CHANGES DETAILS DATE WIRTE APPROVE

Rev_00 DX200A Model DEC.11.2014 S.W. YUN S.W. YUN

DX200A
CONTENTS PAGE

1. GENERAL SPECIFICATION ........................................................................ 2

2. ENGINE SYSTEM ....................................................................................... 3

3. HYDRAULIC SYSTEM ................................................................................ 3

4. SWING MECHANISM .................................................................................. 4

5. TRAVEL SYSTEM........................................................................................ 4

6. UNDER CARRIAGE .................................................................................... 4

7. HYDRAULIC CYLINDERS ........................................................................... 5

8. FRONT ........................................................................................................ 6

9. DIMENSIONS AND WORKING RANGE ...................................................... 9

10. LIFTING CAPACITIES ............................................................................. 11

11. PERFORMANCE DATA ........................................................................... 15

12. NOISE LEVEL ......................................................................................... 15

13. SUB GROUP WEIGHT ............................................................................ 15

14. USER SERVICE DATA ............................................................................ 16

MODEL DX200A DWG No K1025586 1/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
1. GENERAL SPECIFICATION
[DX200A]
ITEMS UNIT STD. OPT. 1 OPT. 2
OPERATING WEIGHT ton 20.6 20.5 21.1
3
BUCKET CAPACITY (SAE) m 0.92 0.92 0.92
RATED POWER PS/rpm 150/1900
ENGINE
MAX. TORQUE kg.m/rp 61.5/1400
m 2
kg/cm
SYSTEM PRESSURE (WORK/TRAVEL) 350 / 350
SWING SPEED rpm 11.3
TRAVEL SPEED (High/Low) km/h 5.8/3.2
GRADEABILITY %(deg) 70 (35)
SHOE WIDTH mm 600 800

2
GROUND PRESSURE kg/cm 0.48 0.37
DIGGING BUCKET ton 15.2  
FORCE ARM ton 10.8 12.6 10.8
MAX. DIGGING REACH mm 9900 9480 9900
MAX. DIGGING DEPTH mm 6620 6110 6620
WORKING
RANGE MAX. DIGGING HEIGHT mm 9750 9630 9750
REAR SWING RADIUS mm 2750  
MIN. SWING RADIUS mm 3410  
OVERALL LENGTH mm 9485 9500 9485
OVERALL WIDTH mm 2800  3000
OVERALL WIDTH (Narrow) mm - - -
TRANSPOR
OVERALL HEIGHT mm 3005 3110 3005
- TATION
DIMENSION GROUND CLEARANCE mm 480  
TRACK LENGTH mm 4065  
TRACK GAUGE mm 2200  
TRACK GAUGE (Narrow) mm - - -
 BOOM : STD. 5700mm
 ARM : STD. 2900mm, SHORT 2400mm,
OPTION ATTACHMENT
 BUCKET (PCSA) : STD. 0.92 m3
OPT. 0.81 m3
 SHOE : 600mm(G), 800mm(G)
 STANDARD : STD. BOOM(5700mm), STD. ARM(2900mm), STD. BUCKET(0.92 m3), 600mm shoe
 OPTION 1 : STD. BOOM(5700mm), SHORT ARM(2400mm), OPT. BUCKET(0.92 m3), 600mm shoe
 OPTION 2 : STD. BOOM(5700mm), STD. ARM(2900mm), STD. BUCKET(0.92 m3), 800mm shoe

MODEL DX200A DWG No K1025586 2/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
2. ENGINE SYSTEM

1) ENGINE
MAKER & MODEL : DOOSAN DB58TIS

RATED HORSE POWER :

GROSS POWER : 115 kW(157 PS, 154 HP) @1900rpm (SAE J1995)
NET POWER : 110 kW( 150 PS,148 HP) @1900rpm (SAE J1349)

MAX. TORQUE : 61.5 kgf.m @ 1400 rpm

DISPLACEMENT : 5785 cc
No. OF CYLINDER : 6
BORE DIA. & STROKE : Φ 102 x 118 mm

2) ALTERNATOR
VOLTAGE : 24 V
RATING AMPERES : 60 A

3) BATTERY
SYSTEM VOLTAGE : 24 V
QUANTITY : 12 V x 2
CAPACITY (AMP) : 100 AH

3. HYDRAULIC SYSTEM

1) MAIN PUMP
DISPLACEMENT : 2 x 117.0 cc/rev
MAX. FLOW RATE : 2 x 222.3 Liter/min

