31773
#define PIN_D6 31774
#define PIN_D7 31775

#define PIN_E0 31776

#define PIN_E1 31777
#define PIN_E2 31778
#define PIN_E3 31779
////////////////////////////////////////////////////////////////// Useful defines
#define FALSE 0
#define TRUE 1

#define BYTE int8

#define BOOLEAN int1

#define getc getch

#define fgetc getch
#define getchar getch
#define putc putchar
#define fputc putchar
#define fgets gets
#define fputs puts

////////////////////////////////////////////////////////////////// Control
// Control Functions: RESET_CPU(), SLEEP(), RESTART_CAUSE()
// Prototypes:
_bif int8 restart_cause(void);
_bif void reset_cpu(void);
_bif void sleep(void);
_bif void sleep(int8 type);
// Constants returned from RESTART_CAUSE() are:
#define WDT_TIMEOUT 7
#define MCLR_FROM_SLEEP 11
#define MCLR_FROM_RUN 15
#define NORMAL_POWER_UP 12
#define BROWNOUT_RESTART 14
#define WDT_FROM_SLEEP 3
#define RESET_INSTRUCTION 0

// Constants for calls to sleep() are:

#define SLEEP_FULL 0 // Default
#define SLEEP_IDLE 1 // Clock and peripherals don't stop

////////////////////////////////////////////////////////////////// Timer 0
// Timer 0 (AKA RTCC)Functions: SETUP_COUNTERS() or SETUP_TIMER_0(),
// SET_TIMER0() or SET_RTCC(),
// GET_TIMER0() or GET_RTCC()
// Timer 0 Prototypes:
_bif void setup_timer_0(int8 mode);
_bif void set_timer0(int16 value);
_bif int16 get_timer0(void);
_bif void setup_counters(int8 mode, int8 prescaler);
_bif void set_rtcc(int16 value);
_bif int16 get_rtcc(void);
// Constants used for SETUP_TIMER_0() are:
#define T0_INTERNAL 0
#define T0_EXT_L_TO_H 32
#define T0_EXT_H_TO_L 48

#define T0_DIV_1 8
#define T0_DIV_2 0
#define T0_DIV_4 1
#define T0_DIV_8 2
#define T0_DIV_16 3
#define T0_DIV_32 4
#define T0_DIV_64 5
#define T0_DIV_128 6
#define T0_DIV_256 7

#define T0_OFF 0x80

#define T0_8_BIT 0x40

#define RTCC_INTERNAL 0 // The following are provided for compatibility

#define RTCC_EXT_L_TO_H 32 // with older compiler versions
#define RTCC_EXT_H_TO_L 48
#define RTCC_DIV_1 8
#define RTCC_DIV_2 0
#define RTCC_DIV_4 1
#define RTCC_DIV_8 2
#define RTCC_DIV_16 3
#define RTCC_DIV_32 4
#define RTCC_DIV_64 5
#define RTCC_DIV_128 6
#define RTCC_DIV_256 7
#define RTCC_OFF 0x80
#define RTCC_8_BIT 0x40

// Constants used for SETUP_COUNTERS() are the above

// constants for the 1st param and the following for
// the 2nd param:

////////////////////////////////////////////////////////////////// WDT
// Watch Dog Timer Functions: SETUP_WDT() or SETUP_COUNTERS() (see above)
// RESTART_WDT()
// WDT base is 4ms
// WDT Prototypes:
_bif void setup_wdt(int16 mode);
_bif void restart_wdt(void);
// Constants used for SETUP_WDT() are:
#define WDT_ON 0x100
#define WDT_OFF 0

#define WDT_4MS 0x300

#define WDT_8MS 0x500
#define WDT_16MS 0x700
#define WDT_32MS 0x900
#define WDT_64MS 0xB00
#define WDT_128MS 0xD00
#define WDT_256MS 0xF00
#define WDT_512MS 0x1100
#define WDT_1S 0x1300
#define WDT_2S 0x1500
#define WDT_4S 0x1700
#define WDT_8S 0x1900
#define WDT_16 0x1B00
#define WDT_32S 0x1D00
#define WDT_64S 0x1F00
#define WDT_128S 0x2100

