0% found this document useful (0 votes)
111 views

Mudmaker Apr97

The document contains details of a drilling mud formulation including: - Date, well designation, operator and rig details for a well injection well. - Required mud properties including density, base oil used, weighting agents and their amounts. - Formulation and costing per cubic meter and per barrel of the mud, including products used and their costs. - Analysis of component costs and margins per barrel of mud. - Concentrations of additives used in the synthetic mud per meter and per barrel.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
111 views

Mudmaker Apr97

The document contains details of a drilling mud formulation including: - Date, well designation, operator and rig details for a well injection well. - Required mud properties including density, base oil used, weighting agents and their amounts. - Formulation and costing per cubic meter and per barrel of the mud, including products used and their costs. - Analysis of component costs and margins per barrel of mud. - Concentrations of additives used in the synthetic mud per meter and per barrel.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 104

03/24/2020 22:39:18 466431629.

xls

DATA ENTRY SCREEN

Date 2-Oct-96 Interval 8 1/2


Well designation 211/12a SW1 Mud Type ULTIDRILL
Operator B.P.Exploratio Feet/meters Meters
Rig/Platform Ocean GuardiaWell Type Injector

Mud Properties Synthetic - Data Entry

Required Mud Density 624 pptf


Base Oil Density 0.778
Weighting agent - DOLOMITE 2.900
Percent w/w Salt in Brine 25.19
Purity of Salt % 83.5
Brine Density 1.241
Volume of Mud Required 1
Base Fluid Ultidrill
Salt Type CaCl2
Salt (mg/l) 312,528
W.P.S. (mg/l) 200,018
Oil Ratio (% OIL) 70 (2.33)
S.G Check 1.441 1.441

Formulation & Costing per cubic Meter

Product Formulation Unit Unit Price

WATER 201.47 L L £ 0.00


BASE OIL 454.83 L L £ 0.712
SALT 87.04 Kg 25 Kg £ 8.84
DOLOMITE 713.92 Kg 1000 Kg £ 51.50
ULTIDRILL EMUL HT 31.06 L 200 L £448.28
ULTIDRILL FL 0.00 L 200 L £610.00
ULTIDRILL OW 0.00 L 200 L £419.76
ULTIDRILL S 11.43 Kg 25 Kg £11.50
ULTIDRILL LO-RM 1.40 L 200 L £475.20
03/24/2020 22:39:18 466431629.xls

ULTIDRILL VISTONE 14.29 Kg 25 Kg £30.45


LIME 22.86 Kg 25 Kg £2.60
ULTIDRILL TRUVIS 0.00 Kg 25 Kg £74.45
ULTIDRILL TRUVIS HT 0.00 Kg 25 Kg £82.00
ULTIDRILL DEFLOC 0.00 L 200 L £547.30
IDCARB 150 0.00 Kg 25 Kg £4.55
IDCARB 75 0.00 Kg 25 Kg £4.55
TRUFLO 100 5.71 Kg 25 Kg £137.50
SOLTEX 0.00 Kg 25 Kg £45.00
GILSONITE 0.00 Kg 25 Kg £11.40

Formulation & Costing per bbl

Product Formulation Unit Unit Price

WATER 32.03 L 1L £ 0.00


BASE OIL 72.32 L 1L £ 0.712
SALT 13.84 Kg 25 Kg £ 8.84
DOLOMITE 113.52 Kg 1000 Kg £ 51.50
ULTIDRILL EMUL HT 4.94 L 200 L £448.28
ULTIDRILL FL 0.00 L 200 L £610.00
ULTIDRILL OW 0.00 L 200 L £419.76
ULTIDRILL S 1.82 Kg 25 Kg £11.50
ULTIDRILL LO-RM 0.22 L 200 L £475.20
ULTIDRILL VISTONE 2.27 Kg 25 Kg £30.45
LIME 3.63 Kg 25 Kg £2.60
ULTIDRILL TRUVIS 0.00 Kg 25 Kg £74.45
ULTIDRILL TRUVIS HT 0.00 Kg 25 Kg £82.00
ULTIDRILL DEFLOC 0.00 L 200 L £547.30
IDCARB 150 0.00 Kg 25 Kg £4.55
IDCARB 75 0.00 Kg 25 Kg £4.55
TRUFLO 100 0.91 Kg 25 Kg £137.50
SOLTEX 0.00 Kg 25 Kg £45.00
GILSONITE 0.00 Kg 25 Kg £11.40
0 0.00 L 0L £0.00
0 0.00 L 0L £0.00
0
03/24/2020 22:39:18 466431629.xls

COST OF SALES - MARGIN ANALYSIS PER BARRE

Product Unit Cost Selling Gross


Price Margin
WATER £ 0.00
BASE OIL £ 0.50 £ 0.71 29.75%
SALT £ 0.50 £ 8.84 94.34%
DOLOMITE £ 40.00 £ 51.50 22.33%
ULTIDRILL EMUL HT £ 200.00 £ 448.28 55.39%
ULTIDRILL FL £ 500.00 £ 610.00 18.03%
ULTIDRILL OW £ 200.00 £ 419.76 52.35%
ULTIDRILL S £ 10.00 £ 11.50 13.04%
ULTIDRILL LO-RM £ 400.00 £ 475.20 15.82%
ULTIDRILL VISTONE £ 3.50 £ 30.45 88.51%
LIME £ 2.00 £ 2.60 23.08%
ULTIDRILL TRUVIS £ 70.00 £ 74.45 5.98%
ULTIDRILL TRUVIS HT £ 3.00 £ 82.00 96.34%
ULTIDRILL DEFLOC £ 100.00 £ 547.30 81.73%
IDCARB 150 £ 2.25 £ 4.55 50.55%
IDCARB 75 £ 2.25 £ 4.55 50.55%
TRUFLO 100 £ 100.00 £ 137.50 27.27%
SOLTEX £ 20.00 £ 45.00 55.56%
GILSONITE £ 17.00 £ 11.40 -49.12%

Totals
0 Margin %
03/24/2020 22:39:18 466431629.xls

SCREEN

Additive Concentrations -synthetic


Product PPB per M3
ULTIDRILL EMUL HT 10.0 PPB 31.06 L
ULTIDRILL FL 0.00 L
ULTIDRILL OW 0.00 L
ULTIDRILL S 4.0 PPB 11.43 Kg
ULTIDRILL LO-RM 0.5 PPB 1.40 L
ULTIDRILL VISTONE 5.0 PPB 14.29 Kg
LIME 8.0 PPB 22.86 Kg
ULTIDRILL TRUVIS 0.00 Kg
ULTIDRILL TRUVIS HT 0.00 Kg
ULTIDRILL DEFLOC 0.00 L
IDCARB 150 0.00 Kg
IDCARB 75 0.00 Kg
TRUFLO 100 2.0 PPB 5.71 Kg
SOLTEX 0.00 Kg
GILSONITE 0.00 Kg
0

Component Cost

£ 0.00
£ 323.71
£ 30.78
£ 36.77
£ 69.61
£ 0.00
£ 0.00
£ 5.26
£ 3.33
03/24/2020 22:39:18 466431629.xls

£ 17.40
£ 2.38
£ 0.00
£ 0.00
£ 0.00
£ 0.00
£ 0.00
£ 31.43
£ 0.00
£ 0.00

£ 520.66

Component Cost Formulation ONE FOUR


bbl Lab Barrel Lab Barrels
£ 0.00 0.201 bbl 70.52 mls 282.1 gms
£ 51.47 0.455 bbl 159.21 mls 495.45 gms
£ 4.89 30.51 lb 30.51 gms 122.0 gms
£ 5.85 250.26 lb 250.26 gms 1001.0 gms
£ 11.07 10.0 PPB 10.00 gms 40.0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 0.84 4.0 PPB 4.00 gms 16.0 gms
£ 0.53 0.5 PPB 0.50 gms 2.0 gms
£ 2.77 5.0 PPB 5.00 gms 20.0 gms
£ 0.38 8.0 PPB 8.00 gms 32.0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 5.00 2.0 PPB 2.00 gms 8.0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
£ 0.00 0.0 PPB 0.00 gms .0 gms
0.0 PPB 0.00 gms .0 gms
0.0 PPB 0.00 gms .0 gms
£ 82.79
03/24/2020 22:39:18 466431629.xls

ALYSIS PER BARREL


NALYSIS

Component Component
Price Margin
£ 0.00
£ 51.47 £ 15.31
£ 4.89 £ 4.62
£ 5.85 £ 1.31
£ 11.07 £ 6.13
£ 0.00 £ 0.00
£ 0.00 £ 0.00
£ 0.84 £ 0.11
£ 0.53 £ 0.08
£ 2.77 £ 2.45
£ 0.38 £ 0.09
£ 0.00 £ 0.00
£ 0.00 £ 0.00
£ 0.00 £ 0.00
£ 0.00 £ 0.00
£ 0.00 £ 0.00
£ 5.00 £ 1.36
£ 0.00 £ 0.00
£ 0.00 £ 0.00

£ 82.79 £ 31.46
38.00%
03/24/2020 22:39:18 466431629.xls

Oil Sol Weight Additiv Volume Addi


1 28.57 Kg 31.06 L
1 0.00 Kg 0.00 L
1 0.00 Kg 0.00 L
1 11.43 Kg 10.78 L
1 1.43 Kg 1.40 L
0 14.29 Kg 7.94 L
0 22.86 Kg 9.73 L
0 0.00 Kg 0.00 L
0 0.00 Kg 0.00 L
1 0.00 Kg 0.00 L
0 0.00 Kg 0.00 L
0 0.00 Kg 0.00 L
1 5.71 Kg 5.55 L
0.00 Kg 0.00 L
0.00 Kg 0.00 L