2) PILOT PUMP
DISPLACEMENT : 15 cc/rev
MAX. FLOW RATE : 28.5 Liter/min

3) CONTROL VALVE
RELIEF VALVE PRESSURE : 350 kgf/cm2
PORT RELIEF VALVE PRESSURE : 360 kgf/cm2

MODEL DX200A DWG No K1025586 3/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
4. SWING MECHANISM
1) SWING PERFORMANCE
MAX. SWING SPEED (EFF.=0.99) : 11.3 rpm
MAX. SWING TORQUE (EFF.=0.77) : 6,460 kgf.m

5. TRAVEL SYSTEM

1) TRAVELLING PERFORMANCE
TRAVELLING SPEED (EFF.=96/95%) : 3.2 / 5.8 km/hr
TRACTION FORCE (EFF.=79/77%) : 23.1 / 12.2 ton

6. UNDER CARRIAGE

1) ROLLERS ; LOWER
FLANGE TYPE : SINGLE
Q'TY PER SIDE : 7 ea – STD TRACK

2) ROLLERS ; UPPER
FLANGE TYPE : SHAFT
Q'TY PER SIDE : 2 ea

3) TRACK SHOE
MAKER : HYUNDAI STEEL
No. OF SHOE PER SIDE : 45 ea

SHOE WIDTH (mm) GROUND PRESSURE (kgf/cm2) MACHINE WEIGHT (ton)

STD. 600G 0.48 20.6
OPT. 800G 0.37 21.1

MODEL DX200A DWG No K1025586 4/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
7. HYDRAULIC CYLINDERS

BOOM ARM BUCKET

QUANTITY 2 1 1
BORE 120 135 120
STROKE 1260 1450 1060
ROD DIA. 85 95 80
CLOSED LENGTH 1782 2010 1630
HEAD END CUSHION X O X
ROD END CUSHION O O O

MODEL DX200A DWG No K1025586 5/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
8. FRONT

1) FRONT LINK PIN SIZES

POINT DIA. (mm) LENGTH (mm) SLR FRONT (D/L)

A 90 782 
B 80 196 
C 80 782 
D 90 519 
E 80 220 
F 80 219 
G 71 425 65/354
H 80 507 65/424
I 80 205 65/187
J 80 425 65/354
K 80 507 65/424

MODEL DX200A DWG No K1025586 6/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
 2) FRONT ATTACHMENTS
2-1) BOOM
LENGTH (mm) WEIGHT (kg)
STD. BOOM 5700 1463

2-2) ARM
LENGTH
WEIGHT (kg) DIGGING FORCE
(mm)
STD. ARM 2900 656 [SAE] 10.5, [ISO] 10.8
SHORT ARM 2400 574 [SAE] 12.2 , [ISO] 12.6

2-3) BUCKET (DX200A)

CAPACITY (m3) BUCKET WIDTH (mm)
DIGGINGFORCE
CECE SAE STRUCK W/CUTTER W/O CUTTER
STD. BUCKET 0.81 0.92 0.69 1236 1172 [SAE] 13.3
OPT. BUCKET 0.72 0.81 0.62 1126 1064 [ISO] 15.2

2-4) BUCKET & ARM COMBINATIONS

C/W (ton) 3.8

SHOE
600
(mm)
Capacity (㎥) Width (mm) 5.7m Boom
Bucket Weight
Type W/O With (kg)
SAE/PCSA CECE 2.4m A 2.9m A
Cutter Cutter
0.81 0.72 1064 1126 654 A A
GP
0.92 0.81 1172 1236 707 A B
Maximum load pin-on(payload+bucket) 2829 2586

Based on ISO 10567 and SAE J296, arm length without quick change clamp
A : Suitable for materials with density of 2100kg/m³ (3500lb/yd³) or less
B : Suitable for materials with density of 1800kg/m³ (3000lb/yd³) or less
C : Suitable for materials with density of 1500kg/m³ (2500lb/yd³) or less
D : Suitable for materials with density of 1200kg/m³ (2000lb/yd³) or less
X : Not recommended