////////////////////////////////////////////////////////////////// Timer 1
// Timer 1 Functions: SETUP_TIMER_1, GET_TIMER1, SET_TIMER1
// Timer 1 Prototypes:
_bif void setup_timer_1(int16 mode);
_bif int16 get_timer1(void);
_bif void set_timer1(int16 value);
// Constants used for SETUP_TIMER_1() are:
// (or (via |) together constants from each group)
#define T1_DISABLED 0
#define T1_INTERNAL 0x85
#define T1_EXTERNAL 0x87
#define T1_EXTERNAL_SYNC 0x83

#define T1_CLK_OUT 8

#define T1_DIV_BY_1 0
#define T1_DIV_BY_2 0x10
#define T1_DIV_BY_4 0x20
#define T1_DIV_BY_8 0x30

////////////////////////////////////////////////////////////////// Timer 2
// Timer 2 Functions: SETUP_TIMER_2, GET_TIMER2, SET_TIMER2
// Timer 2 Prototypes:
_bif void setup_timer_2(int8 mode, int8 period, int8 postscale);
_bif int8 get_timer2(void);
_bif void set_timer2(int8 value);
// Constants used for SETUP_TIMER_2() are:
#define T2_DISABLED 0
#define T2_DIV_BY_1 4
#define T2_DIV_BY_4 5
#define T2_DIV_BY_16 6

////////////////////////////////////////////////////////////////// Timer 3
// Timer 3 Functions: SETUP_TIMER_3, GET_TIMER3, SET_TIMER3
// Timer 3 Prototypes:
_bif void setup_timer_3(int16 mode);
_bif int16 get_timer3(void);
_bif void set_timer3(int16 value);
// Constants used for SETUP_TIMER_3() are:
// (or (via |) together constants from each group)
#define T3_DISABLED 0
#define T3_INTERNAL 0x85
#define T3_EXTERNAL 0x87
#define T3_EXTERNAL_SYNC 0x83

#define T3_DIV_BY_1 0
#define T3_DIV_BY_2 0x10
#define T3_DIV_BY_4 0x20
#define T3_DIV_BY_8 0x30

////////////////////////////////////////////////////////////////// CCP
// CCP Functions: SETUP_CCPx, SET_PWMx_DUTY
// CCP Variables: CCP_x, CCP_x_LOW, CCP_x_HIGH
// CCP1 Prototypes:
_bif void setup_ccp1(int32 mode);
_bif void setup_ccp1(int32 mode, int8 pwm);
_bif void set_pwm1_duty(int16 value);
// Constants used for SETUP_CCPx() are:
#define CCP_OFF 0
#define CCP_CAPTURE_FE 4
#define CCP_CAPTURE_RE 5
#define CCP_CAPTURE_DIV_4 6
#define CCP_CAPTURE_DIV_16 7
#define CCP_COMPARE_SET_ON_MATCH 8
#define CCP_COMPARE_CLR_ON_MATCH 9
#define CCP_COMPARE_INT 0xA
#define CCP_COMPARE_INT_AND_TOGGLE 0x2
#define CCP_COMPARE_RESET_TIMER 0xB
#define CCP_PWM 0xC
#define CCP_PWM_PLUS_1 0x1c
#define CCP_PWM_PLUS_2 0x2c
#define CCP_PWM_PLUS_3 0x3c
//#define CCP_USE_TIMER3 0x100 OBSOLETE, SEE TIMER-3
#word CCP_1 = getenv("SFR:CCPR1L")
#byte CCP_1_LOW = getenv("SFR:CCPR1L")
#byte CCP_1_HIGH = getenv("SFR:CCPR1H")
// OR in one of the following to use timer 3 with a CCP unit
#define T3_CCP1_TO_2 0x48
#define T3_CCP2 0x8

// The following should be used with the ECCP unit only (or these in)
#define CCP_PWM_H_H 0x0c
#define CCP_PWM_H_L 0x0d
#define CCP_PWM_L_H 0x0e
#define CCP_PWM_L_L 0x0f

#define CCP_PWM_FULL_BRIDGE 0x40

#define CCP_PWM_FULL_BRIDGE_REV 0xC0
#define CCP_PWM_HALF_BRIDGE 0x80

#define CCP_SHUTDOWN_ON_COMP1 0x100000

#define CCP_SHUTDOWN_ON_COMP2 0x200000
#define CCP_SHUTDOWN_ON_COMP 0x300000
#define CCP_SHUTDOWN_ON_INT0 0x400000
#define CCP_SHUTDOWN_ON_COMP1_INT0 0x500000
#define CCP_SHUTDOWN_ON_COMP2_INT0 0x600000
#define CCP_SHUTDOWN_ON_COMP_INT0 0x700000