84.29 Kg 66.45 L
03/24/2020 22:39:18 466431629.xls

Date 2-Oct-96
Schlumberger Dowell File /Tender 211/12a SW1
Operator B.P.Explorati
Produced for Ocean Guardi
Input Data Additive Conc.per CU.M of Mu
Additive Conc.
Required Mud Density 624 ULTIDRILL EMUL H 31.06 L
pptf ULTIDRILL FL 0.00 L
ULTIDRILL OW 0.00 L
Oil Ratio 70 ULTIDRILL S 11.43 Kg
Base OIl Density 0.778 ULTIDRILL LO-RM 1.40 L
Density Barite 2.9 ULTIDRILL VISTON 14.29 Kg
Percent w/w Salt in Brin 25.19 LIME 22.86 Kg
Purity of Salt % 83.5 ULTIDRILL TRUVIS 0.00 Kg
Brine Density 1.241 ULTIDRILL TRUVIS 0.00 Kg
Oil Type Ultidrill ULTIDRILL DEFLO 0.00 Kg
Salt Type CaCl2 IDCARB 150 0.00 Kg
Salt Content (mg/l) 312,528 IDCARB 75 0.00 Kg
Chloride Content (mg/l) 200,018 TRUFLO 100 5.71 Kg
Volume Mud 1 bbl SOLTEX 0.00 Kg
Price Per bbl £82.79 GILSONITE 0.00 Kg
Calculation Area
Weight of Minor Additives 84.29 Kg Weight of Barite 713.92 Kg
Volume of Minor Additives 66.45 L Volume of Water 201.47 L
Volume of Oil Soluble Addit 48.79 L Weight of Salt 87.04 Kg
Volume of Brine 232.54 L Total Weight 1440.58 Kg
Volume of Base Oil 454.83 L Total Volume 1000.00 Kg
SG Check 1.44
Formulations 1M 3
350 mls Barrel
WATER 201.47 L 70.52 0.201 bbl
BASE OIL 454.83 L 159.19 0.455 bbl
SALT 87.04 Kg 30.46 30.51 lb
DOLOMITE 713.92 Kg 249.87 250.26 lb
ULTIDRILL EMUL HT 31.06 L 10.00 4.94 L
ULTIDRILL FL 0.00 L 0.00 0.00 L
ULTIDRILL OW 0.00 L 0.00 0.00 L
ULTIDRILL S 11.43 Kg 4.00 1.82 L
ULTIDRILL LO-RM 1.40 L 0.50 0.22 L
ULTIDRILL VISTONE 14.29 Kg 5.00 2.27 Kg
03/24/2020 22:39:18 466431629.xls

LIME 22.86 Kg 8.00 3.63 Kg


ULTIDRILL TRUVIS 0.00 Kg 0.00 0.00 Kg
ULTIDRILL TRUVIS HT 0.00 Kg 0.00 0.00 Kg
ULTIDRILL DEFLOC 0.00 L 0.00 0.00 L
IDCARB 150 0.00 Kg 0.00 0.00 Kg
IDCARB 75 0.00 Kg 0.00 0.00 Kg
TRUFLO 100 5.71 Kg 2.00 0.91 Kg
SOLTEX 0.00 Kg 0.00 0.00 Kg
GILSONITE 0.00 Kg 0.00 0.00 Kg
03/24/2020 22:39:18 466431629.xls

Oil sol vol S.G.


31.06 L 0.920
0.00 L 0.920
0.00 L 0.880
10.78 L 1.060
1.40 L 1.020
0.00 L 1.800
0.00 L 2.350
0.00 L 1.700
0.00 L 1.700
0.00 L 1.050
0.00 L 2.710
0.00 L 2.710
5.55 L 1.030
0.00 L 0.980
0.00 L 1.500

48.79 L
03/24/2020 22:39:18 466431629.xls

Interval 8.5
Well ULTIDRILL
Depth: Meters
Well Type Injector
nc.per CU.M of MuQuantities for
ppb 1 BBL
10.0 PPB 1
0.0 PPB 0
0.0 PPB 0
4.0 PPB 1
0.5 PPB 1
5.0 PPB 1
8.0 PPB 1
0.0 PPB 0
0.0 PPB 0
0.0 PPB 0
0.0 PPB 0
0.0 PPB 0
2.0 PPB 1
0.0 PPB 0
0.0 PPB 0

pptf ppg
Price List Comp.Price
- -
£ 113.150 £ 51.47
£ 8.84 £ 4.89
£ 51.50 £ 5.85
£ 448.28 £ 11.07
£ 610.00 £ 0.00
£ 419.76 £ 0.00
£ 11.50 £ 0.84
£ 475.20 £ 0.53
£ 30.45 £ 2.77
03/24/2020 22:39:18 466431629.xls

£ 2.60 £ 0.38
£ 74.45 £ 0.00
£ 82.00 £ 0.00
£ 547.30 £ 0.00
£ 4.55 £ 0.00
£ 4.55 £ 0.00
£ 137.50 £ 5.00
£ 45.00 £ 0.00
£ 11.40 £ 0.00
Total £ 82.79
03/24/2020 22:39:18 466431629.xls

CALCULATION SHEET

Weight of Minor Additives 84.29 Kg Weight of Barite 713.92 Kg


Volume of Minor Additives 66.45 L Volume of Wate 201.47 L
Volume of Oil Soluble Additi 48.79 L Weight of Salt 87.04 Kg
Volume of Brine 232.54 L Total Weight 1440.58 Kg
Volume of Base Oil 454.83 L Total Volume 1000.00 L
SG Check 1.44
03/24/2020 22:39:18 466431629.xls

433.16 DENSITY FACTOR FROM C10


03/24/2020 22:39:18 466431629.xls

ROM C10
03/24/2020 466431629.xls data-sheet

Date 2-Oct-96 Interval 8 1/2


Schlumberger Dowell File /Tender 211/12a SW1 Well ULTIDRILL
Operator B.P.Explorati Depth: Meters
Produced for Ocean Guardi Well TypeInjector
Input Data Additive Conc.per CU.M of Mud Quantities for

Additive Conc. ppb 1 BBL

Required Mud Density 624 ULTIDRILL EMUL HT 31.06 L 10.0 PPB 1


% oil 45.49% ULTIDRILL FL 0.00 L 0.0 PPB 0
% water 20.15% ULTIDRILL OW 0.00 L 0.0 PPB 0
Oil Ratio 70 ULTIDRILL S 11.43 L 4.0 PPB 1
Base OIl Density 0.778 ULTIDRILL LO-RM 1.40 L 0.5 PPB 1
Density Barite 2.9 ULTIDRILL VISTONE 14.29 L 5.0 PPB 1
Percent w/w Salt in Brine 25.19 LIME 22.86 L 8.0 PPB 1
Purity of Salt % 83.5 ULTIDRILL TRUVIS 0.00 L 0.0 PPB 0
Brine Density 1.241 ULTIDRILL TRUVIS HT 0.00 L 0.0 PPB 0
Oil Type Ultidrill ULTIDRILL DEFLOC 0.00 L 0.0 PPB 0
Salt Type CaCl2 IDCARB 150 0.00 L 0.0 PPB 0
Salt Content (mg/l) 312528 IDCARB 75 0.00 L 0.0 PPB 0
Chloride Content (mg/l) 200018 TRUFLO 100 5.71 L 2.0 PPB 1
Volume Mud 1 SOLTEX 0.00 L 0.0 PPB 0
Price Per bbl £82.79 GILSONITE 0.00 L 0.0 PPB 0
Calculation Area
Weight of Minor Additives 84.29 Kg Weight of Barite 713.92 Kg
Volume of Minor Additives 66OO LT Volume of Water 201OO LT

Volume of Oil Soluble Additives 49OO LT Weight of Salt 87.04 Kg

Volume of Brine 233OO LT Total Weight 1440.58 Kg

Volume of Base Oil 455OO LT Total Volume 1000OO LT

SG Check 1.44 pptf

Formulations 1M 3
350 mls Barrel Price List Comp.Price
WATER 201.47 L 70.52 0.201 bbl - -
BASE OIL 454.83 L 159.19 0.455 bbl £ 113.150 £ 51.47
SALT 87.04 L 30.46 30.5 ppb £ 8.84 £ 4.89
DOLOMITE 713.92 Kg 249.87 250.3 ppb £ 51.50 £ 5.85
ULTIDRILL EMUL HT 31.06 L 10.00 10.00 ppb £ 448.28 £ 11.07
ULTIDRILL FL 0.00 L 0.00 0.00 ppb £ 610.00 £ 0.00
ULTIDRILL OW 0.00 L 0.00 0.00 ppb £ 419.76 £ 0.00

Page 16
03/24/2020 466431629.xls data-sheet

ULTIDRILL S 11.43 L 4.00 4.00 ppb £ 11.50 £ 0.84


ULTIDRILL LO-RM 1.40 L 0.50 0.50 ppb £ 475.20 £ 0.53
ULTIDRILL VISTONE 14.29 L 5.00 5.00 ppb £ 30.45 £ 2.77
LIME 22.86 Kg 8.00 8.00 ppb £ 2.60 £ 0.38
ULTIDRILL TRUVIS 0.00 Kg 0.00 0.00 ppb £ 74.45 £ 0.00
ULTIDRILL TRUVIS HT 0.00 Kg 0.00 0.00 ppb £ 82.00 £ 0.00
ULTIDRILL DEFLOC 0.00 L 0.00 0.00 ppb £ 547.30 £ 0.00
IDCARB 150 0.00 Kg 0.00 0.00 ppb £ 4.55 £ 0.00
IDCARB 75 0.00 Kg 0.00 0.00 ppb £ 4.55 £ 0.00
TRUFLO 100 5.71 Kg 2.00 2.00 ppb £ 137.50 £ 5.00
SOLTEX 0.00 Kg 0.00 0.00 ppb £ 45.00 £ 0.00
GILSONITE 0.00 Kg 0.00 0.00 ppb £ 11.40 £ 0.00
Total £ 82.79

Page 17
03/24/2020 466431629.xls data-sheet

uantities for

omp.Price

Page 18
Additives

5.2

PRODUCT SELECTION SCREEN

Product SG Price Unit


Product per Unit
ULTIDRILL 0.778 £ 113.15 bbl
SALT PURITY % > 83.5 £ 8.84 25 Kg
DOLOMITE 2.900 £ 51.50 MT
ULTIDRILL EMUL HT 0.920 £ 448.28 200 L
ULTIDRILL FL 0.920 £ 610.00 200 L
ULTIDRILL OW 0.880 £ 419.76 200 L
ULTIDRILL S 1.060 £ 11.50 25 Kg
ULTIDRILL LO-RM 1.020 £ 475.20 200 L
ULTIDRILL VISTONE 1.800 £ 30.45 25 Kg
LIME 2.350 £ 2.60 25 Kg
ULTIDRILL TRUVIS 1.700 £ 74.45 25 Kg
ULTIDRILL TRUVIS HT 1.700 £ 82.00 25 Kg
ULTIDRILL DEFLOC 1.050 £ 547.30 200 L
IDCARB 150 2.710 £ 4.55 25 Kg
IDCARB 75 2.710 £ 4.55 25 Kg
TRUFLO 100 1.030 £ 137.50 25 Kg
SOLTEX 0.980 £ 45.00 25 Kg
GILSONITE 1.500 £ 11.40 25 Kg

REMEMBER TO CHANGE SG AND PRICE WHEN YOU SELECT NEW PROD

Page 19
Additives

Oil Soluble ? Mixed Weighting Agent Calculator


1 for yes Agent No. Name sg % w/w
0 for no Weighting Agent 1 Barite 4.250 50
Weighting Agent 2 Dolomite 3.900 50
Resultant Agent 3 Mix 4.075 100
1
1
1
1
1
0
0
0
0
1
0
0
1
1
0

SELECT NEW PRODUCTS !