3) OPTION PIPINGS

MODEL DX200A DWG No K1025586 7/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
 3-1) ONE-WAY PIPING
MAIN & PILOT PIPING : OPTION
FRONT SUPPLY PIPING : OPTION
AVAILABLE ATTACHMENT : BREAKER

3-2) PE3C PIPING

MAIN & PILOT PIPING : OPTION
FRONT SUPPLY PIPING : OPTION
AVAILABLE ATTACHMENT : BUCKET TILT CYLINDER, CLAMSHELL
CRUSHER

3-3) PERO PIPING

MAIN & PILOT PIPING : OPTION
FRONT SUPPLY PIPING : OPTION
AVAILABLE ATTACHMENT : ROTATING GRAPPLE

MODEL DX200A DWG No K1025586 8/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
9. DIMENSIONS AND WORKING RANGE
1) DIMENSIONS

BOOM TYPE (ONE PIECE) (mm) 5700

ARM TYPE (mm) 2900 2400
3
BUCKET TYPE (PCSA) (m ) 0.92 1.05
TAIL SWING RADIUS (mm) N 2750 
SHIPPING HEIGHT (BOOM) (mm) O 2940 3045
SHIPPING HEIGHT (HOSE) (mm) P 3005 3110
SHIPPING LENGTH (mm) Q 9485 9500
SHIPPING WIDTH (mm) 2800 
C/WEIGHT CLEARANCE (mm) S 1055 
HEIGHT OVER CAB. (mm) T 2975 
HOUSE WIDTH (mm) U 2710 
CAB. HEIGHT ABOVE HOUSE (mm) V 845 
CAB. WIDTH (mm) W 960 
TUMBLER DISTANCE (mm) 3270 
TRACK LENGTH (mm) 4065 
UNDERCARRIAGE WIDTH (mm) 2800 
SHOE WIDTH (mm) a 600 
TRACK HEIGHT (mm) 947 
CAR BODY CLEARANCE (mm) c 480 

MODEL DX200A DWG No K1025586 9/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
 2) WORKING RANGE

BOOM TYPE (ONE PIECE) (mm) 5700

ARM TYPE (mm) 2900 2400
3
BUCKET TYPE (PCSA) (m ) 0.92 1.05
MAX. DIGGING REACH (mm) A 9900 9480
MAX. DIGGING REACH (GROUND) (mm) B 9730 9300
MAX. DIGGING DEPTH (mm) C 6620 6110
MAX. LOADING HEIGHT (mm) D 6990 6830
MIN. LOADING HEIGHT (mm) E 2555 3070
MAX. DIGGING HEIGHT (mm) F 9750 9630
MAX. BUCKET PIN HEIGHT (mm) G 8450 8299
MAX. VERTICAL WALL DEPTH (mm) H 5640 5390
MAX. RADIUS VERTICAL (mm) I 6410 6050
MAX. DEPTH TO 8' LINE (mm) J 6430 5910
MIN. RADIUS 8' LINE (mm) K 2865 2880
MIN. DIGGING REACH (mm) L 519 1698
MIN. SWING RADIUS (mm) M 3410 3410
BUCKET ANGLE (deg) d 166 166

MODEL DX200A DWG No K1025586 10/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
 10. LIFTING CAPACITIES
- 5.7m Boom, 2.9m Arm, 600mm SHOE, STD TRACK (1/2)
TRACK WIDTH : 2.80m (9’ 2”) STD TRACK
BOOM : 5.7m (18' 8")
ARM : 2.9m (9' 6")
BUCKET : SAE 0.92m3 HEAPED
(CECE 0.81m3)
SHOE : 600mm (24")
COUNTER WEIGHT : 3,800 kg (8,377 lb)
UNIT : 1000 kg (1000 lb)
: RATING OVER FRONT

: RATING OVER SIDE OR 360 degree

METRIC
A(m) 1 2 3 4

B(m)
8
7
6
5
4
3 *10.65 *10.65 *7.60 7.3
2 *8.55 *8.55 *8.98 6.75
1 *7.27 *7.27 *9.97 6.34
0(GROUND) *4.93 *4.93 *8.28 *8.28 10.16 6.12
1 *7.18 *7.18 *10.09 9.77 10.04 6.02
2 *8.27 *8.27 *9.39 *9.39 *12.45 9.83 10.03 6.01
3 *10.29 *10.29 *11.87 *11.87 *12.31 9.97 *9.56 6.07
4 *14.26 *14.26 *10.72 10.19 *8.45 6.21
5 *8.37 *8.37 *6.67 6.43