#define CCP_SHUTDOWN_AC_L 0x000000

#define CCP_SHUTDOWN_AC_H 0x040000
#define CCP_SHUTDOWN_AC_F 0x080000

#define CCP_SHUTDOWN_BD_L 0x000000

#define CCP_SHUTDOWN_BD_H 0x010000
#define CCP_SHUTDOWN_BD_F 0x020000

#define CCP_SHUTDOWN_RESTART 0x80000000

// CCP2 Prototypes:
_bif void setup_ccp2(int32 mode);
_bif void setup_ccp2(int32 mode, int8 pwm);
_bif void set_pwm2_duty(int16 value);
#word CCP_2 = getenv("SFR:CCPR2L")
#byte CCP_2_LOW = getenv("SFR:CCPR2L")
#byte CCP_2_HIGH = getenv("SFR:CCPR2H")
////////////////////////////////////////////////////////////////// PSP
// PSP Functions: SETUP_PSP, PSP_INPUT_FULL(), PSP_OUTPUT_FULL(),
// PSP_OVERFLOW(), INPUT_D(), OUTPUT_D()
// PSP Variables: PSP_DATA
// PSP Prototypes:
_bif void setup_psp(int8 mode);
_bif int1 psp_output_full(void);
_bif int1 psp_input_full(void);
_bif int1 psp_overflow(void);
// Constants used in SETUP_PSP() are:
#define PSP_ENABLED 0x10
#define PSP_DISABLED 0

#byte PSP_DATA = 0xF83

////////////////////////////////////////////////////////////////// SPI
// SPI Functions: SETUP_SPI, SPI_WRITE, SPI_READ, SPI_DATA_IN
// SPI Prototypes:
_bif void setup_spi(int32 mode);
_bif void spi_write(int8 value);
_bif int8 spi_read(void);
_bif int8 spi_read(int8 value);
_bif int1 spi_data_in(void);
_bif void setup_spi2(int32 mode);
_bif void spi_write2(int8 value);
_bif int8 spi_read2(void);
_bif int8 spi_read2(int8 value);
_bif int1 spi_data_in2(void);
// Constants used in SETUP_SPI() are:
#define SPI_DISABLED 0x00
#define SPI_MASTER 0x20
#define SPI_SLAVE 0x24
#define SPI_SCK_IDLE_HIGH 0x10
#define SPI_SCK_IDLE_LOW 0x00
#define SPI_CLK_DIV_4 0x00
#define SPI_CLK_DIV_16 0x01
#define SPI_CLK_DIV_64 0x02
#define SPI_CLK_T2 0x03
#define SPI_SS_DISABLED 0x01

#define SPI_XMIT_L_TO_H 0x4000

#define SPI_XMIT_H_TO_L 0x0000

#define SPI_SAMPLE_AT_MIDDLE 0x0000

#define SPI_SAMPLE_AT_END 0x8000

//The following are provided for compatibility

#define SPI_L_TO_H SPI_SCK_IDLE_LOW
#define SPI_H_TO_L SPI_SCK_IDLE_HIGH

////////////////////////////////////////////////////////////////// UART
// UART Prototypes:
_bif void setup_uart(int32 baud);
_bif void setup_uart(int32 baud, int8 stream);
_bif void setup_uart(int32 baud, int8 stream, int32 clock);
_bif void set_uart_speed(int32 baud);
_bif void set_uart_speed(int32 baud, int8 stream);
_bif void set_uart_speed(int32 baud, int8 stream, int32 clock);
// Constants used in setup_uart() are:
// FALSE - Turn UART off
// TRUE - Turn UART on
#define UART_ADDRESS 2
#define UART_DATA 4
#define UART_AUTODETECT 8
#define UART_AUTODETECT_NOWAIT 9
#define UART_WAKEUP_ON_RDA 10
#define UART_SEND_BREAK 13
////////////////////////////////////////////////////////////////// COMP
// Comparator Variables: C1OUT, C2OUT
// Comparator Prototypes:
_bif void setup_comparator(int32 mode);
// Constants used in setup_comparator() are:
#define A0_A3_A1_A3 0xfff04
#define A0_A3_A1_A2_OUT_ON_A4_A5 0xfcf03
#define A0_A3_A1_A3_OUT_ON_A4_A5 0xbcf05
#define NC_NC_NC_NC 0x0ff07
#define A0_A3_A1_A2 0xfff02
#define A0_A3_NC_NC_OUT_ON_A4 0x9ef01
#define A0_VR_A1_VR 0x3ff06
#define A3_VR_A2_VR 0xcff0e
#define CP1_INVERT 0x0000010
#define CP2_INVERT 0x0000020