Page 20
Additives

INTERDRILL EMUL HT
INTERDRILL FL
INTERDRILL OW
INTERDRILL S
INTERDRILL LO-RM
INTERDRILL VISTONE
LIME
INTERDRILL TRUVIS
INTERDRILL TRUVIS HT
INTERDRILL DEFLOC
IDCARB 150
IDCARB 75
TRUFLO 100
SOLTEX
GILSONITE

Schlumberger

Price List for Dowell Drilling Fluid Chemical


Product Unit
API Barite MT
OCMA Bentonite MT

Page 21
Additives

OCMA Bentonite 25 kg.sx.


BP-DCP 101 200 kg.dm.
BP-DCP 101 bulk, bbl
BP-DCP 208 200 kg.dm.
BP-DCP 208 bulk, bbl
BP-DCP 202 200 kg.dm.
BP-DCP 202 bulk, bbl
BP-DCP 503 200 kg.dm.
BP 83 HF bulk, bbl
Bridgesal Plus 25 kg.sx.
CaCl2 (77/80%) 25 kg.sx.
CaCl2 (80/82%) 25 kg.sx.
CaCl2 (92/95%) 25 kg.sx.
CaCl2 (85/88%) 25 kg.sx.
CaCl2 (82/85%) 25 kg.sx.
CaCl2 brine (1.35 sg) bulk, bbl
CMC HV Tech 25 kg.sx.
CMC LV Tech 25 kg.sx.
CMC HV Pure 25 kg.sx.
CMC LV Pure 25 kg.sx.
CF Lignosulphonate 25 kg.sx.
Caustic Soda 25 kg.sx.
PTS 200 25 kg.sx.
Citric Acid (PTS 300) 25 kg.sx.
Dirt Magnet 200 lt.dm.
Hogwash 200 lt.dm.
Biozan 25 kg.sx.
Guar Gum 25 kg.sx.
Gypsum 25 kg.sx.
Hymul G 25 lt.dm.
IDVIS 25 kg.sx.
IDF FLR 25 kg.sx.
IDF FLR XL 25 kg.sx.
IDFLO LT 25 kg.sx.
IDFLO 25 kg.sx.
IDFLO HTR 25 kg.sx.

Page 22
Additives

INTERDRILL EMUL HT 200 lt.dm.


INTERDRILL LO-RM 200 lt.dm.
INTERDRILL VISTONE 25 kg.sx.
INTERDRILL OW 200 lt.dm.
INTERDRILL OW 25 lt.dm.
INTERDRILL DEFLOC 200 lt.dm.
INTERDRILL S 25 kg.sx.
TRUVIS 25 kg.sx.
TRUVIS HT 25 kg.sx.
TRUFLO 100 25 kg.sx.
TRUDRILL S 25 kg.sx.
ULTIDRILL EMUL HT 200 lt.dm.
ULTIDRILL FL 200 lt.dm.
ULTIDRILL LO-RM 200 lt.dm.
ULTIDRILL OW 200 lt.dm.
ULTIDRILL OW 25 lt.dm.
ULTIDRILL DEFLOC 200 lt.dm.
ULTIDRILL BASE FLUID bulk, bbl
Gilsonite 25 kg.sx.
VISPEX 25 kg.sx.
FLOPLEX 25 kg.sx.
TRUPLEX 25 kg.sx.
ANTIFOAM A 25 lt.dm.
IDCIDE L 25 lt.dm.
IDCAP 25 kg.sx.
IDWASH 200 lt.dm.
IDFILM 220X 200 lt.dm.
IDSCAV 110 25 lt.dm.
IDSCAV ES 288 kg.dm.
IDSCAV 510 25 kg.sx.
IDLUBE XL 200 lt.dm.
IDLUBE 330 200 lt.dm.
IDHEC 25 kg.sx.
IDCARB 75 25 kg.sx.
IDCARB 75 bulk, MT
IDCARB 150 25 kg.sx.
IDCARB 150 bulk, MT
IDCARB CUSTOM 25 kg.sx.
KCl 25 kg.sx.

Page 23
Additives

KCl bulk, MT
KCl brine (80 ppb) bulk, bbl
KWIKCLEAN 200 lt.dm.
Kwikseal (F,M,C) 40 lb.sx
Lime 25 kg.sx.
Liquid Casing 25 lb.sx.
Liquid Scraper 200 lt.dm.
IDHEC Breaker 40 kg.dm.
NaCl Brine (10 ppg) bulk, bbl
NaCl 25 kg.sx.
NaCl bulk, MT
NaCl (PVD) 25 kg.sx.
NaCl (PVD) bulk, MT
Mica (F,M,C) 25 kg.sx.
OM Seal 40 lb.sx.
OM Fibre 40 lb.sx.
Proxel GXL 25 lt.dm.
Plugsal 25 kg.sx.
Plugsal XC 25 kg.sx.
Polytex HT 25 kg.sx.
Roemex 43/5
Roemex RX02 208 lt.dm.
Roemex RX08 55 gal.dm.
Roemex RX75 55 gal.dm.
Soda Ash 25 kg.sx.
Soda Bicarbonate 25 kg.sx.
Soltex 40 lb.sx.
Super Pickle 200 lt.dm.
XC Polymer 25 kg.sx.
XCD Polymer 25 kg.sx.
VENCHEM 208 25 kg.sx.
Wyoming Bentonie 25 kg.sx.
Xanvis 25 kg.sx.
Xanvis L 25 lt.dm.
Ultrafine Barite bulk, MT

Engineering per day

Page 24
Additives

EMUL HT ULTIDRILL EMUL HT


ULTIDRILL FL
ULTIDRILL OW
ULTIDRILL S
ULTIDRILL LO-RM
VISTONE ULTIDRILL VISTONE
LIME
ULTIDRILL TRUVIS
TRUVIS HT ULTIDRILL TRUVIS HT
DEFLOC ULTIDRILL DEFLOC
IDCARB 150
IDCARB 75
TRUFLO 100
SOLTEX
GILSONITE

Dowell

illing Fluid Chemicals


Unit Price
£53.00
£88.50

Page 25
Additives

£3.25
£341.50
£252.15
£254.00
£157.95
£296.65
£207.60
£339.00
£34.98
£31.50
£6.30
£7.50
£9.90
N/A
£8.84
£14.10
£34.20
£30.40
£66.80
£66.80
£12.46
£13.50
£38.45
£44.95
£605.00
£998.00
£242.50
£21.82
£4.10
£82.00
£171.45
£66.20
£66.20
£11.05
£11.95
£14.60

Page 26
Additives

£260.85
£381.00
£30.45
£225.20
£30.70
£390.60
£11.50
£74.45
£82.00
£137.50
£39.50
£448.28
£610.00
£475.20
£419.76
£42.96
£547.30
£113.15
£11.40
£94.30
£35.30
£137.00
£99.80
£96.50
£76.95
£96.50
£198.70
£28.60
£240.00
£252.00
£548.85
£365.00
£122.05
£4.55
£158.95
£4.55
£158.95
£4.55
£4.20

Page 27
Additives

£162.00
£5.90
£423.45
£11.65
£2.60
£29.75
£692.80
£152.95
£4.40
£2.40
£72.25
£2.55
£104.00
£8.50
£30.75
£26.70
£196.85
£201.00
£20.10
£93.40
£657.00
£722.60
£366.80
£188.95
£5.50
£6.95
£45.00
£512.25
£185.00
£190.30
£190.30
£4.85
£216.20
£173.35
£301.90

£375.00

Page 28
Help

Welcome to "MudMaker" !
Version 1.02

This programme is an integrated mud formulation and reporting package capab


costings and Well Programme Summaries. It is designed for ease of use with fun
of each screen which allow you to "navigate" around the various data entry and

DATA ENTRY SCREEN


This is the central data entry screen and should be filled out completely before
To Use:
1. Fill in the Well information box at the top left of the screen
2. Fill in the "Mud Properties - Data Entry Box" in the lower left of the screen DO NOT FIL
as they are calculated for you by the programme
3. Press the "Choose Additives" button form the top left corner of the screen
4. You may select either "Core Interdrill" or "Core Ultidrill" buttons and enter the UNIT PRIC
5. Return to the Data Entry Screen
6. Use the "Additive Concentration" box on the top right of the screen to enter the require
7. You can now select any of the other major functions e.g. "Formulation/Cost per bbl" or "

ANALYZE COSTS/MARGINS
This screen allows you to calculate Total and component margins of the mud for
To Use:
1. Fill in the Unit Cost column for the components used in the formulation. The Margin will

MATERIAL QUANTITIES
This screen calculates the quantities of component products required to produc
1. No data entry is required in this screen , it is for view and print only. Mud Volume is cho

HOLE AND CASING VOLUME


This screen calculates the volumes of the Riser , Casing and Open Hole of the we
1. Enter the Depth data in columns 2 and 3 and the Tubular/hole diameters in columns 4 a
column 6.