FEET
A(m) 5 10 15 20

B(m)
25 *7.49 *7.49
20 *8.80 *8.80
15 *9.77 8.75
10 *22.69 *22.69 *14.52 13.04 *11.33 8.16
5 *17.31 *17.31 *17.80 11.78 11.7 7.56
0(GROUND) *18.78 *18.78 17.81 11 11.21 7.11
5 *16.90 *16.90 *25.28 20.98 17.49 10.72 10.97 6.89
10 *24.37 24.37 *26.65 21.37 17.59 10.81 11.01 6.93
15 *20.69 *20.69 *14.62 11.25

1. RATINGS ARE BASED ON SAE J1097

2. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
3. * RATED LOADS ARE BASED ON HYDRAULIC CAPACITY.
4. RATED LOADS DO NOT EXCEED 87% OF HYD. CAPACITY OR 75% OF TIPPING CAPACITY.

MODEL DX200A DWG No K1025586 11/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
 - 5.7m Boom, 2.9m Arm, 600mm SHOE, STD TRACK (2/2)
TRACK WIDTH : 2.80m (9’ 2”) STD TRACK
BOOM : 5.7m (18' 8")
ARM : 2.9m (9' 6")
BUCKET : SAE 0.92m3 HEAPED
(CECE 0.81m3)
SHOE : 600mm (24")
COUNTER WEIGHT : 3,800 kg (8,377 lb)
UNIT : 1000 kg (1000 lb)
: RATING OVER FRONT

: RATING OVER SIDE OR 360 degree

METRIC
A(m) 5 6 7 8 MAX. REACH

A(m)
B(m)
8 3.00 3.00 @5.95
7 2.82 2.82 @6.86
6 4.02 4.02 3.86 3.18 2.75 2.75 @7.51
5 4.30 4.15 4.11 3.12 2.75 2.39 @7.99
4 5.27 5.27 4.72 3.98 4.35 3.03 3.58 2.34 2.80 2.15 @8.32
3 6.10 5.11 5.23 3.79 4.43 2.91 3.51 2.27 2.92 2 @8.52
2 6.93 4.8 5.54 3.6 4.3 2.79 3.43 2.2 3.02 1.91 @8.60
1 7.18 4.54 5.35 3.43 4.18 2.68 3.36 2.13 3 1.88 @8.56
0(GROUND) 6.97 4.36 5.21 3.3 4.09 2.59 3.3 2.08 3.05 1.91 @8.40
1 6.86 4.26 5.13 3.22 4.03 2.54 3.27 2.05 3.2 2.01 @8.11
2 6.82 4.23 5.09 3.19 4.01 2.52 3.49 2.19 @7.68
3 6.86 4.26 5.12 3.22 4.05 2.56 3.98 2.51 @7.09
4 6.78 4.35 5.22 3.31 4.88 3.1 @6.27
5 5.19 4.54 4.96 4.36 @5.14

FEET
A(ft) 25 MAX. REACH

A(ft)
B(ft)
25 *6.43 *6.43 @20.78
20 *6.07 *6.07 @24.46
15 8.73 5.77 *6.10 5.02 @26.74
10 8.44 5.5 *6.42 4.42 @27.94
5 8.12 5.2 6.62 4.17 @28.20
0(GROUND) 7.87 4.97 6.73 4.21 @27.56
-5 7.77 4.87 7.35 4.6 @25.94
-10 8.84 5.58 @23.14
-15 *11.06 8.14 @18.60

1. RATINGS ARE BASED ON SAE J1097

2. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
3. * RATED LOADS ARE BASED ON HYDRAULIC CAPACITY.
4. RATED LOADS DO NOT EXCEED 87% OF HYD. CAPACITY OR 75% OF TIPPING CAPACITY.