#bit C1OUT = 0xfb4.6

#bit C2OUT = 0xfb4.7

////////////////////////////////////////////////////////////////// VREF
// VREF Prototypes:
_bif void setup_vref(int8 mode);
// Constants used in setup_vref() are:
#define VREF_LOW 0xa0
#define VREF_HIGH 0x80
// Or (with |) the above with a number 0-15
#define VREF_F5 0x40
#define VREF_COMP 0x10

////////////////////////////////////////////////////////////////// VREF
// LVD Prototypes:
_bif void setup_low_volt_detect(int8 mode);
// Constants used in setup_low_volt_detect() are:
#define LVD_LVDIN 0x1F
#define LVD_45 0x1E
#define LVD_42 0x1D
#define LVD_40 0x1C
#define LVD_38 0x1B
#define LVD_36 0x1A
#define LVD_35 0x19
#define LVD_33 0x18
#define LVD_30 0x17
#define LVD_28 0x16
#define LVD_27 0x15
#define LVD_25 0x14
#define LVD_24 0x13
#define LVD_23 0x12
#define LVD_22 0x11
#define LVD_21 0x10

#define LVD_TRIGGER_BELOW 0
#define LVD_TRIGGER_ABOVE 0x80

////////////////////////////////////////////////////////////////// INTERNAL RC
// Oscillator Prototypes:
_bif int8 setup_oscillator(int8 mode);
_bif int8 setup_oscillator(int8 mode, signed int8 tune);
// Constants used in setup_oscillator() are:
// First param:
#define OSC_31KHZ 0
#define OSC_125KHZ 0x10
#define OSC_250KHZ 0x20
#define OSC_500KHZ 0x30
#define OSC_1MHZ 0x40
#define OSC_2MHZ 0x50
#define OSC_4MHZ 0x60
#define OSC_8MHZ 0x70
#define OSC_16MHZ 0x4060
#define OSC_32MHZ 0x4070
// The following may be OR'ed in with the above using |
#define OSC_TIMER1 1
#define OSC_INTRC 2
#define OSC_NORMAL 0
// The following may be OR'ed in with the above using |
#define OSC_IDLE_MODE 0x80
#define OSC_31250 0x8000
#define OSC_PLL_ON 0x4000
#define OSC_PLL_OFF 0
// A second optional parameter may be used with this part to fine
// tune the speed (signed int,-32 to 31)
// Result may be (ignore all other bits)
#define OSC_STATE_STABLE 4
#define OSC_STATE_EXT_RUNNING 8

////////////////////////////////////////////////////////////////// ADC
// ADC Functions: SETUP_ADC(), SETUP_ADC_PORTS() (aka SETUP_PORT_A),
// SET_ADC_CHANNEL(), READ_ADC()
// ADC Prototypes:
_bif void setup_adc(int16 mode);
_bif int8 read_adc(void);
_bif int8 read_adc(int8 mode);
_bif int16 read_adc(void);
_bif int16 read_adc(int8 mode);
_bif int1 adc_done(void);
// Constants used for SETUP_ADC() are:
#define ADC_OFF 0 // ADC Off
#define ADC_CLOCK_DIV_2 0x100
#define ADC_CLOCK_DIV_4 0x04
#define ADC_CLOCK_DIV_8 0x01
#define ADC_CLOCK_DIV_16 0x05
#define ADC_CLOCK_DIV_32 0x02
#define ADC_CLOCK_DIV_64 0x06
#define ADC_CLOCK_INTERNAL 0x07 // Internal 2-6us
// The following may be OR'ed in with the above using |
#define ADC_TAD_MUL_0 0x00
#define ADC_TAD_MUL_2 0x08
#define ADC_TAD_MUL_4 0x10
#define ADC_TAD_MUL_6 0x18
#define ADC_TAD_MUL_8 0x20
#define ADC_TAD_MUL_12 0x28
#define ADC_TAD_MUL_16 0x30
#define ADC_TAD_MUL_20 0x38