PROGRAMME SUMMARY
This function allows you to create PROGRAMME SUMMARIES

Page 29
Help

This programme is "Stand Alone" I.e. you do not need to use the other programme functio
the Programme Summary format.
1. Enter the Well Data and Interval Data at the top of the sheet. Make sure you enter the
interval length from #,### ft to #,### ft. As this calculates hole data below.
2. You may find it useful to use "Hole and Casing Volume" to generate the volumes requi
section , although note Open Hole Volume is already calculated for you.
3. The Section Comments box is accessed by double clicking the mouse in the center of
comments as required.
4. Recommended Mud Formulation , Chemical Requirements and Contingency Chemicals
menus with the standard Mud Chemicals available. If an additive is not shown , simply
to the right of the first Summary Sheet
5. Unit sizes are accessed by drop down menus in the same way.
6. Each of the three summary sheets can be completed to give an overall well programm
pressing the PRINT button

Page 30
Help

ackage capable of providing formulations,


of use with function bars located at the top
ata entry and reporting screens.

letely before you move to other major functions

n DO NOT FILL IN THE UNDERLINED ENTRIES

er the UNIT PRICE of each product

nter the required PPB CONCENTRATIONS


ost per bbl" or "Print Data Sheet" as required

of the mud formulation

The Margin will be calculated automatically

red to produce the formulation specified


d Volume is chosen on the "Data Entry Screen"

Hole of the well being programmed


s in columns 4 and 5. The volumes are displayed in

Page 31
Help

gramme functions in order to take advantage of

e you enter the Interval Size e.g. 17 1/2" and the

e volumes required for the Mud Volume Estimates

n the center of the box. You may then type

ency Chemicals , are all accessed by drop down


shown , simply add it to the bottom of the list shown

well programme and may be printed out by

Page 32
Sheet4

CALCIUM CHLORIDE BRINE TABLE

Wt % CaCl2 CaCl2 mg/l Chloride mg/l Activity Water Density


0.0 0 0 1.050 1.000
0.5 5021 3212 1.042 1.004
1.0 10084 6452 1.035 1.008
1.5 15189 9718 1.028 1.013
2.0 20337 13012 1.021 1.017
2.5 25528 16333 1.015 1.021
3.0 30763 19682 1.009 1.025
3.5 36041 23059 1.003 1.030
4.0 41363 26464 0.998 1.034
4.5 46730 29898 0.993 1.039
5.0 52142 33360 0.988 1.043
5.5 57599 36851 0.983 1.047
6.0 63101 40372 0.979 1.052
6.5 68650 43922 0.974 1.056
7.0 74245 47501 0.970 1.061
7.5 79886 51111 0.966 1.065
8.0 85574 54750 0.961 1.070
8.5 91310 58420 0.957 1.074
9.0 97094 62120 0.953 1.079
9.5 102925 65851 0.949 1.084
10.0 108805 69613 0.945 1.088
10.5 114734 73406 0.941 1.093
11.0 120712 77231 0.936 1.098
11.5 126739 81087 0.932 1.102
12.0 132816 84975 0.928 1.107
12.5 133943 88895 0.923 1.112
13.0 145121 92848 0.919 1.117
13.5 151350 96833 0.914 1.121
14.0 157630 100851 0.909 1.126
14.5 163962 104902 0.904 1.131
15.0 170346 108936 0.899 1.136

Page 33
Sheet4

15.5 176782 113104 0.893 1.141


16.0 183270 117256 0.888 1.146
16.5 189812 121441 0.882 1.151
17.0 196407 125661 0.876 1.156
17.5 203056 129914 0.870 1.161
18.0 209759 134203 0.864 1.166
18.5 216517 138527 0.857 1.171
19.0 223329 142885 0.850 1.176
19.5 230197 147279 0.843 1.181
20.0 237120 151708 0.836 1.186
20.5 244099 156173 0.829 1.191
21.0 251134 160675 0.821 1.196
21.5 258226 165212 0.810 1.201
22.0 265375 169786 0.805 1.207
22.5 272581 174396 0.796 1.212
23.0 279845 179044 0.787 1.217
23.5 287167 183723 0.778 1.222
24.0 294159 188156 0.769 1.227
24.5 301474 192835 0.760 1.232
25.0 309484 198007 0.750 1.238
25.5 317042 202942 0.740 1.244
26.0 324659 207716 0.730 1.249
26.5 332037 212628 0.720 1.255
27.0 340037 217578 0.709 1.260
27.5 347874 222568 0.698 1.266
28.0 344734 227597 0.687 1.271
28.5 363656 232666 0.676 1.277
29.0 371640 237774 0.664 1.282
29.5 379686 242921 0.653 1.288
30.0 387798 248109 0.641 1.293
30.5 395967 253338 0.629 1.299
31.0 404202 258607 0.617 1.304
31.5 412501 263916 0.605 1.310
32.0 420964 269267 0.592 1.316
32.5 429291 274659 0.580 1.322
33.0 437784 280092 0.567 1.327

Page 34
Sheet4

33.5 446341 285567 0.555 1.333


34.0 454964 291084 0.542 1.339
34.5 463653 296643 0.529 1.345
35.0 472408 302244 0.517 1.350
35.5 481230 307889 0.504 1.356
36.0 490118 313575 0.491 1.362
36.5 499074 319305 0.478 1.368
37.0 508098 325079 0.466 1.374
37.5 517189 330895 0.453 1.380
38.0 526349 336756 0.441 1.386
38.5 535578 342660 0.428 1.392
39.0 544876 348609 0.416 1.398
39.5 554243 354602 0.404 1.404
40.0 563680 360640 0.392 1.410
0.97827099134 1.0086475063
0.99 0.9987678918

Page 35
Sheet4

Actual vs Calculated Density

1.400

Density Calc
0.999
1.003 1.350

1.007
1.012
1.016
1.300
1.021
1.025
1.029
1.034 1.250

1.038
1.043
1.047
Density of Brine

1.200 Column E
1.052 Column F
1.056
1.061
1.065
1.150
1.070
1.075
1.079
1.084 1.100

1.089
1.093
1.098
1.050
1.103
1.107
1.112
1.117 1.000
123456789111111111122222222223333333333444444444455555555556666666666777777777788
1.122 0 12 3 45 67 8 9 0 1 2 3 45 67 89 0 1 2 3 4 5 6 7 89 0 12 34 56 7 8 9 0 1 2 3 4 56 78 90 1 2 3 4 5 6 7 8 9 01 23 45 6 7 8 9 0 1

1.127
1.132
1.136

Page 36
Sheet4

1.141
1.146
1.151
1.156
1.161
1.166
1.171
1.176
1.181
1.186
1.192
1.197
1.202
1.207
1.212
1.218
1.223
1.228
1.233
1.239
1.244
1.249
1.255
1.260
1.266
1.271
1.277
1.282
1.288
1.293
1.299
1.304
1.310
1.316
1.321
1.327

Page 37
Sheet4

1.333
1.338
1.344
1.350
1.356
1.362
1.368
1.373
1.379
1.385
1.391
1.397
1.403
1.409

Page 38
Sheet4

Column E
Column F

6 66 6 6 6 6 6 6 77 77 77 7 7 7 7 8 8
1 23 4 5 6 7 8 9 01 23 45 6 7 8 9 0 1

Page 39
Sheet4

Calcium C

12

10

ActivityCaCl2
Waterwt % Density

Page 40
Sheet4

Calcium Chloride Table

ActivityCaCl2
Waterwt % Density

Page 41
Sheet5

SODIUM CHLORIDE BRINE TABLE


Properties at 20 C. , except Water Activity at 25 C.

Wt % NaCl NaCl mg/l Chloride mg/l Activity Water Density


0 0.00 0.00 1.000 0.998
2 20.25 12.31 0.989 1.014
4 41.14 24.96 0.976 1.029
6 62.59 37.98 0.964 1.043
8 84.62 51.35 0.950 1.058
10 107.26 60.68 0.935 1.073
12 130.51 79.20 0.919 1.088
14 154.39 93.68 0.901 1.103
16 178.91 108.57 0.882 1.118
18 204.10 123.84 0.861 1.339
20 229.96 139.54 0.839 1.150
22 265.52 155.66 0.815 1.166
24 283.80 172.21 0.788 1.183
26 311.82 189.21 0.759 1.199

Page 42
Sheet5

Final Volume
1.000
1.006
1.013
1.020
1.028
1.036
1.045
1.054
1.065
1.076
1.087
1.099
1.113
1.127

Page 43
Volumes

Product Formulation Quantity Unit Units


per bbl Required Required
WATER 32.03 L 32 L bbl 0 BBL
BASE OIL 72.32 L 72 L bbl 0 BBL
SALT 13.84 Kg 14 Kg 25 Kg 1
DOLOMITE 113.52 Kg 114 Kg 1T 0.1 T
ULTIDRILL EMUL HT 4.94 L 5L 200 L 1
ULTIDRILL FL 0.00 L 0L 200 L 0
ULTIDRILL OW 0.00 L 0L 200 L 0
ULTIDRILL S 1.82 Kg 2 Kg 25 Kg 1
ULTIDRILL LO-RM 0.22 L 0L 200 L 1
ULTIDRILL VISTONE 2.27 Kg 2 Kg 25 Kg 1
LIME 3.63 Kg 4 Kg 25 Kg 1
ULTIDRILL TRUVIS 0.00 Kg 0 Kg 25 Kg 0
ULTIDRILL TRUVIS HT 0.00 Kg 0 Kg 25 Kg 0
ULTIDRILL DEFLOC 0.00 L 0L 200 L 0
IDCARB 150 0.00 Kg 0 Kg 25 Kg 0
IDCARB 75 0.00 Kg 0 Kg 25 Kg 0
TRUFLO 100 0.91 Kg 1 Kg 25 Kg 1
SOLTEX 0.00 Kg 0 Kg 25 Kg 0
GILSONITE 0.00 Kg 0 Kg 25 Kg 0