MODEL DX200A DWG No K1025586 12/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
 - OPTION 5.7m Boom, 2.4m Arm, 600mm SHOE, STD TRACK (1/2)
TRACK WIDTH : 2.80m (9’ 2”) STD TRACK
BOOM : 5.7m (18' 8")
ARM : 2.4m (7' 10")
BUCKET : SAE 0.92m3 HEAPED
(CECE 0.81m3)
SHOE : 600mm (24")
COUNTER WEIGHT : 3,800 kg (8,377 lb)
UNIT : 1000 kg (1000 lb)
: RATING OVER FRONT

: RATING OVER SIDE OR 360 degree

METRIC
A(m) 2 3 4 5

B(m)
8
7
6
5 *5.15 *5.15
4 *9.25 *9.25 *7.00 *7.00 *5.84 5.34
3 *8.43 7.1 *6.64 5.03
2 *9.68 6.61 *7.40 4.75
1 10.35 6.29 7.15 4.53
0(GROUND) *7.25 *7.25 10.18 6.15 7 4.39
1 *7.02 *7.02 *10.03 9.96 10.13 6.11 6.93 4.33
2 *10.04 *10.04 *12.71 10.06 *9.98 6.14 6.93 4.33
3 *13.33 *13.33 *11.43 10.23 *9.12 6.24 7 4.39
4 *12.02 *12.02 *9.57 *9.57 *7.74 6.41 *6.21 4.52
5 *5.42 *5.42

FEET
A(m) 5 10 15 20

B(m)
25
20 *9.87 9.02
15 *12.63 *12.63 *10.73 8.66
10 *15.92 12.79 *12.19 8.11
5 18.54 11.66 11.7 7.57
0(GROUND) *16.53 *16.53 17.85 11.06 11.29 7.2
5 *17.64 *17.64 *26.23 21.43 17.7 10.93 11.15 7.07
10 *27.47 *27.47 *24.75 21.93 *17.67 11.12 11.3 7.2
15 *17.72 *17.72 *12.68 11.72

1. RATINGS ARE BASED ON SAE J1097

2. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
3. * RATED LOADS ARE BASED ON HYDRAULIC CAPACITY.
4. RATED LOADS DO NOT EXCEED 87% OF HYD. CAPACITY OR 75% OF TIPPING CAPACITY.

MODEL DX200A DWG No K1025586 13/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
 - OPTION 5.7m Boom, 2.4m Arm, 600mm SHOE, STD TRACK (2/2)
TRACK WIDTH : 2.80m (9’ 2”) STD TRACK
BOOM : 5.7m (18' 8")
ARM : 2.4m (7' 10")
BUCKET : SAE 0.92m3 HEAPED
(CECE 0.81m3)
SHOE : 600mm (24")
COUNTER WEIGHT : 3,800 kg (8,377 lb)
UNIT : 1000 kg (1000 lb)
: RATING OVER FRONT

: RATING OVER SIDE OR 360 degree

METRIC
A(m) 6 7 8 MAX. REACH

A(m)
B(m)
8 *4.18 *4.18 @5.33
7 *4.48 4.23 *3.91 3.84 @6.31
6 *4.50 4.2 *3.89 3.14 *3.80 3.11 @7.03
5 *4.75 4.1 *4.51 3.1 *3.79 2.68 @7.54
4 *5.15 3.94 4.54 3.02 3.67 2.4 @7.89
3 *5.63 3.77 4.43 2.91 3.52 2.29 3.44 2.23 @8.10
2 5.52 3.59 4.31 2.8 3.46 2.23 3.33 2.14 @8.18
1 5.36 3.45 4.21 2.71 3.4 2.17 3.31 2.11 @8.14
0(GROUND) 5.25 3.35 4.13 2.64 3.38 2.15 @7.97
1 5.19 3.29 4.1 2.61 3.58 2.27 @7.67
2 5.19 3.29 4.11 2.62 3.94 2.51 @7.21
3 5.24 3.34 4.59 2.94 @6.57
4 *5.20 3.76 @5.68
5 *4.84 *4.84 @4.39

FEET
A(ft) 25 MAX. REACH

A(ft)
B(ft)
25 *8.94 *8.94 @18.84
20 *8.38 6.99 @22.85
15 8.69 5.74 *8.41 5.62 @25.28
10 8.46 5.53 7.61 4.94 @26.54
5 8.19 5.28 7.29 4.67 @26.82
0(GROUND) 7.99 5.1 7.46 4.75 @26.14
-5 8.25 5.25 @24.43
-10 10.21 6.54 @21.43
-15 *11.18 10.26 @16.42

1. RATINGS ARE BASED ON SAE J1097

2. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET.
3. * RATED LOADS ARE BASED ON HYDRAULIC CAPACITY.
4. RATED LOADS DO NOT EXCEED 87% OF HYD. CAPACITY OR 75% OF TIPPING CAPACITY.