//ADC Prototypes:
_bif void setup_adc_ports(int8 pins);
_bif void setup_adc_ports(int8 pins, int8 reference);
_bif void set_adc_channel(int8 channel);
// Constants used in SETUP_ADC_PORTS() are:
// First argument:
#define NO_ANALOGS 0x0F // None
#define ALL_ANALOG 0x00 // A0 A1 A2 A3 A5 E0 E1 E2 B2 B3 B1 B4 B0
#define AN0_TO_AN11 0x03 // A0 A1 A2 A3 A5 E0 E1 E2 B2 B3 B1 B4
#define AN0_TO_AN10 0x04 // A0 A1 A2 A3 A5 E0 E1 E2 B2 B3 B1
#define AN0_TO_AN9 0x05 // A0 A1 A2 A3 A5 E0 E1 E2 B2 B3
#define AN0_TO_AN8 0x06 // A0 A1 A2 A3 A5 E0 E1 E2 B2
#define AN0_TO_AN7 0x07 // A0 A1 A2 A3 A5 E0 E1 E2
#define AN0_TO_AN6 0x08 // A0 A1 A2 A3 A5 E0 E1
#define AN0_TO_AN5 0x09 // A0 A1 A2 A3 A5 E0
#define AN0_TO_AN4 0x0A // A0 A1 A2 A3 A5
#define AN0_TO_AN3 0x0B // A0 A1 A2 A3
#define AN0_TO_AN2 0x0C // A0 A1 A2
#define AN0_TO_AN1 0x0D // A0 A1
#define AN0 0x0E // A0
#define AN0_TO_AN11_ANALOG 0x03 //!old only provided for compatibility
#define AN0_TO_AN10_ANALOG 0x04 //!old only provided for compatibility
#define AN0_TO_AN9_ANALOG 0x05 //!old only provided for compatibility
#define AN0_TO_AN8_ANALOG 0x06 //!old only provided for compatibility
#define AN0_TO_AN7_ANALOG 0x07 //!old only provided for compatibility
#define AN0_TO_AN6_ANALOG 0x08 //!old only provided for compatibility
#define AN0_TO_AN5_ANALOG 0x09 //!old only provided for compatibility
#define AN0_TO_AN4_ANALOG 0x0A //!old only provided for compatibility
#define AN0_TO_AN3_ANALOG 0x0B //!old only provided for compatibility
#define AN0_TO_AN2_ANALOG 0x0C //!old only provided for compatibility
#define AN0_TO_AN1_ANALOG 0x0D //!old only provided for compatibility
#define AN0_ANALOG 0x0E //!old only provided for compatibility

// Optional Second argument:

#define VSS_VDD 0x00 // Range 0-Vdd
#define VREF_VREF 0x30 // Range VrefL-VrefH
#define VREF_VDD 0x20 // Range VrefL-Vdd
#define VSS_VREF 0x10 // Range 0-VrefH

// Constants used in READ_ADC() are:

#define ADC_START_AND_READ 7 // This is the default if nothing is specified
#define ADC_START_ONLY 1
#define ADC_READ_ONLY 6

////////////////////////////////////////////////////////////////// BIF
// Built In Functions Prototypes
//
// Math Prototypes:
_bif signed int8 abs(signed int8 x);
_bif signed int16 abs(signed int16 x);
_bif signed int32 abs(signed int32 x);
_bif float32 abs(float32 x);
_bif unsigned int16 _mul(unsigned int8, unsigned int8);
_bif signed int16 _mul(signed int8, signed int8);
_bif unsigned int32 _mul(unsigned int16, unsigned int16);
_bif signed int32 _mul(signed int16, signed int16);

// Memory Manipulation Prototypes:

_bif int8 read_bank(int8 bank, int8 offset);
_bif void write_bank(int8 bank, int8 offset, int8 value);
_bif void strcpy(char* dest, char* src);
_bif void strcopy(char* dest, char* src);
_bif void memset(unsigned int8* destination, unsigned int8 value, unsigned int16
num);
_bif void memcpy(unsigned int8* destination, unsigned int8* source, unsigned int16
num);

// String Prototypes:
_bif char toupper(char cvalue);
_bif char tolower(char cvalue);
_bif void sprintf(char* string, char* cstring, ...);

// Data Manipulators Prototypes:

_bif int1 shift_left(unsigned int8* address, unsigned int8 bytes, int1 value);
_bif int1 shift_right(unsigned int8* address, unsigned int8 bytes, int1 value);
_bif void rotate_left(unsigned int8* address, unsigned int8 bytes);
_bif void rotate_right(unsigned int8* address, unsigned int8 bytes);
_bif void swap(unsigned int8 value);
_bif unsigned int8 make8(unsigned int16 var, unsigned int8 offset);
_bif unsigned int8 make8(unsigned int32 var, unsigned int8 offset);
_bif unsigned int16 make16(unsigned int8 varhigh, unsigned int8 varlow);
_bif unsigned int32 make32(unsigned int16 var1);
_bif unsigned int32 make32(unsigned int16 var1, unsigned int16 var2);
_bif unsigned int32 make32(unsigned int16 var1, unsigned int8 var2);
_bif unsigned int32 make32(unsigned int16 var1, unsigned int8 var2, unsigned int8
var3);
_bif unsigned int32 make32(unsigned int8 var1);
_bif unsigned int32 make32(unsigned int8 var1, unsigned int8 var2);
_bif unsigned int32 make32(unsigned int8 var1, unsigned int8 var2, unsigned int8
var3);
_bif unsigned int32 make32(unsigned int8 var1, unsigned int8 var2, unsigned int8
var3, unsigned int8 var4);
_bif unsigned int32 make32(unsigned int8 var1, unsigned int16 var2);
_bif unsigned int32 make32(unsigned int8 var1, unsigned int16 var2, unsigned int8
var3);
_bif unsigned int32 make32(unsigned int8 var1, unsigned int8 var2, unsigned int16
var3);
_bif void bit_set(unsigned int8 var, unsigned int8 bit);
_bif void bit_set(unsigned int16 var, unsigned int8 bit);
_bif void bit_set(unsigned int32 var, unsigned int8 bit);
_bif void bit_clear(unsigned int8 var, unsigned int8 bit);
_bif void bit_clear(unsigned int16 var, unsigned int8 bit);
_bif void bit_clear(unsigned int32 var, unsigned int8 bit);
_bif int1 bit_test(unsigned int8 var, unsigned int8 bit);
_bif int1 bit_test(unsigned int16 var, unsigned int8 bit);
_bif int1 bit_test(unsigned int32 var, unsigned int8 bit);

// #use delay() Prototypes:

_bif void delay_cycles(unsigned int8 count);
_bif void delay_ms(unsigned int16 time);
_bif void delay_us(unsigned int16 time);

// #use rs232() Prototypes:

_bif void putchar(char cdata);
_bif void putchar(char cdata, unsigned int8 stream);
_bif void puts(char* string);
_bif void puts(char* string, unsigned int8 stream);
_bif char getch(void);
_bif char getch(unsigned int8 stream);
_bif void gets(char* string);
_bif void gets(char* string, unsigned int8 stream);
_bif int1 kbhit(void);
_bif int1 kbhit(unsigned int8 stream);
_bif void printf(char* string, ...);
_bif void fprintf(unsigned int8 stream, char* string, ...);
_bif void putc_send(void);
_bif void fputc_send(unsigned int8 stream);
_bif int1 rcv_buffer_full(void);
_bif int1 rcv_buffer_full(unsigned int8 stream);
_bif unsigned int16 rcv_buffer_bytes(void);
_bif unsigned int16 rcv_buffer_bytes(unsigned int8 stream);
_bif int1 tx_buffer_full(void);
_bif int1 tx_buffer_full(unsigned int8 stream);
_bif unsigned int16 tx_buffer_bytes(void);
_bif unsigned int16 tx_buffer_bytes(unsigned int8 stream);

// #use i2c() Prototypes:

_bif unsigned int8 i2c_read(void);
_bif unsigned int8 i2c_read(unsigned int8 stream);
_bif unsigned int8 i2c_read(unsigned int8 stream, int1 ack);
_bif int1 i2c_write(unsigned int8 data);
_bif int1 i2c_write(unsigned int8 stream, unsigned int8 data);
_bif void i2c_start(void);
_bif void i2c_start(unsigned int8 stream);
_bif void i2c_start(unsigned int8 stream, unsigned int8 restart);
_bif void i2c_stop(void);
_bif void i2c_stop(unsigned int8 stream);
_bif int8 i2c_isr_state(void);
_bif void i2c_slaveaddr(unsigned int8 addr);
_bif void i2c_slaveaddr(unsigned int8 stream, unsigned int8 addr);
_bif int1 i2c_poll(void);
_bif int1 i2c_poll(unsigned int8 stream);
_bif void i2c_init(unsigned int32 baud);
_bif void i2c_init(unsigned int8 stream, unsigned int32 baud);

