0% found this document useful (0 votes)
678 views

Diploma CSVTU Project Format

This document appears to be a student project submission template containing the standard sections and formatting for a student at RKR Government Polytechnic in Janjgir Champa, Chhattisgarh, India. It includes sections for the project title, declaration, certification, acknowledgments, abstract, table of contents, lists of figures/tables/abbreviations, and chapters. The student would fill in their name, project title, enrollment number, and other details as required in the designated sections to submit their final project report according to the provided template.

Uploaded by

upendra patel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
678 views

Diploma CSVTU Project Format

This document appears to be a student project submission template containing the standard sections and formatting for a student at RKR Government Polytechnic in Janjgir Champa, Chhattisgarh, India. It includes sections for the project title, declaration, certification, acknowledgments, abstract, table of contents, lists of figures/tables/abbreviations, and chapters. The student would fill in their name, project title, enrollment number, and other details as required in the designated sections to submit their final project report according to the provided template.

Uploaded by

upendra patel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

WRITE YOUR FULL PROJECT TITLE IN BOLD AND

UPPER CASE
A MINOR PROJECT Submitted
to

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY


BHILAI (C.G.), INDIA

In Partial fillment
for the Award ofree
of
DIPLOMA IN ENGINEERING
In

Electronics and Telecommunication Engineering


(Specialized in Communication)
by

YOUR NAME IN BOLD


Enrollment No.: AXXXXX
Roll No.: 514XXXXXX

Under the Guidance of


Mr.
LECTURER (ET&T)
RKR GOVT. POLYTECHNIC, JANJGIR CHAMPA

RKR GOVERNMENT POLYTECHNIC,


JANJGIR CHAMPA
Session 20XX- 20XX
dedicated to my parents
DECLARATION BY THE CANDIDATE

I the undersigned solemnly declare that the report of the thesis work entitled Project
Title in Bold Italic is based my own work carried out during the course of my study under
the supervision of Mr. project Supervisor.
I assert that the statements made and conclusions drawn are an outcome of the project
work. I further declare that to the best of my knowledge and belief that the report does not
contain any part of any work which has been submitted for the award of any other degree or
certificate in this University of India or any other country. All helps received and citations
used for the preparation of thesis have been duly acknowledged.

________________

(Your Name in Bold)


Roll No.: 5145113025
Enrollment No.: AM4775
Dept of Electronics & Telecommunication
RKR GOVERNMENT POLYTECHNIC
JANJGIR CHAMPA,CHHATTISGARH

_________________

(Project Supervisor)
Mr.
LECTURER (ET&T)
Dept of Electronics & Telecommunication
RKR GOVERNMENT POLYTECHNIC
JANJGIR CHAMPA,CHHATTISGARH

i
CERTIFICATE BY THE SUPERVISOR

This is to certify that the report of the thesis entitled “Project Title in Bold” is a record
of bona fide research work carried out by Your name, bearing Roll No.: 5145XXXXX,
& Enrollment No.: APXXXX under my guidance and supervision for the award of
Master of Engineering, in Electronics & Telecommunication Engineering
(Specialization in Communication) of Chhattisgarh Swami Vivekanand Technical
University, Bhilai (C.G.) India.

Tothe best of my Knowledge the thesis


 Embodies the work of the candidate him/herself,
 Has duly been completed,
 Fulfill the requirements of the ordinance relating to the M.E. degree of the University
and
 Is up to the desired standard both in respect of contents and language for being
referred to the examiners

________________

Dept of Electronics & Telecommunication


RKR GOVERNMENT POLYTECHNIC
JANJGIR CHAMPA,CHHATTISGARH

ii
DISSERTATION APPROVAL SHEET

Report entitled Project title in bold and Italic by Your name bearing Roll No:
514XXXX and Enrollment No: APXXXX for the fulfillment of Master in Engineering in
Electronics & Telecommunication (Specialization in Communication) is approved &
forwarded to Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.), India.

Forwarded to Chhattisgarh Swami Vivekanand Technical University, Bhilai C. G.

(Project Supervisor) (Head of Department)


Mr. Mr.
Dept of Elecronics &Telecomm. Dept of Elecronics &Telecommunication
RKR GOVT. POLYTECHNIC, RKR GOVT. POLYTECHNIC,
JANJGIR CHAMPA JANJGIR CHAMPA

(PRICIPAL)
Mr.
RKR GOVERNMENT POLYTECHNIC
JANJGIR CHAMPA,CHHATTISGARH

iii
.

CERTIFICATE BY THE EXAMINER

This is to certify that the project work entitled Project title in bold and Italic
submitted by Your name, Roll No: 514XXXX and Enrollment No: AMXXX has
been examined by the undersigned as a part of the examination for the award of
Master of Engineering, in Electronics & Telecommunication Engineering
(Specialization in Communication) of Chhattisgarh Swami Vivekananda Technical
University, Bhilai (C. G.).

__________________ ___________________

Internal Examiner External Examiner


Date: Date:

iv
ACKNOWLEDGEMENT

Acknowledgement page must be written by every individual in his/her own words.


he/she can acknowledge the persons who were involved directly or indirectly involved
in the completion of his/her project. here is an example. I would like to acknowledge
my gratitude to a number of people who have helped me in different ways for the
successful completion of my thesis. I take this opportunity to express a deep sense of
gratitude towards my guide, Mr. Sagar Singh Rathore Assistant Professor (E&I),
Faculty of Engineering & Technology, SSTC-SSGI, Bhilai for providing excellent
guidance, encouragement and inspiration throughout the project work. Without his
invaluable guidance, this work would never have been a successful one.
I am thankful to Mr. ChinmayChandrakar HOD, ET&T Department, and Dr.P.
B. Deshmukh, Director, SSTC-SSGI, Faculty of Engineering & Technology, Bhilai
for their kind help and cooperation.

I would also like to thank Mr. ChandrashekharKamargaonkarM.E. In-charge,


SSTC-SSGI, Mr. Sharad Mohan Shrivastava, Faculty of Engineering &
Technology, Bhilai for his kind support and helpful suggestions.

I feel immensely moved in expressing my indebtedness to my parents whose


sacrifice, guidance and blessings helped me to complete my work.

Lastly, My most sincere thanks to everyone, even the ones I've forgotten when
writing this.

Your name
Roll No. 5145113025
Enrollment No.: AM4775

v
vi
Abstract

i
Contents

ii
List of Figures

iii
List of Tables

iv
List of Abbreviations

v
vi
Chapter 1

Introduction

1
Chapter 2

Chapter Title

2
Chapter 3

Chapter Title

3
Bibliography

You might also like