CaCl2 Liquor 1.000 bbl 1 bbl bbl 1 bbl


DRILL WATER -0.799 bbl -1 bbl bbl -1 BBL

Plant Mixing Request

Page 44
VolumesQuantities
Material
2-Oct-96 Interval 8 1/2
File /Tender 211/12a SW1 Well ULTIDRILL
Operator B.P.Exploration Depth units Meters
Produced for Ocean Guardian Well Type Injector Volume 1 bbl
Properties Required
Wt 624 PV ALAP Cl- 120-170
Oil Ratio 70 YP 18-24

Page 45
Revision : 03/24/2020

Schlumberger Dowell

B.P.Exploration

211/12a SW1

Drilling Fluid Programme Summary

Hole Section 8 1/2 Depth : 4095 to

Mud Type : Ultidrill Meters Maximum Inclination 45

SECTION COMMENTS
The 8 1/2" section will be drilled with ULTIDRILL synthetic based mud. This section has the same mud weight of 1.55 s.g. as the
previous 12 1/4" section. The mud weight of 1.63 s.g. is designed as being 200 psi above the P50 Upper MSM pressure case of
6,600 psi (with the riser off , 475 psi with the riser on). This applied pressure of 7075 psi is below the P05 formation pressure
case of 7,500 psi. If this pressure is encountered the mud weight will be raised to a maximum of 1.85 s.g. resulting in the 7"
drilling liner being set in the B Shale between the upper and lower MSM. If the mud weight of 1.63 s.g. can be maintained both
the upper and lower MSM will be drilled and the liner will be set in the LKCF Shale above the LK80. IDCARB sweeps should be
run every stand (30 bbls 40 ppb IDCARB 75/150) and fluid loss should be maintained below 2.0 mls using Soltex and TRUFLO
100.

RECOMMENDED MUD PROPERTIES RECOMMENDED MUD FORMULATION

Mud Weight 1.63 pptf ULTIDRILL BASE FLUID 0.461 bbl

Plastic Viscosity 35-45 cps WATER 0.254 bbl


Yield Point 18-24 lbs/100ft 2
CALCIUM CHLORIDE (83%) 28.2 lb
Oil / Water Ratio 65/35 BARITE 301.0 lb
HTHP Fluid Loss @ 250F <2.0 mls ULTIDRILL EMUL HT 10.0 lb
Electrical Stability >400 Volts LIME 8.0 lb
Gels 6-15 / 15-35 lbs/100ft 2
SOLTEX 4.0 lb
Max LGS (drilled) <6.0 % TRUVIS HT 4.0 lb
Yield Stress 10 minimum TRUFLO 100 1.5 lb
WPS 120-170 g/l
0.0 lb

POTENTIAL PROBLEMS CHEMICAL REQUIREMENTS QUANTITY


ULTIDRILL MUD 1,881
1. Stuck pipe - maintain low LGS as possible run
IDCARB sweeps ULTIDRILL BASE FLUID 400
2. Good hole cleaning practises. Flow rate should ULTIDRILL EMUL HT 16
be maintained @ 450 gpm.
LIME 120
TRUVIS HT 80
SOLTEX 120
TRUFLO 100 120
MUD VOLUME ESTIMATES CONTINGENCY CHEMICALS QUANTITY
Surface Volume 400 BBL ULTIDRILL LO-RM 4
Riser Volume 324 BBL ULTIDRILL DEFLOC 4
Casing Volume 961 BBL BARITE
Open Hole Volume 64 BBL MICA (M/F) 80
Maximum circulating Volume 1,749 BBL LIQUID CASING 80
Mud Usage 0.47 132 BBL TRUVIS HT 80
Total Section Volume Require 1,881 BBL OM SEAL 80
Technical Approval For Dowell
(Signature) (Signature)
Revision : 03/24/2020
COMMENTS ULTIDRILL OW 8
ULTIDRILL BASE FLUID 300
CALCIUM CHLORIDE (83%) 120
IDCARB 75 240
IDCARB 150 240

T
h
i
s

i
n
t
e
r
v
a
l
w
i
l ULTIDRILL BASE FLUID
l WATER
bCALCIUM CHLORIDE (83%)
eBARITE

dULTIDRILL EMUL HT
r TRUVIS HT
i ULTIDRILL LO-RM
l
LIME
l
eGILSONITE
d

w
i
t1xULTIDRILL
bbls MUD
h
. xULTIDRILL
bbls BASE FLUID

tOxULTIDRILL
200 l Drm. EMUL HT

h
v ULTIDRILL
x 200 l Drm. LO-RM
e
exTRUVIS
25 Kg HT
sx.
r LIME
x 25 Kg sx.
U
p
L x MT.
BARITE
r
T
e
IsxULTIDRILL
200 l Drm. OW
D
sxULTIDRILL
200 l Drm. DEFLOC
R
u
Ir BARITE
as required
L
e
LTechnical Approval For Dowell
d(Signature) (Signature)
s
Is
D
s
R
uRevision : 03/24/2020
Ir BARITE
as required
L
exMICA
25 Kg(M/F)
sx.
L
dxOM40 SEAL
lb sx.

s xTRUVIS
25 Kg HT
sx.
"
y
SxULTIDRILL
200 l Drm. LO-RM
s
t LIME
x 25 Kg sx.
ti
xULTIDRILL
bbls BASE FLUID
e
c
m
k CALCIUM
x 25 Kg sx.CHLORIDE (83%)
.yxLIQUID
25 lb sx.
CASING
"
T
h
s
e
h
a
s
l
y
e
s
s
t
e
-
m

w
i
l
l
b
c
e
a
r
u
e
s
f
e
u
d
l
m
a
a
fi
tn
e
t
re
n
a
a
n
w
c
ie
n
d
o
o
f
w
W
h
P
a
S
s
2
.
b
e
D
e
i
n
f
f
c
e
u
r
te
n
it
n
i
a
tl
hTechnical Approval For Dowell
s(Signature) (Signature)
e
t
n
it
iRevision :
n 03/24/2020
a
tl
h
s
e
t
i
1
c
3
k
i
3
n
/g
8
"-

c
L
a
G
s
S
i
n
c
g
o
.n
t
D
e
rn
it
lH
lP
iH
n
T
g
f
w
l
iu
li
ld
c
o
l
m
o
m
s
e
s
n
c
a
e
n
d
w
if
ti
h
l
t
a
e
r
m
u
c
d
a
k
w
e
e
3
i.
g
h
S
tu
r
o
f
fa
c
6
e
7
5
LTechnical Approval For Dowell
o(Signature) (Signature)
p
s
o
f
fa
cRevision : 03/24/2020
6
e
7
5
L
o
p
s
p
s
te
fs

,-

tm
h
o
e
n
n
i
t
g
o
rr
a
i
d
n
u
g
a
lo
lf
y
s
iu
n
r
c
f
ra
e
c
a
e
s
e
e
d
q
u
ti
o
p
m
6
e
9
n
0
t

p
p
t
f

b
e
f
o
r
e

4
,
5
0
0

f
t
.

T
h
iTechnical Approval For Dowell
s(Signature) (Signature)
t
.
Revision : 03/24/2020
T
h
i
s

m
u
d

w
e
i
g
h
t

s
h
o
u
l
d

b
e

m
a
i
n
t
a
i
n
e
d

u
n
t
i
l
s
e
v
e
r
a
l
h
u
n
d
r
e
d

f
e
e
t

a
b
o
v
eTechnical Approval For Dowell
(Signature) (Signature)
t
a
bRevision : 03/24/2020
o
v
e

t
h
e

T
a
y

s
a
n
d
s

(
u
n
l
e
s
s

h
o
l
e

c
o
n
d
i
t
i
o
n
s

d
i
c
t
a
t
e
)

t
h
e
n

i
n
c
r
e
a
s
e
dTechnical Approval For Dowell
(Signature) (Signature)
t
r
e
aRevision : 03/24/2020
s
e
d

t
o

7
0
0

7
1
0

p
p
t
f
.

H
i
g
h

m
u
d

o
v
e
r
b
a
l
a
n
c
e

i
n
c
r
e
a
s
e
s

t
h
e

r
i
s
k

o
f

dTechnical Approval For Dowell


i(Signature) (Signature)
f
k

oRevision : 03/24/2020
f

d
i
f
f
e
r
e
n
t
i
a
l
s
t
i
c
k
i
n
g

t
h
e
r
e
f
o
r
e
,

c
a
r
e

m
u
s
t

b
e

t
a
k
e
n

t
o

m
i
n
i
m
i
s
e

L
G
Technical Approval For Dowell
S
(Signature) (Signature)
a
s
e
Revision : 03/24/2020
L
G
S

a
n
d

e
n
s
u
r
e

l
o
w

f
l
u
i
d

l
o
s
s

a
n
d

t
i
g
h
t

f
i
l
t
e
r

c
a
k
e

p
r
o
p
e
r
t
i
e
s
.

T
h
Technical Approval For Dowell
e
(Signature) (Signature)
d
s
.
Revision : 03/24/2020
T
h
e

d
e
v
i
a
t
i
o
n

m
a
k
e
s

g
o
o
d

h
o
l
e

c
l
e
a
n
i
n
g

p
r
i
o
r
i
t
y
,

p
e
r
i
o
d
i
c

u
s
e

o
f
Technical Approval For Dowell
l(Signature) (Signature)
o
s
e
Revision : 03/24/2020
o
f

l
o
w

w
e
i
g
h
t

s
w
e
e
p
s

a
n
d

h
o
l
e

c
i
r
c
u
l
a
t
i
o
n

(
3

b
o
t
t
o
m
s

u
p
)

s
h
o
u
l
d

bTechnical Approval For Dowell


e(Signature) (Signature)
o
u
lRevision : 03/24/2020
d

b
e

m
a
d
e
.

