Scribd
Upload
362 views

EC2401 - Wireless Communication Notes

This document contains notes on wireless communication from a 7th semester electronics and communication engineering course. It covers topics like frequency reuse, cellular network architecture, multiple access techniques, interference and techniques to expand cellular system capacity. It includes definitions of key terms, descriptions of different cellular concepts and technologies like FDMA, TDMA and CDMA. It also provides examples questions and assignments on analyzing wireless concepts and systems.

Uploaded by

SARAVANAN GOVINDARAJAN
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
362 views

EC2401 - Wireless Communication Notes

This document contains notes on wireless communication from a 7th semester electronics and communication engineering course. It covers topics like frequency reuse, cellular network architecture, multiple access techniques, interference and techniques to expand cellular system capacity. It includes definitions of key terms, descriptions of different cellular concepts and technologies like FDMA, TDMA and CDMA. It also provides examples questions and assignments on analyzing wireless concepts and systems.

Uploaded by

SARAVANAN GOVINDARAJAN
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

EC2401- Wireless Communication Notes VII semester ECE

Wireless Communication

PART A-UNIT 1
1. What is meant by frequency reuse?
2. What are the trends in cellular radio systems?
3. What do you mean by forward and reverse channel?
4. What is the function of control channel? What are the types?
5. What is channel assignment? What are the types?
6. What is fixed channel assignment?
7. What is dynamic channel assignment?
8. Define MS, BS and MSC.
9. Define had off and mode of hand off.
10. Write the types of hand off.
11. Define Cell, Cluster.
12. What do you mean by foot print and dwell time?
13. What are the major types of cellular interference?
14. What are the techniques used to expand the capacity of cellular system?
15. Define frequency reuse ratio.
16. Define FDMA, TDMA and CDMA.
17. Define Grade of service.
18. What is blocked call clear system(BCC)?
19. What is blocked call delay system?
20. Define cell splitting.
21. What is sectoring?
22. What are the features of TDMA?
23. What are the features of FDMA?
24. Differentiate cellular telephony and cordless telephony. Nov. 2011
25. When does a WLAN become a personal area network (PAN)? Nov. 2011
26. What are the different types of multiple access schemes? May 2012
27. Mention the significance of frequency reuse in cellular networks. May 2012
28. What is flat fading? Nov. 2012
29. Define signal to self-interference ratio. Nov. 2012
30. What are the three most important effects of small scale multipath propagation.
Nov/Dec. 2013
31.What is a multiple access technique? Nov/Dec. 2013

Prepared By A.Devasena., Associate Professor., Dept/ ECE Page 1


PART B-UNIT 1

1. i. Compare and contrast wired and wireless communication. (8) Nov. 2011
ii. Discuss briefly about the requirements of services for a wireless system.(8)
2. i. Discuss in detail the constructive and destructive interferences. (8) Nov. 2011
ii. Explain how Inter Symbol Interference is caused and how it is eliminated. (8)
3. i. Explain in detail Wide Area Data Services and Broadband Wireless Access
services offered to wireless networks. (10) May 2012
ii. What are paging systems? Explain. (6)
4. i. With a neat block diagram, explain the cellular network architecture.(10)May 2012
ii. Explain any one type of Multiple Access scheme. (6)
5. i. Explain about the factors that influence small scale fading. (10) Nov 2012

ii. Find the average fade duration for threshold levels ρ = 0.01, ρ = 0.1 and ρ = 1, when
the Doppler frequency is 200 Hz.

6. i. Write a note on Noise and Interference Limited Systems. (8) Nov. 2012
ii. Discuss the principles of cellular networks. (8)

7. i. Discuss the types of services, requirements, spectrum limitations and noise


considerations of wireless communication. Nov/Dec. 2013.
ii. Explain the principle of cellular networks and various types of Handoff techniques.
Nov/Dec. 2013.

2MARKS:

UNIT 1

1.1.What is meant by frequency reuse?

If an area is served by a single Base Station, then the available spectrum can be divided into N
frequency channels that can serve N users simultaneously. If more than N users are to be served,
multiple BSs are required, and frequency channels have to be reused in different locations . Since
Thank you for using www.freepdfconvert.com service!

Only two pages are converted. Please Sign Up to convert all pages.

https://www.freepdfconvert.com/membership

You might also like