// #use spi() Prototypes:

_bif unsigned int8 spi_xfer(void);
_bif unsigned int16 spi_xfer(void);
_bif unsigned int32 spi_xfer(void);
_bif unsigned int8 spi_xfer(unsigned int8 data);
_bif unsigned int16 spi_xfer(unsigned int16 data);
_bif unsigned int32 spi_xfer(unsigned int32 data);
_bif unsigned int8 spi_xfer(unsigned int8 stream, unsigned int8 data);
_bif unsigned int16 spi_xfer(unsigned int8 stream, unsigned int16 data);
_bif unsigned int32 spi_xfer(unsigned int8 stream, unsigned int32 data);
_bif unsigned int8 spi_xfer(unsigned int8 stream, unsigned int8 data, unsigned int8
bits);
_bif unsigned int16 spi_xfer(unsigned int8 stream, unsigned int16 data, unsigned
int8 bits);
_bif unsigned int32 spi_xfer(unsigned int8 stream, unsigned int32 data, unsigned
int8 bits);
_bif void spi_init(unsigned int32 baud);
_bif void spi_init(unsigned int8 stream, unsigned int32 baud);
_bif void spi_speed(unsigned int32 baud);
_bif void spi_speed(unsigned int8 stream, unsigned int32 baud);
_bif void spi_speed(unsigned int8 stream, unsigned int32 baud, unsigned int32
clock);
_bif void spi_prewrite(unsigned int8 data);
_bif void spi_prewrite(unsigned int16 data);
_bif void spi_prewrite(unsigned int32 data);
_bif void spi_prewrite(unsigned int8, unsigned int8 data);
_bif void spi_prewrite(unsigned int8, unsigned int16 data);
_bif void spi_prewrite(unsigned int8, unsigned int32 data);
_bif unsigned int8 spi_xfer_in(void);
_bif unsigned int16 spi_xfer_in(void);
_bif unsigned int32 spi_xfer_in(void);
_bif unsigned int8 spi_xfer_in(unsigned int8 bits);
_bif unsigned int16 spi_xfer_in(unsigned int8 bits);
_bif unsigned int32 spi_xfer_in(unsigned int8 bits);
_bif unsigned int8 spi_xfer_in(unsigned int8 stream, unsigned int8 bits);
_bif unsigned int16 spi_xfer_in(unsigned int8 stream, unsigned int8 bits);
_bif unsigned int32 spi_xfer_in(unsigned int8 stream, unsigned int8 bits);

// #use rtos() Prototypes:

_bif void rtos_run(void);
_bif void rtos_yield(void);
_bif void rtos_enable(unsigned int8 task);
_bif void rtos_disable(unsigned int8 task);
_bif void rtos_terminate(void);
_bif void rtos_await(int1 flag);
_bif void rtos_wait(unsigned int8 sem);
_bif void rtos_signal(unsigned int8 sem);
_bif void rtos_msg_send(unsigned int8 task, unsigned int8 msg);
_bif unsigned int8 rtos_msg_read(void);
_bif unsigned int8 rtos_msg_poll(void);
_bif int1 rtos_overrun(unsigned int8 task);
_bif void rtos_stats(unsigned int8 task, unsigned int8* stat);

// #use timer() Prototypes:

_bif unsigned int8 get_ticks(void);
_bif unsigned int16 get_ticks(void);
_bif unsigned int32 get_ticks(void);
_bif unsigned int8 get_ticks(unsigned int8 stream);
_bif unsigned int16 get_ticks(unsigned int8 stream);
_bif unsigned int32 get_ticks(unsigned int8 stream);
_bif void set_ticks(unsigned int8 value);
_bif void set_ticks(unsigned int16 value);
_bif void set_ticks(unsigned int32 value);
_bif void set_ticks(unsigned int8 stream, unsigned int8 value);
_bif void set_ticks(unsigned int8 stream, unsigned int16 value);
_bif void set_ticks(unsigned int8 stream, unsigned int32 value);

// #use pwm() Prototypes:

_bif void pwm_on(void);
_bif void pwm_on(unsigned int8 stream);
_bif void pwm_off(void);
_bif void pwm_off(unsigned int8 stream);
_bif void pwm_set_duty(unsigned int16 duty);
_bif void pwm_set_duty(unsigned int8 stream, unsigned int16 duty);
_bif void pwm_set_duty_percent(unsigned int16 percent);
_bif void pwm_set_duty_percent(unsigned int8 stream, unsigned int16 percent);
_bif void pwm_set_frequency(unsigned int32 frequency);
_bif void pwm_set_frequency(unsigned int8 stream, unsigned int32 frequency);

// #use capture() Prototypes:

_bif unsigned int16 get_capture_time(void);
_bif unsigned int16 get_capture_time(unsigned int8 stream);
_bif int1 get_capture_event(void);
_bif int1 get_capture_event(unsigned int8 stream);

// Enviroment Prototypes:
//_bif unsigned int8 getenv(char* cstring);

// Address Prototypes:
#ifndef __ADDRESS__
#if defined(__PCM__) || define(__PCB__)
typedef unsigned int16 __ADDRESS__;
#else
typedef unsigned int32 __ADDRESS__;
#endif
#endif
_bif void goto_address(__ADDRESS__ address);
_bif __ADDRESS__ label_address(__ADDRESS__ label);

// Program Memory Prototypes:

_bif void read_program_memory(__ADDRESS__ address, unsigned int8* dataptr, unsigned
int16 count);
_bif unsigned int16 read_program_eeprom(__ADDRESS__ address);
_bif void erase_program_eeprom(__ADDRESS__ address);
_bif void write_program_memory(__ADDRESS__ address, unsigned int8* dataptr,
unsigned int16 count);
_bif void write_program_eeprom(__ADDRESS__ address, unsigned int16 data);

// EEPROM Prototypes:
#ifndef __EEADDRESS__
#if getenv("DATA_EEPROM")>=0x100
typedef unsigned int16 __EEADDRESS__;
#else
typedef unsigned int8 __EEADDRESS__;
#endif
#endif
_bif unsigned int8 read_eeprom(__EEADDRESS__ address);
_bif void write_eeprom(__EEADDRESS__ address, unsigned int8 value);

////////////////////////////////////////////////////////////////// INT
// Interrupt Functions: ENABLE_INTERRUPTS(), DISABLE_INTERRUPTS(),
// CLEAR_INTERRUPT(), INTERRUPT_ACTIVE(),
// EXT_INT_EDGE()
// INT Prototypes:
_bif void enable_interrupts(int32 interrupt);
_bif void disable_interrupts(int32 interrupt);
_bif void clear_interrupt(int32 interrupt);
_bif int1 interrupt_active(int32 interrupt);
_bif int1 interrupt_enabled(int32 interrupt);
_bif void ext_int_edge(int8 source, int8 edge);
_bif void jump_to_irs(int16 address);
// Constants used in EXT_INT_EDGE() are:
#define L_TO_H 0x40
#define H_TO_L 0
// Constants used in ENABLE/DISABLE_INTERRUPTS() are:
#define GLOBAL 0xF2C0
#define PERIPH 0xF240
#define INT_RTCC 0x00F220
#define INT_TIMER0 0x00F220
#define INT_TIMER1 0x009D01
#define INT_TIMER2 0x009D02
#define INT_TIMER3 0x00A002
#define INT_EXT_L2H 0x5000F210
#define INT_EXT_H2L 0x6000F210
#define INT_EXT 0x00F210
#define INT_EXT1_L2H 0x5001F008
#define INT_EXT1_H2L 0x6001F008
#define INT_EXT1 0x00F008
#define INT_EXT2_L2H 0x5002F010
#define INT_EXT2_H2L 0x6002F010
#define INT_EXT2 0x00F010
#define INT_RB 0x00FFF208
#define INT_PSP 0x009D80
#define INT_AD 0x009D40
#define INT_RDA 0x009D20
#define INT_TBE 0x009D10
#define INT_SSP 0x009D08
#define INT_CCP1 0x009D04
#define INT_CCP2 0x00A001
#define INT_BUSCOL 0x00A008
#define INT_LOWVOLT 0x00A004
#define INT_COMP 0x00A040
#define INT_EEPROM 0x00A010
#define INT_OSCF 0x00A080
#define INT_HLVD 0x00A004

#list