Technical Approval For Dowell


(Signature) (Signature)
Revision : 03/24/2020

PRODUCT LISTING
1 ULTIDRILL BASE FLUID
4376 22 CALCIUM CHLORIDE (83%)
deg 2 BARITE
3 ULTIDRILL EMUL HT
same mud weight of 1.55 s.g. as the Check Data 4 ULTIDRILL FL
he P50 Upper MSM pressure case of
below the P05 formation pressure 624.00 Density 12 ULTIDRILL OW
um of 1.85 s.g. resulting in the 7"
of 1.63 s.g. can be maintained both 64% Oil 17 ULTIDRILL S
e LK80. IDCARB sweeps should be
w 2.0 mls using Soltex and TRUFLO 36% Water 10 ULTIDRILL LO-RM
16 VISTONE
11 TRUVIS HT
11
Current Formulation Data LIME

WATER 0.201 bbl 19 ULTIDRILL DEFLOC


BASE OIL 0.455 bbl 1 IDCARB 150

SALT 30.5 lb 4 IDCARB 75


DOLOMITE 250.3 lb 12 TRUFLO 100
ULTIDRILL EMUL HT 10.0 lb 10 SOLTEX
ULTIDRILL FL 0.0 lb 17 GILSONITE
ULTIDRILL OW 0.0 lb 16 ULTIDRILL MUD
ULTIDRILL S 4.0 lb ULTIDRILL BASE FLUID
ULTIDRILL LO-RM 0.5 lb 8 ULT.MUD (from last section)
ULTIDRILL VISTONE 5.0 lb 13 WATER
LIME 8.0 lb 3 MICA (M/F)
ULTIDRILL TRUVIS 0.0 lb 23 OM SEAL
QUANTITY ULTIDRILL TRUVIS 0.0 lb 25 LIQUID CASING
x bbls ULTIDRILL DEFLOC 0.0 lb 10 DOLOMITE
x bbls IDCARB 150 0.0 lb 24
x 200 l Drm. IDCARB 75 0.0 lb 6 UNIT of QUANTITY
x 25 Kg sx. TRUFLO 100 2.0 lb 1 x 25 Kg sx.
x 25 Kg sx. SOLTEX 0.0 lb 2 x 200 l Drm.
x 25 Kg sx. GILSONITE 0.0 lb 15 x 40 lb sx.
x 25 Kg sx. 14 x 25 lb sx.
QUANTITY x MT.
x 200 l Drm. 8 x bbls
x 200 l Drm. 6 as required
as required 2 x bbls
x 25 Kg sx. Check Data 1
x 25 lb sx. 324 bbl Riser 1
x 25 Kg sx. 961 bbl Casing 1 & 2 1
x 40 lb sx. 1
Technical Approval For Dowell
(Signature) (Signature)
Revision : 03/24/2020
x 200 l Drm.
x bbls 2
x 25 Kg sx. 2
x 25 Kg sx. 7
x 25 Kg sx. 1
4
1
3
2
8
1
1
1

Technical Approval For Dowell


(Signature) (Signature)
Revision : 03/24/2020

This section will be drilled with a Pseudo Oil Based


lower environmental impact. Offset data indicates
the largely undifferentiated Nordaland / Hordaland
substantially reduce the potential for pressure rel
the stability of the Hordaland / Nordaland Shales.
mg/l to maintain hole stability whilst preventing fo
in the recommended range will ensure efficient ho
imperative that surface losses are kept to a minim

ULTIDRILL EM

Technical Approval For Dowell


(Signature) (Signature)
Revision : 03/24/2020

a Pseudo Oil Based mud which has the performance of an oil based mud but with
ffset data indicates that there should be no hole problems whilst drilling through
daland / Hordaland Shales. The use of Ultidrill will eliminate clay hydration and
al for pressure related instability. The mud weight gradient will also help ensure
Nordaland Shales. The water phase will be maintained in the range 160 mg/l to 180
whilst preventing formation embrittlement. Maintaining the rheology and flow rate
ensure efficient hole cleaning. Due to the high cost of the Ultidrill POBM it is
are kept to a minimum

ULTIDRILL EMUL HT

Technical Approval For Dowell


(Signature) (Signature)
Sheet8

Hole and Casing Volume Calculator

Meters From To OD ID
Riser 0 214 24.000 in 22.000 in
Casing 1 214 4430 9.625 in 8.535 in
Casing 2 (if applicable) 0 0 7.000 in 6.184 in
Rat Hole 0 0 0.000 in 0.000 in
Open Hole 4430 5089 8.500 in 8.500 in
Total Displacement

Weight up Calculations ppg


DOLOMITE Actual Desired Volume sg
14 15 100 2.9

Page 63
Sheet8

Volume
324 BBL
961 BBL
0 BBL
0 BBL
149 BBL
1,434 BBL

ppb MT
111 ppb 5 24.157
1014.594
319.7

Page 64
WBM Window

Schlumberger Dowell

Well : 211/12a SW1 8 1/2 Section

WBM Costing

Formulation for 2,650 BBL Guar Polymer Sweeps

Product ConcentrationQuantity Units Qty Units Unit Cost


Seawater 1.00 bbl 2,650 bbl x bbls 2650 £ -
Guar Gum 3.0 PPB 7950 lb 25 Kg sx 145 £ 21.82

Total
Price/bbl
Formulation for 4,671 BBL Bentonite Mud

Product ConcentrationQuantity Units Qty Units Unit Cost


Seawater 0.40 bbl 1,868 bbl x bbls 1868 £ -
Drill Water 0.40 bbl 1,868 bbl x bbls 1868 £ -
Caustic 0.5 PPB 2336 lb 25 Kg kegs 42 £ 13.50
Soda Ash 0.3 PPB 1168 lb 25 Kg sx 21 £ 5.50
Bentonite 15.0 PPB 70065 lb MT 32 £ 88.50
Barite 62.0 PPB 289602 lb 25 Kg sx 132 £ -
Total
Price/bbl
WBM Window

Cost per bbl (average)

Windowed Consumption 9

Section Length 745

Windowed Cost
WBM Window

Schlumberger

Price List for Dowell Drilling Fluid Chemicals


Product Unit
API Barite MT
OCMA Bentonite MT
OCMA Bentonite 25 kg.sx.
BP-DCP 101 200 kg.dm.
BP-DCP 101 bulk, bbl
BP-DCP 208 200 kg.dm.
BP-DCP 208 bulk, bbl
BP-DCP 202 200 kg.dm.
Sub Total BP-DCP 202 bulk, bbl
£ - BP-DCP 503 200 kg.dm.
£ 3,153.98 BP 83 HF bulk, bbl
Bridgesal Plus 25 kg.sx.

CaCl2 (77/80%) 25 kg.sx.


CaCl2 (80/82%) 25 kg.sx.
£ 3,153.98 CaCl2 (92/95%) 25 kg.sx.
£ 1.19 CaCl2 (85/88%) 25 kg.sx.
CaCl2 (82/85%) 25 kg.sx.
CaCl2 brine (1.35 sg) bulk, bbl
Sub Total CMC HV Tech 25 kg.sx.
£ - CMC LV Tech 25 kg.sx.
£ - CMC HV Pure 25 kg.sx.
£ 573.26 CMC LV Pure 25 kg.sx.
£ 116.78
£ 2,818.52 CF Lignosulphonate 25 kg.sx.
£ - Caustic Soda 25 kg.sx.
£ 3,508.56 PTS 200 25 kg.sx.
£ 0.75 Citric Acid (PTS 300) 25 kg.sx.
Dirt Magnet 200 lt.dm.
Hogwash 200 lt.dm.
£ 6,662.54 Biozan 25 kg.sx.
WBM Window

Guar Gum 25 kg.sx.


£ 0.91 Gypsum 25 kg.sx.
Hymul G 25 lt.dm.
bpm IDVIS 25 kg.sx.
IDF FLR 25 kg.sx.
m IDF FLR XL 25 kg.sx.
IDFLO LT 25 kg.sx.
£ 6,101.55 IDFLO 25 kg.sx.
IDFLO HTR 25 kg.sx.
INTERDRILL EMUL HT 200 lt.dm.
INTERDRILL DEFLOC 200 lt.dm.
INTERDRILL S 25 kg.sx.
TRUVIS 25 kg.sx.
TRUVIS HT 25 kg.sx.
TRUFLO 100 25 kg.sx.
TRUDRILL S 25 kg.sx.
ULTIDRILL EMUL HT 200 lt.dm.
ULTIDRILL FL 200 lt.dm.
ULTIDRILL LO-RM 200 lt.dm.
ULTIDRILL OW 200 lt.dm.
ULTIDRILL OW 25 lt.dm.
ULTIDRILL DEFLOC 200 lt.dm.
ULTIDRILL BASE FLUID bulk, bbl
Gilsonite 25 kg.sx.
VISPEX 25 kg.sx.
FLOPLEX 25 kg.sx.
TRUPLEX 25 kg.sx.
ANTIFOAM A 25 lt.dm.
IDCIDE L 25 lt.dm.
IDCAP 25 kg.sx.
IDWASH 200 lt.dm.
IDFILM 220X 200 lt.dm.
IDSCAV 110 25 lt.dm.
IDSCAV ES 288 kg.dm.
IDSCAV 510 25 kg.sx.
IDLUBE XL 200 lt.dm.
WBM Window

IDLUBE 330 200 lt.dm.