MODEL DX200A DWG No K1025586 14/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
11. PERFORMANCE DATA
1) MAIN RELIEF PRESSURE
WORKING, TRAVEL : 350 [+10/0] kg/cm2

12. NOISE LEVEL

LWA GUARANTEED SOUND POWER LEVEL : 103 dB(A) (2000/14/EC)

MESSURED SOUND POWER LEVEL : 102 dB(A) (2000/14/EC)
LpA OPERATOR NOISE : 73 dB(A) (ISO 6396)

► ABOVE NOISE LEVEL DATA ARE TEST RESULTS OF PROTOTYPE MACHINE.

13. SUB GROUP WEIGHT

ITEM UNIT FIGURE REMARKS

UPPER STRUCTURE W/O FRONT kg 9,853 WITH COUNTER WEIGHT

COUNTER WEIGHT kg 4,100

LOWER STRUCTURE ASS'Y kg 7,635 LC TRACK

FRONT ASS'Y kg 4,012

BOOM (5.7m) kg 1,463 WITH BUSH

ARM (2.9m) kg 656 WITH BUSH

BUCKET (0.92m3) kg 700

BOOM CYL. (ea) kg 178
ARM CYL. kg 266
BUCKET CYL. kg 152
DOZER kg -
DOZER CYL. (ea) kg -
Arm 2.4m kg 574
3 3
0.51m (0.47m ) kg 529
OPTION BUCKET 3 3
0.81m (0.72m ) kg 654
COUNTER WEIGHT kg 3,800

MODEL DX200A DWG No K1025586 15/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...
14. USER SERVICE DATA
TYPE OF SERVICE INTERVAL (hr)
COMPARTMENT/ No, OF COM-
FLUID OR
GREASE JOINT C/G 10 50 250 500 1000 2000 MENTS
LUBRICANT
BUCKET JOINT PIN GREASE 6 ※△ △
BOOM/ARM JOINT PIN GREASE 11 ※△ △
SWING BEARING GREASE 2 △
SWING GEAR GREASE 1 ○
HYD. ADJUST GREASE 2 △
GREASE 1 △
SWING DEVICE
GEAR OIL 5ℓ ■ ※○ ○
TRAVEL DEVICE GEAR OIL 2x3.3ℓ ■ ※○ ○
ENGINE OIL ENGINE OIL 28ℓ ■ ※○ ○
OIL TANK ISO VG #46 195ℓ ■ ○
FUEL TANK DIESEL 400ℓ ■ ▲
RADIATOR WATER 24ℓ ■ ○
HYD. RETURN FILTER ELEMENT 1 ※○ ○
PILOT FILTER ELEMENT 1 ※○ ○
HYD. OIL SUC. FILTER STRAINER 1 □
ENGINE OIL FILTER CARTRIDGE 1 ※○ ○
ADDITIONAL DRAIN
1 ▲
WATER SEPARATOR WATER
WATER SEPARATOR CARTRIDGE 1 ▲ ○
FUEL FILTER CARTRIDGE 1 ○
ELEMENT
1 ○
(INNER)
AIR CLEANER
ELEMENT
1 □ ○
(OUTER)
RADIATOR CORE CORE 1 □
OIL COOLER CORE CORE 1 □
INTER COOLER CORE CORE 1 □
AIR-CON COND. CORE CORE 1 □
AIR BREATHER FILTER CARTRIDGE 1 ○

※ : FIRST TIME ONLY ▲ : DRAIN WATER ■ : CHECK

△ : GREASING ○ : REPLACING □ : CLEANING

MODEL DX200A DWG No K1025586 16/16

DDDOOOOOOSSSAAANNN IIINNNFFFRRRAAACCCOOORRREEE CCCOOO...,,, LLLTTTDDD...