IDHEC 25 kg.sx.
IDCARB 75 25 kg.sx.
IDCARB 75 bulk, MT
IDCARB 150 25 kg.sx.
IDCARB 150 bulk, MT
IDCARB CUSTOM 25 kg.sx.
KCl 25 kg.sx.
KCl bulk, MT
KCl brine (80 ppb) bulk, bbl
KWIKCLEAN 200 lt.dm.
Kwikseal (F,M,C) 40 lb.sx
Lime 25 kg.sx.
Liquid Casing 25 lb.sx.
Liquid Scraper 200 lt.dm.
IDHEC Breaker 40 kg.dm.
NaCl Brine (10 ppg) bulk, bbl
NaCl 25 kg.sx.
NaCl bulk, MT
NaCl (PVD) 25 kg.sx.
NaCl (PVD) bulk, MT
Mica (F,M,C) 25 kg.sx.
OM Seal 40 lb.sx.
OM Fibre 40 lb.sx.
Proxel GXL 25 lt.dm.
Plugsal 25 kg.sx.
Plugsal XC 25 kg.sx.
Polytex HT 25 kg.sx.
Roemex 43/5
Roemex RX02 208 lt.dm.
Roemex RX08 55 gal.dm.
Roemex RX75 55 gal.dm.
Soda Ash 25 kg.sx.
Soda Bicarbonate 25 kg.sx.
Soltex 40 lb.sx.
Super Pickle 200 lt.dm.
XC Polymer 25 kg.sx.
XCD Polymer 25 kg.sx.
Wyoming Bentonie 25 kg.sx.
WBM Window

Xanvis 25 kg.sx.
Xanvis L 25 lt.dm.
Ultrafine Barite bulk, MT

Engineering per day


WBM Window

Dowell

illing Fluid Chemicals


Unit Price
£53.00
£88.50
£3.25
£341.50
£252.15
£254.00
£157.95
£296.65
£207.60
£339.00
£34.98
£31.50

£6.30
£7.50
£9.90
N/A
£8.84
£14.10
£34.20
£30.40
£66.80
£66.80

£12.46
£13.50
£38.45
£44.95
£605.00
£998.00
£242.50
WBM Window

£21.82
£4.10
£82.00
£171.45
£66.20
£66.20
£11.05
£11.95
£14.60
£260.85
£390.60
£11.50
£74.45
£82.00
£137.50
£39.50
£448.28
£610.00
£475.20
£419.76
£42.96
£547.30
£113.15
£11.40
£94.30
£35.30
£137.00
£99.80
£96.50
£76.95
£96.50
£198.70
£28.60
£240.00
£252.00
£548.85
WBM Window

£365.00
£122.05
£4.55
£158.95
£4.55
£158.95
£4.55
£4.20
£162.00
£5.90
£423.45
£11.65
£2.60
£29.75
£692.80
£152.95
£4.40
£2.40
£72.25
£2.55
£104.00
£8.50
£30.75
£26.70
£196.85
£201.00
£20.10
£93.40
£657.00
£722.60
£366.80
£188.95
£5.50
£6.95
£45.00
£512.25
£185.00
£190.30
£4.85
WBM Window

£216.20
£173.35
£301.90

£375.00
Sheet9

Schlumberger Dowell

MudMaker

Page 75
Sheet9

Page 76
Sheet9

Page 77
Sheet9

Page 78
Sheet10

Schlumberger Dowell

B.P.Exploration
211/12a SW1

Dilling Fluid Programme Summary

Hole Section 8 1/2 Depth : to 1005

Mud Type : Sea Water & HI-Vis sweeps Maximu 0 deg

SECTION COMMENTS
This section will be drilled with sea water and HIVIS guar gum sweeps. A 50 bbl hivis sweeps should be pumped every 15
M (at connections and half way between connections) or more frequently if hole conditions dictate. The open hole should
be filled with 1.20 s.g. Bentonite mud prior to running the casing. This will stabilise the hole and help prevent fill. The
bentonite mud should be prehydrated at 30 ppb gel and cut back with SW prior to being required. 1635 bbls of Bentonite
will be required to displace the hole at TD. Pit management for Bentonite premix and whole mud should be carefully
calculated prior to the job and the volume required for a check trip factored in. IDVIS may be used to build viscosity and
additional mud if time limitations become a problem.

RECOMMENDED MUD PROPERTIES RECOMMENDED MUD FORMULATION

Guar Gum Sweeps Formulation Guar sweeps Bentonite

Yield Point 45 - 55 lbs/100ft2 Seawater 1.00 bbl 0.40 bbl


Density 1.02 s.g. Bentonite 0.00 bbl 15.00 ppb
pH 7.0 +/- Soda Ash 0 0.25 ppb
Caustic 0 0.50 ppb
Bentonite Displacement Slurry Drill Water 0 bbl 0.4 bbl
Yield Point 40 - 50 lbs/100ft2 Barite 0 62 ppb
Density 1.15 s.g. Guar Gum 3 ppb 0
PV 40 cP
Gels 10/20 lbs/100ft2
pH 9.5 - 10
POTENTIAL PROBLEMS CHEMICAL REQUIREMENTS
Hole Cleaning - 50 bbl hivis pills will be pumped every 10m ,
flow rates should be maintained at 1100 gpm. Barite as required
Cement blocks whilst drilling 30" shoe - Increase sweep
frequency and size during cement drilling. Drill Water 2000 bbls
Surface Volume Logistics - Careful planning of pit space
prior to the start of the job in order to maintain sufficient Bentonite 32 MT
bentonite mud volumes
Guar Gum 144 x 25 Kg sx
Caustic 45 x 25 Kg sx

Technical Authority For Dowell


(Signiture) (signiture)
Cement blocks whilst drilling 30" shoe - Increase sweep
frequency and size during cement drilling.
Surface Volume Logistics - Careful planning of pit space
prior to the start of the job in order to maintain sufficient
bentonite mud volumes
Sheet10

Soda Ash 23 x 25 Kg sx

MUD VOLUME ESTIMATES CONTINGENCY CHEMICALS

Estimated Usage Guar sweeps is based upon Barite 100 MT


drilling 60 m with 50 bbl sweeps every 15m Drill Water 1000 bbls
Estimated usage Bentonite mud is based upon Bentonite 50 MT
displacing the open hole twice + 30% excess. Guar Gum 40 x 25 Kg sx
Estimated Usage 2,650 bbl Guar Sweeps Caustic 20 x 25 Kg sx
Estimated Usage 4,671 bbl Bentonite mud Soda Ash 20 x 200L drums
OM Seal 160 x 25 lb sx
COMMENTS Liquid Casing 160 x 25 lb sx
IDCIDE L 16 x 25l Kegs
IDVIS 40 x 25 Kg sx

Technical Authority For Dowell


(Signiture) (signiture)
Sheet10

IDVIS
IDCIDE L
Rhodamine Dye
OM Seal
Liquid Casing

Technical Authority For Dowell


(Signiture) (signiture)
Sheet11

Mud Blender

Mud 1. Mud 2. Resultant Blend

VOL (any unit) 3195 VOL 805 VOL 4000


% OIL 49 % OIL 53 % OIL 50
% WTR 27 % WTR 29 % WTR 27
% SOLS 24 % SOLS 18 % SOLS 23
WPS (g/l) 126 WPS (g/l) 150 WPS (g/l) 131
WT (any unit) 1.57 WT 1.29 WT 1.510
CORF 1.124 CORF 1.124 CORF 1.124
OIL VOL 1566 OIL VOL 427 OIL VOL 1992
WTR VOL 863 WTR VOL 233 WTR VOL 1096
SOL VOL 767 SOL VOL 145 SOL VOL 912

OWR 64 36 OWR 65 35.366 OWR 65


Mud 3 Mud 4 Resultant Blend
VOL (any unit) 0 VOL 0 VOL 0
% OIL 42 % OIL 100 % OIL ###
% WTR 40 % WTR 0 % WTR ###
% SOLS 18 % SOLS 0 % SOLS ###
WPS (g/l) 184 WPS (g/l) 0 WPS (g/l) ###
WT (any unit) 12.55 WT 6.50 WT ###
CORF 1.124 CORF 1.124 CORF ###
OIL VOL 0 OIL VOL 0 OIL VOL ###
WTR VOL 0 WTR VOL 0 WTR VOL ###
SOL VOL 0 SOL VOL 0 SOL VOL ###

OWR ### ### OWR ### ### OWR ###

Page 82
Sheet11

35

###

Page 83
BP CLYDE Schlumberger Dowell A28 (18)

SECTION 3
CONCLUSIONS AND RECOMMENDATIONS

A28 Lessons Learned 03/24/2020 84


BP CLYDE Schlumberger Dowell A28 (18)

Hole Size : 8½" Mud Type : Brine/ Ultidrill

Engineers on the section : Keith Thomson/ Stuart Trotter/ John Neary/ Nozar Ras

Item Highlights/ Low Lights Description

1 Lost circulation in Reduced losses to manageable


abandonment phase. levels with L.C.M. pills. Losses
gradually increased again with
time.
2 Mud rheology low when it New mud sent out to rig. Shear
arrived on rig. required to obtain full benefit from
Truvis HT.

3 Packstock unable to get to RIH with a bit and scraper and


bottom through mud which circulated and conditioned mud for
had been static in the well 6 hours. Packstock RIH with no
for 10 days. problems.
4 No cuttings beds appeared The Ultidrill cleaned the hole very
to form and no problems well without the need to pump high
with drag or differential viscosity pills.
sticking occured.

5 Screen consumption lower The use of 30 mesh top screens on


than expected the VSM 200's considerably
extended the life span of the bottom
shaker screens.

6 Centrifuge did not perform The centrifuge solids discharge


well. contained 10 times more H.G.S than
L.G.S.

7 Performance of VSM 200 Shale shakers performed very well.


shale shakers.

8 Mud sampling. Mud samples were sent into Dowell


for testing at downhole
temperatures and pressures.

A28 Lessons Learned 03/24/2020 85


BP CLYDE Schlumberger Dowell A28 (18)

Keith Thomson/ Stuart Trotter/ John Neary/ Nozar Rastani

Recommended action

Use same formulation in future, pumping


more pills as required. Look for a possible
substitute for Liquid Casing as it is not
stable at 300F
If new mud is sent out for the start of any
future wells then it should be sheared
through the rigs high shear system
utilising the rig pumps while still on
surface.
Do not leave mud to sit for this length of
time if possible. RIH with a scraper first
the next time. Also refer to point 2.

Use same formulation in future.

Use the same screen sizes in this hole


section on future wells.

New pulleys were ordered in January to


speed up the centrifuges and thereby
improve their performance but had not
arrived when the well finished at the end
of May. It is recommended that high speed
centrifuges be installed for future drilling
operations.
The performance of the VSM 200's gave a
reduction in the Oil on Cuttings figure
compared to previous Clyde wells and
also due to their higher cuttings removal
efficiency less dilution volume and
chemicals were required.
This established a trend and identified the
need to continually dilute the system due
to the adverse effects of the high B.H.T. on
the mud properties.

A28 Lessons Learned 03/24/2020 86


Sheet12

Schlumberger Dowell

Well 211/12a SW1 8 1/2

Lessons Learned & Basis of Design


Mud Weight:

The 9 5/8" casing will be set in the base cretaceous (in order to mitigate against the zero kick tolerance
with 1.55 s.g. mud weight if drilling through the upper MSM with 12 1/4"). The 8 1/2" section mud
weight will be 1.63 s.g.

1.63 s.g. = 7075 psi with riser on (6,800 psi with riser off) in the upper MSM reservoir

The P 50 pressure is 6,600 psi and the P 05 pressure is 7,500 psi. The EMW is therefore 1,000 psi above
the P50 case and 1,000 psi lower than the P05 case. Revised P05 data is expected before we drill the 8
1/2" section. The nearby water injectors have been switched off to attempt to reduce the maximum
anticipated pressure. If the P05 case is encountered the mud weight will be increased to a maximum case
of 1.85 s.g. If this occurs the 7" drilling liner will be set in the B shale barrier between the upper and
lower MSM.

The 7" liner will now be set in the LKCF shale at TVD 3193m , MD 4376m (above the LK80)

Differential Sticking & Mud Losses

The high overbalance in the MSM A could lead to differential sticking and or high mud losses. It is
essential that the following mud properties are maintained:

1. Tight fluid loss : <= 2.0 mls Regular addition of TRUFLO 100 and Soltex
2. Thin Slick filter cake : <=1 as above
3. High emulsion stability >= 400 V Maintain level of EMUL HT as programmed
4. LGS < 6.0 % w/v Use 230 mesh screens throughout section and
centrifuge.

The use of IDCARB sweeps throughout low pressured formation sections has been proven to be highly
effective. This will be continued in this well by a programme of IDCARB sweeps to be pumped
throughout the depleted / low pressure zone:

30 bbls of (20 ppb IDCARB 75 + 20 ppb IDCARB 150) to be pumped every 30 m.

At the high overbalances expected , it is possible that static seepage

Page 87
30 bbls of (20 ppb IDCARB 75 + 20 ppb IDCARB 150) to be pumped every 30 m.

At the high overbalances expected , it is possible that static seepage


Sheet12

Schlumberger Dowell

Well 211/12a SW1 8 1/2

Lessons Learned & Basis of Design

Hole Cleaning

Hole cleaning in the 8.1/2 section :


Page 88
The 8 1/2 section will be at approx. 45 deg. throughout , there is therefore a significant chance of
cuttings bed formation. Good hole cleaning practices should be maintained and the ROP / Flow rate
recommendations shown below adhered to.
Sheet12

Hole Cleaning

Hole cleaning in the 8.1/2 section :

The 8 1/2 section will be at approx. 45 deg. throughout , there is therefore a significant chance of
cuttings bed formation. Good hole cleaning practices should be maintained and the ROP / Flow rate
recommendations shown below adhered to.

minimum flow rate : - 450 gpm

7" Drilling Liner Running and Cementing

Treatment or conditioning of the mud immediately prior to TD is to be avoided. Alteration of the


mud properties for cementing and liner should be completed as early as possible in the section. The
YP and gels should be maintained in the lower end of the programmed values for liner running and
cementing. Last minute treatments tend to increase the possibility of Barite sag. Reduction in
rheology should be achieved using base fluid additions incorporating all the treatment additives
required for the formulation as required. ULTIDRILL DEFLOC should not be used unless authorised by
the beach. During the cement job , the liner should be rotated to maximise removal of mud from
behind casing. Cement spacer contaminated ULTIDRILL should be isolated in a separate pit for
subsequent treatment and not returned to the main active system.

Page 89
Sheet12

Page 90
Sheet12

t the zero kick tolerance


e 8 1/2" section mud

eservoir

therefore 1,000 psi above


ed before we drill the 8
educe the maximum
reased to a maximum case
etween the upper and

bove the LK80)

igh mud losses. It is

d Soltex

grammed
ion and

been proven to be highly


eps to be pumped

0 m.

Page 91
0 m.

Sheet12

Page 92
a significant chance of
and the ROP / Flow rate
Sheet12

a significant chance of
and the ROP / Flow rate

ded. Alteration of the


ssible in the section. The
es for liner running and
e sag. Reduction in
e treatment additives
sed unless authorised by
removal of mud from
n a separate pit for

Page 93
Sheet12

Page 94
Sheet13

Schlumberger Dowell

Well 211/12a SW1 8 1/2 Section

Product Load Out 8 1/2

The following load out is for guidance purposes only. The actual load out should be generated

by the drilling team offshore. Orders should be discussed with Dowell onshore first to ensure
maximum efficiency in logistics. The drill rep. will place orders with SF materials who will
place the order on Dowell Drilling Fluids. Actual load out should take into account materials already

on board

Chemical Requirements
Product Quantity Unit Comments
ULTIDRILL MUD 1881 x bbls
ULTIDRILL BASE FLUID 400 x bbls
ULTIDRILL EMUL HT 16 x 200 l Drm.
LIME 120 x 25 Kg sx.
TRUVIS HT 80 x 25 Kg sx.
SOLTEX 120 x 25 Kg sx.
TRUFLO 100 120 x 25 Kg sx.

Page 95
Sheet13

Contingency Chemicals
Product Quantity Unit Comments
ULTIDRILL LO-RM 4 x 200 l Drm. If required
ULTIDRILL DEFLOC 4 x 200 l Drm. If required
BARITE 0 as required If required
MICA (M/F) 80 x 25 Kg sx. If required
LIQUID CASING 80 x 25 lb sx. If required
TRUVIS HT 80 x 25 Kg sx. If required
OM SEAL 80 x 40 lb sx. If required
ULTIDRILL OW 8 x 200 l Drm. If required
ULTIDRILL BASE FLUID 300 x bbls If required
CALCIUM CHLORIDE (83%) 120 x 25 Kg sx. If required
IDCARB 75 240 x 25 Kg sx.
IDCARB 150 240 x 25 Kg sx.

Page 96
Sheet13

erated

rials already

Page 97
Sheet13

Page 98
Sheet14

Overbalance Calculator

Length Depth Datum Point Hydrostatic Estimated Overpressure Annular ECD


m m psi F.Press Pres.Loss

3271 Meters 3271 7210 7664 psi 7210 454 psi 300 psi 1.715 sg

0 Meters 3190 7214 0 psi 3736.9 ### psi 200 psi ### ###

0 Meters 3050 2900 0 psi -424.5 425 psi


0 Meters 3050 3200 0 psi -124.5 125 psi
Mud Weight 1.65 sg

Pressure grad. 1.09 psi/m

Page 99
Sheet14

-654.2 1.42 -1552.7906

Meters Static psi ecd psi


3271 7664 7964
2616.8 6131 6411

1962.6 4598 4858

1308.4 3066 3306

654.2 1533 1753


0 0 200

Page 100
Sheet15

Pit Management

Stage Status Hole Vol Riser Vol Surface Vol. Petro Cont.Vol. Total mud Total Storage Mud Type
Active Pit Vol isolated active Backload Pits
1 Drill out cement 847-997 183 bbl 316 bbl 200 bbl 0 bbl 0 bbl 1,800 bbl SW&Sweeps

2 Displace to WBM 183 bbl 316 bbl 200 bbl 699 bbl 699 bbl 801 bbl WBM

3 RIH to 1157m and circ.out Petro 220 bbl 316 bbl 200 bbl 38 bbl 74 bbl 736 bbl 810 bbl 726 bbl WBM

4 Make cut at 1077m and top cut 201 bbl 316 bbl 200 bbl 38 bbl 74 bbl 717 bbl 791 bbl 726 bbl WBM
5 RIH with packer and circ ot Petro 361 bbl 316 bbl 200 bbl 198 bbl 394 bbl 877 bbl 1271 bbl 426 bbl WBM
6 pull 9 5/8" casing 361 bbl 316 bbl 200 bbl 198 bbl 394 bbl 877 bbl 1271 bbl 426 bbl WBM

7 RIH and set cement plugs 351 bbl 316 bbl 200 bbl 198 bbl 394 bbl 867 bbl 1261 bbl 426 bbl WBM

8 Drill out cement 932-967 365 bbl 316 bbl 200 bbl 198 bbl 394 bbl 881 bbl 1275 bbl 412 bbl WBM

Page 101
Sheet15

9 Backload cont.Dump xs WBM 365 bbl 316 bbl 0 bbl 0 bbl 0 bbl 681 bbl 0 bbl 0 bbl WBM
10 Clean pits , take on ULTIDRILL 365 bbl 316 bbl 0 bbl 0 bbl 0 bbl 681 bbl 0 bbl 1,000 bbl Ultidrill
11 Displace to ULTIDRILL 365 bbl 316 bbl 200 bbl 0 bbl 681 bbl 881 bbl 681 bbl 119 bbl Ultidrill
12 Bacload WBM , Take on 800 ULT. 365 bbl 316 bbl 200 bbl 0 bbl 0 bbl 881 bbl 0 bbl 919 bbl Ultidrill
Notes:
1. The above scenario assumes that a single cut and pull is made. If multiple cuts are made , the degree of contamination of the WBM will increase
with the number of cut and pull operations. In each case , the Displaced Petrofree and heavily contaminated WBM each side of the slug
should be isolated from the active WBM system in order to minimise contamination of the whole active system.

2. It is almost certain that at least 400 bbls of Petrofree / WBM mix will be produced , and possibly the entire WBM system will be contaminated.
From a pit logistics perspective and the requirment to clean the pits after WBM prior to ULTIDRILL. The backload of WBM and the load out of ULTDRILL
would proceed as follows:
a, Surface Volume of contaminated mud backloaded and uncontaminated WBM dumped
b, Surface Pits for ULTIDRILL cleaned
c, Approx 1000 bbls ULTIDRILL taken on board in clean pits
d, Displace Hole to ULTIDRILL , take contaminated WBM to "dirty" pits
e, Backload contaminated WBM
f, Clean Pits
g, Take on Further 800 bbls ULTIDRILL

3. Boats would be required along side for steps a to g

Page 102
Sheet15

Boat
Required

Page 103
Sheet15

X
X
X
X

WBM will increase

contaminated.
oad out of ULTDRILL

Page 104

You might also like